diff options
46 files changed, 1207 insertions, 109 deletions
diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c index 2be192d578..e5ecf5dae5 100644 --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -24,6 +24,109 @@ #include <command.h> #include <linux/compiler.h> #include <asm/processor.h> +#include "fsl_corenet_serdes.h" + +#ifdef CONFIG_SYS_FSL_ERRATUM_A004849 +/* + * This work-around is implemented in PBI, so just check to see if the + * work-around was actually applied. To do this, we check for specific data + * at specific addresses in DCSR. + * + * Array offsets[] contains a list of offsets within DCSR. According to the + * erratum document, the value at each offset should be 2. + */ +static void check_erratum_a4849(uint32_t svr) +{ + void __iomem *dcsr = (void *)CONFIG_SYS_DCSRBAR + 0xb0000; + unsigned int i; + +#if defined(CONFIG_PPC_P2041) || defined(CONFIG_PPC_P3041) + static const uint8_t offsets[] = { + 0x50, 0x54, 0x58, 0x90, 0x94, 0x98 + }; +#endif +#ifdef CONFIG_PPC_P4080 + static const uint8_t offsets[] = { + 0x60, 0x64, 0x68, 0x6c, 0xa0, 0xa4, 0xa8, 0xac + }; +#endif + uint32_t x108; /* The value that should be at offset 0x108 */ + + for (i = 0; i < ARRAY_SIZE(offsets); i++) { + if (in_be32(dcsr + offsets[i]) != 2) { + printf("Work-around for Erratum A004849 is not enabled\n"); + return; + } + } + +#if defined(CONFIG_PPC_P2041) || defined(CONFIG_PPC_P3041) + x108 = 0x12; +#endif + +#ifdef CONFIG_PPC_P4080 + /* + * For P4080, the erratum document says that the value at offset 0x108 + * should be 0x12 on rev2, or 0x1c on rev3. + */ + if (SVR_MAJ(svr) == 2) + x108 = 0x12; + if (SVR_MAJ(svr) == 3) + x108 = 0x1c; +#endif + + if (in_be32(dcsr + 0x108) != x108) { + printf("Work-around for Erratum A004849 is not enabled\n"); + return; + } + + /* Everything matches, so the erratum work-around was applied */ + + printf("Work-around for Erratum A004849 enabled\n"); +} +#endif + +#ifdef CONFIG_SYS_FSL_ERRATUM_A004580 +/* + * This work-around is implemented in PBI, so just check to see if the + * work-around was actually applied. To do this, we check for specific data + * at specific addresses in the SerDes register block. + * + * The work-around says that for each SerDes lane, write BnTTLCRy0 = + * 0x1B00_0001, Register 2 = 0x0088_0000, and Register 3 = 0x4000_0000. + + */ +static void check_erratum_a4580(uint32_t svr) +{ + const serdes_corenet_t __iomem *srds_regs = + (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; + unsigned int lane; + + for (lane = 0; lane < SRDS_MAX_LANES; lane++) { + if (serdes_lane_enabled(lane)) { + const struct serdes_lane __iomem *srds_lane = + &srds_regs->lane[serdes_get_lane_idx(lane)]; + + /* + * Verify that the values we were supposed to write in + * the PBI are actually there. Also, the lower 15 + * bits of res4[3] should be the same as the upper 15 + * bits of res4[1]. + */ + if ((in_be32(&srds_lane->ttlcr0) != 0x1b000001) || + (in_be32(&srds_lane->res4[1]) != 0x880000) || + (in_be32(&srds_lane->res4[3]) != 0x40000044)) { + printf("Work-around for Erratum A004580 is " + "not enabled\n"); + return; + } + } + } + + /* Everything matches, so the erratum work-around was applied */ + + printf("Work-around for Erratum A004580 enabled\n"); +} +#endif static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { @@ -137,6 +240,17 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #ifdef CONFIG_SYS_FSL_ERRATUM_A_004934 puts("Work-around for Erratum A004934 enabled\n"); #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A004849 + /* This work-around is implemented in PBI, so just check for it */ + check_erratum_a4849(svr); +#endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A004580 + /* This work-around is implemented in PBI, so just check for it */ + check_erratum_a4580(svr); +#endif +#ifdef CONFIG_SYS_P4080_ERRATUM_PCIE_A003 + puts("Work-around for Erratum PCIe-A003 enabled\n"); +#endif return 0; } diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index 78486aab85..9b9832cfc3 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -451,21 +451,21 @@ static void dump_spd_ddr_reg(void) for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { switch (i) { case 0: - ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR; + ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR; break; -#if defined(CONFIG_SYS_MPC85xx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1) +#if defined(CONFIG_SYS_MPC8xxx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1) case 1: - ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR2_ADDR; + ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR; break; #endif -#if defined(CONFIG_SYS_MPC85xx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2) +#if defined(CONFIG_SYS_MPC8xxx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2) case 2: - ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR3_ADDR; + ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR3_ADDR; break; #endif -#if defined(CONFIG_SYS_MPC85xx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3) +#if defined(CONFIG_SYS_MPC8xxx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3) case 3: - ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR4_ADDR; + ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR4_ADDR; break; #endif default: diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 705c16c558..d1155e8126 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -350,6 +350,10 @@ int cpu_init_r(void) #elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) struct ccsr_cluster_l2 * l2cache = (void __iomem *)CONFIG_SYS_FSL_CLUSTER_1_L2; #endif +#if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP) + extern int spin_table_compat; + const char *spin; +#endif #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \ defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011) @@ -395,6 +399,14 @@ int cpu_init_r(void) } #endif +#if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP) + spin = getenv("spin_table_compat"); + if (spin && (*spin == 'n')) + spin_table_compat = 0; + else + spin_table_compat = 1; +#endif + puts ("L2: "); #if defined(CONFIG_L2_CACHE) diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen1.c b/arch/powerpc/cpu/mpc85xx/ddr-gen1.c index 54437dd0cb..8a86819fb5 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen1.c +++ b/arch/powerpc/cpu/mpc85xx/ddr-gen1.c @@ -18,7 +18,7 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, unsigned int ctrl_num) { unsigned int i; - volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR; + volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR; if (ctrl_num != 0) { printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); @@ -73,7 +73,7 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, void ddr_enable_ecc(unsigned int dram_size) { - volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); + volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR); dma_meminit(CONFIG_MEM_INIT_VALUE, dram_size); diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c b/arch/powerpc/cpu/mpc85xx/ddr-gen2.c index 49000a19e8..a705862522 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c +++ b/arch/powerpc/cpu/mpc85xx/ddr-gen2.c @@ -19,15 +19,12 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, unsigned int ctrl_num) { unsigned int i; -#ifdef CONFIG_MPC83xx - ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC83xx_DDR_ADDR; -#else - ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR; -#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_DDR120 + ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + +#if defined(CONFIG_SYS_FSL_ERRATUM_NMG_DDR120) && defined(CONFIG_MPC85xx) ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); uint svr; #endif -#endif if (ctrl_num) { printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c index f118dd5daf..ef0dd1da64 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c +++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c @@ -32,21 +32,21 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, switch (ctrl_num) { case 0: - ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR; + ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR; break; -#if defined(CONFIG_SYS_MPC85xx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1) +#if defined(CONFIG_SYS_MPC8xxx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1) case 1: - ddr = (void *)CONFIG_SYS_MPC85xx_DDR2_ADDR; + ddr = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR; break; #endif -#if defined(CONFIG_SYS_MPC85xx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2) +#if defined(CONFIG_SYS_MPC8xxx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2) case 2: - ddr = (void *)CONFIG_SYS_MPC85xx_DDR3_ADDR; + ddr = (void *)CONFIG_SYS_MPC8xxx_DDR3_ADDR; break; #endif -#if defined(CONFIG_SYS_MPC85xx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3) +#if defined(CONFIG_SYS_MPC8xxx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3) case 3: - ddr = (void *)CONFIG_SYS_MPC85xx_DDR4_ADDR; + ddr = (void *)CONFIG_SYS_MPC8xxx_DDR4_ADDR; break; #endif default: diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c index 7f466ac6a9..5495dc59ee 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c @@ -714,9 +714,13 @@ void fsl_serdes_init(void) #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES9 /* - * Set BnTTLCRy0[FLT_SEL] = 000011 and set BnTTLCRy0[17] = 1 for - * each of the SerDes lanes selected as SGMII, XAUI, SRIO, or - * AURORA before the device is initialized. + * Set BnTTLCRy0[FLT_SEL] = 011011 and set BnTTLCRy0[31] = 1 + * for each of the SerDes lanes selected as SGMII, XAUI, SRIO, + * or AURORA before the device is initialized. + * + * Note that this part of the SERDES-9 work-around is + * redundant if the work-around for A-4580 has already been + * applied via PBI. */ switch (lane_prtcl) { case SGMII_FM1_DTSEC1: @@ -733,10 +737,12 @@ void fsl_serdes_init(void) case SRIO1: case SRIO2: case AURORA: - clrsetbits_be32(&srds_regs->lane[idx].ttlcr0, - SRDS_TTLCR0_FLT_SEL_MASK, - SRDS_TTLCR0_FLT_SEL_750PPM | - SRDS_TTLCR0_PM_DIS); + out_be32(&srds_regs->lane[idx].ttlcr0, + SRDS_TTLCR0_FLT_SEL_KFR_26 | + SRDS_TTLCR0_FLT_SEL_KPH_28 | + SRDS_TTLCR0_FLT_SEL_750PPM | + SRDS_TTLCR0_FREQOVD_EN); + break; default: break; } diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S index 4ba44a9028..1f76925dc1 100644 --- a/arch/powerpc/cpu/mpc85xx/release.S +++ b/arch/powerpc/cpu/mpc85xx/release.S @@ -351,6 +351,13 @@ __secondary_reset_vector: .align L1_CACHE_SHIFT .global __second_half_boot_page __second_half_boot_page: +#ifdef CONFIG_PPC_SPINTABLE_COMPATIBLE + lis r3,(spin_table_compat - __second_half_boot_page)@h + ori r3,r3,(spin_table_compat - __second_half_boot_page)@l + add r3,r3,r11 /* r11 has the address of __second_half_boot_page */ + lwz r14,0(r3) +#endif + #define EPAPR_MAGIC 0x45504150 #define ENTRY_ADDR_UPPER 0 #define ENTRY_ADDR_LOWER 4 @@ -383,7 +390,24 @@ __second_half_boot_page: stw r8,ENTRY_ADDR_LOWER(r10) /* spin waiting for addr */ -3: lwz r4,ENTRY_ADDR_LOWER(r10) +3: +/* + * To comply with ePAPR 1.1, the spin table has been moved to cache-enabled + * memory. Old OS may not work with this change. A patch is waiting to be + * accepted for Linux kernel. Other OS needs similar fix to spin table. + * For OSes with old spin table code, we can enable this temporary fix by + * setting environmental variable "spin_table_compat". For new OSes, set + * "spin_table_compat=no". After Linux is fixed, we can remove this macro + * and related code. For now, it is enabled by default. + */ +#ifdef CONFIG_PPC_SPINTABLE_COMPATIBLE + cmpwi r14,0 + beq 4f + dcbf 0, r10 + sync +4: +#endif + lwz r4,ENTRY_ADDR_LOWER(r10) andi. r11,r4,1 bne 3b isync @@ -460,5 +484,14 @@ __second_half_boot_page: .globl __spin_table __spin_table: .space CONFIG_MAX_CPUS*ENTRY_SIZE + +#ifdef CONFIG_PPC_SPINTABLE_COMPATIBLE + .align L1_CACHE_SHIFT + .global spin_table_compat +spin_table_compat: + .long 1 + +#endif + __spin_table_end: .space 4096 - (__spin_table_end - __spin_table) diff --git a/arch/powerpc/cpu/mpc86xx/ddr-8641.c b/arch/powerpc/cpu/mpc86xx/ddr-8641.c index b8f2c9387f..92ba26dc8e 100644 --- a/arch/powerpc/cpu/mpc86xx/ddr-8641.c +++ b/arch/powerpc/cpu/mpc86xx/ddr-8641.c @@ -22,10 +22,10 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, switch (ctrl_num) { case 0: - ddr = (void *)CONFIG_SYS_MPC86xx_DDR_ADDR; + ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR; break; case 1: - ddr = (void *)CONFIG_SYS_MPC86xx_DDR2_ADDR; + ddr = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR; break; default: printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c index 088cc0e855..8016bcdc22 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c @@ -18,15 +18,7 @@ #include "ddr.h" -#ifdef CONFIG_MPC83xx - #define _DDR_ADDR CONFIG_SYS_MPC83xx_DDR_ADDR -#elif defined(CONFIG_MPC85xx) - #define _DDR_ADDR CONFIG_SYS_MPC85xx_DDR_ADDR -#elif defined(CONFIG_MPC86xx) - #define _DDR_ADDR CONFIG_SYS_MPC86xx_DDR_ADDR -#else - #error "Undefined _DDR_ADDR" -#endif +#define _DDR_ADDR CONFIG_SYS_MPC8xxx_DDR_ADDR static u32 fsl_ddr_get_version(void) { diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/util.c b/arch/powerpc/cpu/mpc8xxx/ddr/util.c index 940ffff773..acfe1f095f 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/util.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/util.c @@ -133,14 +133,8 @@ u32 fsl_ddr_get_intl3r(void) void board_add_ram_info(int use_default) { -#if defined(CONFIG_MPC83xx) - immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - ccsr_ddr_t *ddr = (void *)&immap->ddr; -#elif defined(CONFIG_MPC85xx) - ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); -#elif defined(CONFIG_MPC86xx) - ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC86xx_DDR_ADDR); -#endif + ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR); + #if defined(CONFIG_E6500) && (CONFIG_NUM_DDR_CONTROLLERS == 3) u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004); #endif @@ -152,13 +146,13 @@ void board_add_ram_info(int use_default) #if CONFIG_NUM_DDR_CONTROLLERS >= 2 if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) { - ddr = (void __iomem *)CONFIG_SYS_MPC85xx_DDR2_ADDR; + ddr = (void __iomem *)CONFIG_SYS_MPC8xxx_DDR2_ADDR; sdram_cfg = in_be32(&ddr->sdram_cfg); } #endif #if CONFIG_NUM_DDR_CONTROLLERS >= 3 if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) { - ddr = (void __iomem *)CONFIG_SYS_MPC85xx_DDR3_ADDR; + ddr = (void __iomem *)CONFIG_SYS_MPC8xxx_DDR3_ADDR; sdram_cfg = in_be32(&ddr->sdram_cfg); } #endif diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c index 68db8e2448..1986fea030 100644 --- a/arch/powerpc/cpu/mpc8xxx/fdt.c +++ b/arch/powerpc/cpu/mpc8xxx/fdt.c @@ -217,7 +217,7 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) #if CONFIG_SYS_FSL_SEC_COMPAT == 2 /* SEC 2.x/3.x */ void fdt_fixup_crypto_node(void *blob, int sec_rev) { - const struct sec_rev_prop { + static const struct sec_rev_prop { u32 sec_rev; u32 num_channels; u32 channel_fifo_len; @@ -232,8 +232,8 @@ void fdt_fixup_crypto_node(void *blob, int sec_rev) { 0x0301, 4, 24, 0xbfe, 0x03ab0ebf }, /* SEC 3.1 */ { 0x0303, 4, 24, 0x97c, 0x03a30abf }, /* SEC 3.3 */ }; - char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) * - sizeof("fsl,secX.Y")]; + static char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) * + sizeof("fsl,secX.Y")]; int crypto_node, sec_idx, err; char *p; u32 val; diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 03baaee1b7..0b9638bcee 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -27,6 +27,12 @@ #error "Do not define CONFIG_SYS_CCSRBAR_DEFAULT in the board header file." #endif +/* + * This macro should be removed when we no longer care about backwards + * compatibility with older operating systems. + */ +#define CONFIG_PPC_SPINTABLE_COMPATIBLE + #define FSL_DDR_VER_4_7 47 /* Number of TLB CAM entries we have on FSL Book-E chips */ @@ -131,7 +137,6 @@ #define CONFIG_SYS_PPC_E500_DEBUG_TLB 3 #define CONFIG_TSECV2 #define CONFIG_SYS_FSL_SEC_COMPAT 4 -#define CONFIG_FSL_SATA_V2 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_NUM_DDR_CONTROLLERS 1 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 @@ -175,7 +180,6 @@ #define CONFIG_SYS_PPC_E500_DEBUG_TLB 2 #define CONFIG_TSECV2 #define CONFIG_SYS_FSL_SEC_COMPAT 2 -#define CONFIG_FSL_SATA_V2 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 @@ -188,7 +192,6 @@ #define CONFIG_SYS_PPC_E500_DEBUG_TLB 3 #define CONFIG_TSECV2 #define CONFIG_SYS_FSL_SEC_COMPAT 4 -#define CONFIG_FSL_SATA_V2 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_NUM_DDR_CONTROLLERS 1 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 @@ -242,7 +245,6 @@ #define CONFIG_SYS_PPC_E500_DEBUG_TLB 2 #define CONFIG_TSECV2 #define CONFIG_SYS_FSL_SEC_COMPAT 2 -#define CONFIG_FSL_SATA_V2 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 @@ -318,7 +320,6 @@ #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 #define CONFIG_SYS_FSL_SEC_COMPAT 4 -#define CONFIG_FSL_SATA_V2 #define CONFIG_SYS_NUM_FMAN 1 #define CONFIG_SYS_NUM_FM1_DTSEC 5 #define CONFIG_SYS_NUM_FM1_10GEC 1 @@ -343,6 +344,7 @@ #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2 0x11 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 +#define CONFIG_SYS_FSL_ERRATUM_A004849 #elif defined(CONFIG_PPC_P3041) #define CONFIG_SYS_FSL_QORIQ_CHASSIS1 @@ -350,7 +352,6 @@ #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 #define CONFIG_SYS_FSL_SEC_COMPAT 4 -#define CONFIG_FSL_SATA_V2 #define CONFIG_SYS_NUM_FMAN 1 #define CONFIG_SYS_NUM_FM1_DTSEC 5 #define CONFIG_SYS_NUM_FM1_10GEC 1 @@ -375,6 +376,7 @@ #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2 0x11 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 +#define CONFIG_SYS_FSL_ERRATUM_A004849 #elif defined(CONFIG_PPC_P4080) /* also supports P4040 */ #define CONFIG_SYS_FSL_QORIQ_CHASSIS1 @@ -417,6 +419,9 @@ #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x20 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xff000000 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 +#define CONFIG_SYS_FSL_ERRATUM_A004849 +#define CONFIG_SYS_FSL_ERRATUM_A004580 +#define CONFIG_SYS_P4080_ERRATUM_PCIE_A003 #elif defined(CONFIG_PPC_P5020) /* also supports P5010 */ #define CONFIG_SYS_PPC64 /* 64-bit core */ @@ -425,7 +430,6 @@ #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 #define CONFIG_SYS_FSL_SEC_COMPAT 4 -#define CONFIG_FSL_SATA_V2 #define CONFIG_SYS_NUM_FMAN 1 #define CONFIG_SYS_NUM_FM1_DTSEC 5 #define CONFIG_SYS_NUM_FM1_10GEC 1 @@ -449,6 +453,7 @@ #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 #elif defined(CONFIG_PPC_P5040) +#define CONFIG_SYS_PPC64 #define CONFIG_SYS_FSL_QORIQ_CHASSIS1 #define CONFIG_MAX_CPUS 4 #define CONFIG_SYS_FSL_NUM_CC_PLLS 3 @@ -472,7 +477,6 @@ #define CONFIG_SYS_FSL_ERRATUM_DDR_A003 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003474 #define CONFIG_SYS_FSL_ERRATUM_A004699 -#define CONFIG_SYS_FSL_ELBC_MULTIBIT_ECC #define CONFIG_SYS_FSL_ERRATUM_A004510 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000 diff --git a/arch/powerpc/include/asm/immap_83xx.h b/arch/powerpc/include/asm/immap_83xx.h index 679832cd6c..8ac13fc05c 100644 --- a/arch/powerpc/include/asm/immap_83xx.h +++ b/arch/powerpc/include/asm/immap_83xx.h @@ -1035,9 +1035,9 @@ typedef struct immap { } immap_t; #endif -#define CONFIG_SYS_MPC83xx_DDR_OFFSET (0x2000) -#define CONFIG_SYS_MPC83xx_DDR_ADDR \ - (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_DDR_OFFSET) +#define CONFIG_SYS_MPC8xxx_DDR_OFFSET (0x2000) +#define CONFIG_SYS_MPC8xxx_DDR_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR_OFFSET) #define CONFIG_SYS_MPC83xx_DMA_OFFSET (0x8000) #define CONFIG_SYS_MPC83xx_DMA_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_DMA_OFFSET) diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 969f726c36..296b549779 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -2619,7 +2619,7 @@ typedef struct serdes_corenet { #define SRDS_PCCR2_RST_XGMII1 0x00800000 #define SRDS_PCCR2_RST_XGMII2 0x00400000 u32 res5[197]; - struct { + struct serdes_lane { u32 gcr0; /* General Control Register 0 */ #define SRDS_GCR0_RRST 0x00400000 #define SRDS_GCR0_1STLANE 0x00010000 @@ -2637,8 +2637,11 @@ typedef struct serdes_corenet { u32 res3; u32 ttlcr0; /* Transition Tracking Loop Ctrl 0 */ #define SRDS_TTLCR0_FLT_SEL_MASK 0x3f000000 +#define SRDS_TTLCR0_FLT_SEL_KFR_26 0x10000000 +#define SRDS_TTLCR0_FLT_SEL_KPH_28 0x08000000 #define SRDS_TTLCR0_FLT_SEL_750PPM 0x03000000 #define SRDS_TTLCR0_PM_DIS 0x00004000 +#define SRDS_TTLCR0_FREQOVD_EN 0x00000001 u32 res4[7]; } lane[24]; u32 res6[384]; @@ -2867,9 +2870,9 @@ struct ccsr_pman { #define CONFIG_SYS_FSL_CORENET_PMAN2_OFFSET 0x5000 #define CONFIG_SYS_FSL_CORENET_PMAN3_OFFSET 0x6000 #endif -#define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x8000 -#define CONFIG_SYS_MPC85xx_DDR2_OFFSET 0x9000 -#define CONFIG_SYS_MPC85xx_DDR3_OFFSET 0xA000 +#define CONFIG_SYS_MPC8xxx_DDR_OFFSET 0x8000 +#define CONFIG_SYS_MPC8xxx_DDR2_OFFSET 0x9000 +#define CONFIG_SYS_MPC8xxx_DDR3_OFFSET 0xA000 #define CONFIG_SYS_FSL_CORENET_CLK_OFFSET 0xE1000 #define CONFIG_SYS_FSL_CORENET_RCPM_OFFSET 0xE2000 #define CONFIG_SYS_FSL_CORENET_SERDES_OFFSET 0xEA000 @@ -2929,9 +2932,9 @@ struct ccsr_pman { #define CONFIG_SYS_FSL_CLUSTER_1_L2_OFFSET 0xC20000 #else #define CONFIG_SYS_MPC85xx_ECM_OFFSET 0x0000 -#define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x2000 +#define CONFIG_SYS_MPC8xxx_DDR_OFFSET 0x2000 #define CONFIG_SYS_MPC85xx_LBC_OFFSET 0x5000 -#define CONFIG_SYS_MPC85xx_DDR2_OFFSET 0x6000 +#define CONFIG_SYS_MPC8xxx_DDR2_OFFSET 0x6000 #define CONFIG_SYS_MPC85xx_ESPI_OFFSET 0x7000 #define CONFIG_SYS_MPC85xx_PCI1_OFFSET 0x8000 #define CONFIG_SYS_MPC85xx_PCIX_OFFSET 0x8000 @@ -2998,12 +3001,12 @@ struct ccsr_pman { (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_RCPM_OFFSET) #define CONFIG_SYS_MPC85xx_ECM_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ECM_OFFSET) -#define CONFIG_SYS_MPC85xx_DDR_ADDR \ - (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR_OFFSET) -#define CONFIG_SYS_MPC85xx_DDR2_ADDR \ - (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR2_OFFSET) -#define CONFIG_SYS_MPC85xx_DDR3_ADDR \ - (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR3_OFFSET) +#define CONFIG_SYS_MPC8xxx_DDR_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR_OFFSET) +#define CONFIG_SYS_MPC8xxx_DDR2_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR2_OFFSET) +#define CONFIG_SYS_MPC8xxx_DDR3_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR3_OFFSET) #define CONFIG_SYS_LBC_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_LBC_OFFSET) #define CONFIG_SYS_IFC_ADDR \ diff --git a/arch/powerpc/include/asm/immap_86xx.h b/arch/powerpc/include/asm/immap_86xx.h index cc338e4739..2a704fe6b7 100644 --- a/arch/powerpc/include/asm/immap_86xx.h +++ b/arch/powerpc/include/asm/immap_86xx.h @@ -1252,10 +1252,10 @@ typedef struct immap { extern immap_t *immr; -#define CONFIG_SYS_MPC86xx_DDR_OFFSET 0x2000 -#define CONFIG_SYS_MPC86xx_DDR_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DDR_OFFSET) -#define CONFIG_SYS_MPC86xx_DDR2_OFFSET 0x6000 -#define CONFIG_SYS_MPC86xx_DDR2_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DDR2_OFFSET) +#define CONFIG_SYS_MPC8xxx_DDR_OFFSET 0x2000 +#define CONFIG_SYS_MPC8xxx_DDR_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR_OFFSET) +#define CONFIG_SYS_MPC8xxx_DDR2_OFFSET 0x6000 +#define CONFIG_SYS_MPC8xxx_DDR2_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR2_OFFSET) #define CONFIG_SYS_MPC86xx_DMA_OFFSET 0x21000 #define CONFIG_SYS_MPC86xx_DMA_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DMA_OFFSET) #define CONFIG_SYS_MPC86xx_PIC_OFFSET 0x40000 diff --git a/board/exmeritus/hww1u1a/hww1u1a.c b/board/exmeritus/hww1u1a/hww1u1a.c index 52c22faaa0..89cfaad91f 100644 --- a/board/exmeritus/hww1u1a/hww1u1a.c +++ b/board/exmeritus/hww1u1a/hww1u1a.c @@ -105,7 +105,7 @@ int checkboard(void) * and delay a while before we continue. */ if (mpc85xx_gpio_get(GPIO_RESETS)) { - ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR; + ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR; puts("Debugger detected... extra device reset enabled!