diff options
127 files changed, 873 insertions, 1607 deletions
@@ -1,3 +1,123 @@ +commit 5f6c732affea9647762d27a4617a2ae64c52dceb +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Apr 18 16:17:46 2007 +0200 + + Update CHANGELOG + +commit ad4eb555671d97f96dc56eab55103b1f86874b01 +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Apr 18 14:30:39 2007 +0200 + + MCC200 board: remove warning which is obsolete after PSoC firmware changes + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 3747a3f010b2b1442dec3e871c69788b6017aaae +Author: Domen Puncer <domen.puncer@telargo.com> +Date: Wed Apr 18 12:11:05 2007 +0200 + + [PATCH] icecube/lite5200b: document wakeup from low-power support + + Signed-off-by: Domen Puncer <domen.puncer@telargo.com> + +commit e673226ff9d6aa91b47ceac74b8c13770b06bb37 +Author: Stefan Roese <sr@denx.de> +Date: Wed Apr 18 12:07:47 2007 +0200 + + ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f +Author: Stefan Roese <sr@denx.de> +Date: Wed Apr 18 12:05:59 2007 +0200 + + ppc4xx: Add output for bootrom location to 405EZ ports + + Now 405EZ ports also show upon bootup from which boot device + they are configured to boot: + + U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05) + + CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz) + Bootstrap Option E - Boot ROM Location EBC (32 bits) + 16 kB I-Cache 16 kB D-Cache + Board: Acadia - AMCC PPC405EZ Evaluation Board + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3 +Author: Domen Puncer <domen.puncer@telargo.com> +Date: Mon Apr 16 14:00:13 2007 +0200 + + [PATCH] icecube/lite5200b: wakeup from low-power support + + U-Boot part of Lite5200b low power mode support. + Puts SDRAM out of self-refresh and transfers control to + address saved at physical 0x0. + + Signed-off-by: Domen Puncer <domen.puncer@telargo.com> + Acked-by: Grant Likely <grant.likely@secretlab.ca> + +commit 8048cdd56f04a756eeea4951f402bf5cc33785db +Author: Wolfgang Denk <wd@denx.de> +Date: Sat Apr 14 21:16:54 2007 +0200 + + Update CHANGELOG + +commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e +Author: Heiko Schocher <hs@pollux.denx.de> +Date: Sat Apr 14 05:26:48 2007 +0200 + + [Fix] Set the LED status register on the UC101 for the LXT971 PHY. + clear the Display after reset. + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 7882751c78b7ecabfd49b0eff8de27661c71f16c +Author: Denis Peter <d.peter@mpl.ch> +Date: Fri Apr 13 09:13:33 2007 +0200 + + [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c + + Fix bug introduced by "Fix get_partition_info() parameter error in all + other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented + to use diskboot or scsiboot form another device than 0. + + Signed-off-by: Denis Peter <d.peter@mpl.ch> + +commit 0b94504d22e70f537c17a0d38c87edb6e370977d +Author: Greg Lopp <lopp@pobox.com> +Date: Fri Apr 13 08:02:24 2007 +0200 + + [PATCH] Fix use of "void *" for block dev read/write buffer pointers + + Signed-of-by: Greg Lopp <lopp@pobox.com> + Acked-by: Grant Likely <grant.likely@secretlab.ca> + +commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13 +Author: Jeffrey Mann <mannj@embeddedplanet.com> +Date: Thu Apr 12 14:15:59 2007 +0200 + + ppc4xx: Fix i2c divisor calcularion for PPC4xx + + This patch fixes changes the i2c_init(...) function to use the function + get_OPB_freq() rather than calculating the OPB speed by + sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is + specific per processor. The prior method was not and so was calculating + the wrong speed for some PPC4xx processors. + + Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 6c9ba919375db977aaad9146bf320c7afd07ae7a +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Apr 11 17:25:01 2007 +0200 + + Update CHANGELOG + + Signed-off-by: Wolfgang Denk <wd@denx.de> + commit 51056dd9863e6a1bc363afbbe1775c58cd967418 Author: Wolfgang Denk <wd@denx.de> Date: Wed Apr 11 17:22:55 2007 +0200 @@ -8,6 +128,54 @@ Date: Wed Apr 11 17:22:55 2007 +0200 * Use Newline as "password" string * Use just a single partition in NAND flash +commit c0707ce65677650b5ceab0500ee50ae5168afef2 +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Thu Apr 5 18:34:06 2007 +0800 + + [Blackfin][PATCH] Kill off a bunch of common local prototypes + +commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Thu Apr 5 18:33:04 2007 +0800 + + [Blackfin][PATCH] Fix dynamic CPLB generation issue + +commit 0445e3a264251d75b1be45ef713c70726a2952f0 +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Thu Apr 5 18:31:47 2007 +0800 + + [Blackfin][PATCH] minior cleanup + +commit 155fd766573981090e638b493d5857562151862e +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Thu Apr 5 18:31:18 2007 +0800 + + [Blackfin][PATCH] Fix copyright and update license + +commit 9fd437bbd75d282f899e1da50be20a2bf38450bc +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Thu Apr 5 18:30:25 2007 +0800 + + [Blackfin][PATCH] Add BF537 EMAC driver initialization + +commit 889256e8604e0c68db1d866d720894dffede9df6 +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Thu Apr 5 18:29:55 2007 +0800 + + [Blackfin][PATCH] call real the system synchronize instruction + +commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05 +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Thu Apr 5 18:29:17 2007 +0800 + + [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it + +commit dfeeab2cd680df047e68e723b246adf6f33bb556 +Author: Aubrey Li <aubrey.adi@gmail.com> +Date: Thu Apr 5 18:28:34 2007 +0800 + + [Blackfin][PATCH]: fix flash unaligned copy issue + commit 31c98a88228021b314c89ebb8104fb6473da4471 Author: Wolfgang Denk <wd@denx.de> Date: Wed Apr 4 02:09:30 2007 +0200 @@ -20,6 +188,18 @@ Date: Wed Apr 4 01:49:15 2007 +0200 Minor cleanup. +commit a65c5768e5537530bd1780af3d3fddc3113a163c +Author: Stefan Roese <sr@denx.de> +Date: Mon Apr 2 10:09:30 2007 +0200 + + ppc4xx: Change SysACE address on Katmai + + With this new base address of the Xilinx SystemACE controller + the Linux driver will be easier to adapt, since it can now be + mapped via the "normal" ioremap() call. + + Signed-off-by: Stefan Roese <sr@denx.de> + commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73 Author: Gerald Van Baren <vanbaren@cideas.com> Date: Sat Mar 31 14:30:53 2007 -0400 @@ -430,6 +430,7 @@ inka4x0_config: unconfig @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0 lite5200b_config \ +lite5200b_PM_config \ lite5200b_LOWBOOT_config: unconfig @mkdir -p $(obj)include @mkdir -p $(obj)board/icecube @@ -438,6 +439,10 @@ lite5200b_LOWBOOT_config: unconfig @ echo "... DDR memory revision" @ echo "#define CONFIG_MPC5200" >>$(obj)include/config.h @ echo "#define CONFIG_LITE5200B" >>$(obj)include/config.h + @[ -z "$(findstring _PM_,$@)" ] || \ + { echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h ; \ + echo "... with power management (low-power mode) support" ; \ + } @[ -z "$(findstring LOWBOOT_,$@)" ] || \ { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ echo "... with LOWBOOT configuration" ; \ diff --git a/board/amcc/acadia/acadia.c b/board/amcc/acadia/acadia.c index 7d0046a22f..baf598c677 100644 --- a/board/amcc/acadia/acadia.c +++ b/board/amcc/acadia/acadia.c @@ -26,7 +26,7 @@ extern void board_pll_init_f(void); -void liveoak_gpio_init(void) +static void acadia_gpio_init(void) { /* * GPIO0 setup (select GPIO or alternate function) @@ -55,8 +55,12 @@ int board_early_init_f(void) { unsigned int reg; - board_pll_init_f(); - liveoak_gpio_init(); + /* don't reinit PLL when booting via I2C bootstrap option */ + mfsdr(SDR_PINSTP, reg); + if (reg != 0xf0000000) + board_pll_init_f(); + + acadia_gpio_init(); /* USB Host core needs this bit set */ mfsdr(sdrultra1, reg); diff --git a/board/amcc/katmai/init.S b/board/amcc/katmai/init.S index 6b024eec40..5202ae694c 100644 --- a/board/amcc/katmai/init.S +++ b/board/amcc/katmai/init.S @@ -103,7 +103,7 @@ tlbtabB: tlbentry(CFG_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I) - tlbentry(CFG_ACE_BASE, SZ_1K, 0xE0000000, 4,AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_ACE_BASE, SZ_1K, CFG_ACE_BASE, 4,AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I) diff --git a/board/bf533-ezkit/Makefile b/board/bf533-ezkit/Makefile index 4fe7d785f3..e55c1a78a8 100644 --- a/board/bf533-ezkit/Makefile +++ b/board/bf533-ezkit/Makefile @@ -1,7 +1,7 @@ # # U-boot - Makefile # -# Copyright (c) 2007 Analog Device Inc. +# Copyright (c) 2005-2007 Analog Device Inc. # # (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. diff --git a/board/bf533-ezkit/bf533-ezkit.c b/board/bf533-ezkit/bf533-ezkit.c index feaeb00697..1dd4a3fe2e 100644 --- a/board/bf533-ezkit/bf533-ezkit.c +++ b/board/bf533-ezkit/bf533-ezkit.c @@ -1,7 +1,7 @@ /* * U-boot - ezkit533.c * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/board/bf533-ezkit/flash-defines.h b/board/bf533-ezkit/flash-defines.h index e211918bc2..bd9e859e70 100644 --- a/board/bf533-ezkit/flash-defines.h +++ b/board/bf533-ezkit/flash-defines.h @@ -1,7 +1,7 @@ /* * U-boot - flash-defines.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef __FLASHDEFINES_H__ @@ -60,7 +60,7 @@ void reset_flash(void); int erase_flash(void); int erase_block_flash(int, unsigned long); void unlock_flash(long lOffset); -int write_data(long lStart, long lCount, long lStride, int *pnData); +int write_data(long lStart, long lCount, uchar *pnData); int FillData(long lStart, long lCount, long lStride, int *pnData); int read_data(long lStart, long lCount, long lStride, int *pnData); int read_flash(long nOffset, int *pnValue); diff --git a/board/bf533-ezkit/flash.c b/board/bf533-ezkit/flash.c index 067a260906..299cdbae73 100644 --- a/board/bf533-ezkit/flash.c +++ b/board/bf533-ezkit/flash.c @@ -1,7 +1,7 @@ /* * U-boot - flash.c Flash driver for PSD4256GV * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * This file is based on BF533EzFlash.c originally written by Analog Devices, Inc. * * (C) Copyright 2000-2004 @@ -22,8 +22,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <asm/io.h> @@ -178,63 +178,66 @@ int flash_erase(flash_info_t * info, int s_first, int s_last) int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) { int ret; - - ret = write_data(addr, cnt, 1, (int *)src); + int d; + if (addr % 2) { + read_flash(addr - 1 - CFG_FLASH_BASE, &d); + d = (int)((d & 0x00FF) | (*src++ << 8)); + ret = write_data(addr - 1, 2, (uchar *) & d); + if (ret == FLASH_FAIL) + return ERR_NOT_ERASED; + ret = write_data(addr + 1, cnt - 1, src); + } else + ret = write_data(addr, cnt, src); if (ret == FLASH_FAIL) return ERR_NOT_ERASED; return FLASH_SUCCESS; } -int write_data(long lStart, long lCount, long lStride, int *pnData) +int write_data(long lStart, long lCount, uchar * pnData) { long i = 0; - int j = 0; unsigned long ulOffset = lStart - CFG_FLASH_BASE; int d; - int iShift = 0; - int iNumWords = 2; - int nLeftover = lCount % 4; int nSector = 0; + int flag = 0; - for (i = 0; (i < lCount / 4) && (i < BUFFER_SIZE); i++) { - for (iShift = 0, j = 0; (j < iNumWords); - j++, ulOffset += (lStride * 2)) { - if ((ulOffset >= INVALIDLOCNSTART) - && (ulOffset < INVALIDLOCNEND)) { - printf - ("Invalid locations, Try writing to another location \n"); - return FLASH_FAIL; - } - get_sector_number(ulOffset, &nSector); - read_flash(ulOffset, &d); - if (d != 0xffff) { - printf - ("Flash not erased at offset 0x%x Please erase to reprogram \n", - ulOffset); - return FLASH_FAIL; - } - unlock_flash(ulOffset); - if (write_flash(ulOffset, (pnData[i] >> iShift)) < 0) { - printf("Error programming the flash \n"); - return FLASH_FAIL; - } - iShift += 16; - } + if (lCount % 2) { + flag = 1; + lCount = lCount - 1; } - if (nLeftover > 0) { - if ((ulOffset >= INVALIDLOCNSTART) - && (ulOffset < INVALIDLOCNEND)) + + for (i = 0; i < lCount - 1; i += 2, ulOffset += 2) { + get_sector_number(ulOffset, &nSector); + read_flash(ulOffset, &d); + if (d != 0xffff) { + printf + ("Flash not erased at offset 0x%x Please erase to reprogram \n", + ulOffset); return FLASH_FAIL; + } + unlock_flash(ulOffset); + d = (int)(pnData[i] | pnData[i + 1] << 8); + write_flash(ulOffset, d); + if (poll_toggle_bit(ulOffset) < 0) { + printf("Error programming the flash \n"); + return FLASH_FAIL; + } + if ((i > 0) && (!