20 files changed, 1055 insertions, 73 deletions

diff --git a/arch/arm/cpu/armv7/zynq/Makefile b/arch/arm/cpu/armv7/zynq/Makefile
index d382d49eb0..3363a3c71b 100644
--- a/arch/arm/cpu/armv7/zynq/Makefile
+++ b/arch/arm/cpu/armv7/zynq/Makefile
@@ -12,3 +12,5 @@ obj-y	:= timer.o
 obj-y	+= cpu.o
 obj-y	+= ddrc.o
 obj-y	+= slcr.o
+obj-y	+= clk.o
+obj-$(CONFIG_SPL_BUILD)	+= spl.o
diff --git a/arch/arm/cpu/armv7/zynq/clk.c b/arch/arm/cpu/armv7/zynq/clk.c
new file mode 100644
index 0000000000..d2885dc2b9
--- /dev/null
+++ b/arch/arm/cpu/armv7/zynq/clk.c
@@ -0,0 +1,664 @@
+/*
+ * Copyright (C) 2013 Soren Brinkmann <soren.brinkmann@xilinx.com>
+ * Copyright (C) 2013 Xilinx, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <common.h>
+#include <errno.h>
+#include <clk.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/clk.h>
+
+/* Board oscillator frequency */
+#ifndef CONFIG_ZYNQ_PS_CLK_FREQ
+# define CONFIG_ZYNQ_PS_CLK_FREQ	33333333UL
+#endif
+
+/* Register bitfield defines */
+#define PLLCTRL_FBDIV_MASK	0x7f000
+#define PLLCTRL_FBDIV_SHIFT	12
+#define PLLCTRL_BPFORCE_MASK	(1 << 4)
+#define PLLCTRL_PWRDWN_MASK	2
+#define PLLCTRL_PWRDWN_SHIFT	1
+#define PLLCTRL_RESET_MASK	1
+#define PLLCTRL_RESET_SHIFT	0
+
+#define ZYNQ_CLK_MAXDIV		0x3f
+#define CLK_CTRL_DIV1_SHIFT	20
+#define CLK_CTRL_DIV1_MASK	(ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV1_SHIFT)
+#define CLK_CTRL_DIV0_SHIFT	8
+#define CLK_CTRL_DIV0_MASK	(ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV0_SHIFT)
+#define CLK_CTRL_SRCSEL_SHIFT	4
+#define CLK_CTRL_SRCSEL_MASK	(0x3 << CLK_CTRL_SRCSEL_SHIFT)
+
+#define CLK_CTRL_DIV2X_SHIFT	26
+#define CLK_CTRL_DIV2X_MASK	(ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV2X_SHIFT)
+#define CLK_CTRL_DIV3X_SHIFT	20
+#define CLK_CTRL_DIV3X_MASK	(ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV3X_SHIFT)
+
+#define ZYNQ_CLKMUX_SEL_0	0
+#define ZYNQ_CLKMUX_SEL_1	1
+#define ZYNQ_CLKMUX_SEL_2	2
+#define ZYNQ_CLKMUX_SEL_3	3
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct clk;
+
+/**
+ * struct clk_ops:
+ * @set_rate:	Function pointer to set_rate() implementation
+ * @get_rate:	Function pointer to get_rate() implementation
+ */
+struct clk_ops {
+	int (*set_rate)(struct clk *clk, unsigned long rate);
+	unsigned long (*get_rate)(struct clk *clk);
+};
+
+/**
+ * struct clk:
+ * @name:	Clock name
+ * @frequency:	Currenct frequency
+ * @parent:	Parent clock
+ * @flags:	Clock flags
+ * @reg:	Clock control register
+ * @ops:	Clock operations
+ */
+struct clk {
+	char		*name;
+	unsigned long	frequency;
+	enum zynq_clk	parent;
+	unsigned int	flags;
+	u32		*reg;
+	struct clk_ops	ops;
+};
+#define ZYNQ_CLK_FLAGS_HAS_2_DIVS	1
+
+static struct clk clks[clk_max];
+
+/**
+ * __zynq_clk_cpu_get_parent() - Decode clock multiplexer
+ * @srcsel:	Mux select value
+ * Returns the clock identifier associated with the selected mux input.
+ */
+static int __zynq_clk_cpu_get_parent(unsigned int srcsel)
+{
+	unsigned int ret;
+
+	switch (srcsel) {
+	case ZYNQ_CLKMUX_SEL_0:
+	case ZYNQ_CLKMUX_SEL_1:
+		ret = armpll_clk;
+		break;
+	case ZYNQ_CLKMUX_SEL_2:
+		ret = ddrpll_clk;
+		break;
+	case ZYNQ_CLKMUX_SEL_3:
+		ret = iopll_clk;
+		break;
+	default:
+		ret = armpll_clk;
+		break;
+	}
+
+	return ret;
+}
+
+/**
+ * ddr2x_get_rate() - Get clock rate of DDR2x clock
+ * @clk:	Clock handle
+ * Returns the current clock rate of @clk.
+ */
+static unsigned long ddr2x_get_rate(struct clk *clk)
+{
+	u32 clk_ctrl = readl(clk->reg);
+	u32 div = (clk_ctrl & CLK_CTRL_DIV2X_MASK) >> CLK_CTRL_DIV2X_SHIFT;
+
+	return DIV_ROUND_CLOSEST(zynq_clk_get_rate(clk->parent), div);
+}
+
+/**
+ * ddr3x_get_rate() - Get clock rate of DDR3x clock
+ * @clk:	Clock handle
+ * Returns the current clock rate of @clk.
+ */
+static unsigned long ddr3x_get_rate(struct clk *clk)
+{
+	u32 clk_ctrl = readl(clk->reg);
+	u32 div = (clk_ctrl & CLK_CTRL_DIV3X_MASK) >> CLK_CTRL_DIV3X_SHIFT;
+
+	return DIV_ROUND_CLOSEST(zynq_clk_get_rate(clk->parent), div);
+}
+
+static void init_ddr_clocks(void)
+{
+	u32 div0, div1;
+	unsigned long prate = zynq_clk_get_rate(ddrpll_clk);
+	u32 clk_ctrl = readl(&slcr_base->ddr_clk_ctrl);
+
+	/* DDR2x */
+	clks[ddr2x_clk].reg = &slcr_base->ddr_clk_ctrl;
+	clks[ddr2x_clk].parent = ddrpll_clk;
+	clks[ddr2x_clk].name = "ddr_2x";
+	clks[ddr2x_clk].frequency = ddr2x_get_rate(&clks[ddr2x_clk]);
+	clks[ddr2x_clk].ops.get_rate = ddr2x_get_rate;
+
+	/* DDR3x */
+	clks[ddr3x_clk].reg = &slcr_base->ddr_clk_ctrl;
+	clks[ddr3x_clk].parent = ddrpll_clk;
+	clks[ddr3x_clk].name = "ddr_3x";
+	clks[ddr3x_clk].frequency = ddr3x_get_rate(&clks[ddr3x_clk]);
+	clks[ddr3x_clk].ops.get_rate = ddr3x_get_rate;
+
+	/* DCI */
+	clk_ctrl = readl(&slcr_base->dci_clk_ctrl);
+	div0 = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
+	div1 = (clk_ctrl & CLK_CTRL_DIV1_MASK) >> CLK_CTRL_DIV1_SHIFT;
+	clks[dci_clk].reg = &slcr_base->dci_clk_ctrl;
+	clks[dci_clk].parent = ddrpll_clk;
+	clks[dci_clk].frequency = DIV_ROUND_CLOSEST(
+			DIV_ROUND_CLOSEST(prate, div0), div1);
+	clks[dci_clk].name = "dci";
+
+	gd->bd->bi_ddr_freq = clks[ddr3x_clk].frequency / 1000000;
+}
+
+static void init_cpu_clocks(void)
+{
+	int clk_621;
+	u32 reg, div, srcsel;
+	enum zynq_clk parent;
+
+	reg = readl(&slcr_base->arm_clk_ctrl);
+	clk_621 = readl(&slcr_base->clk_621_true) & 1;
+	div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
+	srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
+	parent = __zynq_clk_cpu_get_parent(srcsel);
+
+	/* cpu clocks */
+	clks[cpu_6or4x_clk].reg = &slcr_base->arm_clk_ctrl;
+	clks[cpu_6or4x_clk].parent = parent;
+	clks[cpu_6or4x_clk].frequency = DIV_ROUND_CLOSEST(
+			zynq_clk_get_rate(parent), div);
+	clks[cpu_6or4x_clk].name = "cpu_6or4x";
+
+	clks[cpu_3or2x_clk].reg = &slcr_base->arm_clk_ctrl;
+	clks[cpu_3or2x_clk].parent = cpu_6or4x_clk;
+	clks[cpu_3or2x_clk].frequency = zynq_clk_get_rate(cpu_6or4x_clk) / 2;
+	clks[cpu_3or2x_clk].name = "cpu_3or2x";
+
+	clks[cpu_2x_clk].reg = &slcr_base->arm_clk_ctrl;
+	clks[cpu_2x_clk].parent = cpu_6or4x_clk;
+	clks[cpu_2x_clk].frequency = zynq_clk_get_rate(cpu_6or4x_clk) /
+			(2 + clk_621);
+	clks[cpu_2x_clk].name = "cpu_2x";
+
+	clks[cpu_1x_clk].reg = &slcr_base->arm_clk_ctrl;
+	clks[cpu_1x_clk].parent = cpu_6or4x_clk;
+	clks[cpu_1x_clk].frequency = zynq_clk_get_rate(cpu_6or4x_clk) /
+			(4 + 2 * clk_621);
+	clks[cpu_1x_clk].name = "cpu_1x";
+}
+
+/**
+ * periph_calc_two_divs() - Calculate clock dividers
+ * @cur_rate:	Current clock rate
+ * @tgt_rate:	Target clock rate
+ * @prate:	Parent clock rate
+ * @div0:	First divider (output)
+ * @div1:	Second divider (output)
+ * Returns the actual clock rate possible.
