diff options
| -rw-r--r-- | CREDITS | 4 | ||||
| -rw-r--r-- | Makefile | 3 | ||||
| -rw-r--r-- | board/sbc8349/Makefile | 49 | ||||
| -rw-r--r-- | board/sbc8349/config.mk | 27 | ||||
| -rw-r--r-- | board/sbc8349/pci.c | 348 | ||||
| -rw-r--r-- | board/sbc8349/sbc8349.c | 585 | ||||
| -rw-r--r-- | board/sbc8349/u-boot.lds | 125 | ||||
| -rw-r--r-- | cpu/mpc83xx/spd_sdram.c | 4 | ||||
| -rw-r--r-- | doc/README.sbc8349 | 99 | ||||
| -rw-r--r-- | drivers/tsec.c | 84 | ||||
| -rw-r--r-- | drivers/tsec.h | 5 | ||||
| -rw-r--r-- | include/configs/sbc8349.h | 744 |
12 files changed, 2077 insertions, 0 deletions
@@ -160,6 +160,10 @@ N: Thomas Frieden E: ThomasF@hyperion-entertainment.com D: Support for AmigaOne +N: Paul Gortmaker +E: paul.gortmaker@windriver.com +D: Support for WRS SBC8347/8349 boards + N: Frank Gottschling E: fgottschling@eltec.de D: Support for ELTEC MHPC/BAB7xx/ELPPC boards, cfb-console, i8042, SMI LynxEM @@ -1648,6 +1648,9 @@ MPC8360EMDS_SLAVE_config: unconfig MPC8349ITX_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349itx +sbc8349_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349 + MPC832XEMDS_config \ MPC832XEMDS_HOST_33_config \ MPC832XEMDS_HOST_66_config \ diff --git a/board/sbc8349/Makefile b/board/sbc8349/Makefile new file mode 100644 index 0000000000..02cf569b5b --- /dev/null +++ b/board/sbc8349/Makefile @@ -0,0 +1,49 @@ +# +# Copyright (c) 2006 Wind River Systems, Inc. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o pci.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/sbc8349/config.mk b/board/sbc8349/config.mk new file mode 100644 index 0000000000..05fa5a07d5 --- /dev/null +++ b/board/sbc8349/config.mk @@ -0,0 +1,27 @@ +# +# Copyright (c) 2006 Wind River Systems, Inc. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# SBC8349E +# + +TEXT_BASE = 0xFFF00000 diff --git a/board/sbc8349/pci.c b/board/sbc8349/pci.c new file mode 100644 index 0000000000..eadf230983 --- /dev/null +++ b/board/sbc8349/pci.c @@ -0,0 +1,348 @@ +/* + * pci.c -- WindRiver SBC8349 PCI board support. + * Copyright (c) 2006 Wind River Systems, Inc. + * + * Based on MPC8349 PCI support but w/o PIB related code. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <asm/mmu.h> +#include <common.h> +#include <asm/global_data.h> +#include <pci.h> +#include <asm/mpc8349_pci.h> +#include <i2c.h> + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_PCI + +/* System RAM mapped to PCI space */ +#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE +#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE + +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_mpc8349emds_config_table[] = { + {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_IDSEL_NUMBER, PCI_ANY_ID, + pci_cfgfunc_config_device, {PCI_ENET0_IOADDR, + PCI_ENET0_MEMADDR, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER + } + }, + {} +}; +#endif + +static struct pci_controller pci_hose[] = { + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc8349emds_config_table, +#endif + }, + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc8349emds_config_table, +#endif + } +}; + +/************************************************************************** + * pci_init_board() + * + * NOTICE: PCI2 is not supported. There is only one + * physical PCI slot on the board. + * + */ +void +pci_init_board(void) +{ + volatile immap_t * immr; + volatile clk83xx_t * clk; + volatile law83xx_t * pci_law; + volatile pot83xx_t * pci_pot; + volatile pcictrl83xx_t * pci_ctrl; + volatile pciconf83xx_t * pci_conf; + u16 reg16; + u32 reg32; + u32 dev; + struct pci_controller * hose; + + immr = (immap_t *)CFG_IMMR; + clk = (clk83xx_t *)&immr->clk; + pci_law = immr->sysconf.pcilaw; + pci_pot = immr->ios.pot; + pci_ctrl = immr->pci_ctrl; + pci_conf = immr->pci_conf; + + hose = &pci_hose[0]; + + /* + * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode + */ + + reg32 = clk->occr; + udelay(2000); + clk->occr = 0xff000000; + udelay(2000); + + /* + * Release PCI RST Output signal + */ + pci_ctrl[0].gcr = 0; + udelay(2000); + pci_ctrl[0].gcr = 1; + +#ifdef CONFIG_MPC83XX_PCI2 + pci_ctrl[1].gcr = 0; + udelay(2000); + pci_ctrl[1].gcr = 1; +#endif + + /* We need to wait at least a 1sec based on PCI specs */ + { + int i; + + for (i = 0; i < 1000; ++i) + udelay (1000); + } + + /* + * Configure PCI Local Access Windows + */ + pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; + pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G; + + pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; + pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_4M; + + /* + * Configure PCI Outbound Translation Windows + */ + + /* PCI1 mem space - prefetch */ + pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[0].pocmr = POCMR_EN | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK); + + /* PCI1 IO space */ + pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); + + /* PCI1 mmio - non-prefetch mem space */ + pci_pot[2].potar = (CFG_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[2].pobar = (CFG_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[2].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK); + + /* + * Configure PCI Inbound Translation Windows + */ + + /* we need RAM mapped to PCI space for the devices to + * access main memory */ + pci_ctrl[0].pitar1 = 0x0; + pci_ctrl[0].pibar1 = 0x0; + pci_ctrl[0].piebar1 = 0x0; + pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); + + hose->first_busno = 0; + hose->last_busno = 0xff; + + /* PCI memory prefetch space */ + pci_set_region(hose->regions + 0, + CFG_PCI1_MEM_BASE, + CFG_PCI1_MEM_PHYS, + CFG_PCI1_MEM_SIZE, + PCI_REGION_MEM|PCI_REGION_PREFETCH); + + /* PCI memory space */ + pci_set_region(hose->regions + 1, + CFG_PCI1_MMIO_BASE, + CFG_PCI1_MMIO_PHYS, + CFG_PCI1_MMIO_SIZE, + PCI_REGION_MEM); + + /* PCI IO space */ + pci_set_region(hose->regions + 2, + CFG_PCI1_IO_BASE, + CFG_PCI1_IO_PHYS, + CFG_PCI1_IO_SIZE, + PCI_REGION_IO); + + /* System memory space */ + pci_set_region(hose->regions + 3, + CONFIG_PCI_SYS_MEM_BUS, + CONFIG_PCI_SYS_MEM_PHYS, + gd->ram_size, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose->region_count = 4; + + pci_setup_indirect(hose, + (CFG_IMMR+0x8300), + (CFG_IMMR+0x8304)); + + pci_register_hose(hose); + + /* + * Write to Command register + */ + reg16 = 0xff; + dev = PCI_BDF(hose->first_busno, 0, 0); + pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); + pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); + pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); + +#ifdef CONFIG_PCI_SCAN_SHOW + printf("PCI: Bus Dev VenId DevId Class Int\n"); +#endif + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); + +#ifdef CONFIG_MPC83XX_PCI2 + hose = &pci_hose[1]; + + /* + * Configure PCI Outbound Translation Windows + */ + + /* PCI2 mem space - prefetch */ + pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[3].