\n"); diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index 36f7c4f30f..75725b49ad 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -53,6 +53,7 @@ COBJS-$(CONFIG_P2020DS) += ics307_clk.o COBJS-$(CONFIG_P3041DS) += ics307_clk.o COBJS-$(CONFIG_P4080DS) += ics307_clk.o COBJS-$(CONFIG_P5020DS) += ics307_clk.o +COBJS-$(CONFIG_P5040DS) += ics307_clk.o COBJS-$(CONFIG_VSC_CROSSBAR) += vsc3316_3308.o # deal with common files for P-series corenet based devices @@ -60,6 +61,7 @@ SUBLIB-$(CONFIG_P2041RDB) += p_corenet/libp_corenet.o SUBLIB-$(CONFIG_P3041DS) += p_corenet/libp_corenet.o SUBLIB-$(CONFIG_P4080DS) += p_corenet/libp_corenet.o SUBLIB-$(CONFIG_P5020DS) += p_corenet/libp_corenet.o +SUBLIB-$(CONFIG_P5040DS) += p_corenet/libp_corenet.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/freescale/common/ngpixis.h b/board/freescale/common/ngpixis.h index 1d4483d8b9..a239ee31df 100644 --- a/board/freescale/common/ngpixis.h +++ b/board/freescale/common/ngpixis.h @@ -45,7 +45,7 @@ typedef struct ngpixis { struct { u8 sw; u8 en; - } s[8]; + } s[9]; /* s[0]..s[7] is SW1..SW8, and s[8] is SW11 */ } __attribute__ ((packed)) ngpixis_t; /* Pointer to the PIXIS register set */ diff --git a/board/freescale/corenet_ds/Makefile b/board/freescale/corenet_ds/Makefile index 1fdf8b706b..d79193af2a 100644 --- a/board/freescale/corenet_ds/Makefile +++ b/board/freescale/corenet_ds/Makefile @@ -31,9 +31,11 @@ COBJS-y += ddr.o COBJS-$(CONFIG_P3041DS) += eth_hydra.o COBJS-$(CONFIG_P4080DS) += eth_p4080.o COBJS-$(CONFIG_P5020DS) += eth_hydra.o +COBJS-$(CONFIG_P5040DS) += eth_superhydra.o COBJS-$(CONFIG_P3041DS) += p3041ds_ddr.o COBJS-$(CONFIG_P4080DS) += p4080ds_ddr.o COBJS-$(CONFIG_P5020DS) += p5020ds_ddr.o +COBJS-$(CONFIG_P5040DS) += p5040ds_ddr.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/freescale/corenet_ds/corenet_ds.c b/board/freescale/corenet_ds/corenet_ds.c index a33c936fa0..21428e3347 100644 --- a/board/freescale/corenet_ds/corenet_ds.c +++ b/board/freescale/corenet_ds/corenet_ds.c @@ -45,6 +45,7 @@ int checkboard (void) struct cpu_type *cpu = gd->cpu; ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; unsigned int i; + static const char * const freq[] = {"100", "125", "156.25", "212.5" }; printf("Board: %sDS, ", cpu->name); printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", @@ -83,20 +84,28 @@ int checkboard (void) * don't match. */ puts("SERDES Reference Clocks: "); -#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS) +#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS) \ + || defined(CONFIG_P5040DS) sw = in_8(&PIXIS_SW(5)); for (i = 0; i < 3; i++) { - static const char *freq[] = {"100", "125", "156.25", "212.5" }; unsigned int clock = (sw >> (6 - (2 * i))) & 3; printf("Bank%u=%sMhz ", i+1, freq[clock]); } +#ifdef CONFIG_P5040DS + /* On P5040DS, SW11[7:8] determines the Bank 4 frequency */ + sw = in_8(&PIXIS_SW(9)); + printf("Bank4=%sMhz ", freq[sw & 3]); +#endif puts("\n"); #else sw = in_8(&PIXIS_SW(3)); - printf("Bank1=%uMHz ", (sw & 0x40) ? 125 : 100); - printf("Bank2=%sMHz ", (sw & 0x20) ? "156.25" : "125"); - printf("Bank3=%sMHz\n", (sw & 0x10) ? "156.25" : "125"); + /* SW3[2]: 0 = 100 Mhz, 1 = 125 MHz */ + /* SW3[3]: 0 = 125 Mhz, 1 = 156.25 MHz */ + /* SW3[4]: 0 = 125 Mhz, 1 = 156.25 MHz */ + printf("Bank1=%sMHz ", freq[!!(sw & 0x40)]); + printf("Bank2=%sMHz ", freq[1 + !!(sw & 0x20)]); + printf("Bank3=%sMHz\n", freq[1 + !!(sw & 0x10)]); #endif return 0; @@ -168,7 +177,8 @@ int misc_init_r(void) unsigned int i; u8 sw; -#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS) +#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS) \ + || defined(CONFIG_P5040DS) sw = in_8(&PIXIS_SW(5)); for (i = 0; i < 3; i++) { unsigned int clock = (sw >> (6 - (2 * i))) & 3; diff --git a/board/freescale/corenet_ds/ddr.c b/board/freescale/corenet_ds/ddr.c index 4a53b8d933..da284cde95 100644 --- a/board/freescale/corenet_ds/ddr.c +++ b/board/freescale/corenet_ds/ddr.c @@ -139,8 +139,8 @@ static const struct board_specific_parameters udimm0[] = { {2, 1250, 4, 6, 0xff, 2, 0}, {2, 1350, 5, 7, 0xff, 2, 0}, {2, 1666, 5, 8, 0xff, 2, 0}, - {1, 850, 4, 5, 0xff, 2, 0}, - {1, 950, 4, 7, 0xff, 2, 0}, + {1, 1250, 4, 6, 0xff, 2, 0}, + {1, 1335, 4, 7, 0xff, 2, 0}, {1, 1666, 4, 8, 0xff, 2, 0}, {} }; diff --git a/board/freescale/corenet_ds/eth_superhydra.c b/board/freescale/corenet_ds/eth_superhydra.c new file mode 100644 index 0000000000..ef9de25bd8 --- /dev/null +++ b/board/freescale/corenet_ds/eth_superhydra.c @@ -0,0 +1,722 @@ +/* + * Copyright 2009-2011 Freescale Semiconductor, Inc. + * Author: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * This file handles the board muxing between the Fman Ethernet MACs and + * the RGMII/SGMII/XGMII PHYs on a Freescale P5040 "Super Hydra" reference + * board. The RGMII PHYs are the two on-board 1Gb ports. The SGMII PHYs are + * provided by the standard Freescale four-port SGMII riser card. The 10Gb + * XGMII PHYs are provided via the XAUI riser card. The P5040 has 2 FMans + * and 5 1G interfaces and 10G interface per FMan. Based on the options in + * the RCW, we could have upto 3 SGMII cards and 1 XAUI card at a time. + * + * Muxing is handled via the PIXIS BRDCFG1 register. The EMI1 bits control + * muxing among the RGMII PHYs and the SGMII PHYs. The value for RGMII is + * always the same (0). The value for SGMII depends on which slot the riser is + * inserted in. The EMI2 bits control muxing for the the XGMII. Like SGMII, + * the value is based on which slot the XAUI is inserted in. + * + * The SERDES configuration is used to determine where the SGMII and XAUI cards + * exist, and also which Fman's MACs are routed to which PHYs. So for a given + * Fman MAC, there is one and only PHY it connects to. MACs cannot be routed + * to PHYs dynamically. + * + * + * This file also updates the device tree in three ways: + * + * 1) The status of each virtual MDIO node that is referenced by an Ethernet + * node is set to "okay". + * + * 2) The phy-handle property of each active Ethernet MAC node is set to the + * appropriate PHY node. + * + * 3) The "mux value" for each virtual MDIO node is set to the correct value, + * if necessary. Some virtual MDIO nodes do not have configurable mux + * values, so those values are hard-coded in the DTS. On the HYDRA board, + * the virtual MDIO node for the SGMII card needs to be updated. + * + * For all this to work, the device tree needs to have the following: + * + * 1) An alias for each PHY node that an Ethernet node could be routed to. + * + * 2) An alias for each real and virtual MDIO node that is disabled by default + * and might need to be enabled, and also might need to have its mux-value + * updated. + */ + +#include <common.h> +#include <netdev.h> +#include <asm/fsl_serdes.h> +#include <fm_eth.h> +#include <fsl_mdio.h> +#include <malloc.h> +#include <fdt_support.h> +#include <asm/fsl_dtsec.h> + +#include "../common/ngpixis.h" +#include "../common/fman.h" + +#ifdef CONFIG_FMAN_ENET + +#define BRDCFG1_EMI1_SEL_MASK 0x70 +#define BRDCFG1_EMI1_SEL_SLOT1 0x10 +#define BRDCFG1_EMI1_SEL_SLOT2 0x20 +#define BRDCFG1_EMI1_SEL_SLOT5 0x30 +#define BRDCFG1_EMI1_SEL_SLOT6 0x40 +#define BRDCFG1_EMI1_SEL_SLOT7 0x50 +#define BRDCFG1_EMI1_SEL_SLOT3 0x60 +#define BRDCFG1_EMI1_SEL_RGMII 0x00 +#define BRDCFG1_EMI1_EN 0x08 +#define BRDCFG1_EMI2_SEL_MASK 0x06 +#define BRDCFG1_EMI2_SEL_SLOT1 0x00 +#define BRDCFG1_EMI2_SEL_SLOT2 0x02 + +#define BRDCFG2_REG_GPIO_SEL 0x20 + +/* + * BRDCFG1 mask and value for each MAC + * + * This array contains the BRDCFG1 values (in mask/val format) that route the + * MDIO bus to a particular RGMII or SGMII PHY. + */ +static struct { + u8 mask; + u8 val; +} mdio_mux[NUM_FM_PORTS]; + +/* + * Mapping of all 18 SERDES lanes to board slots. A value of '0' here means + * that the mapping must be determined dynamically, or that the lane maps to + * something other than a board slot + */ +static u8 lane_to_slot[] = { + 7, 7, 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 2, 2, 1, 1, 0, 0, 0, 0 +}; + +/* + * Set the board muxing for a given MAC + * + * The MDIO layer