diff options
24 files changed, 247 insertions, 155 deletions
diff --git a/arch/arm/cpu/armv7/exynos/spl_boot.c b/arch/arm/cpu/armv7/exynos/spl_boot.c index bc237c969f..c7f943eb6a 100644 --- a/arch/arm/cpu/armv7/exynos/spl_boot.c +++ b/arch/arm/cpu/armv7/exynos/spl_boot.c @@ -309,4 +309,3 @@ void board_init_r(gd_t *id, ulong dest_addr) while (1) ; } -void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) {} diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S index 86c0e42174..e19c7aecec 100644 --- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S @@ -19,7 +19,7 @@ ENTRY(save_boot_params) ldr r1, =OMAP_SRAM_SCRATCH_BOOT_PARAMS str r0, [r1] - bx lr + b save_boot_params_ret ENDPROC(save_boot_params) ENTRY(set_pl310_ctrl_reg) diff --git a/arch/arm/cpu/armv7/omap3/lowlevel_init.S b/arch/arm/cpu/armv7/omap3/lowlevel_init.S index 78577b1d1c..80cb2639f6 100644 --- a/arch/arm/cpu/armv7/omap3/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap3/lowlevel_init.S @@ -23,7 +23,7 @@ ENTRY(save_boot_params) ldr r5, [r0, #0x4] and r5, r5, #0xff str r5, [r4] - bx lr + b save_boot_params_ret ENDPROC(save_boot_params) #endif diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 70048c10ae..9b49ece2d6 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -31,9 +31,12 @@ *************************************************************************/ .globl reset + .globl save_boot_params_ret reset: - bl save_boot_params + /* Allow the board to save important registers */ + b save_boot_params +save_boot_params_ret: /* * disable interrupts (FIQ and IRQ), also set the cpu to SVC32 mode, * except if in HYP mode already @@ -96,7 +99,7 @@ ENDPROC(c_runtime_cpu_setup) * *************************************************************************/ ENTRY(save_boot_params) - bx lr @ back to my caller + b save_boot_params_ret @ back to my caller ENDPROC(save_boot_params) .weak save_boot_params diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile index 48db7442f4..4bb12ad8bd 100644 --- a/arch/arm/cpu/armv7/sunxi/Makefile +++ b/arch/arm/cpu/armv7/sunxi/Makefile @@ -11,6 +11,7 @@ obj-y += timer.o obj-y += board.o obj-y += clock.o obj-y += cpu_info.o +obj-y += dram_helpers.o obj-y += pinmux.o obj-y += usbc.o obj-$(CONFIG_MACH_SUN6I) += prcm.o @@ -38,7 +39,5 @@ obj-$(CONFIG_MACH_SUN5I) += dram_sun4i.o obj-$(CONFIG_MACH_SUN6I) += dram_sun6i.o obj-$(CONFIG_MACH_SUN7I) += dram_sun4i.o obj-$(CONFIG_MACH_SUN8I) += dram_sun8i.o -ifdef CONFIG_SPL_FEL -obj-y += start.o -endif +obj-y += fel_utils.o endif diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c index 6e28bcd040..c02c015096 100644 --- a/arch/arm/cpu/armv7/sunxi/board.c +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -27,6 +27,17 @@ #include <linux/compiler.h> +struct fel_stash { + uint32_t sp; + uint32_t lr; + uint32_t cpsr; + uint32_t sctlr; + uint32_t vbar; + uint32_t cr; +}; + +struct fel_stash fel_stash __attribute__((section(".data"))); + static int gpio_init(void) { #if CONFIG_CONS_INDEX == 1 && defined(CONFIG_UART0_PORT_F) @@ -65,6 +76,12 @@ static int gpio_init(void) return 0; } +void spl_board_load_image(void) +{ + debug("Returning to FEL sp=%x, lr=%x\n", fel_stash.sp, fel_stash.lr); + return_to_fel(fel_stash.sp, fel_stash.lr); +} + void s_init(void) { #if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I @@ -95,7 +112,34 @@ void s_init(void) */ u32 spl_boot_device(void) { - return BOOT_DEVICE_MMC1; +#ifdef CONFIG_SPL_FEL + /* + * This is the legacy compile time configuration for a special FEL + * enabled build. It has many restrictions and can only boot over USB. + */ + return