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK); + + /* PCI2 IO space */ + pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[4].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); + + /* PCI2 mmio - non-prefetch mem space */ + pci_pot[5].potar = (CFG_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[5].pobar = (CFG_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[5].pocmr = POCMR_EN | POCMR_PCI2 | (POCMR_CM_256M & POCMR_CM_MASK); + + /* + * Configure PCI Inbound Translation Windows + */ + + /* we need RAM mapped to PCI space for the devices to + * access main memory */ + pci_ctrl[1].pitar1 = 0x0; + pci_ctrl[1].pibar1 = 0x0; + pci_ctrl[1].piebar1 = 0x0; + pci_ctrl[1].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); + + hose->first_busno = pci_hose[0].last_busno + 1; + hose->last_busno = 0xff; + + /* PCI memory prefetch space */ + pci_set_region(hose->regions + 0, + CFG_PCI2_MEM_BASE, + CFG_PCI2_MEM_PHYS, + CFG_PCI2_MEM_SIZE, + PCI_REGION_MEM|PCI_REGION_PREFETCH); + + /* PCI memory space */ + pci_set_region(hose->regions + 1, + CFG_PCI2_MMIO_BASE, + CFG_PCI2_MMIO_PHYS, + CFG_PCI2_MMIO_SIZE, + PCI_REGION_MEM); + + /* PCI IO space */ + pci_set_region(hose->regions + 2, + CFG_PCI2_IO_BASE, + CFG_PCI2_IO_PHYS, + CFG_PCI2_IO_SIZE, + PCI_REGION_IO); + + /* System memory space */ + pci_set_region(hose->regions + 3, + CONFIG_PCI_SYS_MEM_BUS, + CONFIG_PCI_SYS_MEM_PHYS, + gd->ram_size, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose->region_count = 4; + + pci_setup_indirect(hose, + (CFG_IMMR+0x8380), + (CFG_IMMR+0x8384)); + + pci_register_hose(hose); + + /* + * Write to Command register + */ + reg16 = 0xff; + dev = PCI_BDF(hose->first_busno, 0, 0); + pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); + pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); + pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); + + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); +#endif + +} + +#ifdef CONFIG_OF_FLAT_TREE +void +ft_pci_setup(void *blob, bd_t *bd) +{ + u32 *p; + int len; + + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); + if (p != NULL) { + p[0] = pci_hose[0].first_busno; + p[1] = pci_hose[0].last_busno; + } + +#ifdef CONFIG_MPC83XX_PCI2 + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len); + if (p != NULL) { + p[0] = pci_hose[1].first_busno; + p[1] = pci_hose[1].last_busno; + } +#endif +} +#endif /* CONFIG_OF_FLAT_TREE */ +#endif /* CONFIG_PCI */ diff --git a/board/sbc8349/sbc8349.c b/board/sbc8349/sbc8349.c new file mode 100644 index 0000000000..4cd447e097 --- /dev/null +++ b/board/sbc8349/sbc8349.c @@ -0,0 +1,585 @@ +/* + * sbc8349.c -- WindRiver SBC8349 board support. + * Copyright (c) 2006-2007 Wind River Systems, Inc. + * + * Paul Gortmaker <paul.gortmaker@windriver.com> + * Based on board/mpc8349emds/mpc8349emds.c (and previous 834x releases.) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <common.h> +#include <ioports.h> +#include <mpc83xx.h> +#include <asm/mpc8349_pci.h> +#include <i2c.h> +#include <spd.h> +#include <miiphy.h> +#include <command.h> +#if defined(CONFIG_SPD_EEPROM) +#include <spd_sdram.h> +#endif +#if defined(CONFIG_OF_FLAT_TREE) +#include <ft_build.h> +#endif + +int fixed_sdram(void); +void sdram_init(void); + +#if defined(CONFIG_DDR_ECC) && defined(CONFIG_MPC83XX) +void ddr_enable_ecc(unsigned int dram_size); +#endif + +#ifdef CONFIG_BOARD_EARLY_INIT_F +int board_early_init_f (void) +{ + return 0; +} +#endif + +#define ns2clk(ns) (ns / (1000000000 / CONFIG_8349_CLKIN) + 1) + +long int initdram (int board_type) +{ + volatile immap_t *im = (immap_t *)CFG_IMMR; + u32 msize = 0; + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) + return -1; + + puts("Initializing\n"); + + /* DDR SDRAM - Main SODIMM */ + im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; +#if defined(CONFIG_SPD_EEPROM) + msize = spd_sdram(); +#else + msize = fixed_sdram(); +#endif + /* + * Initialize SDRAM if it is on local bus. + */ + sdram_init(); + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) + /* + * Initialize and enable DDR ECC. + */ + ddr_enable_ecc(msize * 1024 * 1024); +#endif + puts(" DDR RAM: "); + /* return total bus SDRAM size(bytes) -- DDR */ + return (msize * 1024 * 1024); +} + +#if !defined(CONFIG_SPD_EEPROM) +/************************************************************************* + * fixed sdram init -- doesn't use serial presence detect. + ************************************************************************/ +int fixed_sdram(void) +{ + volatile immap_t *im = (immap_t *)CFG_IMMR; + u32 msize = 0; + u32 ddr_size; + u32 ddr_size_log2; + + msize = CFG_DDR_SIZE; + for (ddr_size = msize << 20, ddr_size_log2 = 0; + (ddr_size > 1); + ddr_size = ddr_size>>1, ddr_size_log2++) { + if (ddr_size & 1) { + return -1; + } + } + im->sysconf.ddrlaw[0].bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff); + im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); + +#if (CFG_DDR_SIZE != 256) +#warning Currently any ddr size other than 256 is not supported +#endif + im->ddr.csbnds[2].csbnds = 0x0000000f; + im->ddr.cs_config[2] = CFG_DDR_CONFIG; + + /* currently we use only one CS, so disable the other banks */ + im->ddr.cs_config[0] = 0; + im->ddr.cs_config[1] = 0; + im->ddr.cs_config[3] = 0; + + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; + + im->ddr.sdram_cfg = + SDRAM_CFG_SREN +#if defined(CONFIG_DDR_2T_TIMING) + | SDRAM_CFG_2T_EN +#endif + | 2 << SDRAM_CFG_SDRAM_TYPE_SHIFT; +#if defined (CONFIG_DDR_32BIT) + /* for 32-bit mode burst length is 8 */ + im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE); +#endif + im->ddr.sdram_mode = CFG_DDR_MODE; + + im->ddr.sdram_interval = CFG_DDR_INTERVAL; + udelay(200); + + /* enable DDR controller */ + im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; + return msize; +} +#endif/*!CFG_SPD_EEPROM*/ + + +int checkboard (void) +{ + puts("Board: Wind River SBC834x\n"); + return 0; +} + +/* + * if board is fitted with SDRAM + */ +#if defined(CFG_BR2_PRELIM) \ + && defined(CFG_OR2_PRELIM) \ + && defined(CFG_LBLAWBAR2_PRELIM) \ + && defined(CFG_LBLAWAR2_PRELIM) +/* + * Initialize SDRAM memory on the Local Bus. + */ + +void sdram_init(void) +{ + volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile lbus83xx_t *lbc= &immap->lbus; + uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE; + + puts("\n SDRAM on Local Bus: "); + print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); + + /* + * Setup SDRAM Base and Option Registers, already done in cpu_init.c + */ + + /* setup mtrpt, lsrt and lbcr for LB bus */ + lbc->lbcr = CFG_LBC_LBCR; + lbc->mrtpr = CFG_LBC_MRTPR; + lbc->lsrt = CFG_LBC_LSRT; + asm("sync"); + + /* + * Configure the SDRAM controller Machine Mode Register. + */ + lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */ + + lbc->lsdmr = CFG_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */ + asm("sync"); + *sdram_addr = 0xff; + udelay(100); + + lbc->lsdmr = CFG_LBC_LSDMR_2; /* 0x48636733; auto refresh */ + asm("sync"); + /*1 times*/ + *sdram_addr = 0xff; + udelay(100); + /*2 times*/ + *sdram_addr = 0xff; + udelay(100); + /*3 times*/ + *sdram_addr = 0xff; + udelay(100); + /*4 times*/ + *sdram_addr = 0xff; + udelay(100); + /*5 times*/ + *sdram_addr = 0xff; + udelay(100); + /*6 times*/ + *sdram_addr = 0xff; + udelay(100); + /*7 times*/ + *sdram_addr = 0xff; + udelay(100); + /*8 times*/ + *sdram_addr = 0xff; + udelay(100); + + /* 0x58636733; mode register write operation */ + lbc->lsdmr = CFG_LBC_LSDMR_4; + asm("sync"); + *sdram_addr = 0xff; + udelay(100); + + lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */ + asm("sync"); + *sdram_addr = 0xff; + udelay(100); +} +#else +void sdram_init(void) +{ + puts(" SDRAM on Local Bus: Disabled in config\n"); +} +#endif + +#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) +/* + * ECC user commands + */ +void ecc_print_status(void) +{ + volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile ddr83xx_t *ddr = &immap->ddr; + + printf("\nECC mode: %s\n\n", (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF"); + + /* Interrupts */ + printf("Memory Error Interrupt Enable:\n"); + printf(" Multiple-Bit Error Interrupt Enable: %d\n", + (ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0); + printf(" Single-Bit Error Interrupt Enable: %d\n", + (ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0); + printf(" Memory Select Error Interrupt Enable: %d\n\n", + (ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0); + + /* Error disable */ + printf("Memory Error Disable:\n"); + printf(" Multiple-Bit Error Disable: %d\n", + (ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0); + printf(" Sinle-Bit Error Disable: %d\n", + (ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0); + printf(" Memory Select Error Disable: %d\n\n", + (ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0); + + /* Error injection */ + printf("Memory Data Path Error Injection Mask High/Low: %08lx %08lx\n", + ddr->data_err_inject_hi, ddr->data_err_inject_lo); + + printf("Memory Data Path Error Injection Mask ECC:\n"); + printf(" ECC Mirror Byte: %d\n", + (ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0); + printf(" ECC Injection Enable: %d\n", + (ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0); + printf(" ECC Error Injection Mask: 0x%02x\n\n", + ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM); + + /* SBE counter/threshold */ + printf("Memory Single-Bit Error Management (0..255):\n"); + printf(" Single-Bit Error Threshold: %d\n", + (ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT); + printf(" Single-Bit Error Counter: %d\n\n", + (ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT); + + /* Error detect */ + printf("Memory Error Detect:\n"); + printf(" Multiple Memory Errors: %d\n", + (ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0); + printf(" Multiple-Bit Error: %d\n", + (ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0); + printf(" Single-Bit Error: %d\n", + (ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0); + printf(" Memory Select Error: %d\n\n", + (ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0); + + /* Capture data */ + printf("Memory Error Address Capture: 0x%08lx\n", ddr->capture_address); + printf("Memory Data Path Read Capture High/Low: %08lx %08lx\n", + ddr->capture_data_hi, ddr->capture_data_lo); + printf("Memory Data Path Read Capture ECC: 0x%02x\n\n", + ddr->capture_ecc & CAPTURE_ECC_ECE); + + printf("Memory Error Attributes Capture:\n"); + printf(" Data Beat Number: %d\n", + (ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >> ECC_CAPT_ATTR_BNUM_SHIFT); + printf(" Transaction Size: %d\n", + (ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >> ECC_CAPT_ATTR_TSIZ_SHIFT); + printf(" Transaction Source: %d\n", + (ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >> ECC_CAPT_ATTR_TSRC_SHIFT); + printf(" Transaction Type: %d\n", + (ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >> ECC_CAPT_ATTR_TTYP_SHIFT); + printf(" Error Information Valid: %d\n\n", + ddr->capture_attributes & ECC_CAPT_ATTR_VLD); +} + +int do_ecc ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile ddr83xx_t *ddr = &immap->ddr; + volatile u32 val; + u64 *addr, count, val64; + register u64 *i; + + if (argc > 4) { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + if (argc == 2) { + if (strcmp(argv[1], "status") == 0) { + ecc_print_status(); + return 0; + } else if (strcmp(argv[1], "captureclear") == 0) { + ddr->capture_address = 0; + ddr->capture_data_hi = 0; + ddr->capture_data_lo = 0; + ddr->capture_ecc = 0; + ddr->capture_attributes = 0; + return 0; + } + } + + if (argc == 3) { + if (strcmp(argv[1], "sbecnt") == 0) { + val = simple_strtoul(argv[2], NULL, 10); + if (val > 255) { + printf("Incorrect Counter value, should be 0..255\n"); + return 1; + } + + val = (val << ECC_ERROR_MAN_SBEC_SHIFT); + val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET); + + ddr->err_sbe = val; + return 0; + } else if (strcmp(argv[1], "sbethr") == 0) { + val = simple_strtoul(argv[2], NULL, 10); + if (val > 255) { + printf("Incorrect Counter value, should be 0..255\n"); + return 1; + } + + val = (val << ECC_ERROR_MAN_SBET_SHIFT); + val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC); + + ddr->err_sbe = val; + return 0; + } else if (strcmp(argv[1], "errdisable") == 0) { + val = ddr->err_disable; + + if (strcmp(argv[2], "+sbe") == 0) { + val |= ECC_ERROR_DISABLE_SBED; + } else if (strcmp(argv[2], "+mbe") == 0) { + val |= ECC_ERROR_DISABLE_MBED; + } else if (strcmp(argv[2], "+mse") == 0) { + val |= ECC_ERROR_DISABLE_MSED; + } else if (strcmp(argv[2], "+all") == 0) { + val |= (ECC_ERROR_DISABLE_SBED | + ECC_ERROR_DISABLE_MBED | + ECC_ERROR_DISABLE_MSED); + } else if (strcmp(argv[2], "-sbe") == 0) { + val &= ~ECC_ERROR_DISABLE_SBED; + } else if (strcmp(argv[2], "-mbe") == 0) { + val &= ~ECC_ERROR_DISABLE_MBED; + } else if (strcmp(argv[2], "-mse") == 0) { + val &= ~ECC_ERROR_DISABLE_MSED; + } else if (strcmp(argv[2], "-all") == 0) { + val &= ~(ECC_ERROR_DISABLE_SBED | + ECC_ERROR_DISABLE_MBED | + ECC_ERROR_DISABLE_MSED); + } else { + printf("Incorrect err_disable field\n"); + return 1; + } + + ddr->err_disable = val; + __asm__ __volatile__ ("sync"); + __asm__ __volatile__ ("isync"); + return 0; + } else if (strcmp(argv[1], "errdetectclr") == 0) { + val = ddr->err_detect; + + if (strcmp(argv[2], "mme") == 0) { + val |= ECC_ERROR_DETECT_MME; + } else if (strcmp(argv[2], "sbe") == 0) { + val |= ECC_ERROR_DETECT_SBE; + } else if (strcmp(argv[2], "mbe") == 0) { + val |= ECC_ERROR_DETECT_MBE; + } else if (strcmp(argv[2], "mse") == 0) { + val |= ECC_ERROR_DETECT_MSE; + } else if (strcmp(argv[2], "all") == 0) { + val |= (ECC_ERROR_DETECT_MME | + ECC_ERROR_DETECT_MBE | + ECC_ERROR_DETECT_SBE | + ECC_ERROR_DETECT_MSE); + } else { + printf("Incorrect err_detect field\n"); + return 1; + } + + ddr->err_detect = val; + return 0; + } else if (strcmp(argv[1], "injectdatahi") == 0) { + val = simple_strtoul(argv[2], NULL, 16); + + ddr->data_err_inject_hi = val; + return 0; + } else if (strcmp(argv[1], "injectdatalo") == 0) { + val = simple_strtoul(argv[2], NULL, 16); + + ddr->data_err_inject_lo = val; + return 0; + } else if (strcmp(argv[1], "injectecc") == 0) { + val = simple_strtoul(argv[2], NULL, 16); + if (val > 0xff) { + printf("Incorrect ECC inject mask, should be 0x00..0xff\n"); + return 1; + } + val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM); + + ddr->ecc_err_inject = val; + return 0; + } else if (strcmp(argv[1], "inject") == 0) { + val = ddr->ecc_err_inject; + + if (strcmp(argv[2], "en") == 0) + val |= ECC_ERR_INJECT_EIEN; + else if (strcmp(argv[2], "dis") == 0) + val &= ~ECC_ERR_INJECT_EIEN; + else + printf("Incorrect command\n"); + + ddr->ecc_err_inject = val; + __asm__ __volatile__ ("sync"); + __asm__ __volatile__ ("isync"); + return 0; + } else if (strcmp(argv[1], "mirror") == 0) { + val = ddr->ecc_err_inject; + + if (strcmp(argv[2], "en") == 0) + val |= ECC_ERR_INJECT_EMB; + else if (strcmp(argv[2], "dis") == 0) + val &= ~ECC_ERR_INJECT_EMB; + else + printf("Incorrect command\n"); + + ddr->ecc_err_inject = val; + return 0; + } + } + + if (argc == 4) { + if (strcmp(argv[1], "test") == 0) { + addr = (u64 *)simple_strtoul(argv[2], NULL, 16); + count = simple_strtoul(argv[3], NULL, 16); + + if ((u32)addr % 8) { + printf("Address not alligned on double word boundary\n"); + return 1; + } + + disable_interrupts(); + icache_disable(); + + for (i = addr; i < addr + count; i++) { + /* enable injects */ + ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN; + __asm__ __volatile__ ("sync"); + __asm__ __volatile__ ("isync"); + + /* write memory location injecting errors */ + *i = 0x1122334455667788ULL; + __asm__ __volatile__ ("sync"); + + /* disable injects */ + ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN; + __asm__ __volatile__ ("sync"); + __asm__ __volatile__ ("isync"); + + /* read data, this generates ECC error */ + val64 = *i; + __asm__ __volatile__ ("sync"); + + /* disable errors for ECC */ + ddr->err_disable |= ~ECC_ERROR_ENABLE; + __asm__ __volatile__ ("sync"); + __asm__ __volatile__ ("isync"); + + /* re-initialize memory, write the location again + * NOT injecting errors this time */ + *i = 0xcafecafecafecafeULL; + __asm__ __volatile__ ("sync"); + + /* enable errors for ECC */ + ddr->err_disable &= ECC_ERROR_ENABLE; + __asm__ __volatile__ ("sync"); + __asm__ __volatile__ ("isync"); + } + + icache_enable(); + enable_interrupts(); + + return 0; + } + } + + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; +} + +U_BOOT_CMD( + ecc, 4, 0, do_ecc, + "ecc - support for DDR ECC features\n", + "status - print out status info\n" + "ecc captureclear - clear capture regs data\n" + "ecc sbecnt <val> - set Single-Bit Error counter\n" + "ecc sbethr <val> - set Single-Bit Threshold\n" + "ecc errdisable <flag> - clear/set disable Memory Error Disable, flag:\n" + " [-|+]sbe - Single-Bit Error\n" + " [-|+]mbe - Multiple-Bit Error\n" + " [-|+]mse - Memory Select Error\n" + " [-|+]all - all errors\n" + "ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n" + " mme - Multiple Memory Errors\n" + " sbe - Single-Bit Error\n" + " mbe - Multiple-Bit Error\n" + " mse - Memory Select Error\n" + " all - all errors\n" + "ecc injectdatahi <hi> - set Memory Data Path Error Injection Mask High\n" + "ecc injectdatalo <lo> - set Memory Data Path Error Injection Mask Low\n" + "ecc injectecc <ecc> - set ECC Error Injection Mask\n" + "ecc inject <en|dis> - enable/disable error injection\n" + "ecc mirror <en|dis> - enable/disable mirror byte\n" + "ecc test <addr> <cnt> - test mem region:\n" + " - enables injects\n" + " - writes pattern injecting errors\n" + " - disables injects\n" + " - reads pattern back, generates error\n" + " - re-inits memory" +); +#endif /* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */ + +#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) +void +ft_board_setup(void *blob, bd_t *bd) +{ + u32 *p; + int len; + +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif + ft_cpu_setup(blob, bd); + + p = ft_get_prop(blob, "/memory/reg", &len); + if (p != NULL) { + *p++ = cpu_to_be32(bd->bi_memstart); + *p = cpu_to_be32(bd->bi_memsize); + } +} +#endif diff --git a/board/sbc8349/u-boot.lds b/board/sbc8349/u-boot.lds new file mode 100644 index 0000000000..e32c0754cf --- /dev/null +++ b/board/sbc8349/u-boot.lds @@ -0,0 +1,125 @@ +/* + * Copyright (c) 2006 Wind River Systems, Inc. + * u-boot.lds for WindRiver SBC8349. + * + * Based on the MPC8349 u-boot.lds + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/mpc83xx/start.o (.text) + *(.text) + *(.fixup) + *(.got1) + . = ALIGN(16); + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FFF) & 0xFFFFF000; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(4096); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} +ENTRY(_start) diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c index 0d93f2e1ea..108328a7f4 100644 --- a/cpu/mpc83xx/spd_sdram.c +++ b/cpu/mpc83xx/spd_sdram.c @@ -440,10 +440,14 @@ long int spd_sdram() ddr->sdram_interval = ((refresh_clk & 0x3fff) << 16) | 0x100; debug("DDR:sdram_interval=0x%08x\n", ddr->sdram_interval); +#ifdef CFG_DDR_SDRAM_CLK_CNTL /* Optional platform specific value */ + ddr->sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL; +#else /* SS_EN = 0, source synchronous disable * CLK_ADJST = 0, MCK/MCK# is launched aligned with addr/cmd */ ddr->sdram_clk_cntl = 0x00000000; +#endif debug("DDR:sdram_clk_cntl=0x%08x\n", ddr->sdram_clk_cntl); asm("sync;isync"); diff --git a/doc/README.sbc8349 b/doc/README.sbc8349 new file mode 100644 index 0000000000..a0ac6388d6 --- /dev/null +++ b/doc/README.sbc8349 @@ -0,0 +1,99 @@ + + + U-Boot for Wind River SBC834x Boards + ==================================== + + +The Wind River SBC834x board is a 6U form factor (not CPCI) reference +design that uses the MPC8347E or MPC8349E processor. U-Boot support +for this board is heavily based on the existing U-Boot support for +Freescale MPC8349 reference boards. + +Support has been primarily tested on the SBC8349 version of the board, +although earlier versions were also tested on the SBC8347. The primary +difference in the two is the level of PCI functionality. + + http://www.windriver.com/products/OCD/SBC8347E_49E/ + + +Flash Details: +============== + +The flash type is intel 28F640Jx (4096x16) [one device]. Base address +is 0xFF80_0000 which is also where the Hardware Reset Configuration +Word (HRCW) is stored. Caution should be used to not overwrite the +HRCW, or "CF RCW" with a Wind River ICE will be required to restore +the HRCW and allow the board to enter background mode for further +steps in the flash process. + + +Restoring a corrupted or missing flash image: +============================================= + +Details for storing U-boot to flash using a Wind River ICE can be found +on page 19 of the board manual (request ERG-00328-001). The following +is a summary of that information: + + - Connect ICE and establish connection to it from WorkBench/OCD. + - Ensure you have background mode (BKM) in the OCD terminal window. + - Select the appropriate flash type (listed above) + - Prepare a u-boot image by using the Wind River Convert utility; + by using "Convert and Add file" on the ELF file from your build. + Convert from FFF0_0000 to FFFF_FFFF (or to FFF3_FFFF if you are + trying to preserve your old environment settings). + - Set the start address of the erase/flash process to FFF0_0000 + - Set the target RAM required to 64kB. + - Select sectors for erasing (see note on enviroment below) + - Select Erase and Reprogram. + +Note that some versions of the register files used with Workbench +would zero some TSEC registers, which inhibits ethernet operation +by u-boot when this register file is played to the target. Using +"INN" in the OCD terminal window instead of "IN" before the "GO" +will not play the register file, and allow u-boot to use the TSEC +interface while executed from the ICE "GO" command. + +Alternatively, you can locate the register file which will be named +WRS_SBC8349_PCT00328001.reg or similar) and "REM" out all the lines +beginning with "SCGA TSEC1" and "SCGA TSEC2". This allows you to +use all the remaining register file content. + +If you wish to preserve your prior U-Boot environment settings, +then convert (and erase to) 0xFFF3FFFF instead of 0xFFFFFFFF. +The size for converting (and erasing) must be at least as large +as u-boot.bin. + + +Updating U-Boot with U-Boot: +============================ + +This procedure is very similar to other boards that have u-boot installed. +Assuming that the network has been configured, and that the new u-boot.bin +has been copied to the TFTP server, the commands are: + + tftp 200000 u-boot.bin + protect off all + erase fff00000 fff3ffff + cp.b 200000 fff00000 3ffff + protect on all + + +PCI: +==== + +This board and U-Boot have been tested with PCI built in, on a SBC8349 +and confirmed that the "pci" command showed the intel e1000 that was +present in the PCI slot. Note that if a 33MHz 32bit card is inserted +in the slot, then the whole board will clock down to a 33MHz base +clock instead of the default 66MHz. This will change the baud clocks +and mess up your serial console output. If you want to use a 33MHz PCI +card, then you should build a U-Boot with #undef PCI_66M in the +include/configs/sbc8349.h and store this to flash prior to powering down +the board and inserting the 33MHz PCI card. + +By default PCI support is disabled to better support very early +revision MPC834x chips with possible PCI issues. Also PCI support is +untested on the sbc8347 variants at this point in time. + + + Paul Gortmaker, 01/2007 diff --git a/drivers/tsec.c b/drivers/tsec.c index 2524e4f6d2..3f11eb03b4 100644 --- a/drivers/tsec.c +++ b/drivers/tsec.c @@ -381,6 +381,61 @@ uint mii_parse_sr(uint mii_reg, struct tsec_private * priv) return 0; } +/* + * Parse the BCM54xx status register for speed and duplex information. + * The linux sungem_phy has this information, but in a table format. + */ +uint mii_parse_BCM54xx_sr(uint mii_reg, struct tsec_private *priv) +{ + + switch((mii_reg & MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK) >> MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT){ + + case 1: + printf("Enet starting in 10BT/HD\n"); + priv->duplexity = 0; + priv->speed = 10; + break; + + case 2: + printf("Enet starting in 10BT/FD\n"); + priv->duplexity = 1; + priv->speed = 10; + break; + + case 3: + printf("Enet starting in 100BT/HD\n"); + priv->duplexity = 0; + priv->speed = 100; + break; + + case 5: + printf("Enet starting in 100BT/FD\n"); + priv->duplexity = 1; + priv->speed = 100; + break; + + case 6: + printf("Enet starting in 1000BT/HD\n"); + priv->duplexity = 0; + priv->speed = 1000; + break; + + case 7: + printf("Enet starting in 1000BT/FD\n"); + priv->duplexity = 1; + priv->speed = 1000; + break; + + default: + printf("Auto-neg error, defaulting to 10BT/HD\n"); + priv->duplexity = 0; + priv->speed = 10; + break; + } + + return 0; + +} /* Parse the 88E1011's status register for speed and duplex * information */ @@ -770,6 +825,34 @@ static void tsec_halt(struct eth_device *dev) phy_run_commands(priv, priv->phyinfo->shutdown); } +/* The 5411 id is 0x206070, the 5421 is 0x2060e0 */ +struct phy_info phy_info_BCM5461S = { + 0x02060c1, /* 5461 ID */ + "Broadcom BCM5461S", + 0, /* not clear to me what minor revisions we can shift away */ + (struct phy_cmd[]) { /* config */ + /* Reset and configure the PHY */ + {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, + {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL}, + {MIIM_ANAR, MIIM_ANAR_INIT, NULL}, + {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, + {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init}, + {miim_end,} + }, + (struct phy_cmd[]) { /* startup */ + /* Status is read once to clear old link state */ + {MIIM_STATUS, miim_read, NULL}, + /* Auto-negotiate */ + {MIIM_STATUS, miim_read, &mii_parse_sr}, + /* Read the status */ + {MIIM_BCM54xx_AUXSTATUS, miim_read, &mii_parse_BCM54xx_sr}, + {miim_end,} + }, + (struct phy_cmd[]) { /* shutdown */ + {miim_end,} + }, +}; + struct phy_info phy_info_M88E1011S = { 0x01410c6, "Marvell 88E1011S", @@ -1112,6 +1195,7 @@ struct phy_info phy_info_dp83865 = { struct phy_info *phy_info[] = { &phy_info_cis8204, &phy_info_cis8201, + &phy_info_BCM5461S, &phy_info_M88E1011S, &phy_info_M88E1111S, &phy_info_M88E1145, diff --git a/drivers/tsec.h b/drivers/tsec.h index cee30037db..422bc66922 100644 --- a/drivers/tsec.h +++ b/drivers/tsec.h @@ -109,6 +109,11 @@ #define MIIM_GBIT_CONTROL 0x9 #define MIIM_GBIT_CONTROL_INIT 0xe00 +/* Broadcom BCM54xx -- taken from linux sungem_phy */ +#define MIIM_BCM54xx_AUXSTATUS 0x19 +#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK 0x0700 +#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT 8 + /* Cicada Auxiliary Control/Status Register */ #define MIIM_CIS8201_AUX_CONSTAT 0x1c #define MIIM_CIS8201_AUXCONSTAT_INIT 0x0004 diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h new file mode 100644 index 0000000000..2e6685d90b --- /dev/null +++ b/include/configs/sbc8349.h @@ -0,0 +1,744 @@ +/* + * WindRiver SBC8349 U-Boot configuration file. + * Copyright (c) 2006, 2007 Wind River Systems, Inc. + * + * Paul Gortmaker <paul.gortmaker@windriver.com> + * Based on the MPC8349EMDS config. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * sbc8349 board configuration file. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#undef DEBUG + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 /* E300 Family */ +#define CONFIG_MPC83XX 1 /* MPC83XX family */ +#define CONFIG_MPC834X 1 /* MPC834X family */ +#define CONFIG_MPC8349 1 /* MPC8349 specific */ +#define CONFIG_SBC8349 1 /* WRS SBC8349 board specific */ + +#undef CONFIG_PCI +/* Don't enable PCI2 on sbc834x - it doesn't exist physically. */ +#undef CONFIG_MPC83XX_PCI2 /* support for 2nd PCI controller */ + +#define PCI_66M +#ifdef PCI_66M +#define CONFIG_83XX_CLKIN 66000000 /* in Hz */ +#else +#define CONFIG_83XX_CLKIN 33000000 /* in Hz */ +#endif + +#ifndef CONFIG_SYS_CLK_FREQ +#ifdef PCI_66M +#define CONFIG_SYS_CLK_FREQ 66000000 +#define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_4X1 +#else +#define CONFIG_SYS_CLK_FREQ 33000000 +#define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_8X1 +#endif +#endif + +#define CFG_SCCR_INIT (SCCR_DEFAULT & (~SCCR_CLK_MASK)) +#define CFG_SCCR_TSEC1CM SCCR_TSEC1CM_1 /* TSEC1 clock setting */ +#define CFG_SCCR_TSEC2CM SCCR_TSEC2CM_1 /* TSEC2 clock setting */ +#define CFG_SCCR_ENCCM SCCR_ENCCM_3 /* ENC clock setting */ +#define CFG_SCCR_USBCM SCCR_USBCM_3 /* USB clock setting */ +#define CFG_SCCR_VAL ( CFG_SCCR_INIT \ + | CFG_SCCR_TSEC1CM \ + | CFG_SCCR_TSEC2CM \ + | CFG_SCCR_ENCCM \ + | CFG_SCCR_USBCM ) + +#undef CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ + +#define CFG_IMMR 0xE0000000 + +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00000000 /* memtest region */ +#define CFG_MEMTEST_END 0x00100000 + +/* + * DDR Setup + */ +#undef CONFIG_DDR_ECC /* only for ECC DDR module */ +#undef CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */ +#define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ +#define CFG_83XX_DDR_USES_CS0 /* WRS; Fsl board uses CS2/CS3 */ + +/* + * 32-bit data path mode. + * + * Please note that using this mode for devices with the real density of 64-bit + * effectively reduces the amount of available memory due to the effect of + * wrapping around while translating address to row/columns, for example in the + * 256MB module the upper 128MB get aliased with contents of the lower + * 128MB); normally this define should be used for devices with real 32-bit + * data path. + */ +#undef CONFIG_DDR_32BIT + +#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/ +#define CFG_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ + DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075) +#define CONFIG_DDR_2T_TIMING + +#if defined(CONFIG_SPD_EEPROM) +/* + * Determine DDR configuration from I2C interface. + */ +#define SPD_EEPROM_ADDRESS 0x52 /* DDR DIMM */ + +#else +/* + * Manually set up DDR parameters + * NB: manual DDR setup untested on sbc834x + */ +#define CFG_DDR_SIZE 256 /* MB */ +#define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10) +#define CFG_DDR_TIMING_1 0x36332321 +#define CFG_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */ +#define CFG_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */ +#define CFG_DDR_INTERVAL 0x04060100 /* autocharge,no open page */ + +#if defined(CONFIG_DDR_32BIT) +/* set burst length to 8 for 32-bit data path */ +#define CFG_DDR_MODE 0x00000023 /* DLL,normal,seq,4/2.5, 8 burst len */ +#else +/* the default burst length is 4 - for 64-bit data path */ +#define CFG_DDR_MODE 0x00000022 /* DLL,normal,seq,4/2.5, 4 burst len */ +#endif +#endif + +/* + * SDRAM on the Local Bus + */ +#define CFG_LBC_SDRAM_BASE 0x10000000 /* Localbus SDRAM */ +#define CFG_LBC_SDRAM_SIZE 128 /* LBC SDRAM is 128MB */ + +/* + * FLASH on the Local Bus + */ +#define CFG_FLASH_CFI /* use the Common Flash Interface */ +#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CFG_FLASH_BASE 0xFF800000 /* start of FLASH */ +#define CFG_FLASH_SIZE 8 /* flash size in MB */ +/* #define CFG_FLASH_USE_BUFFER_WRITE */ + +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* flash