diff options
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-lsch3/README | 8 | ||||
| -rw-r--r-- | drivers/net/fsl-mc/mc.c | 494 | ||||
| -rw-r--r-- | include/configs/ls2085a_common.h | 6 | ||||
| -rw-r--r-- | include/configs/ls2085a_emu.h | 13 | ||||
| -rw-r--r-- | include/configs/ls2085a_simu.h | 5 |
5 files changed, 395 insertions, 131 deletions
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/README b/arch/arm/cpu/armv8/fsl-lsch3/README index 99fc39a61f..f781620b30 100644 --- a/arch/arm/cpu/armv8/fsl-lsch3/README +++ b/arch/arm/cpu/armv8/fsl-lsch3/README @@ -33,3 +33,11 @@ is shown below considering a 32MB NOR flash device: ------------------------- ----> 0x0000_0000 32-MB NOR flash layout + +Environment Variables +===================== +mcboottimeout: MC boot timeout in milliseconds. If this variable is not defined + the value CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS will be assumed. + +mcmemsize: MC DRAM block size. If this variable is not defined, the value + CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE will be assumed. diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c index 2a2b0af53e..c5c44bcab0 100644 --- a/drivers/net/fsl-mc/mc.c +++ b/drivers/net/fsl-mc/mc.c @@ -3,7 +3,6 @@ * * SPDX-License-Identifier: GPL-2.0+ */ - #include <errno.h> #include <asm/io.h> #include <fsl-mc/fsl_mc.h> @@ -15,14 +14,64 @@ #include <fsl-mc/fsl_dpio.h> #include <fsl-mc/fsl_qbman_portal.h> +#define MC_RAM_BASE_ADDR_ALIGNMENT (512UL * 1024 * 1024) +#define MC_RAM_BASE_ADDR_ALIGNMENT_MASK (~(MC_RAM_BASE_ADDR_ALIGNMENT - 1)) +#define MC_RAM_SIZE_ALIGNMENT (256UL * 1024 * 1024) + +#define MC_MEM_SIZE_ENV_VAR "mcmemsize" +#define MC_BOOT_TIMEOUT_ENV_VAR "mcboottimeout" + DECLARE_GLOBAL_DATA_PTR; static int mc_boot_status; struct fsl_mc_io *dflt_mc_io = NULL; uint16_t dflt_dprc_handle = 0; struct fsl_dpbp_obj *dflt_dpbp = NULL; struct fsl_dpio_obj *dflt_dpio = NULL; -uint16_t dflt_dpio_handle = NULL; +uint16_t dflt_dpio_handle = 0; + +#ifdef DEBUG +void dump_ram_words(const char *title, void *addr) +{ + int i; + uint32_t *words = addr; + + printf("Dumping beginning of %s (%p):\n", title, addr); + for (i = 0; i < 16; i++) + printf("%#x ", words[i]); + + printf("\n"); +} +void dump_mc_ccsr_regs(struct mc_ccsr_registers __iomem *mc_ccsr_regs) +{ + printf("MC CCSR registers:\n" + "reg_gcr1 %#x\n" + "reg_gsr %#x\n" + "reg_sicbalr %#x\n" + "reg_sicbahr %#x\n" + "reg_sicapr %#x\n" + "reg_mcfbalr %#x\n" + "reg_mcfbahr %#x\n" + "reg_mcfapr %#x\n" + "reg_psr %#x\n", + mc_ccsr_regs->reg_gcr1, + mc_ccsr_regs->reg_gsr, + mc_ccsr_regs->reg_sicbalr, + mc_ccsr_regs->reg_sicbahr, + mc_ccsr_regs->reg_sicapr, + mc_ccsr_regs->reg_mcfbalr, + mc_ccsr_regs->reg_mcfbahr, + mc_ccsr_regs->reg_mcfapr, + mc_ccsr_regs->reg_psr); +} +#else + +#define dump_ram_words(title, addr) +#define dump_mc_ccsr_regs(mc_ccsr_regs) + +#endif /* DEBUG */ + +#ifndef CONFIG_SYS_LS_MC_FW_IN_DDR /** * Copying MC firmware or DPL image to DDR */ @@ -31,6 +80,7 @@ static int mc_copy_image(const char *title, { debug("%s copied to address %p\n", title, (void *)mc_ram_addr); memcpy((void *)mc_ram_addr, (void *)image_addr, image_size); + flush_dcache_range(mc_ram_addr, mc_ram_addr + image_size); return 0; } @@ -92,22 +142,254 @@ int parse_mc_firmware_fit_image(const void **raw_image_addr, return 0; } +#endif + +/* + * Calculates the values to be used to specify the address range + * for the