diff options
| -rw-r--r-- | Makefile | 5 | ||||
| -rw-r--r-- | doc/README.x86 | 10 |
2 files changed, 9 insertions, 6 deletions
@@ -729,8 +729,9 @@ ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%) endif ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf -# We can't do this yet due to the need for binary blobs -# ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom +ifneq ($(BUILD_ROM),) +ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom +endif # enable combined SPL/u-boot/dtb rules for tegra ifneq ($(CONFIG_TEGRA),) diff --git a/doc/README.x86 b/doc/README.x86 index 7df8cc516a..ddfd75e1cd 100644 --- a/doc/README.x86 +++ b/doc/README.x86 @@ -51,9 +51,11 @@ Building ROM version of U-Boot (hereafter referred to as u-boot.rom) is a little bit tricky, as generally it requires several binary blobs which are not shipped in the U-Boot source tree. Due to this reason, the u-boot.rom build is not turned on by default in the U-Boot source tree. Firstly, you need turn it -on by uncommenting the following line in the main U-Boot Makefile: +on by enabling the ROM build: -# ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom +$ export BUILD_ROM=y + +This tells the Makefile to build u-boot.rom as a target. Link-specific instructions: @@ -126,11 +128,11 @@ Make sure 0x1110000 matches CONFIG_SYS_TEXT_BASE and 0x1110015 matches the symbol address of _start (in arch/x86/cpu/start.S). If you want to use ELF as the coreboot payload, change U-Boot configuration to -use CONFIG_OF_EMBED. +use CONFIG_OF_EMBED instead of CONFIG_OF_SEPARATE. CPU Microcode ------------- -Modern CPU usually requires a special bit stream called microcode [5] to be +Modern CPUs usually require a special bit stream called microcode [5] to be loaded on the processor after power up in order to function properly. U-Boot has already integrated these as hex dumps in the source tree. |
