summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/arm/cpu/arm1136/mx31/devices.c4
-rw-r--r--arch/arm/include/asm/arch-mx25/imx-regs.h10
-rw-r--r--arch/arm/include/asm/arch-mx27/imx-regs.h8
-rw-r--r--arch/arm/include/asm/arch-mx31/imx-regs.h6
-rw-r--r--arch/arm/include/asm/arch-mx35/imx-regs.h6
-rw-r--r--arch/arm/include/asm/arch-mx5/imx-regs.h6
-rw-r--r--drivers/serial/serial_mxc.c37
-rw-r--r--include/configs/efikamx.h2
-rw-r--r--include/configs/flea3.h2
-rw-r--r--include/configs/imx27lite-common.h2
-rw-r--r--include/configs/imx31_litekit.h4
-rw-r--r--include/configs/imx31_phycore.h2
-rw-r--r--include/configs/mx25pdk.h2
-rw-r--r--include/configs/mx31ads.h4
-rw-r--r--include/configs/mx31pdk.h2
-rw-r--r--include/configs/mx35pdk.h2
-rw-r--r--include/configs/mx51evk.h2
-rw-r--r--include/configs/mx53ard.h2
-rw-r--r--include/configs/mx53evk.h2
-rw-r--r--include/configs/mx53loco.h2
-rw-r--r--include/configs/mx53smd.h2
-rw-r--r--include/configs/qong.h4
-rw-r--r--include/configs/tt01.h2
-rw-r--r--include/configs/tx25.h2
-rw-r--r--include/configs/vision2.h2
-rw-r--r--include/configs/zmx25.h2
26 files changed, 47 insertions, 74 deletions
diff --git a/arch/arm/cpu/arm1136/mx31/devices.c b/arch/arm/cpu/arm1136/mx31/devices.c
index b42dac3fbe..2ebee2e960 100644
--- a/arch/arm/cpu/arm1136/mx31/devices.c
+++ b/arch/arm/cpu/arm1136/mx31/devices.c
@@ -27,7 +27,6 @@
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
-#ifdef CONFIG_SYS_MX31_UART1
void mx31_uart1_hw_init(void)
{
/* setup pins for UART1 */
@@ -36,9 +35,7 @@ void mx31_uart1_hw_init(void)
mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
mx31_gpio_mux(MUX_CTS1__UART1_CTS_B);
}
-#endif
-#ifdef CONFIG_SYS_MX31_UART2
void mx31_uart2_hw_init(void)
{
/* setup pins for UART2 */
@@ -47,7 +44,6 @@ void mx31_uart2_hw_init(void)
mx31_gpio_mux(MUX_RTS2__UART2_RTS_B);
mx31_gpio_mux(MUX_CTS2__UART2_CTS_B);
}
-#endif
#ifdef CONFIG_MXC_SPI
/*
diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h
index eece138b45..7f9449b2d0 100644
--- a/arch/arm/include/asm/arch-mx25/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx25/imx-regs.h
@@ -180,8 +180,8 @@ struct aips_regs {
#define IMX_I2C3_BASE (0x43F84000)
#define IMX_CAN1_BASE (0x43F88000)
#define IMX_CAN2_BASE (0x43F8C000)
-#define IMX_UART1_BASE (0x43F90000)
-#define IMX_UART2_BASE (0x43F94000)
+#define UART1_BASE (0x43F90000)
+#define UART2_BASE (0x43F94000)
#define IMX_I2C2_BASE (0x43F98000)
#define IMX_OWIRE_BASE (0x43F9C000)
#define IMX_CSPI1_BASE (0x43FA4000)
@@ -197,15 +197,15 @@ struct aips_regs {
/* SPBA */
#define IMX_SPBA_BASE (0x50000000)
#define IMX_CSPI3_BASE (0x50004000)
-#define IMX_UART4_BASE (0x50008000)
-#define IMX_UART3_BASE (0x5000C000)
+#define UART4_BASE (0x50008000)
+#define UART3_BASE (0x5000C000)
#define IMX_CSPI2_BASE (0x50010000)
#define IMX_SSI2_BASE (0x50014000)
#define IMX_ESAI_BASE (0x50018000)
#define IMX_ATA_DMA_BASE (0x50020000)
#define IMX_SIM1_BASE (0x50024000)
#define IMX_SIM2_BASE (0x50028000)
-#define IMX_UART5_BASE (0x5002C000)
+#define UART5_BASE (0x5002C000)
#define IMX_TSC_BASE (0x50030000)
#define IMX_SSI1_BASE (0x50034000)
#define IMX_FEC_BASE (0x50038000)
diff --git a/arch/arm/include/asm/arch-mx27/imx-regs.h b/arch/arm/include/asm/arch-mx27/imx-regs.h
index 83ab216665..ced5b2a38c 100644
--- a/arch/arm/include/asm/arch-mx27/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx27/imx-regs.h
@@ -224,10 +224,10 @@ struct fuse_bank0_regs {
#define IMX_TIM1_BASE (0x03000 + IMX_IO_BASE)
#define IMX_TIM2_BASE (0x04000 + IMX_IO_BASE)
#define IMX_TIM3_BASE (0x05000 + IMX_IO_BASE)
-#define IMX_UART1_BASE (0x0a000 + IMX_IO_BASE)
-#define IMX_UART2_BASE (0x0b000 + IMX_IO_BASE)
-#define IMX_UART3_BASE (0x0c000 + IMX_IO_BASE)
