summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--CHANGELOG309
-rwxr-xr-xMAKEALL2
-rw-r--r--Makefile40
-rw-r--r--board/amcc/sequoia/cmd_sequoia.c8
-rw-r--r--board/cds/common/ft_board.c23
-rw-r--r--board/dbau1x00/u-boot.lds14
-rw-r--r--board/freescale/common/pq-mds-pib.c26
-rw-r--r--board/freescale/m54455evb/config.mk4
-rw-r--r--board/gth2/u-boot.lds14
-rw-r--r--board/incaip/u-boot.lds14
-rw-r--r--board/innokom/innokom.c2
-rw-r--r--board/m5282evb/m5282evb.c1
-rw-r--r--board/motionpro/motionpro.c6
-rw-r--r--board/pb1x00/u-boot.lds14
-rw-r--r--board/purple/u-boot.lds14
-rw-r--r--board/pxa255_idp/Makefile2
-rw-r--r--board/pxa255_idp/config.mk2
-rw-r--r--board/pxa255_idp/lowlevel_init.S (renamed from board/pxa255_idp/memsetup.S)10
-rw-r--r--board/pxa255_idp/u-boot.lds1
-rw-r--r--board/tb0229/u-boot.lds14
-rw-r--r--board/tqm5200/cmd_stk52xx.c17
-rw-r--r--board/tqm5200/tqm5200.c2
-rw-r--r--board/tqm8xx/tqm8xx.c16
-rw-r--r--board/xsengine/flash.c4
-rw-r--r--common/cmd_bootm.c2
-rw-r--r--common/cmd_dtt.c2
-rw-r--r--cpu/arm920t/at91rm9200/usb.c8
-rw-r--r--cpu/mcf52x2/start.S6
-rw-r--r--cpu/mcf532x/start.S4
-rw-r--r--cpu/mips/config.mk2
-rw-r--r--cpu/mips/start.S19
-rw-r--r--cpu/mpc85xx/cpu.c7
-rw-r--r--cpu/mpc85xx/start.S24
-rw-r--r--cpu/pxa/config.mk3
-rw-r--r--cpu/pxa/serial.c72
-rw-r--r--cpu/pxa/start.S6
-rw-r--r--cpu/pxa/usb.c7
-rwxr-xr-xdrivers/Makefile31
-rw-r--r--drivers/ds1722.c4
-rw-r--r--drivers/fsl_pci_init.c8
-rw-r--r--drivers/mw_eeprom.c4
-rw-r--r--drivers/ne2000.c38
-rw-r--r--drivers/ne2000.h2
-rw-r--r--drivers/serial/Makefile2
-rw-r--r--drivers/serial/serial_pl010.c (renamed from drivers/serial_pl010.c)0
-rw-r--r--drivers/serial/serial_pl011.c (renamed from drivers/serial_pl011.c)0
-rw-r--r--drivers/serial/serial_pl011.h (renamed from drivers/serial_pl011.h)0
-rw-r--r--drivers/tsec.c1
-rw-r--r--examples/mips.lds14
-rw-r--r--include/asm-mips/addrspace.h2
-rw-r--r--include/asm-mips/string.h10
-rw-r--r--include/configs/M5253EVBE.h2
-rw-r--r--include/configs/M5282EVB.h2
-rw-r--r--include/configs/M5329EVB.h2
-rw-r--r--include/configs/M54455EVB.h36
-rw-r--r--include/configs/MPC8266ADS.h51
-rw-r--r--include/configs/MPC8541CDS.h1
-rw-r--r--include/configs/MPC8548CDS.h1
-rw-r--r--include/configs/MPC8555CDS.h1
-rw-r--r--include/configs/MPC8568MDS.h2
-rw-r--r--include/configs/TQM5200.h6
-rw-r--r--include/configs/TQM860M.h13
-rw-r--r--include/configs/TQM866M.h49
-rw-r--r--include/configs/atstk1002.h11
-rw-r--r--include/configs/delta.h2
-rw-r--r--include/configs/lubbock.h1
-rw-r--r--include/configs/motionpro.h29
-rw-r--r--include/configs/pxa255_idp.h13
-rw-r--r--include/configs/xsengine.h1
-rw-r--r--include/part.h6
-rw-r--r--lib_m68k/m68k_linux.c3
-rw-r--r--mips_config.mk25
-rw-r--r--net/bootp.c11
73 files changed, 760 insertions, 345 deletions
diff --git a/CHANGELOG b/CHANGELOG
index b038749c9b..549c4f919c 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,3 +1,267 @@
+commit 58b74b05c621e2835ecf4e2d3243042cf4186777
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Oct 19 00:09:05 2007 +0200
+
+ Fix missing drivers makefile entries ds1722.c mw_eeprom.c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 96455bfebc9887837095c9051d216f53c61b5f10
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Oct 19 00:07:39 2007 +0200
+
+ Fix warning differ in signedness in board/innokom/innokom.c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2a4741d9a14ec475f50e9856d2c0a67e8b4271bd
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Fri Oct 19 00:25:33 2007 +0200
+
+ fix pxa255_idp board
+
+ The pxa255_idp being an old unmaintained board showed several issues:
+ 1. CONFIG_INIT_CRITICAL was still defined.
+ 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined.
+ 3. Symbol flash_addr was undeclared.
+ 4. The boards lowlevel_init function was still called memsetup.
+ 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000.
+ 6. Using -march=armv5 instead of -march=armv5te resulted in lots of
+ 'target CPU does not support interworking' warnings on recent compilers.
+ 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as
+ indexes rather than the register definitions from the pxa-regs header
+ file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to
+ avoid any ambiguities.
+ 8. There were several redefinition warnings concerning ICMR, OSMR3,
+ OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file.
+ 9. The board configuration file was rather outdated.
+ 10. The part header file defined the vendor, product and revision arrays
+ as unsigned chars instead of just chars in the block_dev_desc_t
+ structure.
+
+ Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
+
+commit 298cd4cafe81ff8a6c87be8fbc440a20720d3ed6
+Author: Rune Torgersen <runet@innovsys.com>
+Date: Wed Oct 17 11:56:31 2007 -0500
+
+ Make MPC8266ADS command selection more robust
+
+ Fix MPC8266 command line definition so it won't break when new commands
+ are added to u-boot.
+ Signed-off-by Rune Torgersen <runet@innovsys.com>
+
+commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Oct 21 01:01:17 2007 +0200
+
+ Minor coding style cleanup; update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c
+Author: Vlad Lungu <vlad@comsys.ro>
+Date: Thu Oct 4 20:47:10 2007 +0300
+
+ Fix NE2000 driver:
+
+ Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try
+ to do anything in eth_stop() if eth_init() was not called.
+ Simplified RX path in order to avoid timeouts on really really
+ fast NE2000 cards (read: qemu with internal tftp), NetLoop() is
+ clever enough to cope with 1 packet per eth_rx().
+
+ Signed-off-by: Vlad Lungu <vlad@comsys.ro>
+
+commit 5441f61a3d8b7034f19fc1361183e936198e6dbb
+Author: Detlev Zundel <dzu@denx.de>
+Date: Fri Oct 19 16:47:26 2007 +0200
+
+ Fix two typos.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 281df457c1aa50d2752165d0c5c3282d4027b974
+Author: Tony Li <tony.li@freescale.com>
+Date: Thu Oct 18 17:47:19 2007 +0800
+
+ mpc83xx: Add configure entry for MPC83xx ATM support
+
+ Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into
+ Makfile and MAKEALL
+
+ Signed-off-by: Tony Li <tony.li@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit d2646554f529a9577515eceb0ec5eceee18244ba
+Author: Tony Li <tony.li@freescale.com>
+Date: Thu Oct 18 17:44:38 2007 +0800
+
+ mpc83xx: pq-mds-pib.c typo error
+
+ Correct to val8 from val.
+
+ Signed-off-by: Tony Li <tony.li@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 3e11ae80fec1ee12194940955431186abf6009c2
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 17 15:40:19 2007 +0200
+
+ ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd
+Author: runet@innovsys.com <runet@innovsys.com>
+Date: Tue Oct 16 14:50:40 2007 -0500
+
+ Make MPC8266ADS board compile again.
+
+ Signed-off-by: Runet Torgersen <runet@innovsys.com>
+
+commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Aug 27 12:41:03 2007 -0500
+
+ 86xx: Allow for fewer DDR slots per memory controller.
+
+ As a direct correlation exists between DDR DIMM slots
+ and SPD EEPROM addresses used to configure them, use
+ the individually defined SPD_EEPROM_ADDRESS* values to
+ determine if a DDR DIMM slot should have its SPD
+ configuration read or not.
+
+ Effectively, this now allows for 1 or 2 DIMM slots
+ per memory controller.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 4d4a945e189a2f384c66432316da2788a0ac1607
+Author: Rodolfo Giometti <giometti@enneenne.com>
+Date: Mon Oct 15 11:59:17 2007 +0200
+
+ PXA USB OHCI: "usb stop" implementation.
+
+ Some USB keys need to be switched off before loading the kernel
+ otherwise they can remain in an undefined status which prevents them
+ to be correctly recognized by the kernel.
+
+ Signed-off-by: Rodolfo Giometti <giometti@linux.it>
+
+commit e2e93442e558cf1500e92861f99713b2f045ea22
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 15 11:39:00 2007 +0200
+
+ ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier
+
+ The I2C bootstrap values that can be setup via the "bootstrap" command,
+ were setup incorrect regarding the generation of the internal sync PCI
+ clock. The values for PLB clock == 133MHz were slighly incorrect and the
+ values for PLB clock == 166MHz were totally incorrect. This could
+ lead to a hangup upon booting while PCI configuration scan.
+
+ This patch fixes this issue and configures valid PCI divisor values
+ for the sync PCI clock, with respect to the provided external async
+ PCI frequency.
+
+ Here the values of the formula in the chapter 14.2 "PCI clocking"
+ from the 440EPx users manual:
+
+ AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz
+
+ 33MHz async PCI frequency:
+ PLB = 133:
+ => 32 <= 44.3 <= 65 (div = 3)
+
+ PLB = 166:
+ => 32 <= 55.3 <= 65 (div = 3)
+
+ 66MHz async PCI frequency:
+ PLB = 133:
+ => 65 <= 66.5 <= 132 (div = 2)
+
+ PLB = 166:
+ => 65 <= 83 <= 132 (div = 2)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 15 11:29:33 2007 +0200
+
+ ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
+
+ The BCSR status bit for the 66MHz PCI operation was correctly
+ addressed (MSB/LSB problem). Now the correct currently setup
+ PCI frequency is displayed upon bootup.
+
+ This patch also fixes this problem on Rainier & Yellowstone, since these
+ boards use the same souce code as Sequoia & Yosemite do.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit da3aad55cbde80ab6e301aafa82a2c411aa53eff
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Wed Sep 26 17:55:56 2007 +0200
+
+ TQM860M: adjust for doubled flash sector size.
+
+ Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
+ doubled sector size.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d
+Author: Jens Gehrlein <jens.gehrlein@tqs.de>
+Date: Wed Sep 26 17:55:54 2007 +0200
+
+ TQM8xx: Fix CAN timing.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit d43e489baf02afae49077791fb22332d240d8656
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Thu Sep 27 14:54:36 2007 +0200
+
+ TQM866M: fix SDRAM refresh
+
+ At 133 MHz the current SDRAM refresh rate is too fast
+ (measured 4 * 1.17 us).
+ CFG_MAMR_PTA changes from 39 to 97. This result
+ in a refresh rate of 4 * 7.8 us at the default clock
+ 50 MHz. At 133 MHz the value will be then 4 * 2.9 us.
+ This is a compromise until a new method is found to
+ adjust the refresh rate.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 9ef57bbee1c67cc01da2026c242c4692db32be36
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Wed Sep 26 17:55:55 2007 +0200
+
+ TQM866M: adjust for doubled flash sector size.
