diff options
| -rw-r--r-- | drivers/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/Makefile | 1 | ||||
| -rw-r--r-- | drivers/core/device.c | 4 | ||||
| -rw-r--r-- | drivers/pinctrl/Kconfig | 101 | ||||
| -rw-r--r-- | drivers/pinctrl/Makefile | 2 | ||||
| -rw-r--r-- | drivers/pinctrl/pinctrl-generic.c | 359 | ||||
| -rw-r--r-- | drivers/pinctrl/pinctrl-uclass.c | 240 | ||||
| -rw-r--r-- | include/dm/pinctrl.h | 227 | ||||
| -rw-r--r-- | include/dm/uclass-id.h | 2 |
9 files changed, 938 insertions, 0 deletions
diff --git a/drivers/Kconfig b/drivers/Kconfig index 524d73e64c..63c92c594a 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -40,6 +40,8 @@ source "drivers/pci/Kconfig" source "drivers/pcmcia/Kconfig" +source "drivers/pinctrl/Kconfig" + source "drivers/power/Kconfig" source "drivers/ram/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index a721ec86df..9d0a5959a8 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -1,6 +1,7 @@ obj-$(CONFIG_$(SPL_)DM) += core/ obj-$(CONFIG_$(SPL_)CLK) += clk/ obj-$(CONFIG_$(SPL_)LED) += led/ +obj-$(CONFIG_$(SPL_)PINCTRL) += pinctrl/ obj-$(CONFIG_$(SPL_)RAM) += ram/ ifdef CONFIG_SPL_BUILD diff --git a/drivers/core/device.c b/drivers/core/device.c index afa4b4fda9..a6cd93698f 100644 --- a/drivers/core/device.c +++ b/drivers/core/device.c @@ -15,6 +15,7 @@ #include <dm/device.h> #include <dm/device-internal.h> #include <dm/lists.h> +#include <dm/pinctrl.h> #include <dm/platdata.h> #include <dm/uclass.h> #include <dm/uclass-internal.h> @@ -286,6 +287,9 @@ int device_probe_child(struct udevice *dev, void *parent_priv) dev->flags |= DM_FLAG_ACTIVATED; + /* continue regardless of the result of pinctrl */ + pinctrl_select_state(dev, "default"); + ret = uclass_pre_probe_device(dev); if (ret) goto fail; diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig new file mode 100644 index 0000000000..6ac56ebe7d --- /dev/null +++ b/drivers/pinctrl/Kconfig @@ -0,0 +1,101 @@ +# +# PINCTRL infrastructure and drivers +# + +menu "Pin controllers" + +config PINCTRL + bool "Support pin controllers" + depends on DM + help + This enables the basic support for pinctrl framework. You may want + to enable some more options depending on what you want to do. + +config PINCTRL_FULL + bool "Support full pin controllers" + depends on PINCTRL && OF_CONTROL + default y + help + This provides Linux-compatible device tree interface for the pinctrl + subsystem. This feature depends on device tree configuration because + it parses a device tree to look for the pinctrl device which the + peripheral device is associated with. + + If this option is disabled (it is the only possible choice for non-DT + boards), the pinctrl core provides no systematic mechanism for + identifying peripheral devices, applying needed pinctrl settings. + It is totally up to the implementation of each low-level driver. + You can save memory footprint in return for some limitations. + +config PINCTRL_GENERIC + bool "Support generic pin controllers" + depends on PINCTRL_FULL + default y + help + Say Y here if you want to use the pinctrl subsystem through the + generic DT interface. If enabled, some functions become available + to parse common properties such as "pins", "groups", "functions" and + some pin configuration parameters. It would be easier if you only + need the generic DT interface for pin muxing and pin configuration. + If you need to handle vendor-specific DT properties, you can disable + this option and implement your own set_state callback in the pinctrl + operations. + +config PINMUX + bool "Support pin multiplexing controllers" + depends on PINCTRL_GENERIC + default y + help + This option enables pin multiplexing through the generic pinctrl + framework. + +config PINCONF + bool "Support pin configuration controllers" + depends on PINCTRL_GENERIC + help + This option enables pin configuration through the generic pinctrl + framework. + +config SPL_PINCTRL + bool "Support pin controlloers in SPL" + depends on SPL && SPL_DM + help + This option