Merge git://git.denx.de/u-boot-pxa

14 files changed, 45 insertions, 59 deletions

diff --git a/include/configs/balloon3.h b/include/configs/balloon3.h
index 2f5a6609b8..848a15832f 100644
--- a/include/configs/balloon3.h
+++ b/include/configs/balloon3.h
@@ -13,7 +13,7 @@
  * High Level Board Configuration Options
  */
 #define	CONFIG_CPU_PXA27X		1	/* Marvell PXA270 CPU */
-#define	CONFIG_BALLOON3		1	/* Balloon3 board */
+#define	CONFIG_BALLOON3			1	/* Balloon3 board */
 
 /*
  * Environment settings
@@ -84,18 +84,17 @@
 /*
  * Clock Configuration
  */
-#undef	CONFIG_SYS_CLKS_IN_HZ
 #define	CONFIG_SYS_CPUSPEED		0x290		/* 520MHz */
 
 /*
  * DRAM Map
  */
-#define	CONFIG_NR_DRAM_BANKS		3		/* 2 banks of DRAM */
+#define	CONFIG_NR_DRAM_BANKS		3		/* 3 banks of DRAM */
 #define	PHYS_SDRAM_1			0xa0000000	/* SDRAM Bank #1 */
 #define	PHYS_SDRAM_1_SIZE		0x08000000	/* 128 MB */
 #define	PHYS_SDRAM_2			0xb0000000	/* SDRAM Bank #2 */
 #define	PHYS_SDRAM_2_SIZE		0x08000000	/* 128 MB */
-#define	PHYS_SDRAM_3			0x80000000	/* SDRAM Bank #2 */
+#define	PHYS_SDRAM_3			0x80000000	/* SDRAM Bank #3 */
 #define	PHYS_SDRAM_3_SIZE		0x08000000	/* 128 MB */
 
 #define	CONFIG_SYS_DRAM_BASE		0xa0000000	/* CS0 */
@@ -135,7 +134,7 @@
 #define	CONFIG_ENV_IS_IN_FLASH
 #else
 #define	CONFIG_SYS_NO_FLASH
-#define	CONFIG_SYS_ENV_IS_NOWHERE
+#define	CONFIG_ENV_IS_NOWHERE
 #endif
 
 #define	CONFIG_SYS_MONITOR_BASE		0x000000
@@ -191,7 +190,6 @@
 #define	CONFIG_SYS_MDMRS_VAL	0x00220022
 #define	CONFIG_SYS_FLYCNFG_VAL	0x00000000
 #define	CONFIG_SYS_SXCNFG_VAL	0x00000000
-#define	CONFIG_SYS_MEM_BUF_IMP	0x0f
 
 /*
  * PCMCIA and CF Interfaces
diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h
index 08bd276b44..7fc364e838 100644
--- a/include/configs/colibri_pxa270.h
+++ b/include/configs/colibri_pxa270.h
@@ -2,18 +2,22 @@
  * Toradex Colibri PXA270 configuration file
  *
  * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ * Copyright (C) 2015 Marcel Ziswiler <marcel@ziswiler.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#ifndef __CONFIG_H
-#define __CONFIG_H
+#ifndef	__CONFIG_H
+#define	__CONFIG_H
 
 /*
  * High Level Board Configuration Options
  */
 #define	CONFIG_CPU_PXA27X		1	/* Marvell PXA270 CPU */
+#define CONFIG_SYS_GENERIC_BOARD
 #define	CONFIG_SYS_TEXT_BASE		0x0
+/* Avoid overwriting factory configuration block */
+#define CONFIG_BOARD_SIZE_LIMIT		0x40000
 