+
+ Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
+ doubled sector size.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sun Oct 14 16:12:29 2007 +0200
+
+ [FIX] XUPV2P change command handling
+ and remove code violation
+
+commit 636400198228d96983c06657b17f760f5989958e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Oct 14 00:13:19 2007 +0200
+
+ Prepare for 1.3.0-rc3 release
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit 68f14f77ca5fe5f9cc025c8cae101671f628309f
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Sat Sep 29 13:41:37 2007 +0200
@@ -109,6 +373,26 @@ Date: Mon Oct 1 09:51:50 2007 +0200
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818
+Author: Timo Ketola <timo.ketola@exertus.fi>
+Date: Mon Sep 24 14:50:32 2007 +0300
+
+ Bugfix: Use only one PTD for one endpoint
+
+ Original isp116x-hcd code prepared multiple PTDs for longer than 16
+ byte transfers for one endpoint. That is unnecessary because the
+ ISP116x is able to split long data from one PTD into multiple
+ transactions based on the buffer size of the endpoint. It also caused
+ serious problems if the endpoint NAKed some of the transactions. In
+ that case ISP116x wouldn't notice that the other PTDs were for the same
+ endpoint and would try the other PTDs possibly out of order. That would
+ break the whole transfer.
+
+ This patch makes isp116x_submit_job to use one PTD for one transfer.
+
+ Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
commit 86ec86c04326c3913178a7679aa910de071da75d
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Thu Sep 27 23:27:47 2007 +0200
@@ -331,6 +615,12 @@ Date: Mon Sep 10 17:13:49 2007 +0900
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sun Sep 16 20:51:57 2007 +0200
+
+ [FIX] remove files form repository
+
commit 67c31036acaaaa992fc346cc89db0909a7e733c4
Author: Wolfgang Denk <wd@denx.de>
Date: Sun Sep 16 17:10:04 2007 +0200
@@ -478,6 +768,25 @@ Date: Sat Sep 15 11:55:42 2007 +0200
[1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805
+commit 991b089d1ce5ad945725e3657a8f106dfa02a38e
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sat Sep 15 00:03:35 2007 +0200
+
+ Synchronize with U-BOOT mainline
+
+commit d7fee32b7e61fe11c64e371cde79faa4768e8350
+Author: Sam Sparks <SSparks@twacs.com>
+Date: Fri Sep 14 11:14:42 2007 -0600
+
+ Update MPC8349ITX*_config to place config.tmp in right place.
+
+ MPC834ITX*_config does not store config.tmp at the correct locatation,
+ causing MPC8349ITXGP to have the wrong TEXT_BASE.
+
+ Signed-off-by: Sam Sparks <SSparks@twacs.com>
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c
Author: Bartlomiej Sieka <tur@semihalf.com>
Date: Thu Sep 13 18:21:48 2007 +0200
diff --git a/MAKEALL b/MAKEALL
index 9769c168ac..218cb40ed4 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -301,10 +301,12 @@ LIST_83xx=" \
MPC8313ERDB_66 \
MPC8323ERDB \
MPC832XEMDS \
+ MPC832XEMDS_ATM \
MPC8349EMDS \
MPC8349ITX \
MPC8349ITXGP \
MPC8360EMDS \
+ MPC8360EMDS_ATM \
sbc8349 \
TQM834x \
"
diff --git a/Makefile b/Makefile
index f344487923..97ff5d6d8e 100644
--- a/Makefile
+++ b/Makefile
@@ -393,7 +393,7 @@ BC3450_config: unconfig
cpci5200_config: unconfig
@$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd
-hmi1001_config: unconfig
+hmi1001_config: unconfig
@$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001
Lite5200_config \
@@ -435,7 +435,7 @@ icecube_5100_config: unconfig
}
@$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
-jupiter_config: unconfig
+jupiter_config: unconfig
@$(MKCONFIG) jupiter ppc mpc5xxx jupiter
v38b_config: unconfig
@@ -640,9 +640,9 @@ TQM5200_STK100_config: unconfig
{ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
}
@$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200
-uc101_config: unconfig
+uc101_config: unconfig
@$(MKCONFIG) uc101 ppc mpc5xxx uc101
-motionpro_config: unconfig
+motionpro_config: unconfig
@$(MKCONFIG) motionpro ppc mpc5xxx motionpro
@@ -930,7 +930,7 @@ RPXlite_DW_NVRAM_config \
RPXlite_DW_NVRAM_64_config \
RPXlite_DW_NVRAM_LCD_config \
RPXlite_DW_NVRAM_64_LCD_config \
-RPXlite_DW_config: unconfig
+RPXlite_DW_config: unconfig
@mkdir -p $(obj)include
@ >$(obj)include/config.h
@[ -z "$(findstring _64,$@)" ] || \
@@ -1733,9 +1733,13 @@ M54455EVB_i66_config : unconfig
>include/config.h ; \
if [ "$${FLASH}" == "INTEL" ] ; then \
echo "#undef CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \
+ echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
+ cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
echo "... with INTEL boot..." ; \
else \
echo "#define CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \
+ echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
+ cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
echo "... with ATMEL boot..." ; \
fi; \
echo "#define CFG_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
@@ -1766,7 +1770,8 @@ MPC8323ERDB_config: unconfig
MPC832XEMDS_config \
MPC832XEMDS_HOST_33_config \
MPC832XEMDS_HOST_66_config \
-MPC832XEMDS_SLAVE_config: unconfig
+MPC832XEMDS_SLAVE_config \
+MPC832XEMDS_ATM_config: unconfig
@mkdir -p $(obj)include
@echo "" >$(obj)include/config.h ; \
if [ "$(findstring _HOST_,$@)" ] ; then \
@@ -1781,10 +1786,17 @@ MPC832XEMDS_SLAVE_config: unconfig
if [ "$(findstring _33_,$@)" ] ; then \
echo -n "...33M ..." ; \
echo "#define PCI_33M" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
echo -n "...66M..." ; \
echo "#define PCI_66M" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+ fi ; \
+ if [ "$(findstring _ATM_,$@)" ] ; then \
+ echo -n "...ATM..." ; \
+ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \
fi ;
@$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale
@@ -1808,7 +1820,8 @@ MPC8349ITXGP_config: unconfig
MPC8360EMDS_config \
MPC8360EMDS_HOST_33_config \
MPC8360EMDS_HOST_66_config \
-MPC8360EMDS_SLAVE_config: unconfig
+MPC8360EMDS_SLAVE_config \
+MPC8360EMDS_ATM_config: unconfig
@mkdir -p $(obj)include
@echo "" >$(obj)include/config.h ; \
if [ "$(findstring _HOST_,$@)" ] ; then \
@@ -1823,10 +1836,17 @@ MPC8360EMDS_SLAVE_config: unconfig
if [ "$(findstring _33_,$@)" ] ; then \
echo -n "...33M ..." ; \
echo "#define PCI_33M" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
echo -n "...66M..." ; \
echo "#define PCI_66M" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+ fi ; \
+ if [ "$(findstring _ATM_,$@)" ] ; then \
+ echo -n "...ATM..." ; \
+ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \
fi ;
@$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale
@@ -1988,13 +2008,13 @@ AmigaOneG3SE_config: unconfig
BAB7xx_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec
-CPCI750_config: unconfig
+CPCI750_config: unconfig
@$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd
-DB64360_config: unconfig
+DB64360_config: unconfig
@$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell
-DB64460_config: unconfig
+DB64460_config: unconfig
@$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell
ELPPC_config: unconfig
diff --git a/board/amcc/sequoia/cmd_sequoia.c b/board/amcc/sequoia/cmd_sequoia.c
index e7997e94db..6b9043a058 100644
--- a/board/amcc/sequoia/cmd_sequoia.c
+++ b/board/amcc/sequoia/cmd_sequoia.c
@@ -40,7 +40,7 @@
* All Sequoias & Rainiers select from two possible EEPROMs in Boot
* Config F. One for 33MHz PCI, one for 66MHz PCI. The following
* values are for the 33MHz PCI configuration. Byte 5 (0 base) is
- * the only value affected for a 66MHz PCI and simply needs a +0x10.
+ * the only value affected for a 33MHz PCI and simply needs a | 0x08.
*/
#define NAND_COMPATIBLE 0x01
@@ -57,6 +57,7 @@ static char *config_labels[] = {
"CPU: 416 PLB: 166 OPB: 83 EBC: 55",
"CPU: 500 PLB: 166 OPB: 83 EBC: 55",
"CPU: 533 PLB: 133 OPB: 66 EBC: 66",
+ "CPU: 667 PLB: 133 OPB: 66 EBC: 66",
"CPU: 667 PLB: 166 OPB: 83 EBC: 55",
NULL
};
@@ -98,6 +99,11 @@ static u8 boot_configs[][17] = {
0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
},
{
+ (NOR_COMPATIBLE),
+ 0x87, 0x78, 0xa2, 0x56, 0x09, 0x57, 0xa0, 0x30, 0x40,
+ 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+ },
+ {
(NAND_COMPATIBLE | NOR_COMPATIBLE),
0x87, 0x78, 0xa2, 0x52, 0x09, 0xd7, 0xa0, 0x30, 0x40,
0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
diff --git a/board/cds/common/ft_board.c b/board/cds/common/ft_board.c
index 9d97905ca9..3eda1009ef 100644
--- a/board/cds/common/ft_board.c
+++ b/board/cds/common/ft_board.c
@@ -37,17 +37,24 @@ static void cds_pci_fixup(void *blob)
map = ft_get_prop(blob, "/" OF_SOC "/pci@8000/interrupt-map", &len);
- len /= sizeof(u32);
+ if (!map)
+ map = ft_get_prop(blob, "/" OF_PCI "/interrupt-map", &len);
- slot = get_pci_slot();
+ if (map) {
+ len /= sizeof(u32);
- for (i=0;i<len;i+=7) {
- /* We rotate the interrupt pins so that the mapping
- * changes depending on the slot the carrier card is in.
- */
- map[3] = ((map[3] + slot - 2) % 4) + 1;
+ slot = get_pci_slot();
- map+=7;
+ for (i=0;i<len;i+=7) {
+ /* We rotate the interrupt pins so that the mapping
+ * changes depending on the slot the carrier card is in.
