diff options
30 files changed, 4903 insertions, 200 deletions
@@ -609,31 +609,11 @@ LIST_blackfin="$(boards_by_arch blackfin) ## SH Systems ######################################################################### -LIST_sh2=" \ - rsk7203 \ -" -LIST_sh3=" \ - mpr2 \ - ms7720se \ -" +LIST_sh2="$(boards_by_cpu sh2)" +LIST_sh3="$(boards_by_cpu sh3)" +LIST_sh4="$(boards_by_cpu sh4)" -LIST_sh4=" \ - ms7750se \ - ms7722se \ - MigoR \ - r7780mp \ - r2dplus \ - sh7763rdp \ - sh7785lcr \ - ap325rxa \ - espt \ -" - -LIST_sh=" \ - ${LIST_sh2} \ - ${LIST_sh3} \ - ${LIST_sh4} \ -" +LIST_sh="$(boards_by_arch sh)" ######################################################################### ## SPARC Systems @@ -1184,88 +1184,6 @@ bf527-ezkit-v2_config : unconfig @$(MKCONFIG) -t BF527_EZKIT_REV_2_1 \ bf527-ezkit blackfin blackfin bf527-ezkit -#======================================================================== -# SH3 (SuperH) -#======================================================================== - -######################################################################### -## sh2 (Renesas SuperH) -######################################################################### -rsk7203_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_RSK7203 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh2 rsk7203 renesas - -######################################################################### -## sh3 (Renesas SuperH) -######################################################################### - -mpr2_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_MPR2 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh3 mpr2 - -ms7720se_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh3 ms7720se - -######################################################################### -## sh4 (Renesas SuperH) -######################################################################### - -MigoR_config : unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh4 MigoR renesas - -ms7750se_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh4 ms7750se - -ms7722se_config : unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh4 ms7722se - -r2dplus_config : unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh4 r2dplus renesas - -r7780mp_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh4 r7780mp renesas - -sh7763rdp_config : unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh4 sh7763rdp renesas - -sh7785lcr_32bit_config \ -sh7785lcr_config : unconfig - @mkdir -p $(obj)include - @mkdir -p $(obj)board/renesas/sh7785lcr - @echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h - @if [ "$(findstring 32bit, $@)" ] ; then \ - echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \ - echo "CONFIG_SYS_TEXT_BASE = 0x8ff80000" > \ - $(obj)board/renesas/sh7785lcr/config.tmp ; \ - fi - @$(MKCONFIG) -n $@ -a sh7785lcr sh sh4 sh7785lcr renesas - -ap325rxa_config : unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh4 ap325rxa renesas - -espt_config : unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_ESPT 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh4 espt - ######################################################################### ######################################################################### diff --git a/arch/arm/include/asm/arch-mx5/crm_regs.h b/arch/arm/include/asm/arch-mx5/crm_regs.h index 14aa231a5b..4ed8eb31c8 100644 --- a/arch/arm/include/asm/arch-mx5/crm_regs.h +++ b/arch/arm/include/asm/arch-mx5/crm_regs.h @@ -189,4 +189,15 @@ struct mxc_ccm_reg { #define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET 0 #define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK 0x7 +/* Define the bits in register CCDR */ +#define MXC_CCM_CCDR_IPU_HS_MASK (0x1 << 17) + +/* Define the bits in register CCGRx */ +#define MXC_CCM_CCGR_CG_MASK 0x3 + +#define MXC_CCM_CCGR5_CG5_OFFSET 10 + +/* Define the bits in register CLPCR */ +#define MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS (0x1 << 18) + #endif /* __ARCH_ARM_MACH_MX51_CRM_REGS_H__ */ diff --git a/arch/sh/config.mk b/arch/sh/config.mk index 07ba68f198..415c949798 100644 --- a/arch/sh/config.mk +++ b/arch/sh/config.mk @@ -29,6 +29,6 @@ STANDALONE_LOAD_ADDR += -EB endif PLATFORM_CPPFLAGS += -DCONFIG_SH -D__SH__ -PLATFORM_LDFLAGS += -e $(CONFIG_SYS_TEXT_BASE) --defsym reloc_dst=$(TEXT_BASE) +PLATFORM_LDFLAGS += -e $(CONFIG_SYS_TEXT_BASE) --defsym reloc_dst=$(CONFIG_SYS_TEXT_BASE) LDSCRIPT := $(SRCTREE)/$(CPUDIR)/u-boot.lds diff --git a/arch/sh/lib/bootm.c b/arch/sh/lib/bootm.c index 9c58ed7ec8..f38d0b0e8e 100644 --- a/arch/sh/lib/bootm.c +++ b/arch/sh/lib/bootm.c @@ -43,6 +43,41 @@ static void hexdump(unsigned char *buf, int len) } #endif +#define MOUNT_ROOT_RDONLY 0x000 +#define RAMDISK_FLAGS 0x004 +#define ORIG_ROOT_DEV 0x008 +#define LOADER_TYPE 0x00c +#define INITRD_START 0x010 +#define INITRD_SIZE 0x014 +#define COMMAND_LINE 0x100 + +#define RD_PROMPT (1<<15) +#define RD_DOLOAD (1<<14) +#define CMD_ARG_RD_PROMPT "prompt_ramdisk=" +#define CMD_ARG_RD_DOLOAD "load_ramdisk=" + +#ifdef CONFIG_SH_SDRAM_OFFSET +#define GET_INITRD_START(initrd, linux) (initrd - linux + CONFIG_SH_SDRAM_OFFSET) +#else +#define GET_INITRD_START(initrd, linux) (initrd - linux) +#endif + +static void set_sh_linux_param(unsigned long param_addr, unsigned long data) +{ + *(unsigned long *)(param_addr) = data; +} + +static unsigned long sh_check_cmd_arg(char *cmdline, char *key, int base) +{ + unsigned long val = 0; + char *p = strstr(cmdline, key); + if (p) { + p += strlen(key); + val = simple_strtol(p, NULL, base); + } + return val; +} + int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *images) { /* Linux kernel load address */ @@ -51,7 +86,7 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima unsigned char *param = (unsigned char *)image_get_load(images->legacy_hdr_os); /* Linux kernel command line */ - char *cmdline = (char *)param + 0x100; + char *cmdline = (char *)param + COMMAND_LINE; /* PAGE_SIZE */ unsigned long size = images->ep - (unsigned long)param; char *bootargs = getenv("bootargs"); @@ -61,8 +96,37 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima /* Setup parameters */ memset(param, 0, size); /* Clear zero page */ + + /* Set commandline */ strcpy(cmdline, bootargs); + sh_check_cmd_arg(bootargs, CMD_ARG_RD_DOLOAD, 10); + /* Initrd */ + if (images->rd_start || images->rd_end) { + unsigned long ramdisk_flags = 0; + int val = sh_check_cmd_arg(bootargs, CMD_ARG_RD_PROMPT, 10); + if (val == 1) + ramdisk_flags |= RD_PROMPT; + else + ramdisk_flags &= ~RD_PROMPT; + + val = sh_check_cmd_arg(bootargs, CMD_ARG_RD_DOLOAD, 10); + if (val == 1) + ramdisk_flags |= RD_DOLOAD; + else + ramdisk_flags &= ~RD_DOLOAD; + + set_sh_linux_param((unsigned long)param + MOUNT_ROOT_RDONLY, 0x0001); + set_sh_linux_param((unsigned long)param + RAMDISK_FLAGS, ramdisk_flags); + set_sh_linux_param((unsigned long)param + ORIG_ROOT_DEV, 0x0200); + set_sh_linux_param((unsigned long)param + LOADER_TYPE, 0x0001); + set_sh_linux_param((unsigned long)param + INITRD_START, + GET_INITRD_START(images->rd_start, CONFIG_SYS_SDRAM_BASE)); + set_sh_linux_param((unsigned long)param + INITRD_SIZE, + images->rd_end - images->rd_start); + } + + /* Boot kernel */ kernel(); /* does not return */ diff --git a/board/a4m072/a4m072.c b/board/a4m072/a4m072.c index ae7ccbb4e9..09a5a5183b 100644 --- a/board/a4m072/a4m072.c +++ b/board/a4m072/a4m072.c @@ -270,8 +270,6 @@ static u8 display_buf[DISPLAY_BUF_SIZE]; static u8 display_putc_pos; static u8 display_out_pos; -static u8 display_dot_enable; - void display_set(int cmd) { if (cmd & DISPLAY_CLEAR) { @@ -281,12 +279,6 @@ void display_set(int cmd) { if (cmd & DISPLAY_HOME) { display_putc_pos = 0; } - - if (cmd & DISPLAY_MARK) { - display_dot_enable = 1; - } else { - display_dot_enable = 0; - } } #define SEG_A (1<<0) @@ -314,10 +306,12 @@ void display_set(int cmd) { * A..Z index 10..35 * - index 36 * _ index 37 + * . index 38 */ #define SYMBOL_DASH (36) #define SYMBOL_UNDERLINE (37) +#define SYMBOL_DOT (38) static u8 display_char2seg7_tbl[]= { @@ -337,28 +331,29 @@ static u8 display_char2seg7_tbl[]= SEG_B | SEG_C | SEG_D | SEG_E | SEG_G, /* d */ SEG_A | SEG_D | SEG_E | SEG_F | SEG_G, /* E */ SEG_A | SEG_E | SEG_F | SEG_G, /* F */ - SEG_A | SEG_B | SEG_C | SEG_D | SEG_F | SEG_G, /* g */ + 0, /* g - not displayed */ SEG_B | SEG_C | SEG_E | SEG_F | SEG_G, /* H */ - SEG_E | SEG_F, /* I */ - SEG_B | SEG_C | SEG_D | SEG_E, /* J */ - SEG_A, /* K - special 1 */ + SEG_B | SEG_C, /* I */ + 0, /* J - not displayed */ + 0, /* K - not displayed */ SEG_D | SEG_E | SEG_F, /* L */ - SEG_B, /* m - special 2 */ - SEG_C | SEG_E | SEG_G, /* n */ - SEG_C | SEG_D | SEG_E | SEG_G, /* o */ + 0, /* m - not displayed */ + 0, /* n - not displayed */ + SEG_A | SEG_B | SEG_C | SEG_D | SEG_E | SEG_F, /* O */ SEG_A | SEG_B | SEG_E | SEG_F | SEG_G, /* P */ - SEG_A | SEG_B | SEG_C | SEG_F | SEG_G, /* q */ - SEG_E | SEG_G, /* r */ + 0, /* q - not displayed */ + 0, /* r - not displayed */ SEG_A | SEG_C | SEG_D | SEG_F | SEG_G, /* S */ SEG_D | SEG_E | SEG_F | SEG_G, /* t */ SEG_B | SEG_C | SEG_D | SEG_E | SEG_F, /* U */ - SEG_C | SEG_D | SEG_E | SEG_F, /* V */ - SEG_C, /* w - special 3 */ - SEG_B | SEG_C | SEG_E | SEG_F | SEG_G, /* X */ + 0, /* V - not displayed */ + 0, /* w - not displayed */ + 0, /* X - not displayed */ SEG_B | SEG_C | SEG_D | SEG_F | SEG_G, /* Y */ - SEG_A | SEG_B | SEG_D | SEG_E | SEG_G, /* Z */ + 0, /* Z - not displayed */ SEG_G, /* - */ - SEG_D /* _ */ + SEG_D, /* _ */ + SEG_P /* . */ }; /* Convert char to the LED segments representation */ @@ -374,23 +369,20 @@ static u8 display_char2seg7(char c) c -= 'A' - 10; else if (c == '-') c = SYMBOL_DASH; - else if ((c == '_') || (c == '.')) + else if (c == '_') c = SYMBOL_UNDERLINE; + else if (c == '.') + c = SYMBOL_DOT; else c = ' '; /* display unsupported symbols as space */ if (c != ' ') val = display_char2seg7_tbl[(int)c]; - /* Handle DP LED here */ - if (display_dot_enable) { - val |= SEG_P; - } - return val; } -static inline int display_putc_nomark(char c) +int display_putc(char c) { if (display_putc_pos >= DISPLAY_BUF_SIZE) return -1; @@ -403,13 +395,6 @@ static inline int display_putc_nomark(char c) return c; } -int display_putc(char c) -{ - /* Mark the codes from the "display" command with the DP LED */ - display_set(DISPLAY_MARK); - return display_putc_nomark(c); -} - /* * Flush current symbol to the LED display hardware */ @@ -493,9 +478,8 @@ void show_boot_progress(int status) if (a4m072_status2code(status, buf) < 0) return; - display_set(0); /* Clear DP Led */ - display_putc_nomark(buf[0]); - display_putc_nomark(buf[1]); + display_putc(buf[0]); + display_putc(buf[1]); display_set(DISPLAY_HOME); display_out_pos = 0; /* reset output position */ diff --git a/board/renesas/sh7785lcr/config.mk b/board/renesas/sh7785lcr/config.mk index 1a9038c753..6853d2b28b 100644 --- a/board/renesas/sh7785lcr/config.mk +++ b/board/renesas/sh7785lcr/config.mk @@ -24,6 +24,8 @@ # sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp -ifndef CONFIG_SYS_TEXT_BASE +ifdef CONFIG_SH_32BIT +CONFIG_SYS_TEXT_BASE = 0x8FF80000 +else CONFIG_SYS_TEXT_BASE = 0x0ff80000 endif diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c index ce4cb78e98..071dad66c4 100644 --- a/board/ttcontrol/vision2/vision2.c +++ b/board/ttcontrol/vision2/vision2.c @@ -37,14 +37,34 @@ #include <fsl_esdhc.h> #include <fsl_pmic.h> #include <mc13892.h> +#include <linux/fb.h> DECLARE_GLOBAL_DATA_PTR; static u32 system_rev; +extern int mx51_fb_init(struct fb_videomode *mode); + #ifdef CONFIG_HW_WATCHDOG #include <watchdog.h> +static struct fb_videomode nec_nl6448bc26_09c = { + "NEC_NL6448BC26-09C", + 60, /* Refresh */ + 640, /* xres */ + 480, /* yres */ + 37650, /* pixclock = 26.56Mhz */ + 48, /* left margin */ + 16, /* right margin */ + 31, /* upper margin */ + 12, /* lower margin */ + 96, /* hsync-len */ + 2, /* vsync-len */ + 0, /* sync */ + FB_VMODE_NONINTERLACED, /* vmode */ + 0, /* flag */ +}; + void hw_watchdog_reset(void) { int val; @@ -423,6 +443,9 @@ static void setup_gpios(void) mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT3); mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, 0x82); + /* PWM Output GPIO1_2 */ + mxc_request_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT1); + /* * Set GPIO1_4 to high and output; it is used to reset * the system on reboot @@ -630,6 +653,33 @@ int board_early_init_f(void) return 0; } +static void backlight(int on) +{ + if (on) { + mxc_gpio_set(65, 1); + udelay(10000); + mxc_gpio_set(68, 1); + } else { + mxc_gpio_set(65, 0); + mxc_gpio_set(68, 0); + } +} + +void lcd_enable(void) +{ + int ret; + + mxc_request_iomux(MX51_PIN_DI1_PIN2, IOMUX_CONFIG_ALT0); + mxc_request_iomux(MX51_PIN_DI1_PIN3, IOMUX_CONFIG_ALT0); + + mxc_gpio_set(2, 1); + mxc_request_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT0); + + ret = mx51_fb_init(&nec_nl6448bc26_09c); + if (ret) + puts("LCD cannot be configured\n"); +} + int board_init(void) { #ifdef CONFIG_SYS_ARM_WITHOUT_RELOC @@ -709,3 +759,21 @@ int checkboard(void) return 0; } +int do_vision_lcd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + int on; + + if (argc < 2) + return cmd_usage(cmdtp); + + on = (strcmp(argv[1], "on") == 0); + backlight(on); + + return 0; +} + +U_BOOT_CMD( + lcdbl, CONFIG_SYS_MAXARGS, 1, do_vision_lcd, + "Vision2 Backlight", + "lcdbl [on|off]\n" +); diff --git a/boards.cfg b/boards.cfg index e8afdb13be..f9691c7928 100644 --- a/boards.cfg +++ b/boards.cfg @@ -733,5 +733,18 @@ davinci_dm6467evm arm arm926ejs dm6467evm davinci davinci davinci_schmoogie arm arm926ejs schmoogie davinci davinci davinci_dm355leopard arm arm926ejs dm355leopard davinci davinci bf527-ad7160-eval blackfin blackfin +rsk7203 sh sh2 rsk7203 renesas - +mpr2 sh sh3 mpr2 - - +ms7720se sh sh3 ms7720se - - +MigoRsh sh4 MigoR renesas - +ms7750se sh sh4 ms7750se - - +ms7722se sh sh4 ms7722se - - +r2dplus sh sh4 r2dplus renesas - +r7780mp sh sh4 r7780mp renesas - +sh7763rdp sh sh4 sh7763rdp renesas - +sh7785lcr sh sh4 sh7785lcr renesas - +sh7785lcr_32bit sh sh4 sh7785lcr renesas - sh7785lcr:SH_32BIT=1 +ap325rxa sh sh4 ap325rxa renesas - +espt sh sh4 espt - - # Target ARCH CPU Board name Vendor SoC Options ############################################################################################### diff --git a/common/usb_storage.c b/common/usb_storage.c index 613c4f0f1f..1e6cd6af27 100644 --- a/common/usb_storage.c +++ b/common/usb_storage.c @@ -70,7 +70,7 @@ /* direction table -- this indicates the direction of the data * transfer for each command code -- a 1 indicates input */ -unsigned char us_direction[256/8] = { +static const unsigned char us_direction[256/8] = { 0x28, 0x81, 0x14, 0x14, 0x20, 0x01, 0x90, 0x77, 0x0C, 0x20, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01, diff --git a/doc/README.LED_display b/doc/README.LED_display index 521746e129..19977ea7e0 100644 --- a/doc/README.LED_display +++ b/doc/README.LED_display @@ -14,7 +14,6 @@ This function should control the state of the LED display. Argument is an ORed combination of the following values: DISPLAY_CLEAR -- clear the display DISPLAY_HOME -- set the position to the beginning of display - DISPLAY_MARK -- enable mark (decimal point), if implemented int display_putc(char c); diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index 798902f337..c92c7a7a49 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -85,6 +85,17 @@ static phys_addr_t __cfi_flash_bank_addr(int i) phys_addr_t cfi_flash_bank_addr(int i) __attribute__((weak, alias("__cfi_flash_bank_addr"))); +static unsigned long __cfi_flash_bank_size(int i) +{ +#ifdef CONFIG_SYS_FLASH_BANKS_SIZES + return ((unsigned long [])CONFIG_SYS_FLASH_BANKS_SIZES)[i]; +#else + return 0; +#endif +} +unsigned long cfi_flash_bank_size(int i) + __attribute__((weak, alias("__cfi_flash_bank_size"))); + static void __flash_write8(u8 value, void *addr) { __raw_writeb(value, addr); @@ -1826,7 +1837,7 @@ static void flash_fixup_stm(flash_info_t *info, struct cfi_qry *qry) * The following code cannot be run from FLASH! * */ -ulong flash_get_size (phys_addr_t base, int banknum) +ulong flash_get_size (phys_addr_t base, int banknum, unsigned long max_size) { flash_info_t *info = &flash_info[banknum]; int i, j; @@ -1915,6 +1926,13 @@ ulong flash_get_size (phys_addr_t base, int banknum) debug ("size_ratio %d port %d bits chip %d bits\n", size_ratio, info->portwidth << CFI_FLASH_SHIFT_WIDTH, info->chipwidth << CFI_FLASH_SHIFT_WIDTH); + info->size = 1 << qry.dev_size; + /* multiply the size by the number of chips */ + info->size *= size_ratio; + if (max_size && (info->size > max_size)) { + debug("[truncated from %ldMiB]", info->size >> 20); + info->size = max_size; + } debug ("found %d erase regions\n", num_erase_regions); sect_cnt = 0; sector = base; @@ -1935,6 +1953,8 @@ ulong flash_get_size (phys_addr_t base, int banknum) debug ("erase_region_count = %d erase_region_size = %d\n", erase_region_count, erase_region_size); for (j = 0; j < erase_region_count; j++) { + if (sector - base >= info->size) + break; if (sect_cnt >= CONFIG_SYS_MAX_FLASH_SECT) { printf("ERROR: too many flash sectors\n"); break; @@ -1968,9 +1988,6 @@ ulong flash_get_size (phys_addr_t base, int banknum) } info->sector_count = sect_cnt; - info->size = 1 << qry.dev_size; - /* multiply the size by the number of chips */ - info->size *= size_ratio; info->buffer_size = 1 << le16_to_cpu(qry.max_buf_write_size); tmp = 1 << qry.block_erase_timeout_typ; info->erase_blk_tout = tmp * @@ -2026,7 +2043,8 @@ unsigned long flash_init (void) flash_info[i].flash_id = FLASH_UNKNOWN; if (!flash_detect_legacy(cfi_flash_bank_addr(i), i)) - flash_get_size(cfi_flash_bank_addr(i), i); + flash_get_size(cfi_flash_bank_addr(i), i, + cfi_flash_bank_size(i)); size += flash_info[i].size; if (flash_info[i].flash_id == FLASH_UNKNOWN) { #ifndef CONFIG_SYS_FLASH_QUIET_TEST diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index f44fc4e3c4..982f96e8b8 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -205,12 +205,12 @@ static int handshake(uint32_t *ptr, uint32_t mask, uint32_t done, int usec) uint32_t result; do { result = ehci_readl(ptr); + udelay(5); if (result == ~(uint32_t)0) return -1; result &= mask; if (result == done) return 0; - udelay(1); usec--; } while (usec > 0); return -1; diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 047902a0c1..cff3438929 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -53,6 +53,10 @@ int ehci_hcd_init(void) hcor = (struct ehci_hcor *)((uint32_t) hccr + HC_LENGTH(ehci_readl(&hccr->cr_capbase))); + debug("EHCI-PCI init hccr 0x%x and hcor 0x%x hc_length %d\n", + (uint32_t)hccr, (uint32_t)hcor, + (uint32_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase))); + return 0; } diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index d3aa55b4a6..945ab64f95 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -175,7 +175,7 @@ struct qTD { uint32_t qt_buffer_hi[5]; /* Appendix B */ /* pad struct for 32 byte alignment */ uint32_t unused[3]; -} __attribute__ ((aligned (32))); +}; /* Queue Head (QH). */ struct QH { diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 6fe2c39bce..545ebf4b50 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -76,7 +76,7 @@ void musb_start(void) * epinfo - Pointer to EP configuration table * cnt - Number of entries in the EP conf table. */ -void musb_configure_ep(struct musb_epinfo *epinfo, u8 cnt) +void musb_configure_ep(const struct musb_epinfo *epinfo, u8 cnt) { u16 csr; u16 fifoaddr = 64; /* First 64 bytes of FIFO reserved for EP0 */ diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 8f73876f80..a8adcce00f 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -357,7 +357,7 @@ extern struct musb_regs *musbr; /* exported functions */ extern void musb_start(void); -extern void musb_configure_ep(struct musb_epinfo *epinfo, u8 cnt); +extern void musb_configure_ep(const struct musb_epinfo *epinfo, u8 cnt); extern void write_fifo(u8 ep, u32 length, void *fifo_data); extern void read_fifo(u8 ep, u32 length, void *fifo_data); diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c index f38b279096..8b0c61d642 100644 --- a/drivers/usb/musb/musb_hcd.c +++ b/drivers/usb/musb/musb_hcd.c @@ -29,7 +29,7 @@ #define USB_MSC_BBB_GET_MAX_LUN 0xFE /* Endpoint configuration information */ -static struct musb_epinfo epinfo[3] = { +static const struct musb_epinfo epinfo[3] = { {MUSB_BULK_EP, 1, 512}, /* EP1 - Bluk Out - 512 Bytes */ {MUSB_BULK_EP, 0, 512}, /* EP1 - Bluk In - 512 Bytes */ {MUSB_INTR_EP, 0, 64} /* EP2 - Interrupt IN - 64 Bytes */ @@ -41,7 +41,7 @@ static int rh_devnum; static u32 port_status; /* Device descriptor */ -static u8 root_hub_dev_des[] = { +static const u8 root_hub_dev_des[] = { 0x12, /* __u8 bLength; */ 0x01, /* __u8 bDescriptorType; Device */ 0x00, /* __u16 bcdUSB; v1.1 */ @@ -63,7 +63,7 @@ static u8 root_hub_dev_des[] = { }; /* Configuration descriptor */ -static u8 root_hub_config_des[] = { +static const u8 root_hub_config_des[] = { 0x09, /* __u8 bLength; */ 0x02, /* __u8 bDescriptorType; Configuration */ 0x19, /* __u16 wTotalLength; */ @@ -96,14 +96,14 @@ static u8 root_hub_config_des[] = { 0xff /* __u8 ep_bInterval; 255 ms */ }; -static unsigned char root_hub_str_index0[] = { +static const unsigned char root_hub_str_index0[] = { 0x04, /* __u8 bLength; */ 0x03, /* __u8 bDescriptorType; String-descriptor */ 0x09, /* __u8 lang ID */ 0x04, /* __u8 lang ID */ }; -static unsigned char root_hub_str_index1[] = { +static const unsigned char root_hub_str_index1[] = { 0x1c, /* __u8 bLength; */ 0x03, /* __u8 bDescriptorType; String-descriptor */ 'M', /* __u8 Unicode */ @@ -557,7 +557,7 @@ static int musb_submit_rh_msg(struct usb_device *dev, unsigned long pipe, int len = 0; int stat = 0; u32 datab[4]; - u8 *data_buf = (u8 *) datab; + const u8 *data_buf = (u8 *) datab; u16 bmRType_bReq; u16 wValue; u16 wIndex; @@ -778,25 +778,27 @@ static int musb_submit_rh_msg(struct usb_device *dev, unsigned long pipe, break; - case RH_GET_DESCRIPTOR | RH_CLASS: + case RH_GET_DESCRIPTOR | RH_CLASS: { + u8 *_data_buf = (u8 *) datab; debug("RH_GET_DESCRIPTOR | RH_CLASS\n"); - data_buf[0] = 0x09; /* min length; */ - data_buf[1] = 0x29; - data_buf[2] = 0x1; /* 1 port */ - data_buf[3] = 0x01; /* per-port power switching */ - data_buf[3] |= 0x10; /* no overcurrent reporting */ + _data_buf[0] = 0x09; /* min length; */ + _data_buf[1] = 0x29; + _data_buf[2] = 0x1; /* 1 port */ + _data_buf[3] = 0x01; /* per-port power switching */ + _data_buf[3] |= 0x10; /* no overcurrent reporting */ /* Corresponds to data_buf[4-7] */ - data_buf[4] = 0; - data_buf[5] = 5; - data_buf[6] = 0; - data_buf[7] = 0x02; - data_buf[8] = 0xff; + _data_buf[4] = 0; + _data_buf[5] = 5; + _data_buf[6] = 0; + _data_buf[7] = 0x02; + _data_buf[8] = 0xff; len = min_t(unsigned int, leni, min_t(unsigned int, data_buf[0], wLength)); break; + } case RH_GET_CONFIGURATION: debug("RH_GET_CONFIGURATION\n"); diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 4be82e7396..5b7b261268 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -34,6 +34,7 @@ COBJS-$(CONFIG_VIDEO_CT69000) += ct69000.o videomodes.o COBJS-$(CONFIG_VIDEO_MB862xx) += mb862xx.o videomodes.o COBJS-$(CONFIG_VIDEO_MB86R0xGDC) += mb86r0xgdc.o videomodes.o COBJS-$(CONFIG_VIDEO_MX3) += mx3fb.o +COBJS-$(CONFIG_VIDEO_MX5) += mxc_ipuv3_fb.o ipu_common.o ipu_disp.o COBJS-$(CONFIG_VIDEO_SED13806) += sed13806.o COBJS-$(CONFIG_SED156X) += sed156x.o COBJS-$(CONFIG_VIDEO_SM501) += sm501.o diff --git a/drivers/video/ipu.h b/drivers/video/ipu.h new file mode 100644 index 0000000000..d8bc287d84 --- /dev/null +++ b/drivers/video/ipu.h @@ -0,0 +1,321 @@ +/* + * Porting to u-boot: + * + * (C) Copyright 2010 + * Stefano Babic, DENX Software Engineering, sbabic@denx.de + * + * Linux IPU driver for MX51: + * + * (C) Copyright 2005-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_IPU_H__ +#define __ASM_ARCH_IPU_H__ + +#include <linux/types.h> + +#define IDMA_CHAN_INVALID 0xFF +#define HIGH_RESOLUTION_WIDTH 1024 + +struct clk { + const char *name; + int id; + /* Source clock this clk depends on */ + struct clk *parent; + /* Secondary clock to enable/disable with this clock */ + struct clk *secondary; + /* Current clock rate */ + unsigned long rate; + /* Reference count of clock enable/disable */ + __s8 usecount; + /* Register bit position for clock's enable/disable control. */ + u8 enable_shift; + /* Register address for clock's enable/disable control. */ + void *enable_reg; + u32 flags; + /* + * Function ptr to recalculate the clock's rate based on parent + * clock's rate + */ + void (*recalc) (struct clk *); + /* + * Function ptr to set the clock to a new rate. The rate must match a + * supported rate returned from round_rate. Leave blank if clock is not + * programmable + */ + int (*set_rate) (struct clk *, unsigned long); + /* + * Function ptr to round the requested clock rate to the nearest + * supported rate that is less than or equal to the requested rate. + */ + unsigned long (*round_rate) (struct clk *, unsigned long); + /* + * Function ptr to enable the clock. Leave blank if clock can not + * be gated. + */ + int (*enable) (struct clk *); + /* + * Function ptr to disable the clock. Leave blank if clock can not + * be gated. + */ + void (*disable) (struct clk *); + /* Function ptr to set the parent clock of the clock. */ + int (*set_parent) (struct clk *, struct clk *); +}; + +/* + * Enumeration of Synchronous (Memory-less) panel types + */ +typedef enum { + IPU_PANEL_SHARP_TFT, + IPU_PANEL_TFT, +} ipu_panel_t; + +/* IPU Pixel format definitions */ +#define fourcc(a, b, c, d)\ + (((__u32)(a)<<0)|((__u32)(b)<<8)|((__u32)(c)<<16)|((__u32)(d)<<24)) + +/* + * Pixel formats are defined with ASCII FOURCC code. The pixel format codes are + * the same used by V4L2 API. + */ + +#define IPU_PIX_FMT_GENERIC fourcc('I', 'P', 'U', '0') +#define IPU_PIX_FMT_GENERIC_32 fourcc('I', 'P', 'U', '1') +#define IPU_PIX_FMT_LVDS666 fourcc('L', 'V', 'D', '6') +#define IPU_PIX_FMT_LVDS888 fourcc('L', 'V', 'D', '8') + +#define IPU_PIX_FMT_RGB332 fourcc('R', 'G', 'B', '1') /*< 8 RGB-3-3-2 */ +#define IPU_PIX_FMT_RGB555 fourcc('R', 'G', 'B', 'O') /*< 16 RGB-5-5-5 */ +#define IPU_PIX_FMT_RGB565 fourcc('R', 'G', 'B', 'P') /*< 1 6 RGB-5-6-5 */ +#define IPU_PIX_FMT_RGB666 fourcc('R', 'G', 'B', '6') /*< 18 RGB-6-6-6 */ +#define IPU_PIX_FMT_BGR666 fourcc('B', 'G', 'R', '6') /*< 18 BGR-6-6-6 */ +#define IPU_PIX_FMT_BGR24 fourcc('B', 'G', 'R', '3') /*< 24 BGR-8-8-8 */ +#define IPU_PIX_FMT_RGB24 fourcc('R', 'G', 'B', '3') /*< 24 RGB-8-8-8 */ +#define IPU_PIX_FMT_BGR32 fourcc('B', 'G', 'R', '4') /*< 32 BGR-8-8-8-8 */ +#define IPU_PIX_FMT_BGRA32 fourcc('B', 'G', 'R', 'A') /*< 32 BGR-8-8-8-8 */ +#define IPU_PIX_FMT_RGB32 fourcc('R', 'G', 'B', '4') /*< 32 RGB-8-8-8-8 */ +#define IPU_PIX_FMT_RGBA32 fourcc('R', 'G', 'B', 'A') /*< 32 RGB-8-8-8-8 */ +#define IPU_PIX_FMT_ABGR32 fourcc('A', 'B', 'G', 'R') /*< 32 ABGR-8-8-8-8 */ + +/* YUV Interleaved Formats */ +#define IPU_PIX_FMT_YUYV fourcc('Y', 'U', 'Y', 'V') /*< 16 YUV 4:2:2 */ +#define IPU_PIX_FMT_UYVY fourcc('U', 'Y', 'V', 'Y') /*< 16 YUV 4:2:2 */ +#define IPU_PIX_FMT_Y41P fourcc('Y', '4', '1', 'P') /*< 12 YUV 4:1:1 */ +#define IPU_PIX_FMT_YUV444 fourcc('Y', '4', '4', '4') /*< 24 YUV 4:4:4 */ + +/* two planes -- one Y, one Cb + Cr interleaved */ +#define IPU_PIX_FMT_NV12 fourcc('N', 'V', '1', '2') /* 12 Y/CbCr 4:2:0 */ + +#define IPU_PIX_FMT_GREY fourcc('G', 'R', 'E', 'Y') /*< 8 Greyscale */ +#define IPU_PIX_FMT_YVU410P fourcc('Y', 'V', 'U', '9') /*< 9 YVU 4:1:0 */ +#define IPU_PIX_FMT_YUV410P fourcc('Y', 'U', 'V', '9') /*< 9 YUV 4:1:0 */ +#define IPU_PIX_FMT_YVU420P fourcc('Y', 'V', '1', '2') /*< 12 YVU 4:2:0 */ +#define IPU_PIX_FMT_YUV420P fourcc('I', '4', '2', '0') /*< 12 YUV 4:2:0 */ +#define IPU_PIX_FMT_YUV420P2 fourcc('Y', 'U', '1', '2') /*< 12 YUV 4:2:0 */ +#define IPU_PIX_FMT_YVU422P fourcc('Y', 'V', '1', '6') /*< 16 YVU 4:2:2 */ +#define IPU_PIX_FMT_YUV422P fourcc('4', '2', '2', 'P') /*< 16 YUV 4:2:2 */ + +/* + * IPU Driver channels definitions. + * Note these are different from IDMA channels + */ +#define IPU_MAX_CH 32 +#define _MAKE_CHAN(num, v_in, g_in, a_in, out) \ + ((num << 24) | (v_in << 18) | (g_in << 12) | (a_in << 6) | out) +#define _MAKE_ALT_CHAN(ch) (ch | (IPU_MAX_CH << 24)) +#define IPU_CHAN_ID(ch) (ch >> 24) +#define IPU_CHAN_ALT(ch) (ch & 0x02000000) +#define IPU_CHAN_ALPHA_IN_DMA(ch) ((uint32_t) (ch >> 6) & 0x3F) +#define IPU_CHAN_GRAPH_IN_DMA(ch) ((uint32_t) (ch >> 12) & 0x3F) +#define IPU_CHAN_VIDEO_IN_DMA(ch) ((uint32_t) (ch >> 18) & 0x3F) +#define IPU_CHAN_OUT_DMA(ch) ((uint32_t) (ch & 0x3F)) +#define NO_DMA 0x3F +#define ALT 1 + +/* + * Enumeration of IPU logical channels. An IPU logical channel is defined as a + * combination of an input (memory to IPU), output (IPU to memory), and/or + * secondary input IDMA channels and in some cases an Image Converter task. + * Some channels consist of only an input or output. + */ +typedef enum { + CHAN_NONE = -1, + + MEM_DC_SYNC = _MAKE_CHAN(7, 28, NO_DMA, NO_DMA, NO_DMA), + MEM_DC_ASYNC = _MAKE_CHAN(8, 41, NO_DMA, NO_DMA, NO_DMA), + MEM_BG_SYNC = _MAKE_CHAN(9, 23, NO_DMA, 51, NO_DMA), + MEM_FG_SYNC = _MAKE_CHAN(10, 27, NO_DMA, 31, NO_DMA), + + MEM_BG_ASYNC0 = _MAKE_CHAN(11, 24, NO_DMA, 52, NO_DMA), + MEM_FG_ASYNC0 = _MAKE_CHAN(12, 29, NO_DMA, 33, NO_DMA), + MEM_BG_ASYNC1 = _MAKE_ALT_CHAN(MEM_BG_ASYNC0), + MEM_FG_ASYNC1 = _MAKE_ALT_CHAN(MEM_FG_ASYNC0), + + DIRECT_ASYNC0 = _MAKE_CHAN(13, NO_DMA, NO_DMA, NO_DMA, NO_DMA), + DIRECT_ASYNC1 = _MAKE_CHAN(14, NO_DMA, NO_DMA, NO_DMA, NO_DMA), + +} ipu_channel_t; + +/* + * Enumeration of types of buffers for a logical channel. + */ +typedef enum { + IPU_OUTPUT_BUFFER = 0, /*< Buffer for output from IPU */ + IPU_ALPHA_IN_BUFFER = 1, /*< Buffer for input to IPU */ + IPU_GRAPH_IN_BUFFER = 2, /*< Buffer for input to IPU */ + IPU_VIDEO_IN_BUFFER = 3, /*< Buffer for input to IPU */ + IPU_INPUT_BUFFER = IPU_VIDEO_IN_BUFFER, + IPU_SEC_INPUT_BUFFER = IPU_GRAPH_IN_BUFFER, +} ipu_buffer_t; + +#define IPU_PANEL_SERIAL 1 +#define IPU_PANEL_PARALLEL 2 + +struct ipu_channel { + u8 video_in_dma; + u8 alpha_in_dma; + u8 graph_in_dma; + u8 out_dma; +}; + +enum ipu_dmfc_type { + DMFC_NORMAL = 0, + DMFC_HIGH_RESOLUTION_DC, + DMFC_HIGH_RESOLUTION_DP, + DMFC_HIGH_RESOLUTION_ONLY_DP, +}; + + +/* + * Union of initialization parameters for a logical channel. + */ +typedef union { + struct { + uint32_t di; + unsigned char interlaced; + } mem_dc_sync; + struct { + uint32_t temp; + } mem_sdc_fg; + struct { + uint32_t di; + unsigned char interlaced; + uint32_t in_pixel_fmt; + uint32_t out_pixel_fmt; + unsigned char alpha_chan_en; + } mem_dp_bg_sync; + struct { + uint32_t temp; + } mem_sdc_bg; + struct { + uint32_t di; + unsigned char interlaced; + uint32_t in_pixel_fmt; + uint32_t out_pixel_fmt; + unsigned char alpha_chan_en; + } mem_dp_fg_sync; +} ipu_channel_params_t; + +/* + * Bitfield of Display Interface signal polarities. + */ +typedef struct { + unsigned datamask_en:1; + unsigned ext_clk:1; + unsigned interlaced:1; + unsigned odd_field_first:1; + unsigned clksel_en:1; + unsigned clkidle_en:1; + unsigned data_pol:1; /* true = inverted */ + unsigned clk_pol:1; /* true = rising edge */ + unsigned enable_pol:1; + unsigned Hsync_pol:1; /* true = active high */ + unsigned Vsync_pol:1; +} ipu_di_signal_cfg_t; + +typedef enum { + RGB, + YCbCr, + YUV +} ipu_color_space_t; + +/* Common IPU API */ +int32_t ipu_init_channel(ipu_channel_t channel, ipu_channel_params_t *params); +void ipu_uninit_channel(ipu_channel_t channel); + +int32_t ipu_init_channel_buffer(ipu_channel_t channel, ipu_buffer_t type, + uint32_t pixel_fmt, + uint16_t width, uint16_t height, + uint32_t stride, + dma_addr_t phyaddr_0, dma_addr_t phyaddr_1, + uint32_t u_offset, uint32_t v_offset); + +int32_t ipu_update_channel_buffer(ipu_channel_t channel, ipu_buffer_t type, + uint32_t bufNum, dma_addr_t phyaddr); + +int32_t ipu_is_channel_busy(ipu_channel_t channel); +void ipu_clear_buffer_ready(ipu_channel_t channel, ipu_buffer_t type, + uint32_t bufNum); +int32_t ipu_enable_channel(ipu_channel_t channel); +int32_t ipu_disable_channel(ipu_channel_t channel); + +int32_t ipu_init_sync_panel(int disp, + uint32_t pixel_clk, + uint16_t width, uint16_t height, + uint32_t pixel_fmt, + uint16_t h_start_width, uint16_t h_sync_width, + uint16_t h_end_width, uint16_t v_start_width, + uint16_t v_sync_width, uint16_t v_end_width, + uint32_t v_to_h_sync, ipu_di_signal_cfg_t sig); + +int32_t ipu_disp_set_global_alpha(ipu_channel_t channel, unsigned char enable, + uint8_t alpha); +int32_t ipu_disp_set_color_key(ipu_channel_t channel, unsigned char enable, + uint32_t colorKey); + +uint32_t bytes_per_pixel(uint32_t fmt); + +void clk_enable(struct clk *clk); +void clk_disable(struct clk *clk); +u32 clk_get_rate(struct clk *clk); +int clk_set_rate(struct clk *clk, unsigned long rate); +long clk_round_rate(struct clk *clk, unsigned long rate); +int clk_set_parent(struct clk *clk, struct clk *parent); +int clk_get_usecount(struct clk *clk); +struct clk *clk_get_parent(struct clk *clk); + +void ipu_dump_registers(void); +int ipu_probe(void); + +void ipu_dmfc_init(int dmfc_type, int first); +void ipu_init_dc_mappings(void); +void ipu_dmfc_set_wait4eot(int dma_chan, int width); +void ipu_dc_init(int dc_chan, int di, unsigned char interlaced); +void ipu_dc_uninit(int dc_chan); +void ipu_dp_dc_enable(ipu_channel_t channel); +int ipu_dp_init(ipu_channel_t channel, uint32_t in_pixel_fmt, + uint32_t out_pixel_fmt); +void ipu_dp_uninit(ipu_channel_t channel); +void ipu_dp_dc_disable(ipu_channel_t channel, unsigned char swap); +ipu_color_space_t format_to_colorspace(uint32_t fmt); + +#endif diff --git a/drivers/video/ipu_common.c b/drivers/video/ipu_common.c new file mode 100644 index 0000000000..9d20c864ba --- /dev/null +++ b/drivers/video/ipu_common.c @@ -0,0 +1,1183 @@ +/* + * Porting to u-boot: + * + * (C) Copyright 2010 + * Stefano Babic, DENX Software Engineering, sbabic@denx.de + * + * Linux IPU driver for MX51: + * + * (C) Copyright 2005-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* #define DEBUG */ +#include <common.h> +#include <linux/types.h> +#include <linux/err.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/crm_regs.h> +#include "ipu.h" +#include "ipu_regs.h" + +extern struct mxc_ccm_reg *mxc_ccm; +extern u32 *ipu_cpmem_base; + +struct ipu_ch_param_word { + uint32_t data[5]; + uint32_t res[3]; +}; + +struct ipu_ch_param { + struct ipu_ch_param_word word[2]; +}; + +#define ipu_ch_param_addr(ch) (((struct ipu_ch_param *)ipu_cpmem_base) + (ch)) + +#define _param_word(base, w) \ + (((struct ipu_ch_param *)(base))->word[(w)].data) + +#define ipu_ch_param_set_field(base, w, bit, size, v) { \ + int i = (bit) / 32; \ + int off = (bit) % 32; \ + _param_word(base, w)[i] |= (v) << off; \ + if (((bit) + (size) - 1) / 32 > i) { \ + _param_word(base, w)[i + 1] |= (v) >> (off ? (32 - off) : 0); \ + } \ +} + +#define ipu_ch_param_mod_field(base, w, bit, size, v) { \ + int i = (bit) / 32; \ + int off = (bit) % 32; \ + u32 mask = (1UL << size) - 1; \ + u32 temp = _param_word(base, w)[i]; \ + temp &= ~(mask << off); \ + _param_word(base, w)[i] = temp | (v) << off; \ + if (((bit) + (size) - 1) / 32 > i) { \ + temp = _param_word(base, w)[i + 1]; \ + temp &= ~(mask >> (32 - off)); \ + _param_word(base, w)[i + 1] = \ + temp | ((v) >> (off ? (32 - off) : 0)); \ + } \ +} + +#define ipu_ch_param_read_field(base, w, bit, size) ({ \ + u32 temp2; \ + int i = (bit) / 32; \ + int off = (bit) % 32; \ + u32 mask = (1UL << size) - 1; \ + u32 temp1 = _param_word(base, w)[i]; \ + temp1 = mask & (temp1 >> off); \ + if (((bit)+(size) - 1) / 32 > i) { \ + temp2 = _param_word(base, w)[i + 1]; \ + temp2 &= mask >> (off ? (32 - off) : 0); \ + temp1 |= temp2 << (off ? (32 - off) : 0); \ + } \ + temp1; \ +}) + + +void clk_enable(struct clk *clk) +{ + if (clk) { + if (clk->usecount++ == 0) { + clk->enable(clk); + } + } +} + +void clk_disable(struct clk *clk) +{ + if (clk) { + if (!