+ *
+ * Calculates clock dividers for clocks with two 6-bit dividers.
+ */
+static unsigned long periph_calc_two_divs(unsigned long cur_rate,
+		unsigned long tgt_rate, unsigned long prate, u32 *div0,
+		u32 *div1)
+{
+	long err, best_err = (long)(~0UL >> 1);
+	unsigned long rate, best_rate = 0;
+	u32 d0, d1;
+
+	for (d0 = 1; d0 <= ZYNQ_CLK_MAXDIV; d0++) {
+		for (d1 = 1; d1 <= ZYNQ_CLK_MAXDIV >> 1; d1++) {
+			rate = DIV_ROUND_CLOSEST(DIV_ROUND_CLOSEST(prate, d0),
+					d1);
+			err = abs(rate - tgt_rate);
+
+			if (err < best_err) {
+				*div0 = d0;
+				*div1 = d1;
+				best_err = err;
+				best_rate = rate;
+			}
+		}
+	}
+
+	return best_rate;
+}
+
+/**
+ * zynq_clk_periph_set_rate() - Set clock rate
+ * @clk:	Handle of the peripheral clock
+ * @rate:	New clock rate
+ * Sets the clock frequency of @clk to @rate. Returns zero on success.
+ */
+static int zynq_clk_periph_set_rate(struct clk *clk,
+		unsigned long rate)
+{
+	u32 ctrl, div0 = 0, div1 = 0;
+	unsigned long prate, new_rate, cur_rate = clk->frequency;
+
+	ctrl = readl(clk->reg);
+	prate = zynq_clk_get_rate(clk->parent);
+	ctrl &= ~CLK_CTRL_DIV0_MASK;
+
+	if (clk->flags & ZYNQ_CLK_FLAGS_HAS_2_DIVS) {
+		ctrl &= ~CLK_CTRL_DIV1_MASK;
+		new_rate = periph_calc_two_divs(cur_rate, rate, prate, &div0,
+				&div1);
+		ctrl |= div1 << CLK_CTRL_DIV1_SHIFT;
+	} else {
+		div0 = DIV_ROUND_CLOSEST(prate, rate);
+		div0 &= ZYNQ_CLK_MAXDIV;
+		new_rate = DIV_ROUND_CLOSEST(rate, div0);
+	}
+
+	/* write new divs to hardware */
+	ctrl |= div0 << CLK_CTRL_DIV0_SHIFT;
+	writel(ctrl, clk->reg);
+
+	/* update frequency in clk framework */
+	clk->frequency = new_rate;
+
+	return 0;
+}
+
+/**
+ * zynq_clk_periph_get_rate() - Get clock rate
+ * @clk:	Handle of the peripheral clock
+ * Returns the current clock rate of @clk.
+ */
+static unsigned long zynq_clk_periph_get_rate(struct clk *clk)
+{
+	u32 clk_ctrl = readl(clk->reg);
+	u32 div0 = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
+	u32 div1 = 1;
+
+	if (clk->flags & ZYNQ_CLK_FLAGS_HAS_2_DIVS)
+		div1 = (clk_ctrl & CLK_CTRL_DIV1_MASK) >> CLK_CTRL_DIV1_SHIFT;
+
+	/* a register value of zero == division by 1 */
+	if (!div0)
+		div0 = 1;
+	if (!div1)
+		div1 = 1;
+
+	return
+		DIV_ROUND_CLOSEST(
+			DIV_ROUND_CLOSEST(zynq_clk_get_rate(clk->parent), div0),
+			div1);
+}
+
+/**
+ * __zynq_clk_periph_get_parent() - Decode clock multiplexer
+ * @srcsel:	Mux select value
+ * Returns the clock identifier associated with the selected mux input.
+ */
+static enum zynq_clk __zynq_clk_periph_get_parent(u32 srcsel)
+{
+	switch (srcsel) {
+	case ZYNQ_CLKMUX_SEL_0:
+	case ZYNQ_CLKMUX_SEL_1:
+		return iopll_clk;
+	case ZYNQ_CLKMUX_SEL_2:
+		return armpll_clk;
+	case ZYNQ_CLKMUX_SEL_3:
+		return ddrpll_clk;
+	default:
+		return 0;
+	}
+}
+
+/**
+ * zynq_clk_periph_get_parent() - Decode clock multiplexer
+ * @clk:	Clock handle
+ * Returns the clock identifier associated with the selected mux input.
+ */
+static enum zynq_clk zynq_clk_periph_get_parent(struct clk *clk)
+{
+	u32 clk_ctrl = readl(clk->reg);
+	u32 srcsel = (clk_ctrl & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
+
+	return __zynq_clk_periph_get_parent(srcsel);
+}
+
+/**
+ * zynq_clk_register_periph_clk() - Set up a peripheral clock with the framework
+ * @clk:	Pointer to struct clk for the clock
+ * @ctrl:	Clock control register
+ * @name:	PLL name
+ * @two_divs:	Indicates whether the clock features one or two dividers
+ */
+static int zynq_clk_register_periph_clk(struct clk *clk, u32 *ctrl, char *name,
+		bool two_divs)
+{
+	clk->name = name;
+	clk->reg = ctrl;
+	if (two_divs)
+		clk->flags = ZYNQ_CLK_FLAGS_HAS_2_DIVS;
+	clk->parent = zynq_clk_periph_get_parent(clk);
+	clk->frequency = zynq_clk_periph_get_rate(clk);
+	clk->ops.get_rate = zynq_clk_periph_get_rate;
+	clk->ops.set_rate = zynq_clk_periph_set_rate;
+
+	return 0;
+}
+
+static void init_periph_clocks(void)
+{
+	zynq_clk_register_periph_clk(&clks[gem0_clk], &slcr_base->gem0_clk_ctrl,
+				     "gem0", 1);
+	zynq_clk_register_periph_clk(&clks[gem1_clk], &slcr_base->gem1_clk_ctrl,
+				     "gem1", 1);
+
+	zynq_clk_register_periph_clk(&clks[smc_clk], &slcr_base->smc_clk_ctrl,
+				     "smc", 0);
+
+	zynq_clk_register_periph_clk(&clks[lqspi_clk],
+				     &slcr_base->lqspi_clk_ctrl, "lqspi", 0);
+
+	zynq_clk_register_periph_clk(&clks[sdio0_clk],
+				     &slcr_base->sdio_clk_ctrl, "sdio0", 0);
+	zynq_clk_register_periph_clk(&clks[sdio1_clk],
+				     &slcr_base->sdio_clk_ctrl, "sdio1", 0);
+
+	zynq_clk_register_periph_clk(&clks[spi0_clk], &slcr_base->spi_clk_ctrl,
+				     "spi0", 0);
+	zynq_clk_register_periph_clk(&clks[spi1_clk], &slcr_base->spi_clk_ctrl,
+				     "spi1", 0);
+
+	zynq_clk_register_periph_clk(&clks[uart0_clk],
+				     &slcr_base->uart_clk_ctrl, "uart0", 0);
+	zynq_clk_register_periph_clk(&clks[uart1_clk],
+				     &slcr_base->uart_clk_ctrl, "uart1", 0);
+
+	zynq_clk_register_periph_clk(&clks[dbg_trc_clk],
+				     &slcr_base->dbg_clk_ctrl, "dbg_trc", 0);
+	zynq_clk_register_periph_clk(&clks[dbg_apb_clk],
+				     &slcr_base->dbg_clk_ctrl, "dbg_apb", 0);
+
+	zynq_clk_register_periph_clk(&clks[pcap_clk],
+				     &slcr_base->pcap_clk_ctrl, "pcap", 0);
+
+	zynq_clk_register_periph_clk(&clks[fclk0_clk],
+				     &slcr_base->fpga0_clk_ctrl, "fclk0", 1);
+	zynq_clk_register_periph_clk(&clks[fclk1_clk],
+				     &slcr_base->fpga1_clk_ctrl, "fclk1", 1);
+	zynq_clk_register_periph_clk(&clks[fclk2_clk],
+				     &slcr_base->fpga2_clk_ctrl, "fclk2", 1);
+	zynq_clk_register_periph_clk(&clks[fclk3_clk],
+				     &slcr_base->fpga3_clk_ctrl, "fclk3", 1);
+}
+
+/**
+ * zynq_clk_register_aper_clk() - Set up a APER clock with the framework
+ * @clk:	Pointer to struct clk for the clock
+ * @ctrl:	Clock control register
+ * @name:	PLL name
+ */
+static void zynq_clk_register_aper_clk(struct clk *clk, u32 *ctrl, char *name)
+{
+	clk->name = name;
+	clk->reg = ctrl;
+	clk->parent = cpu_1x_clk;
+	clk->frequency = zynq_clk_get_rate(clk->parent);
+}
+
+static void init_aper_clocks(void)
+{
+	zynq_clk_register_aper_clk(&clks[usb0_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "usb0_aper");
+	zynq_clk_register_aper_clk(&clks[usb1_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "usb1_aper");
+
+	zynq_clk_register_aper_clk(&clks[gem0_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "gem0_aper");
+	zynq_clk_register_aper_clk(&clks[gem1_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "gem1_aper");
+
+	zynq_clk_register_aper_clk(&clks[sdio0_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "sdio0_aper");
+	zynq_clk_register_aper_clk(&clks[sdio1_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "sdio1_aper");