+ */
+ map[3] = ((map[3] + slot - 2) % 4) + 1;
+
+ map+=7;
+ }
+ } else {
+ printf("*** Warning - No PCI node found\n");
}
}
#endif
diff --git a/board/dbau1x00/u-boot.lds b/board/dbau1x00/u-boot.lds
index 10c9917986..9639b81acc 100644
--- a/board/dbau1x00/u-boot.lds
+++ b/board/dbau1x00/u-boot.lds
@@ -43,14 +43,14 @@ SECTIONS
. = ALIGN(4);
.data : { *(.data) }
- . = ALIGN(4);
- .sdata : { *(.sdata) }
-
- _gp = ALIGN(16);
+ . = .;
+ _gp = ALIGN(16) + 0x7ff0;
- __got_start = .;
- .got : { *(.got) }
- __got_end = .;
+ .got : {
+ __got_start = .;
+ *(.got)
+ __got_end = .;
+ }
.sdata : { *(.sdata) }
diff --git a/board/freescale/common/pq-mds-pib.c b/board/freescale/common/pq-mds-pib.c
index d79f2eb2e8..e4f96e8848 100644
--- a/board/freescale/common/pq-mds-pib.c
+++ b/board/freescale/common/pq-mds-pib.c
@@ -79,19 +79,19 @@ int pib_init(void)
printf("QOC3 ATM card on PMC0\n");
#elif defined(CONFIG_MPC832XEMDS)
- val = 0;
- i2c_write(0x26, 0x7, 1, &val, 1);
- val = 0xf7;
- i2c_write(0x26, 0x3, 1, &val, 1);
-
- val = 0;
- i2c_write(0x21, 0x6, 1, &val, 1);
- i2c_write(0x21, 0x7, 1, &val, 1);
-
- val = 0xdf;
- i2c_write(0x21, 0x2, 1, &val, 1);
- val = 0xef;
- i2c_write(0x21, 0x3, 1, &val, 1);
+ val8 = 0;
+ i2c_write(0x26, 0x7, 1, &val8, 1);
+ val8 = 0xf7;
+ i2c_write(0x26, 0x3, 1, &val8, 1);
+
+ val8 = 0;
+ i2c_write(0x21, 0x6, 1, &val8, 1);
+ i2c_write(0x21, 0x7, 1, &val8, 1);
+
+ val8 = 0xdf;
+ i2c_write(0x21, 0x2, 1, &val8, 1);
+ val8 = 0xef;
+ i2c_write(0x21, 0x3, 1, &val8, 1);
eieio();
diff --git a/board/freescale/m54455evb/config.mk b/board/freescale/m54455evb/config.mk
index ce014edca8..b42fcc94ce 100644
--- a/board/freescale/m54455evb/config.mk
+++ b/board/freescale/m54455evb/config.mk
@@ -22,4 +22,6 @@
# MA 02111-1307 USA
#
-TEXT_BASE = 0
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
diff --git a/board/gth2/u-boot.lds b/board/gth2/u-boot.lds
index 8ba0b6d4c1..90432cb888 100644
--- a/board/gth2/u-boot.lds
+++ b/board/gth2/u-boot.lds
@@ -43,14 +43,14 @@ SECTIONS
. = ALIGN(4);
.data : { *(.data) }
- . = ALIGN(4);
- .sdata : { *(.sdata) }
+ . = .;
+ _gp = ALIGN(16) + 0x7ff0;
- _gp = ALIGN(16);
-
- __got_start = .;
- .got : { *(.got) }
- __got_end = .;
+ .got : {
+ __got_start = .;
+ *(.got)
+ __got_end = .;
+ }
.sdata : { *(.sdata) }
diff --git a/board/incaip/u-boot.lds b/board/incaip/u-boot.lds
index 10c9917986..9639b81acc 100644
--- a/board/incaip/u-boot.lds
+++ b/board/incaip/u-boot.lds
@@ -43,14 +43,14 @@ SECTIONS
. = ALIGN(4);
.data : { *(.data) }
- . = ALIGN(4);
- .sdata : { *(.sdata) }
-
- _gp = ALIGN(16);
+ . = .;
+ _gp = ALIGN(16) + 0x7ff0;
- __got_start = .;
- .got : { *(.got) }
- __got_end = .;
+ .got : {
+ __got_start = .;
+ *(.got)
+ __got_end = .;
+ }
.sdata : { *(.sdata) }
diff --git a/board/innokom/innokom.c b/board/innokom/innokom.c
index 7f8f47c3a2..c2b88ae16a 100644
--- a/board/innokom/innokom.c
+++ b/board/innokom/innokom.c
@@ -72,7 +72,7 @@ int i2c_init_board(void)
int misc_init_r(void)
{
- uchar *str;
+ char *str;
/* determine if the software update key is pressed during startup */
if (GPLR0 & 0x00000800) {
diff --git a/board/m5282evb/m5282evb.c b/board/m5282evb/m5282evb.c
index 243d6a4d83..7d6d1d6231 100644
--- a/board/m5282evb/m5282evb.c
+++ b/board/m5282evb/m5282evb.c
@@ -89,4 +89,5 @@ long int initdram (int board_type)
/* Write to the SDRAM Mode Register */
*(u32 *)(CFG_SDRAM_BASE + 0x400) = 0xA5A59696;
}
+ return dramsize;
}
diff --git a/board/motionpro/motionpro.c b/board/motionpro/motionpro.c
index f83998e5aa..68257b861d 100644
--- a/board/motionpro/motionpro.c
+++ b/board/motionpro/motionpro.c
@@ -138,6 +138,12 @@ long int initdram(int board_type)
#ifndef CFG_RAMBOOT
ulong test1, test2;
+ /* According to AN3221 (MPC5200B SDRAM Initialization and
+ * Configuration), the SDelay register must be written a value of
+ * 0x00000004 as the first step of the SDRAM contorller configuration.
+ */
+ *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
+
/* configure SDRAM start/end for detection */
*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */
*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000; /* disabled */
diff --git a/board/pb1x00/u-boot.lds b/board/pb1x00/u-boot.lds
index a2d19a84c9..363d974c48 100644
--- a/board/pb1x00/u-boot.lds
+++ b/board/pb1x00/u-boot.lds
@@ -43,14 +43,14 @@ SECTIONS
. = ALIGN(4);
.data : { *(.data) }
- . = ALIGN(4);
- .sdata : { *(.sdata) }
+ . = .;
+ _gp = ALIGN(16) + 0x7ff0;
- _gp = ALIGN(16);
-
- __got_start = .;
- .got : { *(.got) }
- __got_end = .;
+ .got : {
+ __got_start = .;
+ *(.got)
+ __got_end = .;
+ }
.sdata : { *(.sdata) }
diff --git a/board/purple/u-boot.lds b/board/purple/u-boot.lds
index 1bdac1f4a6..e7ec012c3b 100644
--- a/board/purple/u-boot.lds
+++ b/board/purple/u-boot.lds
@@ -53,14 +53,14 @@ SECTIONS
. = ALIGN(4);
.data : { *(.data) }
- . = ALIGN(4);
- .sdata : { *(.sdata) }
-
- _gp = ALIGN(16);
+ . = .;
+ _gp = ALIGN(16) + 0x7ff0;
- __got_start = .;
- .got : { *(.got) }
- __got_end = .;
+ .got : {
+ __got_start = .;
+ *(.got)
+ __got_end = .;
+ }
.sdata : { *(.sdata) }
diff --git a/board/pxa255_idp/Makefile b/board/pxa255_idp/Makefile
index a957dd3961..32399f0e94 100644
--- a/board/pxa255_idp/Makefile
+++ b/board/pxa255_idp/Makefile
@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
COBJS := pxa_idp.o
-SOBJS := memsetup.o
+SOBJS := lowlevel_init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/pxa255_idp/config.mk b/board/pxa255_idp/config.mk
index d2a2040e68..55c8b270a1 100644
--- a/board/pxa255_idp/config.mk
+++ b/board/pxa255_idp/config.mk
@@ -1,3 +1,3 @@
#TEXT_BASE = 0xa1700000
-TEXT_BASE = 0xa3000000
+TEXT_BASE = 0xa3080000
#TEXT_BASE = 0
diff --git a/board/pxa255_idp/memsetup.S b/board/pxa255_idp/lowlevel_init.S
index 7e485a28a6..aaa4d8eb93 100644
--- a/board/pxa255_idp/memsetup.S
+++ b/board/pxa255_idp/lowlevel_init.S
@@ -3,7 +3,7 @@
*
* NOTE: I haven't clean this up considerably, just enough to get it
* running. See hal_platform_setup.h for the source. See
- * board/cradle/memsetup.S for another PXA250 setup that is
+ * board/cradle/lowlevel_init.S for another PXA250 setup that is
* much cleaner.
*
* See file CREDITS for list of people who contributed to this
@@ -41,8 +41,8 @@ DRAM_SIZE: .long CFG_DRAM_SIZE
/*
* Memory setup
*/
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
mov r10, lr
@@ -395,7 +395,7 @@ initclks:
/* Save SDRAM size */
ldr r1, =DRAM_SIZE
- str r8, [r1]
+ str r8, [r1]
/* Interrupt init: Mask all interrupts */
ldr r0, =ICMR /* enable no sources */
@@ -426,7 +426,7 @@ initclks:
bl blink
#endif
-endmemsetup:
+endlowlevel_init:
mov pc, r10
diff --git a/board/pxa255_idp/u-boot.lds b/board/pxa255_idp/u-boot.lds
index 20ce108938..2facd832e9 100644
--- a/board/pxa255_idp/u-boot.lds
+++ b/board/pxa255_idp/u-boot.lds
@@ -44,6 +44,7 @@ SECTIONS
. = ALIGN(4);
.got : { *(.got) }
+ . = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
diff --git a/board/tb0229/u-boot.lds b/board/tb0229/u-boot.lds
index 30a2bc57ea..b2fa9f22dc 100644
--- a/board/tb0229/u-boot.lds
+++ b/board/tb0229/u-boot.lds
@@ -43,14 +43,14 @@ SECTIONS
. = ALIGN(4);
.data : { *(.data) }
- . = ALIGN(4);
- .sdata : { *(.sdata) }
-
- _gp = ALIGN(16);
+ . = .;
+ _gp = ALIGN(16) + 0x7ff0;
- __got_start = .;
- .got : { *(.got) }
- __got_end = .;
+ .got : {
+ __got_start = .;
+ *(.got)
+ __got_end = .;
+ }
.sdata : { *(.sdata) }
diff --git a/board/tqm5200/cmd_stk52xx.c b/board/tqm5200/cmd_stk52xx.c
index b746679afa..27a6c4163d 100644
--- a/board/tqm5200/cmd_stk52xx.c
+++ b/board/tqm5200/cmd_stk52xx.c
@@ -561,7 +561,7 @@ void led_init(void)
gpt->gpt6.emsr |= 0x00000024;
gpt->gpt7.emsr |= 0x00000024;
-
+#ifndef CONFIG_TQM5200S
/* enable SM501 GPIO control (in both power modes) */
*(vu_long *) (SM501_MMIO_BASE+SM501_POWER_MODE0_GATE) |=
POWER_MODE_GATE_GPIO_PWM_I2C;
@@ -574,6 +574,7 @@ void led_init(void)
/* configure SM501 gpio pins 48-51 as output */
*(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_DIR_HIGH) |= (0xF << 16);
+#endif /* !CONFIG_TQM5200S */
}
/*
@@ -650,7 +651,7 @@ int do_led(char *argv[])
gpt->gpt7.emsr &= ~(1 << 4);
}
break;
-
+#ifndef CONFIG_TQM5200S
case 24:
if (strcmp (argv[3], "on") == 0) {
*(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_LOW) |=
@@ -730,7 +731,7 @@ int do_led(char *argv[])
~(0x1 << 19);
}
break;
-
+#endif /* !CONFIG_TQM5200S */
default:
printf ("%s: invalid led number %s\n", __FUNCTION__, argv[2]);
return 1;
@@ -1110,7 +1111,7 @@ int do_rs232(char *argv[])
return error_status;
}
-#ifndef CONFIG_FO300
+#if !defined(CONFIG_FO300) && !defined(CONFIG_TQM5200S)
static void sm501_backlight (unsigned int state)
{
if (state == BL_ON) {
@@ -1120,7 +1121,7 @@ static void sm501_backlight (unsigned int state)
*(vu_long *)(SM501_MMIO_BASE+SM501_PANEL_DISPLAY_CONTROL) &=
~((1 << 26) | (1 << 27));
}
-#endif
+#endif /* !CONFIG_FO300 & !CONFIG_TQM5200S */
int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
@@ -1160,7 +1161,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
else
printf ("Error\n");
return rcode;
-#ifndef CONFIG_FO300
+#if !defined(CONFIG_FO300) && !defined(CONFIG_TQM5200S)
} else if (strncmp (argv[1], "backlight", 4) == 0) {
if (strncmp (argv[2], "on", 2) == 0) {
sm501_backlight (BL_ON);
@@ -1170,7 +1171,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
sm501_backlight (BL_OFF);
return 0;
}
-#endif
+#endif /* !CONFIG_FO300 & !CONFIG_TQM5200S */
}
break;
@@ -1228,8 +1229,10 @@ U_BOOT_CMD(
" - loopback plug for X83 required\n"
"fkt rs232 number\n"
" - loopback plug(s) for X2 required\n"
+#ifndef CONFIG_TQM5200S
"fkt backlight on/off\n"
" - switch backlight on or off\n"
+#endif /* !CONFIG_TQM5200S */
);
#elif defined(CONFIG_FO300)
U_BOOT_CMD(
diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c
index 29d6f00427..d10cb5937d 100644
--- a/board/tqm5200/tqm5200.c
+++ b/board/tqm5200/tqm5200.c
@@ -543,6 +543,7 @@ int last_stage_init (void)
__asm__ volatile ("sync");
}
+#ifndef CONFIG_TQM5200S /* The TQM5200S has no SM501 grafic controller */
/*
* Check for Grafic Controller
*/
@@ -586,6 +587,7 @@ int last_stage_init (void)
#endif
return 0;
+#endif /* !CONFIG_TQM5200S */
}
#ifdef CONFIG_VIDEO_SM501
diff --git a/board/tqm8xx/tqm8xx.c b/board/tqm8xx/tqm8xx.c
index 6b206f8a18..cebdcc0764 100644
--- a/board/tqm8xx/tqm8xx.c
+++ b/board/tqm8xx/tqm8xx.c
@@ -354,6 +354,8 @@ long int initdram (int board_type)
udelay (10000);
#ifdef CONFIG_CAN_DRIVER
+ /* UPM initialization for CAN @ CLKOUT <= 66 MHz */
+