(--clk->usecount)) { + if (clk->disable) + clk->disable(clk); + } + } +} + +int clk_get_usecount(struct clk *clk) +{ + if (clk == NULL) + return 0; + + return clk->usecount; +} + +u32 clk_get_rate(struct clk *clk) +{ + if (!clk) + return 0; + + return clk->rate; +} + +struct clk *clk_get_parent(struct clk *clk) +{ + if (!clk) + return 0; + + return clk->parent; +} + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + if (clk && clk->set_rate) + clk->set_rate(clk, rate); + return clk->rate; +} + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + if (clk == NULL || !clk->round_rate) + return 0; + + return clk->round_rate(clk, rate); +} + +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + clk->parent = parent; + if (clk->set_parent) + return clk->set_parent(clk, parent); + return 0; +} + +static int clk_ipu_enable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(clk->enable_reg); + reg |= MXC_CCM_CCGR_CG_MASK << clk->enable_shift; + __raw_writel(reg, clk->enable_reg); + + /* Handshake with IPU when certain clock rates are changed. */ + reg = __raw_readl(&mxc_ccm->ccdr); + reg &= ~MXC_CCM_CCDR_IPU_HS_MASK; + __raw_writel(reg, &mxc_ccm->ccdr); + + /* Handshake with IPU when LPM is entered as its enabled. */ + reg = __raw_readl(&mxc_ccm->clpcr); + reg &= ~MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS; + __raw_writel(reg, &mxc_ccm->clpcr); + + return 0; +} + +static void clk_ipu_disable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(clk->enable_reg); + reg &= ~(MXC_CCM_CCGR_CG_MASK << clk->enable_shift); + __raw_writel(reg, clk->enable_reg); + + /* + * No handshake with IPU whe dividers are changed + * as its not enabled. + */ + reg = __raw_readl(&mxc_ccm->ccdr); + reg |= MXC_CCM_CCDR_IPU_HS_MASK; + __raw_writel(reg, &mxc_ccm->ccdr); + + /* No handshake with IPU when LPM is entered as its not enabled. */ + reg = __raw_readl(&mxc_ccm->clpcr); + reg |= MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS; + __raw_writel(reg, &mxc_ccm->clpcr); +} + + +static struct clk ipu_clk = { + .name = "ipu_clk", + .rate = 133000000, + .enable_reg = (u32 *)(MXC_CCM_BASE + + offsetof(struct mxc_ccm_reg, CCGR5)), + .enable_shift = MXC_CCM_CCGR5_CG5_OFFSET, + .enable = clk_ipu_enable, + .disable = clk_ipu_disable, + .usecount = 0, +}; + +/* Globals */ +struct clk *g_ipu_clk; +unsigned char g_ipu_clk_enabled; +struct clk *g_di_clk[2]; +struct clk *g_pixel_clk[2]; +unsigned char g_dc_di_assignment[10]; +uint32_t g_channel_init_mask; +uint32_t g_channel_enable_mask; + +static int ipu_dc_use_count; +static int ipu_dp_use_count; +static int ipu_dmfc_use_count; +static int ipu_di_use_count[2]; + +u32 *ipu_cpmem_base; +u32 *ipu_dc_tmpl_reg; + +/* Static functions */ + +static inline void ipu_ch_param_set_high_priority(uint32_t ch) +{ + ipu_ch_param_mod_field(ipu_ch_param_addr(ch), 1, 93, 2, 1); +}; + +static inline uint32_t channel_2_dma(ipu_channel_t ch, ipu_buffer_t type) +{ + return ((uint32_t) ch >> (6 * type)) & 0x3F; +}; + +/* Either DP BG or DP FG can be graphic window */ +static inline int ipu_is_dp_graphic_chan(uint32_t dma_chan) +{ + return (dma_chan == 23 || dma_chan == 27); +} + +static inline int ipu_is_dmfc_chan(uint32_t dma_chan) +{ + return ((dma_chan >= 23) && (dma_chan <= 29)); +} + + +static inline void ipu_ch_param_set_buffer(uint32_t ch, int bufNum, + dma_addr_t phyaddr) +{ + ipu_ch_param_mod_field(ipu_ch_param_addr(ch), 1, 29 * bufNum, 29, + phyaddr / 8); +}; + +#define idma_is_valid(ch) (ch != NO_DMA) +#define idma_mask(ch) (idma_is_valid(ch) ? (1UL << (ch & 0x1F)) : 0) +#define idma_is_set(reg, dma) (__raw_readl(reg(dma)) & idma_mask(dma)) + +static void ipu_pixel_clk_recalc(struct clk *clk) +{ + u32 div = __raw_readl(DI_BS_CLKGEN0(clk->id)); + if (div == 0) + clk->rate = 0; + else + clk->rate = (clk->parent->rate * 16) / div; +} + +static unsigned long ipu_pixel_clk_round_rate(struct clk *clk, + unsigned long rate) +{ + u32 div, div1; + u32 tmp; + /* + * Calculate divider + * Fractional part is 4 bits, + * so simply multiply by 2^4 to get fractional part. + */ + tmp = (clk->parent->rate * 16); + div = tmp / rate; + + if (div < 0x10) /* Min DI disp clock divider is 1 */ + div = 0x10; + if (div & ~0xFEF) + div &= 0xFF8; + else { + div1 = div & 0xFE0; + if ((tmp/div1 - tmp/div) < rate / 4) + div = div1; + else + div &= 0xFF8; + } + return (clk->parent->rate * 16) / div; +} + +static int ipu_pixel_clk_set_rate(struct clk *clk, unsigned long rate) +{ + u32 div = (clk->parent->rate * 16) / rate; + + __raw_writel(div, DI_BS_CLKGEN0(clk->id)); + + /* Setup pixel clock timing */ + __raw_writel((div / 16) << 16, DI_BS_CLKGEN1(clk->id)); + + clk->rate = (clk->parent->rate * 16) / div; + return 0; +} + +static int ipu_pixel_clk_enable(struct clk *clk) +{ + u32 disp_gen = __raw_readl(IPU_DISP_GEN); + disp_gen |= clk->id ? DI1_COUNTER_RELEASE : DI0_COUNTER_RELEASE; + __raw_writel(disp_gen, IPU_DISP_GEN); + + return 0; +} + +static void ipu_pixel_clk_disable(struct clk *clk) +{ + u32 disp_gen = __raw_readl(IPU_DISP_GEN); + disp_gen &= clk->id ? ~DI1_COUNTER_RELEASE : ~DI0_COUNTER_RELEASE; + __raw_writel(disp_gen, IPU_DISP_GEN); + +} + +static int ipu_pixel_clk_set_parent(struct clk *clk, struct clk *parent) +{ + u32 di_gen = __raw_readl(DI_GENERAL(clk->id)); + + if (parent == g_ipu_clk) + di_gen &= ~DI_GEN_DI_CLK_EXT; + else if (!IS_ERR(g_di_clk[clk->id]) && parent == g_di_clk[clk->id]) + di_gen |= DI_GEN_DI_CLK_EXT; + else + return -EINVAL; + + __raw_writel(di_gen, DI_GENERAL(clk->id)); + ipu_pixel_clk_recalc(clk); + return 0; +} + +static struct clk pixel_clk[] = { + { + .name = "pixel_clk", + .id = 0, + .recalc = ipu_pixel_clk_recalc, + .set_rate = ipu_pixel_clk_set_rate, + .round_rate = ipu_pixel_clk_round_rate, + .set_parent = ipu_pixel_clk_set_parent, + .enable = ipu_pixel_clk_enable, + .disable = ipu_pixel_clk_disable, + .usecount = 0, + }, + { + .name = "pixel_clk", + .id = 1, + .recalc = ipu_pixel_clk_recalc, + .set_rate = ipu_pixel_clk_set_rate, + .round_rate = ipu_pixel_clk_round_rate, + .set_parent = ipu_pixel_clk_set_parent, + .enable = ipu_pixel_clk_enable, + .disable = ipu_pixel_clk_disable, + .usecount = 0, + }, +}; + +/* + * This function resets IPU + */ +void ipu_reset(void) +{ + u32 *reg; + u32 value; + + reg = (u32 *)SRC_BASE_ADDR; + value = __raw_readl(reg); + value = value | SW_IPU_RST; + __raw_writel(value, reg); +} + +/* + * This function is called by the driver framework to initialize the IPU + * hardware. + * + * @param dev The device structure for the IPU passed in by the + * driver framework. + * + * @return Returns 0 on success or negative error code on error + */ +int ipu_probe(void) +{ + unsigned long ipu_base; + u32 temp; + + u32 *reg_hsc_mcd = (u32 *)MIPI_HSC_BASE_ADDR; + u32 *reg_hsc_mxt_conf = (u32 *)(MIPI_HSC_BASE_ADDR + 0x800); + + __raw_writel(0xF00, reg_hsc_mcd); + + /* CSI mode reserved*/ + temp = __raw_readl(reg_hsc_mxt_conf); + __raw_writel(temp | 0x0FF, reg_hsc_mxt_conf); + + temp = __raw_readl(reg_hsc_mxt_conf); + __raw_writel(temp | 0x10000, reg_hsc_mxt_conf); + + ipu_base = IPU_CTRL_BASE_ADDR; + ipu_cpmem_base = (u32 *)(ipu_base + IPU_CPMEM_REG_BASE); + ipu_dc_tmpl_reg = (u32 *)(ipu_base + IPU_DC_TMPL_REG_BASE); + + g_pixel_clk[0] = &pixel_clk[0]; + g_pixel_clk[1] = &pixel_clk[1]; + + g_ipu_clk = &ipu_clk; + debug("ipu_clk = %u\n", clk_get_rate(g_ipu_clk)); + + ipu_reset(); + + clk_set_parent(g_pixel_clk[0], g_ipu_clk); + clk_set_parent(g_pixel_clk[1], g_ipu_clk); + clk_enable(g_ipu_clk); + + g_di_clk[0] = NULL; + g_di_clk[1] = NULL; + + __raw_writel(0x807FFFFF, IPU_MEM_RST); + while (__raw_readl(IPU_MEM_RST) & 0x80000000) + ; + + ipu_init_dc_mappings(); + + __raw_writel(0, IPU_INT_CTRL(5)); + __raw_writel(0, IPU_INT_CTRL(6)); + __raw_writel(0, IPU_INT_CTRL(9)); + __raw_writel(0, IPU_INT_CTRL(10)); + + /* DMFC Init */ + ipu_dmfc_init(DMFC_NORMAL, 1); + + /* Set sync refresh channels as high priority */ + __raw_writel(0x18800000L, IDMAC_CHA_PRI(0)); + + /* Set MCU_T to divide MCU access window into 2 */ + __raw_writel(0x00400000L | (IPU_MCU_T_DEFAULT << 18), IPU_DISP_GEN); + + clk_disable(g_ipu_clk); + + return 0; +} + +void ipu_dump_registers(void) +{ + debug("IPU_CONF = \t0x%08X\n", __raw_readl(IPU_CONF)); + debug("IDMAC_CONF = \t0x%08X\n", __raw_readl(IDMAC_CONF)); + debug("IDMAC_CHA_EN1 = \t0x%08X\n", + __raw_readl(IDMAC_CHA_EN(0))); + debug("IDMAC_CHA_EN2 = \t0x%08X\n", + __raw_readl(IDMAC_CHA_EN(32))); + debug("IDMAC_CHA_PRI1 = \t0x%08X\n", + __raw_readl(IDMAC_CHA_PRI(0))); + debug("IDMAC_CHA_PRI2 = \t0x%08X\n", + __raw_readl(IDMAC_CHA_PRI(32))); + debug("IPU_CHA_DB_MODE_SEL0 = \t0x%08X\n", + __raw_readl(IPU_CHA_DB_MODE_SEL(0))); + debug("IPU_CHA_DB_MODE_SEL1 = \t0x%08X\n", + __raw_readl(IPU_CHA_DB_MODE_SEL(32))); + debug("DMFC_WR_CHAN = \t0x%08X\n", + __raw_readl(DMFC_WR_CHAN)); + debug("DMFC_WR_CHAN_DEF = \t0x%08X\n", + __raw_readl(DMFC_WR_CHAN_DEF)); + debug("DMFC_DP_CHAN = \t0x%08X\n", + __raw_readl(DMFC_DP_CHAN)); + debug("DMFC_DP_CHAN_DEF = \t0x%08X\n", + __raw_readl(DMFC_DP_CHAN_DEF)); + debug("DMFC_IC_CTRL = \t0x%08X\n", + __raw_readl(DMFC_IC_CTRL)); + debug("IPU_FS_PROC_FLOW1 = \t0x%08X\n", + __raw_readl(IPU_FS_PROC_FLOW1)); + debug("IPU_FS_PROC_FLOW2 = \t0x%08X\n", + __raw_readl(IPU_FS_PROC_FLOW2)); + debug("IPU_FS_PROC_FLOW3 = \t0x%08X\n", + __raw_readl(IPU_FS_PROC_FLOW3)); + debug("IPU_FS_DISP_FLOW1 = \t0x%08X\n", + __raw_readl(IPU_FS_DISP_FLOW1)); +} + +/* + * This function is called to initialize a logical IPU channel. + * + * @param channel Input parameter for the logical channel ID to init. + * + * @param params Input parameter containing union of channel + * initialization parameters. + * + * @return Returns 0 on success or negative error code on fail + */ +int32_t ipu_init_channel(ipu_channel_t channel, ipu_channel_params_t *params) +{ + int ret = 0; + uint32_t ipu_conf; + + debug("init channel = %d\n", IPU_CHAN_ID(channel)); + + if (g_ipu_clk_enabled == 0) { + g_ipu_clk_enabled = 1; + clk_enable(g_ipu_clk); + } + + + if (g_channel_init_mask & (1L << IPU_CHAN_ID(channel))) { + printf("Warning: channel already initialized %d\n", + IPU_CHAN_ID(channel)); + } + + ipu_conf = __raw_readl(IPU_CONF); + + switch (channel) { + case MEM_DC_SYNC: + if (params->mem_dc_sync.di > 1) { + ret = -EINVAL; + goto err; + } + + g_dc_di_assignment[1] = params->mem_dc_sync.di; + ipu_dc_init(1, params->mem_dc_sync.di, + params->mem_dc_sync.interlaced); + ipu_di_use_count[params->mem_dc_sync.di]++; + ipu_dc_use_count++; + ipu_dmfc_use_count++; + break; + case MEM_BG_SYNC: + if (params->mem_dp_bg_sync.di > 1) { + ret = -EINVAL; + goto err; + } + + g_dc_di_assignment[5] = params->mem_dp_bg_sync.di; + ipu_dp_init(channel, params->mem_dp_bg_sync.in_pixel_fmt, + params->mem_dp_bg_sync.out_pixel_fmt); + ipu_dc_init(5, params->mem_dp_bg_sync.di, + params->mem_dp_bg_sync.interlaced); + ipu_di_use_count[params->mem_dp_bg_sync.di]++; + ipu_dc_use_count++; + ipu_dp_use_count++; + ipu_dmfc_use_count++; + break; + case MEM_FG_SYNC: + ipu_dp_init(channel, params->mem_dp_fg_sync.in_pixel_fmt, + params->mem_dp_fg_sync.out_pixel_fmt); + + ipu_dc_use_count++; + ipu_dp_use_count++; + ipu_dmfc_use_count++; + break; + default: + printf("Missing channel initialization\n"); + break; + } + + /* Enable IPU sub module */ + g_channel_init_mask |= 1L << IPU_CHAN_ID(channel); + if (ipu_dc_use_count == 1) + ipu_conf |= IPU_CONF_DC_EN; + if (ipu_dp_use_count == 1) + ipu_conf |= IPU_CONF_DP_EN; + if (ipu_dmfc_use_count == 1) + ipu_conf |= IPU_CONF_DMFC_EN; + if (ipu_di_use_count[0] == 1) { + ipu_conf |= IPU_CONF_DI0_EN; + } + if (ipu_di_use_count[1] == 1) { + ipu_conf |= IPU_CONF_DI1_EN; + } + + __raw_writel(ipu_conf, IPU_CONF); + +err: + return ret; +} + +/* + * This function is called to uninitialize a logical IPU channel. + * + * @param channel Input parameter for the logical channel ID to uninit. + */ +void ipu_uninit_channel(ipu_channel_t channel) +{ + uint32_t reg; + uint32_t in_dma, out_dma = 0; + uint32_t ipu_conf; + + if ((g_channel_init_mask & (1L << IPU_CHAN_ID(channel))) == 0) { + debug("Channel already uninitialized %d\n", + IPU_CHAN_ID(channel)); + return; + } + + /* + * Make sure channel is disabled + * Get input and output dma channels + */ + in_dma = channel_2_dma(channel, IPU_OUTPUT_BUFFER); + out_dma = channel_2_dma(channel, IPU_VIDEO_IN_BUFFER); + + if (idma_is_set(IDMAC_CHA_EN, in_dma) || + idma_is_set(IDMAC_CHA_EN, out_dma)) { + printf( + "Channel %d is not disabled, disable first\n", + IPU_CHAN_ID(channel)); + return; + } + + ipu_conf = __raw_readl(IPU_CONF); + + /* Reset the double buffer */ + reg = __raw_readl(IPU_CHA_DB_MODE_SEL(in_dma)); + __raw_writel(reg & ~idma_mask(in_dma), IPU_CHA_DB_MODE_SEL(in_dma)); + reg = __raw_readl(IPU_CHA_DB_MODE_SEL(out_dma)); + __raw_writel(reg & ~idma_mask(out_dma), IPU_CHA_DB_MODE_SEL(out_dma)); + + switch (channel) { + case MEM_DC_SYNC: + ipu_dc_uninit(1); + ipu_di_use_count[g_dc_di_assignment[1]]--; + ipu_dc_use_count--; + ipu_dmfc_use_count--; + break; + case MEM_BG_SYNC: + ipu_dp_uninit(channel); + ipu_dc_uninit(5); + ipu_di_use_count[g_dc_di_assignment[5]]--; + ipu_dc_use_count--; + ipu_dp_use_count--; + ipu_dmfc_use_count--; + break; + case MEM_FG_SYNC: + ipu_dp_uninit(channel); + ipu_dc_use_count--; + ipu_dp_use_count--; + ipu_dmfc_use_count--; + break; + default: + break; + } + + g_channel_init_mask &= ~(1L << IPU_CHAN_ID(channel)); + + if (ipu_dc_use_count == 0) + ipu_conf &= ~IPU_CONF_DC_EN; + if (ipu_dp_use_count == 0) + ipu_conf &= ~IPU_CONF_DP_EN; + if (ipu_dmfc_use_count == 0) + ipu_conf &= ~IPU_CONF_DMFC_EN; + if (ipu_di_use_count[0] == 0) { + ipu_conf &= ~IPU_CONF_DI0_EN; + } + if (ipu_di_use_count[1] == 0) { + ipu_conf &= ~IPU_CONF_DI1_EN; + } + + __raw_writel(ipu_conf, IPU_CONF); + + if (ipu_conf == 0) { + clk_disable(g_ipu_clk); + g_ipu_clk_enabled = 0; + } + +} + +static inline void ipu_ch_param_dump(int ch) +{ +#ifdef DEBUG + struct ipu_ch_param *p = ipu_ch_param_addr(ch); + debug("ch %d word 0 - %08X %08X %08X %08X %08X\n", ch, + p->word[0].data[0], p->word[0].data[1], p->word[0].data[2], + p->word[0].data[3], p->word[0].data[4]); + debug("ch %d word 1 - %08X %08X %08X %08X %08X\n", ch, + p->word[1].data[0], p->word[1].data[1], p->word[1].data[2], + p->word[1].data[3], p->word[1].data[4]); + debug("PFS 0x%x, ", + ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 85, 4)); + debug("BPP 0x%x, ", + ipu_ch_param_read_field(ipu_ch_param_addr(ch), 0, 107, 3)); + debug("NPB 0x%x\n", + ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 78, 7)); + + debug("FW %d, ", + ipu_ch_param_read_field(ipu_ch_param_addr(ch), 0, 125, 13)); + debug("FH %d, ", + ipu_ch_param_read_field(ipu_ch_param_addr(ch), 0, 138, 12)); + debug("Stride %d\n", + ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 102, 14)); + + debug("Width0 %d+1, ", + ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 116, 3)); + debug("Width1 %d+1, ", + ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 119, 3)); + debug("Width2 %d+1, ", + ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 122, 3)); + debug("Width3 %d+1, ", + ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 125, 3)); + debug("Offset0 %d, ", + ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 128, 5)); + debug("Offset1 %d, ", + ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 133, 5)); + debug("Offset2 %d, ", + ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 138, 5)); + debug("Offset3 %d\n", + ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 143, 5)); +#endif +} + +static inline void ipu_ch_params_set_packing(struct ipu_ch_param *p, + int red_width, int red_offset, + int green_width, int green_offset, + int blue_width, int blue_offset, + int alpha_width, int alpha_offset) +{ + /* Setup red width and offset */ + ipu_ch_param_set_field(p, 1, 116, 3, red_width - 1); + ipu_ch_param_set_field(p, 1, 128, 5, red_offset); + /* Setup green width and offset */ + ipu_ch_param_set_field(p, 1, 119, 3, green_width - 1); + ipu_ch_param_set_field(p, 1, 133, 5, green_offset); + /* Setup blue width and offset */ + ipu_ch_param_set_field(p, 1, 122, 3, blue_width - 1); + ipu_ch_param_set_field(p, 1, 138, 5, blue_offset); + /* Setup alpha width and offset */ + ipu_ch_param_set_field(p, 1, 125, 3, alpha_width - 1); + ipu_ch_param_set_field(p, 1, 143, 5, alpha_offset); +} + +static void ipu_ch_param_init(int ch, + uint32_t pixel_fmt, uint32_t width, + uint32_t height, uint32_t stride, + uint32_t u, uint32_t v, + uint32_t uv_stride, dma_addr_t addr0, + dma_addr_t addr1) +{ + uint32_t u_offset = 0; + uint32_t v_offset = 0; + struct ipu_ch_param params; + + memset(¶ms, 0, sizeof(params)); + + ipu_ch_param_set_field(¶ms, 0, 125, 13, width - 1); + + if ((ch == 8) || (ch == 9) || (ch == 10)) { + ipu_ch_param_set_field(¶ms, 0, 138, 12, (height / 2) - 1); + ipu_ch_param_set_field(¶ms, 1, 102, 14, (stride * 2) - 1); + } else { + ipu_ch_param_set_field(¶ms, 0, 138, 12, height - 1); + ipu_ch_param_set_field(¶ms, 1, 102, 14, stride - 1); + } + + ipu_ch_param_set_field(¶ms, 1, 0, 29, addr0 >> 3); + ipu_ch_param_set_field(¶ms, 1, 29, 29, addr1 >> 3); + + switch (pixel_fmt) { + case IPU_PIX_FMT_GENERIC: + /*Represents 8-bit Generic data */ + ipu_ch_param_set_field(¶ms, 0, 107, 3, 5); /* bits/pixel */ + ipu_ch_param_set_field(¶ms, 1, 85, 4, 6); /* pix format */ + ipu_ch_param_set_field(¶ms, 1, 78, 7, 63); /* burst size */ + + break; + case IPU_PIX_FMT_GENERIC_32: + /*Represents 32-bit Generic data */ + break; + case IPU_PIX_FMT_RGB565: + ipu_ch_param_set_field(¶ms, 0, 107, 3, 3); /* bits/pixel */ + ipu_ch_param_set_field(¶ms, 1, 85, 4, 7); /* pix format */ + ipu_ch_param_set_field(¶ms, 1, 78, 7, 15); /* burst size */ + + ipu_ch_params_set_packing(¶ms, 5, 0, 6, 5, 5, 11, 8, 16); + break; + case IPU_PIX_FMT_BGR24: + ipu_ch_param_set_field(¶ms, 0, 107, 3, 1); /* bits/pixel */ + ipu_ch_param_set_field(¶ms, 1, 85, 4, 7); /* pix format */ + ipu_ch_param_set_field(¶ms, 1, 78, 7, 19); /* burst size */ + + ipu_ch_params_set_packing(¶ms, 8, 0, 8, 8, 8, 16, 8, 24); + break; + case IPU_PIX_FMT_RGB24: + case IPU_PIX_FMT_YUV444: + ipu_ch_param_set_field(¶ms, 0, 107, 3, 1); /* bits/pixel */ + ipu_ch_param_set_field(¶ms, 1, 85, 4, 7); /* pix format */ + ipu_ch_param_set_field(¶ms, 1, 78, 7, 19); /* burst size */ + + ipu_ch_params_set_packing(¶ms, 8, 16, 8, 8, 8, 0, 8, 24); + break; + case IPU_PIX_FMT_BGRA32: + case IPU_PIX_FMT_BGR32: + ipu_ch_param_set_field(¶ms, 0, 107, 3, 0); /* bits/pixel */ + ipu_ch_param_set_field(¶ms, 1, 85, 4, 7); /* pix format */ + ipu_ch_param_set_field(¶ms, 1, 78, 7, 15); /* burst size */ + + ipu_ch_params_set_packing(¶ms, 8, 8, 8, 16, 8, 24, 8, 0); + break; + case IPU_PIX_FMT_RGBA32: + case IPU_PIX_FMT_RGB32: + ipu_ch_param_set_field(¶ms, 0, 107, 3, 0); /* bits/pixel */ + ipu_ch_param_set_field(¶ms, 1, 85, 4, 7); /* pix format */ + ipu_ch_param_set_field(¶ms, 1, 78, 7, 15); /* burst size */ + + ipu_ch_params_set_packing(¶ms, 8, 24, 8, 16, 8, 8, 8, 0); + break; + case IPU_PIX_FMT_ABGR32: + ipu_ch_param_set_field(¶ms, 0, 107, 3, 0); /* bits/pixel */ + ipu_ch_param_set_field(¶ms, 1, 85, 4, 7); /* pix format */ + + ipu_ch_params_set_packing(¶ms, 8, 0, 8, 8, 8, 16, 8, 24); + break; + case IPU_PIX_FMT_UYVY: + ipu_ch_param_set_field(¶ms, 0, 107, 3, 3); /* bits/pixel */ + ipu_ch_param_set_field(¶ms, 1, 85, 4, 0xA); /* pix format */ + ipu_ch_param_set_field(¶ms, 1, 78, 7, 15); /* burst size */ + break; + case IPU_PIX_FMT_YUYV: + ipu_ch_param_set_field(¶ms, 0, 107, 3, 3); /* bits/pixel */ + ipu_ch_param_set_field(¶ms, 1, 85, 4, 0x8); /* pix format */ + ipu_ch_param_set_field(¶ms, 1, 78, 7, 31); /* burst size */ + break; + case IPU_PIX_FMT_YUV420P2: + case IPU_PIX_FMT_YUV420P: + ipu_ch_param_set_field(¶ms, 1, 85, 4, 2); /* pix format */ + + if (uv_stride < stride / 2) + uv_stride = stride / 2; + + u_offset = stride * height; + v_offset = u_offset + (uv_stride * height / 2); + /* burst size */ + if ((ch == 8) || (ch == 9) || (ch == 10)) { + ipu_ch_param_set_field(¶ms, 1, 78, 7, 15); + uv_stride = uv_stride*2; + } else { + ipu_ch_param_set_field(¶ms, 1, 78, 7, 31); + } + break; + case IPU_PIX_FMT_YVU422P: + /* BPP & pixel format */ + ipu_ch_param_set_field(¶ms, 1, 85, 4, 1); /* pix format */ + ipu_ch_param_set_field(¶ms, 1, 78, 7, 31); /* burst size */ + + if (uv_stride < stride / 2) + uv_stride = stride / 2; + + v_offset = (v == 0) ? stride * height : v; + u_offset = (u == 0) ? v_offset + v_offset / 2 : u; + break; + case IPU_PIX_FMT_YUV422P: + /* BPP & pixel format */ + ipu_ch_param_set_field(¶ms, 1, 85, 4, 1); /* pix format */ + ipu_ch_param_set_field(¶ms, 1, 78, 7, 31); /* burst size */ + + if (uv_stride < stride / 2) + uv_stride = stride / 2; + + u_offset = (u == 0) ? stride * height : u; + v_offset = (v == 0) ? u_offset + u_offset / 2 : v; + break; + case IPU_PIX_FMT_NV12: + /* BPP & pixel format */ + ipu_ch_param_set_field(¶ms, 1, 85, 4, 4); /* pix format */ + ipu_ch_param_set_field(¶ms, 1, 78, 7, 31); /* burst size */ + uv_stride = stride; + u_offset = (u == 0) ? stride * height : u; + break; + default: + puts("mxc ipu: unimplemented