+
+	zynq_clk_register_aper_clk(&clks[spi0_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "spi0_aper");
+	zynq_clk_register_aper_clk(&clks[spi1_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "spi1_aper");
+
+	zynq_clk_register_aper_clk(&clks[can0_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "can0_aper");
+	zynq_clk_register_aper_clk(&clks[can1_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "can1_aper");
+
+	zynq_clk_register_aper_clk(&clks[i2c0_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "i2c0_aper");
+	zynq_clk_register_aper_clk(&clks[i2c1_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "i2c1_aper");
+
+	zynq_clk_register_aper_clk(&clks[uart0_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "uart0_aper");
+	zynq_clk_register_aper_clk(&clks[uart1_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "uart1_aper");
+
+	zynq_clk_register_aper_clk(&clks[gpio_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "gpio_aper");
+
+	zynq_clk_register_aper_clk(&clks[lqspi_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "lqspi_aper");
+
+	zynq_clk_register_aper_clk(&clks[smc_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "smc_aper");
+}
+
+/**
+ * __zynq_clk_pll_get_rate() - Get PLL rate
+ * @addr:	Address of the PLL's control register
+ * Returns the current PLL output rate.
+ */
+static unsigned long __zynq_clk_pll_get_rate(u32 *addr)
+{
+	u32 reg, mul, bypass;
+
+	reg = readl(addr);
+	bypass = reg & PLLCTRL_BPFORCE_MASK;
+	if (bypass)
+		mul = 1;
+	else
+		mul = (reg & PLLCTRL_FBDIV_MASK) >> PLLCTRL_FBDIV_SHIFT;
+
+	return CONFIG_ZYNQ_PS_CLK_FREQ * mul;
+}
+
+/**
+ * zynq_clk_pll_get_rate() - Get PLL rate
+ * @pll:	Handle of the PLL
+ * Returns the current clock rate of @pll.
+ */
+static unsigned long zynq_clk_pll_get_rate(struct clk *pll)
+{
+	return __zynq_clk_pll_get_rate(pll->reg);
+}
+
+/**
+ * zynq_clk_register_pll() - Set up a PLL with the framework
+ * @clk:	Pointer to struct clk for the PLL
+ * @ctrl:	PLL control register
+ * @name:	PLL name
+ * @prate:	PLL input clock rate
+ */
+static void zynq_clk_register_pll(struct clk *clk, u32 *ctrl, char *name,
+		unsigned long prate)
+{
+	clk->name = name;
+	clk->reg = ctrl;
+	clk->frequency = zynq_clk_pll_get_rate(clk);
+	clk->ops.get_rate = zynq_clk_pll_get_rate;
+}
+
+/**
+ * clkid_2_register() - Get clock control register
+ * @id:	Clock identifier of one of the PLLs
+ * Returns the address of the requested PLL's control register.
+ */
+static u32 *clkid_2_register(enum zynq_clk id)
+{
+	switch (id) {
+	case armpll_clk:
+		return &slcr_base->arm_pll_ctrl;
+	case ddrpll_clk:
+		return &slcr_base->ddr_pll_ctrl;
+	case iopll_clk:
+		return &slcr_base->io_pll_ctrl;
+	default:
+		return &slcr_base->io_pll_ctrl;
+	}
+}
+
+/* API */
+/**
+ * zynq_clk_early_init() - Early init for the clock framework
+ *
+ * This function is called from before relocation and sets up the CPU clock
+ * frequency in the global data struct.
+ */
+void zynq_clk_early_init(void)
+{
+	u32 reg = readl(&slcr_base->arm_clk_ctrl);
+	u32 div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
+	u32 srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
+	enum zynq_clk parent = __zynq_clk_cpu_get_parent(srcsel);
+	u32 *pllreg = clkid_2_register(parent);
+	unsigned long prate = __zynq_clk_pll_get_rate(pllreg);
+
+	if (!div)
+		div = 1;
+
+	gd->cpu_clk = DIV_ROUND_CLOSEST(prate, div);
+}
+
+/**
+ * get_uart_clk() - Get UART input frequency
+ * @dev_index:	UART ID
+ * Returns UART input clock frequency in Hz.
+ *
+ * Compared to zynq_clk_get_rate() this function is designed to work before
+ * relocation and can be called when the serial UART is set up.
+ */
+unsigned long get_uart_clk(int dev_index)
+{
+	u32 reg = readl(&slcr_base->uart_clk_ctrl);
+	u32 div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
+	u32 srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
+	enum zynq_clk parent = __zynq_clk_periph_get_parent(srcsel);
+	u32 *pllreg = clkid_2_register(parent);
+	unsigned long prate = __zynq_clk_pll_get_rate(pllreg);
+
+	if (!div)
+		div = 1;
+
+	return DIV_ROUND_CLOSEST(prate, div);
+}
+
+/**
+ * set_cpu_clk_info() - Initialize clock framework
+ * Always returns zero.
+ *
+ * This function is called from common code after relocation and sets up the
+ * clock framework. The framework must not be used before this function had been
+ * called.
+ */
+int set_cpu_clk_info(void)
+{
+	zynq_clk_register_pll(&clks[armpll_clk], &slcr_base->arm_pll_ctrl,
+			      "armpll", CONFIG_ZYNQ_PS_CLK_FREQ);
+	zynq_clk_register_pll(&clks[ddrpll_clk], &slcr_base->ddr_pll_ctrl,
+			      "ddrpll", CONFIG_ZYNQ_PS_CLK_FREQ);
+	zynq_clk_register_pll(&clks[iopll_clk], &slcr_base->io_pll_ctrl,
+			      "iopll", CONFIG_ZYNQ_PS_CLK_FREQ);
+
+	init_ddr_clocks();
+	init_cpu_clocks();
+	init_periph_clocks();
+	init_aper_clocks();
+
+	gd->bd->bi_arm_freq = gd->cpu_clk / 1000000;
+	gd->bd->bi_dsp_freq = 0;
+
+	return 0;
+}
+
+/**
+ * zynq_clk_get_rate() - Get clock rate
+ * @clk:	Clock identifier
+ * Returns the current clock rate of @clk on success or zero for an invalid
+ * clock id.
+ */
+unsigned long zynq_clk_get_rate(enum zynq_clk clk)
+{
+	if (clk < 0 || clk >= clk_max)
+		return 0;
+
+	return clks[clk].frequency;
+}
+
+/**
+ * zynq_clk_set_rate() - Set clock rate
+ * @clk:	Clock identifier
+ * @rate:	Requested clock rate
+ * Passes on the return value from the clock's set_rate() function or negative
+ * errno.
+ */
+int zynq_clk_set_rate(enum zynq_clk clk, unsigned long rate)
+{
+	if (clk < 0 || clk >= clk_max)
+		return -ENODEV;
+
+	if (clks[clk].ops.set_rate)
+		return clks[clk].ops.set_rate(&clks[clk], rate);
+
+	return -ENXIO;
+}
+
+/**
+ * zynq_clk_get_name() - Get clock name
+ * @clk:	Clock identifier
+ * Returns the name of @clk.
+ */
+const char *zynq_clk_get_name(enum zynq_clk clk)
+{
+	return clks[clk].name;
+}
+
+/**
+ * soc_clk_dump() - Print clock frequencies
+ * Returns zero on success
+ *
+ * Implementation for the clk dump command.
+ */
+int soc_clk_dump(void)
+{
+	int i;
+
+	printf("clk\t\tfrequency\n");
+	for (i = 0; i < clk_max; i++) {
+		const char *name = zynq_clk_get_name(i);
+		if (name)
+			printf("%10s%20lu\n", name, zynq_clk_get_rate(i));
+	}
+
+	return 0;
+}
diff --git a/arch/arm/cpu/armv7/zynq/cpu.c b/arch/arm/cpu/armv7/zynq/cpu.c
index 9af340e75e..7626b5c1a3 100644
--- a/arch/arm/cpu/armv7/zynq/cpu.c
+++ b/arch/arm/cpu/armv7/zynq/cpu.c
@@ -6,6 +6,7 @@
  */
 #include <common.h>
 #include <asm/io.h>
+#include <asm/arch/clk.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/hardware.h>
 