/* Initialize OR3 / BR3 */
memctl->memc_or3 = CFG_OR3_CAN;
memctl->memc_br3 = CFG_BR3_CAN;
@@ -362,7 +364,7 @@ long int initdram (int board_type)
memctl->memc_mbmr = MBMR_GPL_B4DIS; /* GPL_B4 ouput line Disable */
/* Initialize UPMB for CAN: single read */
- memctl->memc_mdr = 0xFFFFC004;
+ memctl->memc_mdr = 0xFFFFCC04;
memctl->memc_mcr = 0x0100 | UPMB;
memctl->memc_mdr = 0x0FFFD004;
@@ -374,23 +376,23 @@ long int initdram (int board_type)
memctl->memc_mdr = 0x3FFFC004;
memctl->memc_mcr = 0x0103 | UPMB;
- memctl->memc_mdr = 0xFFFFDC05;
+ memctl->memc_mdr = 0xFFFFDC07;
memctl->memc_mcr = 0x0104 | UPMB;
/* Initialize UPMB for CAN: single write */
- memctl->memc_mdr = 0xFFFCC004;
+ memctl->memc_mdr = 0xFFFCCC04;
memctl->memc_mcr = 0x0118 | UPMB;
- memctl->memc_mdr = 0xCFFCD004;
+ memctl->memc_mdr = 0xCFFCDC04;
memctl->memc_mcr = 0x0119 | UPMB;
- memctl->memc_mdr = 0x0FFCC000;
+ memctl->memc_mdr = 0x3FFCC000;
memctl->memc_mcr = 0x011A | UPMB;
- memctl->memc_mdr = 0x7FFCC004;
+ memctl->memc_mdr = 0xFFFCC004;
memctl->memc_mcr = 0x011B | UPMB;
- memctl->memc_mdr = 0xFFFDCC05;
+ memctl->memc_mdr = 0xFFFDC405;
memctl->memc_mcr = 0x011C | UPMB;
#endif /* CONFIG_CAN_DRIVER */
diff --git a/board/xsengine/flash.c b/board/xsengine/flash.c
index 2b9afc7a77..a188e24408 100644
--- a/board/xsengine/flash.c
+++ b/board/xsengine/flash.c
@@ -46,11 +46,11 @@ unsigned long flash_init (void)
for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
switch (i) {
case 0:
- flash_get_size ((long *) PHYS_FLASH_1, &flash_info[i]);
+ flash_get_size ((vu_long *) PHYS_FLASH_1, &flash_info[i]);
flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
break;
case 1:
- flash_get_size ((long *) PHYS_FLASH_2, &flash_info[i]);
+ flash_get_size ((vu_long *) PHYS_FLASH_2, &flash_info[i]);
flash_get_offsets (PHYS_FLASH_2, &flash_info[i]);
break;
default:
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index 6ebedfbc83..d8163494e8 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -466,7 +466,7 @@ U_BOOT_CMD(
"\t'arg' can be the address of an initrd image\n"
#if defined(CONFIG_OF_FLAT_TREE) || defined(CONFIG_OF_LIBFDT)
"\tWhen booting a Linux kernel which requires a flat device-tree\n"
- "\ta third argument is required which is the address of the of the\n"
+ "\ta third argument is required which is the address of the\n"
"\tdevice-tree blob. To boot that kernel without an initrd image,\n"
"\tuse a '-' for the second argument. If you do not pass a third\n"
"\ta bd_info struct will be passed instead\n"
diff --git a/common/cmd_dtt.c b/common/cmd_dtt.c
index 8da95bf9d3..804d467f25 100644
--- a/common/cmd_dtt.c
+++ b/common/cmd_dtt.c
@@ -57,7 +57,7 @@ int do_dtt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
dtt, 1, 1, do_dtt,
- "dtt - Digital Thermometer and Themostat\n",
+ "dtt - Digital Thermometer and Thermostat\n",
" - Read temperature from digital thermometer and thermostat.\n"
);
diff --git a/cpu/arm920t/at91rm9200/usb.c b/cpu/arm920t/at91rm9200/usb.c
index 366262e4cc..c121de6328 100644
--- a/cpu/arm920t/at91rm9200/usb.c
+++ b/cpu/arm920t/at91rm9200/usb.c
@@ -28,7 +28,7 @@
#include <asm/arch/hardware.h>
-int usb_cpu_init()
+int usb_cpu_init(void)
{
/* Enable USB host clock. */
*AT91C_PMC_SCER = AT91C_PMC_UHP; /* 48MHz clock enabled for UHP */
@@ -36,7 +36,7 @@ int usb_cpu_init()
return 0;
}
-int usb_cpu_stop()
+int usb_cpu_stop(void)
{
/* Initialization failed */
*AT91C_PMC_PCDR = 1 << AT91C_ID_UHP; /* Peripheral Clock Disable Register */
@@ -44,9 +44,9 @@ int usb_cpu_stop()
return 0;
}
-int usb_cpu_init_fail()
+int usb_cpu_init_fail(void)
{
- usb_cpu_stop();
+ return usb_cpu_stop();
}
# endif /* CONFIG_AT91RM9200 */
diff --git a/cpu/mcf52x2/start.S b/cpu/mcf52x2/start.S
index 686e2a5333..260a09abf7 100644
--- a/cpu/mcf52x2/start.S
+++ b/cpu/mcf52x2/start.S
@@ -58,7 +58,7 @@ _vectors:
.long 0x00000000 /* Flash offset is 0 until we setup CS0 */
#if defined(CONFIG_R5200)
.long 0x400
-#elif defined(CONFIG_M5282)
+#elif defined(CONFIG_M5282) && (TEXT_BASE == CFG_INT_FLASH_BASE)
.long _start - TEXT_BASE
#else
.long _START
@@ -177,7 +177,11 @@ _after_flashbar_copy:
* therefore no VBR to set
*/
#if !defined(CONFIG_MONITOR_IS_IN_RAM)
+#if defined(CONFIG_M5282) && (TEXT_BASE == CFG_INT_FLASH_BASE)
+ move.l #CFG_INT_FLASH_BASE, %d0
+#else
move.l #CFG_FLASH_BASE, %d0
+#endif
movec %d0, %VBR
#endif
diff --git a/cpu/mcf532x/start.S b/cpu/mcf532x/start.S
index 5cc1c87cdd..61be2eac69 100644
--- a/cpu/mcf532x/start.S
+++ b/cpu/mcf532x/start.S
@@ -131,7 +131,7 @@ _start:
movec %d0, %VBR
move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_CTRL), %d0
- movec %d0, %RAMBAR0
+ movec %d0, %RAMBAR1
/* invalidate and disable cache */
move.l #0x01000000, %d0 /* Invalidate cache cmd */
@@ -268,7 +268,7 @@ _int_handler:
icache_enable:
move.l #0x01000000, %d0 /* Invalidate cache cmd */
movec %d0, %CACR /* Invalidate cache */
- move.l #(CFG_SDRAM_BASE + 0xc000 + ((CFG_SDRAM_SIZE & 0x1fe0) << 11)), %d0
+ move.l #(CFG_SDRAM_BASE + 0x1c000), %d0
movec %d0, %ACR0 /* Enable cache */
move.l #0x80000200, %d0 /* Setup cache mask */
diff --git a/cpu/mips/config.mk b/cpu/mips/config.mk
index b29986e26b..487c4eb5d6 100644
--- a/cpu/mips/config.mk
+++ b/cpu/mips/config.mk
@@ -35,6 +35,6 @@ else
ENDIANNESS = -EB
endif
-MIPSFLAGS += $(ENDIANNESS) -mabicalls
+MIPSFLAGS += $(ENDIANNESS)
PLATFORM_CPPFLAGS += $(MIPSFLAGS)
diff --git a/cpu/mips/start.S b/cpu/mips/start.S
index e91e2137d7..074d01d2dd 100644
--- a/cpu/mips/start.S
+++ b/cpu/mips/start.S
@@ -234,11 +234,11 @@ reset:
li t0, CONF_CM_UNCACHED
mtc0 t0, CP0_CONFIG
- /* Initialize GOT pointer.
+ /* Initialize $gp.
*/
bal 1f
nop
- .word _GLOBAL_OFFSET_TABLE_
+ .word _gp
1:
move gp, ra
lw t1, 0(ra)
@@ -306,9 +306,9 @@ relocate_code:
move t1, a2
/*
- * Fix GOT pointer:
+ * Fix $gp:
*
- * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address
+ * New $gp = (Old $gp - CFG_MONITOR_BASE) + Destination Address
*/
move t6, gp
sub gp, CFG_MONITOR_BASE
@@ -341,15 +341,22 @@ relocate_code:
j t0
nop
+ .gpword _GLOBAL_OFFSET_TABLE_ /* _GLOBAL_OFFSET_TABLE_ - _gp */
.word uboot_end_data
.word uboot_end
.word num_got_entries
in_ram:
- /* Now we want to update GOT.
+ /*
+ * Now we want to update GOT.
+ *
+ * GOT[0] is reserved. GOT[1] is also reserved for the dynamic object
+ * generated by GNU ld. Skip these reserved entries from relocation.
*/
lw t3, -4(t0) /* t3 <-- num_got_entries */
- addi t4, gp, 8 /* Skipping first two entries. */
+ lw t4, -16(t0) /* t4 <-- (_GLOBAL_OFFSET_TABLE_ - _gp) */
+ add t4, t4, gp /* t4 now holds _GLOBAL_OFFSET_TABLE_ */
+ addi t4, t4, 8 /* Skipping first two entries. */
li t2, 2
1:
lw t1, 0(t4)
diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index 08e04685f5..bbc54448da 100644
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -163,7 +163,12 @@ int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
* Initiate hard reset in debug control register DBCR0
* Make sure MSR[DE] = 1
*/
- unsigned long val;
+ unsigned long val, msr;
+
+ msr = mfmsr ();
+ msr |= MSR_DE;
+ mtmsr (msr);
+
val = mfspr(DBCR0);
val |= 0x70000000;
mtspr(DBCR0,val);
diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S
index 2c98c2ad8a..ada6ea505f 100644
--- a/cpu/mpc85xx/start.S
+++ b/cpu/mpc85xx/start.S
@@ -218,6 +218,8 @@ _start_e500:
bdnz 0b
/* Clear and set up some registers. */
+ li r0,0
+ mtmsr r0
li r0,0x0000
lis r1,0xffff
mtspr DEC,r0 /* prevent dec exceptions */
@@ -266,18 +268,17 @@ _start_e500:
*/
lis r3,CFG_INIT_RAM_ADDR@h
ori r3,r3,CFG_INIT_RAM_ADDR@l
- li r2,512 /* 512*32=16K */
+ li r2,(CFG_DCACHE_SIZE / (2 * CFG_CACHELINE_SIZE))
mtctr r2
li r0,0
1:
dcbz r0,r3
dcbtls 0,r0,r3
- addi r3,r3,32
+ addi r3,r3,CFG_CACHELINE_SIZE
bdnz 1b
/* Jump out the last 4K page and continue to 'normal' start */
#ifdef CFG_RAMBOOT
- bl 3f
b _start_cont
#else
/* Calculate absolute address in FLASH and jump there */
@@ -286,15 +287,9 @@ _start_e500:
ori r3,r3,CFG_MONITOR_BASE@l
addi r3,r3,_start_cont - _start + _START_OFFSET
mtlr r3
+ blr
#endif
-3: li r0,0
- mtspr SRR1,r0 /* Keep things disabled for now */
- mflr r1
- mtspr SRR0,r1
- rfi
- isync
-
.text
.globl _start
_start:
@@ -701,6 +696,7 @@ in8:
.globl out8
out8:
stb r4,0x0000(r3)
+ sync
blr
/*------------------------------------------------------------------------------- */
@@ -710,6 +706,7 @@ out8:
.globl out16
out16:
sth r4,0x0000(r3)
+ sync
blr
/*------------------------------------------------------------------------------- */
@@ -719,6 +716,7 @@ out16:
.globl out16r
out16r:
sthbrx r4,r0,r3
+ sync
blr
/*------------------------------------------------------------------------------- */
@@ -728,6 +726,7 @@ out16r:
.globl out32
out32:
stw r4,0x0000(r3)
+ sync
blr
/*------------------------------------------------------------------------------- */
@@ -737,6 +736,7 @@ out32:
.globl out32r
out32r:
stwbrx r4,r0,r3
+ sync
blr
/*------------------------------------------------------------------------------- */
@@ -1061,11 +1061,11 @@ unlock_ram_in_cache:
/* invalidate the INIT_RAM section */
lis r3,(CFG_INIT_RAM_ADDR & ~31)@h
ori r3,r3,(CFG_INIT_RAM_ADDR & ~31)@l
- li r4,512
+ li r4,(CFG_DCACHE_SIZE / (2 * CFG_CACHELINE_SIZE))
mtctr r4
1: icbi r0,r3
dcbi r0,r3
- addi r3,r3,32
+ addi r3,r3,CFG_CACHELINE_SIZE
bdnz 1b
sync /* Wait for all icbi to complete on bus */
isync
diff --git a/cpu/pxa/config.mk b/cpu/pxa/config.mk
index fb810ca7c2..f0b86b7dc1 100644
--- a/cpu/pxa/config.mk
+++ b/cpu/pxa/config.mk
@@ -25,8 +25,7 @@
PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \
-msoft-float
-#PLATFORM_CPPFLAGS += -mapcs-32 -march=armv4 -mtune=strongarm1100
-PLATFORM_CPPFLAGS += -march=armv5 -mtune=xscale
+PLATFORM_CPPFLAGS += -march=armv5te -mtune=xscale
# =========================================================================
#
# Supply options according to compiler version
diff --git a/cpu/pxa/serial.c b/cpu/pxa/serial.c
index 51e7f65887..9ba457e75a 100644
--- a/cpu/pxa/serial.c
+++ b/cpu/pxa/serial.c
@@ -35,17 +35,17 @@
DECLARE_GLOBAL_DATA_PTR;
-#define FFUART 0
-#define BTUART 1
-#define STUART 2
+#define FFUART_INDEX 0
+#define BTUART_INDEX 1
+#define STUART_INDEX 2
#ifndef CONFIG_SERIAL_MULTI
#if defined (CONFIG_FFUART)
-#define UART_INDEX FFUART
+#define UART_INDEX FFUART_INDEX
#elif defined (CONFIG_BTUART)
-#define UART_INDEX BTUART
+#define UART_INDEX BTUART_INDEX
#elif defined (CONFIG_STUART)
-#define UART_INDEX STUART
+#define UART_INDEX STUART_INDEX
#else
#error "Bad: you didn't configure serial ..."
