diff options
| -rw-r--r-- | arch/x86/include/asm/i8254.h | 43 | ||||
| -rw-r--r-- | arch/x86/include/asm/i8259.h | 31 | ||||
| -rw-r--r-- | arch/x86/lib/pcat_interrupts.c | 21 | ||||
| -rw-r--r-- | arch/x86/lib/pcat_timer.c | 10 |
4 files changed, 52 insertions, 53 deletions
diff --git a/arch/x86/include/asm/i8254.h b/arch/x86/include/asm/i8254.h index 4116de1f07..48e4df25b8 100644 --- a/arch/x86/include/asm/i8254.h +++ b/arch/x86/include/asm/i8254.h @@ -5,38 +5,35 @@ * SPDX-License-Identifier: GPL-2.0+ */ - /* i8254.h Intel 8254 PIT registers */ - #ifndef _ASMI386_I8254_H_ -#define _ASMI386_I8954_H_ 1 - +#define _ASMI386_I8954_H_ -#define PIT_T0 0x00 /* PIT channel 0 count/status */ -#define PIT_T1 0x01 /* PIT channel 1 count/status */ -#define PIT_T2 0x02 /* PIT channel 2 count/status */ -#define PIT_COMMAND 0x03 /* PIT mode control, latch and read back */ +#define PIT_T0 0x00 /* PIT channel 0 count/status */ +#define PIT_T1 0x01 /* PIT channel 1 count/status */ +#define PIT_T2 0x02 /* PIT channel 2 count/status */ +#define PIT_COMMAND 0x03 /* PIT mode control, latch and read back */ /* PIT Command Register Bit Definitions */ -#define PIT_CMD_CTR0 0x00 /* Select PIT counter 0 */ -#define PIT_CMD_CTR1 0x40 /* Select PIT counter 1 */ -#define PIT_CMD_CTR2 0x80 /* Select PIT counter 2 */ +#define PIT_CMD_CTR0 0x00 /* Select PIT counter 0 */ +#define PIT_CMD_CTR1 0x40 /* Select PIT counter 1 */ +#define PIT_CMD_CTR2 0x80 /* Select PIT counter 2 */ -#define PIT_CMD_LATCH 0x00 /* Counter Latch Command */ -#define PIT_CMD_LOW 0x10 /* Access counter bits 7-0 */ -#define PIT_CMD_HIGH 0x20 /* Access counter bits 15-8 */ -#define PIT_CMD_BOTH 0x30 /* Access counter bits 15-0 in two accesses */ +#define PIT_CMD_LATCH 0x00 /* Counter Latch Command */ +#define PIT_CMD_LOW 0x10 /* Access counter bits 7-0 */ +#define PIT_CMD_HIGH 0x20 /* Access counter bits 15-8 */ +#define PIT_CMD_BOTH 0x30 /* Access counter bits 15-0 in two accesses */ -#define PIT_CMD_MODE0 0x00 /* Select mode 0 */ -#define PIT_CMD_MODE1 0x02 /* Select mode 1 */ -#define PIT_CMD_MODE2 0x04 /* Select mode 2 */ -#define PIT_CMD_MODE3 0x06 /* Select mode 3 */ -#define PIT_CMD_MODE4 0x08 /* Select mode 4 */ -#define PIT_CMD_MODE5 0x0A /* Select mode 5 */ +#define PIT_CMD_MODE0 0x00 /* Select mode 0 */ +#define PIT_CMD_MODE1 0x02 /* Select mode 1 */ +#define PIT_CMD_MODE2 0x04 /* Select mode 2 */ +#define PIT_CMD_MODE3 0x06 /* Select mode 3 */ +#define PIT_CMD_MODE4 0x08 /* Select mode 4 */ +#define PIT_CMD_MODE5 0x0a /* Select mode 5 */ /* The clock frequency of the i8253/i8254 PIT */ -#define PIT_TICK_RATE 1193182ul +#define PIT_TICK_RATE 1193182 -#endif +#endif /* _ASMI386_I8954_H_ */ diff --git a/arch/x86/include/asm/i8259.h b/arch/x86/include/asm/i8259.h index bc4033bed2..f216c23204 100644 --- a/arch/x86/include/asm/i8259.h +++ b/arch/x86/include/asm/i8259.h @@ -8,11 +8,9 @@ /* i8259.h i8259 PIC Registers */ #ifndef _ASMI386_I8259_H_ -#define _ASMI386_I8959_H_ 1 - +#define _ASMI386_I8959_H_ /* PIC I/O mapped registers */ - #define IRR 0x0 /* Interrupt Request Register */ #define ISR 0x0 /* In-Service Register */ #define ICW1 0x0 /* Initialization Control Word 1 */ @@ -23,7 +21,7 @@ #define ICW4 0x1 /* Initialization Control Word 4 */ #define IMR 0x1 /* Interrupt Mask Register */ -/* bits for IRR, IMR, ISR and ICW3 */ +/* IRR, IMR, ISR and ICW3 bits */ #define IR7 0x80 /* IR7 */ #define IR6 0x40 /* IR6 */ #define IR5 0x20 /* IR5 */ @@ -33,7 +31,7 @@ #define IR1 0x02 /* IR1 */ #define IR0 