pixel format\n"); + break; + } + + + if (uv_stride) + ipu_ch_param_set_field(¶ms, 1, 128, 14, uv_stride - 1); + + /* Get the uv offset from user when need cropping */ + if (u || v) { + u_offset = u; + v_offset = v; + } + + /* UBO and VBO are 22-bit */ + if (u_offset/8 > 0x3fffff) + puts("The value of U offset exceeds IPU limitation\n"); + if (v_offset/8 > 0x3fffff) + puts("The value of V offset exceeds IPU limitation\n"); + + ipu_ch_param_set_field(¶ms, 0, 46, 22, u_offset / 8); + ipu_ch_param_set_field(¶ms, 0, 68, 22, v_offset / 8); + + debug("initializing idma ch %d @ %p\n", ch, ipu_ch_param_addr(ch)); + memcpy(ipu_ch_param_addr(ch), ¶ms, sizeof(params)); +}; + +/* + * This function is called to initialize a buffer for logical IPU channel. + * + * @param channel Input parameter for the logical channel ID. + * + * @param type Input parameter which buffer to initialize. + * + * @param pixel_fmt Input parameter for pixel format of buffer. + * Pixel format is a FOURCC ASCII code. + * + * @param width Input parameter for width of buffer in pixels. + * + * @param height Input parameter for height of buffer in pixels. + * + * @param stride Input parameter for stride length of buffer + * in pixels. + * + * @param phyaddr_0 Input parameter buffer 0 physical address. + * + * @param phyaddr_1 Input parameter buffer 1 physical address. + * Setting this to a value other than NULL enables + * double buffering mode. + * + * @param u private u offset for additional cropping, + * zero if not used. + * + * @param v private v offset for additional cropping, + * zero if not used. + * + * @return Returns 0 on success or negative error code on fail + */ +int32_t ipu_init_channel_buffer(ipu_channel_t channel, ipu_buffer_t type, + uint32_t pixel_fmt, + uint16_t width, uint16_t height, + uint32_t stride, + dma_addr_t phyaddr_0, dma_addr_t phyaddr_1, + uint32_t u, uint32_t v) +{ + uint32_t reg; + uint32_t dma_chan; + + dma_chan = channel_2_dma(channel, type); + if (!idma_is_valid(dma_chan)) + return -EINVAL; + + if (stride < width * bytes_per_pixel(pixel_fmt)) + stride = width * bytes_per_pixel(pixel_fmt); + + if (stride % 4) { + printf( + "Stride not 32-bit aligned, stride = %d\n", stride); + return -EINVAL; + } + /* Build parameter memory data for DMA channel */ + ipu_ch_param_init(dma_chan, pixel_fmt, width, height, stride, u, v, 0, + phyaddr_0, phyaddr_1); + + if (ipu_is_dmfc_chan(dma_chan)) { + ipu_dmfc_set_wait4eot(dma_chan, width); + } + + if (idma_is_set(IDMAC_CHA_PRI, dma_chan)) + ipu_ch_param_set_high_priority(dma_chan); + + ipu_ch_param_dump(dma_chan); + + reg = __raw_readl(IPU_CHA_DB_MODE_SEL(dma_chan)); + if (phyaddr_1) + reg |= idma_mask(dma_chan); + else + reg &= ~idma_mask(dma_chan); + __raw_writel(reg, IPU_CHA_DB_MODE_SEL(dma_chan)); + + /* Reset to buffer 0 */ + __raw_writel(idma_mask(dma_chan), IPU_CHA_CUR_BUF(dma_chan)); + + return 0; +} + +/* + * This function enables a logical channel. + * + * @param channel Input parameter for the logical channel ID. + * + * @return This function returns 0 on success or negative error code on + * fail. + */ +int32_t ipu_enable_channel(ipu_channel_t channel) +{ + uint32_t reg; + uint32_t in_dma; + uint32_t out_dma; + + if (g_channel_enable_mask & (1L << IPU_CHAN_ID(channel))) { + printf("Warning: channel already enabled %d\n", + IPU_CHAN_ID(channel)); + } + + /* Get input and output dma channels */ + out_dma = channel_2_dma(channel, IPU_OUTPUT_BUFFER); + in_dma = channel_2_dma(channel, IPU_VIDEO_IN_BUFFER); + + if (idma_is_valid(in_dma)) { + reg = __raw_readl(IDMAC_CHA_EN(in_dma)); + __raw_writel(reg | idma_mask(in_dma), IDMAC_CHA_EN(in_dma)); + } + if (idma_is_valid(out_dma)) { + reg = __raw_readl(IDMAC_CHA_EN(out_dma)); + __raw_writel(reg | idma_mask(out_dma), IDMAC_CHA_EN(out_dma)); + } + + if ((channel == MEM_DC_SYNC) || (channel == MEM_BG_SYNC) || + (channel == MEM_FG_SYNC)) + ipu_dp_dc_enable(channel); + + g_channel_enable_mask |= 1L << IPU_CHAN_ID(channel); + + return 0; +} + +/* + * This function clear buffer ready for a logical channel. + * + * @param channel Input parameter for the logical channel ID. + * + * @param type Input parameter which buffer to clear. + * + * @param bufNum Input parameter for which buffer number clear + * ready state. + * + */ +void ipu_clear_buffer_ready(ipu_channel_t channel, ipu_buffer_t type, + uint32_t bufNum) +{ + uint32_t dma_ch = channel_2_dma(channel, type); + + if (!idma_is_valid(dma_ch)) + return; + + __raw_writel(0xF0000000, IPU_GPR); /* write one to clear */ + if (bufNum == 0) { + if (idma_is_set(IPU_CHA_BUF0_RDY, dma_ch)) { + __raw_writel(idma_mask(dma_ch), + IPU_CHA_BUF0_RDY(dma_ch)); + } + } else { + if (idma_is_set(IPU_CHA_BUF1_RDY, dma_ch)) { + __raw_writel(idma_mask(dma_ch), + IPU_CHA_BUF1_RDY(dma_ch)); + } + } + __raw_writel(0x0, IPU_GPR); /* write one to set */ +} + +/* + * This function disables a logical channel. + * + * @param channel Input parameter for the logical channel ID. + * + * @param wait_for_stop Flag to set whether to wait for channel end + * of frame or return immediately. + * + * @return This function returns 0 on success or negative error code on + * fail. + */ +int32_t ipu_disable_channel(ipu_channel_t channel) +{ + uint32_t reg; + uint32_t in_dma; + uint32_t out_dma; + + if ((g_channel_enable_mask & (1L << IPU_CHAN_ID(channel))) == 0) { + debug("Channel already disabled %d\n", + IPU_CHAN_ID(channel)); + return 0; + } + + /* Get input and output dma channels */ + out_dma = channel_2_dma(channel, IPU_OUTPUT_BUFFER); + in_dma = channel_2_dma(channel, IPU_VIDEO_IN_BUFFER); + + if ((idma_is_valid(in_dma) && + !idma_is_set(IDMAC_CHA_EN, in_dma)) + && (idma_is_valid(out_dma) && + !idma_is_set(IDMAC_CHA_EN, out_dma))) + return -EINVAL; + + if ((channel == MEM_BG_SYNC) || (channel == MEM_FG_SYNC) || + (channel == MEM_DC_SYNC)) { + ipu_dp_dc_disable(channel, 0); + } + + /* Disable DMA channel(s) */ + if (idma_is_valid(in_dma)) { + reg = __raw_readl(IDMAC_CHA_EN(in_dma)); + __raw_writel(reg & ~idma_mask(in_dma), IDMAC_CHA_EN(in_dma)); + __raw_writel(idma_mask(in_dma), IPU_CHA_CUR_BUF(in_dma)); + } + if (idma_is_valid(out_dma)) { + reg = __raw_readl(IDMAC_CHA_EN(out_dma)); + __raw_writel(reg & ~idma_mask(out_dma), IDMAC_CHA_EN(out_dma)); + __raw_writel(idma_mask(out_dma), IPU_CHA_CUR_BUF(out_dma)); + } + + g_channel_enable_mask &= ~(1L << IPU_CHAN_ID(channel)); + + /* Set channel buffers NOT to be ready */ + if (idma_is_valid(in_dma)) { + ipu_clear_buffer_ready(channel, IPU_VIDEO_IN_BUFFER, 0); + ipu_clear_buffer_ready(channel, IPU_VIDEO_IN_BUFFER, 1); + } + if (idma_is_valid(out_dma)) { + ipu_clear_buffer_ready(channel, IPU_OUTPUT_BUFFER, 0); + ipu_clear_buffer_ready(channel, IPU_OUTPUT_BUFFER, 1); + } + + return 0; +} + +uint32_t bytes_per_pixel(uint32_t fmt) +{ + switch (fmt) { + case IPU_PIX_FMT_GENERIC: /*generic data */ + case IPU_PIX_FMT_RGB332: + case IPU_PIX_FMT_YUV420P: + case IPU_PIX_FMT_YUV422P: + return 1; + break; + case IPU_PIX_FMT_RGB565: + case IPU_PIX_FMT_YUYV: + case IPU_PIX_FMT_UYVY: + return 2; + break; + case IPU_PIX_FMT_BGR24: + case IPU_PIX_FMT_RGB24: + return 3; + break; + case IPU_PIX_FMT_GENERIC_32: /*generic data */ + case IPU_PIX_FMT_BGR32: + case IPU_PIX_FMT_BGRA32: + case IPU_PIX_FMT_RGB32: + case IPU_PIX_FMT_RGBA32: + case IPU_PIX_FMT_ABGR32: + return 4; + break; + default: + return 1; + break; + } + return 0; +} + +ipu_color_space_t format_to_colorspace(uint32_t fmt) +{ + switch (fmt) { + case IPU_PIX_FMT_RGB666: + case IPU_PIX_FMT_RGB565: + case IPU_PIX_FMT_BGR24: + case IPU_PIX_FMT_RGB24: + case IPU_PIX_FMT_BGR32: + case IPU_PIX_FMT_BGRA32: + case IPU_PIX_FMT_RGB32: + case IPU_PIX_FMT_RGBA32: + case IPU_PIX_FMT_ABGR32: + case IPU_PIX_FMT_LVDS666: + case IPU_PIX_FMT_LVDS888: + return RGB; + break; + + default: + return YCbCr; + break; + } + return RGB; +} diff --git a/drivers/video/ipu_disp.c b/drivers/video/ipu_disp.c new file mode 100644 index 0000000000..11cf98d3d5 --- /dev/null +++ b/drivers/video/ipu_disp.c @@ -0,0 +1,1359 @@ +/* + * Porting to u-boot: + * + * (C) Copyright 2010 + * Stefano Babic, DENX Software Engineering, sbabic@denx.de + * + * Linux IPU driver for MX51: + * + * (C) Copyright 2005-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* #define DEBUG */ + +#include <common.h> +#include <linux/types.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/sys_proto.h> +#include "ipu.h" +#include "ipu_regs.h" + +enum csc_type_t { + RGB2YUV = 0, + YUV2RGB, + RGB2RGB, + YUV2YUV, + CSC_NONE, + CSC_NUM +}; + +struct dp_csc_param_t { + int mode; + void *coeff; +}; + +#define SYNC_WAVE 0 + +/* DC display ID assignments */ +#define DC_DISP_ID_SYNC(di) (di) +#define DC_DISP_ID_SERIAL 2 +#define DC_DISP_ID_ASYNC 3 + +int dmfc_type_setup; +static int dmfc_size_28, dmfc_size_29, dmfc_size_24, dmfc_size_27, dmfc_size_23; +int g_di1_tvout; + +extern struct clk *g_ipu_clk; +extern struct clk *g_di_clk[2]; +extern struct clk *g_pixel_clk[2]; + +extern unsigned char g_ipu_clk_enabled; +extern unsigned char g_dc_di_assignment[]; + +void ipu_dmfc_init(int dmfc_type, int first) +{ + u32 dmfc_wr_chan, dmfc_dp_chan; + + if (first) { + if (dmfc_type_setup > dmfc_type) + dmfc_type = dmfc_type_setup; + else + dmfc_type_setup = dmfc_type; + + /* disable DMFC-IC channel*/ + __raw_writel(0x2, DMFC_IC_CTRL); + } else if (dmfc_type_setup >= DMFC_HIGH_RESOLUTION_DC) { + printf("DMFC high resolution has set, will not change\n"); + return; + } else + dmfc_type_setup = dmfc_type; + + if (dmfc_type == DMFC_HIGH_RESOLUTION_DC) { + /* 1 - segment 0~3; + * 5B - segement 4, 5; + * 5F - segement 6, 7; + * 1C, 2C and 6B, 6F unused; + */ + debug("IPU DMFC DC HIGH RES: 1(0~3), 5B(4,5), 5F(6,7)\n"); + dmfc_wr_chan = 0x00000088; + dmfc_dp_chan = 0x00009694; + dmfc_size_28 = 256 * 4; + dmfc_size_29 = 0; + dmfc_size_24 = 0; + dmfc_size_27 = 128 * 4; + dmfc_size_23 = 128 * 4; + } else if (dmfc_type == DMFC_HIGH_RESOLUTION_DP) { + /* 1 - segment 0, 1; + * 5B - segement 2~5; + * 5F - segement 6,7; + * 1C, 2C and 6B, 6F unused; + */ + debug("IPU DMFC DP HIGH RES: 1(0,1), 5B(2~5), 5F(6,7)\n"); + dmfc_wr_chan = 0x00000090; + dmfc_dp_chan = 0x0000968a; + dmfc_size_28 = 128 * 4; + dmfc_size_29 = 0; + dmfc_size_24 = 0; + dmfc_size_27 = 128 * 4; + dmfc_size_23 = 256 * 4; + } else if (dmfc_type == DMFC_HIGH_RESOLUTION_ONLY_DP) { + /* 5B - segement 0~3; + * 5F - segement 4~7; + * 1, 1C, 2C and 6B, 6F unused; + */ + debug("IPU DMFC ONLY-DP HIGH RES: 5B(0~3), 5F(4~7)\n"); + dmfc_wr_chan = 0x00000000; + dmfc_dp_chan = 0x00008c88; + dmfc_size_28 = 0; + dmfc_size_29 = 0; + dmfc_size_24 = 0; + dmfc_size_27 = 256 * 4; + dmfc_size_23 = 256 * 4; + } else { + /* 1 - segment 0, 1; + * 5B - segement 4, 5; + * 5F - segement 6, 7; + * 1C, 2C and 6B, 6F unused; + */ + debug("IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)\n"); + dmfc_wr_chan = 0x00000090; + dmfc_dp_chan = 0x00009694; + dmfc_size_28 = 128 * 4; + dmfc_size_29 = 0; + dmfc_size_24 = 0; + dmfc_size_27 = 128 * 4; + dmfc_size_23 = 128 * 4; + } + __raw_writel(dmfc_wr_chan, DMFC_WR_CHAN); + __raw_writel(0x202020F6, DMFC_WR_CHAN_DEF); + __raw_writel(dmfc_dp_chan, DMFC_DP_CHAN); + /* Enable chan 5 watermark set at 5 bursts and clear at 7 bursts */ + __raw_writel(0x2020F6F6, DMFC_DP_CHAN_DEF); +} + +void ipu_dmfc_set_wait4eot(int dma_chan, int width) +{ + u32 dmfc_gen1 = __raw_readl(DMFC_GENERAL1); + + if (width >= HIGH_RESOLUTION_WIDTH) { + if (dma_chan == 23) + ipu_dmfc_init(DMFC_HIGH_RESOLUTION_DP, 0); + else if (dma_chan == 28) + ipu_dmfc_init(DMFC_HIGH_RESOLUTION_DC, 0); + } + + if (dma_chan == 23) { /*5B*/ + if (dmfc_size_23 / width > 3) + dmfc_gen1 |= 1UL << 20; + else + dmfc_gen1 &= ~(1UL << 20); + } else if (dma_chan == 24) { /*6B*/ + if (dmfc_size_24 / width > 1) + dmfc_gen1 |= 1UL << 22; + else + dmfc_gen1 &= ~(1UL << 22); + } else if (dma_chan == 27) { /*5F*/ + if (dmfc_size_27 / width > 2) + dmfc_gen1 |= 1UL << 21; + else + dmfc_gen1 &= ~(1UL << 21); + } else if (dma_chan == 28) { /*1*/ + if (dmfc_size_28 / width > 2) + dmfc_gen1 |= 1UL << 16; + else + dmfc_gen1 &= ~(1UL << 16); + } else if (dma_chan == 29) { /*6F*/ + if (dmfc_size_29 / width > 1) + dmfc_gen1 |= 1UL << 23; + else + dmfc_gen1 &= ~(1UL << 23); + } + + __raw_writel(dmfc_gen1, DMFC_GENERAL1); +} + +static void ipu_di_data_wave_config(int di, + int wave_gen, + int access_size, int component_size) +{ + u32 reg; + reg = (access_size << DI_DW_GEN_ACCESS_SIZE_OFFSET) | + (component_size << DI_DW_GEN_COMPONENT_SIZE_OFFSET); + __raw_writel(reg, DI_DW_GEN(di, wave_gen)); +} + +static void ipu_di_data_pin_config(int di, int wave_gen, int di_pin, int set, + int up, int down) +{ + u32 reg; + + reg = __raw_readl(DI_DW_GEN(di, wave_gen)); + reg &= ~(0x3 << (di_pin * 2)); + reg |= set << (di_pin * 2); + __raw_writel(reg, DI_DW_GEN(di, wave_gen)); + + __raw_writel((down << 16) | up, DI_DW_SET(di, wave_gen, set)); +} + +static void ipu_di_sync_config(int di, int wave_gen, + int run_count, int run_src, + int offset_count, int offset_src, + int repeat_count, int cnt_clr_src, + int cnt_polarity_gen_en, + int cnt_polarity_clr_src, + int cnt_polarity_trigger_src, + int cnt_up, int cnt_down) +{ + u32 reg; + + if ((run_count >= 0x1000) || (offset_count >= 0x1000) || + (repeat_count >= 0x1000) || + (cnt_up >= 0x400) || (cnt_down >= 0x400)) { + printf("DI%d counters out of range.\n", di); + return; + } + + reg = (run_count << 19) | (++run_src << 16) | + (offset_count << 3) | ++offset_src; + __raw_writel(reg, DI_SW_GEN0(di, wave_gen)); + reg = (cnt_polarity_gen_en << 29) | (++cnt_clr_src << 25) | + (++cnt_polarity_trigger_src << 12) | (++cnt_polarity_clr_src << 9); + reg |= (cnt_down << 16) | cnt_up; + if (repeat_count == 0) { + /* Enable auto reload */ + reg |= 0x10000000; + } + __raw_writel(reg, DI_SW_GEN1(di, wave_gen)); + reg = __raw_readl(DI_STP_REP(di, wave_gen)); + reg &= ~(0xFFFF << (16 * ((wave_gen - 1) & 0x1))); + reg |= repeat_count << (16 * ((wave_gen - 1) & 0x1)); + __raw_writel(reg, DI_STP_REP(di, wave_gen)); +} + +static void ipu_dc_map_config(int map, int byte_num, int offset, int mask) +{ + int ptr = map * 3 + byte_num; + u32 reg; + + reg = __raw_readl(DC_MAP_CONF_VAL(ptr)); + reg &= ~(0xFFFF << (16 * (ptr & 0x1))); + reg |= ((offset << 8) | mask) << (16 * (ptr & 0x1)); + __raw_writel(reg, DC_MAP_CONF_VAL(ptr)); + + reg = __raw_readl(DC_MAP_CONF_PTR(map)); + reg &= ~(0x1F << ((16 * (map & 0x1)) + (5 * byte_num))); + reg |= ptr << ((16 * (map & 0x1)) + (5 * byte_num)); + __raw_writel(reg, DC_MAP_CONF_PTR(map)); +} + +static void ipu_dc_map_clear(int map) +{ + u32 reg = __raw_readl(DC_MAP_CONF_PTR(map)); + __raw_writel(reg & ~(0xFFFF << (16 * (map & 0x1))), + DC_MAP_CONF_PTR(map)); +} + +static void ipu_dc_write_tmpl(int word, u32 opcode, u32 operand, int map, + int wave, int glue, int sync) +{ + u32 reg; + int stop = 1; + + reg = sync; + reg |= (glue << 4); + reg |= (++wave << 11); + reg |= (++map << 15); + reg |= (operand << 20) & 0xFFF00000; + __raw_writel(reg, ipu_dc_tmpl_reg + word * 2); + + reg = (operand >> 12); + reg |= opcode << 4; + reg |= (stop << 9); + __raw_writel(reg, ipu_dc_tmpl_reg + word * 2 + 1); +} + +static void ipu_dc_link_event(int chan, int event, int addr, int priority) +{ + u32 reg; + + reg = __raw_readl(DC_RL_CH(chan, event)); + reg &= ~(0xFFFF << (16 * (event & 0x1))); + reg |= ((addr << 8) | priority) << (16 * (event & 0x1)); + __raw_writel(reg, DC_RL_CH(chan, event)); +} + +/* Y = R * 1.200 + G * 2.343 + B * .453 + 0.250; + * U = R * -.672 + G * -1.328 + B * 2.000 + 512.250.; + * V = R * 2.000 + G * -1.672 + B * -.328 + 512.250.; + */ +static const int rgb2ycbcr_coeff[5][3] = { + {0x4D, 0x96, 0x1D}, + {0x3D5, 0x3AB, 0x80}, + {0x80, 0x395, 0x3EB}, + {0x0000, 0x0200, 0x0200}, /* B0, B1, B2 */ + {0x2, 0x2, 0x2}, /* S0, S1, S2 */ +}; + +/* R = (1.164 * (Y - 16)) + (1.596 * (Cr - 128)); + * G = (1.164 * (Y - 16)) - (0.392 * (Cb - 128)) - (0.813 * (Cr - 128)); + * B = (1.164 * (Y - 16)) + (2.017 * (Cb - 128); + */ +static const int ycbcr2rgb_coeff[5][3] = { + {0x095, 0x000, 0x0CC}, + {0x095, 0x3CE, 0x398}, + {0x095, 0x0FF, 0x000}, + {0x3E42, 0x010A, 0x3DD6}, /*B0,B1,B2 */ + {0x1, 0x1, 0x1}, /*S0,S1,S2 */ +}; + +#define mask_a(a) ((u32)(a) & 0x3FF) +#define mask_b(b) ((u32)(b) & 0x3FFF) + +/* Pls keep S0, S1 and S2 as 0x2 by using this convertion */ +static int rgb_to_yuv(int n, int red, int green, int blue) +{ + int c; + c = red * rgb2ycbcr_coeff[n][0]; + c += green * rgb2ycbcr_coeff[n][1]; + c += blue * rgb2ycbcr_coeff[n][2]; + c /= 16; + c += rgb2ycbcr_coeff[3][n] * 4; + c += 8; + c /= 16; + if (c < 0) + c = 0; + if (c > 255) + c = 255; + return c; +} + +/* + * Row is for BG: RGB2YUV YUV2RGB RGB2RGB YUV2YUV CSC_NONE + * Column is for FG: RGB2YUV YUV2RGB RGB2RGB YUV2YUV CSC_NONE + */ +static struct dp_csc_param_t dp_csc_array[CSC_NUM][CSC_NUM] = { + { + {DP_COM_CONF_CSC_DEF_BOTH, &rgb2ycbcr_coeff}, + {0, 0}, + {0, 0}, + {DP_COM_CONF_CSC_DEF_BG, &rgb2ycbcr_coeff}, + {DP_COM_CONF_CSC_DEF_BG, &rgb2ycbcr_coeff} + }, + { + {0, 0}, + {DP_COM_CONF_CSC_DEF_BOTH, &ycbcr2rgb_coeff}, + {DP_COM_CONF_CSC_DEF_BG, &ycbcr2rgb_coeff}, + {0, 0}, + {DP_COM_CONF_CSC_DEF_BG, &ycbcr2rgb_coeff} + }, + { + {0, 0}, + {DP_COM_CONF_CSC_DEF_FG, &ycbcr2rgb_coeff}, + {0, 0}, + {0, 0}, + {0, 0} + }, + { + {DP_COM_CONF_CSC_DEF_FG, &rgb2ycbcr_coeff}, + {0, 0}, + {0, 0}, + {0, 0}, + {0, 0} + }, + { + {DP_COM_CONF_CSC_DEF_FG, &rgb2ycbcr_coeff}, + {DP_COM_CONF_CSC_DEF_FG, &ycbcr2rgb_coeff}, + {0, 0}, + {0, 0}, + {0, 0} + } +}; + +static enum csc_type_t fg_csc_type = CSC_NONE, bg_csc_type = CSC_NONE; +static int color_key_4rgb = 1; + +void ipu_dp_csc_setup(int dp, struct dp_csc_param_t dp_csc_param, + unsigned char srm_mode_update) +{ + u32 reg; + const int (*coeff)[5][3]; + + if (dp_csc_param.mode >= 0) { + reg = __raw_readl(DP_COM_CONF(dp)); + reg &= ~DP_COM_CONF_CSC_DEF_MASK; + reg |= dp_csc_param.mode; + __raw_writel(reg, DP_COM_CONF(dp)); + } + + coeff = dp_csc_param.coeff; + + if (coeff) { + __raw_writel(mask_a((*coeff)[0][0]) | + (mask_a((*coeff)[0][1]) << 16), DP_CSC_A_0(dp)); + __raw_writel(mask_a((*coeff)[0][2]) | + (mask_a((*coeff)[1][0]) << 16), DP_CSC_A_1(dp)); + __raw_writel(mask_a((*coeff)[1][1]) | + (mask_a((*coeff)[1][2]) << 16), DP_CSC_A_2(dp)); + __raw_writel(mask_a((*coeff)[2][0]) | + (mask_a((*coeff)[2][1]) << 16), DP_CSC_A_3(dp)); + __raw_writel(mask_a((*coeff)[2][2]) | + (mask_b((*coeff)[3][0]) << 16) | + ((*coeff)[4][0] << 30), DP_CSC_0(dp)); + __raw_writel(mask_b((*coeff)[3][1]) | ((*coeff)[4][1] << 14) | + (mask_b((*coeff)[3][2]) << 16) | + ((*coeff)[4][2] << 30), DP_CSC_1(dp)); + } + + if (srm_mode_update) { + reg = __raw_readl(IPU_SRM_PRI2) | 0x8; + __raw_writel(reg, IPU_SRM_PRI2); + } +} + +int ipu_dp_init(ipu_channel_t channel, uint32_t in_pixel_fmt, + uint32_t out_pixel_fmt) +{ + int in_fmt, out_fmt; + int dp; + int partial = 0; + uint32_t reg; + + if (channel == MEM_FG_SYNC) { + dp = DP_SYNC; + partial = 1; + } else if (channel == MEM_BG_SYNC) { + dp = DP_SYNC; + partial = 0; + } else if (channel == MEM_BG_ASYNC0) { + dp = DP_ASYNC0; + partial = 0; + } else { + return -EINVAL; + } + + in_fmt = format_to_colorspace(in_pixel_fmt); + out_fmt = format_to_colorspace(out_pixel_fmt); + + if (partial) { + if (in_fmt == RGB) { + if (out_fmt == RGB) + fg_csc_type = RGB2RGB; + else + fg_csc_type = RGB2YUV; + } else { + if (out_fmt == RGB) + fg_csc_type = YUV2RGB; + else + fg_csc_type = YUV2YUV; + } + } else { + if (in_fmt == RGB) { + if (out_fmt == RGB) + bg_csc_type = RGB2RGB; + else + bg_csc_type = RGB2YUV; + } else { + if (out_fmt == RGB) + bg_csc_type = YUV2RGB; + else + bg_csc_type = YUV2YUV; + } + } + + /* Transform color key from rgb to yuv if CSC is enabled */ + reg = __raw_readl(DP_COM_CONF(dp)); + if (color_key_4rgb && (reg & DP_COM_CONF_GWCKE) && + (((fg_csc_type == RGB2YUV) && (bg_csc_type == YUV2YUV)) || + ((fg_csc_type == YUV2YUV) && (bg_csc_type == RGB2YUV)) || + ((fg_csc_type == YUV2YUV) && (bg_csc_type == YUV2YUV)) || + ((fg_csc_type == YUV2RGB) && (bg_csc_type == YUV2RGB)))) { + int red, green, blue; + int y, u, v; + uint32_t color_key = __raw_readl(DP_GRAPH_WIND_CTRL(dp)) & + 0xFFFFFFL; + + debug("_ipu_dp_init color key 0x%x need change to yuv fmt!