diff options
| -rw-r--r-- | CHANGELOG | 273 | ||||
| -rw-r--r-- | board/bf518f-ezbrd/bf518f-ezbrd.c | 2 |
2 files changed, 273 insertions, 2 deletions
@@ -1,9 +1,280 @@ -commit d45bb538e8898ff0f2dcfed6b95e97c7b9afed9d +commit af75a45d23b72a59ac5cc0427696c7f634fdc94b +Author: Wolfgang Denk <wd@denx.de> +Date: Fri May 15 09:27:58 2009 +0200 + + IDE: bail out of dev_print() for unknown device types + + Commit 574b319512 introduced a subtle bug by mixing a list of tests + for "dev_desc->type" and "dev_desc->if_type" into one switch(), which + then mostly did not work because "dev_desc->type" cannot take any + "IF_*" type values. A later fix in commit 8ec6e332ea changed the + switch() into testing "dev_desc->if_type", but at this point the + initial test for unknown device types was completely lost, which + resulted in output like that for IDE ports without device attached: + + Device 1: Model: Firm: Ser#: + Type: # 1F # + Capacity: not available + + This patch re-introduces the missing test for unknown device types. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + Cc: Stefan Roese <sr@denx.de> + Cc: Detlev Zundel <dzu@denx.de> + Tested-by: Stefan Roese <sr@denx.de> + +commit c21f62d8483fbab44cd98d93ff2e9355a330d225 +Author: Stefan Roese <sr@denx.de> +Date: Thu May 14 07:25:13 2009 +0200 + + 74xx_7xx: Fix rounding problem in CPU frequency calculation + + This patch fixes a problem in the CPU frequency calculation. Without it + a 798MHz CPU is displayed as 368.503 MHz. And with it it's 798 MHz. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 3ad8a0517b724782ab36f2b554a94de4c00c1adb +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Wed May 13 22:24:12 2009 +0200 + + console.h: remove unused prototype 'console_realloc' + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 84bf7ca522e94ec402a1264b01971b924b7e268f +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Wed May 13 22:16:31 2009 +0200 + + api: remove un-needed ifdef CONFIG_API already handle by the Makefile + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 792a09eb9d5d8c4f74b7e9f2e887316d511a4e80 +Author: Detlev Zundel <dzu@denx.de> +Date: Wed May 13 10:54:10 2009 +0200 + + Fix e-mail address of Gary Jennejohn. + + Signed-off-by: Detlev Zundel <dzu@denx.de> + +commit 5e2c08c3ac90808e9be64856916bfd6df984823c +Author: Emil Medve <Emilian.Medve@Freescale.com> +Date: Tue May 12 13:48:32 2009 -0500 + + Remove inline qualifier from show_boot_progress() + + The 'inline' is conflicting with the semantic of 'weak' attribute and with the + way the show_boot_progress() function is used. + + Also gcc 4.4 is complaining about it: + + main.c:51: error: inline function 'show_boot_progress' cannot be declared weak + + Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> + +commit fe6da4837308aa33d537ac3e7f36c2d66e3d9a36 +Author: Wolfgang Denk <wd@denx.de> +Date: Tue May 12 15:17:35 2009 +0200 + + MPC8260: fixup device tree by property instead of path + + cpu/mpc8260/cpu.c used to use do_fixup_by_path_u32() to update the + clock frequencies in the device tree, using a CPU path + "/cpus/OF_CPU", with OF_CPU beind defined in the board config file. + + However, this does not work when one board config file (here: + MPC8260ADS.h) is intended to be used for several diffrent CPUs and + therefor contains a generic definition like "cpu@0", as the device + trees that will then be loaded will contain specific names like + "PowerPC,8272@0". + + We switch to using do_fixup_by_prop_u32() instead, so we can search + for device_type="cpu", as it is done in other architectures, too. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + Cc: Heiko Schocher <hs@denx.de> + Acked-by: Heiko Schocher <hs@denx.de> + Tested-by: Heiko Schocher <hs@denx.de> + +commit 12a6753155716e5c3c181a8f40e8b2d3d669aefd +Author: Rohit Hagargundgi <h.rohit@samsung.com> +Date: Mon Mar 9 19:45:46 2009 +0530 + + Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN + + Add CONFIG_SYS_MONITOR_LEN macro to apollon board config. + CONFIG_SYS_MONITOR_LEN defines the U-Boot image size. + and is used by OneNAND ipl when reading U-Boot image. + + Signed-off-by: Rohit Hagargundgi <h.rohit at samsung.com> + Acked-by: Kyungmin Park <kyungmin.park@samsung.com> + +commit c404cc5884b0c82fd82d751dbd8e8b3f8919a23a +Author: Ben Warren <biggerbadderben@gmail.com> +Date: Tue Apr 28 17:04:51 2009 -0700 + + Schedule removal of non-CONFIG_NET_MULTI net driver API + + This will make CONFIG_NET_MULTI the only net driver configuration and + we'll be able to remove this option. + + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 60bbcf0cc6e55095dd186e59a557d584b9b56eb1 +Author: Detlev Zundel <dzu@denx.de> +Date: Tue May 5 16:04:06 2009 +0200 + + powerpc/inka4x0: Remove left-over ide reset code. + + The pin which was used in preliminary versions of the board for ide + reset is really connected to the rtc clock. + + Signed-off-by: Detlev Zundel <dzu@denx.de> + +commit f578a2da6770951239ad91ee9a1875fdc71dbe48 +Author: Marco Stornelli <marco.stornelli@gmail.com> +Date: Tue Apr 28 19:04:02 2009 +0200 + + Add imls utility command + + This patch adds, under tools folder, a new command called imls. Its + goal is the same of UBoot's imls but it can be used as Linux shell + command. It reads