-#define IMX_UART4_BASE (0x0d000 + IMX_IO_BASE)
+#define UART1_BASE (0x0a000 + IMX_IO_BASE)
+#define UART2_BASE (0x0b000 + IMX_IO_BASE)
+#define UART3_BASE (0x0c000 + IMX_IO_BASE)
+#define UART4_BASE (0x0d000 + IMX_IO_BASE)
#define IMX_I2C1_BASE (0x12000 + IMX_IO_BASE)
#define IMX_GPIO_BASE (0x15000 + IMX_IO_BASE)
#define IMX_TIM4_BASE (0x19000 + IMX_IO_BASE)
diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h
index 0147920e4b..6a517ddd93 100644
--- a/arch/arm/include/asm/arch-mx31/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx31/imx-regs.h
@@ -600,6 +600,12 @@ struct esdc_regs {
#define WEIM_ESDCFG1 0xB800100C
#define WEIM_ESDMISC 0xB8001010
+#define UART1_BASE 0x43F90000
+#define UART2_BASE 0x43F94000
+#define UART3_BASE 0x5000C000
+#define UART4_BASE 0x43FB0000
+#define UART5_BASE 0x43FB4000
+
#define ESDCTL_SDE (1 << 31)
#define ESDCTL_CMD_RW (0 << 28)
#define ESDCTL_CMD_PRECHARGE (1 << 28)
diff --git a/arch/arm/include/asm/arch-mx35/imx-regs.h b/arch/arm/include/asm/arch-mx35/imx-regs.h
index 25c324eb36..df74508a93 100644
--- a/arch/arm/include/asm/arch-mx35/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx35/imx-regs.h
@@ -42,8 +42,8 @@
#define I2C_BASE_ADDR 0x43F80000
#define I2C3_BASE_ADDR 0x43F84000
#define ATA_BASE_ADDR 0x43F8C000
-#define UART1_BASE_ADDR 0x43F90000
-#define UART2_BASE_ADDR 0x43F94000
+#define UART1_BASE 0x43F90000
+#define UART2_BASE 0x43F94000
#define I2C2_BASE_ADDR 0x43F98000
#define CSPI1_BASE_ADDR 0x43FA4000
#define IOMUXC_BASE_ADDR 0x43FAC000
@@ -52,7 +52,7 @@
* SPBA
*/
#define SPBA_BASE_ADDR 0x50000000
-#define UART3_BASE_ADDR 0x5000C000
+#define UART3_BASE 0x5000C000
#define CSPI2_BASE_ADDR 0x50010000
#define ATA_DMA_BASE_ADDR 0x50020000
#define FEC_BASE_ADDR 0x50038000
diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h
index d069209b58..0ee88d25b7 100644
--- a/arch/arm/include/asm/arch-mx5/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx5/imx-regs.h
@@ -54,7 +54,7 @@
*/
#define MMC_SDHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00004000)
#define MMC_SDHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00008000)
-#define UART3_BASE_ADDR (SPBA0_BASE_ADDR + 0x0000C000)
+#define UART3_BASE (SPBA0_BASE_ADDR + 0x0000C000)
#define CSPI1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00010000)
#define SSI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00014000)
#define MMC_SDHC3_BASE_ADDR (SPBA0_BASE_ADDR + 0x00020000)
@@ -83,8 +83,8 @@
#define EPIT2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B0000)
#define PWM1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B4000)
#define PWM2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B8000)
-#define UART1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000BC000)
-#define UART2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000C0000)
+#define UART1_BASE (AIPS1_BASE_ADDR + 0x000BC000)
+#define UART2_BASE (AIPS1_BASE_ADDR + 0x000C0000)
#define SRC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000D0000)
#define CCM_BASE_ADDR (AIPS1_BASE_ADDR + 0x000D4000)
#define GPC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000D8000)
diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c
index dcb4bd16d8..af00b9c0ec 100644
--- a/drivers/serial/serial_mxc.c
+++ b/drivers/serial/serial_mxc.c
@@ -24,41 +24,12 @@
#define __REG(x) (*((volatile u32 *)(x)))
-#if defined(CONFIG_SYS_MX31_UART1) || defined(CONFIG_SYS_MX25_UART1)
-#define UART_PHYS 0x43f90000
-#elif defined(CONFIG_SYS_MX31_UART2) || defined(CONFIG_SYS_MX25_UART2)
-#define UART_PHYS 0x43f94000
-#elif defined(CONFIG_SYS_MX31_UART3) || defined(CONFIG_SYS_MX25_UART3)
-#define UART_PHYS 0x5000c000
-#elif defined(CONFIG_SYS_MX31_UART4) || defined(CONFIG_SYS_MX25_UART4)
-#define UART_PHYS 0x43fb0000
-#elif defined(CONFIG_SYS_MX31_UART5) || defined(CONFIG_SYS_MX25_UART5)
-#define UART_PHYS 0x43fb4000
-#elif defined(CONFIG_SYS_MX27_UART1)
-#define UART_PHYS 0x1000a000
-#elif defined(CONFIG_SYS_MX27_UART2)
-#define UART_PHYS 0x1000b000
-#elif defined(CONFIG_SYS_MX27_UART3)
-#define UART_PHYS 0x1000c000
-#elif defined(CONFIG_SYS_MX27_UART4)
-#define UART_PHYS 0x1000d000
-#elif defined(CONFIG_SYS_MX27_UART5)
-#define UART_PHYS 0x1001b000
-#elif defined(CONFIG_SYS_MX27_UART6)
-#define UART_PHYS 0x1001c000
-#elif defined(CONFIG_SYS_MX35_UART1) || defined(CONFIG_SYS_MX51_UART1) || \
- defined(CONFIG_SYS_MX53_UART1)
-#define UART_PHYS UART1_BASE_ADDR
-#elif defined(CONFIG_SYS_MX35_UART2) || defined(CONFIG_SYS_MX51_UART2) || \
- defined(CONFIG_SYS_MX53_UART2)
-#define UART_PHYS UART2_BASE_ADDR
-#elif defined(CONFIG_SYS_MX35_UART3) || defined(CONFIG_SYS_MX51_UART3) || \
- defined(CONFIG_SYS_MX53_UART3)
-#define UART_PHYS UART3_BASE_ADDR
-#else
-#error "define CONFIG_SYS_MXxx_UARTx to use the MXC UART driver"
+#ifndef CONFIG_MXC_UART_BASE
+#error "define CONFIG_MXC_UART_BASE to use the MXC UART driver"
#endif
+#define UART_PHYS CONFIG_MXC_UART_BASE
+
#ifdef CONFIG_SERIAL_MULTI
#warning "MXC driver does not support MULTI serials."
#endif
diff --git a/include/configs/efikamx.h b/include/configs/efikamx.h
index a07c8b58e3..2b069d6b7a 100644
--- a/include/configs/efikamx.h
+++ b/include/configs/efikamx.h
@@ -85,7 +85,7 @@
* Hardware drivers
*/
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX51_UART1
+#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
diff --git a/include/configs/flea3.h b/include/configs/flea3.h
index d88c578a70..20100c2148 100644
--- a/include/configs/flea3.h
+++ b/include/configs/flea3.h
@@ -77,7 +77,7 @@
* UART (console)
*/
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX35_UART3
+#define CONFIG_MXC_UART_BASE UART3_BASE
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h
index 6953a800d5..2af4e7af31 100644
--- a/include/configs/imx27lite-common.h
+++ b/include/configs/imx27lite-common.h
@@ -102,7 +102,7 @@
* Serial Driver info
*/
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX27_UART1
+#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h
index 1455ea247a..bbcbce1200 100644
--- a/include/configs/imx31_litekit.h
+++ b/include/configs/imx31_litekit.h
@@ -63,8 +63,8 @@
* Hardware drivers
*/
-#define CONFIG_MXC_UART 1
-#define CONFIG_SYS_MX31_UART1 1
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_MXC_GPIO
#define CONFIG_HARD_SPI 1
diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
index 1b75197c58..3153eb5b39 100644
--- a/include/configs/imx31_phycore.h
+++ b/include/configs/imx31_phycore.h
@@ -59,7 +59,7 @@
#define CONFIG_SYS_I2C_SLAVE 0xfe
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX31_UART1
+#define CONFIG_MXC_UART_BASE UART1_BASE
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h
index 8414376edd..d1ba02b6ee 100644
--- a/include/configs/mx25pdk.h
+++ b/include/configs/mx25pdk.h
@@ -54,7 +54,7 @@
/* Serial Info */
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX25_UART1
+#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
index 7e011aea9d..87638a4fa5 100644
--- a/include/configs/mx31ads.h
+++ b/include/configs/mx31ads.h
@@ -60,8 +60,8 @@
* Hardware drivers
*/
-#define CONFIG_MXC_UART 1
-#define CONFIG_SYS_MX31_UART1 1
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_HARD_SPI 1
#define CONFIG_MXC_SPI 1
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index 4253c3e2bc..4da6020c8c 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -61,7 +61,7 @@
*/
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX31_UART1
+#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_HW_WATCHDOG
#define CONFIG_MXC_GPIO
diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index 32ed6096ae..0c62b9fdfb 100644
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -85,7 +85,7 @@
* UART (console)
*/
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX35_UART1
+#define CONFIG_MXC_UART_BASE UART1_BASE
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index 7c7544f5a8..dd53f48b9a 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -59,7 +59,7 @@
* Hardware drivers
*/
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX51_UART1
+#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_MXC_GPIO
/*
diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h
index 15dfcb49ed..f48a41ebc5 100644
--- a/include/configs/mx53ard.h
+++ b/include/configs/mx53ard.h
@@ -44,7 +44,7 @@
#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX53_UART1
+#define CONFIG_MXC_UART_BASE UART1_BASE
/* I2C Configs */
#define CONFIG_CMD_I2C
diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h
index 7c491360f2..11fe6efe62 100644
--- a/include/configs/mx53evk.h
+++ b/include/configs/mx53evk.h
@@ -47,7 +47,7 @@
#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX53_UART1
+#define CONFIG_MXC_UART_BASE UART1_BASE
/* I2C Configs */
#define CONFIG_CMD_I2C
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index d6990107db..537649ee16 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -45,7 +45,7 @@
#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX53_UART1
+#define CONFIG_MXC_UART_BASE UART1_BASE
/* MMC Configs */
#define CONFIG_FSL_ESDHC
diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h
index 48b32ddab6..032f72261e 100644
--- a/include/configs/mx53smd.h
+++ b/include/configs/mx53smd.h
@@ -44,7 +44,7 @@
#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX53_UART1
+#define CONFIG_MXC_UART_BASE UART1_BASE
/* I2C Configs */
#define CONFIG_CMD_I2C
diff --git a/include/configs/qong.h b/include/configs/qong.h
index 3346802d13..3e36bb0788 100644
--- a/include/configs/qong.h
+++ b/include/configs/qong.h
@@ -49,8 +49,8 @@
* Hardware drivers
*/
-#define CONFIG_MXC_UART 1
-#define CONFIG_SYS_MX31_UART1 1
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_MXC_GPIO
#define CONFIG_HW_WATCHDOG
diff --git a/include/configs/tt01.h b/include/configs/tt01.h
index 6ef25cd647..a553712699 100644
--- a/include/configs/tt01.h
+++ b/include/configs/tt01.h
@@ -148,7 +148,7 @@
* make sure that the transceiver is enabled during PL=1 for testing!
*/
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX31_UART2
+#define CONFIG_MXC_UART_BASE UART2_BASE
#define CONFIG_MXC_SPI
#define CONFIG_MXC_GPIO
diff --git a/include/configs/tx25.h b/include/configs/tx25.h
index f77c546687..87bd8a6756 100644
--- a/include/configs/tx25.h
+++ b/include/configs/tx25.h
@@ -90,7 +90,7 @@
* Serial Info
*/
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX25_UART1
+#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
diff --git a/include/configs/vision2.h b/include/configs/vision2.h
index f321ad2dbc..35b71f79e6 100644
--- a/include/configs/vision2.h
+++ b/include/configs/vision2.h
@@ -54,7 +54,7 @@
* Hardware drivers
*/
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX51_UART3
+#define CONFIG_MXC_UART_BASE UART3_BASE
#define CONFIG_MXC_GPIO
#define CONFIG_MXC_SPI
#define CONFIG_HW_WATCHDOG
diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h
index 9a7a27ac1d..599d5bb42a 100644
--- a/include/configs/zmx25.h
+++ b/include/configs/zmx25.h
@@ -66,7 +66,7 @@
* Serial
*/
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX25_UART2
+#define CONFIG_MXC_UART_BASE UART2_BASE
#define CONFIG_CONS_INDEX 1 /* use UART2 for console */
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
OpenPOWER on IntegriCloud