Merged POST framework with the current TOT.

Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>

1 files changed, 395 insertions, 0 deletions

diff --git a/post/cpu/ppc4xx/ether.c b/post/cpu/ppc4xx/ether.c
new file mode 100644
index 0000000000..391c815d7a
--- /dev/null
+++ b/post/cpu/ppc4xx/ether.c
@@ -0,0 +1,395 @@
+/*
+ * (C) Copyright 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Author: Igor Lisitsin <igor@emcraft.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * Ethernet test
+ *
+ * The Ethernet Media Access Controllers (EMAC) are tested in the
+ * internal loopback mode.
+ * The controllers are configured accordingly and several packets
+ * are transmitted. The configurable test parameters are:
+ *   MIN_PACKET_LENGTH - minimum size of packet to transmit
+ *   MAX_PACKET_LENGTH - maximum size of packet to transmit
+ *   TEST_NUM - number of tests
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+
+#if CONFIG_POST & CFG_POST_ETHER
+
+#include <asm/cache.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <405_mal.h>
+#include <ppc4xx_enet.h>
+#include <malloc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define SDR0_MFR_ETH_CLK_SEL_V(n)	((0x01<<27) / (n+1))
+#endif
+
+#define MIN_PACKET_LENGTH	64
+#define MAX_PACKET_LENGTH	256
+#define TEST_NUM		1
+
+static volatile mal_desc_t tx __cacheline_aligned;
+static volatile mal_desc_t rx __cacheline_aligned;
+static char *tx_buf;
+static char *rx_buf;
+
+static void ether_post_init (int devnum, int hw_addr)
+{
+	int i;
+	unsigned mode_reg;
+#if defined(CONFIG_440GX) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+	sys_info_t sysinfo;
+#endif
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || defined(CONFIG_440SPE)
+	unsigned long mfr;
+#endif
+
+#if defined(CONFIG_440GX) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+	/* Need to get the OPB frequency so we can access the PHY */
+	get_sys_info (&sysinfo);
+#endif
+
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+	/* provide clocks for EMAC internal loopback  */
+	mfsdr (sdr_mfr, mfr);
+	mfr |= SDR0_MFR_ETH_CLK_SEL_V(devnum);
+	mtsdr (sdr_mfr, mfr);
+	sync ();
+#endif
+	/* reset emac */
+	out32 (EMAC_M0 + hw_addr, EMAC_M0_SRST);
+	sync ();
+
+	for (i = 0;; i++) {
+		if (!(in32 (EMAC_M0 + hw_addr) & EMAC_M0_SRST))
+			break;
+		if (i >= 1000) {
+			printf ("Timeout resetting EMAC\n");
+			break;
+		}
+		udelay (1000);
+	}
+#if defined(CONFIG_440GX) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+	/* Whack the M1 register */
+	mode_reg = 0x0;
+	if (sysinfo.freqOPB <= 50000000);
+	else if (sysinfo.freqOPB <= 66666667)
+		mode_reg |= EMAC_M1_OBCI_66;
+	else if (sysinfo.freqOPB <= 83333333)
+		mode_reg |= EMAC_M1_OBCI_83;
+	else if (sysinfo.freqOPB <= 100000000)
+		mode_reg |= EMAC_M1_OBCI_100;
+	else
+		mode_reg |= EMAC_M1_OBCI_GT100;
+
+	out32 (EMAC_M1 + hw_addr, mode_reg);
+
+#endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */
+
+	/* set the Mal configuration reg */
+#if defined(CONFIG_440GX) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+	mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA |
+	       MAL_CR_PLBLT_DEFAULT | 0x00330000);
+#else
+	mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT);
+	/* Errata 1.12: MAL_1 -- Disable MAL bursting */
+	if (get_pvr() == PVR_440GP_RB) {
+		mtdcr (malmcr, mfdcr(malmcr) & ~MAL_CR_PLBB);
+	}
+#endif
+	/* setup buffer descriptors */
+	tx.ctrl = MAL_TX_CTRL_WRAP;
+	tx.data_len = 0;
+	tx.data_ptr = (char*)L1_CACHE_ALIGN((u32)tx_buf);
+
+	rx.ctrl = MAL_TX_CTRL_WRAP | MAL_RX_CTRL_EMPTY;
+	rx.data_len = 0;
+	rx.data_ptr = (char*)L1_CACHE_ALIGN((u32)rx_buf);
+
+	switch (devnum) {
+	case 1:
+		/* setup MAL tx & rx channel pointers */
+#if defined (CONFIG_405EP) || defined (CONFIG_440EP) || defined (CONFIG_440GR)
+		mtdcr (maltxctp2r, &tx);
+#else
+		mtdcr (maltxctp1r, &tx);
+#endif
+#if defined(CONFIG_440)
+		mtdcr (maltxbattr, 0x0);
+		mtdcr (malrxbattr, 0x0);
+#endif
+		mtdcr (malrxctp1r, &rx);
+		/* set RX buffer size */
+		mtdcr (malrcbs1, PKTSIZE_ALIGN / 16);
+		break;
+	case 0:
+	default:
+		/* setup MAL tx & rx channel pointers */
+#if defined(CONFIG_440)
+		mtdcr (maltxbattr, 0x0);
+		mtdcr (malrxbattr, 0x0);
+#endif
+		mtdcr (maltxctp0r, &tx);
+		mtdcr (malrxctp0r, &rx);
+		/* set RX buffer size */
+		mtdcr (malrcbs0, PKTSIZE_ALIGN / 16);
+		break;
+	}
+
+	/* Enable MAL transmit and receive channels */
+#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
+	mtdcr (maltxcasr, (MAL_TXRX_CASR >> (devnum*2)));
+#else
+	mtdcr (maltxcasr, (MAL_TXRX_CASR >> devnum));
+#endif
+	mtdcr (malrxcasr, (MAL_TXRX_CASR >> devnum));
+
+	/* set internal loopback mode */
+	out32 (EMAC_M1 + hw_addr, EMAC_M1_FDE | EMAC_M1_ILE |
+	       EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K |
+	       EMAC_M1_MF_100MBPS | EMAC_M1_IST |
+	       in32 (EMAC_M1));
+
+	/* set transmit enable & receive enable */
+	out32 (EMAC_M0 + hw_addr, EMAC_M0_TXE | EMAC_M0_RXE);
+
+	/* enable broadcast address */
+	out32 (EMAC_RXM + hw_addr, EMAC_RMR_BAE);
+
+	/* set transmit request threshold register */
+	out32 (EMAC_TRTR + hw_addr, 0x18000000);	/* 256 byte threshold */
+
+	/* set receive	low/high water mark register */
+#if defined(CONFIG_440)
+	/* 440s has a 64 byte burst length */
+	out32 (EMAC_RX_HI_LO_WMARK + hw_addr, 0x80009000);
+#else
+	/* 405s have a 16 byte burst length */
+	out32 (EMAC_RX_HI_LO_WMARK + hw_addr, 0x0f002000);
+#endif /* defined(CONFIG_440) */
+	out32 (EMAC_TXM1 + hw_addr, 0xf8640000);
+
+	/* Set fifo limit entry in tx mode 0 */
+	out32 (EMAC_TXM0 + hw_addr, 0x00000003);
+	/* Frame gap set */
+	out32 (EMAC_I_FRAME_GAP_REG + hw_addr, 0x00000008);
+	sync ();
+}
+
+static void ether_post_halt (int devnum, int hw_addr)
+{
+	int i = 0;
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+	unsigned long mfr;
+#endif
+
+	/* 1st reset MAL channel */
+	/* Note: writing a 0 to a channel has no effect */
+#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
+	mtdcr (maltxcarr, MAL_TXRX_CASR >> (devnum * 2));
+#else
+	mtdcr (maltxcarr, MAL_TXRX_CASR >> devnum);
+#endif
+	mtdcr (malrxcarr, MAL_TXRX_CASR >> devnum);
+
+	/* wait for reset */
