diff options
| -rw-r--r-- | board/hisilicon/hikey/hikey.c | 30 | ||||
| -rw-r--r-- | include/configs/hikey.h | 2 |
2 files changed, 30 insertions, 2 deletions
diff --git a/board/hisilicon/hikey/hikey.c b/board/hisilicon/hikey/hikey.c index 752ee6f991..7abc67874a 100644 --- a/board/hisilicon/hikey/hikey.c +++ b/board/hisilicon/hikey/hikey.c @@ -410,8 +410,36 @@ int dram_init(void) void dram_init_banksize(void) { + /* + * Reserve regions below from DT memory node (which gets generated + * by U-Boot from the dram banks in arch_fixup_fdt() before booting + * the kernel. This will then match the kernel hikey dts memory node. + * + * 0x05e0,0000 - 0x05ef,ffff: MCU firmware runtime using + * 0x05f0,1000 - 0x05f0,1fff: Reboot reason + * 0x06df,f000 - 0x06df,ffff: Mailbox message data + * 0x0740,f000 - 0x0740,ffff: MCU firmware section + * 0x21f0,0000 - 0x21ff,ffff: pstore/ramoops buffer + * 0x3e00,0000 - 0x3fff,ffff: OP-TEE + */ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + gd->bd->bi_dram[0].size = 0x05e00000; + + gd->bd->bi_dram[1].start = 0x05f00000; + gd->bd->bi_dram[1].size = 0x00001000; + + gd->bd->bi_dram[2].start = 0x05f02000; + gd->bd->bi_dram[2].size = 0x00efd000; + + gd->bd->bi_dram[3].start = 0x06e00000; + gd->bd->bi_dram[3].size = 0x0060f000; + + gd->bd->bi_dram[4].start = 0x07410000; + gd->bd->bi_dram[4].size = 0x1aaf0000; + + gd->bd->bi_dram[5].start = 0x22000000; + gd->bd->bi_dram[5].size = 0x1c000000; } void reset_cpu(ulong addr) diff --git a/include/configs/hikey.h b/include/configs/hikey.h index 114a6d1512..83d9e107fe 100644 --- a/include/configs/hikey.h +++ b/include/configs/hikey.h @@ -33,7 +33,7 @@ /* CONFIG_SYS_TEXT_BASE needs to align with where ATF loads bl33.bin */ #define CONFIG_SYS_TEXT_BASE 0x35000000 -#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_NR_DRAM_BANKS 6 #define PHYS_SDRAM_1 0x00000000 /* 1008 MB (the last 16Mb are secured for TrustZone by ATF*/ |