Base address */ \ + (2 << BR_PS_SHIFT) | /* 32 bit port size */ \ + BR_V) /* valid */ + +#define CFG_OR0_PRELIM 0xFF806FF7 /* 8 MB flash size */ +#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* window base at flash base */ +#define CFG_LBLAWAR0_PRELIM 0x80000016 /* 8 MB window size */ + +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 64 /* sectors per device */ + +#undef CFG_FLASH_CHECKSUM +#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CFG_MID_FLASH_JUMP 0x7F000000 +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT +#else +#undef CFG_RAMBOOT +#endif + +#define CONFIG_L1_INIT_RAM +#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/ + +#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ + +/* + * Local Bus LCRR and LBCR regs + * LCRR: DLL bypass, Clock divider is 4 + * External Local Bus rate is + * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV + */ +#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) +#define CFG_LBC_LBCR 0x00000000 + +#undef CFG_LB_SDRAM /* if board has SDRAM on local bus */ + +#ifdef CFG_LB_SDRAM +/* Local bus BR2, OR2 definition for SDRAM if soldered on the board*/ +/* + * Base Register 2 and Option Register 2 configure SDRAM. + * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000. + * + * For BR2, need: + * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 + * port-size = 32-bits = BR2[19:20] = 11 + * no parity checking = BR2[21:22] = 00 + * SDRAM for MSEL = BR2[24:26] = 011 + * Valid = BR[31] = 1 + * + * 0 4 8 12 16 20 24 28 + * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861 + * + * FIXME: CFG_LBC_SDRAM_BASE should be masked and OR'ed into + * FIXME: the top 17 bits of BR2. + */ + +#define CFG_BR2_PRELIM 0xF0001861 /* Port-size=32bit, MSEL=SDRAM */ +#define CFG_LBLAWBAR2_PRELIM 0xF0000000 +#define CFG_LBLAWAR2_PRELIM 0x80000019 /* 64M */ + +/* + * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64. + * + * For OR2, need: + * 64MB mask for AM, OR2[0:7] = 1111 1100 + * XAM, OR2[17:18] = 11 + * 9 columns OR2[19-21] = 010 + * 13 rows OR2[23-25] = 100 + * EAD set for extra time OR[31] = 1 + * + * 0 4 8 12 16 20 24 28 + * 1111 1100 0000 0000 0110 1001 0000 0001 = FC006901 + */ + +#define CFG_OR2_PRELIM 0xFC006901 + +#define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */ +#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32 */ + +/* + * LSDMR masks + */ +#define CFG_LBC_LSDMR_RFEN (1 << (31 - 1)) +#define CFG_LBC_LSDMR_BSMA1516 (3 << (31 - 10)) +#define CFG_LBC_LSDMR_BSMA1617 (4 << (31 - 10)) +#define CFG_LBC_LSDMR_RFCR5 (3 << (31 - 16)) +#define CFG_LBC_LSDMR_RFCR8 (5 << (31 - 16)) +#define CFG_LBC_LSDMR_RFCR16 (7 << (31 - 16)) +#define CFG_LBC_LSDMR_PRETOACT3 (3 << (31 - 19)) +#define CFG_LBC_LSDMR_PRETOACT6 (5 << (31 - 19)) +#define CFG_LBC_LSDMR_PRETOACT7 (7 << (31 - 19)) +#define CFG_LBC_LSDMR_ACTTORW3 (3 << (31 - 22)) +#define CFG_LBC_LSDMR_ACTTORW7 (7 << (31 - 22)) +#define CFG_LBC_LSDMR_ACTTORW6 (6 << (31 - 22)) +#define CFG_LBC_LSDMR_BL8 (1 << (31 - 23)) +#define CFG_LBC_LSDMR_WRC2 (2 << (31 - 27)) +#define CFG_LBC_LSDMR_WRC3 (3 << (31 - 27)) +#define CFG_LBC_LSDMR_WRC4 (0 << (31 - 27)) +#define CFG_LBC_LSDMR_BUFCMD (1 << (31 - 29)) +#define CFG_LBC_LSDMR_CL3 (3 << (31 - 31)) + +#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4)) + +#define CFG_LBC_LSDMR_COMMON ( CFG_LBC_LSDMR_RFEN \ + | CFG_LBC_LSDMR_BSMA1516 \ + | CFG_LBC_LSDMR_RFCR8 \ + | CFG_LBC_LSDMR_PRETOACT6 \ + | CFG_LBC_LSDMR_ACTTORW3 \ + | CFG_LBC_LSDMR_BL8 \ + | CFG_LBC_LSDMR_WRC3 \ + | CFG_LBC_LSDMR_CL3 \ + ) + +/* + * SDRAM Controller configuration sequence. + */ +#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_PCHALL) +#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_ARFRSH) +#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_ARFRSH) +#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_MRW) +#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_NORMAL) +#endif + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +#define CFG_NS16550_COM1 (CFG_IMMR+0x4500) +#define CFG_NS16550_COM2 (CFG_IMMR+0x4600) + +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +/* pass open firmware flat tree */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 + +#define OF_CPU "PowerPC,8349@0" +#define OF_SOC "soc8349@e0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc8349@e0000000/serial@4500" + +/* I2C */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_FSL_I2C +#define CONFIG_I2C_CMD_TREE +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ +#define CFG_I2C1_OFFSET 0x3000 +#define CFG_I2C2_OFFSET 0x3100 +#define CFG_I2C_OFFSET CFG_I2C2_OFFSET +/* could also use CONFIG_I2C_MULTI_BUS and CONFIG_SPD_BUS_NUM... */ + +/* TSEC */ +#define CFG_TSEC1_OFFSET 0x24000 +#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET) +#define CFG_TSEC2_OFFSET 0x25000 +#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET) + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CFG_PCI1_MEM_BASE 0x80000000 +#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE +#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_MMIO_BASE 0x90000000 +#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE +#define CFG_PCI1_MMIO_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_IO_BASE 0x00000000 +#define CFG_PCI1_IO_PHYS 0xE2000000 +#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */ + +#define CFG_PCI2_MEM_BASE 0xA0000000 +#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE +#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI2_MMIO_BASE 0xB0000000 +#define CFG_PCI2_MMIO_PHYS CFG_PCI2_MMIO_BASE +#define CFG_PCI2_MMIO_SIZE 0x10000000 /* 256M */ +#define CFG_PCI2_IO_BASE 0x00000000 +#define CFG_PCI2_IO_PHYS 0xE2100000 +#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */ + +#if defined(CONFIG_PCI) + +#define PCI_64BIT +#define PCI_ONE_PCI1 +#if defined(PCI_64BIT) +#undef PCI_ALL_PCI1 +#undef PCI_TWO_PCI1 +#undef PCI_ONE_PCI1 +#endif + +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +#undef CONFIG_EEPRO100 +#undef CONFIG_TULIP + +#if !defined(CONFIG_PCI_PNP) + #define PCI_ENET0_IOADDR 0xFIXME + #define PCI_ENET0_MEMADDR 0xFIXME + #define PCI_IDSEL_NUMBER 0xFIXME +#endif + +#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ + +#endif /* CONFIG_PCI */ + +/* + * TSEC configuration + */ +#define CONFIG_TSEC_ENET /* TSEC ethernet support */ + +#if