is an SPL-variant of the PINCTRL option. + See the help of PINCTRL for details. + +config SPL_PINCTRL_FULL + bool "Support full pin controllers in SPL" + depends on SPL_PINCTRL && SPL_OF_CONTROL + default y + help + This option is an SPL-variant of the PINCTRL_FULL option. + See the help of PINCTRL_FULL for details. + +config SPL_PINCTRL_GENERIC + bool "Support generic pin controllers in SPL" + depends on SPL_PINCTRL_FULL + default y + help + This option is an SPL-variant of the PINCTRL_GENERIC option. + See the help of PINCTRL_GENERIC for details. + +config SPL_PINMUX + bool "Support pin multiplexing controllers in SPL" + depends on SPL_PINCTRL_GENERIC + default y + help + This option is an SPL-variant of the PINMUX option. + See the help of PINMUX for details. + +config SPL_PINCONF + bool "Support pin configuration controllers in SPL" + depends on SPL_PINCTRL_GENERIC + help + This option is an SPL-variant of the PINCONF option. + See the help of PINCONF for details. + +if PINCTRL || SPL_PINCTRL + +endif + +endmenu diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile new file mode 100644 index 0000000000..a713c7db90 --- /dev/null +++ b/drivers/pinctrl/Makefile @@ -0,0 +1,2 @@ +obj-y += pinctrl-uclass.o +obj-$(CONFIG_$(SPL_)PINCTRL_GENERIC) += pinctrl-generic.o diff --git a/drivers/pinctrl/pinctrl-generic.c b/drivers/pinctrl/pinctrl-generic.c new file mode 100644 index 0000000000..e86b72a8de --- /dev/null +++ b/drivers/pinctrl/pinctrl-generic.c @@ -0,0 +1,359 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <linux/compat.h> +#include <dm/device.h> +#include <dm/pinctrl.h> + +DECLARE_GLOBAL_DATA_PTR; + +/** + * pinctrl_pin_name_to_selector() - return the pin selector for a pin + * + * @dev: pin controller device + * @pin: the pin name to look up + * @return: pin selector, or negative error code on failure + */ +static int pinctrl_pin_name_to_selector(struct udevice *dev, const char *pin) +{ + const struct pinctrl_ops *ops = pinctrl_get_ops(dev); + unsigned npins, selector; + + if (!ops->get_pins_count || !ops->get_pin_name) { + dev_dbg(dev, "get_pins_count or get_pin_name missing\n"); + return -ENOSYS; + } + + npins = ops->get_pins_count(dev); + + /* See if this pctldev has this pin */ + for (selector = 0; selector < npins; selector++) { + const char *pname = ops->get_pin_name(dev, selector); + + if (!strcmp(pin, pname)) + return selector; + } + + return -ENOSYS; +} + +/** + * pinctrl_group_name_to_selector() - return the group selector for a group + * + * @dev: pin controller device + * @group: the pin group name to look up + * @return: pin group selector, or negative error code on failure + */ +static int pinctrl_group_name_to_selector(struct udevice *dev, + const char *group) +{ + const struct pinctrl_ops *ops = pinctrl_get_ops(dev); + unsigned ngroups, selector; + + if (!ops->get_groups_count || !ops->get_group_name) { + dev_dbg(dev, "get_groups_count or get_group_name missing\n"); + return -ENOSYS; + } + + ngroups = ops->get_groups_count(dev); + + /* See if this pctldev has this group */ + for (selector = 0; selector < ngroups; selector++) { + const char *gname = ops->get_group_name(dev, selector); + + if (!strcmp(group, gname)) + return selector; + } + + return -ENOSYS; +} + +#if CONFIG_IS_ENABLED(PINMUX) +/** + * pinmux_func_name_to_selector() - return the function selector for a function + * + * @dev: pin controller device + * @function: the function name to look up + * @return: function selector, or negative error code on failure + */ +static int pinmux_func_name_to_selector(struct udevice *dev, + const char *function) +{ + const struct pinctrl_ops *ops = pinctrl_get_ops(dev); + unsigned nfuncs, selector = 0; + + if (!ops->get_functions_count || !ops->get_function_name) { + dev_dbg(dev, + "get_functions_count or get_function_name missing\n"); + return -ENOSYS; + } + + nfuncs = ops->get_functions_count(dev); + + /* See if this pctldev has this function */ + for (selector = 0; selector < nfuncs; selector++) { + const char *fname = ops->get_function_name(dev, selector); + + if (!strcmp(function, fname)) + return selector; + } + + return -ENOSYS; +} + +/** + * pinmux_enable_setting() - enable pin-mux setting for a certain pin/group + * + * @dev: pin controller device + * @is_group: target of operation (true: pin group, false: pin) + * @selector: pin selector or group selector, depending on @is_group + * @func_selector: function selector + * @return: 0 on success, or negative error code on failure + */ +static int pinmux_enable_setting(struct udevice *dev, bool is_group, + unsigned selector, unsigned func_selector) +{ + const struct pinctrl_ops *ops = pinctrl_get_ops(dev); + + if (is_group) { + if (!ops->pinmux_group_set) { + dev_dbg(dev, "pinmux_group_set op missing\n"); + return -ENOSYS; + } + + return ops->pinmux_group_set(dev, selector, func_selector); + } else { + if (!ops->pinmux_set) { + dev_dbg(dev, "pinmux_set op missing\n"); + return -ENOSYS; + } + return ops->pinmux_set(dev, selector, func_selector); + } +} +#else +static int pinmux_func_name_to_selector(struct udevice *dev, + const char *function) +{ + return 0; +} + +static int pinmux_enable_setting(struct udevice *dev, bool is_group, + unsigned selector, unsigned func_selector) +{ + return 0; +} +#endif + +#if CONFIG_IS_ENABLED(PINCONF) +/** + * pinconf_prop_name_to_param() - return parameter ID for a property name + * + * @dev: pin controller device + * @property: property name in DTS, such as "bias-pull-up", "slew-rate", etc. + * @default_value: return default value in case no value is specified in DTS + * @return: return pamater ID, or negative error code on failure + */ +static int pinconf_prop_name_to_param(struct udevice *dev, + const char *property, u32 *default_value) +{ + const struct pinctrl_ops *ops = pinctrl_get_ops(dev); + const struct pinconf_param *p, *end; + + if (!ops->pinconf_num_params || !ops->pinconf_params) { + dev_dbg(dev, "pinconf_num_params or pinconf_params missing\n"); + return -ENOSYS; + } + + p = ops->pinconf_params; + end = p + ops->pinconf_num_params; + + /* See if this pctldev supports this parameter */ + for (; p < end; p++) { + if (!strcmp(property, p->property)) { + *default_value = p->default_value; + return p->param; + } + } + + return -ENOSYS; +} + +/** + * pinconf_enable_setting() - apply pin configuration for a certain pin/group + * + * @dev: pin controller device + * @is_group: target of operation (true: pin group, false: pin) + * @selector: pin selector or group selector, depending on @is_group + * @param: configuration paramter + * @argument: argument taken by some configuration parameters + * @return: 0 on success, or negative error code on failure + */ +static int pinconf_enable_setting(struct udevice *dev, bool is_group, + unsigned selector, unsigned param, + u32 argument) +{ + const struct pinctrl_ops *ops = pinctrl_get_ops(dev); + + if (is_group) { + if (!ops->pinconf_group_set) { + dev_dbg(dev, "pinconf_group_set op missing\n"); + return -ENOSYS; + } + + return ops->pinconf_group_set(dev, selector, param, + argument); + } else { + if (!ops->pinconf_set) { + dev_dbg(dev, "pinconf_set op missing\n"); + return -ENOSYS; + } + return ops->pinconf_set(dev, selector, param, argument); + } +} +#else +static int pinconf_prop_name_to_param(struct udevice *dev, + const char *property, u32 *default_value) +{ + return -ENOSYS; +} + +static int pinconf_enable_setting(struct udevice *dev, bool is_group, + unsigned selector, unsigned param, + u32 argument) +{ + return 0; +} +#endif + +/** + * pinctrl_generic_set_state_one() - set state for a certain pin/group + * Apply all pin multiplexing and pin configurations specified by @config + * for a given pin or pin group. + * + * @dev: pin controller device + * @config: pseudo device pointing to config node + * @is_group: target of operation (true: pin group, false: pin) + * @selector: pin selector or group selector, depending on @is_group + * @return: 0 on success, or negative error code on failure + */ +static int pinctrl_generic_set_state_one(struct