diff options
57 files changed, 1020 insertions, 415 deletions
@@ -1,3 +1,328 @@ +commit e881cb563e32f45832b7b6db77bdcd017adcbb41 +Author: Bruce Adler <bruce.adler@ccpu.com> +Date: Fri Nov 2 13:15:42 2007 -0700 + + fix wording in README + + Changed the wording to properly describe the shadowing + of the environment from ROM to RAM + + Signed-off-by: Bruce Adler <bruce.adler@acm.org> + +commit ad845beef06245426c57b53dcdc01b7dc70e0d45 +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Wed Oct 31 02:18:15 2007 +0900 + + blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit ec22755799466c8a103664bb3a5e647bf9c238f4 +Author: Vlad Lungu <vlad@comsys.ro> +Date: Thu Oct 25 16:08:14 2007 +0300 + + Trimmed some variables in ne2000.c + + Signed-off-by: Vlad Lungu <vlad@comsys.ro> + +commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0 +Author: Zhang Wei <wei.zhang@freescale.com> +Date: Thu Oct 25 17:51:27 2007 +0800 + + Fix the issue of usb_kbd driver missing the scan code of key 'z'. + + The scan code of the key 'z' is 0x1d, which should be handled. + + The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI + controller. + + Signed-off-by: Zhang Wei <wei.zhang@freescale.com> + +commit bbf4796f6498fbade56d56eff3a0a49b299d93e5 +Author: Zhang Wei <wei.zhang@freescale.com> +Date: Thu Oct 25 17:30:04 2007 +0800 + + Fix USB support issue for MPC8641HPCN board. + + The configuration file has already enabled USB, but it + missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB + on MPC8641HPCN can not work because of the wrong USB + register endian. + + And add the USB command to U-Boot commands list. + + Signed-off-by: Zhang Wei <wei.zhang@freescale.com> + +commit 4e62041023dc3de9d98d977bb080235bc6d035e0 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Wed Oct 24 18:16:01 2007 +0200 + + Use config_cmd_default.h instead of config_cmd_all.h + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 56622f87857439b1c221e9deef11a9d5bb5d4308 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Oct 24 01:37:36 2007 +0200 + + TQM5200: Call usb_cpu_init() during board init + + usb_cpu_init() configures GPS USB pins, clocks, etc. and + is required for proper operation of kernel USB subsystem. + This setup was previously done in the kernel by the fixup + code which is being removed, thus low level init must be + done by U-boot now. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd +Author: Guennadi Liakhovetski <lg@denx.de> +Date: Tue Oct 23 16:25:50 2007 +0200 + + Fix typo in nfs.c + + An obvious typo. Originally fixed in linkstation u-boot port. + + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + +commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78 +Author: Guennadi Liakhovetski <lg@denx.de> +Date: Tue Oct 23 14:35:05 2007 +0200 + + Fix a typo in cpu/mpc824x/interrupts.c + + Since December 2003 the timer_interrupt_cpu() function in + cpu/mpc824x/interrupts.c contains what seems to be a superfluous + parameter. Remove it. + + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + +commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d +Author: Sergej Stepanov <Sergej.Stepanov@ids.de> +Date: Wed Oct 17 11:13:51 2007 +0200 + + add ft_cpu_setup(..) on mpc8260 + + Add ft_cpu_setup(..)-function to adapt it for use with libfdt + based on code from mpc5xxx + + Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de> + -- + +commit 6abd82e19ae93c0b4d104e50165e235915ec0875 +Author: Sergej Stepanov <Sergej.Stepanov@ids.de> +Date: Wed Oct 17 11:18:42 2007 +0200 + + changes for IDS8247 board support + + To get the IDS8247 board working following are done: + - FCC2 is deactivated + - FCC1 is activated + - I2C is activated + - CFI driver is activated + - Adapted for use with LIBFDT + + Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de> + -- + +commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c +Author: Haavard Skinnemoen <hskinnemoen@atmel.com> +Date: Wed Oct 24 15:48:37 2007 +0200 + + ATSTK1002: Remove default ethernet addresses + + Wolfgang is right: It's not a good idea to set up default initial + ethernet addresses for a board, even though they belong to the local + range. + + This will change the failure mode from "IT manager screams at you for + using duplicate ethernet addresses" to a nice error message explaining + that the ethernet address hasn't been set properly. + + Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> + +commit e5c794e491a57d829b6d8733e2ed8368a2269abf +Author: Justin Flammia <jflammia@savantav.com> +Date: Mon Oct 29 17:40:35 2007 -0400 + + DHCP Client Fix + + This is a multi-part message in MIME format. + + commit e6e505eae94ed721e123e177489291fc4544b7b8 + Author: Justin Flammia <jflammia@savantav.com> + Date: Mon Oct 29 17:19:03 2007 -0400 + + Found a bug in the way the DHCP Request packet is built, where the IP address + that is offered by the server is bound to prematurely. This patch is a fix of + that bug where the IP address offered by the DHCP server is not used until + after the DHCP ACK from the server is received. + + Signed-off-by: Justin Flammia <jflammia@savantav.com> + Signed-off-by: Ben Warren <bwarren@qstreams.com> + +commit e8ee8f3ade2a06c1893dd5e68f223070d650c7ed +Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> +Date: Thu Oct 25 17:16:22 2007 -0500 + + ColdFire 54455: Fix correct boot location for atmel and intel + + Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> + +commit 688e8eb414ac111cca7ce60bdf30e805ab9a7bcb +Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> +Date: Thu Oct 25 17:14:00 2007 -0500 + + ColdFire: Fix build error when CONFIG_WATCHDOG is defined + + Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> + +commit c67e12e705b204cfe914e3e3e693d69a445dcabf +Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> +Date: Thu Oct 25 17:12:36 2007 -0500 + + ColdFire 5329: Assign correct SDRAM size and fix cache + + Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> + +commit 95e9f2c212a65610b2e59a5c00d0113383a4da0b +Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> +Date: Thu Oct 25 17:10:23 2007 -0500 + + ColdFire 5253: Assign correct SDRAM size + + Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> + +commit 2acefa72ee0026f862ab65597ca687428f63a973 +Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com> +Date: Thu Oct 25 17:09:17 2007 -0500 + + ColdFire 5282: Fix external flash boot and return dramsize + + Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com> + +commit d78791ae914d4e7c5edca1cdad73b3dc81a4eb82 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Thu Oct 25 17:20:01 2007 +0200 + + TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk). + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 1a0ce20aa4cb4e3068da04e7290ee9986fd0b834 +Author: Martin Krause <martin.krause@tqs.de> +Date: Wed Oct 24 08:42:25 2007 +0200 + + TQM5200: fix spurious characters on second serial interface + + With this patch PSC3 is configured as UART. This is done, because if + the pins of PSC3 are not configured at all (-> all pins are GPI), + due to crosstalk, spurious characters may be send over the RX232_2_TXD + signal line. + + Signed-off-by: Martin Krause <martin.krause@tqs.de> + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit be4a87f11e297a5cededbf7dd71c0248f3874acd +Author: Martin Krause <martin.krause@tqs.de> +Date: Wed Oct 24 08:41:27 2007 +0200 + + TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller + + Some commands for the STK52xx base board try to access the SM501 grafic + controller. But the TQM5200S has no grafic controller (only the TQM5200 + and the TQM5200B have). This patch deactivates the commands accessing + the SM501 for the TQM5200S. + + Signed-off-by: Martin Krause <martin.krause@tqs.de> + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit b31f64343ead9482cd439b1adbe4c34026a641b1 +Author: Martin Krause <martin.krause@tqs.de> +Date: Mon Oct 22 16:45:53 2007 +0200 + + TQM5200: fix spurious characters on second serial interface + + With this patch PSC3 is configured as UART. This is done, because if + the pins of PSC3 are not configured at all (-> all pins are GPI), + due to crosstalk, spurious characters may be send over the RX232_2_TXD + signal line. + + Signed-off-by: Martin Krause <martin.krause@tqs.de> + +commit 0fc0f91b20ffa802f5a66534ca5c2844910583f6 +Author: Martin Krause <martin.krause@tqs.de> +Date: Mon Oct 22 16:40:06 2007 +0200 + + TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller + + Some