calls this function every time it wants to talk to a PHY. + */ +void super_hydra_mux_mdio(u8 mask, u8 val) +{ + clrsetbits_8(&pixis->brdcfg1, mask, val); +} + +struct super_hydra_mdio { + u8 mask; + u8 val; + struct mii_dev *realbus; +}; + +static int super_hydra_mdio_read(struct mii_dev *bus, int addr, int devad, + int regnum) +{ + struct super_hydra_mdio *priv = bus->priv; + + super_hydra_mux_mdio(priv->mask, priv->val); + + return priv->realbus->read(priv->realbus, addr, devad, regnum); +} + +static int super_hydra_mdio_write(struct mii_dev *bus, int addr, int devad, + int regnum, u16 value) +{ + struct super_hydra_mdio *priv = bus->priv; + + super_hydra_mux_mdio(priv->mask, priv->val); + + return priv->realbus->write(priv->realbus, addr, devad, regnum, value); +} + +static int super_hydra_mdio_reset(struct mii_dev *bus) +{ + struct super_hydra_mdio *priv = bus->priv; + + return priv->realbus->reset(priv->realbus); +} + +static void super_hydra_mdio_set_mux(char *name, u8 mask, u8 val) +{ + struct mii_dev *bus = miiphy_get_dev_by_name(name); + struct super_hydra_mdio *priv = bus->priv; + + priv->mask = mask; + priv->val = val; +} + +static int super_hydra_mdio_init(char *realbusname, char *fakebusname) +{ + struct super_hydra_mdio *hmdio; + struct mii_dev *bus = mdio_alloc(); + + if (!bus) { + printf("Failed to allocate Hydra MDIO bus\n"); + return -1; + } + + hmdio = malloc(sizeof(*hmdio)); + if (!hmdio) { + printf("Failed to allocate Hydra private data\n"); + free(bus); + return -1; + } + + bus->read = super_hydra_mdio_read; + bus->write = super_hydra_mdio_write; + bus->reset = super_hydra_mdio_reset; + sprintf(bus->name, fakebusname); + + hmdio->realbus = miiphy_get_dev_by_name(realbusname); + + if (!hmdio->realbus) { + printf("No bus with name %s\n", realbusname); + free(bus); + free(hmdio); + return -1; + } + + bus->priv = hmdio; + + return mdio_register(bus); +} + +/* + * Given the following ... + * + * 1) A pointer to an Fman Ethernet node (as identified by the 'compat' + * compatible string and 'addr' physical address) + * + * 2) An Fman port + * + * ... update the phy-handle property of the Ethernet node to point to the + * right PHY. This assumes that we already know the PHY for each port. That + * information is stored in mdio_mux[]. + * + * The offset of the Fman Ethernet node is also passed in for convenience, but + * it is not used. + * + * Note that what we call "Fman ports" (enum fm_port) is really an Fman MAC. + * Inside the Fman, "ports" are things that connect to MACs. We only call them + * ports in U-Boot because on previous Ethernet devices (e.g. Gianfar), MACs + * and ports are the same thing. + */ +void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, + enum fm_port port, int offset) +{ + enum srds_prtcl device; + int lane, slot, phy; + char alias[32]; + + /* RGMII and XGMII are already mapped correctly in the DTS */ + + if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) { + device = serdes_device_from_fm_port(port); + lane = serdes_get_first_lane(device); + slot = lane_to_slot[lane]; + phy = fm_info_get_phy_address(port); + + sprintf(alias, "phy_sgmii_slot%u_%x", slot, phy); + fdt_set_phy_handle(fdt, compat, addr, alias); + } +} + +#define PIXIS_SW2_LANE_23_SEL 0x80 +#define PIXIS_SW2_LANE_45_SEL 0x40 +#define PIXIS_SW2_LANE_67_SEL_MASK 0x30 +#define PIXIS_SW2_LANE_67_SEL_5 0x00 +#define PIXIS_SW2_LANE_67_SEL_6 0x20 +#define PIXIS_SW2_LANE_67_SEL_7 0x10 +#define PIXIS_SW2_LANE_8_SEL 0x08 +#define PIXIS_SW2_LANE_1617_SEL 0x04 +#define PIXIS_SW11_LANE_9_SEL 0x04 +/* + * Initialize the lane_to_slot[] array. + * + * On the P4080DS "Expedition" board, the mapping of SERDES lanes to board + * slots is hard-coded. On the Hydra board, however, the mapping is controlled + * by board switch SW2, so the lane_to_slot[] array needs to be dynamically + * initialized. + */ +static void initialize_lane_to_slot(void) +{ + u8 sw2 = in_8(&PIXIS_SW(2)); + /* SW11 appears in the programming model as SW9 */ + u8 sw11 = in_8(&PIXIS_SW(9)); + + lane_to_slot[2] = (sw2 & PIXIS_SW2_LANE_23_SEL) ? 7 : 4; + lane_to_slot[3] = lane_to_slot[2]; + + lane_to_slot[4] = (sw2 & PIXIS_SW2_LANE_45_SEL) ? 7 : 6; + lane_to_slot[5] = lane_to_slot[4]; + + switch (sw2 & PIXIS_SW2_LANE_67_SEL_MASK) { + case PIXIS_SW2_LANE_67_SEL_5: + lane_to_slot[6] = 5; + break; + case PIXIS_SW2_LANE_67_SEL_6: + lane_to_slot[6] = 6; + break; + case PIXIS_SW2_LANE_67_SEL_7: + lane_to_slot[6] = 7; + break; + } + lane_to_slot[7] = lane_to_slot[6]; + + lane_to_slot[8] = (sw2 & PIXIS_SW2_LANE_8_SEL) ? 3 : 0; + lane_to_slot[9] = (sw11 & PIXIS_SW11_LANE_9_SEL) ? 0 : 3; + + lane_to_slot[16] = (sw2 & PIXIS_SW2_LANE_1617_SEL) ? 1 : 0; + lane_to_slot[17] = lane_to_slot[16]; +} + +#endif /* #ifdef CONFIG_FMAN_ENET */ + +/* + * Configure the status for the virtual MDIO nodes + * + * Rather than create the virtual MDIO nodes from scratch for each active + * virtual MDIO, we expect the DTS to have the nodes defined already, and we + * only enable the ones that are actually active. + * + * We assume that the DTS already hard-codes the status for all the + * virtual MDIO nodes to "disabled", so all we need to do is enable the + * active ones. + */ +void fdt_fixup_board_enet(void *fdt) +{ +#ifdef CONFIG_FMAN_ENET + enum fm_port i; + int lane, slot; + + for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { + int idx = i - FM1_DTSEC1; + + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_SGMII: + lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx); + if (lane >= 0) { + char alias[32]; + + slot = lane_to_slot[lane]; + sprintf(alias, "hydra_sg_slot%u", slot); + fdt_status_okay_by_alias(fdt, alias); + debug("Enabled MDIO node %s (slot %i)\n", + alias, slot); + } + break; + case PHY_INTERFACE_MODE_RGMII: + fdt_status_okay_by_alias(fdt, "hydra_rg"); + debug("Enabled MDIO node hydra_rg\n"); + break; + default: + break; + } + } + + lane = serdes_get_first_lane(XAUI_FM1); + if (lane >= 0) { + char alias[32]; + + slot = lane_to_slot[lane]; + sprintf(alias, "hydra_xg_slot%u", slot); + fdt_status_okay_by_alias(fdt, alias); + debug("Enabled MDIO node %s (slot %i)\n", alias, slot); + } + +#if CONFIG_SYS_NUM_FMAN == 2 + for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) { + int idx = i - FM2_DTSEC1; + + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_SGMII: + lane = serdes_get_first_lane(SGMII_FM2_DTSEC1 + idx); + if (lane >= 0) { + char alias[32]; + + slot = lane_to_slot[lane]; + sprintf(alias, "hydra_sg_slot%u", slot); + fdt_status_okay_by_alias(fdt, alias); + debug("Enabled MDIO node %s (slot %i)\n", + alias, slot); + } + break; + case PHY_INTERFACE_MODE_RGMII: + fdt_status_okay_by_alias(fdt, "hydra_rg"); + debug("Enabled MDIO node hydra_rg\n"); + break; + default: + break; + } + } + + lane = serdes_get_first_lane(XAUI_FM2); + if (lane >= 0) { + char alias[32]; + + slot = lane_to_slot[lane]; + sprintf(alias, "hydra_xg_slot%u", slot); + fdt_status_okay_by_alias(fdt, alias); + debug("Enabled MDIO node %s (slot %i)\n", alias, slot); + } +#endif /* CONFIG_SYS_NUM_FMAN == 2 */ +#endif /* CONFIG_FMAN_ENET */ +} + +/* + * Mapping of SerDes Protocol to MDIO MUX value and PHY address. + * + * Fman 1: + * DTSEC1 | DTSEC2 | DTSEC3 | DTSEC4 + * Mux Phy | Mux Phy | Mux Phy | Mux Phy + * Value Addr | Value Addr | Value Addr | Value Addr + * 0x00 2 1c | 2 1d | 2 1e | 2 1f + * 0x01 | | 6 1c | + * 0x02 | | 3 1c | 3 1d + * 0x03 2 1c | 2 1d | 2 1e | 2 1f + * 0x04 2 1c | 2 1d | 2 1e | 2 1f + * 0x05 | | 3 1c | 3 1d + * 0x06 2 1c | 2 1d | 2 1e | 2 1f + * 0x07 | | 6 1c | + * 0x11 2 1c | 2 1d | 2 1e | 2 1f + * 0x2a 2 | | 2 1e | 2 1f + * 0x34 6 1c | 6 1d | 4 1e | 4 1f + * 0x35 | | 3 1c | 3 1d + * 0x36 6 1c | 6 1d | 4 1e | 4 1f + * | | | + * Fman 2: | | | + * DTSEC1 | DTSEC2 | DTSEC3 | DTSEC4 + * EMI1 | EMI1 | EMI1 | EMI1 + * Mux Phy | Mux Phy | Mux Phy | Mux Phy + * Value Addr | Value Addr | Value Addr | Value Addr + * 0x00 | | 6 1c | 6 1d + * 0x01 | | | + * 0x02 | | 6 1c | 6 1d + * 0x03 3 1c | 3 1d | 6 1c | 6 1d + * 0x04 3 1c | 3 1d | 6 1c | 6 1d + * 0x05 | | 6 1c | 6 1d + * 0x06 | | 6 1c | 6 1d + * 0x07 | | | + * 0x11 | | | + * 0x2a | | | + * 0x34 | | | + * 0x35 | | | + * 0x36 | | | + */ + +int board_eth_init(bd_t *bis) +{ +#ifdef CONFIG_FMAN_ENET + struct fsl_pq_mdio_info dtsec_mdio_info; + struct tgec_mdio_info tgec_mdio_info; + unsigned int i, slot; + int lane; + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + int srds_prtcl = (in_be32(&gur->rcwsr[4]) & + FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26; + + printf("Initializing Fman\n"); + + initialize_lane_to_slot(); + + /* We want to use the PIXIS to configure MUX routing, not GPIOs. */ + setbits_8(&pixis->brdcfg2, BRDCFG2_REG_GPIO_SEL); + + memset(mdio_mux, 0, sizeof(mdio_mux)); + + dtsec_mdio_info.regs = + (struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR; + dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME; + + /* Register the real 1G MDIO bus */ + fsl_pq_mdio_init(bis, &dtsec_mdio_info); + + tgec_mdio_info.regs = + (struct tgec_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR; + tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME; + + /* Register the real 10G MDIO bus */ + fm_tgec_mdio_init(bis, &tgec_mdio_info); + + /* Register the three virtual MDIO front-ends */ + super_hydra_mdio_init(DEFAULT_FM_MDIO_NAME, + "SUPER_HYDRA_RGMII_MDIO"); + super_hydra_mdio_init(DEFAULT_FM_MDIO_NAME, + "SUPER_HYDRA_FM1_SGMII_MDIO"); + super_hydra_mdio_init(DEFAULT_FM_MDIO_NAME, + "SUPER_HYDRA_FM2_SGMII_MDIO"); + super_hydra_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, + "SUPER_HYDRA_FM1_TGEC_MDIO"); + super_hydra_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, + "SUPER_HYDRA_FM2_TGEC_MDIO"); + + /* + * Program the DTSEC PHY addresses assuming that they are all SGMII. + * For any DTSEC that's RGMII, we'll override its PHY address later. + * We assume that DTSEC5 is only used for RGMII. + */ + fm_info_set_phy_address(FM1_DTSEC1, CONFIG_SYS_FM1_DTSEC1_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR); + fm_info_set_phy_address(FM1_10GEC1, CONFIG_SYS_FM2_10GEC1_PHY_ADDR); + +#if (CONFIG_SYS_NUM_FMAN == 2) + fm_info_set_phy_address(FM2_DTSEC1, CONFIG_SYS_FM2_DTSEC1_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC2, CONFIG_SYS_FM2_DTSEC2_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC3, CONFIG_SYS_FM2_DTSEC1_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC4, CONFIG_SYS_FM2_DTSEC2_PHY_ADDR); + fm_info_set_phy_address(FM2_10GEC1, CONFIG_SYS_FM1_10GEC1_PHY_ADDR); +#endif + + switch (srds_prtcl) { + case 0: + case 3: + case 4: + case 6: + case 0x11: + case 0x2a: + case 0x34: + case 0x36: + fm_info_set_phy_address(FM1_DTSEC3, + CONFIG_SYS_FM1_DTSEC3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC4, + CONFIG_SYS_FM1_DTSEC4_PHY_ADDR); + break; + case 1: + case 2: + case 5: + case 7: + case 0x35: + fm_info_set_phy_address(FM1_DTSEC3, + CONFIG_SYS_FM1_DTSEC1_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC4, + CONFIG_SYS_FM1_DTSEC2_PHY_ADDR); + break; + default: + printf("Fman: Unsupport SerDes Protocol 0x%02x\n", srds_prtcl); + break; + } + + for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { + int idx = i - FM1_DTSEC1; + + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_SGMII: + lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx); + if (lane < 0) + break; + slot = lane_to_slot[lane]; + mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK; + debug("FM1@DTSEC%u expects SGMII in slot %u\n", + idx + 1, slot); + switch (slot) { + case 1: + mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT1 | + BRDCFG1_EMI1_EN; + break; + case 2: + mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT2 | + BRDCFG1_EMI1_EN; + break; + case 3: + mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT3 | + BRDCFG1_EMI1_EN; + break; + case 5: + mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT5 | + BRDCFG1_EMI1_EN; + break; + case 6: + mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT6 | + BRDCFG1_EMI1_EN; + break; + case 7: + mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT7 | + BRDCFG1_EMI1_EN; + break; + }; + + super_hydra_mdio_set_mux("SUPER_HYDRA_FM1_SGMII_MDIO", + mdio_mux[i].mask, mdio_mux[i].val); + fm_info_set_mdio(i, + miiphy_get_dev_by_name("SUPER_HYDRA_FM1_SGMII_MDIO")); + break; + case PHY_INTERFACE_MODE_RGMII: + /* + * FM1 DTSEC5 is routed via EC1 to the first on-board + * RGMII port. FM2 DTSEC5 is routed via EC2 to the + * second on-board RGMII port. The other DTSECs cannot + * be routed to RGMII. + */ + debug("FM1@DTSEC%u is RGMII at address %u\n", + idx + 1, 0); + fm_info_set_phy_address(i, 0); + mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK; + mdio_mux[i].val = BRDCFG1_EMI1_SEL_RGMII | + BRDCFG1_EMI1_EN; + super_hydra_mdio_set_mux("SUPER_HYDRA_RGMII_MDIO", + mdio_mux[i].mask, mdio_mux[i].val); + fm_info_set_mdio(i, + miiphy_get_dev_by_name("SUPER_HYDRA_RGMII_MDIO")); + break; + case PHY_INTERFACE_MODE_NONE: + fm_info_set_phy_address(i, 0); + break; + default: + printf("Fman1: DTSEC%u set to unknown interface %i\n", + idx + 1, fm_info_get_enet_if(i)); + fm_info_set_phy_address(i, 0); + break; + } + } + + /* + * For 10G, we only support one XAUI card per Fman. If present, then we + * force its routing and never touch those bits again, which removes the + * need for Linux to do any muxing. This works because of the way + * BRDCFG1 is defined, but it's a bit hackish. + * + * The PHY address for the XAUI card depends on which slot it's in. The + * macros we use imply that the PHY address is based on which FM, but + * that's not true. On the P4080DS, FM1 could only use XAUI in slot 5, + * and FM2 could only use a XAUI in slot 4. On the Hydra board, we + * check the actual slot and just use the macros as-is, even though + * the P3041 and P5020 only have one Fman. + */ + lane = serdes_get_first_lane(XAUI_FM1); + if (lane >= 0) { + debug("FM1@TGEC1 expects XAUI in slot %u\n", lane_to_slot[lane]); + mdio_mux[FM1_10GEC1].mask = BRDCFG1_EMI2_SEL_MASK; + mdio_mux[FM1_10GEC1].val = BRDCFG1_EMI2_SEL_SLOT2; + super_hydra_mdio_set_mux("SUPER_HYDRA_FM1_TGEC_MDIO", + mdio_mux[i].mask, mdio_mux[i].val); + } + + fm_info_set_mdio(FM1_10GEC1, + miiphy_get_dev_by_name("SUPER_HYDRA_FM1_TGEC_MDIO")); + +#if (CONFIG_SYS_NUM_FMAN == 2) + for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) { + int idx = i - FM2_DTSEC1; + + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_SGMII: + lane = serdes_get_first_lane(SGMII_FM2_DTSEC1 + idx); + if (lane < 0) + break; + slot = lane_to_slot[lane]; + mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK; + debug("FM2@DTSEC%u expects SGMII in slot %u\n", + idx + 1, slot); + switch (slot) { + case 1: + mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT1 | + BRDCFG1_EMI1_EN; + break; + case 2: + mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT2 | + BRDCFG1_EMI1_EN; + break; + case 3: + mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT3 | + BRDCFG1_EMI1_EN; + break; + case 5: + mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT5 | + BRDCFG1_EMI1_EN; + break; + case 6: + mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT6 | + BRDCFG1_EMI1_EN; + break; + case 7: + mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT7 | + BRDCFG1_EMI1_EN; + break; + }; + + super_hydra_mdio_set_mux("SUPER_HYDRA_FM2_SGMII_MDIO", + mdio_mux[i].mask, mdio_mux[i].val); + fm_info_set_mdio(i, + miiphy_get_dev_by_name("SUPER_HYDRA_FM2_SGMII_MDIO")); + break; + case PHY_INTERFACE_MODE_RGMII: + /* + * FM1 DTSEC5 is routed via EC1 to the first on-board + * RGMII port. FM2 DTSEC5 is routed via EC2 to the + * second on-board RGMII port. The other DTSECs cannot + * be routed to RGMII. + */ + debug("FM2@DTSEC%u is RGMII at address %u\n", + idx + 1, 1); + fm_info_set_phy_address(i, 1); + mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK; + mdio_mux[i].val = BRDCFG1_EMI1_SEL_RGMII | + BRDCFG1_EMI1_EN; + super_hydra_mdio_set_mux("SUPER_HYDRA_RGMII_MDIO", + mdio_mux[i].mask, mdio_mux[i].val); + fm_info_set_mdio(i, + miiphy_get_dev_by_name("SUPER_HYDRA_RGMII_MDIO")); + break; + case PHY_INTERFACE_MODE_NONE: + fm_info_set_phy_address(i, 0); + break; + default: + printf("Fman2: DTSEC%u set to unknown interface %i\n", + idx + 1, fm_info_get_enet_if(i)); + fm_info_set_phy_address(i, 0); + break; + } + } + + /* + * For 10G, we only support one XAUI card per Fman. If present, then we + * force its routing and never touch those bits again, which removes the + * need for Linux to do any muxing. This works because of the way + * BRDCFG1 is defined, but it's a bit hackish. + * + * The PHY address for the XAUI card depends on which slot it's in. The + * macros we use imply that the PHY address is based on which FM, but + * that's not true. On the P4080DS, FM1 could only use XAUI in slot 5, + * and FM2 could only use a XAUI in slot 4. On the Hydra board, we + * check the actual slot and just use the macros as-is, even though + * the P3041 and P5020 only have one Fman. + */ + lane = serdes_get_first_lane(XAUI_FM2); + if (lane >= 0) { + debug("FM2@TGEC1 expects XAUI in slot %u\n", lane_to_slot[lane]); + mdio_mux[FM2_10GEC1].mask = BRDCFG1_EMI2_SEL_MASK; + mdio_mux[FM2_10GEC1].val = BRDCFG1_EMI2_SEL_SLOT1; + super_hydra_mdio_set_mux("SUPER_HYDRA_FM2_TGEC_MDIO", + mdio_mux[i].mask, mdio_mux[i].val); + } + + fm_info_set_mdio(FM2_10GEC1, + miiphy_get_dev_by_name("SUPER_HYDRA_FM2_TGEC_MDIO")); + +#endif + + cpu_eth_init(bis); +#endif + + return pci_eth_init(bis); +} diff --git a/board/freescale/corenet_ds/p5040ds_ddr.c b/board/freescale/corenet_ds/p5040ds_ddr.c new file mode 100644 index 0000000000..e65de364d7 --- /dev/null +++ b/board/freescale/corenet_ds/p5040ds_ddr.c @@ -0,0 +1,18 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + */ + +#include <common.h> +#include <asm/fsl_ddr_sdram.h> + +fixed_ddr_parm_t fixed_ddr_parm_0[] = { + {0, 0, NULL} +}; + +fixed_ddr_parm_t fixed_ddr_parm_1[] = { + {0, 0, NULL} +}; diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c index a275d3a074..418c06b655 100644 --- a/board/freescale/mpc8540ads/mpc8540ads.c +++ b/board/freescale/mpc8540ads/mpc8540ads.c @@ -184,7 +184,7 @@ void lbc_sdram_init(void) phys_size_t fixed_sdram(void) { #ifndef CONFIG_SYS_RAMBOOT - volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); + volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR); ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c index 285edbce6b..a4f48bb234 100644 --- a/board/freescale/mpc8560ads/mpc8560ads.c +++ b/board/freescale/mpc8560ads/mpc8560ads.c @@ -389,7 +389,7 @@ void lbc_sdram_init(void) phys_size_t fixed_sdram(void) { #ifndef CONFIG_SYS_RAMBOOT - volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); + volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR); ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c index d119c6517f..0d3b418625 100644 --- a/board/freescale/mpc8569mds/mpc8569mds.c +++ b/board/freescale/mpc8569mds/mpc8569mds.c @@ -247,7 +247,7 @@ int checkboard (void) #if !defined(CONFIG_SPD_EEPROM) phys_size_t fixed_sdram(void) { - volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR; + volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR; uint d_init; out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS); diff --git a/board/freescale/p1023rds/p1023rds.c b/board/freescale/p1023rds/p1023rds.c index eb11f3fe12..9110767a14 100644 --- a/board/freescale/p1023rds/p1023rds.c +++ b/board/freescale/p1023rds/p1023rds.c @@ -74,7 +74,7 @@ int checkboard(void) phys_size_t fixed_sdram(void) { #ifndef CONFIG_SYS_RAMBOOT - ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR; + ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR; set_next_law(0, LAW_SIZE_2G, LAW_TRGT_IF_DDR_1); diff --git a/board/freescale/p1_p2_rdb_pc/spl_minimal.c b/board/freescale/p1_p2_rdb_pc/spl_minimal.c index d48fb013b2..09019e98af 100644 --- a/board/freescale/p1_p2_rdb_pc/spl_minimal.c +++ b/board/freescale/p1_p2_rdb_pc/spl_minimal.c @@ -36,7 +36,7 @@ DECLARE_GLOBAL_DATA_PTR; */ static void sdram_init(void) { - ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR; + ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR; __raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds); __raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config); diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c index 3188f59e4b..d4a445108a 100644 --- a/board/freescale/p2020ds/p2020ds.c +++ b/board/freescale/p2020ds/p2020ds.c @@ -84,7 +84,7 @@ int checkboard(void) phys_size_t fixed_sdram(void) { - volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR; + volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR; uint d_init; ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; diff --git a/board/sbc8548/ddr.c b/board/sbc8548/ddr.c index 45ec485c50..9508561133 100644 --- a/board/sbc8548/ddr.c +++ b/board/sbc8548/ddr.c @@ -91,7 +91,7 @@ void get_spd(generic_spd_eeprom_t *spd, u8 i2c_address) */ phys_size_t fixed_sdram(void) { - volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); + volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR); out_be32(&ddr->cs0_bnds, 0x0000007f); out_be32(&ddr->cs1_bnds, 0x008000ff); diff --git a/board/socrates/sdram.c b/board/socrates/sdram.c index c8235f4a9b..8a9ce790f1 100644 --- a/board/socrates/sdram.c +++ b/board/socrates/sdram.c @@ -41,7 +41,7 @@ */ phys_size_t fixed_sdram(void) { - volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); + volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR); /* * Disable memory controller. diff --git a/boards.cfg b/boards.cfg index b8a238aec5..ca9b12b7d3 100644 --- a/boards.cfg +++ b/boards.cfg @@ -849,6 +849,7 @@ P5020DS_SDCARD powerpc mpc85xx corenet_ds freescale P5020DS_SECURE_BOOT powerpc mpc85xx corenet_ds freescale - P5020DS:SECURE_BOOT P5020DS_SPIFLASH powerpc mpc85xx corenet_ds freescale - P5020DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 P5020DS_SRIO_PCIE_BOOT powerpc mpc85xx corenet_ds freescale - P5020DS:SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000 +P5040DS powerpc mpc85xx corenet_ds freescale BSC9131RDB_SPIFLASH powerpc mpc85xx bsc9131rdb freescale - BSC9131RDB:BSC9131RDB,SPIFLASH stxgp3 powerpc mpc85xx stxgp3 stx stxssa powerpc mpc85xx stxssa stx - stxssa diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile index 7a1fcdd81f..7fbb50a562 100644 --- a/drivers/net/fm/Makefile +++ b/drivers/net/fm/Makefile @@ -44,6 +44,7 @@ COBJS-$(CONFIG_PPC_P2041) += p5020.o COBJS-$(CONFIG_PPC_P3041) += p5020.o COBJS-$(CONFIG_PPC_P4080) += p4080.o COBJS-$(CONFIG_PPC_P5020) += p5020.o +COBJS-$(CONFIG_PPC_P5040) += p5040.o COBJS-$(CONFIG_PPC_T4240) += t4240.o COBJS-$(CONFIG_PPC_B4860) += b4860.o endif diff --git a/drivers/net/fm/p5040.c b/drivers/net/fm/p5040.c new file mode 100644 index 0000000000..bc6b4ba0bb --- /dev/null +++ b/drivers/net/fm/p5040.c @@ -0,0 +1,113 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <phy.h> +#include <fm_eth.h> +#include <asm/io.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_serdes.h> + +u32 port_to_devdisr[] = { + [FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1, + [FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2, + [FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3, + [FM1_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC1_4, + [FM1_DTSEC5] = FSL_CORENET_DEVDISR2_DTSEC1_5, + [FM1_10GEC1] = FSL_CORENET_DEVDISR2_10GEC1, + [FM2_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC2_1, + [FM2_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC2_2, + [FM2_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC2_3, + [FM2_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC2_4, + [FM2_DTSEC5] = FSL_CORENET_DEVDISR2_DTSEC2_5, + [FM2_10GEC1] = FSL_CORENET_DEVDISR2_10GEC2, +}; + +static int is_device_disabled(enum fm_port port) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 devdisr2 = in_be32(&gur->devdisr2); + + return port_to_devdisr[port] & devdisr2; +} + +void fman_disable_port(enum fm_port port) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + + /* don't allow disabling of DTSEC1 as its needed for MDIO */ + if (port == FM1_DTSEC1) + return; + + setbits_be32(&gur->devdisr2, port_to_devdisr[port]); +} + +phy_interface_t