(i % AFP_SectorSize2))) + printf("."); + } + if (flag) { get_sector_number(ulOffset, &nSector); read_flash(ulOffset, &d); if (d != 0xffff) { printf - ("Flash already programmed. Please erase to reprogram \n"); - printf("uloffset = 0x%x \t d = 0x%x\n", ulOffset, d); + ("Flash not erased at offset 0x%x Please erase to reprogram \n", + ulOffset); return FLASH_FAIL; } unlock_flash(ulOffset); - if (write_flash(ulOffset, pnData[i]) < 0) { + d = (int)(pnData[i] | (d & 0xFF00)); + write_flash(ulOffset, d); + if (poll_toggle_bit(ulOffset) < 0) { printf("Error programming the flash \n"); return FLASH_FAIL; } diff --git a/board/bf533-ezkit/psd4256.h b/board/bf533-ezkit/psd4256.h index 97765165f8..cc654b8956 100644 --- a/board/bf533-ezkit/psd4256.h +++ b/board/bf533-ezkit/psd4256.h @@ -1,7 +1,7 @@ /* * U-boot - psd4256.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ /* diff --git a/board/bf533-stamp/Makefile b/board/bf533-stamp/Makefile index 8223d591ce..02c941b5a5 100644 --- a/board/bf533-stamp/Makefile +++ b/board/bf533-stamp/Makefile @@ -1,7 +1,7 @@ # # U-boot - Makefile # -# Copyright (c) 2007 Analog Device Inc. +# Copyright (c) 2005-2007 Analog Device Inc. # # (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. diff --git a/board/bf533-stamp/bf533-stamp.c b/board/bf533-stamp/bf533-stamp.c index 2f6e75187b..b9dff99171 100644 --- a/board/bf533-stamp/bf533-stamp.c +++ b/board/bf533-stamp/bf533-stamp.c @@ -1,7 +1,7 @@ /* * U-boot - stamp.c STAMP board specific routines * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/board/bf533-stamp/bf533-stamp.h b/board/bf533-stamp/bf533-stamp.h index b2b51aa2ba..1e58e47546 100644 --- a/board/bf533-stamp/bf533-stamp.h +++ b/board/bf533-stamp/bf533-stamp.h @@ -1,7 +1,7 @@ /* * U-boot - stamp.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef __STAMP_H__ diff --git a/board/bf537-stamp/bf537-stamp.c b/board/bf537-stamp/bf537-stamp.c index cc4e9985fe..47f7c9edf6 100644 --- a/board/bf537-stamp/bf537-stamp.c +++ b/board/bf537-stamp/bf537-stamp.c @@ -1,7 +1,7 @@ /* * U-boot - BF537.c * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/board/bf537-stamp/flash-defines.h b/board/bf537-stamp/flash-defines.h index f19e171d04..acc1e8638b 100644 --- a/board/bf537-stamp/flash-defines.h +++ b/board/bf537-stamp/flash-defines.h @@ -1,7 +1,7 @@ /* * U-boot - flash-defines.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef __FLASHDEFINES_H__ diff --git a/board/bf537-stamp/flash.c b/board/bf537-stamp/flash.c index 42dcf062b1..ed85841479 100644 --- a/board/bf537-stamp/flash.c +++ b/board/bf537-stamp/flash.c @@ -1,7 +1,7 @@ /* * U-boot - flash.c Flash driver for PSD4256GV * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * This file is based on BF533EzFlash.c originally written by Analog Devices, Inc. * * (C) Copyright 2000-2004 @@ -22,8 +22,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <malloc.h> diff --git a/board/bf561-ezkit/bf561-ezkit.c b/board/bf561-ezkit/bf561-ezkit.c index 71281c0139..989b0194c1 100644 --- a/board/bf561-ezkit/bf561-ezkit.c +++ b/board/bf561-ezkit/bf561-ezkit.c @@ -2,7 +2,7 @@ * U-boot - ezkit561.c * * Copyright (c) 2005 Bas Vermeulen <bas@buyways.nl> - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -22,8 +22,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c index 700c9d9323..2960998434 100644 --- a/board/icecube/icecube.c +++ b/board/icecube/icecube.c @@ -42,6 +42,53 @@ #include "mt48lc16m16a2-75.h" # endif #endif + +#ifdef CONFIG_LITE5200B_PM +/* u-boot part of low-power mode implementation */ +#define SAVED_ADDR (*(void **)0x00000000) +#define PSC2_4 0x02 + +void lite5200b_wakeup(void) +{ + unsigned char wakeup_pin; + void (*linux_wakeup)(void); + + /* check PSC2_4, if it's down "QT" is signaling we have a wakeup + * from low power mode */ + *(vu_char *)MPC5XXX_WU_GPIO_ENABLE = PSC2_4; + __asm__ volatile ("sync"); + + wakeup_pin = *(vu_char *)MPC5XXX_WU_GPIO_DATA_I; + if (wakeup_pin & PSC2_4) + return; + + /* acknowledge to "QT" + * by holding pin at 1 for 10 uS */ + *(vu_char *)MPC5XXX_WU_GPIO_DIR = PSC2_4; + __asm__ volatile ("sync"); + *(vu_char *)MPC5XXX_WU_GPIO_DATA_O = PSC2_4; + __asm__ volatile ("sync"); + udelay(10); + + /* put ram out of self-refresh */ + *(vu_long *)MPC5XXX_SDRAM_CTRL |= 0x80000000; /* mode_en */ + __asm__ volatile ("sync"); + *(vu_long *)MPC5XXX_SDRAM_CTRL |= 0x50000000; /* cke ref_en */ + __asm__ volatile ("sync"); + *(vu_long *)MPC5XXX_SDRAM_CTRL &= ~0x80000000; /* !mode_en */ + __asm__ volatile ("sync"); + udelay(10); /* wait a bit */ + + /* jump back to linux kernel code */ + linux_wakeup = SAVED_ADDR; + printf("\n\nLooks like we just woke, transferring control to 0x%08lx\n", + linux_wakeup); + linux_wakeup(); +} +#else +#define lite5200b_wakeup() +#endif + #ifndef CFG_RAMBOOT static void sdram_start (int hi_addr) { @@ -208,6 +255,8 @@ long int initdram (int board_type) __asm__ volatile ("sync"); } + lite5200b_wakeup(); + return dramsize + dramsize2; } diff --git a/board/mcc200/lcd.c b/board/mcc200/lcd.c index 98b86d1834..726366ddf0 100644 --- a/board/mcc200/lcd.c +++ b/board/mcc200/lcd.c @@ -180,10 +180,6 @@ void lcd_enable (void) break; udelay (PSOC_WAIT_TIME); } - if (!retries) { - printf ("%s Warning: PSoC doesn't respond on " - "RTS NEGATE\n", __FUNCTION__); - } return; } diff --git a/board/uc101/uc101.c b/board/uc101/uc101.c index 7a6b3be72e..f726513965 100644 --- a/board/uc101/uc101.c +++ b/board/uc101/uc101.c @@ -221,6 +221,8 @@ long int initdram (int board_type) int checkboard (void) { puts ("Board: MAN UC101\n"); + /* clear the Display */ + *(char *)(CFG_DISP_CWORD) = 0x80; return 0; } diff --git a/common/cmd_ide.c b/common/cmd_ide.c index b4119f3072..ce99a41ab7 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -423,7 +423,7 @@ int do_diskboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } part = simple_strtoul(++ep, NULL, 16); } - if (get_partition_info (ide_dev_desc, part, &info)) { + if (get_partition_info (&ide_dev_desc[dev], part, &info)) { SHOW_BOOT_PROGRESS (-1); return 1; } @@ -1344,7 +1344,7 @@ ulong ide_read (int device, lbaint_t blknr, ulong blkcnt, void *buffer) ++n; ++blknr; - buffer += ATA_SECTORWORDS; + buffer += ATA_BLOCKSIZE; } IDE_READ_E: ide_led (DEVICE_LED(device), 0); /* LED off */ @@ -1428,7 +1428,7 @@ ulong ide_write (int device, lbaint_t blknr, ulong blkcnt, void *buffer) c = ide_inb (device, ATA_STATUS); /* clear IRQ */ ++n; ++blknr; - buffer += ATA_SECTORWORDS; + buffer += ATA_BLOCKSIZE; } WR_OUT: ide_led (DEVICE_LED(device), 0); /* LED off */ @@ -2052,7 +2052,7 @@ ulong atapi_read (int device, lbaint_t blknr, ulong blkcnt, void *buffer) n+=cnt; blkcnt-=cnt; blknr+=cnt; - buffer+=cnt*(ATAPI_READ_BLOCK_SIZE/4); /* ulong blocksize in ulong */ + buffer+=(cnt*ATAPI_READ_BLOCK_SIZE); } while (blkcnt > 0); return (n); } diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c index da36ed9e1d..00b84fad19 100644 --- a/common/cmd_scsi.c +++ b/common/cmd_scsi.c @@ -248,7 +248,7 @@ int do_scsiboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } part = simple_strtoul(++ep, NULL, 16); } - if (get_partition_info (scsi_dev_desc, part, &info)) { + if (get_partition_info (&scsi_dev_desc[dev], part, &info)) { printf("error reading partinfo\n"); return 1; } diff --git a/cpu/at32ap/atmel_mci.c b/cpu/at32ap/atmel_mci.c index 3e3789bcdd..9f62c0f14b 100644 --- a/cpu/at32ap/atmel_mci.c +++ b/cpu/at32ap/atmel_mci.c @@ -221,7 +221,7 @@ mmc_bread(int dev, unsigned long start, lbaint_t blkcnt, if (status & MMCI_BIT(RXRDY)) { data = mmci_readl(RDR); - // pr_debug("%x\n", data); + /* pr_debug("%x\n", data); */ *buffer++ = data; wordcount++; } diff --git a/cpu/bf533/Makefile b/cpu/bf533/Makefile index 90018f3f52..dd4f299acd 100644 --- a/cpu/bf533/Makefile +++ b/cpu/bf533/Makefile @@ -1,6 +1,6 @@ # U-boot - Makefile # -# Copyright (c) 2005 blackfin.uclinux.org +# Copyright (c) 2005-2007 Analog Devices Inc. # # (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -20,8 +20,8 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +# MA 02110-1301 USA # include $(TOPDIR)/config.mk diff --git a/cpu/bf533/bf533_serial.h b/cpu/bf533/bf533_serial.h index 0a04f3e8ce..25b96a9f69 100644 --- a/cpu/bf533/bf533_serial.h +++ b/cpu/bf533/bf533_serial.h @@ -1,7 +1,7 @@ /* * U-boot - bf533_serial.h Serial Driver defines * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * bf533_serial.h: Definitions for the BlackFin BF533 DSP serial driver. @@ -38,8 +38,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _Bf533_SERIAL_H diff --git a/cpu/bf533/config.mk b/cpu/bf533/config.mk index 10817d9ea9..6a713c3f51 100644 --- a/cpu/bf533/config.mk +++ b/cpu/bf533/config.mk @@ -1,6 +1,6 @@ # U-boot - config.mk # -# Copyright (c) 2005 blackfin.uclinux.org +# Copyright (c) 2005-2007 Analog Devices Inc. # # (C) Copyright 2000-2004 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -20,8 +20,8 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +# MA 02110-1301 USA # PLATFORM_RELFLAGS += -mcpu=bf533 -ffixed-P5 diff --git a/cpu/bf533/cpu.c b/cpu/bf533/cpu.c index ac8ec517ff..8118861f8d 100644 --- a/cpu/bf533/cpu.c +++ b/cpu/bf533/cpu.c @@ -1,7 +1,7 @@ /* * U-boot - cpu.c CPU specific functions * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> @@ -93,7 +93,7 @@ void icache_enable(void) /* Fill the rest with invalid entry */ if (j <= 15) { - for (; j <= 16; j++) { + for (; j < 16; j++) { debug("filling %i with 0", j); *I1++ = 0x0; } @@ -169,7 +169,7 @@ void dcache_enable(void) /* Fill the rest with invalid entry */ if (j <= 15) { - for (; j <= 16; j++) { + for (; j < 16; j++) { debug("filling %i with 0", j); *I1++ = 0x0; } diff --git a/cpu/bf533/cpu.h b/cpu/bf533/cpu.h index 821363e764..b6b73b1d8f 100644 --- a/cpu/bf533/cpu.h +++ b/cpu/bf533/cpu.h @@ -1,7 +1,7 @@ /* * U-boot - cpu.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _CPU_H_ diff --git a/cpu/bf533/flush.S b/cpu/bf533/flush.S index 0512f3bf92..62e3d65ae7 100644 --- a/cpu/bf533/flush.S +++ b/cpu/bf533/flush.S @@ -1,9 +1,9 @@ -/* Copyright (C) 2003 Analog Devices, Inc. All Rights Reserved. - * Copyright (C) 2004 LG SOft India. All Rights Reserved. +/* Copyright (C) 2003-2007 Analog Devices Inc. * * This file is subject to the terms and conditions of the GNU General Public * License. */ + #define ASSEMBLY #include <asm/linkage.h> diff --git a/cpu/bf533/interrupt.S b/cpu/bf533/interrupt.S index 524da8f511..c356d53aa6 100644 --- a/cpu/bf533/interrupt.S +++ b/cpu/bf533/interrupt.S @@ -1,7 +1,7 @@ /* * U-boot - interrupt.S Processing of interrupts and exception handling * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -35,8 +35,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #define ASSEMBLY diff --git a/cpu/bf533/interrupts.c b/cpu/bf533/interrupts.c index 9317f26d98..14d06cf8df 100644 --- a/cpu/bf533/interrupts.c +++ b/cpu/bf533/interrupts.c @@ -1,7 +1,7 @@ /* * U-boot - interrupts.c Interrupt related routines * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on interrupts.c * Copyright 1996 Roman Zippel @@ -30,8 +30,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/cpu/bf533/ints.c b/cpu/bf533/ints.c index f476f14342..55866896a0 100644 --- a/cpu/bf533/ints.c +++ b/cpu/bf533/ints.c @@ -1,7 +1,7 @@ /* * U-boot - ints.c Interrupt related routines * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on ints.c * @@ -32,8 +32,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/cpu/bf533/serial.c b/cpu/bf533/serial.c index 11a46be964..6cab5daac7 100644 --- a/cpu/bf533/serial.c +++ b/cpu/bf533/serial.c @@ -1,7 +1,7 @@ /* * U-boot - serial.c Serial driver for BF533 * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * bf533_serial.c: Serial driver for BlackFin BF533 DSP internal UART. @@ -38,8 +38,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/cpu/bf533/start.S b/cpu/bf533/start.S index 94556d681f..67a60cf21e 100644 --- a/cpu/bf533/start.S +++ b/cpu/bf533/start.S @@ -1,7 +1,7 @@ /* * U-boot - start.S Startup file of u-boot for BF533/BF561 * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on head.S * Copyright (c) 2003 Metrowerks/Motorola @@ -26,8 +26,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ /* diff --git a/cpu/bf533/start1.S b/cpu/bf533/start1.S index 72cfafb5e9..6d4731b696 100644 --- a/cpu/bf533/start1.S +++ b/cpu/bf533/start1.S @@ -1,7 +1,7 @@ /* * U-boot - start1.S Code running out of RAM after relocation * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #define ASSEMBLY diff --git a/cpu/bf533/traps.c b/cpu/bf533/traps.c index 248e34f3f5..19b1fde41d 100644 --- a/cpu/bf533/traps.c +++ b/cpu/bf533/traps.c @@ -1,7 +1,7 @@ /* * U-boot - traps.c Routines related to interrupts and exceptions * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * No original Copyright holder listed, @@ -29,8 +29,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> @@ -39,7 +39,6 @@ #include <asm/irq.h> #include <asm/system.h> #include <asm/traps.h> -#include <asm/page.h> #include <asm/machdep.h> #include "cpu.h" #include <asm/arch/anomaly.h> diff --git a/cpu/bf537/Makefile b/cpu/bf537/Makefile index 61c733886b..8b0f9c0e93 100644 --- a/cpu/bf537/Makefile +++ b/cpu/bf537/Makefile @@ -1,6 +1,6 @@ # U-boot - Makefile # -# Copyright (c) 2005 blackfin.uclinux.org +# Copyright (c) 2005-2007 Analog Devices Inc. # # (C) Copyright 2000-2004 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -20,8 +20,8 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +# MA 02110-1301 USA # include $(TOPDIR)/config.mk diff --git a/cpu/bf537/config.mk b/cpu/bf537/config.mk index 4d57d9c9ad..8a35789f13 100644 --- a/cpu/bf537/config.mk +++ b/cpu/bf537/config.mk @@ -1,6 +1,6 @@ # U-boot - config.mk # -# Copyright (c) 2005 blackfin.uclinux.org +# Copyright (c) 2005-2007 Analog Devices Inc. # # (C) Copyright 2000-2004 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -20,8 +20,8 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +# MA 02110-1301 USA # PLATFORM_RELFLAGS += -mcpu=bf537 -ffixed-P5 diff --git a/cpu/bf537/cpu.c b/cpu/bf537/cpu.c index cb8dc3cd16..62f603bdb0 100644 --- a/cpu/bf537/cpu.c +++ b/cpu/bf537/cpu.c @@ -1,7 +1,7 @@ /* * U-boot - cpu.c CPU specific functions * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/cpu/bf537/cpu.h b/cpu/bf537/cpu.h index 821363e764..b6b73b1d8f 100644 --- a/cpu/bf537/cpu.h +++ b/cpu/bf537/cpu.h @@ -1,7 +1,7 @@ /* * U-boot - cpu.