defined(CONFIG_TSEC_ENET) +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI 1 +#endif + +#define CONFIG_MPC83XX_TSEC1 1 +#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0" +#define CONFIG_MPC83XX_TSEC2 1 +#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1" +#define CONFIG_PHY_BCM5421S 1 +#define TSEC1_PHY_ADDR 0x19 +#define TSEC2_PHY_ADDR 0x1a +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 + +/* Options are: TSEC[0-1] */ +#define CONFIG_ETHPRIME "TSEC0" + +#endif /* CONFIG_TSEC_ENET */ + +/* + * Environment + */ +#ifndef CFG_RAMBOOT + #define CFG_ENV_IS_IN_FLASH 1 + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) + #define CFG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ + #define CFG_ENV_SIZE 0x2000 + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +#else + #define CFG_NO_FLASH 1 /* Flash is not usable now */ + #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ + #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) + #define CFG_ENV_SIZE 0x2000 +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#if defined(CFG_RAMBOOT) +#if defined(CONFIG_PCI) +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ + | CFG_CMD_PING \ + | CFG_CMD_PCI \ + | CFG_CMD_I2C) \ + & \ + ~(CFG_CMD_ENV \ + | CFG_CMD_LOADS)) +#else +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ + | CFG_CMD_PING \ + | CFG_CMD_I2C) \ + & \ + ~(CFG_CMD_ENV \ + | CFG_CMD_LOADS)) +#endif +#else +#if defined(CONFIG_PCI) +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ + | CFG_CMD_PCI \ + | CFG_CMD_PING \ + | CFG_CMD_I2C \ + ) +#else +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ + | CFG_CMD_PING \ + | CFG_CMD_I2C \ + | CFG_CMD_MII \ + ) +#endif +#endif + +#include <cmd_confdefs.h> + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else + #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ + +/* Cache Configuration */ +#define CFG_DCACHE_SIZE 32768 +#define CFG_CACHELINE_SIZE 32 +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ +#endif + +#define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST */ + +#if 1 /*528/264*/ +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_1X1 |\ + HRCWL_CSB_TO_CLKIN |\ + HRCWL_VCO_1X2 |\ + HRCWL_CORE_TO_CSB_2X1) +#elif 0 /*396/132*/ +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_1X1 |\ + HRCWL_CSB_TO_CLKIN |\ + HRCWL_VCO_1X4 |\ + HRCWL_CORE_TO_CSB_3X1) +#elif 0 /*264/132*/ +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_1X1 |\ + HRCWL_CSB_TO_CLKIN |\ + HRCWL_VCO_1X4 |\ + HRCWL_CORE_TO_CSB_2X1) +#elif 0 /*132/132*/ +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_1X1 |\ + HRCWL_CSB_TO_CLKIN |\ + HRCWL_VCO_1X4 |\ + HRCWL_CORE_TO_CSB_1X1) +#elif 0 /*264/264 */ +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_1X1 |\ + HRCWL_CSB_TO_CLKIN |\ + HRCWL_VCO_1X4 |\ + HRCWL_CORE_TO_CSB_1X1) +#endif + +#if defined(PCI_64BIT) +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_HOST |\ + HRCWH_64_BIT_PCI |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_PCI2_ARBITER_DISABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0X00000100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT |\ + HRCWH_TSEC1M_IN_GMII |\ + HRCWH_TSEC2M_IN_GMII ) +#else +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_HOST |\ + HRCWH_32_BIT_PCI |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_PCI2_ARBITER_ENABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0X00000100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT |\ + HRCWH_TSEC1M_IN_GMII |\ + HRCWH_TSEC2M_IN_GMII ) +#endif + +/* System IO Config */ +#define CFG_SICRH SICRH_TSOBI1 +#define CFG_SICRL SICRL_LDP_A + +#define CFG_HID0_INIT 0x000000000 +#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK + +/* #define CFG_HID0_FINAL (\ + HID0_ENABLE_INSTRUCTION_CACHE |\ + HID0_ENABLE_M_BIT |\ + HID0_ENABLE_ADDRESS_BROADCAST ) */ + + +#define CFG_HID2 HID2_HBE + +/* DDR @ 0x00000000 */ +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) + +/* PCI @ 0x80000000 */ +#ifdef CONFIG_PCI +#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT2L (CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT2U (CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#else +#define CFG_IBAT1L (0) +#define CFG_IBAT1U (0) +#define CFG_IBAT2L (0) +#define CFG_IBAT2U (0) +#endif + +#ifdef CONFIG_MPC83XX_PCI2 +#define CFG_IBAT3L (CFG_PCI2_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT3U (CFG_PCI2_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT4L (CFG_PCI2_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT4U (CFG_PCI2_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#else +#define CFG_IBAT3L (0) +#define CFG_IBAT3U (0) +#define CFG_IBAT4L (0) +#define CFG_IBAT4U (0) +#endif + +/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 */ +#define CFG_IBAT5L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT5U (CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP) + +/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ +#define CFG_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CFG_IBAT7L (0) +#define CFG_IBAT7U (0) + +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U +#define CFG_DBAT2L CFG_IBAT2L +#define CFG_DBAT2U CFG_IBAT2U +#define CFG_DBAT3L CFG_IBAT3L +#define CFG_DBAT3U CFG_IBAT3U +#define CFG_DBAT4L CFG_IBAT4L +#define CFG_DBAT4U CFG_IBAT4U +#define CFG_DBAT5L CFG_IBAT5L +#define CFG_DBAT5U CFG_IBAT5U +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ +#define CONFIG_ENV_OVERWRITE + +#if defined(CONFIG_TSEC_ENET) +#define CONFIG_ETHADDR 00:a0:1e:a0:13:8d +#define CONFIG_HAS_ETH1 +#define CONFIG_ETH1ADDR 00:a0:1e:a0:13:8e +#endif + +#define CONFIG_IPADDR 192.168.1.234 + +#define CONFIG_HOSTNAME SBC8349 +#define CONFIG_ROOTPATH /tftpboot/rootfs +#define CONFIG_BOOTFILE uImage + +#define CONFIG_SERVERIP 192.168.1.1 +#define CONFIG_GATEWAYIP 192.168.1.1 +#define CONFIG_NETMASK 255.255.255.0 + +#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ + +#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "hostname=sbc8349\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "load=tftp 100000 /tftpboot/sbc8349/u-boot.bin\0" \ + "update=protect off fff00000 fff3ffff; " \ + "era fff00000 fff3ffff; cp.b 100000 fff00000 ${filesize}\0" \ + "upd=run load;run update\0" \ + "fdtaddr=400000\0" \ + "fdtfile=sbc8349.dtb\0" \ + "" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND "run flash_self" + +#endif /* __CONFIG_H */ |