BOOT_DEVICE_BOARD; +#else + /* + * When booting from the SD card, the "eGON.BT0" signature is expected + * to be found in memory at the address 0x0004 (see the "mksunxiboot" + * tool, which generates this header). + * + * When booting in the FEL mode over USB, this signature is patched in + * memory and replaced with something else by the 'fel' tool. This other + * signature is selected in such a way, that it can't be present in a + * valid bootable SD card image (because the BROM would refuse to + * execute the SPL in this case). + * + * This branch is just making a decision at runtime whether to load + * the main u-boot binary from the SD card (if the "eGON.BT0" signature + * is found) or return to the FEL code in the BROM to wait and receive + * the main u-boot binary over USB. + */ + if (readl(4) == 0x4E4F4765 && readl(8) == 0x3054422E) /* eGON.BT0 */ + return BOOT_DEVICE_MMC1; + else + return BOOT_DEVICE_BOARD; +#endif } /* No confirmation data available in SPL yet. Hardcode bootmode */ diff --git a/arch/arm/cpu/armv7/sunxi/config.mk b/arch/arm/cpu/armv7/sunxi/config.mk index 00f5ffc683..76ffec9df6 100644 --- a/arch/arm/cpu/armv7/sunxi/config.mk +++ b/arch/arm/cpu/armv7/sunxi/config.mk @@ -1,8 +1,6 @@ # Build a combined spl + u-boot image ifdef CONFIG_SPL ifndef CONFIG_SPL_BUILD -ifndef CONFIG_SPL_FEL ALL-y += u-boot-sunxi-with-spl.bin endif endif -endif diff --git a/arch/arm/cpu/armv7/sunxi/dram_helpers.c b/arch/arm/cpu/armv7/sunxi/dram_helpers.c new file mode 100644 index 0000000000..9a94e1b679 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/dram_helpers.c @@ -0,0 +1,37 @@ +/* + * DRAM init helper functions + * + * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/dram.h> + +/* + * Wait up to 1s for value to be set in given part of reg. + */ +void mctl_await_completion(u32 *reg, u32 mask, u32 val) +{ + unsigned long tmo = timer_get_us() + 1000000; + + while ((readl(reg) & mask) != val) { + if (timer_get_us() > tmo) + panic("Timeout initialising DRAM\n"); + } +} + +/* + * Test if memory at offset offset matches memory at begin of DRAM + */ +bool mctl_mem_matches(u32 offset) +{ + /* Try to write different values to RAM at two addresses */ + writel(0, CONFIG_SYS_SDRAM_BASE); + writel(0xaa55aa55, CONFIG_SYS_SDRAM_BASE + offset); + /* Check if the same value is actually observed when reading back */ + return readl(CONFIG_SYS_SDRAM_BASE) == + readl(CONFIG_SYS_SDRAM_BASE + offset); +} diff --git a/arch/arm/cpu/armv7/sunxi/fel_utils.S b/arch/arm/cpu/armv7/sunxi/fel_utils.S new file mode 100644 index 0000000000..bf0033552d --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/fel_utils.S @@ -0,0 +1,42 @@ +/* + * Utility functions for FEL mode. + * + * Copyright (c) 2015 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm-offsets.h> +#include <config.h> +#include <asm/system.h> +#include <linux/linkage.h> + +ENTRY(save_boot_params) + ldr r0, =fel_stash + str sp, [r0, #0] + str lr, [r0, #4] + mrs lr, cpsr @ Read CPSR + str lr, [r0, #8] + mrc p15, 0, lr, c1, c0, 0 @ Read CP15 SCTLR Register + str lr, [r0, #12] + mrc p15, 0, lr, c12, c0, 0 @ Read VBAR + str lr, [r0, #16] + mrc p15, 0, lr, c1, c0, 0 @ Read CP15 Control Register + str lr, [r0, #20] + b save_boot_params_ret +ENDPROC(save_boot_params) + +ENTRY(return_to_fel) + mov sp, r0 + mov lr, r1 + ldr r0, =fel_stash + ldr r1, [r0, #20] + mcr p15, 0, r1, c1, c0, 0 @ Write CP15 Control Register + ldr r1, [r0, #16] + mcr p15, 0, r1, c12, c0, 0 @ Write VBAR + ldr r1, [r0, #12] + mcr p15, 0, r1, c1, c0, 0 @ Write CP15 SCTLR Register + ldr r1, [r0, #8] + msr cpsr, r1 @ Write CPSR + bx lr +ENDPROC(return_to_fel) diff --git a/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds b/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds deleted file mode 100644 index 928b7c19e0..0000000000 --- a/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2013 - * Henrik Nordstrom <henrik@henriknordstrom.net> - * - * SPDX-License-Identifier: GPL-2.0+ - */ -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -ENTRY(s_init) -SECTIONS -{ - . = 0x00002000; - - . = ALIGN(4); - .text : - { - *(.text.s_init) - *(.text*) - } - - . = ALIGN(4); - .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } - - . = ALIGN(4); - .data : { - *(.data*) - } - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - . = ALIGN(4); - . = .; - - . = ALIGN(4); - .rel.dyn : { - __rel_dyn_start = .; - *(.rel*) - __rel_dyn_end = .; - } - - .dynsym : { - __dynsym_start = .; - *(.dynsym) - } - - . = ALIGN(4); - .note.gnu.build-id : - { - *(.note.gnu.build-id) - } - _end = .; - - . = ALIGN(4096); - .mmutable : { - *(.mmutable) - } - - .bss_start __rel_dyn_start (OVERLAY) : { - KEEP(*(.__bss_start)); - __bss_base = .; - } - - .bss __bss_base (OVERLAY) : { - *(.bss*) - . = ALIGN(4); - __bss_limit = .; - } - - .bss_end __bss_limit (OVERLAY) : { - KEEP(*(.__bss_end)); - } - - /DISCARD/ : { *(.dynstr*) } - /DISCARD/ : { *(.dynamic*) } - /DISCARD/ : { *(.plt*) } - /DISCARD/ : { *(.interp*) } - /DISCARD/ : { *(.gnu*) } - /DISCARD/ : { *(.note*) } -} diff --git a/arch/arm/include/asm/arch-sunxi/dram.h b/arch/arm/include/asm/arch-sunxi/dram.h index 7ff43e6d3a..aedd1941d5 100644 --- a/arch/arm/include/asm/arch-sunxi/dram.h +++ b/arch/arm/include/asm/arch-sunxi/dram.h @@ -25,31 +25,7 @@ #endif unsigned long sunxi_dram_init(void); - -/* - * Wait up to 1s for value to be set in given part of reg. - */ -static inline void mctl_await_completion(u32 *reg, u32 mask, u32 val) -{ - unsigned long tmo = timer_get_us() + 1000000; - - while ((readl(reg) & mask) != val) { - if (timer_get_us() > tmo) - panic("Timeout initialising DRAM\n"); - } -} - -/* - * Test if memory at offset offset matches memory at begin of DRAM - */ -static inline bool mctl_mem_matches(u32 offset) -{ - /* Try to write different values to RAM at two addresses */ - writel(0, CONFIG_SYS_SDRAM_BASE); - writel(0xaa55aa55, CONFIG_SYS_SDRAM_BASE + offset); - /* Check if the same value is actually observed when reading back */ - return readl(CONFIG_SYS_SDRAM_BASE) == - readl(CONFIG_SYS_SDRAM_BASE + offset); -} +void mctl_await_completion(u32 *reg, u32 mask, u32 val); +bool mctl_mem_matches(u32 offset); #endif /* _SUNXI_DRAM_H */ diff --git a/arch/arm/include/asm/arch-sunxi/sys_proto.h b/arch/arm/include/asm/arch-sunxi/sys_proto.h index c3e636e1d9..60a5bd8c85 100644 --- a/arch/arm/include/asm/arch-sunxi/sys_proto.h +++ b/arch/arm/include/asm/arch-sunxi/sys_proto.h @@ -13,4 +13,14 @@ void sdelay(unsigned long); +/* return_to_fel() - Return to BROM from SPL + * + * This returns back into the BROM after U-Boot SPL has performed its initial + * init. It uses the provided lr and sp to do so. + * + * @lr: BROM link register value (return address) + * @sp: BROM stack pointer + */ +void return_to_fel(uint32_t lr, uint32_t sp); + #endif diff --git a/arch/arm/include/asm/spl.h b/arch/arm/include/asm/spl.h index 8acd7cd1bd..17b6f544da 100644 --- a/arch/arm/include/asm/spl.h +++ b/arch/arm/include/asm/spl.h @@ -26,10 +26,14 @@ enum { BOOT_DEVICE_SPI, BOOT_DEVICE_SATA, BOOT_DEVICE_I2C, + BOOT_DEVICE_BOARD, BOOT_DEVICE_NONE }; #endif +/* Board-specific load method */ +void spl_board_load_image(void); + /* Linker symbols. */ extern char __bss_start[], __bss_end[]; diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 89f2294689..7820486df0 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -142,6 +142,21 @@ void flush_l3_cache(void); #ifndef __ASSEMBLY__ +/** + * save_boot_params() - Save boot parameters before starting reset sequence + * + * If you provide this function it will be called immediately U-Boot starts, + * both for SPL and U-Boot proper. + * + * All registers are unchanged from U-Boot entry. No registers need be + * preserved. + * + * This is not a normal C function. There is no stack. Return by branching to + * save_boot_params_ret. + * + * void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3); + */ + #define isb() __asm__ __volatile__ ("" : : : "memory") #define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t"); diff --git a/board/nokia/rx51/lowlevel_init.S b/board/nokia/rx51/lowlevel_init.S index e25290966c..9d4ea1b3f9 100644 --- a/board/nokia/rx51/lowlevel_init.S +++ b/board/nokia/rx51/lowlevel_init.S @@ -37,7 +37,8 @@ ih_magic: /* IH_MAGIC in big endian from include/image.h */ .global save_boot_params save_boot_params: - + /* Get return address */ + ldr lr, =save_boot_params_ret /* Copy valid attached kernel to address KERNEL_ADDRESS */ diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index 4a2158988f..3eab81fd12 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -149,6 +149,16 @@ config SPL_FEL bool "SPL/FEL mode support" depends on SPL default n + help + This enables support for Fast Early Loader (FEL) mode. This + allows U-Boot to be loaded to the board over USB by the on-chip + boot rom. U-Boot should be sent in two parts: SPL first, with + 'fel write 0x2000 u-boot-spl.bin; fel exe 0x2000' then U-Boot with + 'fel write 0x4a000000 u-boot.bin; fel exe 0x4a000000'. This option + shrinks the amount of SRAM available to SPL, so only enable it if + you need FEL. Note that enabling this option only allows FEL to be + used; it is still possible to boot U-Boot from boot media. U-Boot + SPL detects when it is being loaded using FEL. config UART0_PORT_F bool "UART0 on MicroSD breakout board" diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index faa413cb06..9a287d3c30 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -46,6 +46,11 @@ S: Maintained F: board/sunxi/dram_a20_olinuxino_l2.c F: configs/A20-OLinuXino-Lime2_defconfig +AMPE A76 BOARD +M: Paul Kocialkowski <contact@paulk.fr> +S: Maintained +F: configs/Ampe_A76_defconfig + COLOMBUS BOARD M: Maxime Ripard <maxime.ripard@free-electrons.com> S: Maintained @@ -57,9 +62,7 @@ M: Hans de Goede <hdegoede@redhat.com> S: Maintained F: include/configs/sun7i.h F: configs/Cubieboard2_defconfig -F: configs/Cubieboard2_FEL_defconfig F: configs/Cubietruck_defconfig -F: configs/Cubietruck_FEL_defconfig GEMEI-G9 TABLET M: Priit Laes <plaes@plaes.org> diff --git a/common/spl/spl.c b/common/spl/spl.c index daaeb507c4..ded0f30478 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -229,6 +229,11 @@ void board_init_r(gd_t *dummy1, ulong dummy2) spl_sata_load_image(); break; #endif +#ifdef CONFIG_SPL_BOARD_LOAD_IMAGE + case BOOT_DEVICE_BOARD: + spl_board_load_image(); + break; +#endif default: #if defined(CONFIG_SPL_SERIAL_SUPPORT) && defined(CONFIG_SPL_LIBCOMMON_SUPPORT) puts("SPL: Unsupported Boot Device!