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _CPU_H_ diff --git a/cpu/bf537/flush.S b/cpu/bf537/flush.S index c260a8f963..fbd26cc92b 100644 --- a/cpu/bf537/flush.S +++ b/cpu/bf537/flush.S @@ -1,9 +1,9 @@ -/* Copyright (C) 2003 Analog Devices, Inc. All Rights Reserved. - * Copyright (C) 2004 LG SOft India. All Rights Reserved. +/* Copyright (C) 2003-2007 Analog Devices Inc. * * This file is subject to the terms and conditions of the GNU General Public * License. */ + #define ASSEMBLY #include <asm/linkage.h> diff --git a/cpu/bf537/interrupt.S b/cpu/bf537/interrupt.S index a8be34f027..a71df55a93 100644 --- a/cpu/bf537/interrupt.S +++ b/cpu/bf537/interrupt.S @@ -1,7 +1,7 @@ /* * U-boot - interrupt.S Processing of interrupts and exception handling * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -35,8 +35,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #define ASSEMBLY diff --git a/cpu/bf537/interrupts.c b/cpu/bf537/interrupts.c index 2ca76ecb3c..d2213b1156 100644 --- a/cpu/bf537/interrupts.c +++ b/cpu/bf537/interrupts.c @@ -1,7 +1,7 @@ /* * U-boot - interrupts.c Interrupt related routines * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on interrupts.c * Copyright 1996 Roman Zippel @@ -30,8 +30,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/cpu/bf537/ints.c b/cpu/bf537/ints.c index f476f14342..55866896a0 100644 --- a/cpu/bf537/ints.c +++ b/cpu/bf537/ints.c @@ -1,7 +1,7 @@ /* * U-boot - ints.c Interrupt related routines * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on ints.c * @@ -32,8 +32,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/cpu/bf537/serial.c b/cpu/bf537/serial.c index dd4f916d50..e04d08a0e7 100644 --- a/cpu/bf537/serial.c +++ b/cpu/bf537/serial.c @@ -1,7 +1,7 @@ /* * U-boot - serial.c Serial driver for BF537 * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * bf537_serial.c: Serial driver for BlackFin BF537 internal UART. @@ -38,8 +38,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/cpu/bf537/serial.h b/cpu/bf537/serial.h index c9ee3dc068..76555c279d 100644 --- a/cpu/bf537/serial.h +++ b/cpu/bf537/serial.h @@ -1,7 +1,7 @@ /* * U-boot - bf537_serial.h Serial Driver defines * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * bf533_serial.h: Definitions for the BlackFin BF533 DSP serial driver. @@ -38,8 +38,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _Bf537_SERIAL_H diff --git a/cpu/bf537/start.S b/cpu/bf537/start.S index 264e9b6080..4e02bcb9e5 100644 --- a/cpu/bf537/start.S +++ b/cpu/bf537/start.S @@ -1,7 +1,7 @@ /* * U-boot - start.S Startup file of u-boot for BF537 * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on head.S * Copyright (c) 2003 Metrowerks/Motorola @@ -26,8 +26,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ /* diff --git a/cpu/bf537/start1.S b/cpu/bf537/start1.S index 72cfafb5e9..6d4731b696 100644 --- a/cpu/bf537/start1.S +++ b/cpu/bf537/start1.S @@ -1,7 +1,7 @@ /* * U-boot - start1.S Code running out of RAM after relocation * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #define ASSEMBLY diff --git a/cpu/bf537/traps.c b/cpu/bf537/traps.c index 994ece8f64..4e18e27df4 100644 --- a/cpu/bf537/traps.c +++ b/cpu/bf537/traps.c @@ -1,7 +1,7 @@ /* * U-boot - traps.c Routines related to interrupts and exceptions * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * No original Copyright holder listed, @@ -29,8 +29,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> @@ -39,7 +39,6 @@ #include <asm/irq.h> #include <asm/system.h> #include <asm/traps.h> -#include <asm/page.h> #include <asm/machdep.h> #include "cpu.h" #include <asm/arch/anomaly.h> diff --git a/cpu/bf561/Makefile b/cpu/bf561/Makefile index ee7842a5d3..29471694d9 100644 --- a/cpu/bf561/Makefile +++ b/cpu/bf561/Makefile @@ -1,6 +1,6 @@ # U-boot - Makefile # -# Copyright (c) 2005 blackfin.uclinux.org +# Copyright (c) 2005-2007 Analog Devices Inc. # # (C) Copyright 2000-2004 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -20,8 +20,8 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +# MA 02110-1301 USA # include $(TOPDIR)/config.mk diff --git a/cpu/bf561/config.mk b/cpu/bf561/config.mk index c49a0ba5fe..f4dc04bfc9 100644 --- a/cpu/bf561/config.mk +++ b/cpu/bf561/config.mk @@ -1,6 +1,6 @@ # U-boot - config.mk # -# Copyright (c) 2005 blackfin.uclinux.org +# Copyright (c) 2005-2007 Analog Devices Inc. # # (C) Copyright 2000-2004 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -20,8 +20,8 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +# MA 02110-1301 USA # PLATFORM_RELFLAGS += -mcpu=bf561 -ffixed-P5 diff --git a/cpu/bf561/cpu.c b/cpu/bf561/cpu.c index a7b53d8a2d..5b907cd1ef 100644 --- a/cpu/bf561/cpu.c +++ b/cpu/bf561/cpu.c @@ -1,7 +1,7 @@ /* * U-boot - cpu.c CPU specific functions * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/cpu/bf561/cpu.h b/cpu/bf561/cpu.h index 821363e764..b6b73b1d8f 100644 --- a/cpu/bf561/cpu.h +++ b/cpu/bf561/cpu.h @@ -1,7 +1,7 @@ /* * U-boot - cpu.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _CPU_H_ diff --git a/cpu/bf561/flush.S b/cpu/bf561/flush.S index 7e12c8305c..0140a60c49 100644 --- a/cpu/bf561/flush.S +++ b/cpu/bf561/flush.S @@ -1,9 +1,9 @@ -/* Copyright (C) 2003 Analog Devices, Inc. All Rights Reserved. - * Copyright (C) 2004 LG SOft India. All Rights Reserved. +/* Copyright (C) 2003-2007 Analog Devices Inc. * * This file is subject to the terms and conditions of the GNU General Public * License. */ + #define ASSEMBLY #include <asm/linkage.h> diff --git a/cpu/bf561/interrupt.S b/cpu/bf561/interrupt.S index f82fd9b824..21839ce7de 100644 --- a/cpu/bf561/interrupt.S +++ b/cpu/bf561/interrupt.S @@ -1,7 +1,7 @@ /* * U-boot - interrupt.S Processing of interrupts and exception handling * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -35,8 +35,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #define ASSEMBLY diff --git a/cpu/bf561/interrupts.c b/cpu/bf561/interrupts.c index e314f60d2d..ecbc6addfc 100644 --- a/cpu/bf561/interrupts.c +++ b/cpu/bf561/interrupts.c @@ -1,7 +1,7 @@ /* * U-boot - interrupts.c Interrupt related routines * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on interrupts.c * Copyright 1996 Roman Zippel @@ -30,8 +30,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/cpu/bf561/ints.c b/cpu/bf561/ints.c index 328e5d8ef6..27a38a3493 100644 --- a/cpu/bf561/ints.c +++ b/cpu/bf561/ints.c @@ -1,7 +1,7 @@ /* * U-boot - ints.c Interrupt related routines * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on ints.c * @@ -32,8 +32,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/cpu/bf561/serial.c b/cpu/bf561/serial.c index baec1d3e4d..7f5c695361 100644 --- a/cpu/bf561/serial.c +++ b/cpu/bf561/serial.c @@ -1,7 +1,7 @@ /* * U-boot - serial.c Serial driver for BF561 * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * bf533_serial.c: Serial driver for BlackFin BF533 DSP internal UART. @@ -38,8 +38,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/cpu/bf561/serial.h b/cpu/bf561/serial.h index 98c1242a32..c1cbf36acf 100644 --- a/cpu/bf561/serial.h +++ b/cpu/bf561/serial.h @@ -1,7 +1,7 @@ /* * U-boot - bf561_serial.h Serial Driver defines * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * bf533_serial.h: Definitions for the BlackFin BF533 DSP serial driver. @@ -38,8 +38,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _Bf561_SERIAL_H diff --git a/cpu/bf561/start.S b/cpu/bf561/start.S index 9333648048..bd26cf32f6 100644 --- a/cpu/bf561/start.S +++ b/cpu/bf561/start.S @@ -1,7 +1,7 @@ /* * U-boot - start.S Startup file of u-boot for BF533/BF561 * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on head.S * Copyright (c) 2003 Metrowerks/Motorola @@ -26,8 +26,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ /* diff --git a/cpu/bf561/start1.S b/cpu/bf561/start1.S index 72cfafb5e9..6d4731b696 100644 --- a/cpu/bf561/start1.S +++ b/cpu/bf561/start1.S @@ -1,7 +1,7 @@ /* * U-boot - start1.S Code running out of RAM after relocation * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #define ASSEMBLY diff --git a/cpu/bf561/traps.c b/cpu/bf561/traps.c index f5ff3a8079..7e2dcd17ad 100644 --- a/cpu/bf561/traps.c +++ b/cpu/bf561/traps.c @@ -1,7 +1,7 @@ /* * U-boot - traps.c Routines related to interrupts and exceptions * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * No original Copyright holder listed, @@ -29,8 +29,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c index 13a3870f3d..e59bd85e1b 100644 --- a/cpu/mpc5xxx/fec.c +++ b/cpu/mpc5xxx/fec.c @@ -467,6 +467,10 @@ static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis) miiphy_write(dev->name, phyAddr, 0x0, 0x8000); udelay(1000); +#if defined(CONFIG_UC101) + /* Set the LED configuration Register for the UC101 Board */ + miiphy_write(dev->name, phyAddr, 0x14, 0x4122); +#endif if (fec->xcv_type == MII10) { /* * Force 10Base-T, FDX operation diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c index 2d8740ccea..8e6bc84db0 100644 --- a/cpu/ppc4xx/cpu.c +++ b/cpu/ppc4xx/cpu.c @@ -125,6 +125,7 @@ int i2c_bootrom_enabled(void) return (val & SDR0_SDCS_SDD); #endif } +#endif #if defined(CONFIG_440GX) #define SDR0_PINSTP_SHIFT 29 @@ -178,16 +179,37 @@ static char *bootstrap_str[] = { }; #endif +#if defined(CONFIG_405EZ) +#define SDR0_PINSTP_SHIFT 28 +static char *bootstrap_str[] = { + "EBC (8 bits)", + "SPI (fast)", + "NAND (512 page, 4 addr cycle)", + "I2C (Addr 0x50)", + "EBC (32 bits)", + "I2C (Addr 0x50)", + "NAND (2K page, 5 addr cycle)", + "I2C (Addr 0x50)", + "EBC (16 bits)", + "Reserved", + "NAND (2K page, 4 addr cycle)", + "I2C (Addr 0x50)", + "NAND (512 page, 3 addr cycle)", + "I2C (Addr 0x50)", + "SPI (slow)", + "I2C (Addr 0x50)", +}; +#endif + #if defined(SDR0_PINSTP_SHIFT) static int bootstrap_option(void) { unsigned long val; - mfsdr(sdr_pinstp, val); - return ((val & 0xe0000000) >> SDR0_PINSTP_SHIFT); + mfsdr(SDR_PINSTP, val); + return ((val & 0xf0000000) >> SDR0_PINSTP_SHIFT); } #endif /* SDR0_PINSTP_SHIFT */ -#endif #if defined(CONFIG_440) @@ -403,11 +425,11 @@ int checkcpu (void) #if defined(I2C_BOOTROM) printf (" I2C boot EEPROM %sabled\n", i2c_bootrom_enabled() ? "en" : "dis"); +#endif /* I2C_BOOTROM */ #if defined(SDR0_PINSTP_SHIFT) printf (" Bootstrap Option %c - ", (char)bootstrap_option() + 'A'); printf ("Boot ROM Location %s\n", bootstrap_str[bootstrap_option()]); #endif /* SDR0_PINSTP_SHIFT */ -#endif /* I2C_BOOTROM */ #if defined(CONFIG_PCI) printf (" Internal PCI arbiter %sabled", pci_arbiter_enabled() ? "en" : "dis"); diff --git a/cpu/ppc4xx/i2c.c b/cpu/ppc4xx/i2c.c index 8f4da8621d..47c264e222 100644 --- a/cpu/ppc4xx/i2c.c +++ b/cpu/ppc4xx/i2c.c @@ -91,7 +91,6 @@ static void _i2c_bus_reset(void) void i2c_init(int speed, int slaveadd) { - sys_info_t sysInfo; unsigned long freqOPB; int val, divisor; int bus; @@ -124,8 +123,7 @@ void i2c_init(int speed, int slaveadd) /* Clock divide Register */ /* get OPB frequency */ - get_sys_info(&sysInfo); - freqOPB = sysInfo.freqPLB / sysInfo.pllOpbDiv; + freqOPB = get_OPB_freq(); /* set divisor according to freqOPB */ divisor = (freqOPB - 1) / 10000000; if (divisor == 0) diff --git a/doc/README.Lite5200B_low_power b/doc/README.Lite5200B_low_power new file mode 100644 index 0000000000..5b04fbba72 --- /dev/null +++ b/doc/README.Lite5200B_low_power @@ -0,0 +1,22 @@ +Lite5200B wakeup from low-power mode (CONFIG_LITE5200B_PM) +---------------------------------------------------------- + +Low-power mode as described in Lite5200B User's Manual, means that +with support of MC68HLC908QT1 microcontroller (refered to as QT), +everything but the SDRAM can be powered down. This brings +maximum power saving, while one can still restore previous state +quickly. + +Quick overview where U-Boot comes into the picture: +- OS saves device states +- OS saves wakeup handler address to physical 0x0, puts SDRAM into + self-refresh and signals to QT, it should power down the board +- / board is sleeping here / +- someone presses SW4 (connected to QT) +- U-Boot checks PSC2_4 pin, if QT drives it down, then we woke up, + so get SDRAM out of self-refresh and transfer control to OS + wakeup handler +- OS restores device states + +This was tested on Linux with USB and Ethernet in use. Adding +support for other devices is an OS issue. diff --git a/include/asm-avr32/arch-at32ap7000/gpio.h b/include/asm-avr32/arch-at32ap7000/gpio.h index 8d9b092750..e4812d4d08 100644 --- a/include/asm-avr32/arch-at32ap7000/gpio.h +++ b/include/asm-avr32/arch-at32ap7000/gpio.h @@ -210,4 +210,3 @@ void gpio_enable_macb1(void); void gpio_enable_mmci(void); #endif /* __ASM_AVR32_ARCH_GPIO_H__ */ - diff --git a/include/asm-blackfin/arch-bf533/bf533_serial.h b/include/asm-blackfin/arch-bf533/bf533_serial.h index ce58863b10..65749ee458 100644 --- a/include/asm-blackfin/arch-bf533/bf533_serial.h +++ b/include/asm-blackfin/arch-bf533/bf533_serial.h @@ -1,7 +1,7 @@ /* * U-boot bf533_serial.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BF533_SERIAL_H_ diff --git a/include/asm-blackfin/arch-bf533/bf5xx_rtc.h b/include/asm-blackfin/arch-bf533/bf5xx_rtc.h index bc09922a5e..f4440a8d47 100644 --- a/include/asm-blackfin/arch-bf533/bf5xx_rtc.h +++ b/include/asm-blackfin/arch-bf533/bf5xx_rtc.h @@ -1,7 +1,7 @@ /* * U-boot - bf533_rtc.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BF533_RTC_H_ diff --git a/include/asm-blackfin/arch-bf533/cplbtab.h b/include/asm-blackfin/arch-bf533/cplbtab.h deleted file mode 100644 index 89f0325381..0000000000 --- a/include/asm-blackfin/arch-bf533/cplbtab.h +++ /dev/null @@ -1,482 +0,0 @@ -/*This file is subject to the terms and conditions of the GNU General Public - * License. - * - * Blackfin BF533/2.6 support : LG Soft India - * Updated : Ashutosh Singh / Jahid Khan : Rrap Software Pvt Ltd - * Updated : 1. SDRAM_KERNEL, SDRAM_DKENEL are added as initial cplb's - * shouldn't be victimized. cplbmgr.S search logic is corrected - * to findout the appropriate victim. - * 2. SDRAM_IGENERIC in dpdt_table is replaced with SDRAM_DGENERIC - * : LG Soft India - */ -#include <config.h> - -#ifndef __ARCH_BFINNOMMU_CPLBTAB_H -#define __ARCH_BFINNOMMU_CPLBTAB_H - -/************************************************************************* - * ICPLB TABLE - *************************************************************************/ - -.data -/* This table is configurable */ - .align 4; - -/* Data Attibutes*/ - -#define SDRAM_IGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID) -#define SDRAM_IKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) -#define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) -#define SDRAM_INON_CHBL (PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID) - -/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ - -#define ANOMALY_05000158 0x200 -#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */ -#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_USER_WR | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) -#define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) - -#else /*Write Through */ -#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) -#define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) -#endif - -.align 4; -.global _ipdt_table _ipdt_table:.byte4 0x00000000; -.byte4(SDRAM_IKERNEL); /*SDRAM_Page0 */ -.byte4 0x00400000; -.byte4(SDRAM_IKERNEL); /*SDRAM_Page1 */ -.byte4 0x00800000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page2 */ -.byte4 0x00C00000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page3 */ -.byte4 0x01000000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page4 */ -.byte4 0x01400000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page5 */ -.byte4 0x01800000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page6 */ -.byte4 0x01C00000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page7 */ -#ifndef CONFIG_EZKIT /*STAMP Memory regions */ -.byte4 0x02000000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page8 */ -.byte4 0x02400000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page9 */ -.byte4 0x02800000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page10 */ -.byte4 0x02C00000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page11 */ -.byte4 0x03000000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page12 */ -.byte4 0x03400000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page13 */ -.byte4 0x03800000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page14 */ -.byte4 0x03C00000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page15 */ -#endif -.byte4 0x20000000; -.byte4(SDRAM_EBIU); /* Async Memory Bank 2 (Secnd) */ - -#ifdef CONFIG_STAMP -.byte4 0x04000000; -.byte4(SDRAM_IGENERIC); -.byte4 0x04400000; -.byte4(SDRAM_IGENERIC); -.byte4 0x04800000; -.byte4(SDRAM_IGENERIC); -.byte4 0x04C00000; -.byte4(SDRAM_IGENERIC); -.byte4 0x05000000; -.byte4(SDRAM_IGENERIC); -.byte4 0x05400000; -.byte4(SDRAM_IGENERIC); -.byte4 0x05800000; -.byte4(SDRAM_IGENERIC); -.byte4 0x05C00000; -.byte4(SDRAM_IGENERIC); -.byte4 0x06000000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page25 */ -.byte4 0x06400000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page26 */ -.byte4 0x06800000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page27 */ -.byte4 0x06C00000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page28 */ -.byte4 0x07000000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page29 */ -.byte4 0x07400000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page30 */ -.byte4 0x07800000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page31 */ -.byte4 0x07C00000; -.byte4(SDRAM_IKERNEL); /*SDRAM_Page32 */ -#endif -.byte4 0xffffffff; /* end of section - termination */ - -/********************************************************************** - * PAGE DESCRIPTOR TABLE - * - **********************************************************************/ - -/* Till here we are discussing about the static memory management model. - * However, the operating envoronments commonly define more CPLB - * descriptors to cover the entire addressable memory than will fit into - * the available on-chip 16 CPLB MMRs. When this happens, the below table - * will be used which will hold all the potentially required CPLB descriptors - * - * This is how Page descriptor Table is implemented in uClinux/Blackfin. - */ -.global _dpdt_table _dpdt_table:.byte4 0x00000000; -.byte4(SDRAM_DKERNEL); /*SDRAM_Page0 */ -.byte4 0x00400000; -.byte4(SDRAM_DKERNEL); /*SDRAM_Page1 */ -.byte4 0x00800000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page2 */ -.byte4 0x00C00000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page3 */ -.byte4 0x01000000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page4 */ -.byte4 0x01400000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page5 */ -.byte4 0x01800000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page6 */ -.byte4 0x01C00000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page7 */ - -#ifndef CONFIG_EZKIT -.byte4 0x02000000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page8 */ -.byte4 0x02400000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page9 */ -.byte4 0x02800000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page10 */ -.byte4 0x02C00000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page11 */ -.byte4 0x03000000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page12 */ -.byte4 0x03400000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page13 */ -.byte4 0x03800000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page14 */ -.byte4 0x03C00000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page15 */ -#endif - -#ifdef CONFIG_STAMP -.byte4 0x04000000; -.byte4(SDRAM_DGENERIC); -.byte4 0x04400000; -.byte4(SDRAM_DGENERIC); -.byte4 0x04800000; -.byte4(SDRAM_DGENERIC); -.byte4 0x04C00000; -.byte4(SDRAM_DGENERIC); -.byte4 0x05000000; -.byte4(SDRAM_DGENERIC); -.byte4 0x05400000; -.byte4(SDRAM_DGENERIC); -.byte4 0x05800000; -.byte4(SDRAM_DGENERIC); -.byte4 0x05C00000; -.byte4(SDRAM_DGENERIC); -.byte4 0x06000000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page25 */ -.byte4 0x06400000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page26 */ -.byte4 0x06800000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page27 */ -.byte4 0x06C00000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page28 */ -.byte4 0x07000000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page29 */ -.byte4 0x07400000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page30 */ -.byte4 0x07800000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page31 */ -.byte4 0x07C00000; -.byte4(SDRAM_DKERNEL); /*SDRAM_Page32 */ -#endif - -.byte4 0x20000000; -.byte4(SDRAM_EBIU); /* Async Memory Bank 0 (Prim A) */ - -#if (BFIN_CPU == ADSP_BF533) -.byte4 0xFF800000; -.byte4(L1_DMEMORY); -.byte4 0xFF801000; -.byte4(L1_DMEMORY); -.byte4 0xFF802000; -.byte4(L1_DMEMORY); -.byte4 0xFF803000; -.byte4(L1_DMEMORY); -#endif -.byte4 0xFF804000; -.byte4(L1_DMEMORY); -.byte4 0xFF805000; -.byte4(L1_DMEMORY); -.byte4 0xFF806000; -.byte4(L1_DMEMORY); -.byte4 0xFF807000; -.byte4(L1_DMEMORY); -#if (BFIN_CPU == ADSP_BF533) -.byte4 0xFF900000; -.byte4(L1_DMEMORY); -.byte4 0xFF901000; -.byte4(L1_DMEMORY); -.byte4 0xFF902000; -.byte4(L1_DMEMORY); -.byte4 0xFF903000; -.byte4(L1_DMEMORY); -#endif -#if ((BFIN_CPU == ADSP_BF532) || (BFIN_CPU == ADSP_BF533)) -.byte4 0xFF904000; -.byte4(L1_DMEMORY); -.byte4 0xFF905000; -.byte4(L1_DMEMORY); -.byte4 0xFF906000; -.byte4(L1_DMEMORY); -.byte4 0xFF907000; -.byte4(L1_DMEMORY); -#endif -.byte4 0xFFB00000; -.byte4(L1_DMEMORY); - -.byte4 0xffffffff; /*end of section - termination */ - -#ifdef CONFIG_CPLB_INFO -.global _ipdt_swapcount_table; /* swapin count first, then swapout count */ -_ipdt_swapcount_table: -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 10 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 20 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 30 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 40 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 50 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 60 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 70 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 80 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 90 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 100 */ - -.global _dpdt_swapcount_table; /* swapin count first, then swapout count */ -_dpdt_swapcount_table: -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 10 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 20 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 30 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 40 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 50 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 60 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 70 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 80 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 80 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 100 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 110 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 120 */ -#endif - -#endif /*__ARCH_BFINNOMMU_CPLBTAB_H*/ diff --git a/include/asm-blackfin/arch-bf533/irq.h b/include/asm-blackfin/arch-bf533/irq.h index 9c5230db41..323574590b 100644 --- a/include/asm-blackfin/arch-bf533/irq.h +++ b/include/asm-blackfin/arch-bf533/irq.h @@ -1,7 +1,7 @@ /* * U-boot bf533_irq.