0x01 /* IR0 */ -/* bits for SEOI */ +/* SEOI bits */ #define SEOI_IR7 0x07 /* IR7 */ #define SEOI_IR6 0x06 /* IR6 */ #define SEOI_IR5 0x05 /* IR5 */ @@ -49,9 +47,9 @@ #define OCW2_NOP 0x40 /* NOP */ #define OCW2_SEOI 0x60 /* Specific EOI */ #define OCW2_RSET 0x80 /* Rotate/set */ -#define OCW2_REOI 0xA0 /* Rotate on non specific EOI */ -#define OCW2_PSET 0xC0 /* Priority Set Command */ -#define OCW2_RSEOI 0xE0 /* Rotate on specific EOI */ +#define OCW2_REOI 0xa0 /* Rotate on non specific EOI */ +#define OCW2_PSET 0xc0 /* Priority Set Command */ +#define OCW2_RSEOI 0xe0 /* Rotate on specific EOI */ /* ICW1 bits */ #define ICW1_SEL 0x10 /* Select ICW1 */ @@ -60,15 +58,20 @@ #define ICW1_SNGL 0x02 /* Single PIC */ #define ICW1_EICW4 0x01 /* Expect initilization ICW4 */ -/* ICW2 is the starting vector number */ - -/* ICW2 is bit-mask of present slaves for a master device, - * or the slave ID for a slave device */ +/* + * ICW2 is the starting vector number + * + * ICW2 is bit-mask of present slaves for a master device, + * or the slave ID for a slave device + */ /* ICW4 bits */ -#define ICW4_AEOI 0x02 /* Automatic EOI Mode */ +#define ICW4_AEOI 0x02 /* Automatic EOI Mode */ #define ICW4_PM 0x01 /* Microprocessor Mode */ +#define ELCR1 0x4d0 +#define ELCR2 0x4d1 + int i8259_init(void); -#endif +#endif /* _ASMI386_I8959_H_ */ diff --git a/arch/x86/lib/pcat_interrupts.c b/arch/x86/lib/pcat_interrupts.c index 9780f46270..b9d06140d4 100644 --- a/arch/x86/lib/pcat_interrupts.c +++ b/arch/x86/lib/pcat_interrupts.c @@ -28,10 +28,11 @@ int i8259_init(void) outb(0xff, MASTER_PIC + IMR); outb(0xff, SLAVE_PIC + IMR); - /* Master PIC */ - /* Place master PIC interrupts at INT20 */ - /* ICW3, One slave PIC is present */ - outb(ICW1_SEL|ICW1_EICW4, MASTER_PIC + ICW1); + /* + * Master PIC + * Place master PIC interrupts at INT20 + */ + outb(ICW1_SEL | ICW1_EICW4, MASTER_PIC + ICW1); outb(0x20, MASTER_PIC + ICW2); outb(IR2, MASTER_PIC + ICW3); outb(ICW4_PM, MASTER_PIC + ICW4); @@ -39,10 +40,11 @@ int i8259_init(void) for (i = 0; i < 8; i++) outb(OCW2_SEOI | i, MASTER_PIC + OCW2); - /* Slave PIC */ - /* Place slave PIC interrupts at INT28 */ - /* Slave ID */ - outb(ICW1_SEL|ICW1_EICW4, SLAVE_PIC + ICW1); + /* + * Slave PIC + * Place slave PIC interrupts at INT28 + */ + outb(ICW1_SEL | ICW1_EICW4, SLAVE_PIC + ICW1); outb(0x28, SLAVE_PIC + ICW2); outb(0x02, SLAVE_PIC + ICW3); outb(ICW4_PM, SLAVE_PIC + ICW4); @@ -110,9 +112,6 @@ void specific_eoi(int irq) outb(OCW2_SEOI | irq, MASTER_PIC + OCW2); } -#define ELCR1 0x4d0 -#define ELCR2 0x4d1 - void configure_irq_trigger(int int_num, bool is_level_triggered) { u16 int_bits = inb(ELCR1) | (((u16)inb(ELCR2)) << 8); diff --git a/arch/x86/lib/pcat_timer.c b/arch/x86/lib/pcat_timer.c index 3545a5048e..ce15818ec2 100644 --- a/arch/x86/lib/pcat_timer.c +++ b/arch/x86/lib/pcat_timer.c @@ -9,17 +9,17 @@ #include <asm/io.h> #include <asm/i8254.h> -#define TIMER2_VALUE 0x0a8e /* 440Hz */ +#define TIMER2_VALUE 0x0a8e /* 440Hz */ int pcat_timer_init(void) { /* - * initialize 2, used to drive the speaker - * (to start a beep: write 3 to port 0x61, - * to stop it again: write 0) + * Initialize counter 2, used to drive the speaker. + * To start a beep, set both bit0 and bit1 of port 0x61. + * To stop it, clear both bit0 and bit1 of port 0x61. */ outb(PIT_CMD_CTR2 | PIT_CMD_BOTH | PIT_CMD_MODE3, - PIT_BASE + PIT_COMMAND); + PIT_BASE + PIT_COMMAND); outb(TIMER2_VALUE & 0xff, PIT_BASE + PIT_T2); outb(TIMER2_VALUE >> 8, PIT_BASE + PIT_T2); |