@@ -16,7 +17,7 @@ void lowlevel_init(void)
 int arch_cpu_init(void)
 {
 	zynq_slcr_unlock();
-
+#ifndef CONFIG_SPL_BUILD
 	/* Device config APB, unlock the PCAP */
 	writel(0x757BDF0D, &devcfg_base->unlock);
 	writel(0xFFFFFFFF, &devcfg_base->rom_shadow);
@@ -34,7 +35,8 @@ int arch_cpu_init(void)
 	/* Urgent write, ports S2/S3 */
 	writel(0xC, &slcr_base->ddr_urgent);
 #endif
-
+#endif
+	zynq_clk_early_init();
 	zynq_slcr_lock();
 
 	return 0;
@@ -46,3 +48,11 @@ void reset_cpu(ulong addr)
 	while (1)
 		;
 }
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+void enable_caches(void)
+{
+	/* Enable D-cache. I-cache is already enabled in start.S */
+	dcache_enable();
+}
+#endif
diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c
index b4c11c324c..d7c1882332 100644
--- a/arch/arm/cpu/armv7/zynq/slcr.c
+++ b/arch/arm/cpu/armv7/zynq/slcr.c
@@ -8,6 +8,7 @@
 #include <asm/io.h>
 #include <malloc.h>
 #include <asm/arch/hardware.h>
+#include <asm/arch/clk.h>
 
 #define SLCR_LOCK_MAGIC		0x767B
 #define SLCR_UNLOCK_MAGIC	0xDF0D
@@ -50,8 +51,10 @@ void zynq_slcr_cpu_reset(void)
 }
 
 /* Setup clk for network */
-void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk)
+void zynq_slcr_gem_clk_setup(u32 gem_id, unsigned long clk_rate)
 {
+	int ret;
+
 	zynq_slcr_unlock();
 
 	if (gem_id > 1) {
@@ -59,16 +62,16 @@ void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk)
 		goto out;
 	}
 