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * linux/arch/$(ARCH)/platform/$(PLATFORM)/irq.c @@ -33,8 +33,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BF533_IRQ_H_ diff --git a/include/asm-blackfin/arch-bf537/bf537_serial.h b/include/asm-blackfin/arch-bf537/bf537_serial.h index 1610411ee9..64088f243c 100644 --- a/include/asm-blackfin/arch-bf537/bf537_serial.h +++ b/include/asm-blackfin/arch-bf537/bf537_serial.h @@ -1,7 +1,7 @@ /* * U-boot bf537_serial.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BF537_SERIAL_H_ diff --git a/include/asm-blackfin/arch-bf537/bf5xx_rtc.h b/include/asm-blackfin/arch-bf537/bf5xx_rtc.h index 0043e42bf2..db5cc6f226 100644 --- a/include/asm-blackfin/arch-bf537/bf5xx_rtc.h +++ b/include/asm-blackfin/arch-bf537/bf5xx_rtc.h @@ -1,7 +1,7 @@ /* * U-boot - bf537_rtc.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BF537_RTC_H_ diff --git a/include/asm-blackfin/arch-bf537/cplbtab.h b/include/asm-blackfin/arch-bf537/cplbtab.h deleted file mode 100644 index c5151bb4ab..0000000000 --- a/include/asm-blackfin/arch-bf537/cplbtab.h +++ /dev/null @@ -1,408 +0,0 @@ -/*This file is subject to the terms and conditions of the GNU General Public - * License. - * - * Blackfin BF533/2.6 support : LG Soft India - * Updated : Ashutosh Singh / Jahid Khan : Rrap Software Pvt Ltd - * Updated : 1. SDRAM_KERNEL, SDRAM_DKENEL are added as initial cplb's - * shouldn't be victimized. cplbmgr.S search logic is corrected - * to findout the appropriate victim. - * 2. SDRAM_IGENERIC in dpdt_table is replaced with SDRAM_DGENERIC - * : LG Soft India - */ -#include <config.h> - -#ifndef __ARCH_BFINNOMMU_CPLBTAB_H -#define __ARCH_BFINNOMMU_CPLBTAB_H - -/* - * ICPLB TABLE - */ - -.data -/* This table is configurable */ - .align 4; - -/* Data Attibutes*/ - -#define SDRAM_IGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID) -#define SDRAM_IKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) -#define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) -#define SDRAM_INON_CHBL (PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID) - -/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ - -#define ANOMALY_05000158 0x200 -#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */ -#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_USER_WR | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) -#define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) - -#else /*Write Through */ -#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) -#define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) -#endif - -.align 4; -.global _ipdt_table _ipdt_table:.byte4 0x00000000; -.byte4(SDRAM_IKERNEL); /*SDRAM_Page0 */ -.byte4 0x00400000; -.byte4(SDRAM_IKERNEL); /*SDRAM_Page1 */ -.byte4 0x00800000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page2 */ -.byte4 0x00C00000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page3 */ -.byte4 0x01000000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page4 */ -.byte4 0x01400000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page5 */ -.byte4 0x01800000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page6 */ -.byte4 0x01C00000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page7 */ -.byte4 0x02000000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page8 */ -.byte4 0x02400000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page9 */ -.byte4 0x02800000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page10 */ -.byte4 0x02C00000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page11 */ -.byte4 0x03000000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page12 */ -.byte4 0x03400000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page13 */ -.byte4 0x03800000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page14 */ -.byte4 0x03C00000; -.byte4(SDRAM_IGENERIC); /*SDRAM_Page15 */ -.byte4 0x20000000; -.byte4(SDRAM_EBIU); /* Async Memory Bank 2 (Secnd) */ - -.byte4 0xffffffff; /* end of section - termination */ - -/* - * PAGE DESCRIPTOR TABLE - * - */ - -/* - * Till here we are discussing about the static memory management model. - * However, the operating envoronments commonly define more CPLB - * descriptors to cover the entire addressable memory than will fit into - * the available on-chip 16 CPLB MMRs. When this happens, the below table - * will be used which will hold all the potentially required CPLB descriptors - * - * This is how Page descriptor Table is implemented in uClinux/Blackfin. - */ -.global _dpdt_table _dpdt_table:.byte4 0x00000000; -.byte4(SDRAM_DKERNEL); /*SDRAM_Page0 */ -.byte4 0x00400000; -.byte4(SDRAM_DKERNEL); /*SDRAM_Page1 */ -.byte4 0x00800000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page2 */ -.byte4 0x00C00000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page3 */ -.byte4 0x01000000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page4 */ -.byte4 0x01400000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page5 */ -.byte4 0x01800000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page6 */ -.byte4 0x01C00000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page7 */ -.byte4 0x02000000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page8 */ -.byte4 0x02400000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page9 */ -.byte4 0x02800000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page10 */ -.byte4 0x02C00000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page11 */ -.byte4 0x03000000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page12 */ -.byte4 0x03400000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page13 */ -.byte4 0x03800000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page14 */ -.byte4 0x03C00000; -.byte4(SDRAM_DGENERIC); /*SDRAM_Page15 */ -.byte4 0x20000000; -.byte4(SDRAM_EBIU); /* Async Memory Bank 0 (Prim A) */ - -#if ((BFIN_CPU == ADSP_BF534) || (BFIN_CPU == ADSP_BF537)) -.byte4 0xFF800000; -.byte4(L1_DMEMORY); -.byte4 0xFF801000; -.byte4(L1_DMEMORY); -.byte4 0xFF802000; -.byte4(L1_DMEMORY); -.byte4 0xFF803000; -.byte4(L1_DMEMORY); -#endif -.byte4 0xFF804000; -.byte4(L1_DMEMORY); -.byte4 0xFF805000; -.byte4(L1_DMEMORY); -.byte4 0xFF806000; -.byte4(L1_DMEMORY); -.byte4 0xFF807000; -.byte4(L1_DMEMORY); -#if ((BFIN_CPU == ADSP_BF534) || (BFIN_CPU == ADSP_BF537)) -.byte4 0xFF900000; -.byte4(L1_DMEMORY); -.byte4 0xFF901000; -.byte4(L1_DMEMORY); -.byte4 0xFF902000; -.byte4(L1_DMEMORY); -.byte4 0xFF903000; -.byte4(L1_DMEMORY); -#endif -.byte4 0xFF904000; -.byte4(L1_DMEMORY); -.byte4 0xFF905000; -.byte4(L1_DMEMORY); -.byte4 0xFF906000; -.byte4(L1_DMEMORY); -.byte4 0xFF907000; -.byte4(L1_DMEMORY); - -.byte4 0xFFB00000; -.byte4(L1_DMEMORY); - -.byte4 0xffffffff; /*end of section - termination */ - -#ifdef CONFIG_CPLB_INFO -.global _ipdt_swapcount_table; /* swapin count first, then swapout count */ -_ipdt_swapcount_table: -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 10 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 20 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 30 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 40 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 50 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 60 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 70 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 80 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 90 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 100 */ - -.global _dpdt_swapcount_table; /* swapin count first, then swapout count */ -_dpdt_swapcount_table: -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 10 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 20 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 30 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 40 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 50 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 60 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 70 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 80 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 80 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 100 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 110 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 120 */ - -#endif - -#endif /*__ARCH_BFINNOMMU_CPLBTAB_H*/ diff --git a/include/asm-blackfin/arch-bf537/irq.h b/include/asm-blackfin/arch-bf537/irq.h index 4cb4c1502f..527d8a21f2 100644 --- a/include/asm-blackfin/arch-bf537/irq.h +++ b/include/asm-blackfin/arch-bf537/irq.h @@ -1,7 +1,7 @@ /* * U-boot bf537_irq.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * linux/arch/$(ARCH)/platform/$(PLATFORM)/irq.c @@ -33,8 +33,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BF537_IRQ_H_ diff --git a/include/asm-blackfin/arch-bf561/bf561_serial.h b/include/asm-blackfin/arch-bf561/bf561_serial.h index 0810228397..eb01ca25ba 100644 --- a/include/asm-blackfin/arch-bf561/bf561_serial.h +++ b/include/asm-blackfin/arch-bf561/bf561_serial.h @@ -1,7 +1,7 @@ /* * U-boot bf561_serial.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BF561_SERIAL_H_ diff --git a/include/asm-blackfin/arch-common/bf53x_rtc.h b/include/asm-blackfin/arch-common/bf53x_rtc.h index bc09922a5e..f4440a8d47 100644 --- a/include/asm-blackfin/arch-common/bf53x_rtc.h +++ b/include/asm-blackfin/arch-common/bf53x_rtc.h @@ -1,7 +1,7 @@ /* * U-boot - bf533_rtc.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BF533_RTC_H_ diff --git a/include/asm-blackfin/bitops.h b/include/asm-blackfin/bitops.h index 7766c4ab06..438e50b8e8 100644 --- a/include/asm-blackfin/bitops.h +++ b/include/asm-blackfin/bitops.h @@ -1,7 +1,7 @@ /* * U-boot - bitops.h Routines for bit operations * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_BITOPS_H diff --git a/include/asm-blackfin/blackfin.h b/include/asm-blackfin/blackfin.h index 0ec92071b5..bf502a4e62 100644 --- a/include/asm-blackfin/blackfin.h +++ b/include/asm-blackfin/blackfin.h @@ -1,7 +1,7 @@ /* * U-boot - blackfin.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_H_ diff --git a/include/asm-blackfin/blackfin_defs.h b/include/asm-blackfin/blackfin_defs.h index 2190215971..451d29c3cf 100644 --- a/include/asm-blackfin/blackfin_defs.h +++ b/include/asm-blackfin/blackfin_defs.h @@ -1,7 +1,7 @@ /* * U-boot - blackfin_defs.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef __BLACKFIN_DEFS_H__ diff --git a/include/asm-blackfin/byteorder.h b/include/asm-blackfin/byteorder.h index 3b4df4e134..a1a52a5c1a 100644 --- a/include/asm-blackfin/byteorder.h +++ b/include/asm-blackfin/byteorder.h @@ -1,7 +1,7 @@ /* * U-boot - byteorder.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_BYTEORDER_H diff --git a/include/asm-blackfin/cplb.h b/include/asm-blackfin/cplb.h index dd695e10ad..9d8d9ecc87 100644 --- a/include/asm-blackfin/cplb.h +++ b/include/asm-blackfin/cplb.h @@ -50,7 +50,7 @@ #define SDRAM_IGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID) #define SDRAM_IKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) -#define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) +#define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) #define SDRAM_INON_CHBL (PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID) /*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ @@ -61,20 +61,20 @@ #define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) #define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) #define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_USER_WR | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) -#define L1_DMEMORY (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) +#define L1_DMEMORY (PAGE_SIZE_4MB | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) #define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) #else /*Write Through */ #define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) #define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) #define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) -#define L1_DMEMORY (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) +#define L1_DMEMORY (PAGE_SIZE_4MB | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) #define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) #endif #if defined(CONFIG_BF561) -#define page_descriptor_table_size (CONFIG_MEM_SIZE/4 + 2) /* SDRAM +L1 + ASYNC_Memory */ +#define page_descriptor_table_size (CONFIG_MEM_SIZE/4 + 1 + 4) /* SDRAM +L1 + ASYNC_Memory */ #else -#define page_descriptor_table_size (CONFIG_MEM_SIZE/4 + 1 + 3) /* SDRAM + L1 + ASYNC_Memory */ +#define page_descriptor_table_size (CONFIG_MEM_SIZE/4 + 2) /* SDRAM + L1 + ASYNC_Memory */ #endif #endif /* _CPLB_H */ diff --git a/include/asm-blackfin/current.h b/include/asm-blackfin/current.h index 108c2792a0..ed2b851e95 100644 --- a/include/asm-blackfin/current.h +++ b/include/asm-blackfin/current.h @@ -1,7 +1,7 @@ /* * U-boot - current.