udevice *dev, + struct udevice *config, + bool is_group, unsigned selector) +{ + const void *fdt = gd->fdt_blob; + int node_offset = config->of_offset; + const char *propname; + const void *value; + int prop_offset, len, func_selector, param, ret; + u32 arg, default_val; + + for (prop_offset = fdt_first_property_offset(fdt, node_offset); + prop_offset > 0; + prop_offset = fdt_next_property_offset(fdt, prop_offset)) { + value = fdt_getprop_by_offset(fdt, prop_offset, + &propname, &len); + if (!value) + return -EINVAL; + + if (!strcmp(propname, "function")) { + func_selector = pinmux_func_name_to_selector(dev, + value); + if (func_selector < 0) + return func_selector; + ret = pinmux_enable_setting(dev, is_group, + selector, + func_selector); + } else { + param = pinconf_prop_name_to_param(dev, propname, + &default_val); + if (param < 0) + continue; /* just skip unknown properties */ + + if (len >= sizeof(fdt32_t)) + arg = fdt32_to_cpu(*(fdt32_t *)value); + else + arg = default_val; + + ret = pinconf_enable_setting(dev, is_group, + selector, param, arg); + } + + if (ret) + return ret; + } + + return 0; +} + +/** + * pinctrl_generic_set_state_subnode() - apply all settings in config node + * + * @dev: pin controller device + * @config: pseudo device pointing to config node + * @return: 0 on success, or negative error code on failure + */ +static int pinctrl_generic_set_state_subnode(struct udevice *dev, + struct udevice *config) +{ + const void *fdt = gd->fdt_blob; + int node = config->of_offset; + const char *subnode_target_type = "pins"; + bool is_group = false; + const char *name; + int strings_count, selector, i, ret; + + strings_count = fdt_count_strings(fdt, node, subnode_target_type); + if (strings_count < 0) { + subnode_target_type = "groups"; + is_group = true; + strings_count = fdt_count_strings(fdt, node, + subnode_target_type); + if (strings_count < 0) + return -EINVAL; + } + + for (i = 0; i < strings_count; i++) { + ret = fdt_get_string_index(fdt, node, subnode_target_type, + i, &name); + if (ret < 0) + return -EINVAL; + + if (is_group) + selector = pinctrl_group_name_to_selector(dev, name); + else + selector = pinctrl_pin_name_to_selector(dev, name); + if (selector < 0) + return selector; + + ret = pinctrl_generic_set_state_one(dev, config, + is_group, selector); + if (ret) + return ret; + } + + return 0; +} + +int pinctrl_generic_set_state(struct udevice *dev, struct udevice *config) +{ + struct udevice *child; + int ret; + + ret = pinctrl_generic_set_state_subnode(dev, config); + if (ret) + return ret; + + for (device_find_first_child(config, &child); + child; + device_find_next_child(&child)) { + ret = pinctrl_generic_set_state_subnode(dev, child); + if (ret) + return ret; + } + + return 0; +} diff --git a/drivers/pinctrl/pinctrl-uclass.c b/drivers/pinctrl/pinctrl-uclass.c new file mode 100644 index 0000000000..d96c201e83 --- /dev/null +++ b/drivers/pinctrl/pinctrl-uclass.c @@ -0,0 +1,240 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <libfdt.h> +#include <linux/err.h> +#include <linux/list.h> +#include <dm/device.h> +#include <dm/lists.h> +#include <dm/pinctrl.h> +#include <dm/uclass.h> + +DECLARE_GLOBAL_DATA_PTR; + +#if CONFIG_IS_ENABLED(PINCTRL_FULL) +/** + * pinctrl_config_one() - apply pinctrl settings for a single node + * + * @config: pin configuration node + * @return: 0 on success, or negative error code on failure + */ +static int pinctrl_config_one(struct udevice *config) +{ + struct udevice *pctldev; + const struct pinctrl_ops *ops; + + pctldev = config; + for (;;) { + pctldev = dev_get_parent(pctldev); + if (!pctldev) { + dev_err(config, "could not find pctldev\n"); + return -EINVAL; + } + if (pctldev->uclass->uc_drv->id == UCLASS_PINCTRL) + break; + } + + ops = pinctrl_get_ops(pctldev); + return ops->set_state(pctldev, config); +} + +/** + * pinctrl_select_state_full() - full implementation of pinctrl_select_state + * + * @dev: peripheral device + * @statename: state name, like "default" + * @return: 