\n", + color_key); + + red = (color_key >> 16) & 0xFF; + green = (color_key >> 8) & 0xFF; + blue = color_key & 0xFF; + + y = rgb_to_yuv(0, red, green, blue); + u = rgb_to_yuv(1, red, green, blue); + v = rgb_to_yuv(2, red, green, blue); + color_key = (y << 16) | (u << 8) | v; + + reg = __raw_readl(DP_GRAPH_WIND_CTRL(dp)) & 0xFF000000L; + __raw_writel(reg | color_key, DP_GRAPH_WIND_CTRL(dp)); + color_key_4rgb = 0; + + debug("_ipu_dp_init color key change to yuv fmt 0x%x!\n", + color_key); + } + + ipu_dp_csc_setup(dp, dp_csc_array[bg_csc_type][fg_csc_type], 1); + + return 0; +} + +void ipu_dp_uninit(ipu_channel_t channel) +{ + int dp; + int partial = 0; + + if (channel == MEM_FG_SYNC) { + dp = DP_SYNC; + partial = 1; + } else if (channel == MEM_BG_SYNC) { + dp = DP_SYNC; + partial = 0; + } else if (channel == MEM_BG_ASYNC0) { + dp = DP_ASYNC0; + partial = 0; + } else { + return; + } + + if (partial) + fg_csc_type = CSC_NONE; + else + bg_csc_type = CSC_NONE; + + ipu_dp_csc_setup(dp, dp_csc_array[bg_csc_type][fg_csc_type], 0); +} + +void ipu_dc_init(int dc_chan, int di, unsigned char interlaced) +{ + u32 reg = 0; + + if ((dc_chan == 1) || (dc_chan == 5)) { + if (interlaced) { + ipu_dc_link_event(dc_chan, DC_EVT_NL, 0, 3); + ipu_dc_link_event(dc_chan, DC_EVT_EOL, 0, 2); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA, 0, 1); + } else { + if (di) { + ipu_dc_link_event(dc_chan, DC_EVT_NL, 2, 3); + ipu_dc_link_event(dc_chan, DC_EVT_EOL, 3, 2); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA, + 4, 1); + } else { + ipu_dc_link_event(dc_chan, DC_EVT_NL, 5, 3); + ipu_dc_link_event(dc_chan, DC_EVT_EOL, 6, 2); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA, + 7, 1); + } + } + ipu_dc_link_event(dc_chan, DC_EVT_NF, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NFIELD, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_EOF, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_EOFIELD, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_CHAN, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_ADDR, 0, 0); + + reg = 0x2; + reg |= DC_DISP_ID_SYNC(di) << DC_WR_CH_CONF_PROG_DISP_ID_OFFSET; + reg |= di << 2; + if (interlaced) + reg |= DC_WR_CH_CONF_FIELD_MODE; + } else if ((dc_chan == 8) || (dc_chan == 9)) { + /* async channels */ + ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA_W_0, 0x64, 1); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA_W_1, 0x64, 1); + + reg = 0x3; + reg |= DC_DISP_ID_SERIAL << DC_WR_CH_CONF_PROG_DISP_ID_OFFSET; + } + __raw_writel(reg, DC_WR_CH_CONF(dc_chan)); + + __raw_writel(0x00000000, DC_WR_CH_ADDR(dc_chan)); + + __raw_writel(0x00000084, DC_GEN); +} + +void ipu_dc_uninit(int dc_chan) +{ + if ((dc_chan == 1) || (dc_chan == 5)) { + ipu_dc_link_event(dc_chan, DC_EVT_NL, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_EOL, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NF, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NFIELD, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_EOF, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_EOFIELD, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_CHAN, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_ADDR, 0, 0); + } else if ((dc_chan == 8) || (dc_chan == 9)) { + ipu_dc_link_event(dc_chan, DC_EVT_NEW_ADDR_W_0, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_ADDR_W_1, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_CHAN_W_0, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_CHAN_W_1, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA_W_0, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA_W_1, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_ADDR_R_0, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_ADDR_R_1, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_CHAN_R_0, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_CHAN_R_1, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA_R_0, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA_R_1, 0, 0); + } +} + +int ipu_chan_is_interlaced(ipu_channel_t channel) +{ + if (channel == MEM_DC_SYNC) + return !!(__raw_readl(DC_WR_CH_CONF_1) & + DC_WR_CH_CONF_FIELD_MODE); + else if ((channel == MEM_BG_SYNC) || (channel == MEM_FG_SYNC)) + return !!(__raw_readl(DC_WR_CH_CONF_5) & + DC_WR_CH_CONF_FIELD_MODE); + return 0; +} + +void ipu_dp_dc_enable(ipu_channel_t channel) +{ + int di; + uint32_t reg; + uint32_t dc_chan; + + if (channel == MEM_FG_SYNC) + dc_chan = 5; + if (channel == MEM_DC_SYNC) + dc_chan = 1; + else if (channel == MEM_BG_SYNC) + dc_chan = 5; + else + return; + + if (channel == MEM_FG_SYNC) { + /* Enable FG channel */ + reg = __raw_readl(DP_COM_CONF(DP_SYNC)); + __raw_writel(reg | DP_COM_CONF_FG_EN, DP_COM_CONF(DP_SYNC)); + + reg = __raw_readl(IPU_SRM_PRI2) | 0x8; + __raw_writel(reg, IPU_SRM_PRI2); + return; + } + + di = g_dc_di_assignment[dc_chan]; + + /* Make sure other DC sync channel is not assigned same DI */ + reg = __raw_readl(DC_WR_CH_CONF(6 - dc_chan)); + if ((di << 2) == (reg & DC_WR_CH_CONF_PROG_DI_ID)) { + reg &= ~DC_WR_CH_CONF_PROG_DI_ID; + reg |= di ? 0 : DC_WR_CH_CONF_PROG_DI_ID; + __raw_writel(reg, DC_WR_CH_CONF(6 - dc_chan)); + } + + reg = __raw_readl(DC_WR_CH_CONF(dc_chan)); + reg |= 4 << DC_WR_CH_CONF_PROG_TYPE_OFFSET; + __raw_writel(reg, DC_WR_CH_CONF(dc_chan)); + + clk_enable(g_pixel_clk[di]); +} + +static unsigned char dc_swap; + +void ipu_dp_dc_disable(ipu_channel_t channel, unsigned char swap) +{ + uint32_t reg; + uint32_t csc; + uint32_t dc_chan = 0; + int timeout = 50; + + dc_swap = swap; + + if (channel == MEM_DC_SYNC) { + dc_chan = 1; + } else if (channel == MEM_BG_SYNC) { + dc_chan = 5; + } else if (channel == MEM_FG_SYNC) { + /* Disable FG channel */ + dc_chan = 5; + + reg = __raw_readl(DP_COM_CONF(DP_SYNC)); + csc = reg & DP_COM_CONF_CSC_DEF_MASK; + if (csc == DP_COM_CONF_CSC_DEF_FG) + reg &= ~DP_COM_CONF_CSC_DEF_MASK; + + reg &= ~DP_COM_CONF_FG_EN; + __raw_writel(reg, DP_COM_CONF(DP_SYNC)); + + reg = __raw_readl(IPU_SRM_PRI2) | 0x8; + __raw_writel(reg, IPU_SRM_PRI2); + + timeout = 50; + + /* + * Wait for DC triple buffer to empty, + * this check is useful for tv overlay. + */ + if (g_dc_di_assignment[dc_chan] == 0) + while ((__raw_readl(DC_STAT) & 0x00000002) + != 0x00000002) { + udelay(2000); + timeout -= 2; + if (timeout <= 0) + break; + } + else if (g_dc_di_assignment[dc_chan] == 1) + while ((__raw_readl(DC_STAT) & 0x00000020) + != 0x00000020) { + udelay(2000); + timeout -= 2; + if (timeout <= 0) + break; + } + return; + } else { + return; + } + + if (dc_swap) { + /* Swap DC channel 1 and 5 settings, and disable old dc chan */ + reg = __raw_readl(DC_WR_CH_CONF(dc_chan)); + __raw_writel(reg, DC_WR_CH_CONF(6 - dc_chan)); + reg &= ~DC_WR_CH_CONF_PROG_TYPE_MASK; + reg ^= DC_WR_CH_CONF_PROG_DI_ID; + __raw_writel(reg, DC_WR_CH_CONF(dc_chan)); + } else { + timeout = 50; + + /* Wait for DC triple buffer to empty */ + if (g_dc_di_assignment[dc_chan] == 0) + while ((__raw_readl(DC_STAT) & 0x00000002) + != 0x00000002) { + udelay(2000); + timeout -= 2; + if (timeout <= 0) + break; + } + else if (g_dc_di_assignment[dc_chan] == 1) + while ((__raw_readl(DC_STAT) & 0x00000020) + != 0x00000020) { + udelay(2000); + timeout -= 2; + if (timeout <= 0) + break; + } + + reg = __raw_readl(DC_WR_CH_CONF(dc_chan)); + reg &= ~DC_WR_CH_CONF_PROG_TYPE_MASK; + __raw_writel(reg, DC_WR_CH_CONF(dc_chan)); + + reg = __raw_readl(IPU_DISP_GEN); + if (g_dc_di_assignment[dc_chan]) + reg &= ~DI1_COUNTER_RELEASE; + else + reg &= ~DI0_COUNTER_RELEASE; + __raw_writel(reg, IPU_DISP_GEN); + + /* Clock is already off because it must be done quickly, but + we need to fix the ref count */ + clk_disable(g_pixel_clk[g_dc_di_assignment[dc_chan]]); + } +} + +void ipu_init_dc_mappings(void) +{ + /* IPU_PIX_FMT_RGB24 */ + ipu_dc_map_clear(0); + ipu_dc_map_config(0, 0, 7, 0xFF); + ipu_dc_map_config(0, 1, 15, 0xFF); + ipu_dc_map_config(0, 2, 23, 0xFF); + + /* IPU_PIX_FMT_RGB666 */ + ipu_dc_map_clear(1); + ipu_dc_map_config(1, 0, 5, 0xFC); + ipu_dc_map_config(1, 1, 11, 0xFC); + ipu_dc_map_config(1, 2, 17, 0xFC); + + /* IPU_PIX_FMT_YUV444 */ + ipu_dc_map_clear(2); + ipu_dc_map_config(2, 0, 15, 0xFF); + ipu_dc_map_config(2, 1, 23, 0xFF); + ipu_dc_map_config(2, 2, 7, 0xFF); + + /* IPU_PIX_FMT_RGB565 */ + ipu_dc_map_clear(3); + ipu_dc_map_config(3, 0, 4, 0xF8); + ipu_dc_map_config(3, 1, 10, 0xFC); + ipu_dc_map_config(3, 2, 15, 0xF8); + + /* IPU_PIX_FMT_LVDS666 */ + ipu_dc_map_clear(4); + ipu_dc_map_config(4, 0, 5, 0xFC); + ipu_dc_map_config(4, 1, 13, 0xFC); + ipu_dc_map_config(4, 2, 21, 0xFC); +} + +int ipu_pixfmt_to_map(uint32_t fmt) +{ + switch (fmt) { + case IPU_PIX_FMT_GENERIC: + case IPU_PIX_FMT_RGB24: + return 0; + case IPU_PIX_FMT_RGB666: + return 1; + case IPU_PIX_FMT_YUV444: + return 2; + case IPU_PIX_FMT_RGB565: + return 3; + case IPU_PIX_FMT_LVDS666: + return 4; + } + + return -1; +} + +/* + * This function is called to adapt synchronous LCD panel to IPU restriction. + */ +void adapt_panel_to_ipu_restricitions(uint32_t *pixel_clk, + uint16_t width, uint16_t height, + uint16_t h_start_width, + uint16_t h_end_width, + uint16_t v_start_width, + uint16_t *v_end_width) +{ + if (*v_end_width < 2) { + uint16_t total_width = width + h_start_width + h_end_width; + uint16_t total_height_old = height + v_start_width + + (*v_end_width); + uint16_t total_height_new = height + v_start_width + 2; + *v_end_width = 2; + *pixel_clk = (*pixel_clk) * total_width * total_height_new / + (total_width * total_height_old); + printf("WARNING: adapt panel end blank lines\n"); + } +} + +/* + * This function is called to initialize a synchronous LCD panel. + * + * @param disp The DI the panel is attached to. + * + * @param pixel_clk Desired pixel clock frequency in Hz. + * + * @param pixel_fmt Input parameter for pixel format of buffer. + * Pixel format is a FOURCC ASCII code. + * + * @param width The width of panel in pixels. + * + * @param height The height of panel in pixels. + * + * @param hStartWidth The number of pixel clocks between the HSYNC + * signal pulse and the start of valid data. + * + * @param hSyncWidth The width of the HSYNC signal in units of pixel + * clocks. + * + * @param hEndWidth The number of pixel clocks between the end of + * valid data and the HSYNC signal for next line. + * + * @param vStartWidth The number of lines between the VSYNC + * signal pulse and the start of valid data. + * + * @param vSyncWidth The width of the VSYNC signal in units of lines + * + * @param vEndWidth The number of lines between the end of valid + * data and the VSYNC signal for next frame. + * + * @param sig Bitfield of signal polarities for LCD interface. + * + * @return This function returns 0 on success or negative error code on + * fail. + */ + +int32_t ipu_init_sync_panel(int disp, uint32_t pixel_clk, + uint16_t width, uint16_t height, + uint32_t pixel_fmt, + uint16_t h_start_width, uint16_t h_sync_width, + uint16_t h_end_width, uint16_t v_start_width, + uint16_t v_sync_width, uint16_t v_end_width, + uint32_t v_to_h_sync, ipu_di_signal_cfg_t sig) +{ + uint32_t reg; + uint32_t di_gen, vsync_cnt; + uint32_t div, rounded_pixel_clk; + uint32_t h_total, v_total; + int map; + struct clk *di_parent; + + debug("panel size = %d x %d\n", width, height); + + if ((v_sync_width == 0) || (h_sync_width == 0)) + return EINVAL; + + adapt_panel_to_ipu_restricitions(&pixel_clk, width, height, + h_start_width, h_end_width, + v_start_width, &v_end_width); + h_total = width + h_sync_width + h_start_width + h_end_width; + v_total = height + v_sync_width + v_start_width + v_end_width; + + /* Init clocking */ + debug("pixel clk = %d\n", pixel_clk); + + if (sig.ext_clk) { + if (!(g_di1_tvout && (disp == 1))) { /*not round div for tvout*/ + /* + * Set the PLL to be an even multiple + * of the pixel clock. + */ + if ((clk_get_usecount(g_pixel_clk[0]) == 0) && + (clk_get_usecount(g_pixel_clk[1]) == 0)) { + di_parent = clk_get_parent(g_di_clk[disp]); + rounded_pixel_clk = + clk_round_rate(g_pixel_clk[disp], + pixel_clk); + div = clk_get_rate(di_parent) / + rounded_pixel_clk; + if (div % 2) + div++; + if (clk_get_rate(di_parent) != div * + rounded_pixel_clk) + clk_set_rate(di_parent, + div * rounded_pixel_clk); + udelay(10000); + clk_set_rate(g_di_clk[disp], + 2 * rounded_pixel_clk); + udelay(10000); + } + } + clk_set_parent(g_pixel_clk[disp], g_di_clk[disp]); + } else { + if (clk_get_usecount(g_pixel_clk[disp]) != 0) + clk_set_parent(g_pixel_clk[disp], g_ipu_clk); + } + rounded_pixel_clk = clk_round_rate(g_pixel_clk[disp], pixel_clk); + clk_set_rate(g_pixel_clk[disp], rounded_pixel_clk); + udelay(5000); + /* Get integer portion of divider */ + div = clk_get_rate(clk_get_parent(g_pixel_clk[disp])) / + rounded_pixel_clk; + + ipu_di_data_wave_config(disp, SYNC_WAVE, div - 1, div - 1); + ipu_di_data_pin_config(disp, SYNC_WAVE, DI_PIN15, 3, 0, div * 2); + + map = ipu_pixfmt_to_map(pixel_fmt); + if (map < 0) { + debug("IPU_DISP: No MAP\n"); + return -EINVAL; + } + + di_gen = __raw_readl(DI_GENERAL(disp)); + + if (sig.interlaced) { + /* Setup internal HSYNC waveform */ + ipu_di_sync_config( + disp, /* display */ + 1, /* counter */ + h_total / 2 - 1,/* run count */ + DI_SYNC_CLK, /* run_resolution */ + 0, /* offset */ + DI_SYNC_NONE, /* offset resolution */ + 0, /* repeat count */ + DI_SYNC_NONE, /* CNT_CLR_SEL */ + 0, /* CNT_POLARITY_GEN_EN */ + DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */ + DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */ + 0, /* COUNT UP */ + 0 /* COUNT DOWN */ + ); + + /* Field 1 VSYNC waveform */ + ipu_di_sync_config( + disp, /* display */ + 2, /* counter */ + h_total - 1, /* run count */ + DI_SYNC_CLK, /* run_resolution */ + 0, /* offset */ + DI_SYNC_NONE, /* offset resolution */ + 0, /* repeat count */ + DI_SYNC_NONE, /* CNT_CLR_SEL */ + 0, /* CNT_POLARITY_GEN_EN */ + DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */ + DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */ + 0, /* COUNT UP */ + 4 /* COUNT DOWN */ + ); + + /* Setup internal HSYNC waveform */ + ipu_di_sync_config( + disp, /* display */ + 3, /* counter */ + v_total * 2 - 1,/* run count */ + DI_SYNC_INT_HSYNC, /* run_resolution */ + 1, /* offset */ + DI_SYNC_INT_HSYNC, /* offset resolution */ + 0, /* repeat count */ + DI_SYNC_NONE, /* CNT_CLR_SEL */ + 0, /* CNT_POLARITY_GEN_EN */ + DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */ + DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */ + 0, /* COUNT UP */ + 4 /* COUNT DOWN */ + ); + + /* Active Field ? */ + ipu_di_sync_config( + disp, /* display */ + 4, /* counter */ + v_total / 2 - 1,/* run count */ + DI_SYNC_HSYNC, /* run_resolution */ + v_start_width, /* offset */ + DI_SYNC_HSYNC, /* offset resolution */ + 2, /* repeat count */ + DI_SYNC_VSYNC, /* CNT_CLR_SEL */ + 0, /* CNT_POLARITY_GEN_EN */ + DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */ + DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */ + 0, /* COUNT UP */ + 0 /* COUNT DOWN */ + ); + + /* Active Line */ + ipu_di_sync_config( + disp, /* display */ + 5, /* counter */ + 0, /* run count */ + DI_SYNC_HSYNC, /* run_resolution */ + 0, /* offset */ + DI_SYNC_NONE, /* offset resolution */ + height / 2, /* repeat count */ + 4, /* CNT_CLR_SEL */ + 0, /* CNT_POLARITY_GEN_EN */ + DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */ + DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */ + 0, /* COUNT UP */ + 0 /* COUNT DOWN */ + ); + + /* Field 0 VSYNC waveform */ + ipu_di_sync_config( + disp, /* display */ + 6, /* counter */ + v_total - 1, /* run count */ + DI_SYNC_HSYNC, /* run_resolution */ + 0, /* offset */ + DI_SYNC_NONE, /* offset resolution */ + 0, /* repeat count */ + DI_SYNC_NONE, /* CNT_CLR_SEL */ + 0, /* CNT_POLARITY_GEN_EN */ + DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */ + DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */ + 0, /* COUNT UP */ + 0 /* COUNT DOWN */ + ); + + /* DC VSYNC waveform */ + vsync_cnt = 7; + ipu_di_sync_config( + disp, /* display */ + 7, /* counter */ + v_total / 2 - 1,/* run count */ + DI_SYNC_HSYNC, /* run_resolution */ + 9, /* offset */ + DI_SYNC_HSYNC, /* offset resolution */ + 2, /* repeat count */ + DI_SYNC_VSYNC, /* CNT_CLR_SEL */ + 0, /* CNT_POLARITY_GEN_EN */ + DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */ + DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */ + 0, /* COUNT UP */ + 0 /* COUNT DOWN */ + ); + + /* active pixel waveform */ + ipu_di_sync_config( + disp, /* display */ + 8, /* counter */ + 0, /* run count */ + DI_SYNC_CLK, /* run_resolution */ + h_start_width, /* offset */ + DI_SYNC_CLK, /* offset resolution */ + width, /* repeat count */ + 5, /* CNT_CLR_SEL */ + 0, /* CNT_POLARITY_GEN_EN */ + DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */ + DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */ + 0, /* COUNT UP */ + 0 /* COUNT DOWN */ + ); + + ipu_di_sync_config( + disp, /* display */ + 9, /* counter */ + v_total - 1, /* run count */ + DI_SYNC_INT_HSYNC,/* run_resolution */ + v_total / 2, /* offset */ + DI_SYNC_INT_HSYNC,/* offset resolution */ + 0, /* repeat count */ + DI_SYNC_HSYNC, /* CNT_CLR_SEL */ + 0, /* CNT_POLARITY_GEN_EN */ + DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */ + DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */ + 0, /* COUNT UP */ + 4 /* COUNT DOWN */ + ); + + /* set gentime select and tag sel */ + reg = __raw_readl(DI_SW_GEN1(disp, 9)); + reg &= 0x1FFFFFFF; + reg |= (3 - 1)<<29 | 0x00008000; + __raw_writel(reg, DI_SW_GEN1(disp, 9)); + + __raw_writel(v_total / 2 - 1, DI_SCR_CONF(disp)); + + /* set y_sel = 1 */ + di_gen |= 0x10000000; + di_gen |= DI_GEN_POLARITY_5; + di_gen |= DI_GEN_POLARITY_8; + } else { + /* Setup internal HSYNC waveform */ + ipu_di_sync_config(disp, 1, h_total - 1, DI_SYNC_CLK, + 0, DI_SYNC_NONE, 0, DI_SYNC_NONE, + 0, DI_SYNC_NONE, + DI_SYNC_NONE, 0, 0); + + /* Setup external (delayed) HSYNC waveform */ + ipu_di_sync_config(disp, DI_SYNC_HSYNC, h_total - 1, + DI_SYNC_CLK, div * v_to_h_sync, DI_SYNC_CLK, + 0, DI_SYNC_NONE, 1, DI_SYNC_NONE, + DI_SYNC_CLK, 0, h_sync_width * 2); + /* Setup VSYNC waveform */ + vsync_cnt = DI_SYNC_VSYNC; + ipu_di_sync_config(disp, DI_SYNC_VSYNC, v_total - 1, + DI_SYNC_INT_HSYNC, 0, DI_SYNC_NONE, 0, + DI_SYNC_NONE, 1, DI_SYNC_NONE, + DI_SYNC_INT_HSYNC, 0, v_sync_width * 2); + __raw_writel(v_total - 1, DI_SCR_CONF(disp)); + + /* Setup active data waveform to sync with DC */ + ipu_di_sync_config(disp, 4, 0, DI_SYNC_HSYNC, + v_sync_width + v_start_width, DI_SYNC_HSYNC, + height, + DI_SYNC_VSYNC, 0, DI_SYNC_NONE, + DI_SYNC_NONE, 0, 0); + ipu_di_sync_config(disp, 5, 0, DI_SYNC_CLK, + h_sync_width + h_start_width, DI_SYNC_CLK, + width, 4, 0, DI_SYNC_NONE, DI_SYNC_NONE, 0, + 0); + + /* reset all unused counters */ + __raw_writel(0, DI_SW_GEN0(disp, 6)); + __raw_writel(0, DI_SW_GEN1(disp, 6)); + __raw_writel(0, DI_SW_GEN0(disp, 7)); + __raw_writel(0, DI_SW_GEN1(disp, 7)); + __raw_writel(0, DI_SW_GEN0(disp, 8)); + __raw_writel(0, DI_SW_GEN1(disp, 8)); + __raw_writel(0, DI_SW_GEN0(disp, 9)); + __raw_writel(0, DI_SW_GEN1(disp, 9)); + + reg = __raw_readl(DI_STP_REP(disp, 6)); + reg &= 0x0000FFFF; + __raw_writel(reg, DI_STP_REP(disp, 6)); + __raw_writel(0, DI_STP_REP(disp, 7)); + __raw_writel(0, DI_STP_REP(disp, 9)); + + /* Init template microcode */ + if (disp) { + ipu_dc_write_tmpl(2, WROD(0), 0, map, SYNC_WAVE, 8, 5); + ipu_dc_write_tmpl(3, WROD(0), 0, map, SYNC_WAVE, 4, 5); + ipu_dc_write_tmpl(4, WROD(0), 0, map, SYNC_WAVE, 0, 5); + } else { + ipu_dc_write_tmpl(5, WROD(0), 0, map, SYNC_WAVE, 8, 5); + ipu_dc_write_tmpl(6, WROD(0), 0, map, SYNC_WAVE, 4, 5); + ipu_dc_write_tmpl(7, WROD(0), 0, map, SYNC_WAVE, 0, 5); + } + + if (sig.Hsync_pol) + di_gen |= DI_GEN_POLARITY_2; + if (sig.Vsync_pol) + di_gen |= DI_GEN_POLARITY_3; + + if (sig.clk_pol) + di_gen |= DI_GEN_POL_CLK; + + } + + __raw_writel(di_gen, DI_GENERAL(disp)); + + __raw_writel((--vsync_cnt << DI_VSYNC_SEL_OFFSET) | + 0x00000002, DI_SYNC_AS_GEN(disp)); + + reg = __raw_readl(DI_POL(disp)); + reg &= ~(DI_POL_DRDY_DATA_POLARITY | DI_POL_DRDY_POLARITY_15); + if (sig.enable_pol) + reg |= DI_POL_DRDY_POLARITY_15; + if (sig.data_pol) + reg |= DI_POL_DRDY_DATA_POLARITY; + __raw_writel(reg, DI_POL(disp)); + + __raw_writel(width, DC_DISP_CONF2(DC_DISP_ID_SYNC(disp))); + + return 0; +} + +/* + * This function sets the foreground and background plane global alpha blending + * modes. This function also sets the DP graphic plane according to the + * parameter of IPUv3 DP channel. + * + * @param channel IPUv3 DP channel + * + * @param enable Boolean to enable or disable global alpha + * blending. If disabled, local blending is used. + * + * @param alpha Global alpha value. + * + * @return Returns 0 on success or negative error code on fail + */ +int32_t ipu_disp_set_global_alpha(ipu_channel_t channel, unsigned char enable, + uint8_t alpha) +{ + uint32_t reg; + uint32_t flow; + + unsigned char bg_chan; + + if (channel == MEM_BG_SYNC || channel == MEM_FG_SYNC) + flow = DP_SYNC; + else if (channel == MEM_BG_ASYNC0 || channel == MEM_FG_ASYNC0) + flow = DP_ASYNC0; + else if (channel == MEM_BG_ASYNC1 || channel == MEM_FG_ASYNC1) + flow = DP_ASYNC1; + else + return -EINVAL; + + if (channel == MEM_BG_SYNC || channel == MEM_BG_ASYNC0 || + channel == MEM_BG_ASYNC1) + bg_chan = 1; + else + bg_chan = 0; + + if (!g_ipu_clk_enabled) + clk_enable(g_ipu_clk); + + if (bg_chan) { + reg = __raw_readl(DP_COM_CONF(flow)); + __raw_writel(reg & ~DP_COM_CONF_GWSEL, DP_COM_CONF(flow)); + } else { + reg = __raw_readl(DP_COM_CONF(flow)); + __raw_writel(reg | DP_COM_CONF_GWSEL, DP_COM_CONF(flow)); + } + + if (enable) { + reg = __raw_readl(DP_GRAPH_WIND_CTRL(flow)) & 0x00FFFFFFL; + __raw_writel(reg | ((uint32_t) alpha << 24), + DP_GRAPH_WIND_CTRL(flow)); + + reg = __raw_readl(DP_COM_CONF(flow)); + __raw_writel(reg | DP_COM_CONF_GWAM, DP_COM_CONF(flow)); + } else { + reg = __raw_readl(DP_COM_CONF(flow)); + __raw_writel(reg & ~DP_COM_CONF_GWAM, DP_COM_CONF(flow)); + } + + reg = __raw_readl(IPU_SRM_PRI2) | 0x8; + __raw_writel(reg, IPU_SRM_PRI2); + + if (!g_ipu_clk_enabled) + clk_disable(g_ipu_clk); + + return 0; +} + +/* + * This function sets the transparent color key for SDC graphic plane. + * + * @param channel Input parameter for the logical channel ID. + * + * @param enable Boolean to enable or disable color key + * + * @param colorKey 24-bit RGB color for transparent color key. + * + * @return Returns 0 on success or negative error code on fail + */ +int32_t ipu_disp_set_color_key(ipu_channel_t channel, unsigned char enable, + uint32_t color_key) +{ + uint32_t reg, flow; + int y, u, v; + int red, green, blue; + + if (channel == MEM_BG_SYNC || channel == MEM_FG_SYNC) + flow = DP_SYNC; + else if (channel == MEM_BG_ASYNC0 || channel == MEM_FG_ASYNC0) + flow = DP_ASYNC0; + else if (channel == MEM_BG_ASYNC1 || channel == MEM_FG_ASYNC1) + flow = DP_ASYNC1; + else + return -EINVAL; + + if (!g_ipu_clk_enabled) + clk_enable(g_ipu_clk); + + color_key_4rgb = 1; + /* Transform color key from rgb to yuv if CSC is enabled */ + if (((fg_csc_type == RGB2YUV) && (bg_csc_type == YUV2YUV)) || + ((fg_csc_type == YUV2YUV) && (bg_csc_type == RGB2YUV)) || + ((fg_csc_type == YUV2YUV) && (bg_csc_type == YUV2YUV)) || + ((fg_csc_type == YUV2RGB) && (bg_csc_type == YUV2RGB))) { + + debug("color key 0x%x need change to yuv fmt\n", color_key); + + red = (color_key >> 16) & 0xFF; + green = (color_key >> 8) & 0xFF; + blue = color_key & 0xFF; + + y = rgb_to_yuv(0, red, green, blue); + u = rgb_to_yuv(1, red, green, blue); + v = rgb_to_yuv(2, red, green, blue); + color_key = (y << 16) | (u << 8) | v; + + color_key_4rgb = 0; + + debug("color key change to yuv fmt 0x%x\n", color_key); + } + + if (enable) { + reg = __raw_readl(DP_GRAPH_WIND_CTRL(flow)) & 0xFF000000L; + __raw_writel(reg | color_key, DP_GRAPH_WIND_CTRL(flow)); + + reg = __raw_readl(DP_COM_CONF(flow)); + __raw_writel(reg | DP_COM_CONF_GWCKE, DP_COM_CONF(flow)); + } else { + reg = __raw_readl(DP_COM_CONF(flow)); + __raw_writel(reg & ~DP_COM_CONF_GWCKE, DP_COM_CONF(flow)); + } + + reg = __raw_readl(IPU_SRM_PRI2) | 0x8; + __raw_writel(reg, IPU_SRM_PRI2); + + if (!g_ipu_clk_enabled) + clk_disable(g_ipu_clk); + + return 0; +} diff --git a/drivers/video/ipu_regs.h b/drivers/video/ipu_regs.h new file mode 100644 index 0000000000..36f07bbee3 --- /dev/null +++ b/drivers/video/ipu_regs.h @@ -0,0 +1,418 @@ +/* + * Porting to u-boot: + * + * (C) Copyright 2010 + * Stefano Babic, DENX Software Engineering, sbabic@denx.de + * + * Linux IPU driver for MX51: + * + * (C) Copyright 2005-2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __IPU_REGS_INCLUDED__ +#define __IPU_REGS_INCLUDED__ + +#define IPU_DISP0_BASE 0x00000000 +#define IPU_MCU_T_DEFAULT 8 +#define IPU_DISP1_BASE (IPU_MCU_T_DEFAULT << 25) +#define IPU_CM_REG_BASE 0x1E000000 +#define IPU_STAT_REG_BASE 0x1E000200 +#define IPU_IDMAC_REG_BASE 0x1E008000 +#define IPU_ISP_REG_BASE 0x1E010000 +#define IPU_DP_REG_BASE 0x1E018000 +#define IPU_IC_REG_BASE 0x1E020000 +#define IPU_IRT_REG_BASE 0x1E028000 +#define IPU_CSI0_REG_BASE 0x1E030000 +#define IPU_CSI1_REG_BASE 0x1E038000 +#define IPU_DI0_REG_BASE 0x1E040000 +#define IPU_DI1_REG_BASE 0x1E048000 +#define IPU_SMFC_REG_BASE 0x1E050000 +#define IPU_DC_REG_BASE 0x1E058000 +#define IPU_DMFC_REG_BASE 0x1E060000 +#define IPU_CPMEM_REG_BASE 0x1F000000 +#define IPU_LUT_REG_BASE 0x1F020000 +#define IPU_SRM_REG_BASE 0x1F040000 +#define IPU_TPM_REG_BASE 0x1F060000 +#define IPU_DC_TMPL_REG_BASE 0x1F080000 +#define IPU_ISP_TBPR_REG_BASE 0x1F0C0000 +#define IPU_VDI_REG_BASE 0x1E068000 + + +extern u32 *ipu_dc_tmpl_reg; + +#define DC_EVT_NF 0 +#define DC_EVT_NL 1 +#define DC_EVT_EOF 2 +#define DC_EVT_NFIELD 3 +#define DC_EVT_EOL 4 +#define DC_EVT_EOFIELD 5 +#define DC_EVT_NEW_ADDR 6 +#define DC_EVT_NEW_CHAN 7 +#define DC_EVT_NEW_DATA 8 + +#define DC_EVT_NEW_ADDR_W_0 0 +#define DC_EVT_NEW_ADDR_W_1 1 +#define DC_EVT_NEW_CHAN_W_0 2 +#define DC_EVT_NEW_CHAN_W_1 3 +#define DC_EVT_NEW_DATA_W_0 4 +#define DC_EVT_NEW_DATA_W_1 5 +#define DC_EVT_NEW_ADDR_R_0 6 +#define DC_EVT_NEW_ADDR_R_1 7 +#define DC_EVT_NEW_CHAN_R_0 8 +#define DC_EVT_NEW_CHAN_R_1 9 +#define DC_EVT_NEW_DATA_R_0 10 +#define DC_EVT_NEW_DATA_R_1 11 + +/* Software reset for ipu */ +#define SW_IPU_RST 8 + +enum { + IPU_CONF_DP_EN = 0x00000020, + IPU_CONF_DI0_EN = 0x00000040, + IPU_CONF_DI1_EN = 0x00000080, + IPU_CONF_DMFC_EN = 0x00000400, + IPU_CONF_DC_EN = 0x00000200, + + DI0_COUNTER_RELEASE = 0x01000000, + DI1_COUNTER_RELEASE = 0x02000000, + + DI_DW_GEN_ACCESS_SIZE_OFFSET = 24, + DI_DW_GEN_COMPONENT_SIZE_OFFSET = 16, + + DI_GEN_DI_CLK_EXT = 0x100000, + DI_GEN_POLARITY_1 = 0x00000001, + DI_GEN_POLARITY_2 = 0x00000002, + DI_GEN_POLARITY_3 = 0x00000004, + DI_GEN_POLARITY_4 = 0x00000008, + DI_GEN_POLARITY_5 = 0x00000010, + DI_GEN_POLARITY_6 = 0x00000020, + DI_GEN_POLARITY_7 = 0x00000040, + DI_GEN_POLARITY_8 = 0x00000080, + DI_GEN_POL_CLK = 0x20000, + + DI_POL_DRDY_DATA_POLARITY = 0x00000080, + DI_POL_DRDY_POLARITY_15 = 0x00000010, + DI_VSYNC_SEL_OFFSET = 13, + + DC_WR_CH_CONF_FIELD_MODE = 0x00000200, + DC_WR_CH_CONF_PROG_TYPE_OFFSET = 5, + DC_WR_CH_CONF_PROG_TYPE_MASK = 0x000000E0, + DC_WR_CH_CONF_PROG_DI_ID = 0x00000004, + DC_WR_CH_CONF_PROG_DISP_ID_OFFSET = 3, + DC_WR_CH_CONF_PROG_DISP_ID_MASK = 0x00000018, + + DP_COM_CONF_FG_EN = 0x00000001, + DP_COM_CONF_GWSEL = 0x00000002, + DP_COM_CONF_GWAM = 0x00000004, + DP_COM_CONF_GWCKE = 0x00000008, + DP_COM_CONF_CSC_DEF_MASK = 0x00000300, + DP_COM_CONF_CSC_DEF_OFFSET = 8, + DP_COM_CONF_CSC_DEF_FG = 0x00000300, + DP_COM_CONF_CSC_DEF_BG = 0x00000200, + DP_COM_CONF_CSC_DEF_BOTH = 0x00000100, + DP_COM_CONF_GAMMA_EN = 0x00001000, + DP_COM_CONF_GAMMA_YUV_EN = 0x00002000, +}; + +enum di_pins { + DI_PIN11 = 0, + DI_PIN12 = 1, + DI_PIN13 = 2, + DI_PIN14 = 3, + DI_PIN15 = 4, + DI_PIN16 = 5, + DI_PIN17 = 6, + DI_PIN_CS = 7, + + DI_PIN_SER_CLK = 0, + DI_PIN_SER_RS = 1, +}; + +enum di_sync_wave { + DI_SYNC_NONE = -1, + DI_SYNC_CLK = 0, + DI_SYNC_INT_HSYNC = 1, + DI_SYNC_HSYNC = 2, + DI_SYNC_VSYNC = 3, + DI_SYNC_DE = 5, +}; + +struct ipu_cm { + u32 conf; + u32 sisg_ctrl0; + u32 sisg_ctrl1; + u32 sisg_set[6]; + u32 sisg_clear[6]; + u32 int_ctrl[15]; + u32 sdma_event[10]; + u32 srm_pri1; + u32 srm_pri2; + u32 fs_proc_flow[3]; + u32 fs_disp_flow[2]; + u32 skip; + u32 disp_alt_conf; + u32 disp_gen; + u32 disp_alt[4]; + u32 snoop; + u32 mem_rst; + u32 pm; + u32 gpr; + u32 reserved0[26]; + u32 ch_db_mode_sel[2]; + u32 reserved1[16]; + u32 alt_ch_db_mode_sel[2]; + u32 reserved2[2]; + u32 ch_trb_mode_sel[2]; +}; + +struct ipu_idmac { + u32 conf; + u32 ch_en[2]; + u32 sep_alpha; + u32 alt_sep_alpha; + u32 ch_pri[2]; + u32 wm_en[2]; + u32 lock_en[2]; + u32 sub_addr[5]; + u32 bndm_en[2]; + u32 sc_cord[2]; + u32 reserved[45]; + u32 ch_busy[2]; +}; + +struct ipu_com_async { + u32 com_conf_async; + u32 graph_wind_ctrl_async; + u32 fg_pos_async; + u32 cur_pos_async; + u32 cur_map_async; + u32 gamma_c_async[8]; + u32 gamma_s_async[4]; + u32 dp_csca_async[4]; + u32 dp_csc_async[2]; +}; + +struct ipu_dp { + u32 com_conf_sync; + u32 graph_wind_ctrl_sync; + u32 fg_pos_sync; + u32 cur_pos_sync; + u32 cur_map_sync; + u32 gamma_c_sync[8]; + u32 gamma_s_sync[4]; + u32 csca_sync[4]; + u32 csc_sync[2]; + u32 cur_pos_alt; + struct ipu_com_async async[2]; +}; + +struct ipu_di { + u32 general; + u32 bs_clkgen0; + u32 bs_clkgen1; + u32 sw_gen0[9]; + u32 sw_gen1[9]; + u32 sync_as; + u32 dw_gen[12]; + u32 dw_set[48]; + u32 stp_rep[4]; + u32 stp_rep9; + u32 ser_conf; + u32 ssc; + u32 pol; + u32 aw0; + u32 aw1; + u32 scr_conf; + u32 stat; +}; + +struct ipu_stat { + u32 int_stat[15]; + u32 cur_buf[2]; + u32 alt_cur_buf_0; + u32 alt_cur_buf_1; + u32 srm_stat; + u32 proc_task_stat; + u32 disp_task_stat; + u32 triple_cur_buf[4]; + u32 ch_buf0_rdy[2]; + u32 ch_buf1_rdy[2]; + u32 alt_ch_buf0_rdy[2]; + u32 alt_ch_buf1_rdy[2]; + u32 ch_buf2_rdy[2]; +}; + +struct ipu_dc_ch { + u32 wr_ch_conf; + u32 wr_ch_addr; + u32 rl[5]; +}; + +struct ipu_dc { + struct ipu_dc_ch dc_ch0_1_2[3]; + u32 cmd_ch_conf_3; + u32 cmd_ch_conf_4; + struct ipu_dc_ch dc_ch5_6[2]; + struct ipu_dc_ch dc_ch8; + u32 rl6_ch_8; + struct ipu_dc_ch dc_ch9; + u32 rl6_ch_9; + u32 gen; + u32 disp_conf1[4]; + u32 disp_conf2[4]; + u32 di0_conf[2]; + u32 di1_conf[2]; + u32 dc_map_ptr[15]; + u32 dc_map_val[12]; + u32 udge[16]; + u32 lla[2]; + u32 r_lla[2]; + u32 wr_ch_addr_5_alt; + u32 stat; +}; + +struct ipu_dmfc { + u32 rd_chan; + u32 wr_chan; + u32 wr_chan_def; + u32 dp_chan; + u32 dp_chan_def; + u32 general[2]; + u32 ic_ctrl; + u32 wr_chan_alt; + u32 wr_chan_def_alt; + u32 general1_alt; + u32 stat; +}; + +#define IPU_CM_REG ((struct ipu_cm *)(IPU_CTRL_BASE_ADDR + \ + IPU_CM_REG_BASE)) +#define IPU_CONF (&IPU_CM_REG->conf) +#define IPU_SRM_PRI1 (&IPU_CM_REG->srm_pri1) +#define IPU_SRM_PRI2 (&IPU_CM_REG->srm_pri2) +#define IPU_FS_PROC_FLOW1 (&IPU_CM_REG->fs_proc_flow[0]) +#define IPU_FS_PROC_FLOW2 (&IPU_CM_REG->fs_proc_flow[1]) +#define IPU_FS_PROC_FLOW3 (&IPU_CM_REG->fs_proc_flow[2]) +#define IPU_FS_DISP_FLOW1 (&IPU_CM_REG->fs_disp_flow[0]) +#define IPU_DISP_GEN (&IPU_CM_REG->disp_gen) +#define IPU_MEM_RST (&IPU_CM_REG->mem_rst) +#define IPU_GPR (&IPU_CM_REG->gpr) +#define IPU_CHA_DB_MODE_SEL(ch) (&IPU_CM_REG->ch_db_mode_sel[ch / 32]) + +#define IPU_STAT ((struct ipu_stat *)(IPU_CTRL_BASE_ADDR + \ + IPU_STAT_REG_BASE)) +#define IPU_CHA_CUR_BUF(ch) (&IPU_STAT->cur_buf[ch / 32]) +#define IPU_CHA_BUF0_RDY(ch) (&IPU_STAT->ch_buf0_rdy[ch / 32]) +#define IPU_CHA_BUF1_RDY(ch) (&IPU_STAT->ch_buf1_rdy[ch / 32]) + +#define IPU_INT_CTRL(n) (&IPU_CM_REG->int_ctrl[(n) - 1]) + +#define IDMAC_REG ((struct ipu_idmac *)(IPU_CTRL_BASE_ADDR + \ + IPU_IDMAC_REG_BASE)) +#define IDMAC_CONF (&IDMAC_REG->conf) +#define IDMAC_CHA_EN(ch) (&IDMAC_REG->ch_en[ch / 32]) +#define IDMAC_CHA_PRI(ch) (&IDMAC_REG->ch_pri[ch / 32]) + +#define DI_REG(di) ((struct ipu_di *)(IPU_CTRL_BASE_ADDR + \ + ((di == 1) ? IPU_DI1_REG_BASE : \ + IPU_DI0_REG_BASE))) +#define DI_GENERAL(di) (&DI_REG(di)->general) +#define DI_BS_CLKGEN0(di) (&DI_REG(di)->bs_clkgen0) +#define DI_BS_CLKGEN1(di) (&DI_REG(di)->bs_clkgen1) + +#define DI_SW_GEN0(di, gen) (&DI_REG(di)->sw_gen0[gen - 1]) +#define DI_SW_GEN1(di, gen) (&DI_REG(di)->sw_gen1[gen - 1]) +#define DI_STP_REP(di, gen) (&DI_REG(di)->stp_rep[(gen - 1) / 2]) +#define DI_SYNC_AS_GEN(di) (&DI_REG(di)->sync_as) +#define DI_DW_GEN(di, gen) (&DI_REG(di)->dw_gen[gen]) +#define DI_DW_SET(di, gen, set) (&DI_REG(di)->dw_set[gen + 12 * set]) +#define DI_POL(di) (&DI_REG(di)->pol) +#define DI_SCR_CONF(di) (&DI_REG(di)->scr_conf) + +#define DMFC_REG ((struct ipu_dmfc *)(IPU_CTRL_BASE_ADDR + \ + IPU_DMFC_REG_BASE)) +#define DMFC_WR_CHAN (&DMFC_REG->wr_chan) +#define DMFC_WR_CHAN_DEF (&DMFC_REG->wr_chan_def) +#define DMFC_DP_CHAN (&DMFC_REG->dp_chan) +#define DMFC_DP_CHAN_DEF (&DMFC_REG->dp_chan_def) +#define DMFC_GENERAL1 (&DMFC_REG->general[0]) +#define DMFC_IC_CTRL (&DMFC_REG->ic_ctrl) + + +#define DC_REG ((struct ipu_dc *)(IPU_CTRL_BASE_ADDR + \ + IPU_DC_REG_BASE)) +#define DC_MAP_CONF_PTR(n) (&DC_REG->dc_map_ptr[n / 2]) +#define DC_MAP_CONF_VAL(n) (&DC_REG->dc_map_val[n / 2]) + + +static inline struct ipu_dc_ch *dc_ch_offset(int ch) +{ + switch (ch) { + case 0: + case 1: + case 2: + return &DC_REG->dc_ch0_1_2[ch]; + case 5: + case 6: + return &DC_REG->dc_ch5_6[ch - 5]; + case 8: + return &DC_REG->dc_ch8; + case 9: + return &DC_REG->dc_ch9; + default: + printf("%s: invalid channel %d\n", __func__, ch); + return NULL; + } + +} + +#define DC_RL_CH(ch, evt) (&dc_ch_offset(ch)->rl[evt / 2]) + +#define DC_WR_CH_CONF(ch) (&dc_ch_offset(ch)->wr_ch_conf) +#define DC_WR_CH_ADDR(ch) (&dc_ch_offset(ch)->wr_ch_addr) + +#define DC_WR_CH_CONF_1 DC_WR_CH_CONF(1) +#define DC_WR_CH_CONF_5 DC_WR_CH_CONF(5) + +#define DC_GEN (&DC_REG->gen) +#define DC_DISP_CONF2(disp) (&DC_REG->disp_conf2[disp]) +#define DC_STAT (&DC_REG->stat) + +#define DP_SYNC 0 +#define DP_ASYNC0 0x60 +#define DP_ASYNC1 0xBC + +#define DP_REG ((struct ipu_dp *)(IPU_CTRL_BASE_ADDR + \ + IPU_DP_REG_BASE)) +#define DP_COM_CONF(flow) (&DP_REG->com_conf_sync) +#define DP_GRAPH_WIND_CTRL(flow) (&DP_REG->graph_wind_ctrl_sync) +#define DP_CSC_A_0(flow) (&DP_REG->csca_sync[0]) +#define DP_CSC_A_1(flow) (&DP_REG->csca_sync[1]) +#define DP_CSC_A_2(flow) (&DP_REG->csca_sync[2]) +#define DP_CSC_A_3(flow) (&DP_REG->csca_sync[3]) + +#define DP_CSC_0(flow) (&DP_REG->csc_sync[0]) +#define DP_CSC_1(flow) (&DP_REG->csc_sync[1]) + +/* DC template opcodes */ +#define WROD(lf) (0x18 | (lf << 1)) + +#endif diff --git a/drivers/video/mxc_ipuv3_fb.c b/drivers/video/mxc_ipuv3_fb.c new file mode 100644 index 0000000000..a66981c27c --- /dev/null +++ b/drivers/video/mxc_ipuv3_fb.c @@ -0,0 +1,642 @@ +/* + * Porting to u-boot: + * + * (C) Copyright 2010 + * Stefano Babic, DENX Software Engineering, sbabic@denx.de + * + * MX51 Linux framebuffer: + * + * (C) Copyright 2004-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* #define DEBUG */ +#include <common.h> +#include <asm/errno.h> +#include <linux/string.h> +#include <linux/list.h> +#include <linux/fb.h> +#include <asm/io.h> +#include <malloc.h> +#include <lcd.h> +#include "videomodes.h" +#include "ipu.h" +#include "mxcfb.h" + +DECLARE_GLOBAL_DATA_PTR; + +void *lcd_base; /* Start of framebuffer memory */ +void *lcd_console_address; /* Start of console buffer */ + +int lcd_line_length; +int lcd_color_fg; +int lcd_color_bg; + +short console_col; +short console_row; + +vidinfo_t panel_info; + +static int mxcfb_map_video_memory(struct fb_info *fbi); +static int mxcfb_unmap_video_memory(struct fb_info *fbi); + +void lcd_initcolregs(void) +{ +} + +void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue) +{ +} + +void lcd_disable(void) +{ +} + +void lcd_panel_disable(void) +{ +} + +void fb_videomode_to_var(struct fb_var_screeninfo *var, + const struct fb_videomode *mode) +{ + var->xres = mode->xres; + var->yres = mode->yres; + var->xres_virtual = mode->xres; + var->yres_virtual = mode->yres; + var->xoffset = 0; + var->yoffset = 0; + var->pixclock = mode->pixclock; + var->left_margin = mode->left_margin; + var->right_margin = mode->right_margin; + var->upper_margin = mode->upper_margin; + var->lower_margin = mode->lower_margin; + var->hsync_len = mode->hsync_len; + var->vsync_len = mode->vsync_len; + var->sync = mode->sync; + var->vmode = mode->vmode & FB_VMODE_MASK; +} + +/* + * Structure containing the MXC specific framebuffer information. + */ +struct mxcfb_info { + int blank; + ipu_channel_t ipu_ch; + int ipu_di; + u32 ipu_di_pix_fmt; + unsigned char overlay; + unsigned char alpha_chan_en; + dma_addr_t alpha_phy_addr0; + dma_addr_t alpha_phy_addr1; + void *alpha_virt_addr0; + void *alpha_virt_addr1; + uint32_t alpha_mem_len; + uint32_t cur_ipu_buf; + uint32_t cur_ipu_alpha_buf; + + u32 pseudo_palette[16]; +}; + +enum { + BOTH_ON, + SRC_ON, + TGT_ON, + BOTH_OFF +}; + +static unsigned long default_bpp = 16; +static unsigned char g_dp_in_use; +static struct fb_info *mxcfb_info[3]; +static int