 /*
  * Environment settings
@@ -22,13 +26,13 @@
 #define	CONFIG_SYS_MALLOC_LEN		(128 * 1024)
 #define	CONFIG_ARCH_CPU_INIT
 #define	CONFIG_BOOTCOMMAND						\
-	"if mmc init && fatload mmc 0 0xa0000000 uImage; then "		\
+	"if fatload mmc 0 0xa0000000 uImage; then "			\
 		"bootm 0xa0000000; "					\
 	"fi; "								\
 	"if usb reset && fatload usb 0 0xa0000000 uImage; then "	\
 		"bootm 0xa0000000; "					\
 	"fi; "								\
-	"bootm 0x80000;"
+	"bootm 0xc0000;"
 #define	CONFIG_BOOTARGS			"console=tty0 console=ttyS0,115200"
 #define	CONFIG_TIMESTAMP
 #define	CONFIG_BOOTDELAY		2	/* Autoboot delay */
@@ -50,6 +54,8 @@
  */
 #include <config_cmd_default.h>
 
+#undef CONFIG_CMD_LOADB			/* Both together */
+#undef CONFIG_CMD_LOADS			/* saves 10 KB */
 #define	CONFIG_CMD_NET
 #define	CONFIG_CMD_ENV
 #undef	CONFIG_CMD_IMLS
@@ -59,7 +65,6 @@
 
 /*
  * Networking Configuration
- *  chip on the Voipac PXA270 board
  */
 #ifdef	CONFIG_CMD_NET
 #define	CONFIG_CMD_PING
@@ -82,7 +87,7 @@
  */
 #define	CONFIG_SYS_HUSH_PARSER		1
 
-#define	CONFIG_SYS_LONGHELP
+#undef	CONFIG_SYS_LONGHELP		/* Saves 10 KB */
 #ifdef	CONFIG_SYS_HUSH_PARSER
 #define	CONFIG_SYS_PROMPT		"$ "
 #else
@@ -96,7 +101,6 @@
 #define	CONFIG_CMDLINE_EDITING		1
 #define	CONFIG_AUTO_COMPLETE		1
 
-
 /*
  * Clock Configuration
  */
@@ -142,25 +146,24 @@
 
 #else	/* No flash */
 #define	CONFIG_SYS_NO_FLASH
-#define	CONFIG_SYS_ENV_IS_NOWHERE
+#define	CONFIG_ENV_IS_NOWHERE
 #endif
 
 #define	CONFIG_SYS_MONITOR_BASE		0x0
-#define	CONFIG_SYS_MONITOR_LEN		0x80000
+#define	CONFIG_SYS_MONITOR_LEN		0x40000
 
+/* Skip factory configuration block */
 #define	CONFIG_ENV_ADDR			\
-			(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+			(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN + 0x40000)
 #define	CONFIG_ENV_SIZE			0x40000
 #define	CONFIG_ENV_SECT_SIZE		0x40000
-#define CONFIG_ENV_ADDR_REDUND		(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND		(CONFIG_ENV_SIZE)
 
 /*
  * GPIO settings
  */
 #define	CONFIG_SYS_GPSR0_VAL	0x00000000
 #define	CONFIG_SYS_GPSR1_VAL	0x00020000
-#define	CONFIG_SYS_GPSR2_VAL	0x0002C000
+#define	CONFIG_SYS_GPSR2_VAL	0x0002c000
 #define	CONFIG_SYS_GPSR3_VAL	0x00000000
 
 #define	CONFIG_SYS_GPCR0_VAL	0x00000000
@@ -168,19 +171,19 @@
 #define	CONFIG_SYS_GPCR2_VAL	0x00000000
 #define	CONFIG_SYS_GPCR3_VAL	0x00000000
 
-#define	CONFIG_SYS_GPDR0_VAL	0x08000000
-#define	CONFIG_SYS_GPDR1_VAL	0x0002A981
-#define	CONFIG_SYS_GPDR2_VAL	0x0202FC00
-#define	CONFIG_SYS_GPDR3_VAL	0x00000000
+#define	CONFIG_SYS_GPDR0_VAL	0xc8008000
+#define	CONFIG_SYS_GPDR1_VAL	0xfc02a981
+#define	CONFIG_SYS_GPDR2_VAL	0x92c3ffff
+#define	CONFIG_SYS_GPDR3_VAL	0x0061e804
 
