diff options
| -rw-r--r-- | common/env_nand.c | 6 | ||||
| -rw-r--r-- | drivers/mtd/nand/nand.c | 4 | ||||
| -rw-r--r-- | drivers/mtd/nand/nand_base.c | 21 |
3 files changed, 27 insertions, 4 deletions
diff --git a/common/env_nand.c b/common/env_nand.c index 8af9e74aac..e490775ecf 100644 --- a/common/env_nand.c +++ b/common/env_nand.c @@ -304,9 +304,11 @@ void env_relocate_spec (void) crc1_ok = (crc32(0, tmp_env1->data, ENV_SIZE) == tmp_env1->crc); crc2_ok = (crc32(0, tmp_env2->data, ENV_SIZE) == tmp_env2->crc); - if(!crc1_ok && !crc2_ok) + if(!crc1_ok && !crc2_ok) { + free(tmp_env1); + free(tmp_env2); return use_default(); - else if(crc1_ok && !crc2_ok) + } else if(crc1_ok && !crc2_ok) gd->env_valid = 1; else if(!crc1_ok && crc2_ok) gd->env_valid = 2; diff --git a/drivers/mtd/nand/nand.c b/drivers/mtd/nand/nand.c index cf9261786d..70b605f9d2 100644 --- a/drivers/mtd/nand/nand.c +++ b/drivers/mtd/nand/nand.c @@ -28,6 +28,8 @@ #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #endif +DECLARE_GLOBAL_DATA_PTR; + int nand_curr_device = -1; nand_info_t nand_info[CONFIG_SYS_MAX_NAND_DEVICE]; @@ -46,6 +48,8 @@ static void nand_init_chip(struct mtd_info *mtd, struct nand_chip *nand, if (nand_scan(mtd, 1) == 0) { if (!mtd->name) mtd->name = (char *)default_nand_name; + else + mtd->name += gd->reloc_off; } else mtd->name = NULL; } else { diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index ef37f97b33..d33fee242f 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -75,6 +75,17 @@ #include <jffs2/jffs2.h> #endif +/* + * CONFIG_SYS_NAND_RESET_CNT is used as a timeout mechanism when resetting + * a flash. NAND flash is initialized prior to interrupts so standard timers + * can't be used. CONFIG_SYS_NAND_RESET_CNT should be set to a value + * which is greater than (max NAND reset time / NAND status read time). + * A conservative default of 200000 (500 us / 25 ns) is used as a default. + */ +#ifndef CONFIG_SYS_NAND_RESET_CNT +#define CONFIG_SYS_NAND_RESET_CNT 200000 +#endif + /* Define default oob placement schemes for large and small page devices */ static struct nand_ecclayout nand_oob_8 = { .eccbytes = 3, @@ -524,6 +535,7 @@ static void nand_command(struct mtd_info *mtd, unsigned int command, { register struct nand_chip *chip = mtd->priv; int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE; + uint32_t rst_sts_cnt = CONFIG_SYS_NAND_RESET_CNT; /* * Write out the command to the device. @@ -590,7 +602,8 @@ static void nand_command(struct mtd_info *mtd, unsigned int command, NAND_CTRL_CLE | NAND_CTRL_CHANGE); chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); - while (!(chip->read_byte(mtd) & NAND_STATUS_READY)) ; + while (!(chip->read_byte(mtd) & NAND_STATUS_READY) && + (rst_sts_cnt--)); return; /* This applies to read commands */ @@ -626,6 +639,7 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command, int column, int page_addr) { register struct nand_chip *chip = mtd->priv; + uint32_t rst_sts_cnt = CONFIG_SYS_NAND_RESET_CNT; /* Emulate NAND_CMD_READOOB */ if (command == NAND_CMD_READOOB) { @@ -696,7 +710,8 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command, NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); - while (!(chip->read_byte(mtd) & NAND_STATUS_READY)) ; + while (!(chip->read_byte(mtd) & NAND_STATUS_READY) && + (rst_sts_cnt--)); return; case NAND_CMD_RNDOUT: @@ -2618,7 +2633,9 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips) type = nand_get_flash_type(mtd, chip, busw, &nand_maf_id); if (IS_ERR(type)) { +#ifndef CONFIG_SYS_NAND_QUIET_TEST printk(KERN_WARNING "No NAND device found!!!\n"); +#endif chip->select_chip(mtd, -1); return PTR_ERR(type); } |