ext_clk_used; + +static uint32_t bpp_to_pixfmt(struct fb_info *fbi) +{ + uint32_t pixfmt = 0; + + debug("bpp_to_pixfmt: %d\n", fbi->var.bits_per_pixel); + + if (fbi->var.nonstd) + return fbi->var.nonstd; + + switch (fbi->var.bits_per_pixel) { + case 24: + pixfmt = IPU_PIX_FMT_BGR24; + break; + case 32: + pixfmt = IPU_PIX_FMT_BGR32; + break; + case 16: + pixfmt = IPU_PIX_FMT_RGB565; + break; + } + return pixfmt; +} + +/* + * Set fixed framebuffer parameters based on variable settings. + * + * @param info framebuffer information pointer + */ +static int mxcfb_set_fix(struct fb_info *info) +{ + struct fb_fix_screeninfo *fix = &info->fix; + struct fb_var_screeninfo *var = &info->var; + + fix->line_length = var->xres_virtual * var->bits_per_pixel / 8; + + fix->type = FB_TYPE_PACKED_PIXELS; + fix->accel = FB_ACCEL_NONE; + fix->visual = FB_VISUAL_TRUECOLOR; + fix->xpanstep = 1; + fix->ypanstep = 1; + + return 0; +} + +static int setup_disp_channel1(struct fb_info *fbi) +{ + ipu_channel_params_t params; + struct mxcfb_info *mxc_fbi = (struct mxcfb_info *)fbi->par; + + memset(¶ms, 0, sizeof(params)); + params.mem_dp_bg_sync.di = mxc_fbi->ipu_di; + + debug("%s called\n", __func__); + /* + * Assuming interlaced means yuv output, below setting also + * valid for mem_dc_sync. FG should have the same vmode as BG. + */ + if (fbi->var.vmode & FB_VMODE_INTERLACED) { + params.mem_dp_bg_sync.interlaced = 1; + params.mem_dp_bg_sync.out_pixel_fmt = + IPU_PIX_FMT_YUV444; + } else { + if (mxc_fbi->ipu_di_pix_fmt) { + params.mem_dp_bg_sync.out_pixel_fmt = + mxc_fbi->ipu_di_pix_fmt; + } else { + params.mem_dp_bg_sync.out_pixel_fmt = + IPU_PIX_FMT_RGB666; + } + } + params.mem_dp_bg_sync.in_pixel_fmt = bpp_to_pixfmt(fbi); + if (mxc_fbi->alpha_chan_en) + params.mem_dp_bg_sync.alpha_chan_en = 1; + + ipu_init_channel(mxc_fbi->ipu_ch, ¶ms); + + return 0; +} + +static int setup_disp_channel2(struct fb_info *fbi) +{ + int retval = 0; + struct mxcfb_info *mxc_fbi = (struct mxcfb_info *)fbi->par; + + mxc_fbi->cur_ipu_buf = 1; + if (mxc_fbi->alpha_chan_en) + mxc_fbi->cur_ipu_alpha_buf = 1; + + fbi->var.xoffset = fbi->var.yoffset = 0; + + debug("%s: %x %d %d %d %lx %lx\n", + __func__, + mxc_fbi->ipu_ch, + fbi->var.xres, + fbi->var.yres, + fbi->fix.line_length, + fbi->fix.smem_start, + fbi->fix.smem_start + + (fbi->fix.line_length * fbi->var.yres)); + + retval = ipu_init_channel_buffer(mxc_fbi->ipu_ch, IPU_INPUT_BUFFER, + bpp_to_pixfmt(fbi), + fbi->var.xres, fbi->var.yres, + fbi->fix.line_length, + fbi->fix.smem_start + + (fbi->fix.line_length * fbi->var.yres), + fbi->fix.smem_start, + 0, 0); + if (retval) + printf("ipu_init_channel_buffer error %d\n", retval); + + return retval; +} + +/* + * Set framebuffer parameters and change the operating mode. + * + * @param info framebuffer information pointer + */ +static int mxcfb_set_par(struct fb_info *fbi) +{ + int retval = 0; + u32 mem_len; + ipu_di_signal_cfg_t sig_cfg; + struct mxcfb_info *mxc_fbi = (struct mxcfb_info *)fbi->par; + uint32_t out_pixel_fmt; + + ipu_disable_channel(mxc_fbi->ipu_ch); + ipu_uninit_channel(mxc_fbi->ipu_ch); + mxcfb_set_fix(fbi); + + mem_len = fbi->var.yres_virtual * fbi->fix.line_length; + if (!fbi->fix.smem_start || (mem_len > fbi->fix.smem_len)) { + if (fbi->fix.smem_start) + mxcfb_unmap_video_memory(fbi); + + if (mxcfb_map_video_memory(fbi) < 0) + return -ENOMEM; + } + + setup_disp_channel1(fbi); + + memset(&sig_cfg, 0, sizeof(sig_cfg)); + if (fbi->var.vmode & FB_VMODE_INTERLACED) { + sig_cfg.interlaced = 1; + out_pixel_fmt = IPU_PIX_FMT_YUV444; + } else { + if (mxc_fbi->ipu_di_pix_fmt) + out_pixel_fmt = mxc_fbi->ipu_di_pix_fmt; + else + out_pixel_fmt = IPU_PIX_FMT_RGB666; + } + if (fbi->var.vmode & FB_VMODE_ODD_FLD_FIRST) /* PAL */ + sig_cfg.odd_field_first = 1; + if ((fbi->var.sync & FB_SYNC_EXT) || ext_clk_used) + sig_cfg.ext_clk = 1; + if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT) + sig_cfg.Hsync_pol = 1; + if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT) + sig_cfg.Vsync_pol = 1; + if (!(fbi->var.sync & FB_SYNC_CLK_LAT_FALL)) + sig_cfg.clk_pol = 1; + if (fbi->var.sync & FB_SYNC_DATA_INVERT) + sig_cfg.data_pol = 1; + if (!(fbi->var.sync & FB_SYNC_OE_LOW_ACT)) + sig_cfg.enable_pol = 1; + if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN) + sig_cfg.clkidle_en = 1; + + debug("pixclock = %ul Hz\n", + (u32) (PICOS2KHZ(fbi->var.pixclock) * 1000UL)); + + if (ipu_init_sync_panel(mxc_fbi->ipu_di, + (PICOS2KHZ(fbi->var.pixclock)) * 1000UL, + fbi->var.xres, fbi->var.yres, + out_pixel_fmt, + fbi->var.left_margin, + fbi->var.hsync_len, + fbi->var.right_margin, + fbi->var.upper_margin, + fbi->var.vsync_len, + fbi->var.lower_margin, + 0, sig_cfg) != 0) { + puts("mxcfb: Error initializing panel.\n"); + return -EINVAL; + } + + retval = setup_disp_channel2(fbi); + if (retval) + return retval; + + if (mxc_fbi->blank == FB_BLANK_UNBLANK) + ipu_enable_channel(mxc_fbi->ipu_ch); + + return retval; +} + +/* + * Check framebuffer variable parameters and adjust to valid values. + * + * @param var framebuffer variable parameters + * + * @param info framebuffer information pointer + */ +static int mxcfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) +{ + u32 vtotal; + u32 htotal; + + if (var->xres_virtual < var->xres) + var->xres_virtual = var->xres; + if (var->yres_virtual < var->yres) + var->yres_virtual = var->yres; + + if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) && + (var->bits_per_pixel != 16) && (var->bits_per_pixel != 8)) + var->bits_per_pixel = default_bpp; + + switch (var->bits_per_pixel) { + case 8: + var->red.length = 3; + var->red.offset = 5; + var->red.msb_right = 0; + + var->green.length = 3; + var->green.offset = 2; + var->green.msb_right = 0; + + var->blue.length = 2; + var->blue.offset = 0; + var->blue.msb_right = 0; + + var->transp.length = 0; + var->transp.offset = 0; + var->transp.msb_right = 0; + break; + case 16: + var->red.length = 5; + var->red.offset = 11; + var->red.msb_right = 0; + + var->green.length = 6; + var->green.offset = 5; + var->green.msb_right = 0; + + var->blue.length = 5; + var->blue.offset = 0; + var->blue.msb_right = 0; + + var->transp.length = 0; + var->transp.offset = 0; + var->transp.msb_right = 0; + break; + case 24: + var->red.length = 8; + var->red.offset = 16; + var->red.msb_right = 0; + + var->green.length = 8; + var->green.offset = 8; + var->green.msb_right = 0; + + var->blue.length = 8; + var->blue.offset = 0; + var->blue.msb_right = 0; + + var->transp.length = 0; + var->transp.offset = 0; + var->transp.msb_right = 0; + break; + case 32: + var->red.length = 8; + var->red.offset = 16; + var->red.msb_right = 0; + + var->green.length = 8; + var->green.offset = 8; + var->green.msb_right = 0; + + var->blue.length = 8; + var->blue.offset = 0; + var->blue.msb_right = 0; + + var->transp.length = 8; + var->transp.offset = 24; + var->transp.msb_right = 0; + break; + } + + if (var->pixclock < 1000) { + htotal = var->xres + var->right_margin + var->hsync_len + + var->left_margin; + vtotal = var->yres + var->lower_margin + var->vsync_len + + var->upper_margin; + var->pixclock = (vtotal * htotal * 6UL) / 100UL; + var->pixclock = KHZ2PICOS(var->pixclock); + printf("pixclock set for 60Hz refresh = %u ps\n", + var->pixclock); + } + + var->height = -1; + var->width = -1; + var->grayscale = 0; + + return 0; +} + +static int mxcfb_map_video_memory(struct fb_info *fbi) +{ + if (fbi->fix.smem_len < fbi->var.yres_virtual * fbi->fix.line_length) { + fbi->fix.smem_len = fbi->var.yres_virtual * + fbi->fix.line_length; + } + + fbi->screen_base = (char *)lcd_base; + fbi->fix.smem_start = (unsigned long)lcd_base; + if (fbi->screen_base == 0) { + puts("Unable to allocate framebuffer memory\n"); + fbi->fix.smem_len = 0; + fbi->fix.smem_start = 0; + return -EBUSY; + } + + debug("allocated fb @ paddr=0x%08X, size=%d.\n", + (uint32_t) fbi->fix.smem_start, fbi->fix.smem_len); + + fbi->screen_size = fbi->fix.smem_len; + + /* Clear the screen */ + memset((char *)fbi->screen_base, 0, fbi->fix.smem_len); + + return 0; +} + +static int mxcfb_unmap_video_memory(struct fb_info *fbi) +{ + fbi->screen_base = 0; + fbi->fix.smem_start = 0; + fbi->fix.smem_len = 0; + return 0; +} + +/* + * Initializes the framebuffer information pointer. After allocating + * sufficient memory for the framebuffer structure, the fields are + * filled with custom information passed in from the configurable + * structures. This includes information such as bits per pixel, + * color maps, screen width/height and RGBA offsets. + * + * @return Framebuffer structure initialized with our information + */ +static struct fb_info *mxcfb_init_fbinfo(void) +{ +#define BYTES_PER_LONG 4 +#define PADDING (BYTES_PER_LONG - (sizeof(struct fb_info) % BYTES_PER_LONG)) + struct fb_info *fbi; + struct mxcfb_info *mxcfbi; + char *p; + int size = sizeof(struct mxcfb_info) + PADDING + + sizeof(struct fb_info); + + debug("%s: %d %d %d %d\n", + __func__, + PADDING, + size, + sizeof(struct mxcfb_info), + sizeof(struct fb_info)); + /* + * Allocate sufficient memory for the fb structure + */ + + p = malloc(size); + if (!p) + return NULL; + + memset(p, 0, size); + + fbi = (struct fb_info *)p; + fbi->par = p + sizeof(struct fb_info) + PADDING; + + mxcfbi = (struct mxcfb_info *)fbi->par; + debug("Framebuffer structures at: fbi=0x%x mxcfbi=0x%x\n", + (unsigned int)fbi, (unsigned int)mxcfbi); + + fbi->var.activate = FB_ACTIVATE_NOW; + + fbi->flags = FBINFO_FLAG_DEFAULT; + fbi->pseudo_palette = mxcfbi->pseudo_palette; + + return fbi; +} + +/* + * Probe routine for the framebuffer driver. It is called during the + * driver binding process. The following functions are performed in + * this routine: Framebuffer initialization, Memory allocation and + * mapping, Framebuffer registration, IPU initialization. + * + * @return Appropriate error code to the kernel common code + */ +static int mxcfb_probe(u32 interface_pix_fmt, struct fb_videomode *mode) +{ + struct fb_info *fbi; + struct mxcfb_info *mxcfbi; + int ret = 0; + + /* + * Initialize FB structures + */ + fbi = mxcfb_init_fbinfo(); + if (!fbi) { + ret = -ENOMEM; + goto err0; + } + mxcfbi = (struct mxcfb_info *)fbi->par; + + if (!g_dp_in_use) { + mxcfbi->ipu_ch = MEM_BG_SYNC; + mxcfbi->blank = FB_BLANK_UNBLANK; + } else { + mxcfbi->ipu_ch = MEM_DC_SYNC; + mxcfbi->blank = FB_BLANK_POWERDOWN; + } + + mxcfbi->ipu_di = 0; + + ipu_disp_set_global_alpha(mxcfbi->ipu_ch, 1, 0x80); + ipu_disp_set_color_key(mxcfbi->ipu_ch, 0, 0); + strcpy(fbi->fix.id, "DISP3 BG"); + + g_dp_in_use = 1; + + mxcfb_info[mxcfbi->ipu_di] = fbi; + + /* Need dummy values until real panel is configured */ + fbi->var.xres = 640; + fbi->var.yres = 480; + fbi->var.bits_per_pixel = 16; + + mxcfbi->ipu_di_pix_fmt = interface_pix_fmt; + fb_videomode_to_var(&fbi->var, mode); + + mxcfb_check_var(&fbi->var, fbi); + + /* Default Y virtual size is 2x panel size */ + fbi->var.yres_virtual = fbi->var.yres * 2; + + mxcfb_set_fix(fbi); + + /* alocate fb first */ + if (mxcfb_map_video_memory(fbi) < 0) + return -ENOMEM; + + mxcfb_set_par(fbi); + + /* Setting panel_info for lcd */ + panel_info.cmap = NULL; + panel_info.vl_col = fbi->var.xres; + panel_info.vl_row = fbi->var.yres; + panel_info.vl_bpix = LCD_BPP; + + lcd_line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8; + + debug("MXC IPUV3 configured\n" + "XRES = %d YRES = %d BitsXpixel = %d\n", + panel_info.vl_col, + panel_info.vl_row, + panel_info.vl_bpix); + + ipu_dump_registers(); + + return 0; + +err0: + return ret; +} + +int overwrite_console(void) +{ + /* Keep stdout / stderr on serial, our LCD is for splashscreen only */ + return 1; +} + +void lcd_ctrl_init(void *lcdbase) +{ + u32 mem_len = panel_info.vl_col * + panel_info.vl_row * + NBITS(panel_info.vl_bpix) / 8; + + /* + * We rely on lcdbase being a physical address, i.e., either MMU off, + * or 1-to-1 mapping. Might want to add some virt2phys here. + */ + if (!lcdbase) + return; + + memset(lcdbase, 0, mem_len); +} + +int mx51_fb_init(struct fb_videomode *mode) +{ + int ret; + + ret = ipu_probe(); + if (ret) + puts("Error initializing IPU\n"); + + lcd_base += 56; + + debug("Framebuffer at 0x%x\n", (unsigned int)lcd_base); + ret = mxcfb_probe(IPU_PIX_FMT_RGB666, mode); + + return ret; +} diff --git a/drivers/video/mxcfb.h b/drivers/video/mxcfb.h new file mode 100644 index 0000000000..d508196603 --- /dev/null +++ b/drivers/video/mxcfb.h @@ -0,0 +1,68 @@ +/* + * Porting to u-boot: + * + * (C) Copyright 2010 + * Stefano Babic, DENX Software Engineering, sbabic@denx.de + * + * Linux IPU driver for MX51: + * + * (C) Copyright 2004-2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_MXCFB_H__ +#define __ASM_ARCH_MXCFB_H__ + +#define FB_SYNC_OE_LOW_ACT 0x80000000 +#define FB_SYNC_CLK_LAT_FALL 0x40000000 +#define FB_SYNC_DATA_INVERT 0x20000000 +#define FB_SYNC_CLK_IDLE_EN 0x10000000 +#define FB_SYNC_SHARP_MODE 0x08000000 +#define FB_SYNC_SWAP_RGB 0x04000000 + +struct mxcfb_gbl_alpha { + int enable; + int alpha; +}; + +struct mxcfb_loc_alpha { + int enable; + int alpha_in_pixel; + unsigned long alpha_phy_addr0; + unsigned long alpha_phy_addr1; +}; + +struct mxcfb_color_key { + int enable; + __u32 color_key; +}; + +struct mxcfb_pos { + __u16 x; + __u16 y; +}; + +struct mxcfb_gamma { + int enable; + int constk[16]; + int slopek[16]; +}; + +#endif diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h index 24a04ebefb..f18bc45c4d 100644 --- a/include/configs/a4m072.h +++ b/include/configs/a4m072.h @@ -147,27 +147,43 @@ #define CONFIG_PREBOOT "run try_update" #define CONFIG_EXTRA_ENV_SETTINGS \ - "bk=run add_mtd ; run add_consolespec ; bootm 200000\0" \ - "cf1=diskboot 200000 0:1\0" \ - "bootcmd_cf1=run bcf1\0" \ - "bcf=setenv bootargs root=/dev/hda3\0" \ - "bootcmd_nfs=run bnfs\0" \ - "norargs=setenv bootargs root=/dev/mtdblock3 rootfstype=cramfs\0" \ - "bootcmd_nor=cp.b ${kernel_addr} 200000 100000; run norargs addip; run bk\0" \ - "bnfs=nfs 200000 ${rootpath}/boot/uImage ; run nfsargs addip ; run bk\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0" \ - "try_update=usb start;sleep 2;usb start;sleep 1;fatload usb 0 2F0000 PCPUUPDT 2FF;usb stop;source 2F0000\0" \ - "env_addr=FE060000\0" \ - "kernel_addr=FE100000\0" \ - "rootfs_addr=FE200000\0" \ - "add_mtd=setenv bootargs ${bootargs} mtdparts=phys_mapped_flash:384k(u),640k(e),1m(k),30m(r)\0" \ - "bcf1=run cf1; run bcf; run addip; run bk\0" \ - "add_consolespec=setenv bootargs ${bootargs} console=/dev/null quiet\0" \ - "addip=if test \"${ethaddr}\" != \"00:00:00:00:00:00\" ; then if test -n ${ipaddr}; then setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off panic=1; fi ; fi\0" \ - "hostname=CPUP0\0" \ - "ethaddr=00:00:00:00:00:00\0" \ - "netdev=eth0\0" \ - "bootcmd=run bootcmd_nor\0" \ + "bk=run add_mtd ; run add_consolespec ; bootm 200000\0" \ + "cf1=diskboot 200000 0:1\0" \ + "bootcmd_cf1=run bcf1\0" \ + "bcf=setenv bootargs root=/dev/hda3\0" \ + "bootcmd_nfs=run bnfs\0" \ + "norargs=setenv bootargs root=/dev/mtdblock3 rootfstype=cramfs "\ + "panic=1\0" \ + "bootcmd_nor=cp.b ${kernel_addr} 200000 100000;" \ + "run norargs addip; run bk\0" \ + "bnfs=nfs 200000 ${rootpath}/boot/uImage;" \ + "run nfsargs addip ; run bk\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "try_update=usb start;sleep 2;usb start;sleep 1;" \ + "fatload usb 0 2F0000 PCPUUPDT 2FF;usb stop;" \ + "source 2F0000\0" \ + "env_addr=FE060000\0" \ + "kernel_addr=FE100000\0" \ + "rootfs_addr=FE200000\0" \ + "add_mtd=setenv bootargs ${bootargs} mtdparts=" \ + "phys_mapped_flash:384k(u),640k(e),1m(k),30m(r)\0" \ + "bcf1=run cf1; run bcf; run addip; run bk\0" \ + "add_consolespec=setenv bootargs ${bootargs} " \ + "console=/dev/null quiet\0" \ + "addip=if test -n ${ethaddr};" \ + "then if test -n ${ipaddr};" \ + "then setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:"\ + "${netmask}:${hostname}:${netdev}:off;" \ + "fi;" \ + "else;" \ + "setenv bootargs ${bootargs} no_ethaddr;" \ + "fi\0" \ + "hostname=CPUP0\0" \ + "ethaddr=00:00:00:00:00:00\0" \ + "netdev=eth0\0" \ + "bootcmd=run bootcmd_nor\0" \ "" /* * IPB Bus clocking configuration. @@ -212,6 +228,7 @@ #define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_CS0_START} +#define CONFIG_SYS_FLASH_BANKS_SIZES {CONFIG_SYS_CS0_SIZE} /* * Environment settings diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h index 2c18e2f7fd..6627f99ce3 100644 --- a/include/configs/sh7785lcr.h +++ b/include/configs/sh7785lcr.h @@ -62,8 +62,10 @@ /* MEMORY */ #if defined(CONFIG_SH_32BIT) -#define SH7785LCR_SDRAM_PHYS_BASE (0x48000000) -#define SH7785LCR_SDRAM_BASE (0x88000000) +/* 0x40000000 - 0x47FFFFFF does not use */ +#define CONFIG_SH_SDRAM_OFFSET (0x8000000) +#define SH7785LCR_SDRAM_PHYS_BASE (0x40000000 + CONFIG_SH_SDRAM_OFFSET) +#define SH7785LCR_SDRAM_BASE (0x80000000 + CONFIG_SH_SDRAM_OFFSET) #define SH7785LCR_SDRAM_SIZE (384 * 1024 * 1024) #define SH7785LCR_FLASH_BASE_1 (0xa0000000) #define SH7785LCR_FLASH_BANK_SIZE (64 * 1024 * 1024) diff --git a/include/configs/vision2.h b/include/configs/vision2.h index a2ecbe50d6..d2d9565247 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -211,4 +211,18 @@ #define CONFIG_SYS_NO_FLASH +/* + * Framebuffer and LCD + */ +#define CONFIG_PREBOOT +#define CONFIG_LCD +#define CONFIG_VIDEO_MX5 +#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE +#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define LCD_BPP LCD_COLOR16 +#define CONFIG_SPLASH_SCREEN +#define CONFIG_CMD_BMP +#define CONFIG_BMP_16BPP + #endif /* __CONFIG_H */ diff --git a/include/led-display.h b/include/led-display.h index 41c3744345..eaa0f40640 100644 --- a/include/led-display.h +++ b/include/led-display.h @@ -29,7 +29,6 @@ /* Display Commands */ #define DISPLAY_CLEAR 0x1 /* Clear the display */ #define DISPLAY_HOME 0x2 /* Set cursor at home position */ -#define DISPLAY_MARK 0x4 /* Enable the decimal point led, if implemented */ void display_set(int cmd); int display_putc(char c); diff --git a/include/linux/fb.h b/include/linux/fb.h new file mode 100644 index 0000000000..f4ac4bf90e --- /dev/null +++ b/include/linux/fb.h @@ -0,0 +1,616 @@ +#ifndef _LINUX_FB_H +#define _LINUX_FB_H + +#include <linux/types.h> + +/* Definitions of frame buffers */ + +#define FB_MAX 32 /* sufficient for now */ + +#define FB_TYPE_PACKED_PIXELS 0 /* Packed Pixels */ + +#define FB_VISUAL_MONO01 0 /* Monochr. 1=Black 0=White */ +#define FB_VISUAL_MONO10 1 /* Monochr. 