summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/mtd/nand/omap_gpmc.c58
1 files changed, 26 insertions, 32 deletions
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
index 1972b0ecae..391a26858c 100644
--- a/drivers/mtd/nand/omap_gpmc.c
+++ b/drivers/mtd/nand/omap_gpmc.c
@@ -148,9 +148,9 @@ static int __maybe_unused omap_correct_data(struct mtd_info *mtd, uint8_t *dat,
}
/*
- * Generic BCH interface
+ * Driver configurations
*/
-struct nand_bch_priv {
+struct omap_nand_info {
struct bch_control *control;
enum omap_ecc ecc_scheme;
};
@@ -161,7 +161,7 @@ struct nand_bch_priv {
* library).
* When some users with other BCH strength will exists this have to change!
*/
-static __maybe_unused struct nand_bch_priv bch_priv = {
+static __maybe_unused struct omap_nand_info omap_nand_info = {
.control = NULL
};
@@ -191,7 +191,7 @@ __maybe_unused
static void omap_enable_hwecc(struct mtd_info *mtd, int32_t mode)
{
struct nand_chip *nand = mtd->priv;
- struct nand_bch_priv *bch = nand->priv;
+ struct omap_nand_info *info = nand->priv;
unsigned int dev_width = (nand->options & NAND_BUSWIDTH_16) ? 1 : 0;
unsigned int ecc_algo = 0;
unsigned int bch_type = 0;
@@ -200,7 +200,7 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int32_t mode)
u32 ecc_config_val = 0;
/* configure GPMC for specific ecc-scheme */
- switch (bch->ecc_scheme) {
+ switch (info->ecc_scheme) {
case OMAP_ECC_HAM1_CODE_SW:
return;
case OMAP_ECC_HAM1_CODE_HW:
@@ -262,11 +262,11 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat,
uint8_t *ecc_code)
{
struct nand_chip *chip = mtd->priv;
- struct nand_bch_priv *bch = chip->priv;
+ struct omap_nand_info *info = chip->priv;
uint32_t *ptr, val = 0;
int8_t i = 0, j;
- switch (bch->ecc_scheme) {
+ switch (info->ecc_scheme) {
case OMAP_ECC_HAM1_CODE_HW:
val = readl(&gpmc_cfg->ecc1_result);
ecc_code[0] = val & 0xFF;
@@ -294,7 +294,7 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat,
return -EINVAL;
}
/* ECC scheme specific syndrome customizations */
- switch (bch->ecc_scheme) {
+ switch (info->ecc_scheme) {
case OMAP_ECC_HAM1_CODE_HW:
break;
#ifdef CONFIG_BCH
@@ -330,7 +330,7 @@ static int omap_correct_data_bch(struct mtd_info *mtd, uint8_t *dat,
uint8_t *read_ecc, uint8_t *calc_ecc)
{
struct nand_chip *chip = mtd->priv;
- struct nand_bch_priv *bch = chip->priv;
+ struct omap_nand_info *info = chip->priv;
uint32_t eccbytes = chip->ecc.bytes;
uint32_t error_count = 0, error_max;
uint32_t error_loc[8];
@@ -360,7 +360,7 @@ static int omap_correct_data_bch(struct mtd_info *mtd, uint8_t *dat,
* while reading ECC result we read it in big endian.
* Hence while loading to ELM we have rotate to get the right endian.