+	ret = zynq_clk_set_rate(gem0_clk + gem_id, clk_rate);
+	if (ret)
+		goto out;
+
 	if (gem_id) {
-		/* Set divisors for appropriate frequency in GEM_CLK_CTRL */
-		writel(clk, &slcr_base->gem1_clk_ctrl);
 		/* Configure GEM_RCLK_CTRL */
-		writel(rclk, &slcr_base->gem1_rclk_ctrl);
+		writel(1, &slcr_base->gem1_rclk_ctrl);
 	} else {
-		/* Set divisors for appropriate frequency in GEM_CLK_CTRL */
-		writel(clk, &slcr_base->gem0_clk_ctrl);
 		/* Configure GEM_RCLK_CTRL */
-		writel(rclk, &slcr_base->gem0_rclk_ctrl);
+		writel(1, &slcr_base->gem0_rclk_ctrl);
 	}
 	udelay(100000);
 out:
diff --git a/arch/arm/cpu/armv7/zynq/spl.c b/arch/arm/cpu/armv7/zynq/spl.c
new file mode 100644
index 0000000000..fcad762c03
--- /dev/null
+++ b/arch/arm/cpu/armv7/zynq/spl.c
@@ -0,0 +1,69 @@
+/*
+ * (C) Copyright 2014 Xilinx, Inc. Michal Simek
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <common.h>
+#include <spl.h>
+
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spl.h>
+#include <asm/arch/sys_proto.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void board_init_f(ulong dummy)
+{
+	ps7_init();
+
+	/* Clear the BSS. */
+	memset(__bss_start, 0, __bss_end - __bss_start);
+
+	/* Set global data pointer. */
+	gd = &gdata;
+
+	preloader_console_init();
+	arch_cpu_init();
+	board_init_r(NULL, 0);
+}
+
+u32 spl_boot_device(void)
+{
+	u32 mode;
+
+	switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) {
+#ifdef CONFIG_SPL_SPI_SUPPORT
+	case ZYNQ_BM_QSPI:
+		puts("qspi boot\n");
+		mode = BOOT_DEVICE_SPI;
+		break;
+#endif
+#ifdef CONFIG_SPL_MMC_SUPPORT
+	case ZYNQ_BM_SD:
+		puts("mmc boot\n");
+		mode = BOOT_DEVICE_MMC1;
+		break;
+#endif
+	default:
+		puts("Unsupported boot mode selected\n");
+		hang();
+	}
+
+	return mode;
+}
+
+#ifdef CONFIG_SPL_MMC_SUPPORT
+u32 spl_boot_mode(void)
+{
+	return MMCSD_MODE_FAT;
+}
+#endif
+
+#ifdef CONFIG_SPL_OS_BOOT
+int spl_start_uboot(void)
+{
+	/* boot linux */
+	return 0;
+}
+#endif
diff --git a/arch/arm/cpu/armv7/zynq/timer.c b/arch/arm/cpu/armv7/zynq/timer.c
index 2be253c2c3..303dbcfcea 100644
--- a/arch/arm/cpu/armv7/zynq/timer.c
+++ b/arch/arm/cpu/armv7/zynq/timer.c
@@ -29,6 +29,7 @@
 #include <div64.h>
 #include <asm/io.h>
 #include <asm/arch/hardware.h>
+#include <asm/arch/clk.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -48,7 +49,6 @@ static struct scu_timer *timer_base =
 
 #define TIMER_LOAD_VAL 0xFFFFFFFF
 #define TIMER_PRESCALE 255
-#define TIMER_TICK_HZ  (CONFIG_CPU_FREQ_HZ / 2 / TIMER_PRESCALE)
 
 int timer_init(void)
 {
@@ -56,6 +56,8 @@ int timer_init(void)
 			(TIMER_PRESCALE << SCUTIMER_CONTROL_PRESCALER_SHIFT) |
 			SCUTIMER_CONTROL_ENABLE_MASK;
 
+	gd->arch.timer_rate_hz = (gd->cpu_clk / 2) / (TIMER_PRESCALE + 1);
+
 	/* Load the timer counter register */
 	writel(0xFFFFFFFF, &timer_base->load);
 
@@ -69,7 +71,7 @@ int timer_init(void)
 
 	/* Reset time */
 	gd->arch.lastinc = readl(&timer_base->counter) /
-					(TIMER_TICK_HZ / CONFIG_SYS_HZ);
+				(gd->arch.timer_rate_hz / CONFIG_SYS_HZ);
 	gd->arch.tbl = 0;
 
 	return 0;
@@ -83,14 +85,15 @@ ulong get_timer_masked(void)
 {
 	ulong now;
 
-	now = readl(&timer_base->counter) / (TIMER_TICK_HZ / CONFIG_SYS_HZ);
+	now = readl(&timer_base->counter) /
+			(gd->arch.timer_rate_hz / CONFIG_SYS_HZ);
 
 	if (gd->arch.lastinc >= now) {
 		/* Normal mode */
 		gd->arch.tbl += gd->arch.lastinc - now;
 	} else {
 		/* We have an overflow ... */
-		gd->arch.tbl += gd->arch.lastinc + TIMER_LOAD_VAL - now;
+		gd->arch.tbl += gd->arch.lastinc + TIMER_LOAD_VAL - now + 1;
 	}
 	gd->arch.lastinc = now;
 
@@ -107,7 +110,8 @@ void __udelay(unsigned long usec)
 	if (usec == 0)
 		return;
 
-	countticks = lldiv(TIMER_TICK_HZ * usec, 1000000);
+	countticks = lldiv(((unsigned long long)gd->arch.timer_rate_hz * usec),
+			   1000000);
 
 	/* decrementing timer */
 	timeend = readl(&timer_base->counter) - countticks;
diff --git a/arch/arm/cpu/armv7/zynq/u-boot-spl.lds b/arch/arm/cpu/armv7/zynq/u-boot-spl.lds
new file mode 100644
index 0000000000..0c4501e5c7
--- /dev/null
+++ b/arch/arm/cpu/armv7/zynq/u-boot-spl.lds
@@ -0,0 +1,61 @@
+/*
+ * Copyright (c) 2014 Xilinx, Inc. Michal Simek
+ * Copyright (c) 2004-2008 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\
+		LENGTH = CONFIG_SPL_MAX_SIZE }
+MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
+		LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = ALIGN(4);
+	.text :
+	{
+		__image_copy_start = .;
+		CPUDIR/start.o (.text*)
+		*(.text*)
+	} > .sram
+
+	. = ALIGN(4);
+	.rodata : {
+		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+	} > .sram
+
+	. = ALIGN(4);
+	.data : {
+		*(.data*)
+	} > .sram
+
+	. = ALIGN(4);
+
+	. = .;
+
+	__image_copy_end = .;
+
+	_end = .;
+
+	/* Move BSS section to RAM because of FAT */
+	.bss (NOLOAD) : {
+		__bss_start = .;
+		*(.bss*)
+		 . = ALIGN(4);
+		__bss_end = .;
+	} > .sdram
+
+	/DISCARD/ : { *(.dynsym) }
+	/DISCARD/ : { *(.dynstr*) }
+	/DISCARD/ : { *(.dynamic*) }
+	/DISCARD/ : { *(.plt*) }
+	/DISCARD/ : { *(.interp*) }
+	/DISCARD/ : { *(.gnu*) }
+}
diff --git a/arch/arm/include/asm/arch-zynq/clk.h b/arch/arm/include/asm/arch-zynq/clk.h
new file mode 100644
index 0000000000..250c5bc07b
--- /dev/null
+++ b/arch/arm/include/asm/arch-zynq/clk.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2013 Xilinx Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _ZYNQ_CLK_H_
+#define _ZYNQ_CLK_H_
+
+enum zynq_clk {
+	armpll_clk, ddrpll_clk, iopll_clk,
+	cpu_6or4x_clk, cpu_3or2x_clk, cpu_2x_clk, cpu_1x_clk,
+	ddr2x_clk, ddr3x_clk, dci_clk,
+	lqspi_clk, smc_clk, pcap_clk, gem0_clk, gem1_clk,
+	fclk0_clk, fclk1_clk, fclk2_clk, fclk3_clk, can0_clk, can1_clk,
+	sdio0_clk, sdio1_clk, uart0_clk, uart1_clk, spi0_clk, spi1_clk, dma_clk,
+	usb0_aper_clk, usb1_aper_clk, gem0_aper_clk, gem1_aper_clk,
+	sdio0_aper_clk, sdio1_aper_clk, spi0_aper_clk, spi1_aper_clk,
+	can0_aper_clk, can1_aper_clk, i2c0_aper_clk, i2c1_aper_clk,
+	uart0_aper_clk, uart1_aper_clk, gpio_aper_clk, lqspi_aper_clk,
+	smc_aper_clk, swdt_clk, dbg_trc_clk, dbg_apb_clk, clk_max};
+
+void zynq_clk_early_init(void);
+int zynq_clk_set_rate(enum zynq_clk clk, unsigned long rate);
+unsigned long zynq_clk_get_rate(enum zynq_clk clk);
+const char *zynq_clk_get_name(enum zynq_clk clk);
+unsigned long get_uart_clk(int dev_id);
+
+#endif
diff --git a/arch/arm/include/asm/arch-zynq/hardware.h b/arch/arm/include/asm/arch-zynq/hardware.h
index cd69677729..39184da40e 100644
--- a/arch/arm/include/asm/arch-zynq/hardware.h
+++ b/arch/arm/include/asm/arch-zynq/hardware.h
@@ -7,6 +7,8 @@
 #ifndef _ASM_ARCH_HARDWARE_H
 #define _ASM_ARCH_HARDWARE_H
 