-#define	CONFIG_SYS_GAFR0_L_VAL	0x00100000
-#define	CONFIG_SYS_GAFR0_U_VAL	0x00C00010
-#define	CONFIG_SYS_GAFR1_L_VAL	0x999A901A
-#define	CONFIG_SYS_GAFR1_U_VAL	0xAAA00008
-#define	CONFIG_SYS_GAFR2_L_VAL	0xAAAAAAAA
-#define	CONFIG_SYS_GAFR2_U_VAL	0x0109A000
-#define	CONFIG_SYS_GAFR3_L_VAL	0x54000300
-#define	CONFIG_SYS_GAFR3_U_VAL	0x00024001
+#define	CONFIG_SYS_GAFR0_L_VAL	0x80100000
+#define	CONFIG_SYS_GAFR0_U_VAL	0xa5c00010
+#define	CONFIG_SYS_GAFR1_L_VAL	0x6992901a
+#define	CONFIG_SYS_GAFR1_U_VAL	0xaaa50008
+#define	CONFIG_SYS_GAFR2_L_VAL	0xaaaaaaaa
+#define	CONFIG_SYS_GAFR2_U_VAL	0x4109a002
+#define	CONFIG_SYS_GAFR3_L_VAL	0x54000310
+#define	CONFIG_SYS_GAFR3_U_VAL	0x00005401
 
 #define	CONFIG_SYS_PSSR_VAL	0x30
 
@@ -193,26 +196,26 @@
 /*
  * Memory settings
  */
-#define	CONFIG_SYS_MSC0_VAL	0x000095f2
-#define	CONFIG_SYS_MSC1_VAL	0x00007ff4
-#define	CONFIG_SYS_MSC2_VAL	0x00000000
-#define	CONFIG_SYS_MDCNFG_VAL	0x08000ac9
-#define	CONFIG_SYS_MDREFR_VAL	0x2013e01e
-#define	CONFIG_SYS_MDMRS_VAL	0x00320032
-#define	CONFIG_SYS_FLYCNFG_VAL	0x00000000
+#define	CONFIG_SYS_MSC0_VAL	0x9ee1c5f2
+#define	CONFIG_SYS_MSC1_VAL	0x9ee1f994
+#define	CONFIG_SYS_MSC2_VAL	0x9ee19ee1
+#define	CONFIG_SYS_MDCNFG_VAL	0x090009c9
+#define	CONFIG_SYS_MDREFR_VAL	0x2003a031
+#define	CONFIG_SYS_MDMRS_VAL	0x00220022
+#define	CONFIG_SYS_FLYCNFG_VAL	0x00010001
 #define	CONFIG_SYS_SXCNFG_VAL	0x40044004
 
 /*
  * PCMCIA and CF Interfaces
  */
-#define	CONFIG_SYS_MECR_VAL	0x00000001
-#define	CONFIG_SYS_MCMEM0_VAL	0x00014307
+#define	CONFIG_SYS_MECR_VAL	0x00000000
+#define	CONFIG_SYS_MCMEM0_VAL	0x00028307
 #define	CONFIG_SYS_MCMEM1_VAL	0x00014307
-#define	CONFIG_SYS_MCATT0_VAL	0x0001c787
+#define	CONFIG_SYS_MCATT0_VAL	0x00038787
 #define	CONFIG_SYS_MCATT1_VAL	0x0001c787
-#define	CONFIG_SYS_MCIO0_VAL	0x0001430f
+#define	CONFIG_SYS_MCIO0_VAL	0x0002830f
 #define	CONFIG_SYS_MCIO1_VAL	0x0001430f
 
 #include "pxa-common.h"
 
-#endif	/* __CONFIG_H */
+#endif /* __CONFIG_H */
diff --git a/include/configs/flea3.h b/include/configs/flea3.h
index bf02829cde..edff0f54cf 100644
--- a/include/configs/flea3.h
+++ b/include/configs/flea3.h
@@ -124,8 +124,6 @@
 #define CONFIG_SYS_MEMTEST_START	0	/* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x10000
 