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_CURRENT_H diff --git a/include/asm-blackfin/delay.h b/include/asm-blackfin/delay.h index 0c01e9fb7d..ea0b3664e0 100644 --- a/include/asm-blackfin/delay.h +++ b/include/asm-blackfin/delay.h @@ -1,7 +1,7 @@ /* * U-boot - delay.h Routines for introducing delays * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_DELAY_H diff --git a/include/asm-blackfin/entry.h b/include/asm-blackfin/entry.h index b64d406992..eb84f11bdb 100644 --- a/include/asm-blackfin/entry.h +++ b/include/asm-blackfin/entry.h @@ -1,7 +1,7 @@ /* * U-boot - entry.h Routines for context saving and restoring * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef __BLACKFIN_ENTRY_H @@ -27,7 +27,6 @@ #include <linux/config.h> #include <asm/setup.h> -#include <asm/page.h> /* * Stack layout in 'ret_from_exception': diff --git a/include/asm-blackfin/errno.h b/include/asm-blackfin/errno.h index 713bba0b22..0d2c618030 100644 --- a/include/asm-blackfin/errno.h +++ b/include/asm-blackfin/errno.h @@ -1,7 +1,7 @@ /* * U-boot - errno.h Error number defines * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_ERRNO_H diff --git a/include/asm-blackfin/global_data.h b/include/asm-blackfin/global_data.h index 1c738533c8..9024d0a06e 100644 --- a/include/asm-blackfin/global_data.h +++ b/include/asm-blackfin/global_data.h @@ -1,7 +1,7 @@ /* * U-boot - global_data.h Declarations for global data of u-boot * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef __ASM_GBL_DATA_H diff --git a/include/asm-blackfin/hw_irq.h b/include/asm-blackfin/hw_irq.h index baa3e0c5c3..9b360553cb 100644 --- a/include/asm-blackfin/hw_irq.h +++ b/include/asm-blackfin/hw_irq.h @@ -1,7 +1,7 @@ /* * U-boot - hw_irq.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * linux/arch/$(ARCH)/platform/$(PLATFORM)/hw_irq.h @@ -24,8 +24,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <linux/config.h> diff --git a/include/asm-blackfin/io-kernel.h b/include/asm-blackfin/io-kernel.h index 3c087c33ee..5d0ad06184 100644 --- a/include/asm-blackfin/io-kernel.h +++ b/include/asm-blackfin/io-kernel.h @@ -1,7 +1,7 @@ /* * U-boot - io-kernel.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_IO_H diff --git a/include/asm-blackfin/io.h b/include/asm-blackfin/io.h index 6bab6e766a..332d2c6437 100644 --- a/include/asm-blackfin/io.h +++ b/include/asm-blackfin/io.h @@ -1,7 +1,7 @@ /* * U-boot - io.h IO routines * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_IO_H @@ -37,6 +37,7 @@ extern void cf_outb(unsigned char val, volatile unsigned char *addr); static inline void sync(void) { + __builtin_bfin_ssync(); } /* diff --git a/include/asm-blackfin/irq.h b/include/asm-blackfin/irq.h index aede742120..1fff316881 100644 --- a/include/asm-blackfin/irq.h +++ b/include/asm-blackfin/irq.h @@ -1,7 +1,7 @@ /* * U-boot - irq.h Interrupt related header file * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file was based on * linux/arch/$(ARCH)/platform/$(PLATFORM)/irq.c @@ -31,8 +31,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_IRQ_H_ diff --git a/include/asm-blackfin/linkage.h b/include/asm-blackfin/linkage.h index 18f0c36d24..4fc1acf0ba 100644 --- a/include/asm-blackfin/linkage.h +++ b/include/asm-blackfin/linkage.h @@ -1,7 +1,7 @@ /* * U-boot - linkage.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _LINUX_LINKAGE_H diff --git a/include/asm-blackfin/machdep.h b/include/asm-blackfin/machdep.h index 4fea74c6c9..8bf94738ec 100644 --- a/include/asm-blackfin/machdep.h +++ b/include/asm-blackfin/machdep.h @@ -1,7 +1,7 @@ /* * U-boot - machdep.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_MACHDEP_H diff --git a/include/asm-blackfin/mem_init.h b/include/asm-blackfin/mem_init.h index d9d8bf9ba2..cb448ad61e 100644 --- a/include/asm-blackfin/mem_init.h +++ b/include/asm-blackfin/mem_init.h @@ -1,7 +1,7 @@ /* * U-boot - mem_init.h Header file for memory initialization * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #if (CONFIG_MEM_MT48LC16M16A2TG_75 || \ diff --git a/include/asm-blackfin/page.h b/include/asm-blackfin/page.h deleted file mode 100644 index d59828cdac..0000000000 --- a/include/asm-blackfin/page.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * U-boot - page.h - * - * Copyright (c) 2005 blackfin.uclinux.org - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _BLACKFIN_PAGE_H -#define _BLACKFIN_PAGE_H - -#include <linux/config.h> - -/* PAGE_SHIFT determines the page size */ - -#define PAGE_SHIFT (12) -#define PAGE_SIZE (4096) -#define PAGE_MASK (~(PAGE_SIZE-1)) - -#ifdef __KERNEL__ - -#include <asm/setup.h> - -#if PAGE_SHIFT < 13 -#define KTHREAD_SIZE (8192) -#else -#define KTHREAD_SIZE PAGE_SIZE -#endif - -#ifndef __ASSEMBLY__ - -#define get_user_page(vaddr) __get_free_page(GFP_KERNEL) -#define free_user_page(page, addr) free_page(addr) - -#define clear_page(page) memset((page), 0, PAGE_SIZE) -#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE) - -#define clear_user_page(page, vaddr) clear_page(page) -#define copy_user_page(to, from, vaddr) copy_page(to, from) - -/* - * These are used to make use of C type-checking.. - */ -typedef struct { - unsigned long pte; -} pte_t; -typedef struct { - unsigned long pmd[16]; -} pmd_t; -typedef struct { - unsigned long pgd; -} pgd_t; -typedef struct { - unsigned long pgprot; -} pgprot_t; - -#define pte_val(x) ((x).pte) -#define pmd_val(x) ((&x)->pmd[0]) -#define pgd_val(x) ((x).pgd) -#define pgprot_val(x) ((x).pgprot) - -#define __pte(x) ((pte_t) { (x) } ) -#define __pmd(x) ((pmd_t) { (x) } ) -#define __pgd(x) ((pgd_t) { (x) } ) -#define __pgprot(x) ((pgprot_t) { (x) } ) - -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) - -/* Pure 2^n version of get_order */ -extern __inline__ int get_order(unsigned long size) -{ - int order; - - size = (size - 1) >> (PAGE_SHIFT - 1); - order = -1; - do { - size >>= 1; - order++; - } while (size); - return order; -} - -#endif /* !__ASSEMBLY__ */ - -#include <asm/page_offset.h> - -#define PAGE_OFFSET (PAGE_OFFSET_RAW) - -#ifndef __ASSEMBLY__ - -#define __pa(vaddr) virt_to_phys((void *)vaddr) -#define __va(paddr) phys_to_virt((unsigned long)paddr) - -#define MAP_NR(addr) (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT) -#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)) -#define VALID_PAGE(page) ((page - mem_map) < max_mapnr) - -#define PAGE_BUG(page) do { \ - BUG(); \ -} while (0) - -#endif - -#endif - -#endif diff --git a/include/asm-blackfin/page_offset.h b/include/asm-blackfin/page_offset.h index 262473fc3d..cfd8f1fef3 100644 --- a/include/asm-blackfin/page_offset.h +++ b/include/asm-blackfin/page_offset.h @@ -1,7 +1,7 @@ /* * U-boot - page_offset.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ /* diff --git a/include/asm-blackfin/posix_types.h b/include/asm-blackfin/posix_types.h index f1f2b5ffc2..27889e8e85 100644 --- a/include/asm-blackfin/posix_types.h +++ b/include/asm-blackfin/posix_types.h @@ -1,7 +1,7 @@ /* * U-boot - posix_types.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef __ARCH_BLACKFIN_POSIX_TYPES_H diff --git a/include/asm-blackfin/processor.h b/include/asm-blackfin/processor.h index df49bedc0a..6cd4f567fc 100644 --- a/include/asm-blackfin/processor.h +++ b/include/asm-blackfin/processor.h @@ -1,7 +1,7 @@ /* * U-boot - processor.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * include/asm-m68k/processor.h @@ -23,8 +23,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef __ASM_BLACKFIN_PROCESSOR_H diff --git a/include/asm-blackfin/ptrace.h b/include/asm-blackfin/ptrace.h index afd57773ac..f1b7d0064b 100644 --- a/include/asm-blackfin/ptrace.h +++ b/include/asm-blackfin/ptrace.h @@ -1,7 +1,7 @@ /* * U-boot - ptrace.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_PTRACE_H diff --git a/include/asm-blackfin/segment.h b/include/asm-blackfin/segment.h index 9e6d817fc7..f309543742 100644 --- a/include/asm-blackfin/segment.h +++ b/include/asm-blackfin/segment.h @@ -1,7 +1,7 @@ /* * U-boot - segment.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_SEGMENT_H diff --git a/include/asm-blackfin/setup.h b/include/asm-blackfin/setup.h index a3c1715b4a..b6b82679ec 100644 --- a/include/asm-blackfin/setup.h +++ b/include/asm-blackfin/setup.h @@ -1,7 +1,7 @@ /* * U-boot - setup.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * asm/setup.h -- Definition of the Linux/Blackfin setup information @@ -22,8 +22,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_SETUP_H diff --git a/include/asm-blackfin/shared_resources.h b/include/asm-blackfin/shared_resources.h index fbef18618c..d280ffeeaa 100644 --- a/include/asm-blackfin/shared_resources.h +++ b/include/asm-blackfin/shared_resources.h @@ -1,7 +1,7 @@ /* * U-boot - setup.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _SHARED_RESOURCES_H_ diff --git a/include/asm-blackfin/string.h b/include/asm-blackfin/string.h index aac6bc99f5..dd50207092 100644 --- a/include/asm-blackfin/string.h +++ b/include/asm-blackfin/string.h @@ -1,7 +1,7 @@ /* * U-boot - string.h String functions * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ /* Changed by Lineo Inc. May 2001 */ @@ -30,7 +30,6 @@ #ifdef __KERNEL__ /* only set these up for kernel code */ #include <asm/setup.h> -#include <asm/page.h> #include <config.h> #include <asm/blackfin.h> diff --git a/include/asm-blackfin/system.h b/include/asm-blackfin/system.h index 0e53adfe0f..eda887fb62 100644 --- a/include/asm-blackfin/system.h +++ b/include/asm-blackfin/system.h @@ -1,7 +1,7 @@ /* * U-boot - system.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_SYSTEM_H diff --git a/include/asm-blackfin/traps.h b/include/asm-blackfin/traps.h index 29e6eba6fa..b90cedacbc 100644 --- a/include/asm-blackfin/traps.h +++ b/include/asm-blackfin/traps.h @@ -1,7 +1,7 @@ /* * U-boot - traps.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * linux/include/asm/traps.h @@ -23,8 +23,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ /* diff --git a/include/asm-blackfin/types.h b/include/asm-blackfin/types.h index 942ed275af..665a419f2b 100644 --- a/include/asm-blackfin/types.h +++ b/include/asm-blackfin/types.h @@ -1,7 +1,7 @@ /* * U-boot - types.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _BLACKFIN_TYPES_H diff --git a/include/asm-blackfin/u-boot.h b/include/asm-blackfin/u-boot.h index e1a435a137..b4928da4f5 100644 --- a/include/asm-blackfin/u-boot.h +++ b/include/asm-blackfin/u-boot.h @@ -1,7 +1,7 @@ /* * U-boot - u-boot.h Structure declarations for board specific data * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,15 +21,15 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef _U_BOOT_H_ #define _U_BOOT_H_ 1 typedef struct bd_info { - int bi_baudrate; /* serial console baudrate */ + int bi_baudrate; /* serial console baudrate */ unsigned long bi_ip_addr; /* IP Address */ unsigned char bi_enetaddr[6]; /* Ethernet adress */ unsigned long bi_arch_number; /* unique id for this board */ diff --git a/include/asm-blackfin/uaccess.h b/include/asm-blackfin/uaccess.h index 61e2bfea7c..6e913bb85b 100644 --- a/include/asm-blackfin/uaccess.h +++ b/include/asm-blackfin/uaccess.h @@ -1,7 +1,7 @@ /* * U-boot - uaccess.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * This file is based on * Based on: include/asm-m68knommu/uaccess.h @@ -22,8 +22,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef __BLACKFIN_UACCESS_H diff --git a/include/asm-blackfin/virtconvert.h b/include/asm-blackfin/virtconvert.h index 769f5a089c..9eda9f8554 100644 --- a/include/asm-blackfin/virtconvert.h +++ b/include/asm-blackfin/virtconvert.h @@ -1,7 +1,7 @@ /* * U-boot - virtconvert.