+#define ZYNQ_SERIAL_BASEADDR0		0xE0000000
+#define ZYNQ_SERIAL_BASEADDR1		0xE0001000
 #define ZYNQ_SYS_CTRL_BASEADDR		0xF8000000
 #define ZYNQ_DEV_CFG_APB_BASEADDR	0xF8007000
 #define ZYNQ_SCU_BASEADDR		0xF8F00000
@@ -21,17 +23,51 @@
 #define ZYNQ_SPI_BASEADDR1		0xE0007000
 #define ZYNQ_DDRC_BASEADDR		0xF8006000
 
+/* Bootmode setting values */
+#define ZYNQ_BM_MASK		0xF
+#define ZYNQ_BM_NOR		0x2
+#define ZYNQ_BM_SD		0x5
+#define ZYNQ_BM_JTAG		0x0
+
 /* Reflect slcr offsets */
 struct slcr_regs {
 	u32 scl; /* 0x0 */
 	u32 slcr_lock; /* 0x4 */
 	u32 slcr_unlock; /* 0x8 */
-	u32 reserved0[75];
+	u32 reserved0_1[61];
+	u32 arm_pll_ctrl; /* 0x100 */
+	u32 ddr_pll_ctrl; /* 0x104 */
+	u32 io_pll_ctrl; /* 0x108 */
+	u32 reserved0_2[5];
+	u32 arm_clk_ctrl; /* 0x120 */
+	u32 ddr_clk_ctrl; /* 0x124 */
+	u32 dci_clk_ctrl; /* 0x128 */
+	u32 aper_clk_ctrl; /* 0x12c */
+	u32 reserved0_3[2];
 	u32 gem0_rclk_ctrl; /* 0x138 */
 	u32 gem1_rclk_ctrl; /* 0x13c */
 	u32 gem0_clk_ctrl; /* 0x140 */
 	u32 gem1_clk_ctrl; /* 0x144 */
-	u32 reserved1[46];
+	u32 smc_clk_ctrl; /* 0x148 */
+	u32 lqspi_clk_ctrl; /* 0x14c */
+	u32 sdio_clk_ctrl; /* 0x150 */
+	u32 uart_clk_ctrl; /* 0x154 */
+	u32 spi_clk_ctrl; /* 0x158 */
+	u32 can_clk_ctrl; /* 0x15c */
+	u32 can_mioclk_ctrl; /* 0x160 */
+	u32 dbg_clk_ctrl; /* 0x164 */
+	u32 pcap_clk_ctrl; /* 0x168 */
+	u32 reserved0_4[1];
+	u32 fpga0_clk_ctrl; /* 0x170 */
+	u32 reserved0_5[3];
+	u32 fpga1_clk_ctrl; /* 0x180 */
+	u32 reserved0_6[3];
+	u32 fpga2_clk_ctrl; /* 0x190 */
+	u32 reserved0_7[3];
+	u32 fpga3_clk_ctrl; /* 0x1a0 */
+	u32 reserved0_8[8];
+	u32 clk_621_true; /* 0x1c4 */
+	u32 reserved1[14];
 	u32 pss_rst_ctrl; /* 0x200 */
 	u32 reserved2[15];
 	u32 fpga_rst_ctrl; /* 0x240 */
diff --git a/arch/arm/include/asm/arch-zynq/spl.h b/arch/arm/include/asm/arch-zynq/spl.h
new file mode 100644
index 0000000000..5789d28bb3
--- /dev/null
+++ b/arch/arm/include/asm/arch-zynq/spl.h
@@ -0,0 +1,18 @@
+/*
+ * (C) Copyright 2014 Xilinx, Inc. Michal Simek
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#ifndef	_ASM_ARCH_SPL_H_
+#define	_ASM_ARCH_SPL_H_
+
+extern void ps7_init(void);
+
+#define BOOT_DEVICE_NONE	0
+#define BOOT_DEVICE_RAM		1
+#define BOOT_DEVICE_SPI		2
+#define BOOT_DEVICE_MMC1	3
+#define BOOT_DEVICE_MMC2	4
+#define BOOT_DEVICE_MMC2_2	5
+
+#endif
diff --git a/arch/arm/include/asm/arch-zynq/sys_proto.h b/arch/arm/include/asm/arch-zynq/sys_proto.h
index 8f925af8a4..0a2ba058f2 100644
--- a/arch/arm/include/asm/arch-zynq/sys_proto.h
+++ b/arch/arm/include/asm/arch-zynq/sys_proto.h
@@ -10,7 +10,7 @@
 extern void zynq_slcr_lock(void);
 extern void zynq_slcr_unlock(void);
 extern void zynq_slcr_cpu_reset(void);
-extern void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk);
+extern void zynq_slcr_gem_clk_setup(u32 gem_id, unsigned long clk_rate);
 extern void zynq_slcr_devcfg_disable(void);
 extern void zynq_slcr_devcfg_enable(void);
 extern u32 zynq_slcr_get_boot_mode(void);
diff --git a/board/xilinx/zynq/Makefile b/board/xilinx/zynq/Makefile
index 6301a8c149..3f19a1cd8b 100644
--- a/board/xilinx/zynq/Makefile
+++ b/board/xilinx/zynq/Makefile
@@ -6,3 +6,4 @@
 #
 
 obj-y	:= board.o
+obj-$(CONFIG_SPL_BUILD)	+= ps7_init.o
diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c
index 5a47149902..82f2345c95 100644
--- a/board/xilinx/zynq/board.c
+++ b/board/xilinx/zynq/board.c
@@ -12,12 +12,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-/* Bootmode setting values */
-#define ZYNQ_BM_MASK		0x0F
-#define ZYNQ_BM_NOR		0x02
-#define ZYNQ_BM_SD		0x05
-#define ZYNQ_BM_JTAG		0x0
-
 #ifdef CONFIG_FPGA
 Xilinx_desc fpga;
 
