diff options
| -rw-r--r-- | arch/arm/cpu/armv7/exynos/Kconfig | 6 | ||||
| -rw-r--r-- | arch/arm/dts/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/dts/exynos5250-spring.dts | 588 | ||||
| -rw-r--r-- | board/samsung/smdk5250/Kconfig | 13 | ||||
| -rw-r--r-- | board/samsung/smdk5250/MAINTAINERS | 6 | ||||
| -rw-r--r-- | configs/spring_defconfig | 42 | ||||
| -rw-r--r-- | include/configs/spring.h | 20 |
7 files changed, 676 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv7/exynos/Kconfig b/arch/arm/cpu/armv7/exynos/Kconfig index 4a7d82f74c..37b89b0013 100644 --- a/arch/arm/cpu/armv7/exynos/Kconfig +++ b/arch/arm/cpu/armv7/exynos/Kconfig @@ -51,6 +51,12 @@ config TARGET_SNOW select OF_CONTROL select SPL_DISABLE_OF_CONTROL +config TARGET_SPRING + bool "Spring board" + select SUPPORT_SPL + select OF_CONTROL + select SPL_DISABLE_OF_CONTROL + config TARGET_SMDK5420 bool "SMDK5420 board" select SUPPORT_SPL diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index ba6355379c..2df957cf56 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -9,6 +9,7 @@ dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb \ dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \ exynos5250-snow.dtb \ + exynos5250-spring.dtb \ exynos5250-smdk5250.dtb \ exynos5420-smdk5420.dtb \ exynos5420-peach-pit.dtb \ diff --git a/arch/arm/dts/exynos5250-spring.dts b/arch/arm/dts/exynos5250-spring.dts new file mode 100644 index 0000000000..76d5323dc3 --- /dev/null +++ b/arch/arm/dts/exynos5250-spring.dts @@ -0,0 +1,588 @@ +/* + * Google Spring board device tree source + * + * Copyright (c) 2013 Google, Inc + * Copyright (c) 2014 SUSE LINUX Products GmbH + * + * SPDX-License-Identifier: GPL-2.0 + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> +#include "exynos5250.dtsi" + +/ { + model = "Google Spring"; + compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5"; + + aliases { + i2c0 = "/i2c@12C60000"; + i2c1 = "/i2c@12C70000"; + i2c2 = "/i2c@12C80000"; + i2c3 = "/i2c@12C90000"; + i2c4 = "/i2c@12CA0000"; + i2c5 = "/i2c@12CB0000"; + i2c6 = "/i2c@12CC0000"; + i2c7 = "/i2c@12CD0000"; + i2c104 = &cros_ec_ldo_tunnel; + spi0 = "/spi@12d20000"; + spi1 = "/spi@12d30000"; + spi2 = "/spi@12d40000"; + spi3 = "/spi@131a0000"; + spi4 = "/spi@131b0000"; + mmc0 = "/mmc@12000000"; + serial0 = "/serial@12C30000"; + console = "/serial@12C30000"; + i2s = "/sound@3830000"; + }; + + memory { + reg = <0x40000000 0x80000000>; + }; + + flash@0 { + spl { /* spl size override */ + size = <0x8000>; + }; + }; + + chosen { + bootargs = "console=tty1"; + stdout-path = "serial3:115200n8"; + }; + + board-rev { + compatible = "google,board-revision"; + google,board-rev-gpios = <&gpy4 0 0>, <&gpy4 1 0>, + <&gpy4 2 0>; + }; + + mmc@12200000 { + samsung,bus-width = <8>; + samsung,timing = <1 3 3>; + samsung,removable = <0>; + }; + + mmc@12210000 { + status = "disabled"; + }; + + mmc@12220000 { + /* MMC2 pins are used as GPIO for eDP bridge */ + status = "disabled"; + }; + + mmc@12230000 { + status = "disabled"; + }; + + ehci@12110000 { + samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + xhci@12000000 { + samsung,vbus-gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>; + }; + + spi@12d30000 { + spi-max-frequency = <50000000>; + firmware_storage_spi: flash@0 { + compatible = "spi-flash"; + reg = <0>; + }; + }; + + tmu@10060000 { + samsung,min-temp = <25>; + samsung,max-temp = <125>; + samsung,start-warning = <95>; + samsung,start-tripping = <105>; + samsung,hw-tripping = <110>; + samsung,efuse-min-value = <40>; + samsung,efuse-value = <55>; + samsung,efuse-max-value = <100>; + samsung,slope = <274761730>; + samsung,dc-value = <25>; + }; + + fimd@14400000 { + samsung,vl-freq = <60>; + samsung,vl-col = <1366>; + samsung,vl-row = <768>; + samsung,vl-width = <1366>; + samsung,vl-height = <768>; + + samsung,vl-clkp; + samsung,vl-dp; + samsung,vl-hsp; + samsung,vl-vsp; + + samsung,vl-bpix = <4>; + + samsung,vl-hspw = <32>; + samsung,vl-hbpd = <80>; + samsung,vl-hfpd = <48>; + samsung,vl-vspw = <5>; + samsung,vl-vbpd = <14>; + samsung,vl-vfpd = <3>; + samsung,vl-cmd-allow-len = <0xf>; + + samsung,winid = <0>; + samsung,interface-mode = <1>; + samsung,dp-enabled = <1>; + samsung,dual-lcd-enabled = <0>; + }; + + dp@145b0000 { + samsung,lt-status = <0>; + + samsung,master-mode = <0>; + samsung,bist-mode = <0>; + samsung,bist-pattern = <0>; + samsung,h-sync-polarity = <0>; + samsung,v-sync-polarity = <0>; + samsung,interlaced = <0>; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + }; +}; + +&i2c_0 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + + s5m8767-pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + interrupt-parent = <&gpx3>; + wakeup-source; + + s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */ + <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */ + <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */ + + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */ + <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */ + <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */ + + /* + * The following arrays of DVS voltages are not used, since we are + * not using GPIOs to control PMIC bucks, but they must be defined + * to please the driver. + */ + s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>, + <1250000>, <1200000>, + <1150000>, <1100000>, + <1000000>, <950000>; + + s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>, + <1100000>, <1100000>, + <1000000>, <1000000>, + <1000000>, <1000000>; + + s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + clocks { + compatible = "samsung,s5m8767-clk"; + #clock-cells = <1>; + clock-output-names = "en32khz_ap", + "en32khz_cp", + "en32khz_bt"; + }; + + regulators { + ldo4_reg: LDO4 { + regulator-name = "P1.0V_LDO_OUT4"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <0>; + }; + + ldo5_reg: LDO5 { + regulator-name = "P1.8V_LDO_OUT5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <0>; + }; + + ldo6_reg: LDO6 { + regulator-name = "vdd_mydp"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo7_reg: LDO7 { + regulator-name = "P1.1V_LDO_OUT7"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo8_reg: LDO8 { + regulator-name = "P1.0V_LDO_OUT8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo10_reg: LDO10 { + regulator-name = "P1.8V_LDO_OUT10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo11_reg: LDO11 { + regulator-name = "P1.8V_LDO_OUT11"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <0>; + }; + + ldo12_reg: LDO12 { + regulator-name = "P3.0V_LDO_OUT12"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo13_reg: LDO13 { + regulator-name = "P1.8V_LDO_OUT13"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <0>; + }; + + ldo14_reg: LDO14 { + regulator-name = "P1.8V_LDO_OUT14"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo15_reg: LDO15 { + regulator-name = "P1.0V_LDO_OUT15"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo16_reg: LDO16 { + regulator-name = "P1.8V_LDO_OUT16"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <3>; + }; + + ldo17_reg: LDO17 { + regulator-name = "P1.2V_LDO_OUT17"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + op_mode = <0>; + }; + + ldo25_reg: LDO25 { + regulator-name = "vdd_bridge"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + op_mode = <1>; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + op_mode = <3>; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + op_mode = <3>; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <3>; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + op_mode = <3>; + }; + + buck5_reg: BUCK5 { + regulator-name = "P1.8V_BUCK_OUT5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck6_reg: BUCK6 { + regulator-name = "P1.2V_BUCK_OUT6"; + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + regulator-always-on; + regulator-boot-on; + op_mode = <0>; + }; + + buck9_reg: BUCK9 { + regulator-name = "vdd_ummc"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <3>; + }; + }; + }; +}; + +&i2c_1 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; +}; + +&i2c_2 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_3 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_4 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + clock-frequency = <66000>; + + cros_ec: embedded-controller { + compatible = "google,cros-ec-i2c"; + reg = <0x1e>; + interrupts = <6 IRQ_TYPE_NONE>; + interrupt-parent = <&gpx1>; + wakeup-source; + u-boot,i2c-offset-len = <0>; + ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>; + cros_ec_ldo_tunnel: cros-ec-ldo-tunnel { + compatible = "google,cros-ec-ldo-tunnel"; + #address-cells = <1>; + #size-cells = <0>; + power-regulator { + compatible = "ti,tps65090"; + reg = <0x48>; + + regulators { + dcdc1 { + ti,enable-ext-control; + }; + dcdc2 { + ti,enable-ext-control; + }; + dcdc3 { + ti,enable-ext-control; + }; + fet1: fet1 { + regulator-name = "vcd_led"; + ti,overcurrent-wait = <3>; + }; + tps65090_fet2: fet2 { + regulator-name = "video_mid"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + fet3 { + regulator-name = "wwan_r"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + fet4 { + regulator-name = "sdcard"; + ti,overcurrent-wait = <3>; + }; + fet5 { + regulator-name = "camout"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + fet6: fet6 { + regulator-name = "lcd_vdd"; + ti,overcurrent-wait = <3>; + }; + tps65090_fet7: fet7 { + regulator-name = "video_mid_1a"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + ldo1 { + }; + ldo2 { + }; + }; + }; + }; + }; +}; + +&i2c_5 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_7 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + + ps8622-bridge@8 { + compatible = "parade,ps8622"; + reg = <0x8>; + sleep-gpios = <&gpc3 6 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpc3 1 GPIO_ACTIVE_LOW>; + hotplug-gpios = <&gpc3 0 GPIO_ACTIVE_HIGH>; + power-supply = <&ldo6_reg>; + parade,regs = /bits/ 8 < + 0x02 0xa1 0x01 /* HPD low */ + /* + * SW setting: [1:0] SW output 1.2V voltage is + * lower to 96% + */ + 0x04 0x14 0x01 + /* RCO SS setting: [5:4] = b01 0.5%, b10 1%, b11 1.5% */ + 0x04 0xe3 0x20 + 0x04 0xe2 0x80 /* [7] RCO SS enable */ + /* + * RPHY Setting: [3:2] CDR tune wait cycle before + * measure for fine tune b00: 1us, + * 01: 0.5us, 10:2us, 11:4us + */ + 0x04 0x8a 0x0c + 0x04 0x89 0x08 /* [3] RFD always on */ + /* + * CTN lock in/out: 20000ppm/80000ppm. Lock out 2 times + */ + 0x04 0x71 0x2d + /* 2.7G CDR settings */ + 0x04 0x7d 0x07 /* NOF=40LSB for HBR CDR setting */ + 0x04 0x7b 0x00 /* [1:0] Fmin=+4bands */ + 0x04 0x7a 0xfd /* [7:5] DCO_FTRNG=+-40% */ + /* + * 1.62G CDR settings: + * [5:2]NOF=64LSB [1:0]DCO scale is 2/5 + */ + 0x04 0xc0 0x12 + 0x04 0xc1 0x92 /* Gitune=-37% */ + 0x04 0xc2 0x1c /* Fbstep=100% */ + 0x04 0x32 0x80 /* [7] LOS signal disable */ + /* RPIO Setting */ + /* [7:4] LVDS driver bias current 75% (250mV swing) */ + 0x04 0x00 0xb0 + /* [7:6] Right-bar GPIO output strength is 8mA */ + 0x04 0x15 0x40 + /* EQ Training State Machine Setting */ + 0x04 0x54 0x10 /* RCO calibration start */ + /* [4:0] MAX_LANE_COUNT set to one lane */ + 0x01 0x02 0x81 + /* [4:0] LANE_COUNT_SET set to one lane */ + 0x01 0x21 0x81 + 0x00 0x52 0x20 + 0x00 0xf1 0x03 /* HPD CP toggle enable */ + 0x00 0x62 0x41 + /* Counter number add 1ms counter delay */ + 0x00 0xf6 0x01 + /* + * [6]PWM function control by DPCD0040f[7], default + * is PWM block always works + */ + 0x00 0x77 0x06 + 0x00 0x4c 0x04 + /* + * 