0 on success, or negative error code on failure + */ +static int pinctrl_select_state_full(struct udevice *dev, const char *statename) +{ + const void *fdt = gd->fdt_blob; + int node = dev->of_offset; + char propname[32]; /* long enough */ + const fdt32_t *list; + uint32_t phandle; + int config_node; + struct udevice *config; + int state, size, i, ret; + + state = fdt_find_string(fdt, node, "pinctrl-names", statename); + if (state < 0) { + char *end; + /* + * If statename is not found in "pinctrl-names", + * assume statename is just the integer state ID. + */ + state = simple_strtoul(statename, &end, 10); + if (*end) + return -EINVAL; + } + + snprintf(propname, sizeof(propname), "pinctrl-%d", state); + list = fdt_getprop(fdt, node, propname, &size); + if (!list) + return -EINVAL; + + size /= sizeof(*list); + for (i = 0; i < size; i++) { + phandle = fdt32_to_cpu(*list++); + + config_node = fdt_node_offset_by_phandle(fdt, phandle); + if (config_node < 0) { + dev_err(dev, "prop %s index %d invalid phandle\n", + propname, i); + return -EINVAL; + } + ret = uclass_get_device_by_of_offset(UCLASS_PINCONFIG, + config_node, &config); + if (ret) + return ret; + + ret = pinctrl_config_one(config); + if (ret) + return ret; + } + + return 0; +} + +/** + * pinconfig_post-bind() - post binding for PINCONFIG uclass + * Recursively bind its children as pinconfig devices. + * + * @dev: pinconfig device + * @return: 0 on success, or negative error code on failure + */ +static int pinconfig_post_bind(struct udevice *dev) +{ + const void *fdt = gd->fdt_blob; + int offset = dev->of_offset; + const char *name; + int ret; + + for (offset = fdt_first_subnode(fdt, offset); + offset > 0; + offset = fdt_next_subnode(fdt, offset)) { + /* + * If this node has "compatible" property, this is not + * a pin configuration node, but a normal device. skip. + */ + fdt_get_property(fdt, offset, "compatible", &ret); + if (ret >= 0) + continue; + + if (ret != -FDT_ERR_NOTFOUND) + return ret; + + name = fdt_get_name(fdt, offset, NULL); + if (!name) + return -EINVAL; + ret = device_bind_driver_to_node(dev, "pinconfig", name, + offset, NULL); + if (ret) + return ret; + } + + return 0; +} + +UCLASS_DRIVER(pinconfig) = { + .id = UCLASS_PINCONFIG, + .post_bind = pinconfig_post_bind, + .name = "pinconfig", +}; + +U_BOOT_DRIVER(pinconfig_generic) = { + .name = "pinconfig", + .id = UCLASS_PINCONFIG, +}; + +#else +static int pinctrl_select_state_full(struct udevice *dev, const char *statename) +{ + return -ENODEV; +} + +static int pinconfig_post_bind(struct udevice *dev) +{ + return 0; +} +#endif + +/** + * pinctrl_select_state_simple() - simple implementation of pinctrl_select_state + * + * @dev: peripheral device + * @return: 0 on success, or negative error code on failure + */ +static int pinctrl_select_state_simple(struct udevice *dev) +{ + struct udevice *pctldev; + struct pinctrl_ops *ops; + int ret; + + /* + * For simplicity, assume the first device of PINCTRL uclass + * is the correct one. This is most likely OK as there is + * usually only one pinctrl device on the system. + */ + ret = uclass_get_device(UCLASS_PINCTRL, 0, &pctldev); + if (ret) + return ret; + + ops = pinctrl_get_ops(pctldev); + if (!ops->set_state_simple) { + dev_dbg(dev, "set_state_simple op missing\n"); + return -ENOSYS; + } + + return ops->set_state_simple(pctldev, dev); +} + +int pinctrl_select_state(struct udevice *dev, const char *statename) +{ + /* + * Try full-implemented pinctrl first. + * If it fails or is not implemented, try simple one. + */ + if (pinctrl_select_state_full(dev, statename)) + return pinctrl_select_state_simple(dev); + + return 0; +} + +/** + * pinconfig_post-bind() - post binding for PINCTRL uclass + * Recursively bind child nodes as pinconfig devices in case of full pinctrl. + * + * @dev: pinctrl device + * @return: 0 on success, or negative error code on failure + */ +static int pinctrl_post_bind(struct udevice *dev) +{ + const struct pinctrl_ops *ops = pinctrl_get_ops(dev); + + if (!ops) { + dev_dbg(dev, "ops is not set. Do not bind.