commands for the STK52xx base board try to access the SM501 grafic + controller. But the TQM5200S has no grafic controller (only the TQM5200 + and the TQM5200B have). This patch deactivates the commands accessing + the SM501 for the TQM5200S. + + Signed-off-by: Martin Krause <martin.krause@tqs.de> + +commit 7b0a42219f30277f71f4405cbaf8a269f6d2d227 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Sun Oct 21 09:14:28 2007 +0200 + + Mips: Fix string functions differ prototype declaration + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit cb8250fe4b3c4ed549b270e8a20bc22060e7e1d2 +Author: Ed Swarthout <Ed.Swarthout@freescale.com> +Date: Fri Oct 19 17:51:40 2007 -0500 + + fsl_pci_init enable COMMAND_MEMORY if inbound window + + Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows + to pciauto_setup_device has the side effect of not getting + COMMAND_MEMORY set. + + Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> + +commit e9d0d527992566ebef9826962ff1745b2f082b92 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Fri Oct 19 10:55:24 2007 +0200 + + delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 9c4884f54da982ce990c7d1760ac81b0704d3c64 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Fri Oct 19 08:10:15 2007 +0200 + + fix warning: no return statement in function returning non-void + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit e78220f6e514206757acfe247297fc9a328a881f +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Fri Oct 19 06:33:45 2007 +0200 + + xsengine: Fix no partition type specified, use DOS as default + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 10cdb8dbd67a818823ab9ec88b68fc348903db59 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Fri Oct 19 00:24:59 2007 +0200 + + lubbock: Fix no partition type specified, use DOS as default + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 41b4d282d38fa7231c315c5f6cfff5bdd24e0191 +Author: Wolfgang Denk <wd@denx.de> +Date: Tue Oct 23 16:50:03 2007 +0200 + + Coding style: keep lists sorted; update CHANGELOG + + Signed-off-by: Wolfgang Denk <wd@denx.de> + commit 58b74b05c621e2835ecf4e2d3243042cf4186777 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Date: Fri Oct 19 00:09:05 2007 +0200 @@ -51,6 +376,112 @@ Date: Wed Oct 17 11:56:31 2007 -0500 are added to u-boot. Signed-off-by Rune Torgersen <runet@innovsys.com> +commit d3afa1ee19345a31fd1eaad3e98b97d13ca47315 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Tue Oct 23 13:14:10 2007 +0200 + + Motion-PRO: Update configuration to accomodate next generation board. + + New board has faster oscillator and a different Flash chip. This affects: + - CFG_MPC5XXX_CLKIN + - SDRAM timings + - Flash CS configuration (timings) + - Flash sector size, and thus MTD partition layout + - malloc() arena size (due to bigger Flash sectors) + - smaller memory test range (due to bigger malloc() arena) + + This patch also enables more extensive memory testing via "mtest". + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit eff501904df2bf1724a750062628ba2c51dbb1f8 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Tue Oct 23 11:36:07 2007 +0200 + + Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration. + + Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay + register must be written a value of 0x00000004 as the first step of the + SDRAM contorller configuration. + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 7a9348728ebda63cdbaacffd83099aa71d9d4c54 +Author: Peter Pearse <peter.pearse@arm.com> +Date: Tue Oct 23 10:22:16 2007 +0100 + + Move PL01* serial drivers to drivers/serial and adjust Makefiles. + +commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d +Author: Vlad Lungu <vlad@comsys.ro> +Date: Sun Oct 21 22:10:10 2007 +0900 + + [MIPS] Fix UNCACHED_SDRAM + + PHYSADDR is for physical address, KSEG1ADDR is for uncached. + + Signed-off-by: Vlad Lungu <vlad@comsys.ro> + Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> + +commit 00101dd7a32d12f698150123e47e4b3420279f86 +Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> +Date: Sun Oct 21 21:30:42 2007 +0900 + + [MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanup + + Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> + +commit eb700636db017d310edaeb559b13d82588560674 +Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> +Date: Sun Oct 21 10:55:37 2007 +0900 + + [MIPS] u-boot.lds: Define _gp in a standard manner + + Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> + +commit 22069215eb7adf5a3888bf7c7784ea9d70a72cd0 +Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> +Date: Sun Oct 21 10:55:36 2007 +0900 + + [MIPS] Fix $gp usage + + Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use. + As a general principle, we should use _gp for $gp. + + Thanks to linker script's help we fortunately have _gp which equals to + _GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not + be able to access to GOT entires, global variables and procedure entry + points. The right thing to do is to use _gp. + + This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_' + which holds the offset from _gp. When updating GOT entries, we use this + offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_. + + This patch is originally submitted by Vlad Lungu <vlad@comsys.ro>, then + I made some change to leave over num_got_entries. + + Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> + Cc: Vlad Lungu <vlad@comsys.ro> + +commit cbf2323b5b8285ea01acba7bbb905a3162d9b021 +Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> +Date: Sun Oct 21 10:55:36 2007 +0900 + + [MIPS] u-boot.lds: Fix __got_start and __got_end + + Ensure that __got_start points to top of the `.got', and __got_end points + to bottom as well, so that we never fail to count num_got_entries. + + Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> + +commit e5f325fec5b48ae705c89522923ba5a2e37cd5c7 +Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> +Date: Sun Oct 21 10:55:36 2007 +0900 + + [MIPS] u-boot.lds: Remove duplicated .sdata section + + Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> + commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1 Author: Wolfgang Denk <wd@denx.de> Date: Sun Oct 21 01:01:17 2007 +0200 @@ -73,6 +504,84 @@ Date: Thu Oct 4 20:47:10 2007 +0300 Signed-off-by: Vlad Lungu <vlad@comsys.ro> +commit df90968b48fb34fa9072fab150db2ac89678f537 +Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com> +Date: Mon Sep 24 13:32:13 2007 -0400 + + Setting MSR[DE] in do_reset + + Hello, + This patch ensures the soft reset of the board for the 85xx boards + by setting the MSR[DE] in the do_reset function. + + Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com> + +commit 1e701e701304b3c3a3768ca83dd2ab7b9e88c77d +Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com> +Date: Mon Sep 24 13:36:01 2007 -0400 + + MSR overwrite fix + + Hello, + This patch fixes the MSR overwrite in the start.S when moving out of + the last 4K page. + + Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com> + +commit 5c7ea64bb74a850a2b2303f853a8270695ad8602 +Author: Dan Wilson <dwilson@fulcrummicro.com> +Date: Fri Oct 19 11:33:48 2007 -0500 + + tsec driver should clear RHALT on startup + + This was causing problems for some people. + + Signed-off-by: Alain Gravel <agravel@fulcrummicro.com> + Signed-off-by: Dan Wilson <dwilson@fulcrummicro.com> + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit 7600d47b8f6a10019e537dc9a62aa1498df58d25 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Oct 11 00:29:18 2007 -0500 + + Improve handling of PCI interrupt device tree fixup on MPC85xx CDS + + On the MPC85xx CDS we have two issues: + + 1. The device tree fixup code did not check to see if the property we are + trying to update is actually found. Its possible that it would update + random memory starting at 0. + + 2. Newer Linux kernel's have moved the location of the PCI nodes to be + sibilings of the soc node and not children. The explicit PATH to the PCI + node would not be found for these device trees. Add the ability to handle + both paths. In the future we shouldn't handle such fixups by explicit path. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit a3063eec775719b7e91023bbec3f64b3118791df +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Oct 11 00:18:48 2007 -0500 + + Set OF_STDOUT_PATH to match the default console on MPC8568 MDS + + On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured + console. Make it so we match that config what we tell Linux as the early + STDOUT console. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit e1ce3cb617bb06f91f82f98915391175addf3e82 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Tue Oct 2 11:12:27 2007 -0500 + + Remove magic numbers from cache related operations for mpc85xx + + The mpc85xx start code uses some magic numbers that we actually + have #defines for in <config.h> so use those instead. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + commit 5441f61a3d8b7034f19fc1361183e936198e6dbb Author: Detlev Zundel <dzu@denx.de> Date: Fri Oct 19 16:47:26 2007 +0200 @@ -409,6 +918,16 @@ Date: Tue Sep 11 14:12:55 2007 +0200 Signed-off-by: Stefan Roese <sr@denx.de> +commit 1487adbdcf9594bb2eb686325a6f9540dad1b70a +Author: Ed Swarthout <Ed.Swarthout@freescale.com> +Date: Wed Sep 26 16:35:54 2007 -0500 + + 85xx io out functions need sync after write. + + This fixes the mc146818 rtc_read/write functions for 85xx. + + Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> + commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae Author: Grant Likely <grant.likely@secretlab.ca> Date: Tue Sep 25 15:48:05 2007 -0600 @@ -1733,9 +1733,13 @@ M54455EVB_i66_config : unconfig >include/config.h ; \ if [ "$${FLASH}" == "INTEL" ] ; then \ echo "#undef CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \ + echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ + cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \ echo "... with INTEL boot..." ; \ else \ echo "#define CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \ + echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ + cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \ echo "... with ATMEL boot..." ; \ fi; \ echo "#define CFG_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \ @@ -2123,7 +2123,7 @@ to save the current settings. to be a good choice since it makes it far enough from the start of the data area as well as from the stack pointer. -Please note that the environment is read-only as long as the monitor +Please note that the environment is read-only until the monitor has been relocated to RAM and a RAM copy of the environment has been created; also, when using EEPROM you will have to use getenv_r() until then to read environment variables. diff --git a/blackfin_config.mk b/blackfin_config.mk index df324b7efa..f71a31370e 100644 --- a/blackfin_config.mk +++ b/blackfin_config.mk @@ -21,4 +21,4 @@ # MA 02111-1307 USA # -PLATFORM_CPPFLAGS += -DCONFIG_BLACKFIN +PLATFORM_CPPFLAGS += -DCONFIG_BLACKFIN -D__BLACKFIN__ diff --git a/board/cds/common/ft_board.c b/board/cds/common/ft_board.c index 9d97905ca9..3eda1009ef 100644 --- a/board/cds/common/ft_board.c +++ b/board/cds/common/ft_board.c @@ -37,17 +37,24 @@ static void cds_pci_fixup(void *blob) map = ft_get_prop(blob, "/" OF_SOC "/pci@8000/interrupt-map", &len); - len /= sizeof(u32); + if (!map) + map = ft_get_prop(blob, "/" OF_PCI "/interrupt-map", &len); - slot = get_pci_slot(); + if (map) { + len /= sizeof(u32); - for (i=0;i<len;i+=7) { - /* We rotate the interrupt pins so that the mapping - * changes depending on the slot the carrier card is in. - */ - map[3] = ((map[3] + slot - 2) % 4) + 1; + slot = get_pci_slot(); - map+=7; + for (i=0;i<len;i+=7) { + /* We rotate the interrupt pins so that the mapping + * changes depending on the slot the carrier card is in. + */ + map[3] = ((map[3] + slot - 2) % 4) + 1; + + map+=7; + } + } else { + printf("*** Warning - No PCI node found\n"); } } #endif diff --git a/board/dbau1x00/u-boot.lds b/board/dbau1x00/u-boot.lds index 10c9917986..9639b81acc 100644 --- a/board/dbau1x00/u-boot.lds +++ b/board/dbau1x00/u-boot.lds @@ -43,14 +43,14 @@ SECTIONS . = ALIGN(4); .data : { *(.data) } - . = ALIGN(4); - .sdata : { *(.sdata) } - - _gp = ALIGN(16); + . = .; + _gp = ALIGN(16) + 0x7ff0; - __got_start = .; - .got : { *(.got) } - __got_end = .; + .got : { + __got_start = .; + *(.got) + __got_end = .; + } .sdata : { *(.sdata) } diff --git a/board/freescale/m54455evb/config.mk b/board/freescale/m54455evb/config.mk index ce014edca8..b42fcc94ce 100644 --- a/board/freescale/m54455evb/config.mk +++ b/board/freescale/m54455evb/config.mk @@ -22,4 +22,6 @@ # MA 02111-1307 USA # -TEXT_BASE = 0 +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp + +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) diff --git a/board/gth2/u-boot.lds b/board/gth2/u-boot.lds index 8ba0b6d4c1..90432cb888 100644 --- a/board/gth2/u-boot.lds +++ b/board/gth2/u-boot.lds @@ -43,14 +43,14 @@ SECTIONS . = ALIGN(4); .data : { *(.data) } - . = ALIGN(4); - .sdata : { *(.sdata) } + . = .; + _gp = ALIGN(16) + 0x7ff0; - _gp = ALIGN(16); - - __got_start = .; - .got : { *(.got) } - __got_end = .; + .got : { + __got_start = .; + *(.got) + __got_end = .; + } .sdata : { *(.sdata) } diff --git a/board/ids8247/ids8247.c b/board/ids8247/ids8247.c index 19823a474e..b05424d32b 100644 --- a/board/ids8247/ids8247.c +++ b/board/ids8247/ids8247.c @@ -25,6 +25,12 @@ #include <ioports.h> #include <mpc8260.h> +#if defined(CONFIG_OF_LIBFDT) +#include <libfdt.h> +#include <libfdt_env.h> +#include <fdt_support.h> +#endif + DECLARE_GLOBAL_DATA_PTR; /* @@ -38,12 +44,12 @@ const iop_conf_t iop_conf_tab[4][32] = { /* Port A configuration */ { /* conf ppar psor pdir podr pdat */ - /* PA31 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 COL */ - /* PA30 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 CRS */ - /* PA29 */ { 0, 1, 1, 1, 0, 0 }, /* FCC1 TXER */ - /* PA28 */ { 0, 1, 1, 1, 0, 0 }, /* FCC1 TXEN */ - /* PA27 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 RXDV */ - /* PA26 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 RXER */ + /* PA31 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 COL */ + /* PA30 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 CRS */ + /* PA29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 TXER */ + /* PA28 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 TXEN */ + /* PA27 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RXDV */ + /* PA26 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RXER */ /* PA25 */ { 0, 0, 0, 0, 1, 0 }, /* 8247_P0 */ #if defined(CONFIG_SOFT_I2C) /* PA24 */ { 1, 0, 0, 0, 1, 1 }, /* I2C_SDA2 */ @@ -53,14 +59,14 @@ const iop_conf_t iop_conf_tab[4][32] = { /* PA23 */ { 0, 0, 0, 1, 0, 0 }, /* PA23 */ #endif /* PA22 */ { 0, 0, 0, 0, 1, 0 }, /* SMC2_DCD */ - /* PA21 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TXD3 */ - /* PA20 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TXD2 */ - /* PA19 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TXD1 */ - /* PA18 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TXD0 */ - /* PA17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RXD0 */ - /* PA16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RXD1 */ - /* PA15 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RXD2 */ - /* PA14 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RXD3 */ + /* PA21 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD3 */ + /* PA20 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD2 */ + /* PA19 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD1 */ + /* PA18 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD0 */ + /* PA17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD0 */ + /* PA16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD1 */ + /* PA15 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD2 */ + /* PA14 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD3 */ /* PA13 */ { 0, 0, 0, 1, 1, 0 }, /* SMC2_RTS */ /* PA12 */ { 0, 0, 0, 0, 1, 0 }, /* SMC2_CTS */ /* PA11 */ { 0, 0, 0, 1, 1, 0 }, /* SMC2_DTR */ @@ -79,20 +85,20 @@ const iop_conf_t iop_conf_tab[4][32] = { /* Port B configuration */ { /* conf ppar psor pdir podr pdat */ - /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */ - /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */ - /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */ - /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */ - /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */ - /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */ - /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */ - /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */ - /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */ - /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */ - /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */ - /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */ - /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */ - /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */ + /* PB31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */ + /* PB30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */ + /* PB29 */ { 0, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */ + /* PB28 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */ + /* PB27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */ + /* PB26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */ + /* PB25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */ + /* PB24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */ + /* PB23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */ + /* PB22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */ + /* PB21 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */ + /* PB20 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */ + /* PB19 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */ + /* PB18 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */ /* PB17 */ { 0, 0, 0, 0, 0, 0 }, /* PB17 */ /* PB16 */ { 0, 0, 0, 0, 0, 0 }, /* PB16 */ /* PB15 */ { 0, 0, 0, 0, 0, 0 }, /* PB15 */ @@ -123,8 +129,8 @@ const iop_conf_t iop_conf_tab[4][32] = { /* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */ /* PC25 */ { 0, 1, 1, 0, 0, 0 }, /* SYNC_IN */ /* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */ - /* PC23 */ { 0, 1, 0, 1, 0, 0 }, /* ATMTFCLK */ - /* PC22 */ { 0, 1, 0, 0, 0, 0 }, /* ATMRFCLK */ + /* PC23 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII TX_CLK */ + /* PC22 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RX_CLK */ /* PC21 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */ /* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */ /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK */ @@ -180,7 +186,7 @@ const iop_conf_t iop_conf_tab[4][32] = { /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */ /* PD9 */ { 0, 0, 0, 0, 0, 0 }, /* PD9 */ /* PD8 */ { 0, 0, 0, 0, 0, 0 }, /* PD8 */ - /* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* MII_MDIO */ + /* PD7 */ { 1, 0, 0, 1, 0, 1 }, /* MII_MDIO */ /* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */ /* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */ /* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */ @@ -224,7 +230,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, * mapped by the controller. That means, that the initial mapping has * to be (at least) twice as large as the maximum expected size. */ - maxsize = (1 + (~orx | 0x7fff)) / 2; + maxsize = (1 + (~orx | 0x7fff))/* / 2*/; sdmr_ptr = &memctl->memc_psdmr; orx_ptr = &memctl->memc_or2; @@ -315,4 +321,38 @@ nand_init (void) printf ("%4lu MB\n", totlen >>20); } -#endif +#endif /* CFG_CMD_NAND */ + +#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) +/* + * update "memory" property in the blob + */ +void ft_blob_update(void *blob, bd_t *bd) +{ + int ret, nodeoffset = 0; + ulong memory_data[2] = {0}; + + memory_data[0] = cpu_to_be32(bd->bi_memstart); + memory_data[1] = cpu_to_be32(bd->bi_memsize); + + nodeoffset = fdt_find_node_by_path (blob, "/memory"); + if (nodeoffset >= 0) { + ret = fdt_setprop(blob, nodeoffset, "reg", memory_data, + sizeof(memory_data)); + if (ret < 0) + printf("ft_blob_update): cannot set /memory/reg " + "property err:%s\n", fdt_strerror(ret)); + } + else { + /* memory node is required in dts */ + printf("ft_blob_update(): cannot find /memory node " + "err:%s\n", fdt_strerror(nodeoffset)); + } +} + +void ft_board_setup(void *blob, bd_t *bd) +{ + ft_cpu_setup( blob, bd); + ft_blob_update(blob, bd); +} +#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */ diff --git a/board/incaip/u-boot.lds b/board/incaip/u-boot.lds index 10c9917986..9639b81acc 100644 --- a/board/incaip/u-boot.lds +++ b/board/incaip/u-boot.lds @@ -43,14 +43,14 @@ SECTIONS . = ALIGN(4); .data : { *(.data) } - . = ALIGN(4); - .sdata : { *(.sdata) } - - _gp = ALIGN(16); + . = .; + _gp = ALIGN(16) + 0x7ff0; - __got_start = .; - .got : { *(.got) } - __got_end = .; + .got : { + __got_start = .; + *(.got) + __got_end = .; + } .sdata : { *(.sdata) } diff --git a/board/m5282evb/m5282evb.c b/board/m5282evb/m5282evb.c index 243d6a4d83..7d6d1d6231 100644 --- a/board/m5282evb/m5282evb.c +++ b/board/m5282evb/m5282evb.c @@ -89,4 +89,5 @@ long int initdram (int board_type) /* Write to the SDRAM Mode Register */ *(u32 *)(CFG_SDRAM_BASE + 0x400) = 0xA5A59696; } + return dramsize; } diff --git a/board/pb1x00/u-boot.lds b/board/pb1x00/u-boot.lds index a2d19a84c9..363d974c48 100644 --- a/board/pb1x00/u-boot.lds +++ b/board/pb1x00/u-boot.lds @@ -43,14 +43,14 @@ SECTIONS . = ALIGN(4); .data : { *(.data) } - . = ALIGN(4); - .sdata : { *(.sdata) } + . = .; + _gp = ALIGN(16) + 0x7ff0; - _gp = ALIGN(16); - - __got_start = .; - .got : { *(.got) } - __got_end = .; + .got : { + __got_start = .; + *(.got) + __got_end = .; + } .sdata : { *(.sdata) } diff --git a/board/purple/u-boot.lds b/board/purple/u-boot.lds index 1bdac1f4a6..e7ec012c3b 100644 --- a/board/purple/u-boot.lds +++ b/board/purple/u-boot.lds @@ -53,14 +53,14 @@ SECTIONS . = ALIGN(4); .data : { *(.data) } - . = ALIGN(4); - .sdata : { *(.sdata) } - - _gp = ALIGN(16); + . = .; + _gp = ALIGN(16) + 0x7ff0; - __got_start = .; - .got : { *(.got) } - __got_end = .; + .got : { + __got_start = .; + *(.got) + __got_end = .; + } .sdata : { *(.sdata) } diff --git a/board/tb0229/u-boot.lds b/board/tb0229/u-boot.lds index 30a2bc57ea..b2fa9f22dc 100644 --- a/board/tb0229/u-boot.lds +++ b/board/tb0229/u-boot.lds @@ -43,14 +43,14 @@ SECTIONS . = ALIGN(4); .data : { *(.data) } - . = ALIGN(4); - .sdata : { *(.sdata) } - - _gp = ALIGN(16); + . = .; + _gp = ALIGN(16) + 0x7ff0; - __got_start = .; - .got : { *(.got) } - __got_end = .; + .got : { + __got_start = .; + *(.got) + __got_end = .; + } .sdata : { *(.sdata) } diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c index d10cb5937d..da4e2281a7 100644 --- a/board/tqm5200/tqm5200.c +++ b/board/tqm5200/tqm5200.c @@ -441,15 +441,21 @@ ulong post_word_load (void) } #endif /* CONFIG_POST || CONFIG_LOGBUFFER*/ -#ifdef CONFIG_PS2MULT #ifdef CONFIG_BOARD_EARLY_INIT_R int board_early_init_r (void) { +#ifdef CONFIG_PS2MULT ps2mult_early_init(); +#endif /* CONFIG_PS2MULT */ + +#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT) + /* Low level USB init, required for proper kernel operation */ + usb_cpu_init(); +#endif + return (0); } #endif -#endif /* CONFIG_PS2MULT */ #ifdef CONFIG_FO300 int silent_boot (void) diff --git a/common/usb_kbd.c b/common/usb_kbd.c index aec558ad20..7bdfcc0b90 100644 --- a/common/usb_kbd.c +++ b/common/usb_kbd.c @@ -257,7 +257,7 @@ static int usb_kbd_translate(unsigned char scancode,unsigned char modifier,int p repeat_delay=REPEAT_DELAY; } keycode=0; - if((scancode>3) && (scancode<0x1d)) { /* alpha numeric values */ + if((scancode>3) && (scancode<=0x1d)) { /* alpha numeric values */ keycode=scancode-4 + 0x61; if(caps_lock) keycode&=~CAPITAL_MASK; /* switch to capital Letters */ @@ -69,10 +69,6 @@ PLATFORM_CPPFLAGS+= -D__ARM__ endif endif -ifeq ($(ARCH),blackfin) -PLATFORM_CPPFLAGS+= -D__BLACKFIN__ -endif - ifdef ARCH sinclude $(TOPDIR)/$(ARCH)_config.mk # include architecture dependend rules endif diff --git a/cpu/mcf52x2/start.S b/cpu/mcf52x2/start.S index 686e2a5333..260a09abf7 100644 --- a/cpu/mcf52x2/start.S +++ b/cpu/mcf52x2/start.S @@ -58,7 +58,7 @@ _vectors: .long 0x00000000 /* Flash offset is 0 until we setup CS0 */ #if defined(CONFIG_R5200) .long 0x400 -#elif defined(CONFIG_M5282) +#elif defined(CONFIG_M5282) && (TEXT_BASE == CFG_INT_FLASH_BASE) .long _start - TEXT_BASE #else .long _START @@ -177,7 +177,11 @@ _after_flashbar_copy: * therefore no VBR to set */ #if !defined(CONFIG_MONITOR_IS_IN_RAM) +#if defined(CONFIG_M5282) && (TEXT_BASE == CFG_INT_FLASH_BASE) + move.l #CFG_INT_FLASH_BASE, %d0 +#else move.l #CFG_FLASH_BASE, %d0 +#endif movec %d0, %VBR #endif diff --git a/cpu/mcf532x/start.S b/cpu/mcf532x/start.S index 5cc1c87cdd..61be2eac69 100644 --- a/cpu/mcf532x/start.S +++ b/cpu/mcf532x/start.S @@ -131,7 +131,7 @@ _start: movec %d0, %VBR move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_CTRL), %d0 - movec %d0, %RAMBAR0 + movec %d0, %RAMBAR1 /* invalidate and disable cache */ move.l #0x01000000, %d0 /* Invalidate cache cmd */ @@ -268,7 +268,7 @@ _int_handler: icache_enable: move.l #0x01000000, %d0 /* Invalidate cache cmd */ movec %d0, %CACR /* Invalidate cache */ - move.l #(CFG_SDRAM_BASE + 0xc000 + ((CFG_SDRAM_SIZE & 