\n"); diff --git a/configs/Ampe_A76_defconfig b/configs/Ampe_A76_defconfig new file mode 100644 index 0000000000..2054fc3c96 --- /dev/null +++ b/configs/Ampe_A76_defconfig @@ -0,0 +1,15 @@ +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER" +CONFIG_FDTFILE="sun5i-a13-ampe-a76.dtb" +CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB0_VBUS_PIN="PG12" +CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:45,ri:82,up:22,lo:22,hs:1,vs:1,sync:3,vmode:0" +CONFIG_VIDEO_LCD_POWER="AXP0-0" +CONFIG_VIDEO_LCD_BL_EN="AXP0-1" +CONFIG_VIDEO_LCD_BL_PWM="PB2" ++S:CONFIG_ARM=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN5I=y ++S:CONFIG_DRAM_CLK=432 ++S:CONFIG_DRAM_ZQ=123 ++S:CONFIG_DRAM_EMR1=4 diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c index 778916df00..4646a3d9fe 100644 --- a/drivers/usb/musb-new/sunxi.c +++ b/drivers/usb/musb-new/sunxi.c @@ -145,16 +145,6 @@ static void USBC_ForceIdToHigh(__iomem void *base) musb_writel(base, USBC_REG_o_ISCR, reg_val); } -static void USBC_ForceVbusValidDisable(__iomem void *base) -{ - u32 reg_val; - - reg_val = musb_readl(base, USBC_REG_o_ISCR); - reg_val &= ~(0x03 << USBC_BP_ISCR_FORCE_VBUS_VALID); - reg_val = USBC_WakeUp_ClearChangeDetect(reg_val); - musb_writel(base, USBC_REG_o_ISCR, reg_val); -} - static void USBC_ForceVbusValidToHigh(__iomem void *base) { u32 reg_val; @@ -248,12 +238,11 @@ static int sunxi_musb_init(struct musb *musb) if (is_host_enabled(musb)) { /* Host mode */ USBC_ForceIdToLow(musb->mregs); - USBC_ForceVbusValidToHigh(musb->mregs); } else { /* Peripheral mode */ USBC_ForceIdToHigh(musb->mregs); - USBC_ForceVbusValidDisable(musb->mregs); } + USBC_ForceVbusValidToHigh(musb->mregs); return 0; } diff --git a/drivers/video/sunxi_display.c b/drivers/video/sunxi_display.c index f5f24fc020..dbda97e746 100644 --- a/drivers/video/sunxi_display.c +++ b/drivers/video/sunxi_display.c @@ -46,6 +46,7 @@ struct sunxi_display { GraphicDevice graphic_device; enum sunxi_monitor monitor; unsigned int depth; + unsigned int fb_size; } sunxi_display; #ifdef CONFIG_VIDEO_HDMI @@ -1060,6 +1061,11 @@ static const char *sunxi_get_mon_desc(enum sunxi_monitor monitor) return NULL; /* never reached */ } +ulong board_get_usable_ram_top(ulong total_size) +{ + return gd->ram_top - CONFIG_SUNXI_MAX_FB_SIZE; +} + void *video_hw_init(void) { static GraphicDevice *graphic_device = &sunxi_display.graphic_device; @@ -1075,10 +1081,6 @@ void *video_hw_init(void) memset(&sunxi_display, 0, sizeof(struct sunxi_display)); - printf("Reserved %dkB of RAM for Framebuffer.\n", - CONFIG_SUNXI_FB_SIZE >> 10); - gd->fb_base = gd->ram_top; - video_get_ctfb_res_modes(RES_MODE_1024x768, 24, &mode, &sunxi_display.depth, &options); #ifdef CONFIG_VIDEO_HDMI @@ -1169,6 +1171,17 @@ void *video_hw_init(void) mode->yres, sunxi_get_mon_desc(sunxi_display.monitor)); } + sunxi_display.fb_size = + (mode->xres * mode->yres * 4 + 0xfff) & ~0xfff; + if (sunxi_display.fb_size > CONFIG_SUNXI_MAX_FB_SIZE) { + printf("Error need %dkB for fb, but only %dkB is reserved\n", + sunxi_display.fb_size >> 10, + CONFIG_SUNXI_MAX_FB_SIZE >> 10); + return NULL; + } + + gd->fb_base = gd->bd->bi_dram[0].start + + gd->bd->bi_dram[0].size - sunxi_display.fb_size; sunxi_engines_init(); sunxi_mode_set(mode, gd->fb_base - CONFIG_SYS_SDRAM_BASE); @@ -1194,6 +1207,7 @@ int sunxi_simplefb_setup(void *blob) { static GraphicDevice *graphic_device = &sunxi_display.graphic_device; int offset, ret; + u64 start, size; const char *pipeline = NULL; #ifdef CONFIG_MACH_SUN4I @@ -1237,6 +1251,20 @@ int sunxi_simplefb_setup(void *blob) return 0; /* Keep older kernels working */ } + /* + * Do not report the framebuffer as free RAM to the OS, note we cannot + * use fdt_add_mem_rsv() here, because then it is still seen as RAM, + * and e.g. Linux refuses to iomap RAM on ARM, see: + * linux/arch/arm/mm/ioremap.c around line 301. + */ + start = gd->bd->bi_dram[0].start; + size = gd->bd->bi_dram[0].size - sunxi_display.fb_size; + ret = fdt_fixup_memory_banks(blob, &start, &size, 1); + if (ret) { + eprintf("Cannot setup simplefb: Error reserving memory\n"); + return ret; + } + ret = fdt_setup_simplefb_node(blob, offset, gd->fb_base, graphic_device->winSizeX, graphic_device->winSizeY, graphic_device->winSizeX * graphic_device->gdfBytesPP, diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 09889eeb44..5e8885277f 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -18,10 +18,8 @@ */ #define CONFIG_SUNXI /* sunxi family */ #ifdef CONFIG_SPL_BUILD -#ifndef CONFIG_SPL_FEL #define CONFIG_SYS_THUMB_BUILD /* Thumbs mode to save space in SPL */ #endif -#endif #include <asm/arch/cpu.h> /* get chip and board defs */ @@ -145,10 +143,10 @@ #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_BOARD_LOAD_IMAGE + #ifdef CONFIG_SPL_FEL -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds" -#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/armv7/sunxi" #define CONFIG_SPL_TEXT_BASE 0x2000 #define CONFIG_SPL_MAX_SIZE 0x4000 /* 16 KiB */ @@ -206,10 +204,10 @@ #ifdef CONFIG_VIDEO /* - * The amount of RAM that is reserved for the FB. This will not show up as - * RAM to the kernel, but will be reclaimed by a KMS driver in future. + * The amount of RAM to keep free at the top of RAM when relocating u-boot, + * to use as framebuffer. This must be a multiple of 4096. */ -#define CONFIG_SUNXI_FB_SIZE (9 << 20) +#define CONFIG_SUNXI_MAX_FB_SIZE (9 << 20) /* Do we want to initialize a simple FB? */ #define CONFIG_VIDEO_DT_SIMPLEFB @@ -227,8 +225,6 @@ /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */ #define CONFIG_VGA_AS_SINGLE_DEVICE -#define CONFIG_SYS_MEM_TOP_HIDE ((CONFIG_SUNXI_FB_SIZE + 0xFFF) & ~0xFFF) - /* To be able to hook simplefb into dt */ #ifdef CONFIG_VIDEO_DT_SIMPLEFB #define CONFIG_OF_BOARD_SETUP diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl index e4b9881186..cc189adc0c 100644 --- a/scripts/Makefile.spl +++ b/scripts/Makefile.spl @@ -154,10 +154,8 @@ ALL-y += $(obj)/$(BOARD)-spl.bin endif ifdef CONFIG_SUNXI -ifndef CONFIG_SPL_FEL ALL-y += $(obj)/sunxi-spl.bin endif -endif ifeq ($(CONFIG_SYS_SOC),"at91") ALL-y += boot.bin diff --git a/tools/mksunxiboot.c b/tools/mksunxiboot.c index 1f0fbae8e1..0035f6ea26 100644 --- a/tools/mksunxiboot.c +++ b/tools/mksunxiboot.c @@ -43,19 +43,19 @@ int gen_check_sum(struct boot_file_head *head_p) uint32_t i; uint32_t sum; - length = head_p->length; + length = le32_to_cpu(head_p->length); if ((length & 0x3) != 0) /* must 4-byte-aligned */ return -1; buf = (uint32_t *)head_p; - head_p->check_sum = STAMP_VALUE; /* fill stamp */ + head_p->check_sum = cpu_to_le32(STAMP_VALUE); /* fill stamp */ loop = length >> 2; /* calculate the sum */ for (i = 0, sum = 0; i < loop; i++) - sum += buf[i]; + sum += le32_to_cpu(buf[i]); /* write back check sum */ - head_p->check_sum = sum; + head_p->check_sum = cpu_to_le32(sum); return 0; } @@ -125,10 +125,12 @@ int main(int argc, char *argv[]) memcpy(img.header.magic, BOOT0_MAGIC, 8); /* no '0' termination */ img.header.length = ALIGN(file_size + sizeof(struct boot_file_head), BLOCK_SIZE); + img.header.b_instruction = cpu_to_le32(img.header.b_instruction); + img.header.length = cpu_to_le32(img.header.length); gen_check_sum(&img.header); - count = write(fd_out, &img, img.header.length); - if (count != img.header.length) { + count = write(fd_out, &img, le32_to_cpu(img.header.length)); + if (count != le32_to_cpu(img.header.length)) { perror("Writing output"); return EXIT_FAILURE; } |