\n"); + return -EINVAL; + } + + /* + * If set_state callback is set, we assume this pinctrl driver is the + * full implementation. In this case, its child nodes should be bound + * so that peripheral devices can easily search in parent devices + * during later DT-parsing. + */ + if (ops->set_state) + return pinconfig_post_bind(dev); + + return 0; +} + +UCLASS_DRIVER(pinctrl) = { + .id = UCLASS_PINCTRL, + .post_bind = pinctrl_post_bind, + .name = "pinctrl", +}; diff --git a/include/dm/pinctrl.h b/include/dm/pinctrl.h new file mode 100644 index 0000000000..bc6fdb4a1f --- /dev/null +++ b/include/dm/pinctrl.h @@ -0,0 +1,227 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __PINCTRL_H +#define __PINCTRL_H + +/** + * struct pinconf_param - pin config parameters + * + * @property: property name in DT nodes + * @param: ID for this config parameter + * @default_value: default value for this config parameter used in case + * no value is specified in DT nodes + */ +struct pinconf_param { + const char * const property; + unsigned int param; + u32 default_value; +}; + +/** + * struct pinctrl_ops - pin control operations, to be implemented by + * pin controller drivers. + * + * The @set_state is the only mandatory operation. You can implement your + * pinctrl driver with its own @set_state. In this case, the other callbacks + * are not required. Otherwise, generic pinctrl framework is also available; + * use pinctrl_generic_set_state for @set_state, and implement other operations + * depending on your necessity. + * + * @get_pins_count: return number of selectable named pins available + * in this driver. (necessary to parse "pins" property in DTS) + * @get_pin_name: return the pin name of the pin selector, + * called by the core to figure out which pin it shall do + * operations to. (necessary to parse "pins" property in DTS) + * @get_groups_count: return number of selectable named groups available + * in this driver. (necessary to parse "groups" property in DTS) + * @get_group_name: return the group name of the group selector, + * called by the core to figure out which pin group it shall do + * operations to. (necessary to parse "groups" property in DTS) + * @get_functions_count: return number of selectable named functions available + * in this driver. (necessary for pin-muxing) + * @get_function_name: return the function name of the muxing selector, + * called by the core to figure out which mux setting it shall map a + * certain device to. (necessary for pin-muxing) + * @pinmux_set: enable a certain muxing function with a certain pin. + * The @func_selector selects a certain function whereas @pin_selector + * selects a certain pin to be used. On simple controllers one of them + * may be ignored. (necessary for pin-muxing against a single pin) + * @pinmux_group_set: enable a certain muxing function with a certain pin + * group. The @func_selector selects a certain function whereas + * @group_selector selects a certain set of pins to be used. On simple + * controllers one of them may be ignored. + * (necessary for pin-muxing against a pin group) + * @pinconf_num_params: number of driver-specific parameters to be parsed + * from device trees (necessary for pin-configuration) + * @pinconf_params: list of driver_specific parameters to be parsed from + * device trees (necessary for pin-configuration) + * @pinconf_set: configure an individual pin with a given parameter. + * (necessary for pin-configuration against a single pin) + * @pinconf_group_set: configure all pins in a group with a given parameter. + * (necessary for pin-configuration against a pin group) + * @set_state: do pinctrl operations specified by @config, a pseudo device + * pointing a config node. (necessary for pinctrl_full) + * @set_state_simple: do needed pinctrl operations for a peripherl @periph. + * (necessary for pinctrl_simple) + */ +struct pinctrl_ops { + int (*get_pins_count)(struct udevice *dev); + const char *(*get_pin_name)(struct udevice *dev, unsigned selector); + int (*get_groups_count)(struct udevice *dev); + const char *(*get_group_name)(struct udevice *dev, unsigned selector); + int (*get_functions_count)(struct udevice *dev); + const char *(*get_function_name)(struct udevice *dev, + unsigned selector); + int (*pinmux_set)(struct udevice *dev, unsigned pin_selector, + unsigned func_selector); + int (*pinmux_group_set)(struct udevice *dev, unsigned group_selector, + unsigned func_selector); + unsigned int pinconf_num_params; + const struct pinconf_param *pinconf_params; + int (*pinconf_set)(struct udevice *dev, unsigned pin_selector, + unsigned param, unsigned argument); + int (*pinconf_group_set)(struct udevice *dev, unsigned group_selector, + unsigned param, unsigned argument); + int (*set_state)(struct udevice *dev, struct udevice *config); + int (*set_state_simple)(struct udevice *dev, struct udevice *periph); +}; + +#define pinctrl_get_ops(dev) ((struct pinctrl_ops *)(dev)->driver->ops) + +/** + * Generic pin configuration paramters + * + * @PIN_CONFIG_BIAS_DISABLE: disable any pin bias on the pin, a + * transition from say pull-up to pull-down implies that you disable + * pull-up in the process, this setting disables all biasing. + * @PIN_CONFIG_BIAS_HIGH_IMPEDANCE: the pin will be set to a high impedance + * mode, also know as "third-state" (tristate) or "high-Z" or "floating". + * On output pins this effectively disconnects the pin, which is useful + * if for example some other pin is going to drive the signal connected + * to it for a while. Pins used for input are usually always high + * impedance. + * @PIN_CONFIG_BIAS_BUS_HOLD: the pin will be set to weakly latch so that it + * weakly drives the last value on a tristate bus, also known as a "bus + * holder", "bus keeper" or "repeater". This allows another device on the + * bus to change the value by driving the bus high or low and switching to + * tristate. The argument is ignored. + * @PIN_CONFIG_BIAS_PULL_UP: the pin will be pulled up (usually with high + * impedance to VDD). If the argument is != 0 pull-up is enabled, + * if it is 0, pull-up is total, i.e. the pin is connected to VDD. + * @PIN_CONFIG_BIAS_PULL_DOWN: the pin will be pulled down (usually with high + * impedance to GROUND). If the argument is != 0 pull-down is enabled, + * if it is 0, pull-down is total, i.e. the pin is connected to GROUND. + * @PIN_CONFIG_BIAS_PULL_PIN_DEFAULT: the pin will be pulled up or down based + * on embedded knowledge of the controller hardware, like current mux + * function. The pull direction and possibly strength too will normally + * be decided completely inside the hardware block and not be readable + * from the kernel side. + * If the argument is != 0 pull up/down is enabled, if it is 0, the + * configuration is ignored. The proper way to disable it is to use + * @PIN_CONFIG_BIAS_DISABLE. + * @PIN_CONFIG_DRIVE_PUSH_PULL: the pin will be driven actively high and + * low, this is the most typical case and is typically achieved with two + * active transistors on the output. Setting this config will enable + * push-pull mode, the argument is ignored. + * @PIN_CONFIG_DRIVE_OPEN_DRAIN: the pin will be driven with open drain (open + * collector) which means it is usually wired with other output ports + * which are then pulled up with an external resistor. Setting this + * config will enable open drain mode, the argument is ignored. + * @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source + * (open emitter). Setting this config will enable open source mode, the + * argument is ignored. + * @PIN_CONFIG_DRIVE_STRENGTH: the pin will sink or source at most the current + * passed as argument. The argument is in mA. + * @PIN_CONFIG_INPUT_ENABLE: enable the pin's input. Note that this does not + * affect the pin's ability to drive output. 