1=White 0=Black */ +#define FB_VISUAL_TRUECOLOR 2 /* True color */ +#define FB_VISUAL_PSEUDOCOLOR 3 /* Pseudo color (like atari) */ +#define FB_VISUAL_DIRECTCOLOR 4 /* Direct color */ +#define FB_VISUAL_STATIC_PSEUDOCOLOR 5 /* Pseudo color readonly */ + +#define FB_ACCEL_NONE 0 /* no hardware accelerator */ + +struct fb_fix_screeninfo { + char id[16]; /* identification string eg "TT Builtin" */ + unsigned long smem_start; /* Start of frame buffer mem */ + /* (physical address) */ + __u32 smem_len; /* Length of frame buffer mem */ + __u32 type; /* see FB_TYPE_* */ + __u32 type_aux; /* Interleave for interleaved Planes */ + __u32 visual; /* see FB_VISUAL_* */ + __u16 xpanstep; /* zero if no hardware panning */ + __u16 ypanstep; /* zero if no hardware panning */ + __u16 ywrapstep; /* zero if no hardware ywrap */ + __u32 line_length; /* length of a line in bytes */ + unsigned long mmio_start; /* Start of Memory Mapped I/O */ + /* (physical address) */ + __u32 mmio_len; /* Length of Memory Mapped I/O */ + __u32 accel; /* Indicate to driver which */ + /* specific chip/card we have */ + __u16 reserved[3]; /* Reserved for future compatibility */ +}; + +/* + * Interpretation of offset for color fields: All offsets are from the right, + * inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you + * can use the offset as right argument to <<). A pixel afterwards is a bit + * stream and is written to video memory as that unmodified. + * + * For pseudocolor: offset and length should be the same for all color + * components. Offset specifies the position of the least significant bit + * of the pallette index in a pixel value. Length indicates the number + * of available palette entries (i.e. # of entries = 1 << length). + */ +struct fb_bitfield { + __u32 offset; /* beginning of bitfield */ + __u32 length; /* length of bitfield */ + __u32 msb_right; + +}; + +#define FB_NONSTD_HAM 1 /* Hold-And-Modify (HAM) */ +#define FB_NONSTD_REV_PIX_IN_B 2 /* order of pixels in each byte is reversed */ + +#define FB_ACTIVATE_NOW 0 /* set values immediately (or vbl)*/ +#define FB_ACTIVATE_NXTOPEN 1 /* activate on next open */ +#define FB_ACTIVATE_TEST 2 /* don't set, round up impossible */ +#define FB_ACTIVATE_MASK 15 + /* values */ +#define FB_ACTIVATE_VBL 16 /* activate values on next vbl */ +#define FB_CHANGE_CMAP_VBL 32 /* change colormap on vbl */ +#define FB_ACTIVATE_ALL 64 /* change all VCs on this fb */ +#define FB_ACTIVATE_FORCE 128 /* force apply even when no change*/ +#define FB_ACTIVATE_INV_MODE 256 /* invalidate videomode */ + +#define FB_SYNC_HOR_HIGH_ACT 1 /* horizontal sync high active */ +#define FB_SYNC_VERT_HIGH_ACT 2 /* vertical sync high active */ +#define FB_SYNC_EXT 4 /* external sync */ +#define FB_SYNC_COMP_HIGH_ACT 8 /* composite sync high active */ +#define FB_SYNC_BROADCAST 16 /* broadcast video timings */ + /* vtotal = 144d/288n/576i => PAL */ + /* vtotal = 121d/242n/484i => NTSC */ +#define FB_SYNC_ON_GREEN 32 /* sync on green */ + +#define FB_VMODE_NONINTERLACED 0 /* non interlaced */ +#define FB_VMODE_INTERLACED 1 /* interlaced */ +#define FB_VMODE_DOUBLE 2 /* double scan */ +#define FB_VMODE_ODD_FLD_FIRST 4 /* interlaced: top line first */ +#define FB_VMODE_MASK 255 + +#define FB_VMODE_YWRAP 256 /* ywrap instead of panning */ +#define FB_VMODE_SMOOTH_XPAN 512 /* smooth xpan possible (internally used) */ +#define FB_VMODE_CONUPDATE 512 /* don't update x/yoffset */ + +/* + * Display rotation support + */ +#define FB_ROTATE_UR 0 +#define FB_ROTATE_CW 1 +#define FB_ROTATE_UD 2 +#define FB_ROTATE_CCW 3 + +#define PICOS2KHZ(a) (1000000000UL/(a)) +#define KHZ2PICOS(a) (1000000000UL/(a)) + +struct fb_var_screeninfo { + __u32 xres; /* visible resolution */ + __u32 yres; + __u32 xres_virtual; /* virtual resolution */ + __u32 yres_virtual; + __u32 xoffset; /* offset from virtual to visible */ + __u32 yoffset; /* resolution */ + + __u32 bits_per_pixel; /* guess what */ + __u32 grayscale; /* != 0 Graylevels instead of colors */ + + struct fb_bitfield red; /* bitfield in fb mem if true color, */ + struct fb_bitfield green; /* else only length is significant */ + struct fb_bitfield blue; + struct fb_bitfield transp; /* transparency */ + + __u32 nonstd; /* != 0 Non standard pixel format */ + + __u32 activate; /* see FB_ACTIVATE_* */ + + __u32 height; /* height of picture in mm */ + __u32 width; /* width of picture in mm */ + + __u32 accel_flags; /* (OBSOLETE) see fb_info.flags */ + + /* Timing: All values in pixclocks, except pixclock (of course) */ + __u32 pixclock; /* pixel clock in ps (pico seconds) */ + __u32 left_margin; /* time from sync to picture */ + __u32 right_margin; /* time from picture to sync */ + __u32 upper_margin; /* time from sync to picture */ + __u32 lower_margin; + __u32 hsync_len; /* length of horizontal sync */ + __u32 vsync_len; /* length of vertical sync */ + __u32 sync; /* see FB_SYNC_* */ + __u32 vmode; /* see FB_VMODE_* */ + __u32 rotate; /* angle we rotate counter clockwise */ + __u32 reserved[5]; /* Reserved for future compatibility */ +}; + +struct fb_cmap { + __u32 start; /* First entry */ + __u32 len; /* Number of entries */ + __u16 *red; /* Red values */ + __u16 *green; + __u16 *blue; + __u16 *transp; /* transparency, can be NULL */ +}; + +struct fb_con2fbmap { + __u32 console; + __u32 framebuffer; +}; + +/* VESA Blanking Levels */ +#define VESA_NO_BLANKING 0 +#define VESA_VSYNC_SUSPEND 1 +#define VESA_HSYNC_SUSPEND 2 +#define VESA_POWERDOWN 3 + + +enum { + /* screen: unblanked, hsync: on, vsync: on */ + FB_BLANK_UNBLANK = VESA_NO_BLANKING, + + /* screen: blanked, hsync: on, vsync: on */ + FB_BLANK_NORMAL = VESA_NO_BLANKING + 1, + + /* screen: blanked, hsync: on, vsync: off */ + FB_BLANK_VSYNC_SUSPEND = VESA_VSYNC_SUSPEND + 1, + + /* screen: blanked, hsync: off, vsync: on */ + FB_BLANK_HSYNC_SUSPEND = VESA_HSYNC_SUSPEND + 1, + + /* screen: blanked, hsync: off, vsync: off */ + FB_BLANK_POWERDOWN = VESA_POWERDOWN + 1 +}; + +#define FB_VBLANK_VBLANKING 0x001 /* currently in a vertical blank */ +#define FB_VBLANK_HBLANKING 0x002 /* currently in a horizontal blank */ +#define FB_VBLANK_HAVE_VBLANK 0x004 /* vertical blanks can be detected */ +#define FB_VBLANK_HAVE_HBLANK 0x008 /* horizontal blanks can be detected */ +#define FB_VBLANK_HAVE_COUNT 0x010 /* global retrace counter is available */ +#define FB_VBLANK_HAVE_VCOUNT 0x020 /* the vcount field is valid */ +#define FB_VBLANK_HAVE_HCOUNT 0x040 /* the hcount field is valid */ +#define FB_VBLANK_VSYNCING 0x080 /* currently in a vsync */ +#define FB_VBLANK_HAVE_VSYNC 0x100 /* verical syncs can be detected */ + +struct fb_vblank { + __u32 flags; /* FB_VBLANK flags */ + __u32 count; /* counter of retraces since boot */ + __u32 vcount; /* current scanline position */ + __u32 hcount; /* current scandot position */ + __u32 reserved[4]; /* reserved for future compatibility */ +}; + +/* Internal HW accel */ +#define ROP_COPY 0 +#define ROP_XOR 1 + +struct fb_copyarea { + __u32 dx; + __u32 dy; + __u32 width; + __u32 height; + __u32 sx; + __u32 sy; +}; + +struct fb_fillrect { + __u32 dx; /* screen-relative */ + __u32 dy; + __u32 width; + __u32 height; + __u32 color; + __u32 rop; +}; + +struct fb_image { + __u32 dx; /* Where to place image */ + __u32 dy; + __u32 width; /* Size of image */ + __u32 height; + __u32 fg_color; /* Only used when a mono bitmap */ + __u32 bg_color; + __u8 depth; /* Depth of the image */ + const char *data; /* Pointer to image data */ + struct fb_cmap cmap; /* color map info */ +}; + +/* + * hardware cursor control + */ + +#define FB_CUR_SETIMAGE 0x01 +#define FB_CUR_SETPOS 0x02 +#define FB_CUR_SETHOT 0x04 +#define FB_CUR_SETCMAP 0x08 +#define FB_CUR_SETSHAPE 0x10 +#define FB_CUR_SETSIZE 0x20 +#define FB_CUR_SETALL 0xFF + +struct fbcurpos { + __u16 x, y; +}; + +struct fb_cursor { + __u16 set; /* what to set */ + __u16 enable; /* cursor on/off */ + __u16 rop; /* bitop operation */ + const char *mask; /* cursor mask bits */ + struct fbcurpos hot; /* cursor hot spot */ + struct fb_image image; /* Cursor image */ +}; + +#ifdef CONFIG_FB_BACKLIGHT +/* Settings for the generic backlight code */ +#define FB_BACKLIGHT_LEVELS 128 +#define FB_BACKLIGHT_MAX 0xFF +#endif + +#ifdef __KERNEL__ + +struct vm_area_struct; +struct fb_info; +struct device; +struct file; + +/* Definitions below are used in the parsed monitor specs */ +#define FB_DPMS_ACTIVE_OFF 1 +#define FB_DPMS_SUSPEND 2 +#define FB_DPMS_STANDBY 4 + +#define FB_DISP_DDI 1 +#define FB_DISP_ANA_700_300 2 +#define FB_DISP_ANA_714_286 4 +#define FB_DISP_ANA_1000_400 8 +#define FB_DISP_ANA_700_000 16 + +#define FB_DISP_MONO 32 +#define FB_DISP_RGB 64 +#define FB_DISP_MULTI 128 +#define FB_DISP_UNKNOWN 256 + +#define FB_SIGNAL_NONE 0 +#define FB_SIGNAL_BLANK_BLANK 1 +#define FB_SIGNAL_SEPARATE 2 +#define FB_SIGNAL_COMPOSITE 4 +#define FB_SIGNAL_SYNC_ON_GREEN 8 +#define FB_SIGNAL_SERRATION_ON 16 + +#define FB_MISC_PRIM_COLOR 1 +#define FB_MISC_1ST_DETAIL 2 /* First Detailed Timing is preferred */ +struct fb_chroma { + __u32 redx; /* in fraction of 1024 */ + __u32 greenx; + __u32 bluex; + __u32 whitex; + __u32 redy; + __u32 greeny; + __u32 bluey; + __u32 whitey; +}; + +struct fb_monspecs { + struct fb_chroma chroma; + struct fb_videomode *modedb; /* mode database */ + __u8 manufacturer[4]; /* Manufacturer */ + __u8 monitor[14]; /* Monitor String */ + __u8 serial_no[14]; /* Serial Number */ + __u8 ascii[14]; /* ? */ + __u32 modedb_len; /* mode database length */ + __u32 model; /* Monitor Model */ + __u32 serial; /* Serial Number - Integer */ + __u32 year; /* Year manufactured */ + __u32 week; /* Week Manufactured */ + __u32 hfmin; /* hfreq lower limit (Hz) */ + __u32 hfmax; /* hfreq upper limit (Hz) */ + __u32 dclkmin; /* pixelclock lower limit (Hz) */ + __u32 dclkmax; /* pixelclock upper limit (Hz) */ + __u16 input; /* display type - see FB_DISP_* */ + __u16 dpms; /* DPMS support - see FB_DPMS_ */ + __u16 signal; /* Signal Type - see FB_SIGNAL_* */ + __u16 vfmin; /* vfreq lower limit (Hz) */ + __u16 vfmax; /* vfreq upper limit (Hz) */ + __u16 gamma; /* Gamma - in fractions of 100 */ + __u16 gtf : 1; /* supports GTF */ + __u16 misc; /* Misc flags - see FB_MISC_* */ + __u8 version; /* EDID version... */ + __u8 revision; /* ...and revision */ + __u8 max_x; /* Maximum horizontal size (cm) */ + __u8 max_y; /* Maximum vertical size (cm) */ +}; + +struct fb_cmap_user { + __u32 start; /* First entry */ + __u32 len; /* Number of entries */ + __u16 *red; /* Red values */ + __u16 *green; + __u16 *blue; + __u16 *transp; /* transparency, can be NULL */ +}; + +struct fb_image_user { + __u32 dx; /* Where to place image */ + __u32 dy; + __u32 width; /* Size of image */ + __u32 height; + __u32 fg_color; /* Only used when a mono bitmap */ + __u32 bg_color; + __u8 depth; /* Depth of the image */ + const char *data; /* Pointer to image data */ + struct fb_cmap_user cmap; /* color map info */ +}; + +struct fb_cursor_user { + __u16 set; /* what to set */ + __u16 enable; /* cursor on/off */ + __u16 rop; /* bitop operation */ + const char *mask; /* cursor mask bits */ + struct fbcurpos hot; /* cursor hot spot */ + struct fb_image_user image; /* Cursor image */ +}; + +/* + * Register/unregister for framebuffer events + */ + +/* The resolution of the passed in fb_info about to change */ +#define FB_EVENT_MODE_CHANGE 0x01 +/* The display on this fb_info is beeing suspended, no access to the + * framebuffer is allowed any more after that call returns + */ +#define FB_EVENT_SUSPEND 0x02 +/* The display on this fb_info was resumed, you can restore the display + * if you own it + */ +#define FB_EVENT_RESUME 0x03 +/* An entry from the modelist was removed */ +#define FB_EVENT_MODE_DELETE 0x04 +/* A driver registered itself */ +#define FB_EVENT_FB_REGISTERED 0x05 +/* A driver unregistered itself */ +#define FB_EVENT_FB_UNREGISTERED 0x06 +/* CONSOLE-SPECIFIC: get console to framebuffer mapping */ +#define FB_EVENT_GET_CONSOLE_MAP 0x07 +/* CONSOLE-SPECIFIC: set console to framebuffer mapping */ +#define FB_EVENT_SET_CONSOLE_MAP 0x08 +/* A hardware display blank change occured */ +#define FB_EVENT_BLANK 0x09 +/* Private modelist is to be replaced */ +#define FB_EVENT_NEW_MODELIST 0x0A +/* The resolution of the passed in fb_info about to change and + all vc's should be changed */ +#define FB_EVENT_MODE_CHANGE_ALL 0x0B +/* A software display blank change occured */ +#define FB_EVENT_CONBLANK 0x0C +/* Get drawing requirements */ +#define FB_EVENT_GET_REQ 0x0D +/* Unbind from the console if possible */ +#define FB_EVENT_FB_UNBIND 0x0E + +struct fb_event { + struct fb_info *info; + void *data; +}; + +struct fb_blit_caps { + u32 x; + u32 y; + u32 len; + u32 flags; +}; + +/* + * Pixmap structure definition + * + * The purpose of this structure is to translate data + * from the hardware independent format of fbdev to what + * format the hardware needs. + */ + +#define FB_PIXMAP_DEFAULT 1 /* used internally by fbcon */ +#define FB_PIXMAP_SYSTEM 2 /* memory is in system RAM */ +#define FB_PIXMAP_IO 4 /* memory is iomapped */ +#define FB_PIXMAP_SYNC 256 /* set if GPU can DMA */ + +struct fb_pixmap { + u8 *addr; /* pointer to memory */ + u32 size; /* size of buffer in bytes */ + u32 offset; /* current offset to buffer */ + u32 buf_align; /* byte alignment of each bitmap */ + u32 scan_align; /* alignment per scanline */ + u32 access_align; /* alignment per read/write (bits) */ + u32 flags; /* see FB_PIXMAP_* */ + u32 blit_x; /* supported bit block dimensions (1-32)*/ + u32 blit_y; /* Format: blit_x = 1 << (width - 1) */ + /* blit_y = 1 << (height - 1) */ + /* if 0, will be set to 0xffffffff (all)*/ + /* access methods */ + void (*writeio)(struct fb_info *info, void *dst, void *src, unsigned int size); + void (*readio) (struct fb_info *info, void *dst, void *src, unsigned int size); +}; + +#ifdef CONFIG_FB_DEFERRED_IO +struct fb_deferred_io { + /* delay between mkwrite and deferred handler */ + unsigned long delay; + struct mutex lock; /* mutex that protects the page list */ + struct list_head pagelist; /* list of touched pages */ + /* callback */ + void (*deferred_io)(struct fb_info *info, struct list_head *pagelist); +}; +#endif + +/* FBINFO_* = fb_info.flags bit flags */ +#define FBINFO_MODULE 0x0001 /* Low-level driver is a module */ +#define FBINFO_HWACCEL_DISABLED 0x0002 + /* When FBINFO_HWACCEL_DISABLED is set: + * Hardware acceleration is turned off. Software implementations + * of required functions (copyarea(), fillrect(), and imageblit()) + * takes over; acceleration engine should be in a quiescent state */ + +/* hints */ +#define FBINFO_PARTIAL_PAN_OK 0x0040 /* otw use pan only for double-buffering */ +#define FBINFO_READS_FAST 0x0080 /* soft-copy faster than rendering */ + +/* + * A driver may set this flag to indicate that it does want a set_par to be + * called every time when fbcon_switch is executed. The advantage is that with + * this flag set you can really be sure that set_par is always called before + * any of the functions dependant on the correct hardware state or altering + * that state, even if you are using some broken X releases. The disadvantage + * is that it introduces unwanted delays to every console switch if set_par + * is slow. It is a good idea to try this flag in the drivers initialization + * code whenever there is a bug report related to switching between X and the + * framebuffer console. + */ +#define FBINFO_MISC_ALWAYS_SETPAR 0x40000 + +/* + * Host and GPU endianness differ. + */ +#define FBINFO_FOREIGN_ENDIAN 0x100000 +/* + * Big endian math. This is the same flags as above, but with different + * meaning, it is set by the fb subsystem depending FOREIGN_ENDIAN flag + * and host endianness. Drivers should not use this flag. + */ +#define FBINFO_BE_MATH 0x100000 + +struct fb_info { + int node; + int flags; + struct fb_var_screeninfo var; /* Current var */ + struct fb_fix_screeninfo fix; /* Current fix */ + struct fb_monspecs monspecs; /* Current Monitor specs */ + struct fb_pixmap pixmap; /* Image hardware mapper */ + struct fb_pixmap sprite; /* Cursor hardware mapper */ + struct fb_cmap cmap; /* Current cmap */ + struct list_head modelist; /* mode list */ + struct fb_videomode *mode; /* current mode */ + + char *screen_base; /* Virtual address */ + unsigned long screen_size; /* Amount of ioremapped VRAM or 0 */ + void *pseudo_palette; /* Fake palette of 16 colors */ +#define FBINFO_STATE_RUNNING 0 +#define FBINFO_STATE_SUSPENDED 1 + u32 state; /* Hardware state i.e suspend */ + void *fbcon_par; /* fbcon use-only private area */ + /* From here on everything is device dependent */ + void *par; +}; + +#define FBINFO_DEFAULT 0 + +#define FBINFO_FLAG_MODULE FBINFO_MODULE +#define FBINFO_FLAG_DEFAULT FBINFO_DEFAULT + +// This will go away +#if defined(__sparc__) + +/* We map all of our framebuffers such that big-endian accesses + * are what we want, so the following is sufficient. + */ + +// This will go away +#define fb_readb sbus_readb +#define fb_readw sbus_readw +#define fb_readl sbus_readl +#define fb_readq sbus_readq +#define fb_writeb sbus_writeb +#define fb_writew sbus_writew +#define fb_writel sbus_writel +#define fb_writeq sbus_writeq +#define fb_memset sbus_memset_io + +#elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || defined(__sh__) || defined(__powerpc__) || defined(__avr32__) || defined(__bfin__) + +#define fb_readb __raw_readb +#define fb_readw __raw_readw +#define fb_readl __raw_readl +#define fb_readq __raw_readq +#define fb_writeb __raw_writeb +#define fb_writew __raw_writew +#define fb_writel __raw_writel +#define fb_writeq __raw_writeq +#define fb_memset memset_io + +#else + +#define fb_readb(addr) (*(volatile u8 *) (addr)) +#define fb_readw(addr) (*(volatile u16 *) (addr)) +#define fb_readl(addr) (*(volatile u32 *) (addr)) +#define fb_readq(addr) (*(volatile u64 *) (addr)) +#define fb_writeb(b,addr) (*(volatile u8 *) (addr) = (b)) +#define fb_writew(b,addr) (*(volatile u16 *) (addr) = (b)) +#define fb_writel(b,addr) (*(volatile u32 *) (addr) = (b)) +#define fb_writeq(b,addr) (*(volatile u64 *) (addr) = (b)) +#define fb_memset memset + +#endif + +#define FB_LEFT_POS(p, bpp) (fb_be_math(p) ? (32 - (bpp)) : 0) +#define FB_SHIFT_HIGH(p, val, bits) (fb_be_math(p) ? (val) >> (bits) : \ + (val) << (bits)) +#define FB_SHIFT_LOW(p, val, bits) (fb_be_math(p) ? (val) << (bits) : \ + (val) >> (bits)) +/* drivers/video/fbmon.c */ +#define FB_MAXTIMINGS 0 +#define FB_VSYNCTIMINGS 1 +#define FB_HSYNCTIMINGS 2 +#define FB_DCLKTIMINGS 3 +#define FB_IGNOREMON 0x100 + +#define FB_MODE_IS_UNKNOWN 0 +#define FB_MODE_IS_DETAILED 1 +#define FB_MODE_IS_STANDARD 2 +#define FB_MODE_IS_VESA 4 +#define FB_MODE_IS_CALCULATED 8 +#define FB_MODE_IS_FIRST 16 +#define FB_MODE_IS_FROM_VAR 32 + + +/* drivers/video/fbcmap.c */ + +extern int fb_alloc_cmap(struct fb_cmap *cmap, int len, int transp); +extern void fb_dealloc_cmap(struct fb_cmap *cmap); +extern int fb_copy_cmap(const struct fb_cmap *from, struct fb_cmap *to); +extern int fb_cmap_to_user(const struct fb_cmap *from, struct fb_cmap_user *to); +extern int fb_set_cmap(struct fb_cmap *cmap, struct fb_info *fb_info); +extern int fb_set_user_cmap(struct fb_cmap_user *cmap, struct fb_info *fb_info); +extern const struct fb_cmap *fb_default_cmap(int len); +extern void fb_invert_cmaps(void); + +struct fb_videomode { + const char *name; /* optional */ + u32 refresh; /* optional */ + u32 xres; + u32 yres; + u32 pixclock; + u32 left_margin; + u32 right_margin; + u32 upper_margin; + u32 lower_margin; + u32 hsync_len; + u32 vsync_len; + u32 sync; + u32 vmode; + u32 flag; +}; + +#endif /* __KERNEL__ */ + +#endif /* _LINUX_FB_H */ |