@@ -59,8 +53,6 @@ int board_init(void)
 	}
 #endif
 
-	icache_enable();
-
 #ifdef CONFIG_FPGA
 	fpga_init();
 	fpga_add(fpga_xilinx, &fpga);
@@ -89,7 +81,6 @@ int board_late_init(void)
 	return 0;
 }
 
-#ifdef CONFIG_CMD_NET
 int board_eth_init(bd_t *bis)
 {
 	u32 ret = 0;
@@ -123,7 +114,6 @@ int board_eth_init(bd_t *bis)
 #endif
 	return ret;
 }
-#endif
 
 #ifdef CONFIG_CMD_MMC
 int board_mmc_init(bd_t *bd)
diff --git a/board/xilinx/zynq/ps7_init.c b/board/xilinx/zynq/ps7_init.c
new file mode 100644
index 0000000000..c47da09b9e
--- /dev/null
+++ b/board/xilinx/zynq/ps7_init.c
@@ -0,0 +1,12 @@
+/*
+ * (C) Copyright 2014 Xilinx, Inc. Michal Simek
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+#include <common.h>
+#include <asm/arch/spl.h>
+
+__weak void ps7_init(void)
+{
+	puts("Please copy ps7_init.c/h from hw project\n");
+}
diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c
index 381bca459e..6d4001b017 100644
--- a/drivers/net/zynq_gem.c
+++ b/drivers/net/zynq_gem.c
@@ -90,6 +90,11 @@
 #define ZYNQ_GEM_TXBUF_EXHAUSTED	0x08000000
 #define ZYNQ_GEM_TXBUF_UNDERRUN		0x10000000
 
+/* Clock frequencies for different speeds */
+#define ZYNQ_GEM_FREQUENCY_10	2500000UL
+#define ZYNQ_GEM_FREQUENCY_100	25000000UL
+#define ZYNQ_GEM_FREQUENCY_1000	125000000UL
+
 /* Device registers */
 struct zynq_gem_regs {
 	u32 nwctrl; /* Network Control reg */
@@ -270,7 +275,8 @@ static int zynq_gem_setup_mac(struct eth_device *dev)
 
 static int zynq_gem_init(struct eth_device *dev, bd_t * bis)
 {
-	u32 i, rclk, clk = 0;
+	u32 i;
+	unsigned long clk_rate = 0;
 	struct phy_device *phydev;
 	const u32 stat_size = (sizeof(struct zynq_gem_regs) -
 				offsetof(struct zynq_gem_regs, stat)) / 4;
@@ -348,26 +354,22 @@ static int zynq_gem_init(struct eth_device *dev, bd_t * bis)
 	case SPEED_1000:
 		writel(ZYNQ_GEM_NWCFG_INIT | ZYNQ_GEM_NWCFG_SPEED1000,
 		       &regs->nwcfg);
-		rclk = (0 << 4) | (1 << 0);
-		clk = (1 << 20) | (8 << 8) | (0 << 4) | (1 << 0);
+		clk_rate = ZYNQ_GEM_FREQUENCY_1000;
 		break;
 	case SPEED_100:
 		clrsetbits_le32(&regs->nwcfg, ZYNQ_GEM_NWCFG_SPEED1000,
 				ZYNQ_GEM_NWCFG_INIT | ZYNQ_GEM_NWCFG_SPEED100);
-		rclk = 1 << 0;
-		clk = (5 << 20) | (8 << 8) | (0 << 4) | (1 << 0);
+		clk_rate = ZYNQ_GEM_FREQUENCY_100;
 		break;
 	case SPEED_10:
-		rclk = 1 << 0;
-		/* FIXME untested */
-		clk = (5 << 20) | (8 << 8) | (0 << 4) | (1 << 0);
+		clk_rate = ZYNQ_GEM_FREQUENCY_10;
 		break;
 	}
 
 	/* Change the rclk and clk only not using EMIO interface */
 	if (!priv->emio)
 		zynq_slcr_gem_clk_setup(dev->iobase !=
-					ZYNQ_GEM_BASEADDR0, rclk, clk);
+					ZYNQ_GEM_BASEADDR0, clk_rate);
 
 	setbits_le32(&regs->nwctrl, ZYNQ_GEM_NWCTRL_RXEN_MASK |
 					ZYNQ_GEM_NWCTRL_TXEN_MASK);
diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c
index ff28f3c801..22c6bf099c 100644
--- a/drivers/serial/serial_zynq.c
+++ b/drivers/serial/serial_zynq.c
@@ -10,6 +10,8 @@
 #include <asm/io.h>
 #include <linux/compiler.h>
 #include <serial.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/hardware.h>
 
 #define ZYNQ_UART_SR_TXFULL	0x00000010 /* TX FIFO full */
 #define ZYNQ_UART_SR_RXEMPTY	0x00000002 /* RX FIFO empty */
@@ -33,28 +35,24 @@ struct uart_zynq {
 };
 
 static struct uart_zynq *uart_zynq_ports[2] = {
-#ifdef CONFIG_ZYNQ_SERIAL_BASEADDR0
-	[0] = (struct uart_zynq *)CONFIG_ZYNQ_SERIAL_BASEADDR0,
+	[0] = (struct uart_zynq *)ZYNQ_SERIAL_BASEADDR0,
+	[1] = (struct uart_zynq *)ZYNQ_SERIAL_BASEADDR1,
+};
+
+#if !defined(CONFIG_ZYNQ_SERIAL_BAUDRATE0)
+# define CONFIG_ZYNQ_SERIAL_BAUDRATE0	CONFIG_BAUDRATE
 #endif
-#ifdef CONFIG_ZYNQ_SERIAL_BASEADDR1
-	[1] = (struct uart_zynq *)CONFIG_ZYNQ_SERIAL_BASEADDR1,
+#if !defined(CONFIG_ZYNQ_SERIAL_BAUDRATE1)
+# define CONFIG_ZYNQ_SERIAL_BAUDRATE1	CONFIG_BAUDRATE
 #endif
-};
 
 struct uart_zynq_params {
 	u32 baudrate;
-	u32 clock;
 };
 
 static struct uart_zynq_params uart_zynq_ports_param[2] = {
-#if defined(CONFIG_ZYNQ_SERIAL_BAUDRATE0) && defined(CONFIG_ZYNQ_SERIAL_CLOCK0)
 	[0].baudrate = CONFIG_ZYNQ_SERIAL_BAUDRATE0,
-	[0].clock = CONFIG_ZYNQ_SERIAL_CLOCK0,
-#endif
-#if defined(CONFIG_ZYNQ_SERIAL_BAUDRATE1) && defined(CONFIG_ZYNQ_SERIAL_CLOCK1)
 	[1].baudrate = CONFIG_ZYNQ_SERIAL_BAUDRATE1,
-	[1].clock = CONFIG_ZYNQ_SERIAL_CLOCK1,
-#endif
 };
 
 /* Set up the baud rate in gd struct */
@@ -64,7 +62,7 @@ static void uart_zynq_serial_setbrg(const int port)
 	unsigned int calc_bauderror, bdiv, bgen;
 	unsigned long calc_baud = 0;
 	unsigned long baud = uart_zynq_ports_param[port].baudrate;
-	unsigned long clock = uart_zynq_ports_param[port].clock;
+	unsigned long clock = get_uart_clk(port);
 	struct uart_zynq *regs = uart_zynq_ports[port];
 
 	/*                master clock
@@ -186,20 +184,19 @@ struct serial_device uart_zynq_serial1_device =
 