MC private DRAM block, in the MCFBALR/MCFBAHR registers. + * It returns the highest 512MB-aligned address within the given + * address range, in '*aligned_base_addr', and the number of 256 MiB + * blocks in it, in 'num_256mb_blocks'. + */ +static int calculate_mc_private_ram_params(u64 mc_private_ram_start_addr, + size_t mc_ram_size, + u64 *aligned_base_addr, + u8 *num_256mb_blocks) +{ + u64 addr; + u16 num_blocks; + + if (mc_ram_size % MC_RAM_SIZE_ALIGNMENT != 0) { + printf("fsl-mc: ERROR: invalid MC private RAM size (%lu)\n", + mc_ram_size); + return -EINVAL; + } + + num_blocks = mc_ram_size / MC_RAM_SIZE_ALIGNMENT; + if (num_blocks < 1 || num_blocks > 0xff) { + printf("fsl-mc: ERROR: invalid MC private RAM size (%lu)\n", + mc_ram_size); + return -EINVAL; + } + + addr = (mc_private_ram_start_addr + mc_ram_size - 1) & + MC_RAM_BASE_ADDR_ALIGNMENT_MASK; + + if (addr < mc_private_ram_start_addr) { + printf("fsl-mc: ERROR: bad start address %#llx\n", + mc_private_ram_start_addr); + return -EFAULT; + } + + *aligned_base_addr = addr; + *num_256mb_blocks = num_blocks; + return 0; +} + +static int load_mc_dpc(u64 mc_ram_addr, size_t mc_ram_size) +{ + u64 mc_dpc_offset; +#ifndef CONFIG_SYS_LS_MC_DPC_IN_DDR + int error; + void *dpc_fdt_hdr; + int dpc_size; +#endif + +#ifdef CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET + BUILD_BUG_ON((CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET & 0x3) != 0 || + CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET > 0xffffffff); + + mc_dpc_offset = CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET; +#else +#error "CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET not defined" +#endif + + /* + * Load the MC DPC blob in the MC private DRAM block: + */ +#ifdef CONFIG_SYS_LS_MC_DPC_IN_DDR + printf("MC DPC is preloaded to %#llx\n", mc_ram_addr + mc_dpc_offset); +#else + /* + * Get address and size of the DPC blob stored in flash: + */ +#ifdef CONFIG_SYS_LS_MC_DPC_IN_NOR + dpc_fdt_hdr = (void *)CONFIG_SYS_LS_MC_DPC_ADDR; +#else +#error "No CONFIG_SYS_LS_MC_DPC_IN_xxx defined" +#endif + + error = fdt_check_header(dpc_fdt_hdr); + if (error != 0) { + /* + * Don't return with error here, since the MC firmware can + * still boot without a DPC + */ + printf("fsl-mc: WARNING: No DPC image found\n"); + return 0; + } + + dpc_size = fdt_totalsize(dpc_fdt_hdr); + if (dpc_size > CONFIG_SYS_LS_MC_DPC_MAX_LENGTH) { + printf("fsl-mc: ERROR: Bad DPC image (too large: %d)\n", + dpc_size); + return -EINVAL; + } + + mc_copy_image("MC DPC blob", + (u64)dpc_fdt_hdr, dpc_size, mc_ram_addr + mc_dpc_offset); +#endif /* not defined CONFIG_SYS_LS_MC_DPC_IN_DDR */ + + dump_ram_words("DPC", (void *)(mc_ram_addr + mc_dpc_offset)); + return 0; +} + +static int load_mc_dpl(u64 mc_ram_addr, size_t mc_ram_size) +{ + u64 mc_dpl_offset; +#ifndef CONFIG_SYS_LS_MC_DPL_IN_DDR + int error; + void *dpl_fdt_hdr; + int dpl_size; +#endif + +#ifdef CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET + BUILD_BUG_ON((CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET & 0x3) != 0 || + CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET > 0xffffffff); + + mc_dpl_offset = CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET; +#else +#error "CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET not defined" +#endif + + /* + * Load the MC DPL blob in the MC private DRAM block: + */ +#ifdef CONFIG_SYS_LS_MC_DPL_IN_DDR + printf("MC