1 enables input, 0 disables + * input. + * @PIN_CONFIG_INPUT_SCHMITT_ENABLE: control schmitt-trigger mode on the pin. + * If the argument != 0, schmitt-trigger mode is enabled. If it's 0, + * schmitt-trigger mode is disabled. + * @PIN_CONFIG_INPUT_SCHMITT: this will configure an input pin to run in + * schmitt-trigger mode. If the schmitt-trigger has adjustable hysteresis, + * the threshold value is given on a custom format as argument when + * setting pins to this mode. + * @PIN_CONFIG_INPUT_DEBOUNCE: this will configure the pin to debounce mode, + * which means it will wait for signals to settle when reading inputs. The + * argument gives the debounce time in usecs. Setting the + * argument to zero turns debouncing off. + * @PIN_CONFIG_POWER_SOURCE: if the pin can select between different power + * supplies, the argument to this parameter (on a custom format) tells + * the driver which alternative power source to use. + * @PIN_CONFIG_SLEW_RATE: if the pin can select slew rate, the argument to + * this parameter (on a custom format) tells the driver which alternative + * slew rate to use. + * @PIN_CONFIG_LOW_POWER_MODE: this will configure the pin for low power + * operation, if several modes of operation are supported these can be + * passed in the argument on a custom form, else just use argument 1 + * to indicate low power mode, argument 0 turns low power mode off. + * @PIN_CONFIG_OUTPUT: this will configure the pin as an output. Use argument + * 1 to indicate high level, argument 0 to indicate low level. (Please + * see Documentation/pinctrl.txt, section "GPIO mode pitfalls" for a + * discussion around this parameter.) + * @PIN_CONFIG_END: this is the last enumerator for pin configurations, if + * you need to pass in custom configurations to the pin controller, use + * PIN_CONFIG_END+1 as the base offset. + */ +#define PIN_CONFIG_BIAS_DISABLE 0 +#define PIN_CONFIG_BIAS_HIGH_IMPEDANCE 1 +#define PIN_CONFIG_BIAS_BUS_HOLD 2 +#define PIN_CONFIG_BIAS_PULL_UP 3 +#define PIN_CONFIG_BIAS_PULL_DOWN 4 +#define PIN_CONFIG_BIAS_PULL_PIN_DEFAULT 5 +#define PIN_CONFIG_DRIVE_PUSH_PULL 6 +#define PIN_CONFIG_DRIVE_OPEN_DRAIN 7 +#define PIN_CONFIG_DRIVE_OPEN_SOURCE 8 +#define PIN_CONFIG_DRIVE_STRENGTH 9 +#define PIN_CONFIG_INPUT_ENABLE 10 +#define PIN_CONFIG_INPUT_SCHMITT_ENABLE 11 +#define PIN_CONFIG_INPUT_SCHMITT 12 +#define PIN_CONFIG_INPUT_DEBOUNCE 13 +#define PIN_CONFIG_POWER_SOURCE 14 +#define PIN_CONFIG_SLEW_RATE 15 +#define PIN_CONFIG_LOW_POWER_MODE 16 +#define PIN_CONFIG_OUTPUT 17 +#define PIN_CONFIG_END 0x7FFF + +#if CONFIG_IS_ENABLED(PINCTRL_GENERIC) +/** + * pinctrl_generic_set_state() - generic set_state operation + * Parse the DT node of @config and its children and handle generic properties + * such as "pins", "groups", "functions", and pin configuration parameters. + * + * @pctldev: pinctrl device + * @config: config device (pseudo device), pointing a config node in DTS + * @return: 0 on success, or negative error code on failure + */ +int pinctrl_generic_set_state(struct udevice *pctldev, struct udevice *config); +#else +static inline int pinctrl_generic_set_state(struct udevice *pctldev, + struct udevice *config) +{ + return -EINVAL; +} +#endif + +#if CONFIG_IS_ENABLED(PINCTRL) +/** + * pinctrl_select_state() - set a device to a given state + * + * @dev: peripheral device + * @statename: state name, like "default" + * @return: 0 on success, or negative error code on failure + */ +int pinctrl_select_state(struct udevice *dev, const char *statename); +#else +static inline int pinctrl_select_state(struct udevice *dev, + const char *statename) +{ + return -EINVAL; +} +#endif + +#endif /* __PINCTRL_H */ diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h index 3eff895ab7..1eeec74964 100644 --- a/include/dm/uclass-id.h +++ b/include/dm/uclass-id.h @@ -44,6 +44,8 @@ enum uclass_id { UCLASS_PCH, /* x86 platform controller hub */ UCLASS_PCI, /* PCI bus */ UCLASS_PCI_GENERIC, /* Generic PCI bus device */ + UCLASS_PINCTRL, /* Pinctrl (pin muxing/configuration) device */ + UCLASS_PINCONFIG, /* Pin configuration node device */ UCLASS_PMIC, /* PMIC I/O device */ UCLASS_REGULATOR, /* Regulator device */ UCLASS_RESET, /* Reset device */ |