from raw mtd partition and prints the list of the + stored images. + + Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com> + +commit da95427ce431908714ae5e9f663ee6e2bc3bcc33 +Author: Heiko Schocher <hs@denx.de> +Date: Tue Apr 28 08:36:11 2009 +0200 + + netloop: updates for NetLoop + + Fix some issues introduced from commit: + 2f70c49e5b9813635ad73666aa30f304c7fdeda9 + suggested by Mike Frysinger. + + - added some comment for the env_id variable in common_cmd_nvedit.c + - moved some variables in fn scope instead of file scope + - NetInitLoop now static void + + Signed-off-by: Heiko Schocher <hs@denx.de> + Acked-by: Ben Warren <biggerbadderben@gmail.com> + +commit 3c1d89545de11822f8b5afb5646a57757620bd95 +Author: Heiko Schocher <hs@denx.de> +Date: Tue Apr 28 07:48:39 2009 +0200 + + 82xx, ids8247: added ids8247 board to MAKEALL script + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 890a017a8a995c921d1e889d360e8d6538ceecfe +Author: Detlev Zundel <dzu@denx.de> +Date: Thu May 7 13:08:55 2009 +0200 + + arm/imx31_phycore: Fix bi_arch_number + + Signed-off-by: Detlev Zundel <dzu@denx.de> + Cc: Sascha Hauer <s.hauer@pengutronix.de> + +commit ee47bfabefeb25bdfc83f49ef3bae0f325d3e69e +Author: Sascha Hauer <s.hauer@pengutronix.de> +Date: Fri May 15 10:21:33 2009 +0200 + + remove myself as phycore/litekit Maintainer + + I never acked a patch that adds me as phycore i.MX31 maintainer nor was + it me who pushed the patches, so remove myself from the maintainer list + so that other people do not longer wait for my ack. + + Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> + +commit c63254ef5628efe1c77cb2fdba20753f9666f55d +Author: Sergey Lapin <slapin@ossfans.org> +Date: Tue May 12 12:25:14 2009 +0400 + + AFEB9260 network fix + + AFEB9260 uses PA10, PA11 for ETX2 and ETX3. + Also, due to extarnal pull-up on IRQ line, Micrel PHY ID is 1 after reset sequence, + not 0. + + Signed-off-by: Sergey Lapin <slapin@ossfans.org> + +commit f8ddcd58221cab63dd25c2324dd2032487f748b1 +Author: Graf Yang <graf.yang@analog.com> +Date: Tue May 5 02:26:27 2009 -0400 + + Blackfin: bf518f-ezbrd: reset ethernet PHY during init + + We don't know what state the ethernet PHY is in when starting up, so make + sure we set it to a sane state. This fixes troubles seen when Linux boots + up, configures the PHY is a non-default state, and then the system reboots + into U-Boot which previously expected a reset state only. + + Signed-off-by: Graf Yang <graf.yang@analog.com> + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 53310b88eaa27fb5cb83144d0b22389190ad87a1 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Tue May 5 01:35:41 2009 -0400 + + Blackfin: bf527-ezkit: fix SPI flash env params + + The BF527-EZKIT settings for storing the environment in SPI flash wasn't + using the correct sector settings for the SPI flash part that is actually + on the board. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit f58bf804a14324c6c9186a7a664fa23281780e8b +Author: Mike Frysinger <vapier@gentoo.org> +Date: Fri Apr 24 23:54:19 2009 -0400 + + Blackfin: avoid get_sclk() with early serial debug + + When the clock functions were changed to use cached values (and thereby + avoiding expensive math functions), early serial debug broke because the + baud programming is called before external memory is available. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 02778f2f1b4b1a28b492367477db27c58d45ae35 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Fri Apr 24 23:39:41 2009 -0400 + + Blackfin: fix booting with older bootroms (no EVT1) + + When dropping jump block support, the assumption was that all bootroms + supported entry point redirection via the EVT1 register. Unfortunately, + this turned out to be incorrect for the oldest Blackfin parts (BF533-0.2 + and older and BF561). No one really noticed earlier because these parts + usually are booted by bypassing the bootrom entirely, and older BF533 + parts are not supported at all (too many anomalies). + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit af2c37378f203857d5e6c957e77a14c2da5b59d2 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Fri Apr 24 23:22:48 2009 -0400 + + Blackfin: recurse with early serial initcode + + Make sure we recurse through serial_putc() rather than bang on the UART + transmit register directly to avoid hardware overflows when using \n. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 6b8edfde22acc574b5532e9f086e6a7287a9bc78 Author: Wolfgang Denk <wd@denx.de> Date: Fri May 1 21:59:12 2009 +0200 Prepare v2009.06-rc1 + Update CHANGELOG. + Signed-off-by: Wolfgang Denk <wd@denx.de> commit 6b2beb5626a143ca5347e7d2c6005be9936c1fbb diff --git a/board/bf518f-ezbrd/bf518f-ezbrd.c b/board/bf518f-ezbrd/bf518f-ezbrd.c index 1761b8e1d2..ec5a7ed0b1 100644 --- a/board/bf518f-ezbrd/bf518f-ezbrd.c +++ b/board/bf518f-ezbrd/bf518f-ezbrd.c @@ -72,7 +72,7 @@ static void board_init_enetaddr(uchar *mac_addr) #define KSZ_REG_P3C0 0x30 /* Register 48: Port 3 Control 0 */ static int ksz8893m_transfer(struct spi_slave *slave, uchar dir, uchar reg, - uchar data, uchar result[3]) + uchar data, uchar result[3]) { unsigned char dout[3] = { dir, reg, data, }; return spi_xfer(slave, sizeof(dout) * 8, dout, result, SPI_XFER_BEGIN | SPI_XFER_END); |