#endif
@@ -71,7 +71,7 @@ void pxa_setbrg_dev (unsigned int uart_index)
hang ();
switch (uart_index) {
- case FFUART:
+ case FFUART_INDEX:
#ifdef CONFIG_CPU_MONAHANS
CKENA |= CKENA_22_FFUART;
#else
@@ -90,7 +90,7 @@ void pxa_setbrg_dev (unsigned int uart_index)
FFIER = IER_UUE; /* Enable FFUART */
break;
- case BTUART:
+ case BTUART_INDEX:
#ifdef CONFIG_CPU_MONAHANS
CKENA |= CKENA_21_BTUART;
#else
@@ -110,7 +110,7 @@ void pxa_setbrg_dev (unsigned int uart_index)
break;
- case STUART:
+ case STUART_INDEX:
#ifdef CONFIG_CPU_MONAHANS
CKENA |= CKENA_23_STUART;
#else
@@ -154,20 +154,20 @@ int pxa_init_dev (unsigned int uart_index)
void pxa_putc_dev (unsigned int uart_index,const char c)
{
switch (uart_index) {
- case FFUART:
+ case FFUART_INDEX:
/* wait for room in the tx FIFO on FFUART */
while ((FFLSR & LSR_TEMT) == 0)
WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
FFTHR = c;
break;
- case BTUART:
+ case BTUART_INDEX:
while ((BTLSR & LSR_TEMT ) == 0 )
WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
BTTHR = c;
break;
- case STUART:
+ case STUART_INDEX:
while ((STLSR & LSR_TEMT ) == 0 )
WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
STTHR = c;
@@ -187,11 +187,11 @@ void pxa_putc_dev (unsigned int uart_index,const char c)
int pxa_tstc_dev (unsigned int uart_index)
{
switch (uart_index) {
- case FFUART:
+ case FFUART_INDEX:
return FFLSR & LSR_DR;
- case BTUART:
+ case BTUART_INDEX:
return BTLSR & LSR_DR;
- case STUART:
+ case STUART_INDEX:
return STLSR & LSR_DR;
}
return -1;
@@ -205,16 +205,16 @@ int pxa_tstc_dev (unsigned int uart_index)
int pxa_getc_dev (unsigned int uart_index)
{
switch (uart_index) {
- case FFUART:
+ case FFUART_INDEX:
while (!(FFLSR & LSR_DR))
WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
return (char) FFRBR & 0xff;
- case BTUART:
+ case BTUART_INDEX:
while (!(BTLSR & LSR_DR))
WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
return (char) BTRBR & 0xff;
- case STUART:
+ case STUART_INDEX:
while (!(STLSR & LSR_DR))
WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
return (char) STRBR & 0xff;
@@ -233,32 +233,32 @@ pxa_puts_dev (unsigned int uart_index,const char *s)
#if defined (CONFIG_FFUART)
static int ffuart_init(void)
{
- return pxa_init_dev(FFUART);
+ return pxa_init_dev(FFUART_INDEX);
}
static void ffuart_setbrg(void)
{
- return pxa_setbrg_dev(FFUART);
+ return pxa_setbrg_dev(FFUART_INDEX);
}
static void ffuart_putc(const char c)
{
- return pxa_putc_dev(FFUART,c);
+ return pxa_putc_dev(FFUART_INDEX,c);
}
static void ffuart_puts(const char *s)
{
- return pxa_puts_dev(FFUART,s);
+ return pxa_puts_dev(FFUART_INDEX,s);
}
static int ffuart_getc(void)
{
- return pxa_getc_dev(FFUART);
+ return pxa_getc_dev(FFUART_INDEX);
}
static int ffuart_tstc(void)
{
- return pxa_tstc_dev(FFUART);
+ return pxa_tstc_dev(FFUART_INDEX);
}
struct serial_device serial_ffuart_device =
@@ -277,32 +277,32 @@ struct serial_device serial_ffuart_device =
#if defined (CONFIG_BTUART)
static int btuart_init(void)
{
- return pxa_init_dev(BTUART);
+ return pxa_init_dev(BTUART_INDEX);
}
static void btuart_setbrg(void)
{
- return pxa_setbrg_dev(BTUART);
+ return pxa_setbrg_dev(BTUART_INDEX);
}
static void btuart_putc(const char c)
{
- return pxa_putc_dev(BTUART,c);
+ return pxa_putc_dev(BTUART_INDEX,c);
}
static void btuart_puts(const char *s)
{
- return pxa_puts_dev(BTUART,s);
+ return pxa_puts_dev(BTUART_INDEX,s);
}
static int btuart_getc(void)
{
- return pxa_getc_dev(BTUART);
+ return pxa_getc_dev(BTUART_INDEX);
}
static int btuart_tstc(void)
{
- return pxa_tstc_dev(BTUART);
+ return pxa_tstc_dev(BTUART_INDEX);
}
struct serial_device serial_btuart_device =
@@ -321,32 +321,32 @@ struct serial_device serial_btuart_device =
#if defined (CONFIG_STUART)
static int stuart_init(void)
{
- return pxa_init_dev(STUART);
+ return pxa_init_dev(STUART_INDEX);
}
static void stuart_setbrg(void)
{
- return pxa_setbrg_dev(STUART);
+ return pxa_setbrg_dev(STUART_INDEX);
}
static void stuart_putc(const char c)
{
- return pxa_putc_dev(STUART,c);
+ return pxa_putc_dev(STUART_INDEX,c);
}
static void stuart_puts(const char *s)
{
- return pxa_puts_dev(STUART,s);
+ return pxa_puts_dev(STUART_INDEX,s);
}
static int stuart_getc(void)
{
- return pxa_getc_dev(STUART);
+ return pxa_getc_dev(STUART_INDEX);
}
static int stuart_tstc(void)
{
- return pxa_tstc_dev(STUART);
+ return pxa_tstc_dev(STUART_INDEX);
}
struct serial_device serial_stuart_device =
diff --git a/cpu/pxa/start.S b/cpu/pxa/start.S
index ffaa30fdc5..b922485ed3 100644
--- a/cpu/pxa/start.S
+++ b/cpu/pxa/start.S
@@ -166,13 +166,17 @@ _start_armboot: .word start_armboot
/* */
/****************************************************************************/
/* mk@tbd: Fix this! */
-#ifdef CONFIG_CPU_MONAHANS
+#if defined(CONFIG_PXA250) || defined(CONFIG_CPU_MONAHANS)
#undef ICMR
#undef OSMR3
#undef OSCR
#undef OWER
#undef OIER
#endif
+#ifdef CONFIG_PXA250
+#undef RCSR
+#undef CCCR
+#endif
/* Interrupt-Controller base address */
IC_BASE: .word 0x40d00000
diff --git a/cpu/pxa/usb.c b/cpu/pxa/usb.c
index 3c11d4de44..72b7dfadfe 100644
--- a/cpu/pxa/usb.c
+++ b/cpu/pxa/usb.c
@@ -27,8 +27,9 @@
# if defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X)
#include <asm/arch/pxa-regs.h>
+#include <usb.h>
-int usb_cpu_init()
+int usb_cpu_init(void)
{
#if defined(CONFIG_CPU_MONAHANS)
/* Enable USB host clock. */
@@ -65,7 +66,7 @@ int usb_cpu_init()
return 0;
}
-int usb_cpu_stop()
+int usb_cpu_stop(void)
{
UHCHR |= UHCHR_FHR;
udelay(11);
@@ -86,7 +87,7 @@ int usb_cpu_stop()
return 0;
}
-int usb_cpu_init_fail()
+int usb_cpu_init_fail(void)
{
return 0;
}
diff --git a/drivers/Makefile b/drivers/Makefile
index 6bf05ccad1..d19588f3af 100755
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2006
+# (C) Copyright 2000-2007
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -27,34 +27,33 @@ include $(TOPDIR)/config.mk
LIB = $(obj)libdrivers.a
-COBJS = 3c589.o 5701rls.o ali512x.o at45.o ata_piix.o atmel_usart.o \
+COBJS = 3c589.o 5701rls.o ali512x.o at45.o ata_piix.o \
+ ati_radeon_fb.o atmel_usart.o \
bcm570x.o bcm570x_autoneg.o cfb_console.o cfi_flash.o \
cs8900.o ct69000.o dataflash.o dc2114x.o dm9000x.o \
- e1000.o eepro100.o enc28j60.o \
- i8042.o inca-ip_sw.o isp116x-hcd.o keyboard.o \
- lan91c96.o macb.o \
+ ds1722.o e1000.o eepro100.o enc28j60.o \
+ fsl_i2c.o fsl_pci_init.o \
+ i8042.o inca-ip_sw.o isp116x-hcd.o \
+ keyboard.o ks8695eth.o \
+ lan91c96.o macb.o mpc8xx_pcmcia.o mw_eeprom.o \
natsemi.o ne2000.o netarm_eth.o netconsole.o \
ns16550.o ns8382x.o ns87308.o ns7520_eth.o omap1510_i2c.o \
- omap24xx_i2c.o pci.o pci_auto.o pci_indirect.o \
- pcnet.o plb2800_eth.o \
- ps2ser.o ps2mult.o pc_keyb.o \
- rtl8019.o rtl8139.o rtl8169.o \
+ omap24xx_i2c.o pc_keyb.o \
+ pci.o pci_auto.o pci_indirect.o \
+ pcnet.o plb2800_eth.o ps2ser.o ps2mult.o pxa_pcmcia.o \
+ rpx_pcmcia.o rtl8019.o rtl8139.o rtl8169.o \
s3c4510b_eth.o s3c4510b_uart.o \
sed13806.o sed156x.o \
serial.o serial_max3100.o \
- serial_pl010.o serial_pl011.o serial_xuartlite.o \
+ serial_xuartlite.o \
sil680.o sl811_usb.o sm501.o smc91111.o smiLynxEM.o \
status_led.o sym53c8xx.o systemace.o ahci.o \
- ti_pci1410a.o tigon3.o tsec.o \
+ ti_pci1410a.o tigon3.o tqm8xx_pcmcia.o tsec.o \
tsi108_eth.o tsi108_i2c.o tsi108_pci.o \
usb_ohci.o \
usbdcore.o usbdcore_ep0.o usbdcore_mpc8xx.o usbdcore_omap1510.o \
usbtty.o \
- videomodes.o w83c553f.o \
- ks8695eth.o \
- pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o \
- rpx_pcmcia.o \
- fsl_i2c.o fsl_pci_init.o ati_radeon_fb.o
+ videomodes.o w83c553f.o
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/drivers/ds1722.c b/drivers/ds1722.c
index 227d8169a5..c19ee01393 100644
--- a/drivers/ds1722.c
+++ b/drivers/ds1722.c
@@ -1,10 +1,10 @@
#include <common.h>
-#include <ssi.h>
-
#ifdef CONFIG_DS1722
+#include <ssi.h>
+
static void ds1722_select(int dev)
{
ssi_set_interface(4096, 0, 0, 0);
diff --git a/drivers/fsl_pci_init.c b/drivers/fsl_pci_init.c
index 3a13eea1f2..1e778844a5 100644
--- a/drivers/fsl_pci_init.c
+++ b/drivers/fsl_pci_init.c
@@ -54,6 +54,7 @@ fsl_pci_init(struct pci_controller *hose)
u8 temp8;
int r;
int bridge;
+ int inbound = 0;
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) hose->cfg_addr;
pci_dev_t dev = PCI_BDF(busno,0,0);
@@ -74,6 +75,7 @@ fsl_pci_init(struct pci_controller *hose)
PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP |
(__ilog2(hose->regions[r].size) - 1);
pi++;
+ inbound = hose->regions[r].size > 0;
} else { /* Outbound */
po->powbar = (hose->regions[r].phys_start >> 12) & 0x000fffff;
po->potar = (hose->regions[r].bus_start >> 12) & 0x000fffff;
@@ -138,6 +140,12 @@ fsl_pci_init(struct pci_controller *hose)
pciauto_setup_device(hose, dev, 0, hose->pci_mem,
hose->pci_prefetch, hose->pci_io);
+ if (inbound) {
+ pci_hose_read_config_word(hose, dev, PCI_COMMAND, &temp16);
+ pci_hose_write_config_word(hose, dev, PCI_COMMAND,
+ temp16 | PCI_COMMAND_MEMORY);
+ }
+
#ifndef CONFIG_PCI_NOSCAN
printf (" Scanning PCI bus %02x\n", hose->current_busno);
hose->last_busno = pci_hose_scan_bus(hose,hose->current_busno);
diff --git a/drivers/mw_eeprom.c b/drivers/mw_eeprom.c
index 2a1f489842..2b3348810d 100644
--- a/drivers/mw_eeprom.c
+++ b/drivers/mw_eeprom.c
@@ -1,11 +1,11 @@
/* Three-wire (MicroWire) serial eeprom driver (for 93C46 and compatibles) */
#include <common.h>
-#include <ssi.h>
-
#ifdef CONFIG_MW_EEPROM
+#include <ssi.h>
+
/*
* Serial EEPROM opcodes, including start bit
*/
diff --git a/drivers/ne2000.c b/drivers/ne2000.c
index b7ed876165..695a1dc6c9 100644
--- a/drivers/ne2000.c
+++ b/drivers/ne2000.c
@@ -745,17 +745,15 @@ static void pcnet_reset_8390(void)
PRINTK("nic base is %lx\n", nic_base);
-#if 1
n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
n2k_outb(E8390_NODMA+E8390_PAGE1+E8390_STOP, E8390_CMD);
PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
-#endif
n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
- n2k_outb(n2k_inb(nic_base + PCNET_RESET), PCNET_RESET);
+ n2k_outb(n2k_inb(PCNET_RESET), PCNET_RESET);