fman_port_enet_if(enum fm_port port) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 rcwsr11 = in_be32(&gur->rcwsr[11]); + + if (is_device_disabled(port)) + return PHY_INTERFACE_MODE_NONE; + + if ((port == FM1_10GEC1) && (is_serdes_configured(XAUI_FM1))) + return PHY_INTERFACE_MODE_XGMII; + + if ((port == FM2_10GEC1) && (is_serdes_configured(XAUI_FM2))) + return PHY_INTERFACE_MODE_XGMII; + + /* handle RGMII first */ + if ((port == FM1_DTSEC5) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC1) == + FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_RGMII)) + return PHY_INTERFACE_MODE_RGMII; + + if ((port == FM1_DTSEC5) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC1) == + FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_MII)) + return PHY_INTERFACE_MODE_MII; + + if ((port == FM2_DTSEC5) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) == + FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_RGMII)) + return PHY_INTERFACE_MODE_RGMII; + + if ((port == FM2_DTSEC5) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) == + FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_MII)) + return PHY_INTERFACE_MODE_MII; + + switch (port) { + case FM1_DTSEC1: + case FM1_DTSEC2: + case FM1_DTSEC3: + case FM1_DTSEC4: + case FM1_DTSEC5: + if (is_serdes_configured(SGMII_FM1_DTSEC1 + port - FM1_DTSEC1)) + return PHY_INTERFACE_MODE_SGMII; + break; + case FM2_DTSEC1: + case FM2_DTSEC2: + case FM2_DTSEC3: + case FM2_DTSEC4: + case FM2_DTSEC5: + if (is_serdes_configured(SGMII_FM2_DTSEC1 + port - FM2_DTSEC1)) + return PHY_INTERFACE_MODE_SGMII; + break; + default: + return PHY_INTERFACE_MODE_NONE; + } + + return PHY_INTERFACE_MODE_NONE; +} diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index 48ae16374d..77ac1f7c7b 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -470,6 +470,28 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) } #endif +#ifdef CONFIG_SYS_P4080_ERRATUM_PCIE_A003 + if (enabled == 0) { + serdes_corenet_t *srds_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; + temp32 = in_be32(&srds_regs->srdspccr0); + + if ((temp32 >> 28) == 3) { + int i; + + out_be32(&srds_regs->srdspccr0, 2 << 28); + setbits_be32(&pci->pdb_stat, 0x08000000); + in_be32(&pci->pdb_stat); + udelay(100); + clrbits_be32(&pci->pdb_stat, 0x08000000); + asm("sync;isync"); + for (i=0; i < 100 && ltssm < PCI_LTSSM_L0; i++) { + pci_hose_read_config_word(hose, dev, PCI_LTSSM, <ssm); + udelay(1000); + } + enabled = ltssm >= PCI_LTSSM_L0; + } + } +#endif if (!enabled) { /* Let the user know there's no PCIe link */ printf("no link, regs @ 0x%lx\n", pci_info->regs); diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index 57aef21e96..437ee6ee6b 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -553,6 +553,7 @@ extern unsigned long get_sdram_size(void); /* SATA */ #define CONFIG_FSL_SATA +#define CONFIG_FSL_SATA_V2 #define CONFIG_LIBATA #ifdef CONFIG_FSL_SATA diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index b3c850d584..14d597aad2 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -360,6 +360,7 @@ /* SATA */ #define CONFIG_LIBATA #define CONFIG_FSL_SATA +#define CONFIG_FSL_SATA_V2 #define CONFIG_SYS_SATA_MAX_DEVICE 2 #define CONFIG_SATA1 diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h index 800d666ab2..878bd5fa5e 100644 --- a/include/configs/P1023RDS.h +++ b/include/configs/P1023RDS.h @@ -524,7 +524,7 @@ extern unsigned long get_clock_freq(void); /* Default address of microcode for the Linux Fman driver */ /* QE microcode/firmware address */ #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEF000000 +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 #else #define CONFIG_SYS_QE_FMAN_FW_IN_NAND #define CONFIG_SYS_QE_FMAN_FW_ADDR 0x1f00000 diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 5cdb628ab1..8b9b0dbc22 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -202,15 +202,21 @@ unsigned long get_board_sys_clk(unsigned long dummy); /* Set the local bus clock 1/8 of platform clock */ #define CONFIG_SYS_LBC_LCRR LCRR_CLKDIV_8 -#define CONFIG_SYS_FLASH_BASE 0xe8000000 /* Start of PromJet */ +/* + * This board doesn't have a promjet connector. + * However, it uses commone corenet board LAW and TLB. + * It is necessary to use the same start address with proper offset. + */ +#define CONFIG_SYS_FLASH_BASE 0xe0000000 #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_FLASH_BASE_PHYS 0xfe8000000ull +#define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull #else #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE #endif #define CONFIG_SYS_FLASH_BR_PRELIM \ - (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) + (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | \ + BR_PS_16 | BR_V) #define CONFIG_SYS_FLASH_OR_PRELIM \ ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \ | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR) @@ -294,7 +300,7 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_FLASH_EMPTY_INFO #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000} #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ @@ -539,7 +545,7 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEF000000 +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) @@ -560,8 +566,10 @@ unsigned long get_board_sys_clk(unsigned long dummy); #endif /* CONFIG_PCI */ /* SATA */ +#define CONFIG_FSL_SATA_V2 + +#ifdef CONFIG_FSL_SATA_V2 #define CONFIG_FSL_SATA -#ifdef CONFIG_FSL_SATA #define CONFIG_LIBATA #define CONFIG_SYS_SATA_MAX_DEVICE 2 diff --git a/include/configs/P3041DS.h b/include/configs/P3041DS.h index cf184e74ab..ce8f9b0b2e 100644 --- a/include/configs/P3041DS.h +++ b/include/configs/P3041DS.h @@ -32,6 +32,7 @@ #define CONFIG_MMC #define CONFIG_NAND_FSL_ELBC +#define CONFIG_FSL_SATA_V2 #define CONFIG_PCIE3 #define CONFIG_PCIE4 #define CONFIG_SYS_DPAA_RMAN diff --git a/include/configs/P5020DS.h b/include/configs/P5020DS.h index 7018d7a322..778230d335 100644 --- a/include/configs/P5020DS.h +++ b/include/configs/P5020DS.h @@ -32,6 +32,7 @@ #define CONFIG_MMC #define CONFIG_NAND_FSL_ELBC +#define CONFIG_FSL_SATA_V2 #define CONFIG_PCIE3 #define CONFIG_PCIE4 #define CONFIG_SYS_FSL_RAID_ENGINE diff --git a/include/configs/P5040DS.h b/include/configs/P5040DS.h new file mode 100644 index 0000000000..50d9e541a8 --- /dev/null +++ b/include/configs/P5040DS.h @@ -0,0 +1,40 @@ +/* + * Copyright 2009-2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * P5040 DS board configuration file + * + */ +#define CONFIG_P5040DS +#define CONFIG_PHYS_64BIT +#define CONFIG_PPC_P5040 + +#define CONFIG_FSL_NGPIXIS /* use common ngPIXIS code */ + +#define CONFIG_MMC +#define CONFIG_NAND_FSL_ELBC +#define CONFIG_PCIE3 +#define CONFIG_SYS_FSL_RAID_ENGINE + +#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ + +#include "corenet_ds.h" diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index c41b039996..3f42cd9a38 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -549,7 +549,7 @@ #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEF000000 +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/nand_spl/board/freescale/p1010rdb/nand_boot.c b/nand_spl/board/freescale/p1010rdb/nand_boot.c index 9c356901b1..3c7bc2bc65 100644 --- a/nand_spl/board/freescale/p1010rdb/nand_boot.c +++ b/nand_spl/board/freescale/p1010rdb/nand_boot.c @@ -35,7 +35,7 @@ unsigned long ddr_freq_mhz; void sdram_init(void) { - ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR; + ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR; /* mask off E bit */ u32 svr = SVR_SOC_VER(mfspr(SPRN_SVR)); diff --git a/nand_spl/board/freescale/p1023rds/nand_boot.c b/nand_spl/board/freescale/p1023rds/nand_boot.c index 89e339d512..d6756fbf80 100644 --- a/nand_spl/board/freescale/p1023rds/nand_boot.c +++ b/nand_spl/board/freescale/p1023rds/nand_boot.c @@ -33,7 +33,7 @@ DECLARE_GLOBAL_DATA_PTR; /* Fixed sdram init -- doesn't use serial presence detect. */ void sdram_init(void) { - ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR; + ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR; set_next_law(0, LAW_SIZE_2G, LAW_TRGT_IF_DDR_1); |