04h Adjust VTotal tolerance to fix the 30Hz no- + * display issue + * DPCD00400='h00 Parade OUI = 'h001cf8 + */ + 0x01 0xc0 0x00 + 0x01 0xc1 0x1c /* DPCD00401='h1c */ + 0x01 0xc2 0xf8 /* DPCD00402='hf8 */ + /* DPCD403~408 = ASCII code D2SLV5='h4432534c5635 */ + 0x01 0xc3 0x44 + 0x01 0xc4 0x32 /* DPCD404 */ + 0x01 0xc5 0x53 /* DPCD405 */ + 0x01 0xc6 0x4c /* DPCD406 */ + 0x01 0xc7 0x56 /* DPCD407 */ + 0x01 0xc8 0x35 /* DPCD408 */ + /* DPCD40A Initial Code major revision '01' */ + 0x01 0xca 0x01 + /* DPCD40B Initial Code minor revision '05' */ + 0x01 0xcb 0x05 + 0x01 0xa5 0xa0 /* DPCD720, Select internal PWM */ + /* + * 0xff for 100% PWM of brightness, 0h for 0% brightness + */ + 0x01 0xa7 0x00 + /* + * Set LVDS output as 6bit-VESA mapping, single LVDS + * channel + */ + 0x01 0xcc 0x13 + 0x02 0xb1 0x20 /* Enable SSC set by register */ + /* Set SSC enabled and +/-1% central spreading */ + 0x04 0x10 0x16 + 0x04 0x59 0x60 /* MPU Clock source: LC => RCO */ + 0x04 0x54 0x14 /* LC -> RCO */ + 0x02 0xa1 0x91>; /* HPD high */ + }; + + soundcodec@20 { + reg = <0x20>; + compatible = "maxim,max98088-codec"; + }; +}; + +#include "cros-ec-keyboard.dtsi" diff --git a/board/samsung/smdk5250/Kconfig b/board/samsung/smdk5250/Kconfig index 698ee9125c..11ffaee5ce 100644 --- a/board/samsung/smdk5250/Kconfig +++ b/board/samsung/smdk5250/Kconfig @@ -23,3 +23,16 @@ config SYS_CONFIG_NAME default "snow" endif + +if TARGET_SPRING + +config SYS_BOARD + default "smdk5250" + +config SYS_VENDOR + default "samsung" + +config SYS_CONFIG_NAME + default "spring" + +endif diff --git a/board/samsung/smdk5250/MAINTAINERS b/board/samsung/smdk5250/MAINTAINERS index 070593e266..cde966fdbf 100644 --- a/board/samsung/smdk5250/MAINTAINERS +++ b/board/samsung/smdk5250/MAINTAINERS @@ -10,3 +10,9 @@ M: Akshay Saraswat <akshay.s@samsung.com> S: Maintained F: include/configs/snow.h F: configs/snow_defconfig + +SPRING BOARD +M: Simon Glass <sjg@chromium.org> +S: Maintained +F: include/configs/spring.h +F: configs/spring_defconfig diff --git a/configs/spring_defconfig b/configs/spring_defconfig new file mode 100644 index 0000000000..a3abb35470 --- /dev/null +++ b/configs/spring_defconfig @@ -0,0 +1,42 @@ +CONFIG_ARM=y +CONFIG_ARCH_EXYNOS=y +CONFIG_TARGET_SPRING=y +CONFIG_DEFAULT_DEVICE_TREE="exynos5250-spring" +CONFIG_SPL=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_SOUND=y +CONFIG_SPI_FLASH=y +CONFIG_CMD_CROS_EC=y +CONFIG_CROS_EC=y +CONFIG_CROS_EC_I2C=y +CONFIG_CROS_EC_KEYB=y +CONFIG_SOUND=y +CONFIG_I2S=y +CONFIG_I2S_SAMSUNG=y +CONFIG_SOUND_MAX98095=y +CONFIG_SOUND_WM8994=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_DM_I2C=y +CONFIG_DM_PMIC=y +CONFIG_DM_REGULATOR=y +CONFIG_PMIC_TPS65090=y +CONFIG_REGULATOR_TPS65090=y +CONFIG_DM_I2C_COMPAT=y +CONFIG_I2C_ARB_GPIO_CHALLENGE=y +CONFIG_I2C_MUX=y +CONFIG_CMD_PMIC=y +CONFIG_CMD_REGULATOR=y +CONFIG_ERRNO_STR=y +CONFIG_DM_PMIC_MAX77686=y +CONFIG_DM_REGULATOR_MAX77686=y +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_S5P=y +CONFIG_DEBUG_UART_CLOCK=100000000 +CONFIG_DEBUG_UART_BASE=0x12c30000 +CONFIG_I2C_CROS_EC_LDO=y +CONFIG_PMIC_S5M8767=y +CONFIG_REGULATOR_S5M8767=y +CONFIG_VIDEO_BRIDGE=y +CONFIG_VIDEO_BRIDGE_PARADE_PS862X=y diff --git a/include/configs/spring.h b/include/configs/spring.h new file mode 100644 index 0000000000..a692dfd7ec --- /dev/null +++ b/include/configs/spring.h @@ -0,0 +1,20 @@ +/* + * Copyright (c) 2015 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_SPRING_H +#define __CONFIG_SPRING_H + +#include <configs/exynos5250-common.h> +#include <configs/exynos5-dt-common.h> +#include <configs/exynos5-common.h> + +#define CONFIG_BOARD_COMMON + +#define CONFIG_SYS_PROMPT "spring # " +#define CONFIG_IDENT_STRING " for spring" +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" + +#endif /* __CONFIG_SPRING_H */ |