for (i = 0; i < 100; i++) {
if ((r = (n2k_inb(EN0_ISR) & ENISR_RESET)) != 0)
@@ -833,6 +831,7 @@ static int plen[NB];
static int nrx = 0;
static int pkey = -1;
+static int initialized=0;
void uboot_push_packet_len(int len) {
PRINTK("pushed len = %d, nrx = %d\n", len, nrx);
@@ -846,7 +845,9 @@ void uboot_push_packet_len(int len) {
}
plen[nrx] = len;
dp83902a_recv(&pbuf[nrx*2000], len);
- nrx++;
+
+ /*Just pass it to the upper layer*/
+ NetReceive(&pbuf[nrx*2000], plen[nrx]);
}
void uboot_push_tx_done(int key, int val) {
@@ -903,37 +904,21 @@ int eth_init(bd_t *bd) {
if (dp83902a_init() == false)
return -1;
dp83902a_start(dev_addr);
+ initialized=1;
return 0;
}
void eth_halt() {
PRINTK("### eth_halt\n");
-
- dp83902a_stop();
+ if(initialized)
+ dp83902a_stop();
+ initialized=0;
}
int eth_rx() {
- int j, tmo;
-
- PRINTK("### eth_rx\n");
-
- tmo = get_timer (0) + TOUT * CFG_HZ;
- while(1) {
- dp83902a_poll();
- if (nrx > 0) {
- for(j=0; j<nrx; j++) {
- NetReceive(&pbuf[j*2000], plen[j]);
- }
- nrx = 0;
- return 1;
- }
- if (get_timer (0) >= tmo) {
- printf("timeout during rx\n");
- return 0;
- }
- }
- return 0;
+dp83902a_poll();
+return 1;
}
int eth_send(volatile void *packet, int length) {
@@ -959,5 +944,4 @@ int eth_send(volatile void *packet, int length) {
}
return 0;
}
-
#endif
diff --git a/drivers/ne2000.h b/drivers/ne2000.h
index 2955533d7a..c13d9f0bbb 100644
--- a/drivers/ne2000.h
+++ b/drivers/ne2000.h
@@ -42,7 +42,7 @@ are GPL, so this is, of course, GPL.
this file might be covered by the GNU General Public License.
Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
- at http://sources.redhat.com/ecos/ecos-license/ */
+ at http://sources.redhat.com/ecos/ecos-license/
-------------------------------------------
####ECOSGPLCOPYRIGHTEND####
####BSDCOPYRIGHTBEGIN####
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 93c68dd2e0..40f3d672ec 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
LIB := $(obj)libserial.a
-COBJS := mcfuart.o
+COBJS := mcfuart.o serial_pl010.o serial_pl011.o
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/drivers/serial_pl010.c b/drivers/serial/serial_pl010.c
index 417b6aeda6..417b6aeda6 100644
--- a/drivers/serial_pl010.c
+++ b/drivers/serial/serial_pl010.c
diff --git a/drivers/serial_pl011.c b/drivers/serial/serial_pl011.c
index 4d35fe5e9e..4d35fe5e9e 100644
--- a/drivers/serial_pl011.c
+++ b/drivers/serial/serial_pl011.c
diff --git a/drivers/serial_pl011.h b/drivers/serial/serial_pl011.h
index 5f20fdd108..5f20fdd108 100644
--- a/drivers/serial_pl011.h
+++ b/drivers/serial/serial_pl011.h
diff --git a/drivers/tsec.c b/drivers/tsec.c
index 4ff3339c7d..7ba8f0cace 100644
--- a/drivers/tsec.c
+++ b/drivers/tsec.c
@@ -803,6 +803,7 @@ static void startup_tsec(struct eth_device *dev)
/* Tell the DMA it is clear to go */
regs->dmactrl |= DMACTRL_INIT_SETTINGS;
regs->tstat = TSTAT_CLEAR_THALT;
+ regs->rstat = RSTAT_CLEAR_RHALT;
regs->dmactrl &= ~(DMACTRL_GRS | DMACTRL_GTS);
}
diff --git a/examples/mips.lds b/examples/mips.lds
index 9d9849bf5c..a7707287a2 100644
--- a/examples/mips.lds
+++ b/examples/mips.lds
@@ -39,14 +39,14 @@ SECTIONS
. = ALIGN(4);
.data : { *(.data) }
- . = ALIGN(4);
- .sdata : { *(.sdata) }
+ . = .;
+ _gp = ALIGN(16) + 0x7ff0;
- _gp = ALIGN(16);
-
- __got_start = .;
- .got : { *(.got) }
- __got_end = .;
+ .got : {
+ __got_start = .;
+ *(.got)
+ __got_end = .;
+ }
.sdata : { *(.sdata) }
diff --git a/include/asm-mips/addrspace.h b/include/asm-mips/addrspace.h
index b8214b1c85..0e6abd7d0f 100644
--- a/include/asm-mips/addrspace.h
+++ b/include/asm-mips/addrspace.h
@@ -49,7 +49,7 @@
cannot access physical memory directly from core */
#define UNCACHED_SDRAM(a) (((unsigned long)(a)) | 0x20000000)
#else /* !CONFIG_AU1X00 */
-#define UNCACHED_SDRAM(a) PHYSADDR(a)
+#define UNCACHED_SDRAM(a) KSEG1ADDR(a)
#endif /* CONFIG_AU1X00 */
#endif /* __ASSEMBLY__ */
/*
diff --git a/include/asm-mips/string.h b/include/asm-mips/string.h
index c42ad82c47..579a591e62 100644
--- a/include/asm-mips/string.h
+++ b/include/asm-mips/string.h
@@ -19,21 +19,21 @@
extern char *strcpy(char *__dest, __const__ char *__src);
#undef __HAVE_ARCH_STRNCPY
-extern char *strncpy(char *__dest, __const__ char *__src, size_t __n);
+extern char *strncpy(char *__dest, __const__ char *__src, __kernel_size_t __n);
#undef __HAVE_ARCH_STRCMP
extern int strcmp(__const__ char *__cs, __const__ char *__ct);
#undef __HAVE_ARCH_STRNCMP
-extern int strncmp(__const__ char *__cs, __const__ char *__ct, size_t __count);
+extern int strncmp(__const__ char *__cs, __const__ char *__ct, __kernel_size_t __count);
#undef __HAVE_ARCH_MEMSET
-extern void *memset(void *__s, int __c, size_t __count);
+extern void *memset(void *__s, int __c, __kernel_size_t __count);
#undef __HAVE_ARCH_MEMCPY
-extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
+extern void *memcpy(void *__to, __const__ void *__from, __kernel_size_t __n);
#undef __HAVE_ARCH_MEMMOVE
-extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
+extern void *memmove(void *__dest, __const__ void *__src, __kernel_size_t __n);
#endif /* _ASM_STRING_H */
diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h
index 48170e7a35..f5e1b646ca 100644
--- a/include/configs/M5253EVBE.h
+++ b/include/configs/M5253EVBE.h
@@ -146,7 +146,7 @@
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
#define CFG_SDRAM_BASE 0x00000000
-#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */
+#define CFG_SDRAM_SIZE 8 /* SDRAM size in MB */
#ifdef CONFIG_MONITOR_IS_IN_RAM
#define CFG_MONITOR_BASE 0x20000
diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h
index 3c17c1ea14..7bb9f60f76 100644
--- a/include/configs/M5282EVB.h
+++ b/include/configs/M5282EVB.h
@@ -163,7 +163,7 @@
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
#define CFG_SDRAM_BASE 0x00000000
-#define CFG_SDRAM_SIZE 8 /* SDRAM size in MB */
+#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */
#define CFG_FLASH_BASE 0xffe00000
#define CFG_INT_FLASH_BASE 0xf0000000
#define CFG_INT_FLASH_ENABLE 0x21
diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h
index d3b160505b..47d74a3c37 100644
--- a/include/configs/M5329EVB.h
+++ b/include/configs/M5329EVB.h
@@ -175,7 +175,7 @@
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
#define CFG_SDRAM_BASE 0x40000000
-#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */
+#define CFG_SDRAM_SIZE 32 /* SDRAM size in MB */
#define CFG_SDRAM_CFG1 0x53722730
#define CFG_SDRAM_CFG2 0x56670000
#define CFG_SDRAM_CTRL 0xE1092000
diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h
index 6f4859c238..ba050cb7e4 100644
--- a/include/configs/M54455EVB.h
+++ b/include/configs/M54455EVB.h
@@ -27,8 +27,8 @@
* board/config.h - configuration options, board specific
*/
-#ifndef _JAMICA54455_H
-#define _JAMICA54455_H
+#ifndef _M54455EVB_H
+#define _M54455EVB_H
/*
* High Level Configuration Options
@@ -75,7 +75,7 @@
#define CONFIG_CMD_MISC
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
-#define CONFIG_CMD_PCI
+#undef CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
@@ -129,8 +129,8 @@
"u-boot=u-boot.bin\0" \
"load=tftp ${loadaddr) ${u-boot}\0" \
"upd=run load; run prog\0" \
- "prog=prot off 0 2ffff;" \
- "era 0 2ffff;" \
+ "prog=prot off 4000000 402ffff;" \
+ "era 4000000 402ffff;" \
"cp.b ${loadaddr} 0 ${filesize};" \
"save\0" \
""
@@ -174,6 +174,7 @@
#define CFG_IMMR CFG_MBAR
/* PCI */
+#ifdef CONFIG_CMD_PCI
#define CONFIG_PCI 1
#define CFG_PCI_MEM_BUS 0xA0000000
@@ -187,6 +188,7 @@
#define CFG_PCI_CFG_BUS 0xB0000000
#define CFG_PCI_CFG_PHYS CFG_PCI_CFG_BUS
#define CFG_PCI_CFG_SIZE 0x01000000
+#endif
/* FPGA - Spartan 2 */
/* experiment
@@ -268,8 +270,6 @@
/* Configuration for environment
* Environment is embedded in u-boot in the second sector of the flash
*/
-#define CFG_ENV_OFFSET 0x4000
-#define CFG_ENV_SECT_SIZE 0x2000
#define CFG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_OVERWRITE 1
#undef CFG_ENV_IS_EMBEDDED
@@ -278,13 +278,17 @@
* FLASH organization
*/
#ifdef CFG_ATMEL_BOOT
-# define CFG_FLASH_BASE 0
+# define CFG_FLASH_BASE CFG_CS0_BASE
# define CFG_FLASH0_BASE CFG_CS0_BASE
# define CFG_FLASH1_BASE CFG_CS1_BASE
+# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x4000)
+# define CFG_ENV_SECT_SIZE 0x2000
#else
# define CFG_FLASH_BASE CFG_FLASH0_BASE
# define CFG_FLASH0_BASE CFG_CS1_BASE
# define CFG_FLASH1_BASE CFG_CS0_BASE
+# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x60000)
+# define CFG_ENV_SECT_SIZE 0x20000
#endif
/* M54455EVB has one non CFI flash, defined CFG_FLASH_CFI will cause the system
@@ -328,9 +332,9 @@
* NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
*/
#ifdef CFG_ATMEL_BOOT
-# define CONFIG_JFFS2_DEV "nor0"
+# define CONFIG_JFFS2_DEV "nor1"
# define CONFIG_JFFS2_PART_SIZE 0x01000000
-# define CONFIG_JFFS2_PART_OFFSET CFG_FLASH1_BASE
+# define CONFIG_JFFS2_PART_OFFSET (CFG_FLASH1_BASE + 0x500000)
#else
# define CONFIG_JFFS2_DEV "nor0"
# define CONFIG_JFFS2_PART_SIZE (0x01000000 - 0x500000)
@@ -356,20 +360,20 @@
#ifdef CFG_ATMEL_BOOT
/* Atmel Flash */
-#define CFG_CS0_BASE 0
+#define CFG_CS0_BASE 0x04000000
#define CFG_CS0_MASK 0x00070001
#define CFG_CS0_CTRL 0x00001140
/* Intel Flash */
-#define CFG_CS1_BASE 0x04000000
+#define CFG_CS1_BASE 0x00000000
#define CFG_CS1_MASK 0x01FF0001
-#define CFG_CS1_CTRL 0x003F3D60
+#define CFG_CS1_CTRL 0x00000D60
#define CFG_ATMEL_BASE CFG_CS0_BASE
#else
/* Intel Flash */
-#define CFG_CS0_BASE 0
+#define CFG_CS0_BASE 0x00000000
#define CFG_CS0_MASK 0x01FF0001
-#define CFG_CS0_CTRL 0x003F3D60
+#define CFG_CS0_CTRL 0x00000D60
/* Atmel Flash */
#define CFG_CS1_BASE 0x04000000
#define CFG_CS1_MASK 0x00070001
@@ -388,4 +392,4 @@
#define CFG_CS3_MASK 0x00070001
#define CFG_CS3_CTRL 0x00000020
-#endif /* _JAMICA54455_H */
+#endif /* _M54455EVB_H */
diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h
index 14b041e3ae..3659002d5e 100644
--- a/include/configs/MPC8266ADS.h
+++ b/include/configs/MPC8266ADS.h
@@ -146,37 +146,26 @@
/*
* Command line configuration.