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef __BLACKFIN_VIRT_CONVERT__ @@ -33,7 +33,6 @@ #include <linux/config.h> #include <asm/setup.h> -#include <asm/page.h> #define mm_vtop(vaddr) ((unsigned long) vaddr) #define mm_ptov(vaddr) ((unsigned long) vaddr) diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index ed3ee5a164..beaf3851dc 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -91,7 +91,7 @@ #define CONFIG_AUTOBOOT 1 #define CONFIG_AUTOBOOT_KEYED 1 #define CONFIG_AUTOBOOT_PROMPT \ - "Press SPACE to abort autoboot in %d seconds\n" + "Press SPACE to abort autoboot in %d seconds\n" #define CONFIG_AUTOBOOT_DELAY_STR "d" #define CONFIG_AUTOBOOT_STOP_STR " " diff --git a/include/configs/katmai.h b/include/configs/katmai.h index 1606d0da17..7f55366ca5 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -78,7 +78,7 @@ #define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE #define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024) -#define CFG_ACE_BASE 0xe0000000 /* Xilinx ACE controller - Compact Flash */ +#define CFG_ACE_BASE 0xfe000000 /* Xilinx ACE controller - Compact Flash */ /*----------------------------------------------------------------------- * Initial RAM & stack pointer (placed in internal SRAM) diff --git a/include/linux/mii.h b/include/linux/mii.h index 5b99168c8d..7c63095fd4 100644 --- a/include/linux/mii.h +++ b/include/linux/mii.h @@ -10,97 +10,97 @@ /* Generic MII registers. */ -#define MII_BMCR 0x00 /* Basic mode control register */ -#define MII_BMSR 0x01 /* Basic mode status register */ -#define MII_PHYSID1 0x02 /* PHYS ID 1 */ -#define MII_PHYSID2 0x03 /* PHYS ID 2 */ -#define MII_ADVERTISE 0x04 /* Advertisement control reg */ -#define MII_LPA 0x05 /* Link partner ability reg */ -#define MII_EXPANSION 0x06 /* Expansion register */ -#define MII_DCOUNTER 0x12 /* Disconnect counter */ -#define MII_FCSCOUNTER 0x13 /* False carrier counter */ -#define MII_NWAYTEST 0x14 /* N-way auto-neg test reg */ -#define MII_RERRCOUNTER 0x15 /* Receive error counter */ -#define MII_SREVISION 0x16 /* Silicon revision */ -#define MII_RESV1 0x17 /* Reserved... */ -#define MII_LBRERROR 0x18 /* Lpback, rx, bypass error */ -#define MII_PHYADDR 0x19 /* PHY address */ -#define MII_RESV2 0x1a /* Reserved... */ -#define MII_TPISTATUS 0x1b /* TPI status for 10mbps */ -#define MII_NCONFIG 0x1c /* Network interface config */ +#define MII_BMCR 0x00 /* Basic mode control register */ +#define MII_BMSR 0x01 /* Basic mode status register */ +#define MII_PHYSID1 0x02 /* PHYS ID 1 */ +#define MII_PHYSID2 0x03 /* PHYS ID 2 */ +#define MII_ADVERTISE 0x04 /* Advertisement control reg */ +#define MII_LPA 0x05 /* Link partner ability reg */ +#define MII_EXPANSION 0x06 /* Expansion register */ +#define MII_DCOUNTER 0x12 /* Disconnect counter */ +#define MII_FCSCOUNTER 0x13 /* False carrier counter */ +#define MII_NWAYTEST 0x14 /* N-way auto-neg test reg */ +#define MII_RERRCOUNTER 0x15 /* Receive error counter */ +#define MII_SREVISION 0x16 /* Silicon revision */ +#define MII_RESV1 0x17 /* Reserved... */ +#define MII_LBRERROR 0x18 /* Lpback, rx, bypass error */ +#define MII_PHYADDR 0x19 /* PHY address */ +#define MII_RESV2 0x1a /* Reserved... */ +#define MII_TPISTATUS 0x1b /* TPI status for 10mbps */ +#define MII_NCONFIG 0x1c /* Network interface config */ /* Basic mode control register. */ -#define BMCR_RESV 0x003f /* Unused... */ -#define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */ -#define BMCR_CTST 0x0080 /* Collision test */ -#define BMCR_FULLDPLX 0x0100 /* Full duplex */ -#define BMCR_ANRESTART 0x0200 /* Auto negotiation restart */ -#define BMCR_ISOLATE 0x0400 /* Disconnect DP83840 from MII */ -#define BMCR_PDOWN 0x0800 /* Powerdown the DP83840 */ -#define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */ -#define BMCR_SPEED100 0x2000 /* Select 100Mbps */ -#define BMCR_LOOPBACK 0x4000 /* TXD loopback bits */ -#define BMCR_RESET 0x8000 /* Reset the DP83840 */ +#define BMCR_RESV 0x003f /* Unused... */ +#define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */ +#define BMCR_CTST 0x0080 /* Collision test */ +#define BMCR_FULLDPLX 0x0100 /* Full duplex */ +#define BMCR_ANRESTART 0x0200 /* Auto negotiation restart */ +#define BMCR_ISOLATE 0x0400 /* Disconnect DP83840 from MII */ +#define BMCR_PDOWN 0x0800 /* Powerdown the DP83840 */ +#define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */ +#define BMCR_SPEED100 0x2000 /* Select 100Mbps */ +#define BMCR_LOOPBACK 0x4000 /* TXD loopback bits */ +#define BMCR_RESET 0x8000 /* Reset the DP83840 */ /* Basic mode status register. */ -#define BMSR_ERCAP 0x0001 /* Ext-reg capability */ -#define BMSR_JCD 0x0002 /* Jabber detected */ -#define BMSR_LSTATUS 0x0004 /* Link status */ -#define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */ -#define BMSR_RFAULT 0x0010 /* Remote fault detected */ -#define BMSR_ANEGCOMPLETE 0x0020 /* Auto-negotiation complete */ -#define BMSR_RESV 0x07c0 /* Unused... */ -#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */ -#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */ -#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */ -#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */ -#define BMSR_100BASE4 0x8000 /* Can do 100mbps, 4k packets */ +#define BMSR_ERCAP 0x0001 /* Ext-reg capability */ +#define BMSR_JCD 0x0002 /* Jabber detected */ +#define BMSR_LSTATUS 0x0004 /* Link status */ +#define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */ +#define BMSR_RFAULT 0x0010 /* Remote fault detected */ +#define BMSR_ANEGCOMPLETE 0x0020 /* Auto-negotiation complete */ +#define BMSR_RESV 0x07c0 /* Unused... */ +#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */ +#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */ +#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */ +#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */ +#define BMSR_100BASE4 0x8000 /* Can do 100mbps, 4k packets */ /* Advertisement control register. */ -#define ADVERTISE_SLCT 0x001f /* Selector bits */ -#define ADVERTISE_CSMA 0x0001 /* Only selector supported */ -#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */ -#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */ -#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */ -#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */ -#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */ -#define ADVERTISE_RESV 0x1c00 /* Unused... */ -#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */ -#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */ -#define ADVERTISE_NPAGE 0x8000 /* Next page bit */ +#define ADVERTISE_SLCT 0x001f /* Selector bits */ +#define ADVERTISE_CSMA 0x0001 /* Only selector supported */ +#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */ +#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */ +#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */ +#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */ +#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */ +#define ADVERTISE_RESV 0x1c00 /* Unused... */ +#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */ +#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */ +#define ADVERTISE_NPAGE 0x8000 /* Next page bit */ #define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \ ADVERTISE_CSMA) #define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \ - ADVERTISE_100HALF | ADVERTISE_100FULL) + ADVERTISE_100HALF | ADVERTISE_100FULL) /* Link partner ability register. */ -#define LPA_SLCT 0x001f /* Same as advertise selector */ -#define LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */ -#define LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */ -#define LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */ -#define LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */ -#define LPA_100BASE4 0x0200 /* Can do 100mbps 4k packets */ -#define LPA_RESV 0x1c00 /* Unused... */ -#define LPA_RFAULT 0x2000 /* Link partner faulted */ -#define LPA_LPACK 0x4000 /* Link partner acked us */ -#define LPA_NPAGE 0x8000 /* Next page bit */ +#define LPA_SLCT 0x001f /* Same as advertise selector */ +#define LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */ +#define LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */ +#define LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */ +#define LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */ +#define LPA_100BASE4 0x0200 /* Can do 100mbps 4k packets */ +#define LPA_RESV 0x1c00 /* Unused... */ +#define LPA_RFAULT 0x2000 /* Link partner faulted */ +#define LPA_LPACK 0x4000 /* Link partner acked us */ +#define LPA_NPAGE 0x8000 /* Next page bit */ #define LPA_DUPLEX (LPA_10FULL | LPA_100FULL) #define LPA_100 (LPA_100FULL | LPA_100HALF | LPA_100BASE4) /* Expansion register for auto-negotiation. */ -#define EXPANSION_NWAY 0x0001 /* Can do N-way auto-nego */ -#define EXPANSION_LCWP 0x0002 /* Got new RX page code word */ -#define EXPANSION_ENABLENPAGE 0x0004 /* This enables npage words */ -#define EXPANSION_NPCAPABLE 0x0008 /* Link partner supports npage */ -#define EXPANSION_MFAULTS 0x0010 /* Multiple faults detected */ -#define EXPANSION_RESV 0xffe0 /* Unused... */ +#define EXPANSION_NWAY 0x0001 /* Can do N-way auto-nego */ +#define EXPANSION_LCWP 0x0002 /* Got new RX page code word */ +#define EXPANSION_ENABLENPAGE 0x0004 /* This enables npage words */ +#define EXPANSION_NPCAPABLE 0x0008 /* Link partner supports npage */ +#define EXPANSION_MFAULTS 0x0010 /* Multiple faults detected */ +#define EXPANSION_RESV 0xffe0 /* Unused... */ /* N-way test register. */ -#define NWAYTEST_RESV1 0x00ff /* Unused... */ -#define NWAYTEST_LOOPBACK 0x0100 /* Enable loopback for N-way */ -#define NWAYTEST_RESV2 0xfe00 /* Unused... */ +#define NWAYTEST_RESV1 0x00ff /* Unused... */ +#define NWAYTEST_LOOPBACK 0x0100 /* Enable loopback for N-way */ +#define NWAYTEST_RESV2 0xfe00 /* Unused... */ /** @@ -114,7 +114,7 @@ * * The one exception to IEEE 802.3u is that 100baseT4 is placed * between 100T-full and 100T-half. If your phy does not support - * 100T4 this is fine. If your phy places 100T4 elsewhere in the + * 100T4 this is fine. If your phy places 100T4 elsewhere in the * priority order, you will need to roll your own function. */ static inline unsigned int mii_nway_result (unsigned int negotiated) diff --git a/include/linux/stat.h b/include/linux/stat.h index 7d6df8d694..43fd53fc98 100644 --- a/include/linux/stat.h +++ b/include/linux/stat.h @@ -7,7 +7,7 @@ extern "C" { #endif -#define S_IFMT 00170000 /* type of file */ +#define S_IFMT 00170000 /* type of file */ #define S_IFSOCK 0140000 /* named socket */ #define S_IFLNK 0120000 /* symbolic link */ #define S_IFREG 0100000 /* regular */ @@ -49,20 +49,20 @@ struct stat { ino_t st_ino; /* file id */ mode_t st_mode; /* ownership/protection */ nlink_t st_nlink; /* number of links */ - uid_t st_uid; /* user id */ - gid_t st_gid; /* group id */ + uid_t st_uid; /* user id */ + gid_t st_gid; /* group id */ dev_t st_rdev; off_t st_size; /* file size in # of bytes */ - unsigned long st_blksize; /* block size */ - unsigned long st_blocks; /* file size in # of blocks */ - unsigned long st_atime; /* time file was last accessed */ - unsigned long __unused1; - unsigned long st_mtime; /* time file was last modified */ - unsigned long __unused2; - unsigned long st_ctime; /* time file status was last changed */ - unsigned long __unused3; - unsigned long __unused4; - unsigned long __unused5; + unsigned long st_blksize; /* block size */ + unsigned long st_blocks; /* file size in # of blocks */ + unsigned long st_atime; /* time file was last accessed */ + unsigned long __unused1; + unsigned long st_mtime; /* time file was last modified */ + unsigned long __unused2; + unsigned long st_ctime; /* time file status was last changed */ + unsigned long __unused3; + unsigned long __unused4; + unsigned long __unused5; }; #endif /* __PPC__ */ @@ -97,30 +97,30 @@ struct stat { #if defined (__MIPS__) struct stat { - dev_t st_dev; - long st_pad1[3]; - ino_t st_ino; - mode_t st_mode; - nlink_t st_nlink; - uid_t st_uid; - gid_t st_gid; - dev_t st_rdev; - long st_pad2[2]; - off_t st_size; - long st_pad3; + dev_t st_dev; + long st_pad1[3]; + ino_t st_ino; + mode_t st_mode; + nlink_t st_nlink; + uid_t st_uid; + gid_t st_gid; + dev_t st_rdev; + long st_pad2[2]; + off_t st_size; + long st_pad3; /* * Actually this should be timestruc_t st_atime, st_mtime and st_ctime * but we don't have it under Linux. */ - time_t st_atime; - long reserved0; - time_t st_mtime; - long reserved1; - time_t st_ctime; - long reserved2; - long st_blksize; - long st_blocks; - long st_pad4[14]; + time_t st_atime; + long reserved0; + time_t st_mtime; + long reserved1; + time_t st_ctime; + long reserved2; + long st_blksize; + long st_blocks; + long st_pad4[14]; }; #endif /* __MIPS__ */ @@ -128,24 +128,24 @@ struct stat { #if defined(__AVR32__) struct stat { - unsigned long st_dev; - unsigned long st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned long st_rdev; - unsigned