0x1fe0) << 11)), %d0 + move.l #(CFG_SDRAM_BASE + 0x1c000), %d0 movec %d0, %ACR0 /* Enable cache */ move.l #0x80000200, %d0 /* Setup cache mask */ diff --git a/cpu/mips/config.mk b/cpu/mips/config.mk index b29986e26b..487c4eb5d6 100644 --- a/cpu/mips/config.mk +++ b/cpu/mips/config.mk @@ -35,6 +35,6 @@ else ENDIANNESS = -EB endif -MIPSFLAGS += $(ENDIANNESS) -mabicalls +MIPSFLAGS += $(ENDIANNESS) PLATFORM_CPPFLAGS += $(MIPSFLAGS) diff --git a/cpu/mips/start.S b/cpu/mips/start.S index e91e2137d7..074d01d2dd 100644 --- a/cpu/mips/start.S +++ b/cpu/mips/start.S @@ -234,11 +234,11 @@ reset: li t0, CONF_CM_UNCACHED mtc0 t0, CP0_CONFIG - /* Initialize GOT pointer. + /* Initialize $gp. */ bal 1f nop - .word _GLOBAL_OFFSET_TABLE_ + .word _gp 1: move gp, ra lw t1, 0(ra) @@ -306,9 +306,9 @@ relocate_code: move t1, a2 /* - * Fix GOT pointer: + * Fix $gp: * - * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address + * New $gp = (Old $gp - CFG_MONITOR_BASE) + Destination Address */ move t6, gp sub gp, CFG_MONITOR_BASE @@ -341,15 +341,22 @@ relocate_code: j t0 nop + .gpword _GLOBAL_OFFSET_TABLE_ /* _GLOBAL_OFFSET_TABLE_ - _gp */ .word uboot_end_data .word uboot_end .word num_got_entries in_ram: - /* Now we want to update GOT. + /* + * Now we want to update GOT. + * + * GOT[0] is reserved. GOT[1] is also reserved for the dynamic object + * generated by GNU ld. Skip these reserved entries from relocation. */ lw t3, -4(t0) /* t3 <-- num_got_entries */ - addi t4, gp, 8 /* Skipping first two entries. */ + lw t4, -16(t0) /* t4 <-- (_GLOBAL_OFFSET_TABLE_ - _gp) */ + add t4, t4, gp /* t4 now holds _GLOBAL_OFFSET_TABLE_ */ + addi t4, t4, 8 /* Skipping first two entries. */ li t2, 2 1: lw t1, 0(t4) diff --git a/cpu/mpc824x/interrupts.c b/cpu/mpc824x/interrupts.c index acb8947e0d..4359ecc05e 100644 --- a/cpu/mpc824x/interrupts.c +++ b/cpu/mpc824x/interrupts.c @@ -86,7 +86,7 @@ void irq_free_handler (int vec) vga? */ -void timer_interrupt_cpu (struct pt_regs *regs, ulong timestamp) +void timer_interrupt_cpu (struct pt_regs *regs) { /* nothing to do here */ return; diff --git a/cpu/mpc8260/cpu.c b/cpu/mpc8260/cpu.c index 94651dc4a6..c2b753d6bd 100644 --- a/cpu/mpc8260/cpu.c +++ b/cpu/mpc8260/cpu.c @@ -47,6 +47,11 @@ #include <asm/processor.h> #include <asm/cpm_8260.h> +#if defined(CONFIG_OF_LIBFDT) +#include <libfdt.h> +#include <libfdt_env.h> +#endif + DECLARE_GLOBAL_DATA_PTR; #if defined(CONFIG_GET_CPU_STR_F) @@ -294,3 +299,36 @@ void watchdog_reset (void) #endif /* CONFIG_WATCHDOG */ /* ------------------------------------------------------------------------- */ +#if defined(CONFIG_OF_LIBFDT) +static void do_fixup(void *fdt, const char *node, const char *prop, + const void *val, int len, int create) +{ +#if defined(DEBUG) + int i; + debug("Updating property '%s/%s' = ", node, prop); + for (i = 0; i < len; i++) + debug(" %.2x", *(u8*)(val+i)); + debug("\n"); +#endif + int rc = fdt_find_and_setprop(fdt, node, prop, val, len, create); + if (rc) + printf("Unable to update property %s:%s, err=%s\n", + node, prop, fdt_strerror(rc)); +} + +static void do_fixup_u32(void *fdt, const char *node, const char *prop, + u32 val, int create) +{ + val = cpu_to_fdt32(val); + do_fixup(fdt, node, prop, &val, sizeof(val), create); +} + +void ft_cpu_setup (void *blob, bd_t *bd) +{ + char * cpu_path = "/cpus/" OF_CPU; + + do_fixup_u32(blob, cpu_path, "bus-frequency", bd->bi_busfreq, 1); + do_fixup_u32(blob, cpu_path, "timebase-frequency", OF_TBCLK, 1); + do_fixup_u32(blob, cpu_path, "clock-frequency", bd->bi_intfreq, 1); +} +#endif /* CONFIG_OF_LIBFDT */ diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c index 08e04685f5..bbc54448da 100644 --- a/cpu/mpc85xx/cpu.c +++ b/cpu/mpc85xx/cpu.c @@ -163,7 +163,12 @@ int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) * Initiate hard reset in debug control register DBCR0 * Make sure MSR[DE] = 1 */ - unsigned long val; + unsigned long val, msr; + + msr = mfmsr (); + msr |= MSR_DE; + mtmsr (msr); + val = mfspr(DBCR0); val |= 0x70000000; mtspr(DBCR0,val); diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S index 2c98c2ad8a..b769ef8a76 100644 --- a/cpu/mpc85xx/start.S +++ b/cpu/mpc85xx/start.S @@ -218,6 +218,8 @@ _start_e500: bdnz 0b /* Clear and set up some registers. */ + li r0,0 + mtmsr r0 li r0,0x0000 lis r1,0xffff mtspr DEC,r0 /* prevent dec exceptions */ @@ -266,18 +268,17 @@ _start_e500: */ lis r3,CFG_INIT_RAM_ADDR@h ori r3,r3,CFG_INIT_RAM_ADDR@l - li r2,512 /* 512*32=16K */ + li r2,(CFG_DCACHE_SIZE / (2 * CFG_CACHELINE_SIZE)) mtctr r2 li r0,0 1: dcbz r0,r3 dcbtls 0,r0,r3 - addi r3,r3,32 + addi r3,r3,CFG_CACHELINE_SIZE bdnz 1b /* Jump out the last 4K page and continue to 'normal' start */ #ifdef CFG_RAMBOOT - bl 3f b _start_cont #else /* Calculate absolute address in FLASH and jump there */ @@ -286,15 +287,9 @@ _start_e500: ori r3,r3,CFG_MONITOR_BASE@l addi r3,r3,_start_cont - _start + _START_OFFSET mtlr r3 + blr #endif -3: li r0,0 - mtspr SRR1,r0 /* Keep things disabled for now */ - mflr r1 - mtspr SRR0,r1 - rfi - isync - .text .globl _start _start: @@ -701,6 +696,7 @@ in8: .globl out8 out8: stb r4,0x0000(r3) + sync blr /*------------------------------------------------------------------------------- */ @@ -710,6 +706,7 @@ out8: .globl out16 out16: sth r4,0x0000(r3) + sync blr /*------------------------------------------------------------------------------- */ @@ -719,6 +716,7 @@ out16: .globl out16r out16r: sthbrx r4,r0,r3 + sync blr /*------------------------------------------------------------------------------- */ @@ -728,6 +726,7 @@ out16r: .globl out32 out32: stw r4,0x0000(r3) + sync blr /*------------------------------------------------------------------------------- */ @@ -737,6 +736,7 @@ out32: .globl out32r out32r: stwbrx r4,r0,r3 + sync blr /*------------------------------------------------------------------------------- */ @@ -1061,11 +1061,11 @@ unlock_ram_in_cache: /* invalidate the INIT_RAM section */ lis r3,(CFG_INIT_RAM_ADDR & ~31)@h ori r3,r3,(CFG_INIT_RAM_ADDR & ~31)@l - li r4,512 + li r4,(CFG_DCACHE_SIZE / (2 * CFG_CACHELINE_SIZE)) mtctr r4 1: icbi r0,r3 dcbi r0,r3 - addi r3,r3,32 + addi r3,r3,CFG_CACHELINE_SIZE bdnz 1b sync /* Wait for all icbi to complete on bus */ isync diff --git a/drivers/Makefile b/drivers/Makefile index 00978d8285..d19588f3af 100755 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -45,7 +45,7 @@ COBJS = 3c589.o 5701rls.o ali512x.o at45.o ata_piix.o \ s3c4510b_eth.o s3c4510b_uart.o \ sed13806.o sed156x.o \ serial.o serial_max3100.o \ - serial_pl010.o serial_pl011.o serial_xuartlite.o \ + serial_xuartlite.o \ sil680.o sl811_usb.o sm501.o smc91111.o smiLynxEM.o \ status_led.o sym53c8xx.o systemace.o ahci.o \ ti_pci1410a.o tigon3.o tqm8xx_pcmcia.o tsec.o \ diff --git a/drivers/ne2000.c b/drivers/ne2000.c index 695a1dc6c9..c978d62ef3 100644 --- a/drivers/ne2000.c +++ b/drivers/ne2000.c @@ -723,7 +723,8 @@ static hw_info_t hw_info[] = { { /* SuperSocket RE450T */ 0x0110, 0x00, 0xe0, 0x98, 0 }, { /* Volktek NPL-402CT */ 0x0060, 0x00, 0x40, 0x05, 0 }, { /* NEC PC-9801N-J12 */ 0x0ff0, 0x00, 0x00, 0x4c, 0 }, - { /* PCMCIA Technology OEM */ 0x01c8, 0x00, 0xa0, 0x0c, 0 } + { /* PCMCIA Technology OEM */ 0x01c8, 0x00, 0xa0, 0x0c, 0 }, + { /* Qemu */ 0x0, 0x52, 0x54, 0x00, 0 } }; #define NR_INFO (sizeof(hw_info)/sizeof(hw_info_t)) @@ -824,30 +825,22 @@ static hw_info_t * get_prom(void ) { /* U-boot specific routines */ -#define NB 5 static unsigned char *pbuf = NULL; -static int plen[NB]; -static int nrx = 0; static int pkey = -1; static int initialized=0; void uboot_push_packet_len(int len) { - PRINTK("pushed len = %d, nrx = %d\n", len, nrx); + PRINTK("pushed len = %d\n", len); if (len>=2000) { printf("NE2000: packet too big\n"); return; } - if (nrx >= NB) { - printf("losing packets in rx\n"); - return; - } - plen[nrx] = len; - dp83902a_recv(&pbuf[nrx*2000], len); + dp83902a_recv(&pbuf[0], len); /*Just pass it to the upper layer*/ - NetReceive(&pbuf[nrx*2000], plen[nrx]); + NetReceive(&pbuf[0], len); } void uboot_push_tx_done(int key, int val) { @@ -862,9 +855,9 @@ int eth_init(bd_t *bd) { PRINTK("### eth_init\n"); if (!pbuf) { - pbuf = malloc(NB*2000); + pbuf = malloc(2000); if (!pbuf) { - printf("Cannot allocate rx buffers\n"); + printf("Cannot allocate rx buffer\n"); return -1; } } diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 93c68dd2e0..40f3d672ec 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB := $(obj)libserial.a -COBJS := mcfuart.o +COBJS := mcfuart.o serial_pl010.o