*/
-#include <config_cmd_all.h>
-
-#undef CONFIG_CMD_BEDBUG
-#undef CONFIG_CMD_BMP
-#undef CONFIG_CMD_BSP
-#undef CONFIG_CMD_DATE
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_DISPLAY
-#undef CONFIG_CMD_DOC
-#undef CONFIG_CMD_DTT
-#undef CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_ELF
-#undef CONFIG_CMD_EXT2
-#undef CONFIG_CMD_FDC
-#undef CONFIG_CMD_FDOS
-#undef CONFIG_CMD_HWFLOW
-#undef CONFIG_CMD_IDE
-#undef CONFIG_CMD_JFFS2
-#undef CONFIG_CMD_KGDB
-#undef CONFIG_CMD_MFSL
-#undef CONFIG_CMD_MMC
-#undef CONFIG_CMD_NAND
-#undef CONFIG_CMD_PCMCIA
-#undef CONFIG_CMD_REISER
-#undef CONFIG_CMD_SCSI
-#undef CONFIG_CMD_SPI
-#undef CONFIG_CMD_SNTP
-#undef CONFIG_CMD_VFD
-#undef CONFIG_CMD_UNIVERSE
-#undef CONFIG_CMD_USB
-#undef CONFIG_CMD_XIMG
+#include <config_cmd_default.h>
+
+/* Commands we want, that are not part of default set */
+#define CONFIG_CMD_ASKENV /* ask for env variable */
+#define CONFIG_CMD_CACHE /* icache, dcache */
+#define CONFIG_CMD_DHCP /* DHCP Support */
+#define CONFIG_CMD_DIAG /* Diagnostics */
+#define CONFIG_CMD_IMMAP /* IMMR dump support */
+#define CONFIG_CMD_IRQ /* irqinfo */
+#define CONFIG_CMD_MII /* MII support */
+#define CONFIG_CMD_PCI /* pciinfo */
+#define CONFIG_CMD_PING /* ping support */
+#define CONFIG_CMD_PORTIO /* Port I/O */
+#define CONFIG_CMD_REGINFO /* Register dump */
+#define CONFIG_CMD_SAVES /* save S record dump */
+#define CONFIG_CMD_SDRAM /* SDRAM DIMM SPD info printout */
+
+/* Commands from default set we don't need */
+#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
+#undef CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
/* Define a command string that is automatically executed when no character
* is read on the console interface withing "Boot Delay" after reset.
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index 4e061bd9ff..8dda6651ef 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -316,6 +316,7 @@ extern unsigned long get_clock_freq(void);
#define OF_SOC "soc8541@e0000000"
#define OF_TBCLK (bd->bi_busfreq / 8)
#define OF_STDOUT_PATH "/soc8541@e0000000/serial@4600"
+#define OF_PCI "pci@e0008000"
/*
* I2C
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 6083715189..4edc7fd2b6 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -340,6 +340,7 @@ extern unsigned long get_clock_freq(void);
#define OF_SOC "soc8548@e0000000"
#define OF_TBCLK (bd->bi_busfreq / 8)
#define OF_STDOUT_PATH "/soc8548@e0000000/serial@4600"
+#define OF_PCI "pci@e0008000"
/*
* I2C
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 1d1b7c9079..c414bf033e 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -316,6 +316,7 @@ extern unsigned long get_clock_freq(void);
#define OF_SOC "soc8555@e0000000"
#define OF_TBCLK (bd->bi_busfreq / 8)
#define OF_STDOUT_PATH "/soc8555@e0000000/serial@4600"
+#define OF_PCI "pci@e0008000"
/*
* I2C
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index ba744e99f8..548e1582a8 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -297,7 +297,7 @@ extern unsigned long get_clock_freq(void);
#define OF_SOC "soc8568@e0000000"
#define OF_QE "qe@e0080000"
#define OF_TBCLK (bd->bi_busfreq / 8)
-#define OF_STDOUT_PATH "/soc8568@e0000000/serial@4600"
+#define OF_STDOUT_PATH "/soc8568@e0000000/serial@4500"
/*
* I2C
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index d55340404d..7ecc275a1c 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -257,8 +257,8 @@
"fdt_addr=FC0A0000\0" \
"kernel_addr=FC0C0000\0" \
"ramdisk_addr=FC300000\0" \
- "kernel_addr_r=200000\0" \
- "fdt_addr_r=400000\0" \
+ "kernel_addr_r=400000\0" \
+ "fdt_addr_r=600000\0" \
"rootpath=/opt/eldk/ppc_6xx\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
@@ -547,7 +547,7 @@
# if defined (CONFIG_TQM5200_REV100)
# error TQM5200 REV100 not supported on STK52XX REV200 or above
# else/* TQM5200 REV200 and above */
-# define CFG_GPS_PORT_CONFIG 0x91500004
+# define CFG_GPS_PORT_CONFIG 0x91500404
# endif
# endif
#elif defined (CONFIG_FO300)
diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h
index 684b86f2ef..fe3a2f020c 100644
--- a/include/configs/TQM860M.h
+++ b/include/configs/TQM860M.h
@@ -69,9 +69,14 @@
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
"bootfile=/tftpboot/TQM860M/uImage\0" \
- "fdt_addr=40080000\0" \
- "kernel_addr=400A0000\0" \
+ "fdt_addr=400C0000\0" \
+ "kernel_addr=40100000\0" \
"ramdisk_addr=40280000\0" \
+ "load=tftp 200000 ${u-boot}\0" \
+ "update=protect off 40000000 +${filesize};" \
+ "erase 40000000 +${filesize};" \
+ "cp.b 200000 40000000 ${filesize};" \
+ "protect on 40000000 +${filesize}\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@@ -172,7 +177,7 @@
#define CFG_FLASH_BASE 0x40000000
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CFG_MONITOR_BASE CFG_FLASH_BASE
-#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc() */
/*
* For booting Linux, the board info and command line data
@@ -193,7 +198,7 @@
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */
#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */
-#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */
+#define CFG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */
/* Address and size of Redundant Environment Sector */
#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h
index 0d778919a2..ca3c166524 100644
--- a/include/configs/TQM866M.h
+++ b/include/configs/TQM866M.h
@@ -81,9 +81,14 @@
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
"bootfile=/tftpboot/TQM866M/uImage\0" \
- "fdt_addr=40080000\0" \
- "kernel_addr=400A0000\0" \
+ "fdt_addr=400C0000\0" \
+ "kernel_addr=40100000\0" \
"ramdisk_addr=40280000\0" \
+ "load=tftp 200000 ${u-boot}\0" \
+ "update=protect off 40000000 +${filesize};" \
+ "erase 40000000 +${filesize};" \
+ "cp.b 200000 40000000 ${filesize};" \
+ "protect on 40000000 +${filesize}\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@@ -215,7 +220,7 @@
#define CFG_FLASH_BASE 0x40000000
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CFG_MONITOR_BASE CFG_FLASH_BASE
-#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc() */
/*
* For booting Linux, the board info and command line data
@@ -236,7 +241,7 @@
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */
#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */
-#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */
+#define CFG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */
/* Address and size of Redundant Environment Sector */
#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
@@ -421,26 +426,30 @@
#define CFG_PTA_PER_CLK ((4096 * 64 * 1000) / (4 * 64))
/*
- * Memory Periodic Timer Prescaler
- * Periodic timer for refresh, start with refresh rate for 40 MHz clock
- * (CFG_8xx_CPUCLK_MIN / CFG_PTA_PER_CLK)
+ * Periodic timer (MAMR[PTx]) for 4 * 7.8 us refresh (= 31.2 us per quad)
+ *
+ * CPUclock(MHz) * 31.2
+ * CFG_MAMR_PTA = ----------------------------------- with DFBRG = 0
+ * 2^(2*SCCR[DFBRG]) * MPTPR_PTP_DIV16
+ *
+ * CPU clock = 15 MHz: CFG_MAMR_PTA = 29 -> 4 * 7.73 us
+ * CPU clock = 50 MHz: CFG_MAMR_PTA = 97 -> 4 * 7.76 us
+ * CPU clock = 66 MHz: CFG_MAMR_PTA = 128 -> 4 * 7.75 us
+ * CPU clock = 133 MHz: CFG_MAMR_PTA = 255 -> 4 * 7.67 us
+ *
+ * Value 97 is for 4 * 7.8 us at 50 MHz. So the refresh cycle requirement will
+ * be met also in the default configuration, i.e. if environment variable
+ * 'cpuclk' is not set.
*/
-#define CFG_MAMR_PTA 39
+#define CFG_MAMR_PTA 97
/*
- * For 16 MBit, refresh rates could be 31.3 us
- * (= 64 ms / 2K = 125 / quad bursts).
- * For a simpler initialization, 15.6 us is used instead.
- *
- * #define CFG_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks
- * #define CFG_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank
+ * Memory Periodic Timer Prescaler Register (MPTPR) values.