DPL is preloaded to %#llx\n", mc_ram_addr + mc_dpl_offset); +#else + /* + * Get address and size of the DPL blob stored in flash: + */ +#ifdef CONFIG_SYS_LS_MC_DPL_IN_NOR + dpl_fdt_hdr = (void *)CONFIG_SYS_LS_MC_DPL_ADDR; +#else +#error "No CONFIG_SYS_LS_MC_DPL_IN_xxx defined" +#endif + + error = fdt_check_header(dpl_fdt_hdr); + if (error != 0) { + printf("fsl-mc: ERROR: Bad DPL image (bad header)\n"); + return error; + } + + dpl_size = fdt_totalsize(dpl_fdt_hdr); + if (dpl_size > CONFIG_SYS_LS_MC_DPL_MAX_LENGTH) { + printf("fsl-mc: ERROR: Bad DPL image (too large: %d)\n", + dpl_size); + return -EINVAL; + } + + mc_copy_image("MC DPL blob", + (u64)dpl_fdt_hdr, dpl_size, mc_ram_addr + mc_dpl_offset); +#endif /* not defined CONFIG_SYS_LS_MC_DPL_IN_DDR */ + + dump_ram_words("DPL", (void *)(mc_ram_addr + mc_dpl_offset)); + return 0; +} + +/** + * Return the MC boot timeout value in milliseconds + */ +static unsigned long get_mc_boot_timeout_ms(void) +{ + unsigned long timeout_ms = CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS; + + char *timeout_ms_env_var = getenv(MC_BOOT_TIMEOUT_ENV_VAR); + + if (timeout_ms_env_var) { + timeout_ms = simple_strtoul(timeout_ms_env_var, NULL, 10); + if (timeout_ms == 0) { + printf("fsl-mc: WARNING: Invalid value for \'" + MC_BOOT_TIMEOUT_ENV_VAR + "\' environment variable: %lu\n", + timeout_ms); + + timeout_ms = CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS; + } + } + + return timeout_ms; +} + +static int wait_for_mc(bool booting_mc, u32 *final_reg_gsr) +{ + u32 reg_gsr; + u32 mc_fw_boot_status; + unsigned long timeout_ms = get_mc_boot_timeout_ms(); + struct mc_ccsr_registers __iomem *mc_ccsr_regs = MC_CCSR_BASE_ADDR; + + dmb(); + debug("Polling mc_ccsr_regs->reg_gsr ...\n"); + assert(timeout_ms > 0); + for (;;) { + udelay(1000); /* throttle polling */ + reg_gsr = in_le32(&mc_ccsr_regs->reg_gsr); + mc_fw_boot_status = (reg_gsr & GSR_FS_MASK); + if (mc_fw_boot_status & 0x1) + break; + + timeout_ms--; + if (timeout_ms == 0) + break; + } + + if (timeout_ms == 0) { + if (booting_mc) + printf("fsl-mc: timeout booting management complex firmware\n"); + else + printf("fsl-mc: timeout deploying data path layout\n"); + + /* TODO: Get an error status from an MC CCSR register */ + return -ETIMEDOUT; + } + + if (mc_fw_boot_status != 0x1) { + /* + * TODO: Identify critical errors from the GSR register's FS + * field and for those errors, set error to -ENODEV or other + * appropriate errno, so that the status property is set to + * failure in the fsl,dprc device tree node. + */ + if (booting_mc) { + printf("fsl-mc: WARNING: Firmware booted with error (GSR: %#x)\n", + reg_gsr); + } else { + printf("fsl-mc: WARNING: Data path layout deployed with error (GSR: %#x)\n", + reg_gsr); + } + } + + *final_reg_gsr = reg_gsr; + return 0; +} int mc_init(void) { int error = 0; - int timeout = 200000; int portal_id = 0; struct mc_ccsr_registers __iomem *mc_ccsr_regs = MC_CCSR_BASE_ADDR; u64 mc_ram_addr; - u64 mc_dpl_offset; u32 reg_gsr; - u32 mc_fw_boot_status; - void *dpl_fdt_hdr; - int dpl_size; + u32 reg_mcfbalr; +#ifndef CONFIG_SYS_LS_MC_FW_IN_DDR const void *raw_image_addr; size_t raw_image_size = 0; +#endif struct mc_version mc_ver_info; + u64 mc_ram_aligned_base_addr; + u8 mc_ram_num_256mb_blocks; + size_t mc_ram_size = mc_get_dram_block_size(); /* * The MC private DRAM block was already carved at the end of DRAM @@ -122,8 +404,19 @@ int