+	while (mfdcr (malrxcasr) & (MAL_TXRX_CASR >> devnum)) {
+		if (i++ >= 1000)
+			break;
+		udelay (1000);
+	}
+	/* emac reset */
+	out32 (EMAC_M0 + hw_addr, EMAC_M0_SRST);
+
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+	/* remove clocks for EMAC internal loopback  */
+	mfsdr (sdr_mfr, mfr);
+	mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(devnum);
+	mtsdr (sdr_mfr, mfr);
+#endif
+}
+
+static void ether_post_send (int devnum, int hw_addr, void *packet, int length)
+{
+	int i = 0;
+
+	while (tx.ctrl & MAL_TX_CTRL_READY) {
+		if (i++ > 100) {
+			printf ("TX timeout\n");
+			return;
+		}
+		udelay (1000);
+	}
+	tx.ctrl = MAL_TX_CTRL_READY | MAL_TX_CTRL_WRAP | MAL_TX_CTRL_LAST |
+		EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP;
+	tx.data_len = length;
+	memcpy (tx.data_ptr, packet, length);
+	sync ();
+
+	out32 (EMAC_TXM0 + hw_addr, in32 (EMAC_TXM0 + hw_addr) | EMAC_TXM0_GNP0);
+	sync ();
+}
+
+static int ether_post_recv (int devnum, int hw_addr, void *packet, int max_length)
+{
+	int length;
+	int i = 0;
+
+	while (rx.ctrl & MAL_RX_CTRL_EMPTY) {
+		if (i++ > 100) {
+			printf ("RX timeout\n");
+			return 0;
+		}
+		udelay (1000);
+	}
+	length = rx.data_len - 4;
+	if (length <= max_length)
+		memcpy(packet, rx.data_ptr, length);
+	sync ();
+
+	rx.ctrl |= MAL_RX_CTRL_EMPTY;
+	sync ();
+
+	return length;
+}
+
+  /*
+   * Test routines
+   */
+
+static void packet_fill (char *packet, int length)
+{
+	char c = (char) length;
+	int i;
+
+	/* set up ethernet header */
+	memset (packet, 0xff, 14);
+
+	for (i = 14; i < length; i++) {
+		packet[i] = c++;
+	}
+}
+
+static int packet_check (char *packet, int length)
+{
+	char c = (char) length;
+	int i;
+
+	for (i = 14; i < length; i++) {
+		if (packet[i] != c++)
+			return -1;
+	}
+
+	return 0;
+}
+
+static int test_ctlr (int devnum, int hw_addr)
+{
+	int res = -1;
+	char packet_send[MAX_PACKET_LENGTH];
+	char packet_recv[MAX_PACKET_LENGTH];
+	int length;
+	int i;
+	int l;
+
+	ether_post_init (devnum, hw_addr);
+
+	for (i = 0; i < TEST_NUM; i++) {
+		for (l = MIN_PACKET_LENGTH; l <= MAX_PACKET_LENGTH; l++) {
+			packet_fill (packet_send, l);
+
+			ether_post_send (devnum, hw_addr, packet_send, l);
+
+			length = ether_post_recv (devnum, hw_addr, packet_recv,
+						  sizeof (packet_recv));
+
+			if (length != l || packet_check (packet_recv, length) < 0) {
+				goto Done;
+			}
+		}
+	}
+
+	res = 0;
+
+Done:
+
+	ether_post_halt (devnum, hw_addr);
+
+	if (res != 0) {
+		post_log ("EMAC%d test failed\n", devnum);
+	}
+
+	return res;
+}
+
+int ether_post_test (int flags)
+{
+	int res = 0;
+
+	/* Allocate tx & rx packet buffers */
+	tx_buf = malloc (PKTSIZE_ALIGN + CFG_CACHELINE_SIZE);
+	rx_buf = malloc (PKTSIZE_ALIGN + CFG_CACHELINE_SIZE);
+
+	if (!tx_buf || !rx_buf) {
+		printf ("Failed to allocate packet buffers\n");
+		res = -1;
+		goto out_free;
+	}
+
+	/* EMAC0 */
+	if (test_ctlr (0, 0))
+		res = -1;
+
+	/* EMAC1 */
+	if (test_ctlr (1, 0x100))
+		res = -1;
+
+out_free:
+	free (tx_buf);
+	free (rx_buf);
+
+	return res;
+}
+
+#endif /* CONFIG_POST & CFG_POST_ETHER */
+#endif /* CONFIG_POST */