*/
-#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
-#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
-#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
-#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
+/* 4 * 7.8 us refresh (= 31.2 us per quad) at 50 MHz and PTA = 97 */
+#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16
+/* 4 * 3.9 us refresh (= 15.6 us per quad) at 50 MHz and PTA = 97 */
+#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8
/*
* MAMR settings for SDRAM
diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index 1809fc5d86..b33e26fe01 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -114,15 +114,10 @@
#define CONFIG_AUTOBOOT_STOP_STR " "
/*
- * These are "locally administered ethernet addresses" generated by
- * ./tools/gen_eth_addr
- *
- * After booting the board for the first time, new addresses should be
- * generated and assigned to the environment variables "ethaddr" and
- * "eth1addr".
+ * After booting the board for the first time, new ethernet addresses
+ * should be generated and assigned to the environment variables
+ * "ethaddr" and "eth1addr". This is normally done during production.
*/
-#define CONFIG_ETHADDR 6a:87:71:14:cd:cb
-#define CONFIG_ETH1ADDR ca:f8:15:e6:3e:e6
#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
#define CONFIG_NET_MULTI 1
diff --git a/include/configs/delta.h b/include/configs/delta.h
index 09667edaa5..14fde1a957 100644
--- a/include/configs/delta.h
+++ b/include/configs/delta.h
@@ -123,6 +123,8 @@
#define CONFIG_USB_STORAGE 1
#define CONFIG_DOS_PARTITION 1
+#include <asm/arch/pxa-regs.h> /* for OHCI_REGS_BASE */
+
#undef CFG_USB_OHCI_BOARD_INIT
#define CFG_USB_OHCI_CPU_INIT 1
#define CFG_USB_OHCI_REGS_BASE OHCI_REGS_BASE
diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h
index 4adf254221..82fe19c725 100644
--- a/include/configs/lubbock.h
+++ b/include/configs/lubbock.h
@@ -42,6 +42,7 @@
#endif
#define CONFIG_MMC 1
#define BOARD_LATE_INIT 1
+#define CONFIG_DOS_PARTITION
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h
index 9a21632162..1503598166 100644
--- a/include/configs/motionpro.h
+++ b/include/configs/motionpro.h
@@ -163,9 +163,9 @@
/*
- * Clock configuration: SYS_XTALIN = 25MHz
+ * Clock configuration: SYS_XTALIN = 33MHz
*/
-#define CFG_MPC5XXX_CLKIN 25000000
+#define CFG_MPC5XXX_CLKIN 33000000
/*
@@ -211,7 +211,7 @@
#endif
#define CFG_MONITOR_LEN (256 << 10) /* 256 kB for Monitor */
-#define CFG_MALLOC_LEN (128 << 10) /* 128 kB for malloc() */
+#define CFG_MALLOC_LEN (1024 << 10) /* 1 MiB for malloc() */
#define CFG_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */
@@ -221,7 +221,7 @@
/* Boot Chipselect */
#define CFG_BOOTCS_START CFG_FLASH_BASE
#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
-#define CFG_BOOTCS_CFG 0x03035D00
+#define CFG_BOOTCS_CFG 0x00045D00
/* Flash memory addressing */
#define CFG_CS0_START CFG_FLASH_BASE
@@ -251,11 +251,11 @@
/*
* SDRAM configuration
*/
-/* 2 x MT48LC16M16A2BG-75 IT:D, CASL 2, 32 bit data bus */
-#define SDRAM_CONFIG1 0x52222600
-#define SDRAM_CONFIG2 0x88b70000
-#define SDRAM_CONTROL 0x50570000
-#define SDRAM_MODE 0x008d0000
+/* 2 x MT48LC16M16A2BG-75 IT:D, CASL 3, 32 bit data bus */
+#define SDRAM_CONFIG1 0x62322900
+#define SDRAM_CONFIG2 0x88c70000
+#define SDRAM_CONTROL 0x504f0000
+#define SDRAM_MODE 0x00cd0000
/*
@@ -267,7 +267,7 @@
#define CFG_FLASH_SIZE 0x01000000
#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */
#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
-#define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */
+#define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */
#define CONFIG_FLASH_16BIT /* Flash is 16-bit */
/*
@@ -277,8 +277,8 @@
#define MTDIDS_DEFAULT "nor0=motionpro-0"
#define MTDPARTS_DEFAULT "mtdparts=motionpro-0:" \
"13m(fs),2m(kernel),256k(uboot)," \
- "64k(env),64k(redund_env),64k(dtb)," \
- "-(user_data)"
+ "128k(env),128k(redund_env)," \
+ "128k(dtb),-(user_data)"
/*
* IDE/ATA configuration
@@ -356,7 +356,7 @@ extern void __led_set(led_id_t id, int state);
/* This has to be a multiple of the Flash sector size */
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
#define CFG_ENV_SIZE 0x1000
-#define CFG_ENV_SECT_SIZE 0x10000
+#define CFG_ENV_SECT_SIZE 0x20000
/* Configuration of redundant environment */
#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
@@ -394,7 +394,8 @@ extern void __led_set(led_id_t id, int state);
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
-#define CFG_MEMTEST_END 0x03f00000 /* 1 ... 64 MiB in DRAM */
+#define CFG_MEMTEST_END 0x03e00000 /* 1 ... 62 MiB in DRAM */
+#define CFG_ALT_MEMTEST
#define CFG_LOAD_ADDR 0x200000 /* default kernel load addr */
diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h
index 0e884fc114..4a9cadbc73 100644
--- a/include/configs/pxa255_idp.h
+++ b/include/configs/pxa255_idp.h
@@ -38,10 +38,11 @@
#include <asm/arch/pxa-regs.h>
/*
- * If we are developing, we might want to start armboot from ram
+ * If we are developing, we might want to start U-Boot from RAM
* so we MUST NOT initialize critical regs like mem-timing ...
*/
-#define CONFIG_INIT_CRITICAL /* undef for developing */
+#undef CONFIG_SKIP_LOWLEVEL_INIT /* define for developing */
+#undef CONFIG_SKIP_RELOCATE_UBOOT /* define for developing */
/*
* define the following to enable debug blinks. A debug blink function
@@ -62,6 +63,7 @@
#endif
#define CONFIG_MMC 1
+#define CONFIG_DOS_PARTITION 1
#define BOARD_LATE_INIT 1
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
@@ -121,7 +123,6 @@
#define CONFIG_CMD_FAT
#define CONFIG_CMD_DHCP
-
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTCOMMAND "bootm 40000"
#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200"
@@ -332,7 +333,7 @@
#define CFG_FLASH_CFI_DRIVER 1
#define CFG_MONITOR_BASE 0
-#define CFG_MONITOR_LEN 0x40000
+#define CFG_MONITOR_LEN PHYS_FLASH_SECT_SIZE
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
@@ -347,7 +348,7 @@
#define CFG_ENV_IS_IN_FLASH 1
/* Addr of Environment Sector */
#define CFG_ENV_ADDR (PHYS_FLASH_1 + PHYS_FLASH_SIZE - 0x40000)
-#define CFG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */
-#define CFG_ENV_SECT_SIZE 0x40000
+#define CFG_ENV_SIZE PHYS_FLASH_SECT_SIZE /* Total Size of Environment Sector */
+#define CFG_ENV_SECT_SIZE (PHYS_FLASH_SECT_SIZE / 16)
#endif /* __CONFIG_H */
diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h
index 5733933d61..766617e075 100644
--- a/include/configs/xsengine.h
+++ b/include/configs/xsengine.h
@@ -32,6 +32,7 @@
#define CONFIG_PXA250 1 /* This is an PXA250 CPU */
#define CONFIG_XSENGINE 1
#define CONFIG_MMC 1
+#define CONFIG_DOS_PARTITION 1
#define BOARD_POST_INIT 1
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */
diff --git a/include/part.h b/include/part.h
index 29c03205f2..37b2b6845b 100644
--- a/include/part.h
+++ b/include/part.h
@@ -38,9 +38,9 @@ typedef struct block_dev_desc {
#endif
lbaint_t lba; /* number of blocks */
unsigned long blksz; /* block size */
- unsigned char vendor [40+1]; /* IDE model, SCSI Vendor */
- unsigned char product[20+1]; /* IDE Serial no, SCSI product */
- unsigned char revision[8+1]; /* firmware revision */
+ char vendor [40+1]; /* IDE model, SCSI Vendor */
+ char product[20+1]; /* IDE Serial no, SCSI product */
+ char revision[8+1]; /* firmware revision */
unsigned long (*block_read)(int dev,
unsigned long start,
lbaint_t blkcnt,
diff --git a/lib_m68k/m68k_linux.c b/lib_m68k/m68k_linux.c
index bea97441b1..cc974c2d60 100644
--- a/lib_m68k/m68k_linux.c
+++ b/lib_m68k/m68k_linux.c
@@ -26,6 +26,7 @@
#include <image.h>
#include <zlib.h>
#include <bzlib.h>
+#include <watchdog.h>
#include <environment.h>
#include <asm/byteorder.h>
@@ -36,6 +37,8 @@ DECLARE_GLOBAL_DATA_PTR;
#define LINUX_MAX_ENVS 256
#define LINUX_MAX_ARGS 256
+#define CHUNKSZ (64 * 1024)
+
#ifdef CONFIG_SHOW_BOOT_PROGRESS
# include <status_led.h>
# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
diff --git a/mips_config.mk b/mips_config.mk
index d8aa5fa777..67fb67d291 100644
--- a/mips_config.mk
+++ b/mips_config.mk
@@ -22,3 +22,28 @@
#
PLATFORM_CPPFLAGS += -DCONFIG_MIPS -D__MIPS__
+
+#
+# From Linux arch/mips/Makefile
+#
+# GCC uses -G 0 -mabicalls -fpic as default. We don't want PIC in the kernel
+# code since it only slows down the whole thing. At some point we might make
+# use of global pointer optimizations but their use of $28 conflicts with
+# the current pointer optimization.
+#
+# The DECStation requires an ECOFF kernel for remote booting, other MIPS
+# machines may also. Since BFD is incredibly buggy with respect to
+# crossformat linking we rely on the elf2ecoff tool for format conversion.
+#
+# cflags-y += -G 0 -mno-abicalls -fno-pic -pipe
+# cflags-y += -msoft-float
+# LDFLAGS_vmlinux += -G 0 -static -n -nostdlib
+# MODFLAGS += -mlong-calls
+#
+
+#
+# Meanwhile, U-Boot rely on PIC. We add proper switches explicitly.
+#
+PLATFORM_CPPFLAGS += -G 0 -mabicalls -fpic -pipe
+PLATFORM_CPPFLAGS += -msoft-float
+PLATFORM_LDFLAGS += -G 0 -static -n -nostdlib
diff --git a/net/bootp.c b/net/bootp.c
index 749d3e5e0c..cfe6f8dd6b 100644
--- a/net/bootp.c
+++ b/net/bootp.c
@@ -850,9 +850,9 @@ static void DhcpSendRequestPkt(Bootp_t *bp_offer)
bp->bp_hlen = HWL_ETHER;
bp->bp_hops = 0;
bp->bp_secs = htons(get_timer(0) / CFG_HZ);
- NetCopyIP(&bp->bp_ciaddr, &bp_offer->bp_ciaddr); /* both in network byte order */
- NetCopyIP(&bp->bp_yiaddr, &bp_offer->bp_yiaddr);
- NetCopyIP(&bp->bp_siaddr, &bp_offer->bp_siaddr);
+ /* Do not set the client IP, your IP, or server IP yet, since it hasn't been ACK'ed by
+ * the server yet */
+
/*
* RFC3046 requires Relay Agents to discard packets with
* nonzero and offered giaddr
@@ -870,7 +870,9 @@ static void DhcpSendRequestPkt(Bootp_t *bp_offer)
/*
* Copy options from OFFER packet if present
*/
- NetCopyIP(&OfferedIP, &bp->bp_yiaddr);
+
+ /* Copy offered IP into the parameters request list */
+ NetCopyIP(&OfferedIP, &bp_offer->bp_yiaddr);
extlen = DhcpExtended((u8 *)bp->bp_vend, DHCP_REQUEST, NetDHCPServerIP, OfferedIP);
pktlen = BOOTP_SIZE - sizeof(bp->bp_vend) + extlen;
@@ -980,3 +982,4 @@ void DhcpRequest(void)
#endif
#endif
+
OpenPOWER on IntegriCloud