*/
- switch (bch->ecc_scheme) {
+ switch (info->ecc_scheme) {
case OMAP_ECC_BCH8_CODE_HW:
bch_type = BCH_8_BIT;
omap_reverse_list(calc_ecc, eccbytes - 1);
@@ -376,7 +376,7 @@ static int omap_correct_data_bch(struct mtd_info *mtd, uint8_t *dat,
}
/* correct bch error */
for (count = 0; count < error_count; count++) {
- switch (bch->ecc_scheme) {
+ switch (info->ecc_scheme) {
case OMAP_ECC_BCH8_CODE_HW:
/* 14th byte in ECC is reserved to match ROM layout */
error_max = SECTOR_BYTES + (eccbytes - 1);
@@ -483,10 +483,10 @@ static int omap_correct_data_bch_sw(struct mtd_info *mtd, u_char *data,
/* cannot correct more than 8 errors */
unsigned int errloc[8];
struct nand_chip *chip = mtd->priv;
- struct nand_bch_priv *chip_priv = chip->priv;
- struct bch_control *bch = chip_priv->control;
+ struct omap_nand_info *info = chip->priv;
- count = decode_bch(bch, NULL, 512, read_ecc, calc_ecc, NULL, errloc);
+ count = decode_bch(info->control, NULL, 512, read_ecc, calc_ecc,
+ NULL, errloc);
if (count > 0) {
/* correct errors */
for (i = 0; i < count; i++) {
@@ -522,15 +522,11 @@ static int omap_correct_data_bch_sw(struct mtd_info *mtd, u_char *data,
static void __maybe_unused omap_free_bch(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
- struct nand_bch_priv *chip_priv = chip->priv;
- struct bch_control *bch = NULL;
+ struct omap_nand_info *info = chip->priv;
- if (chip_priv)
- bch = chip_priv->control;
-
- if (bch) {
- free_bch(bch);
- chip_priv->control = NULL;
+ if (info->control) {
+ free_bch(info->control);
+ info->control = NULL;
}
}
#endif /* CONFIG_BCH */
@@ -544,7 +540,7 @@ static void __maybe_unused omap_free_bch(struct mtd_info *mtd)
*/
static int omap_select_ecc_scheme(struct nand_chip *nand,
enum omap_ecc ecc_scheme, unsigned int pagesize, unsigned int oobsize) {
- struct nand_bch_priv *bch = nand->priv;
+ struct omap_nand_info *info = nand->priv;
struct nand_ecclayout *ecclayout = &omap_ecclayout;
int eccsteps = pagesize / SECTOR_BYTES;
int i;
@@ -554,11 +550,10 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
debug("nand: selected OMAP_ECC_HAM1_CODE_SW\n");
/* For this ecc-scheme, ecc.bytes, ecc.layout, ... are
* initialized in nand_scan_tail(), so just set ecc.mode */
- bch_priv.control = NULL;
+ info->control = NULL;
nand->ecc.mode = NAND_ECC_SOFT;
nand->ecc.layout = NULL;
nand->ecc.size = 0;
- bch->ecc_scheme = OMAP_ECC_HAM1_CODE_SW;
break;
case OMAP_ECC_HAM1_CODE_HW:
@@ -569,7 +564,7 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
(3 * eccsteps) + BADBLOCK_MARKER_LENGTH));
return -EINVAL;
}
- bch_priv.control = NULL;
+ info->control = NULL;
/* populate ecc specific fields */
memset(&nand->ecc, 0, sizeof(struct nand_ecc_ctrl));
nand->ecc.mode = NAND_ECC_HW;
@@ -590,7 +585,6 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH;
ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes -
BADBLOCK_MARKER_LENGTH;
- bch->ecc_scheme = OMAP_ECC_HAM1_CODE_HW;
break;
case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
@@ -603,8 +597,8 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
return -EINVAL;
}
/* check if BCH S/W library can be used for error detection */
- bch_priv.control = init_bch(13, 8, 0x201b);
- if (!bch_priv.control) {
+ info->control = init_bch(13, 8, 0x201b);
+ if (!info->control) {
printf("nand: error: could not init_bch()\n");
return -ENODEV;
}
@@ -631,7 +625,6 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH;
ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes -
BADBLOCK_MARKER_LENGTH;
- bch->ecc_scheme = OMAP_ECC_BCH8_CODE_HW_DETECTION_SW;
break;
#else
printf("nand: error: CONFIG_BCH required for ECC\n");
@@ -649,6 +642,7 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
}
/* intialize ELM for ECC error detection */
elm_init();
+ info->control = NULL;
/* populate ecc specific fields */
memset(&nand->ecc, 0, sizeof(struct nand_ecc_ctrl));
nand->ecc.mode = NAND_ECC_HW;
@@ -666,7 +660,6 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH;
ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes -
BADBLOCK_MARKER_LENGTH;
- bch->ecc_scheme = OMAP_ECC_BCH8_CODE_HW;
break;
#else
printf("nand: error: CONFIG_NAND_OMAP_ELM required for ECC\n");
@@ -682,6 +675,7 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
if (ecc_scheme != OMAP_ECC_HAM1_CODE_SW)
nand->ecc.layout = ecclayout;
+ info->ecc_scheme = ecc_scheme;
return 0;
}
@@ -785,7 +779,7 @@ int board_nand_init(struct nand_chip *nand)
nand->IO_ADDR_R = (void __iomem *)&gpmc_cfg->cs[cs].nand_dat;
nand->IO_ADDR_W = (void __iomem *)&gpmc_cfg->cs[cs].nand_cmd;
- nand->priv = &bch_priv;
+ nand->priv = &omap_nand_info;
nand->cmd_ctrl = omap_nand_hwcontrol;
nand->options |= NAND_NO_PADDING | NAND_CACHEPRG;
/* If we are 16 bit dev, our gpmc config tells us that */
OpenPOWER on IntegriCloud