 __weak struct serial_device *default_serial_console(void)
 {
+#if defined(CONFIG_ZYNQ_SERIAL_UART0)
 	if (uart_zynq_ports[0])
 		return &uart_zynq_serial0_device;
+#endif
+#if defined(CONFIG_ZYNQ_SERIAL_UART1)
 	if (uart_zynq_ports[1])
 		return &uart_zynq_serial1_device;
-
+#endif
 	return NULL;
 }
 
 void zynq_serial_initalize(void)
 {
-#ifdef CONFIG_ZYNQ_SERIAL_BASEADDR0
 	serial_register(&uart_zynq_serial0_device);
-#endif
-#ifdef CONFIG_ZYNQ_SERIAL_BASEADDR1
 	serial_register(&uart_zynq_serial1_device);
-#endif
 }
diff --git a/include/common.h b/include/common.h
index 221b7768c5..ea3e5ed69f 100644
--- a/include/common.h
+++ b/include/common.h
@@ -964,6 +964,22 @@ static inline phys_addr_t map_to_sysmem(const void *ptr)
 #define DIV_ROUND_UP(n,d)	(((n) + (d) - 1) / (d))
 #define roundup(x, y)		((((x) + ((y) - 1)) / (y)) * (y))
 
+/*
+ * Divide positive or negative dividend by positive divisor and round
+ * to closest integer. Result is undefined for negative divisors and
+ * for negative dividends if the divisor variable type is unsigned.
+ */
+#define DIV_ROUND_CLOSEST(x, divisor)(			\
+{							\
+	typeof(x) __x = x;				\
+	typeof(divisor) __d = divisor;			\
+	(((typeof(x))-1) > 0 ||				\
+	 ((typeof(divisor))-1) > 0 || (__x) > 0) ?	\
+		(((__x) + ((__d) / 2)) / (__d)) :	\
+		(((__x) - ((__d) / 2)) / (__d));	\
+}							\
+)
+
 #define ALIGN(x,a)		__ALIGN_MASK((x),(typeof(x))(a)-1)
 #define __ALIGN_MASK(x,mask)	(((x)+(mask))&~(mask))
 
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 9b6db043b5..c7eee0abe5 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -35,27 +35,12 @@
 #define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
-/* Zynq Serial driver */
-#ifdef CONFIG_ZYNQ_SERIAL_UART0
-# define CONFIG_ZYNQ_SERIAL_BASEADDR0	0xE0000000
-# define CONFIG_ZYNQ_SERIAL_BAUDRATE0	CONFIG_BAUDRATE
-# define CONFIG_ZYNQ_SERIAL_CLOCK0	50000000
-#endif
-
-#ifdef CONFIG_ZYNQ_SERIAL_UART1
-# define CONFIG_ZYNQ_SERIAL_BASEADDR1	0xE0001000
-# define CONFIG_ZYNQ_SERIAL_BAUDRATE1	CONFIG_BAUDRATE
-# define CONFIG_ZYNQ_SERIAL_CLOCK1	50000000
-#endif
-
-#if defined(CONFIG_ZYNQ_SERIAL_UART0) || defined(CONFIG_ZYNQ_SERIAL_UART1)
-# define CONFIG_ZYNQ_SERIAL
-#endif
-
 /* DCC driver */
 #if defined(CONFIG_ZYNQ_DCC)
 # define CONFIG_ARM_DCC
 # define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */
+#else
+# define CONFIG_ZYNQ_SERIAL
 #endif
 
 /* Ethernet driver */
@@ -178,6 +163,8 @@
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_BOARD_LATE_INIT
 #define CONFIG_SYS_LONGHELP
+#define CONFIG_CLOCKS
+#define CONFIG_CMD_CLK
 #define CONFIG_SYS_MAXARGS		15 /* max number of command args */
 #define CONFIG_SYS_CBSIZE		256 /* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
@@ -221,6 +208,9 @@
 #define CONFIG_FIT_SIGNATURE
 #define CONFIG_RSA
 
+/* Extend size of kernel image for uncompression */
+#define CONFIG_SYS_BOOTM_LEN	(20 * 1024 * 1024)
+
 /* Boot FreeBSD/vxWorks from an ELF image */
 #if defined(CONFIG_ZYNQ_BOOT_FREEBSD)
 # define CONFIG_API
@@ -236,5 +226,83 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
+#define CONFIG_CMD_TFTPPUT
+
+/* SPL part */
+#define CONFIG_SPL
+#define CONFIG_CMD_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+
+#define CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/armv7/zynq/u-boot-spl.lds"
+
+/* Disable dcache for SPL just for sure */
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_DCACHE_OFF
+#undef CONFIG_FPGA
+#endif
+
+/* MMC support */
+#ifdef CONFIG_ZYNQ_SDHCI0
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x200 /* 256 KB */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION    1
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME     "u-boot.img"
+#endif
+
+/* Address in RAM where the parameters must be copied by SPL. */
+#define CONFIG_SYS_SPL_ARGS_ADDR	0x10000000
+
+#define CONFIG_SPL_FAT_LOAD_ARGS_NAME		"system.dtb"
+#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME		"uImage"
+
+/* Not using MMC raw mode - just for compilation purpose */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	0
+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0
+
+/* qspi mode is working fine */
+#ifdef CONFIG_ZYNQ_QSPI
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_BUS	0
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x100000
+#define CONFIG_SPL_SPI_CS	0
+#endif
+
+/* for booting directly linux */
+#define CONFIG_SPL_OS_BOOT
+
+/* SP location before relocation, must use scratch RAM */
+#define CONFIG_SPL_TEXT_BASE	0x0
+
+/* 3 * 64kB blocks of OCM - one is on the top because of bootrom */
+#define CONFIG_SPL_MAX_SIZE	0x30000
+
+/* The highest 64k OCM address */
+#define OCM_HIGH_ADDR	0xffff0000
+
+/* Just define any reasonable size */
+#define CONFIG_SPL_STACK_SIZE	0x1000
+
+/* SPL stack position - and stack goes down */
+#define CONFIG_SPL_STACK	(OCM_HIGH_ADDR + CONFIG_SPL_STACK_SIZE)
+
+/* On the top of OCM space */
+#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SPL_STACK + \
+					 GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x1000
+
+/* BSS setup */
+#define CONFIG_SPL_BSS_START_ADDR	0x100000
+#define CONFIG_SPL_BSS_MAX_SIZE		0x100000
+
+#define CONFIG_SYS_UBOOT_START	CONFIG_SYS_TEXT_BASE
 
 #endif /* __CONFIG_ZYNQ_COMMON_H */
diff --git a/include/configs/zynq_zc70x.h b/include/configs/zynq_zc70x.h
index 673660e659..de0e24129c 100644
--- a/include/configs/zynq_zc70x.h
+++ b/include/configs/zynq_zc70x.h
@@ -2,7 +2,7 @@
  * (C) Copyright 2013 Xilinx, Inc.
  *
  * Configuration settings for the Xilinx Zynq ZC702 and ZC706 boards
- * See zynq_common.h for Zynq common configs
+ * See zynq-common.h for Zynq common configs
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
diff --git a/include/configs/zynq_zed.h b/include/configs/zynq_zed.h
index 412dede533..274140cb3f 100644
--- a/include/configs/zynq_zed.h
+++ b/include/configs/zynq_zed.h
@@ -2,7 +2,7 @@
  * (C) Copyright 2013 Xilinx, Inc.
  *
  * Configuration for Zynq Evaluation and Development Board - ZedBoard
- * See zynq_common.h for Zynq common configs
+ * See zynq-common.h for Zynq common configs
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */