diff options
| -rw-r--r-- | include/configs/socrates.h | 20 |
1 files changed, 15 insertions, 5 deletions
diff --git a/include/configs/socrates.h b/include/configs/socrates.h index c3ecd6f403..23ed87f338 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -206,6 +206,16 @@ #define CONFIG_RTC_RX8025 /* Use Epson rx8025 rtc via i2c */ #define CFG_I2C_RTC_ADDR 0x32 /* at address 0x32 */ +/* I2C temp sensor */ +/* Socrates uses Maxim's DS75, which is compatible with LM75 */ +#define CONFIG_DTT_LM75 1 +#define CONFIG_DTT_SENSORS {4} /* Sensor addresses */ +#define CFG_DTT_MAX_TEMP 125 +#define CFG_DTT_LOW_TEMP -55 +#define CFG_DTT_HYSTERESIS 3 +#define CFG_EEPROM_PAGE_WRITE_ENABLE /* necessary for the LM75 chip */ +#define CFG_EEPROM_PAGE_WRITE_BITS 4 + /* RapidIO MMU */ #define CFG_RIO_MEM_BASE 0xc0000000 /* base address */ #define CFG_RIO_MEM_PHYS CFG_RIO_MEM_BASE @@ -226,7 +236,6 @@ #define CFG_PCI1_IO_SIZE 0x01000000 /* 16M */ #if defined(CONFIG_PCI) - #define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_EEPRO100 @@ -293,7 +302,7 @@ #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP -#undef CONFIG_CMD_DTT +#define CONFIG_CMD_DTT #undef CONFIG_CMD_EEPROM #define CONFIG_CMD_I2C #define CONFIG_CMD_MII @@ -360,9 +369,10 @@ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ #define CONFIG_EXTRA_ENV_SETTINGS \ - "bootfile=/tftpboot/socrates/uImage\0" \ + "bootfile=$hostname/uImage\0" \ "netdev=eth0\0" \ "consdev=ttyS0\0" \ + "hostname=socrates\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=$serverip:$rootpath\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ @@ -379,7 +389,7 @@ "tftp ${fdt_addr_r} ${fdt_file}; " \ "run nfsargs addip addcons;" \ "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "fdt_file=socrates/socrates.dtb\0" \ + "fdt_file=$hostname/socrates.dtb\0" \ "fdt_addr_r=B00000\0" \ "fdt_addr=FC1E0000\0" \ "rootpath=/opt/eldk/ppc_85xx\0" \ @@ -387,7 +397,7 @@ "kernel_addr_r=200000\0" \ "ramdisk_addr=FC200000\0" \ "ramdisk_addr_r=400000\0" \ - "load=tftp 100000 /tftpboot/$hostname/u-boot.bin\0" \ + "load=tftp 100000 $hostname/u-boot.bin\0" \ "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \ "cp.b 100000 fffc0000 40000;" \ "setenv filesize;saveenv\0" \ |