long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; + unsigned long st_dev; + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned long st_rdev; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; }; #endif /* __AVR32__ */ diff --git a/include/ppc405.h b/include/ppc405.h index 08f10d27b2..a2503a93d2 100644 --- a/include/ppc405.h +++ b/include/ppc405.h @@ -570,6 +570,8 @@ #define SDR_ICTX0_STAT 0x40000000 #define SDR_ICTX1_STAT 0x20000000 +#define SDR_PINSTP 0x40 + /****************************************************************************** * Control ******************************************************************************/ diff --git a/include/ppc440.h b/include/ppc440.h index 51e6b9b28c..bc1d7aad73 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -148,7 +148,7 @@ #define sdrcfgd (SDR_DCR_BASE+0x1) #define sdr_sdstp0 0x0020 /* */ #define sdr_sdstp1 0x0021 /* */ -#define sdr_pinstp 0x0040 +#define SDR_PINSTP 0x0040 #define sdr_sdcs 0x0060 #define sdr_ecid0 0x0080 #define sdr_ecid1 0x0081 diff --git a/lib_blackfin/Makefile b/lib_blackfin/Makefile index 3197fe1c90..a7aaef7a3c 100644 --- a/lib_blackfin/Makefile +++ b/lib_blackfin/Makefile @@ -1,7 +1,7 @@ # # U-boot Makefile # -# Copyright (c) 2005 blackfin.uclinux.org +# Copyright (c) 2005-2007 Analog Devices Inc. # # (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +# MA 02110-1301 USA # include $(TOPDIR)/config.mk diff --git a/lib_blackfin/bf533_linux.c b/lib_blackfin/bf533_linux.c index 1b0d90ae67..3b9c4df988 100644 --- a/lib_blackfin/bf533_linux.c +++ b/lib_blackfin/bf533_linux.c @@ -1,7 +1,7 @@ /* * U-boot - bf533_linux.c * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ /* Dummy functions, currently not in Use */ diff --git a/lib_blackfin/bf533_string.c b/lib_blackfin/bf533_string.c index 85b115076a..1553f1b5ac 100644 --- a/lib_blackfin/bf533_string.c +++ b/lib_blackfin/bf533_string.c @@ -1,7 +1,7 @@ /* * U-boot - bf533_string.c Contains library routines. * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,22 +21,16 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> #include <asm/setup.h> -#include <asm/page.h> #include <config.h> #include <asm/blackfin.h> #include <asm/io.h> - -extern void blackfin_icache_flush_range(const void *, const void *); -extern void blackfin_dcache_flush_range(const void *, const void *); -extern void *memcpy_ASM(void *dest, const void *src, size_t count); - -void *dma_memcpy(void *, const void *, size_t); +#include "cache.h" char *strcpy(char *dest, const char *src) { @@ -118,44 +112,7 @@ int strncmp(const char *cs, const char *ct, size_t count) return __res1; } -/* - * memcpy - Copy one area of memory to another - * @dest: Where to copy to - * @src: Where to copy from - * @count: The size of the area. - * - * You should not use this function to access IO space, use memcpy_toio() - * or memcpy_fromio() instead. - */ -void *memcpy(void *dest, const void *src, size_t count) -{ - char *tmp = (char *)dest, *s = (char *)src; - - /* L1_ISRAM can only be accessed via dma */ - if ((tmp >= (char *)L1_ISRAM) && (tmp < (char *)L1_ISRAM_END)) { - /* L1 is the destination */ - dma_memcpy(dest, src, count); - - if (icache_status()) { - blackfin_icache_flush_range(src, src + count); - } - } else if ((s >= (char *)L1_ISRAM) && (s < (char *)L1_ISRAM_END)) { - /* L1 is the source */ - dma_memcpy(dest, src, count); - - if (icache_status()) { - blackfin_icache_flush_range(dest, dest + count); - } - if (dcache_status()) { - blackfin_dcache_flush_range(dest, dest + count); - } - } else { - memcpy_ASM(dest, src, count); - } - return dest; -} - -void *dma_memcpy(void *dest, const void *src, size_t count) +static void *dma_memcpy(void *dest, const void *src, size_t count) { *pMDMA_D0_IRQ_STATUS = DMA_DONE | DMA_ERR; @@ -189,3 +146,40 @@ void *dma_memcpy(void *dest, const void *src, size_t count) src += count; return dest; } + +/* + * memcpy - Copy one area of memory to another + * @dest: Where to copy to + * @src: Where to copy from + * @count: The size of the area. + * + * You should not use this function to access IO space, use memcpy_toio() + * or memcpy_fromio() instead. + */ +extern void *memcpy_ASM(void *dest, const void *src, size_t count); +void *memcpy(void *dest, const void *src, size_t count) +{ + char *tmp = (char *) dest, *s = (char *) src; + + if (dcache_status()) { + blackfin_dcache_flush_range(src, src+count); + } + /* L1_ISRAM can only be accessed via dma */ + if ((tmp >= (char *)L1_ISRAM) && (tmp < (char *)L1_ISRAM_END)) { + /* L1 is the destination */ + dma_memcpy(dest,src,count); + } else if ((s >= (char *)L1_ISRAM) && (s < (char *)L1_ISRAM_END)) { + /* L1 is the source */ + dma_memcpy(dest,src,count); + + if (icache_status()) { + blackfin_icache_flush_range(dest, dest+count); + } + if (dcache_status()) { + blackfin_dcache_invalidate_range(dest, dest+count); + } + } else { + memcpy_ASM(dest,src,count); + } + return dest; +} diff --git a/lib_blackfin/blackfin_board.h b/lib_blackfin/blackfin_board.h index e0b96da875..1353421c33 100644 --- a/lib_blackfin/blackfin_board.h +++ b/lib_blackfin/blackfin_board.h @@ -1,7 +1,7 @@ /* * U-boot - blackfin_board.h * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #ifndef __BLACKFIN_BOARD_H__ diff --git a/lib_blackfin/board.c b/lib_blackfin/board.c index 1a0a2826c0..1538da3f29 100644 --- a/lib_blackfin/board.c +++ b/lib_blackfin/board.c @@ -1,7 +1,7 @@ /* * U-boot - board.c First C file to be called contains init routines * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,8 +21,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ #include <common.h> @@ -182,7 +182,7 @@ void init_cplbtables(void) icplb_table[j][1] = L1_IMEMORY; j++; - for (i = 0; i <= CONFIG_MEM_SIZE / 4; i++) { + for (i = 0; i < CONFIG_MEM_SIZE / 4; i++) { icplb_table[j][0] = (i * 4 * 1024 * 1024); if (i * 4 * 1024 * 1024 <= CFG_MONITOR_BASE && (i + 1) * 4 * 1024 * 1024 >= CFG_MONITOR_BASE) { @@ -193,14 +193,19 @@ void init_cplbtables(void) j++; } #if defined(CONFIG_BF561) + /* MAC space */ + icplb_table[j][0] = 0x2C000000; + icplb_table[j][1] = SDRAM_INON_CHBL; + j++; /* Async Memory space */ for (i = 0; i < 3; i++) { - icplb_table[j++][0] = 0x20000000 + i * 4 * 1024 * 1024; - icplb_table[j++][1] = SDRAM_IGENERIC; + icplb_table[j][0] = 0x20000000 + i * 4 * 1024 * 1024; + icplb_table[j][1] = SDRAM_INON_CHBL; + j++; } #else icplb_table[j][0] = 0x20000000; - icplb_table[j][1] = SDRAM_IGENERIC; + icplb_table[j][1] = SDRAM_INON_CHBL; #endif j = 0; dcplb_table[j][0] = 0xFF800000; @@ -220,13 +225,15 @@ void init_cplbtables(void) #if defined(CONFIG_BF561) /* MAC space */ - dcplb_table[j++][0] = CONFIG_ASYNC_EBIU_BASE; - dcplb_table[j++][1] = SDRAM_EBIU; + dcplb_table[j][0] = 0x2C000000; + dcplb_table[j][1] = SDRAM_EBIU; + j++; /* Flash space */ - for (i = 0; i < 2; i++) { - dcplb_table[j++][0] = 0x20000000 + i * 4 * 1024 * 1024; - dcplb_table[j++][1] = SDRAM_EBIU; + for (i = 0; i < 3; i++) { + dcplb_table[j][0] = 0x20000000 + i * 4 * 1024 * 1024; + dcplb_table[j][1] = SDRAM_EBIU; + j++; } #else dcplb_table[j][0] = 0x20000000; diff --git a/lib_blackfin/cache.c b/lib_blackfin/cache.c index a15914b109..9d71bcb547 100644 --- a/lib_blackfin/cache.c +++ b/lib_blackfin/cache.c @@ -1,7 +1,7 @@ /* * U-boot - cache.c * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -21,17 +21,15 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ /* for now: just dummy functions to satisfy the linker */ #include <config.h> #include <common.h> #include <asm/blackfin.h> - -extern void blackfin_icache_flush_range(unsigned long, unsigned long); -extern void blackfin_dcache_flush_range(unsigned long, unsigned long); +#include "cache.h" void flush_cache(unsigned long dummy1, unsigned long dummy2) { @@ -43,9 +41,9 @@ void flush_cache(unsigned long dummy1, unsigned long dummy2) return; if (icache_status()) - blackfin_icache_flush_range(dummy1, dummy1 + dummy2); + blackfin_icache_flush_range((void*)dummy1, (void*)(dummy1 + dummy2)); if (dcache_status()) - blackfin_dcache_flush_range(dummy1, dummy1 + dummy2); + blackfin_dcache_flush_range((void*)dummy1, (void*)(dummy1 + dummy2)); return; } diff --git a/lib_blackfin/cache.h b/lib_blackfin/cache.h new file mode 100644 index 0000000000..3ea6809d31 --- /dev/null +++ b/lib_blackfin/cache.h @@ -0,0 +1,35 @@ +/* + * U-boot - prototypes for cache handling functions. + * + * Copyright (c) 2005-2007 Analog Devices Inc. + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _LIB_BLACKFIN_CACHE_H_ +#define _LIB_BLACKFIN_CACHE_H_ + +extern void blackfin_icache_flush_range(const void *, const void *); +extern void blackfin_dcache_flush_range(const void *, const void *); +extern void blackfin_dcache_invalidate_range(const void *, const void *); + +#endif diff --git a/lib_blackfin/memcmp.S b/lib_blackfin/memcmp.S index fcea5b3daf..9b58832943 100644 --- a/lib_blackfin/memcmp.S +++ b/lib_blackfin/memcmp.S @@ -1,17 +1,8 @@ /* - * File: arch/blackfin/lib/memcmp.S - * Based on: - * Author: + * File: memcmp.S * - * Created: - * Description: - * - * Rev: $Id: memcmp.S 2386 2006-11-01 04:57:26Z magicyang $ - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * Copyright 2004-2007 Analog Devices Inc. + * Enter bugs at http://blackfin.uclinux.org/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/lib_blackfin/memcpy.S b/lib_blackfin/memcpy.S index a73ff90712..24577bebdc 100644 --- a/lib_blackfin/memcpy.S +++ b/lib_blackfin/memcpy.S @@ -1,22 +1,8 @@ /* - * File: arch/blackfin/lib/memcpy.S - * Based on: - * Author: + * File: memcpy.S * - * Created: - * Description: internal version of memcpy(), issued by the compiler - * to copy blocks of data around. - * This is really memmove() - it has to be able to deal with - * possible overlaps, because that ambiguity is when the compiler - * gives up and calls a function. We have our own, internal version - * so that we get something we trust, even if the user has redefined - * the normal symbol. - * Rev: $Id: memcpy.S 2775 2007-02-21 13:58:44Z hennerich $ - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * Copyright 2004-2007 Analog Devices Inc. + * Enter bugs at http://blackfin.uclinux.org/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -33,6 +19,7 @@ * to the Free Software Foundation, Inc., * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ + .align 2 .globl _memcpy_ASM; diff --git a/lib_blackfin/memmove.S b/lib_blackfin/memmove.S index 79558f951e..46f79ed18d 100644 --- a/lib_blackfin/memmove.S +++ b/lib_blackfin/memmove.S @@ -1,17 +1,8 @@ /* - * File: arch/blackfin/lib/memmove.S - * Based on: - * Author: + * File: memmove.S * - * Created: - * Description: - * - * Rev: $Id: memmove.S 2205 2006-09-23 07:53:49Z vapier $ - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * Copyright 2004-2007 Analog Devices Inc. + * Enter bugs at http://blackfin.uclinux.org/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/lib_blackfin/memset.S b/lib_blackfin/memset.S index 7e6ee198eb..c33c551121 100644 --- a/lib_blackfin/memset.S +++ b/lib_blackfin/memset.S @@ -1,17 +1,8 @@ /* - * File: arch/blackfin/lib/memset.S - * Based on: - * Author: + * File: memset.S * - * Created: - * Description: - * - * Rev: $Id: memset.S 2769 2007-02-19 16:45:53Z hennerich $ - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * Copyright 2004-2007 Analog Devices Inc. + * Enter bugs at http://blackfin.uclinux.org/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -29,7 +20,6 @@ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ - .align 2 /* diff --git a/lib_blackfin/muldi3.c b/lib_blackfin/muldi3.c index da55711dd7..bf1ca535fa 100644 --- a/lib_blackfin/muldi3.c +++ b/lib_blackfin/muldi3.c @@ -1,7 +1,7 @@ /* * U-boot - muldi3.c contains routines for mult and div * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Devices Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -18,8 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA */ /* Generic function got from GNU gcc package, libgcc2.c */ @@ -55,6 +55,7 @@ extern int skge_initialize(bd_t*); extern int tsec_initialize(bd_t*, int, char *); extern int npe_initialize(bd_t *); extern int uec_initialize(int); +extern int bfin_EMAC_initialize(bd_t *); extern int atstk1000_eth_initialize(bd_t *); static struct eth_device *eth_devices, *eth_current; @@ -256,6 +257,9 @@ int eth_initialize(bd_t *bis) #if defined(CONFIG_RTL8169) rtl8169_initialize(bis); #endif +#if defined(CONFIG_BF537) + bfin_EMAC_initialize(bis); +#endif #if defined(CONFIG_ATSTK1000) atstk1000_eth_initialize(bis); #endif |