serial_pl011.o SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/drivers/serial_pl010.c b/drivers/serial/serial_pl010.c index 417b6aeda6..417b6aeda6 100644 --- a/drivers/serial_pl010.c +++ b/drivers/serial/serial_pl010.c diff --git a/drivers/serial_pl011.c b/drivers/serial/serial_pl011.c index 4d35fe5e9e..4d35fe5e9e 100644 --- a/drivers/serial_pl011.c +++ b/drivers/serial/serial_pl011.c diff --git a/drivers/serial_pl011.h b/drivers/serial/serial_pl011.h index 5f20fdd108..5f20fdd108 100644 --- a/drivers/serial_pl011.h +++ b/drivers/serial/serial_pl011.h diff --git a/drivers/tsec.c b/drivers/tsec.c index 4ff3339c7d..7ba8f0cace 100644 --- a/drivers/tsec.c +++ b/drivers/tsec.c @@ -803,6 +803,7 @@ static void startup_tsec(struct eth_device *dev) /* Tell the DMA it is clear to go */ regs->dmactrl |= DMACTRL_INIT_SETTINGS; regs->tstat = TSTAT_CLEAR_THALT; + regs->rstat = RSTAT_CLEAR_RHALT; regs->dmactrl &= ~(DMACTRL_GRS | DMACTRL_GTS); } diff --git a/examples/mips.lds b/examples/mips.lds index 9d9849bf5c..a7707287a2 100644 --- a/examples/mips.lds +++ b/examples/mips.lds @@ -39,14 +39,14 @@ SECTIONS . = ALIGN(4); .data : { *(.data) } - . = ALIGN(4); - .sdata : { *(.sdata) } + . = .; + _gp = ALIGN(16) + 0x7ff0; - _gp = ALIGN(16); - - __got_start = .; - .got : { *(.got) } - __got_end = .; + .got : { + __got_start = .; + *(.got) + __got_end = .; + } .sdata : { *(.sdata) } diff --git a/include/asm-mips/addrspace.h b/include/asm-mips/addrspace.h index b8214b1c85..0e6abd7d0f 100644 --- a/include/asm-mips/addrspace.h +++ b/include/asm-mips/addrspace.h @@ -49,7 +49,7 @@ cannot access physical memory directly from core */ #define UNCACHED_SDRAM(a) (((unsigned long)(a)) | 0x20000000) #else /* !CONFIG_AU1X00 */ -#define UNCACHED_SDRAM(a) PHYSADDR(a) +#define UNCACHED_SDRAM(a) KSEG1ADDR(a) #endif /* CONFIG_AU1X00 */ #endif /* __ASSEMBLY__ */ /* diff --git a/include/configs/ADNPESC1.h b/include/configs/ADNPESC1.h index 77938b140d..c45c39554e 100644 --- a/include/configs/ADNPESC1.h +++ b/include/configs/ADNPESC1.h @@ -574,38 +574,30 @@ /* * Command line configuration. */ -#include <config_cmd_all.h> - -#undef CONFIG_CMD_ASKENV -#undef CONFIG_CMD_BEDBUG -#undef CONFIG_CMD_BMP -#undef CONFIG_CMD_CACHE -#undef CONFIG_CMD_DOC -#undef CONFIG_CMD_DTT -#undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_ELF -#undef CONFIG_CMD_FAT -#undef CONFIG_CMD_FDC -#undef CONFIG_CMD_FDOS -#undef CONFIG_CMD_HWFLOW -#undef CONFIG_CMD_IDE -#undef CONFIG_CMD_I2C -#undef CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_KGDB -#undef CONFIG_CMD_NAND +#include <config_cmd_default.h> + +#define CONFIG_CMD_BSP +#define CONFIG_CMD_CDP +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_DISPLAY +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_PING +#define CONFIG_CMD_PORTIO +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_REISER +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + #undef CONFIG_CMD_NFS -#undef CONFIG_CMD_MMC -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_PCI -#undef CONFIG_CMD_PCMCIA -#undef CONFIG_CMD_SCSI -#undef CONFIG_CMD_VFD -#undef CONFIG_CMD_USB #undef CONFIG_CMD_XIMG -#if (CFG_NIOS_CPU_SPI_NUMS != 1) -#undef CONFIG_CMD_SPI -#undef CONFIG_CMD_DATE +#if (CFG_NIOS_CPU_SPI_NUMS == 1) +#define CONFIG_CMD_DATE +#define CONFIG_CMD_SPI #endif /*------------------------------------------------------------------------ diff --git a/include/configs/DK1C20.h b/include/configs/DK1C20.h index 0ddf0e3aeb..eb78080208 100644 --- a/include/configs/DK1C20.h +++ b/include/configs/DK1C20.h @@ -459,38 +459,27 @@ /* * Command line configuration. */ -#include <config_cmd_all.h> - -#undef CONFIG_CMD_ASKENV -#undef CONFIG_CMD_BEDBUG -#undef CONFIG_CMD_BMP -#undef CONFIG_CMD_BSP -#undef CONFIG_CMD_CACHE -#undef CONFIG_CMD_DATE -#undef CONFIG_CMD_DOC -#undef CONFIG_CMD_DTT -#undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_ELF -#undef CONFIG_CMD_FDC -#undef CONFIG_CMD_FDOS -#undef CONFIG_CMD_HWFLOW -#undef CONFIG_CMD_I2C -#undef CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_KGDB -#undef CONFIG_CMD_NAND +#include <config_cmd_default.h> + +#define CONFIG_CMD_CDP +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_DISPLAY +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IDE +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_PING +#define CONFIG_CMD_PORTIO +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + #undef CONFIG_CMD_NFS -#undef CONFIG_CMD_MMC -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_PCI -#undef CONFIG_CMD_PCMCIA -#undef CONFIG_CMD_REISER -#undef CONFIG_CMD_SCSI -#undef CONFIG_CMD_SPI -#undef CONFIG_CMD_VFD -#undef CONFIG_CMD_USB #undef CONFIG_CMD_XIMG - /*------------------------------------------------------------------------ * COMPACT FLASH *----------------------------------------------------------------------*/ diff --git a/include/configs/DK1S10.h b/include/configs/DK1S10.h index 0032fd3db7..bd360717a7 100644 --- a/include/configs/DK1S10.h +++ b/include/configs/DK1S10.h @@ -466,38 +466,25 @@ /* * Command line configuration. */ -#include <config_cmd_all.h> - -#undef CONFIG_CMD_ASKENV -#undef COND_CMD_BEDBUG -#undef COND_CMD_BMP -#undef COND_CMD_BSP -#undef COND_CMD_CACHE -#undef COND_CMD_DATE -#undef COND_CMD_DOC -#undef COND_CMD_DTT -#undef COND_CMD_EEPROM -#undef COND_CMD_ELF -#undef COND_CMD_FAT -#undef COND_CMD_FDC -#undef COND_CMD_FDOS -#undef COND_CMD_HWFLOW -#undef COND_CMD_IDE -#undef COND_CMD_I2C -#undef COND_CMD_JFFS2 -#undef COND_CMD_KGDB -#undef COND_CMD_NAND -#undef COND_CMD_NFS -#undef COND_CMD_MMC -#undef COND_CMD_MII -#undef COND_CMD_PCI -#undef COND_CMD_PCMCIA -#undef COND_CMD_SCSI -#undef COND_CMD_SPI -#undef COND_CMD_VFD -#undef COND_CMD_USB -#undef COND_CMD_XIMG - +#include <config_cmd_default.h> + +#define CONFIG_CMD_CDP +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_DISPLAY +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_PING +#define CONFIG_CMD_PORTIO +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_REISER +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_XIMG /*------------------------------------------------------------------------ * KGDB diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h index 85d2bb3f51..bb87fae8c4 100644 --- a/include/configs/IDS8247.h +++ b/include/configs/IDS8247.h @@ -120,6 +120,17 @@ #define CFG_NS16550_COM1 (CFG_UART_BASE + 0x8000) + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + +#define OF_CPU "PowerPC,8247@0" +#define OF_SOC "soc@f0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc@f0000000/serial8250@e0008000" + + /* * select ethernet configuration * @@ -133,16 +144,18 @@ #undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ #define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ #undef CONFIG_ETHER_NONE /* define if ether on something else */ -#define CONFIG_ETHER_INDEX 2 /* which SCC/FCC channel for ethernet */ +#define CONFIG_ETHER_INDEX 1 /* which SCC/FCC channel for ethernet */ +#define CONFIG_ETHER_ON_FCC1 +#define FCC_ENET /* - * - Rx-CLK is CLK13 - * - Tx-CLK is CLK14 + * - Rx-CLK is CLK10 + * - Tx-CLK is CLK9 * - RAM for BD/Buffers is on the 60x Bus (see 28-13) * - Enable Full Duplex in FSMR */ -# define CFG_CMXFCR_MASK (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK) -# define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14) +# define CFG_CMXFCR_MASK (CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK) +# define CFG_CMXFCR_VALUE (CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK9) # define CFG_CPMFCR_RAMTYPE 0 # define CFG_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB) @@ -166,6 +179,8 @@ #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_RTC_PCF8563 +#define CFG_I2C_RTC_ADDR 0x51 /* * Command line configuration. @@ -211,7 +226,10 @@ */ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CFG_FLASH_BANKS_LIST { 0xFF800000 } +#define CFG_MAX_FLASH_BANKS_DETECT 1 /* What should the base address of the main FLASH be and how big is * it (in MBytes)? This must contain TEXT_BASE from board/ids8247/config.mk * The main FLASH is whichever is connected to *CS0. @@ -227,7 +245,7 @@ * FLASH organization */ #define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */ -#define CFG_MAX_FLASH_SECT 64 /* max num of sects on one chip */ +#define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */ #define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ @@ -511,12 +529,12 @@ */ #define CFG_OR2 ((~(CFG_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\ ORxS_BPD_4 |\ - ORxS_ROWST_PBI0_A10 |\ + ORxS_ROWST_PBI0_A9 |\ ORxS_NUMR_12) -#define CFG_PSDMR (PSDMR_SDAM_A13_IS_A5 |\ +#define CFG_PSDMR (PSDMR_SDAM_A14_IS_A5 |\ PSDMR_BSMA_A15_A17 |\ - PSDMR_SDA10_PBI0_A11 |\ + PSDMR_SDA10_PBI0_A10 |\ PSDMR_RFRC_5_CLK |\ PSDMR_PRETOACT_2W |\ PSDMR_ACTTORW_2W |\ diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h index 46edd08a91..e92069b5a9 100644 --- a/include/configs/LANTEC.h +++ b/include/configs/LANTEC.h @@ -87,37 +87,23 @@ /* * Command line configuration. */ -#include <config_cmd_all.h> - -#undef CONFIG_CMD_BEDBUG -#undef CONFIG_CMD_BMP -#undef CONFIG_CMD_BSP -#undef CONFIG_CMD_DISPLAY -#undef CONFIG_CMD_DOC -#undef CONFIG_CMD_DTT -#undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_ELF -#undef CONFIG_CMD_EXT2 -#undef CONFIG_CMD_FDC -#undef CONFIG_CMD_FDOS -#undef CONFIG_CMD_HWFLOW -#undef CONFIG_CMD_I2C -#undef CONFIG_CMD_IDE -#undef CONFIG_CMD_IRQ -#undef CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_KGDB -#undef CONFIG_CMD_MFSL -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_MMC -#undef CONFIG_CMD_NAND -#undef CONFIG_CMD_PCI -#undef CONFIG_CMD_PCMCIA -#undef CONFIG_CMD_REISER -#undef CONFIG_CMD_SCSI -#undef CONFIG_CMD_SPI -#undef CONFIG_CMD_UNIVERSE -#undef CONFIG_CMD_USB -#undef CONFIG_CMD_VFD +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_CDP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_FAT +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_PING +#define CONFIG_CMD_PORTIO +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + #undef CONFIG_CMD_XIMG #if !(CONFIG_LANTEC >= 2) diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h index 48170e7a35..f5e1b646ca 100644 --- a/include/configs/M5253EVBE.h +++ b/include/configs/M5253EVBE.h @@ -146,7 +146,7 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ #define CFG_SDRAM_BASE 0x00000000 -#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ +#define CFG_SDRAM_SIZE 8 /* SDRAM size in MB */ #ifdef CONFIG_MONITOR_IS_IN_RAM #define CFG_MONITOR_BASE 0x20000 diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index 3c17c1ea14..7bb9f60f76 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -163,7 +163,7 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ #define CFG_SDRAM_BASE 0x00000000 -#define CFG_SDRAM_SIZE 8 /* SDRAM size in MB */ +#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ #define CFG_FLASH_BASE 0xffe00000 #define CFG_INT_FLASH_BASE 0xf0000000 #define CFG_INT_FLASH_ENABLE 0x21 diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index d3b160505b..47d74a3c37 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -175,7 +175,7 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ #define CFG_SDRAM_BASE 0x40000000 -#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ +#define CFG_SDRAM_SIZE 32 /* SDRAM size in MB */ #define CFG_SDRAM_CFG1 0x53722730 #define CFG_SDRAM_CFG2 0x56670000 #define CFG_SDRAM_CTRL 0xE1092000 diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 6f4859c238..db309584b9 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -27,8 +27,8 @@ * board/config.h - configuration options, board specific */ -#ifndef _JAMICA54455_H -#define _JAMICA54455_H +#ifndef _M54455EVB_H +#define _M54455EVB_H /* * High Level Configuration Options @@ -75,7 +75,7 @@ #define CONFIG_CMD_MISC #define CONFIG_CMD_MII #define CONFIG_CMD_NET -#define CONFIG_CMD_PCI +#undef CONFIG_CMD_PCI #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO @@ -129,8 +129,8 @@ "u-boot=u-boot.bin\0" \ "load=tftp ${loadaddr) ${u-boot}\0" \ "upd=run load; run prog\0" \ - "prog=prot off 0 2ffff;" \ - "era 0 2ffff;" \ + "prog=prot off 4000000 402ffff;" \ + "era 4000000 402ffff;" \ "cp.b ${loadaddr} 0 ${filesize};" \ "save\0" \ "" @@ -174,6 +174,7 @@ #define CFG_IMMR CFG_MBAR /* PCI */ +#ifdef CONFIG_CMD_PCI #define CONFIG_PCI 1 #define CFG_PCI_MEM_BUS 0xA0000000 @@ -187,6 +188,7 @@ #define CFG_PCI_CFG_BUS 0xB0000000 #define CFG_PCI_CFG_PHYS CFG_PCI_CFG_BUS #define CFG_PCI_CFG_SIZE 0x01000000 +#endif /* FPGA - Spartan 2 */ /* experiment @@ -268,8 +270,6 @@ /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash */ -#define CFG_ENV_OFFSET 0x4000 -#define CFG_ENV_SECT_SIZE 0x2000 #define CFG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_OVERWRITE 1 #undef CFG_ENV_IS_EMBEDDED @@ -278,13 +278,17 @@ * FLASH organization */ #ifdef CFG_ATMEL_BOOT -# define CFG_FLASH_BASE 0 +# define CFG_FLASH_BASE CFG_CS0_BASE # define CFG_FLASH0_BASE CFG_CS0_BASE # define CFG_FLASH1_BASE CFG_CS1_BASE +# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x4000) +# define CFG_ENV_SECT_SIZE 0x2000 #else # define CFG_FLASH_BASE CFG_FLASH0_BASE # define CFG_FLASH0_BASE CFG_CS1_BASE # define CFG_FLASH1_BASE CFG_CS0_BASE +# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x60000) +# define CFG_ENV_SECT_SIZE 0x20000 #endif /* M54455EVB has one non CFI flash, defined CFG_FLASH_CFI will cause the system @@ -328,9 +332,9 @@ * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. */ #ifdef CFG_ATMEL_BOOT -# define CONFIG_JFFS2_DEV "nor0" +# define CONFIG_JFFS2_DEV "nor1" # define CONFIG_JFFS2_PART_SIZE 0x01000000 -# define CONFIG_JFFS2_PART_OFFSET CFG_FLASH1_BASE +# define CONFIG_JFFS2_PART_OFFSET (CFG_FLASH1_BASE + 0x500000) #else # define CONFIG_JFFS2_DEV "nor0" # define CONFIG_JFFS2_PART_SIZE (0x01000000 - 0x500000) @@ -356,20 +360,20 @@ #ifdef CFG_ATMEL_BOOT /* Atmel Flash */ -#define CFG_CS0_BASE 0 +#define CFG_CS0_BASE 0x04000000 #define CFG_CS0_MASK 0x00070001 #define CFG_CS0_CTRL 0x00001140 /* Intel Flash */ -#define CFG_CS1_BASE 0x04000000 +#define CFG_CS1_BASE 0x00000000 #define CFG_CS1_MASK 0x01FF0001 -#define CFG_CS1_CTRL 0x003F3D60 +#define CFG_CS1_CTRL 0x00000D60 #define CFG_ATMEL_BASE CFG_CS0_BASE #else /* Intel Flash */ -#define CFG_CS0_BASE 0 +#define CFG_CS0_BASE 0x00000000 #define CFG_CS0_MASK 0x01FF0001 -#define CFG_CS0_CTRL 0x003F3D60 +#define CFG_CS0_CTRL 0x00000D60 /* Atmel Flash */ #define CFG_CS1_BASE 0x04000000 #define CFG_CS1_MASK 0x00070001 @@ -388,4 +392,4 @@ #define CFG_CS3_MASK 0x00070001 #define CFG_CS3_CTRL 0x00000020 -#endif /* _JAMICA54455_H */ +#endif /* _M54455EVB_H */ diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h index 713518d0da..23508f9f5a 100644 --- a/include/configs/MPC8260ADS.h +++ b/include/configs/MPC8260ADS.h @@ -209,35 +209,25 @@ /* * Command line configuration. */ -#include <config_cmd_all.h> - -#undef CONFIG_CMD_BEDBUG -#undef CONFIG_CMD_BMP -#undef CONFIG_CMD_BSP -#undef CONFIG_CMD_DATE -#undef CONFIG_CMD_DISPLAY -#undef CONFIG_CMD_DOC -#undef CONFIG_CMD_DTT -#undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_ELF -#undef CONFIG_CMD_EXT2 -#undef CONFIG_CMD_FAT -#undef CONFIG_CMD_FDC -#undef CONFIG_CMD_FDOS -#undef CONFIG_CMD_HWFLOW -#undef CONFIG_CMD_IDE -#undef CONFIG_CMD_KGDB -#undef CONFIG_CMD_MFSL -#undef CONFIG_CMD_MMC -#undef CONFIG_CMD_NAND -#undef CONFIG_CMD_PCMCIA -#undef CONFIG_CMD_REISER -#undef CONFIG_CMD_SCSI -#undef CONFIG_CMD_SPI -#undef CONFIG_CMD_SNTP -#undef CONFIG_CMD_UNIVERSE -#undef CONFIG_CMD_USB -#undef CONFIG_CMD_VFD +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_CDP +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_PORTIO +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_SDRAM + #undef CONFIG_CMD_XIMG #if CONFIG_ADSTYPE == CFG_8272ADS diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 4e061bd9ff..8dda6651ef 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -316,6 +316,7 @@ extern unsigned long get_clock_freq(void); #define OF_SOC "soc8541@e0000000" #define OF_TBCLK (bd->bi_busfreq / 8) #define OF_STDOUT_PATH "/soc8541@e0000000/serial@4600" +#define OF_PCI "pci@e0008000" /* * I2C diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 6083715189..4edc7fd2b6 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -340,6 +340,7 @@ extern unsigned long get_clock_freq(void); #define OF_SOC "soc8548@e0000000" #define OF_TBCLK (bd->bi_busfreq / 8) #define OF_STDOUT_PATH "/soc8548@e0000000/serial@4600" +#define OF_PCI "pci@e0008000" /* * I2C diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 1d1b7c9079..c414bf033e 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -316,6 +316,7 @@ extern unsigned long get_clock_freq(void); #define OF_SOC "soc8555@e0000000" #define OF_TBCLK (bd->bi_busfreq / 8) #define OF_STDOUT_PATH "/soc8555@e0000000/serial@4600" +#define OF_PCI "pci@e0008000" /* * I2C diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index ba744e99f8..548e1582a8 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -297,7 +297,7 @@ extern unsigned long get_clock_freq(void); #define OF_SOC "soc8568@e0000000" #define OF_QE "qe@e0080000" #define OF_TBCLK (bd->bi_busfreq / 8) -#define OF_STDOUT_PATH "/soc8568@e0000000/serial@4600" +#define OF_STDOUT_PATH "/soc8568@e0000000/serial@4500" /* * I2C diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 7d8a380dc0..aa6dbc47ad 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -346,6 +346,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CFG_USB_EVENT_POLL 1 #define CFG_USB_OHCI_SLOT_NAME "ohci_pci" #define CFG_USB_OHCI_MAX_ROOT_PORTS 15 +#define CFG_OHCI_SWAP_REG_ACCESS 1 #if !defined(CONFIG_PCI_PNP) #define PCI_ENET0_IOADDR 0xe0000000 @@ -544,6 +545,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_CMD_PCI #define CONFIG_CMD_SCSI #define CONFIG_CMD_EXT2 + #define CONFIG_CMD_USB #endif diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h index 2f6de81551..fa32e33796 100644 --- a/include/configs/RBC823.h +++ b/include/configs/RBC823.h @@ -105,36 +105,31 @@ /* * Command line configuration. */ -#include <config_cmd_all.h> - -#undef CONFIG_CMD_BSP -#undef CONFIG_CMD_DATE -#undef CONFIG_CMD_DISPLAY -#undef CONFIG_CMD_DTT -#undef CONFIG_CMD_EXT2 -#undef CONFIG_CMD_FDC -#undef CONFIG_CMD_FDOS -#undef CONFIG_CMD_HWFLOW -#undef CONFIG_CMD_IDE -#undef CONFIG_CMD_IRQ -#undef CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_MFSL -#undef CONFIG_CMD_MMC -#undef CONFIG_CMD_NAND -#undef CONFIG_CMD_PCI -#undef CONFIG_CMD_PCMCIA -#undef CONFIG_CMD_REISER -#undef CONFIG_CMD_SCSI +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_BMP +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_CDP +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_DOC +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_KGDB +#define CONFIG_CMD_PING +#define CONFIG_CMD_PORTIO +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_SDRAM + #undef CONFIG_CMD_SETGETDCR -#undef CONFIG_CMD_SNTP -#undef CONFIG_CMD_SPI -#undef CONFIG_CMD_UNIVERSE -#undef CONFIG_CMD_USB -#undef CONFIG_CMD_VFD #undef CONFIG_CMD_XIMG - /* * Miscellaneous configurable options */ diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index 1809fc5d86..b33e26fe01 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -114,15 +114,10 @@ #define CONFIG_AUTOBOOT_STOP_STR " " /* - * These are "locally administered ethernet addresses" generated by - * ./tools/gen_eth_addr - * - * After booting the board for the first time, new addresses should be - * generated and assigned to the environment variables "ethaddr" and - * "eth1addr". + * After booting the board for the first time, new ethernet addresses + * should be generated and assigned to the environment variables + * "ethaddr" and "eth1addr". This is normally done during production. */ -#define CONFIG_ETHADDR 6a:87:71:14:cd:cb -#define CONFIG_ETH1ADDR ca:f8:15:e6:3e:e6 #define CONFIG_OVERWRITE_ETHADDR_ONCE 1 #define CONFIG_NET_MULTI 1 diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h index 025c24960d..490db5fefd 100644 --- a/include/configs/ep8260.h +++ b/include/configs/ep8260.h @@ -303,38 +303,29 @@ /* * Command line configuration. */ -#include <config_cmd_all.h> +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_CDP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_PING +#define CONFIG_CMD_PORTIO +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP -#undef CONFIG_CMD_BMP -#undef CONFIG_CMD_BSP #undef CONFIG_CMD_DCR -#undef CONFIG_CMD_DHCP -#undef CONFIG_CMD_DISPLAY -#undef CONFIG_CMD_DOC -#undef CONFIG_CMD_DTT -#undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_EXT2 -#undef CONFIG_CMD_FDC -#undef CONFIG_CMD_FDOS -#undef CONFIG_CMD_HWFLOW -#undef CONFIG_CMD_IDE -#undef CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_KGDB -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_MFSL -#undef CONFIG_CMD_MMC -#undef CONFIG_CMD_NAND -#undef CONFIG_CMD_PCI -#undef CONFIG_CMD_PCMCIA -#undef CONFIG_CMD_REISER -#undef CONFIG_CMD_SCSI -#undef CONFIG_CMD_SPI -#undef CONFIG_CMD_UNIVERSE -#undef CONFIG_CMD_USB -#undef CONFIG_CMD_VFD #undef CONFIG_CMD_XIMG - /* Where do the internal registers live? */ #define CFG_IMMR 0xF0000000 #define CFG_DEFAULT_IMMR 0x00010000 diff --git a/include/configs/hymod.h b/include/configs/hymod.h index 2547afb3cf..01e7970162 100644 --- a/include/configs/hymod.h +++ b/include/configs/hymod.h @@ -185,33 +185,34 @@ /* * Command line configuration. */ -#include <config_cmd_all.h> - -#undef CONFIG_CMD_BEDBUG -#undef CONFIG_CMD_BMP -#undef CONFIG_CMD_DISPLAY -#undef CONFIG_CMD_DOC -#undef CONFIG_CMD_EXT2 -#undef CONFIG_CMD_FDC -#undef CONFIG_CMD_FDOS +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BSP +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_CDP +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_DTT +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_KGDB +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_PORTIO +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + #undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_HWFLOW -#undef CONFIG_CMD_IDE -#undef CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_NAND -#undef CONFIG_CMD_MFSL -#undef CONFIG_CMD_MMC -#undef CONFIG_CMD_PCMCIA -#undef CONFIG_CMD_PCI -#undef CONFIG_CMD_USB -#undef CONFIG_CMD_REISER -#undef CONFIG_CMD_SCSI -#undef CONFIG_CMD_SPI -#undef CONFIG_CMD_UNIVERSE -#undef CONFIG_CMD_VFD #undef CONFIG_CMD_XIMG - #ifdef DEBUG #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ #else diff --git a/lib_m68k/m68k_linux.c b/lib_m68k/m68k_linux.c index bea97441b1..cc974c2d60 100644 --- a/lib_m68k/m68k_linux.c +++ b/lib_m68k/m68k_linux.c @@ -26,6 +26,7 @@ #include <image.h> #include <zlib.h> #include <bzlib.h> +#include <watchdog.h> #include <environment.h> #include <asm/byteorder.h> @@ -36,6 +37,8 @@ DECLARE_GLOBAL_DATA_PTR; #define LINUX_MAX_ENVS 256 #define LINUX_MAX_ARGS 256 +#define CHUNKSZ (64 * 1024) + #ifdef CONFIG_SHOW_BOOT_PROGRESS # include <status_led.h> # define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) diff --git a/mips_config.mk b/mips_config.mk index d8aa5fa777..67fb67d291 100644 --- a/mips_config.mk +++ b/mips_config.mk @@ -22,3 +22,28 @@ # PLATFORM_CPPFLAGS += -DCONFIG_MIPS -D__MIPS__ + +# +# From Linux arch/mips/Makefile +# +# GCC uses -G 0 -mabicalls -fpic as default. We don't want PIC in the kernel +# code since it only slows down the whole thing. At some point we might make +# use of global pointer optimizations but their use of $28 conflicts with +# the current pointer optimization. +# +# The DECStation requires an ECOFF kernel for remote booting, other MIPS +# machines may also. Since BFD is incredibly buggy with respect to +# crossformat linking we rely on the elf2ecoff tool for format conversion. +# +# cflags-y += -G 0 -mno-abicalls -fno-pic -pipe +# cflags-y += -msoft-float +# LDFLAGS_vmlinux += -G 0 -static -n -nostdlib +# MODFLAGS += -mlong-calls +# + +# +# Meanwhile, U-Boot rely on PIC. We add proper switches explicitly. +# +PLATFORM_CPPFLAGS += -G 0 -mabicalls -fpic -pipe +PLATFORM_CPPFLAGS += -msoft-float +PLATFORM_LDFLAGS += -G 0 -static -n -nostdlib diff --git a/net/bootp.c b/net/bootp.c index 749d3e5e0c..55dcc81db6 100644 --- a/net/bootp.c +++ b/net/bootp.c @@ -850,9 +850,9 @@ static void DhcpSendRequestPkt(Bootp_t *bp_offer) bp->bp_hlen = HWL_ETHER; bp->bp_hops = 0; bp->bp_secs = htons(get_timer(0) / CFG_HZ); - NetCopyIP(&bp->bp_ciaddr, &bp_offer->bp_ciaddr); /* both in network byte order */ - NetCopyIP(&bp->bp_yiaddr, &bp_offer->bp_yiaddr); - NetCopyIP(&bp->bp_siaddr, &bp_offer->bp_siaddr); + /* Do not set the client IP, your IP, or server IP yet, since it hasn't been ACK'ed by + * the server yet */ + /* * RFC3046 requires Relay Agents to discard packets with * nonzero and offered giaddr @@ -870,7 +870,9 @@ static void DhcpSendRequestPkt(Bootp_t *bp_offer) /* * Copy options from OFFER packet if present */ - NetCopyIP(&OfferedIP, &bp->bp_yiaddr); + + /* Copy offered IP into the parameters request list */ + NetCopyIP(&OfferedIP, &bp_offer->bp_yiaddr); extlen = DhcpExtended((u8 *)bp->bp_vend, DHCP_REQUEST, NetDHCPServerIP, OfferedIP); pktlen = BOOTP_SIZE - sizeof(bp->bp_vend) + extlen; @@ -977,6 +979,6 @@ void DhcpRequest(void) { BootpRequest(); } -#endif +#endif /* CONFIG_CMD_DHCP */ -#endif +#endif /* CONFIG_CMD_NET */ @@ -405,7 +405,6 @@ rpc_lookup_reply (int prog, uchar *pkt, unsigned len) if (rpc_pkt.u.reply.rstatus || rpc_pkt.u.reply.verifier || - rpc_pkt.u.reply.astatus || rpc_pkt.u.reply.astatus) { return -1; } |