mc_init(void) } #ifdef CONFIG_FSL_DEBUG_SERVER + /* + * FIXME: I don't think this is right. See get_dram_size_to_hide() + */ mc_ram_addr -= debug_server_get_dram_block_size(); #endif + + error = calculate_mc_private_ram_params(mc_ram_addr, + mc_ram_size, + &mc_ram_aligned_base_addr, + &mc_ram_num_256mb_blocks); + if (error != 0) + goto out; + /* * Management Complex cores should be held at reset out of POR. * U-boot should be the first software to touch MC. To be safe, @@ -139,6 +432,9 @@ int mc_init(void) out_le32(&mc_ccsr_regs->reg_gcr1, 0); dmb(); +#ifdef CONFIG_SYS_LS_MC_FW_IN_DDR + printf("MC firmware is preloaded to %#llx\n", mc_ram_addr); +#else error = parse_mc_firmware_fit_image(&raw_image_addr, &raw_image_size); if (error != 0) goto out; @@ -147,83 +443,34 @@ int mc_init(void) */ mc_copy_image("MC Firmware", (u64)raw_image_addr, raw_image_size, mc_ram_addr); - - /* - * Get address and size of the DPL blob stored in flash: - */ -#ifdef CONFIG_SYS_LS_MC_DPL_IN_NOR - dpl_fdt_hdr = (void *)CONFIG_SYS_LS_MC_DPL_ADDR; -#else -#error "No CONFIG_SYS_LS_MC_DPL_IN_xxx defined" #endif + dump_ram_words("firmware", (void *)mc_ram_addr); - error = fdt_check_header(dpl_fdt_hdr); - if (error != 0) { - printf("fsl-mc: ERROR: Bad DPL image (bad header)\n"); - goto out; - } - - dpl_size = fdt_totalsize(dpl_fdt_hdr); - if (dpl_size > CONFIG_SYS_LS_MC_DPL_MAX_LENGTH) { - printf("fsl-mc: ERROR: Bad DPL image (too large: %d)\n", - dpl_size); - error = -EINVAL; + error = load_mc_dpc(mc_ram_addr, mc_ram_size); + if (error != 0) goto out; - } - /* - * Calculate offset in the MC private DRAM block at which the MC DPL - * blob is to be placed: - */ -#ifdef CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET - BUILD_BUG_ON((CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET & 0x3) != 0 || - CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET > 0xffffffff); - - mc_dpl_offset = CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET; -#else - mc_dpl_offset = mc_get_dram_block_size() - - roundup(CONFIG_SYS_LS_MC_DPL_MAX_LENGTH, 4096); - - if ((mc_dpl_offset & 0x3) != 0 || mc_dpl_offset > 0xffffffff) { - printf("%s: Invalid MC DPL offset: %llu\n", - __func__, mc_dpl_offset); - error = -EINVAL; + error = load_mc_dpl(mc_ram_addr, mc_ram_size); + if (error != 0) goto out; - } -#endif - - /* - * Load the MC DPL blob at the far end of the MC private DRAM block: - * - * TODO: Should we place the DPL at a different location to match - * assumptions of MC firmware about its memory layout? - */ - mc_copy_image("MC DPL blob", - (u64)dpl_fdt_hdr, dpl_size, mc_ram_addr + mc_dpl_offset); debug("mc_ccsr_regs %p\n", mc_ccsr_regs); + dump_mc_ccsr_regs(mc_ccsr_regs); /* - * Tell MC where the MC Firmware image was loaded in DDR: + * Tell MC what is the address range of the DRAM block assigned to it: */ - out_le32(&mc_ccsr_regs->reg_mcfbalr, (u32)mc_ram_addr); - out_le32(&mc_ccsr_regs->reg_mcfbahr, (u32)((u64)mc_ram_addr >> 32)); + reg_mcfbalr = (u32)mc_ram_aligned_base_addr | + (mc_ram_num_256mb_blocks - 1); + out_le32(&mc_ccsr_regs->reg_mcfbalr, reg_mcfbalr); + out_le32(&mc_ccsr_regs->reg_mcfbahr, + (u32)(mc_ram_aligned_base_addr >> 32)); out_le32(&mc_ccsr_regs->reg_mcfapr, MCFAPR_BYPASS_ICID_MASK); /* - * Tell MC where the DPL blob was loaded in DDR, by indicating - * its offset relative to the beginning of the DDR block - * allocated to the MC firmware. The MC firmware is responsible - * for checking that there is no overlap between the DPL blob - * and the runtime heap and stack of the MC firmware itself. - * - * NOTE: bits [31:2] of this offset need to be stored in bits [29:0] of - * the GSR MC CCSR register. So, this offset is assumed to be 4-byte - * aligned. - * Care must be taken not to write 1s into bits 31 and 30 of the GSR in - * this case as the SoC COP or PIC will be signaled. + * Tell the MC that we want delayed DPL deployment. */ - out_le32(&mc_ccsr_regs->reg_gsr, (u32)(mc_dpl_offset >> 2)); + out_le32(&mc_ccsr_regs->reg_gsr, 0xDD00); printf("\nfsl-mc: Booting Management Complex ...\n"); @@ -231,38 +478,9 @@ int mc_init(void) * Deassert reset and release MC core 0 to run */ out_le32(&mc_ccsr_regs->reg_gcr1, GCR1_P1_DE_RST | GCR1_M_ALL_DE_RST); - dmb(); - debug("Polling mc_ccsr_regs->reg_gsr ...\n"); - - for (;;) { - reg_gsr = in_le32(&mc_ccsr_regs->reg_gsr); - mc_fw_boot_status = (reg_gsr & GSR_FS_MASK); - if (mc_fw_boot_status & 0x1) - break; - - udelay(1000); /* throttle polling */ - if (timeout-- <= 0) - break; - } - - if (timeout <= 0) { - printf("fsl-mc: timeout booting management complex firmware\n"); - - /* TODO: Get an error status from an MC CCSR register */ - error = -ETIMEDOUT; + error = wait_for_mc(true, ®_gsr); + if (error != 0) goto out; - } - - if (mc_fw_boot_status != 0x1) { - /* - * TODO: Identify critical errors from the GSR register's FS - * field and for those errors, set error to -ENODEV or other - * appropriate errno, so that the status property is set to - * failure in the fsl,dprc device tree node. - */ - printf("fsl-mc: WARNING: Firmware booted with error (GSR: %#x)\n", - reg_gsr); - } /* * TODO: need to obtain the portal_id for the root container from the @@ -301,7 +519,16 @@ int mc_init(void) printf("fsl-mc: Management Complex booted (version: %d.%d.%d, boot status: %#x)\n", mc_ver_info.major, mc_ver_info.minor, mc_ver_info.revision, - mc_fw_boot_status); + reg_gsr & GSR_FS_MASK); + + /* + * Tell the MC to deploy the DPL: + */ + out_le32(&mc_ccsr_regs->reg_gsr, 0x0); + printf("\nfsl-mc: Deploying data path layout ...\n"); + error = wait_for_mc(false, ®_gsr); + if (error != 0) + goto out; out: if (error != 0) mc_boot_status = -error; @@ -318,14 +545,28 @@ int get_mc_boot_status(void) /** * Return the actual size of the MC private DRAM block. - * - * NOTE: For now this function always returns the minimum required size, - * However, in the future, the actual size may be obtained from an environment - * variable. */ unsigned long mc_get_dram_block_size(void) { - return CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE; + unsigned long dram_block_size = CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE; + + char *dram_block_size_env_var = getenv(MC_MEM_SIZE_ENV_VAR); + + if (dram_block_size_env_var) { + dram_block_size = simple_strtoul(dram_block_size_env_var, NULL, + 10); + + if (dram_block_size < CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE) { + printf("fsl-mc: WARNING: Invalid value for \'" + MC_MEM_SIZE_ENV_VAR + "\' environment variable: %lu\n", + dram_block_size); + + dram_block_size = CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE; + } + } + + return dram_block_size; } int dpio_init(struct dprc_obj_desc obj_desc) @@ -464,6 +705,8 @@ int fsl_mc_ldpaa_init(bd_t *bis) int num_child_objects = 0; error = mc_init(); + if (error < 0) + goto error; error = dprc_get_container_id(dflt_mc_io, &container_id); if (error < 0) { @@ -517,24 +760,27 @@ void fsl_mc_ldpaa_exit(bd_t *bis) { int err; + if (get_mc_boot_status() == 0) { + err = dpio_disable(dflt_mc_io, dflt_dpio_handle); + if (err < 0) { + printf("dpio_disable() failed: %d\n", err); + return; + } + err = dpio_reset(dflt_mc_io, dflt_dpio_handle); + if (err < 0) { + printf("dpio_reset() failed: %d\n", err); + return; + } + err = dpio_close(dflt_mc_io, dflt_dpio_handle); + if (err < 0) { + printf("dpio_close() failed: %d\n", err); + return; + } - err = dpio_disable(dflt_mc_io, dflt_dpio_handle); - if (err < 0) { - printf("dpio_disable() failed: %d\n", err); - return; - } - err = dpio_reset(dflt_mc_io, dflt_dpio_handle); - if (err < 0) { - printf("dpio_reset() failed: %d\n", err); - return; - } - err = dpio_close(dflt_mc_io, dflt_dpio_handle); - if (err < 0) { - printf("dpio_close() failed: %d\n", err); - return; + free(dflt_dpio); + free(dflt_dpbp); } - free(dflt_dpio); - free(dflt_dpbp); - free(dflt_mc_io); + if (dflt_mc_io) + free(dflt_mc_io); } diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h index 5ce5e1c9cb..4b68106ce4 100644 --- a/include/configs/ls2085a_common.h +++ b/include/configs/ls2085a_common.h @@ -138,8 +138,10 @@ #define CONFIG_FSL_MC_ENET #define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (512UL * 1024 * 1024) /* TODO Actual DPL max length needs to be confirmed with the MC FW team */ -#define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH (256 * 1024) -#define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0xe00000 +#define CONFIG_SYS_LS_MC_DPC_MAX_LENGTH 0x20000 +#define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET 0x00F00000 +#define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH 0x20000 +#define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0x00F20000 /* Carve out a DDR region which will not be used by u-boot/Linux */ #if defined(CONFIG_FSL_MC_ENET) || defined(CONFIG_FSL_DEBUG_SERVER) diff --git a/include/configs/ls2085a_emu.h b/include/configs/ls2085a_emu.h index 961dc63c8f..2d68e1bf7e 100644 --- a/include/configs/ls2085a_emu.h +++ b/include/configs/ls2085a_emu.h @@ -72,12 +72,15 @@ #define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR #define CONFIG_SYS_DEBUG_SERVER_FW_ADDR 0x580C00000ULL -/* MC firmware */ -#define CONFIG_SYS_LS_MC_FW_IN_NOR -#define CONFIG_SYS_LS_MC_FW_ADDR 0x580200000ULL +/* + * This trick allows users to load MC images into DDR directly without + * copying from NOR flash. It dramatically improves speed. + */ +#define CONFIG_SYS_LS_MC_FW_IN_DDR +#define CONFIG_SYS_LS_MC_DPL_IN_DDR +#define CONFIG_SYS_LS_MC_DPC_IN_DDR -#define CONFIG_SYS_LS_MC_DPL_IN_NOR -#define CONFIG_SYS_LS_MC_DPL_ADDR 0x5806C0000ULL +#define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 200000 /* Store environment at top of flash */ #define CONFIG_ENV_IS_NOWHERE 1 diff --git a/include/configs/ls2085a_simu.h b/include/configs/ls2085a_simu.h index e669d8d33e..d0d2eedb6d 100644 --- a/include/configs/ls2085a_simu.h +++ b/include/configs/ls2085a_simu.h @@ -138,6 +138,11 @@ #define CONFIG_SYS_LS_MC_DPL_IN_NOR #define CONFIG_SYS_LS_MC_DPL_ADDR 0x5806C0000ULL +#define CONFIG_SYS_LS_MC_DPC_IN_NOR +#define CONFIG_SYS_LS_MC_DPC_ADDR 0x5806F8000ULL + +#define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 200000 + /* Store environment at top of flash */ #define CONFIG_ENV_IS_NOWHERE 1 #define CONFIG_ENV_SIZE 0x1000 |