-#undef	CONFIG_SYS_CLKS_IN_HZ	/* everything, incl board info, in Hz */
-
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
 /*
diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index a145f0812f..603d17cef6 100644
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -146,8 +146,6 @@
 #define CONFIG_SYS_MEMTEST_START	0	/* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x10000
 
-#undef	CONFIG_SYS_CLKS_IN_HZ	/* everything, incl board info, in Hz */
-
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
 /*
diff --git a/include/configs/palmld.h b/include/configs/palmld.h
index 9480d8daf2..7dbc9aee3a 100644
--- a/include/configs/palmld.h
+++ b/include/configs/palmld.h
@@ -114,7 +114,6 @@
 /*
  * Clock Configuration
  */
-#undef	CONFIG_SYS_CLKS_IN_HZ
 #define	CONFIG_SYS_CPUSPEED		0x210		/* 416MHz ; N=2,L=16 */
 
 /*
diff --git a/include/configs/palmtc.h b/include/configs/palmtc.h
index 8abce1b425..75506b22f3 100644
--- a/include/configs/palmtc.h
+++ b/include/configs/palmtc.h
@@ -116,7 +116,6 @@
 /*
  * Clock Configuration
  */
-#undef	CONFIG_SYS_CLKS_IN_HZ
 #define	CONFIG_SYS_CPUSPEED		0x161		/* 400MHz;L=1 M=3 T=1 */
 
 /*
diff --git a/include/configs/palmtreo680.h b/include/configs/palmtreo680.h
index 6490be5504..bd0f44b0d8 100644
--- a/include/configs/palmtreo680.h
+++ b/include/configs/palmtreo680.h
@@ -117,7 +117,6 @@
 /*
  * Clock Configuration
  */
-#undef  CONFIG_SYS_CLKS_IN_HZ
 #define CONFIG_SYS_CPUSPEED             0x210           /* 416MHz ; N=2,L=16 */
 
 /*
diff --git a/include/configs/snowball.h b/include/configs/snowball.h
index dacb5604cd..126201cf96 100644
--- a/include/configs/snowball.h
+++ b/include/configs/snowball.h
@@ -175,7 +175,6 @@
 #define CONFIG_SYS_MAXARGS	32	/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */
 
-#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 #define CONFIG_SYS_LOAD_ADDR		0x00100000 /* default load address */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1
 
diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h
index 87a4efcd5a..f69a559926 100644
--- a/include/configs/ti816x_evm.h
+++ b/include/configs/ti816x_evm.h
@@ -58,7 +58,6 @@
 		+ sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* boot arg buffer size */
 
-#undef  CONFIG_SYS_CLKS_IN_HZ
 #define CONFIG_SYS_LOAD_ADDR		0x81000000 /* Default load address */
 
 #define CONFIG_CMD_ASKEN
diff --git a/include/configs/u8500_href.h b/include/configs/u8500_href.h
index 8d7970a376..5302b1fb81 100644
--- a/include/configs/u8500_href.h
+++ b/include/configs/u8500_href.h
@@ -131,7 +131,6 @@
 #define CONFIG_SYS_MAXARGS	32	/* max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */
 
-#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 #define CONFIG_SYS_LOAD_ADDR		0x00100000 /* default load address */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE
 
diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h
index 2dea921045..989e755279 100644
--- a/include/configs/vexpress_common.h
+++ b/include/configs/vexpress_common.h
@@ -188,7 +188,6 @@
 #define CONFIG_BOOTP_PXE_CLIENTARCH	0x100
 
 /* Miscellaneous configurable options */
-#undef	CONFIG_SYS_CLKS_IN_HZ
 #define CONFIG_SYS_LOAD_ADDR		(V2M_BASE + 0x8000)
 #define LINUX_BOOT_PARAM_ADDR		(V2M_BASE + 0x2000)
 #define CONFIG_BOOTDELAY		2
diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h
index 2fb91a8f8c..887433b16f 100644
--- a/include/configs/vpac270.h
+++ b/include/configs/vpac270.h
@@ -221,7 +221,7 @@
 
 #else	/* No flash */
 #define	CONFIG_SYS_NO_FLASH
-#define	CONFIG_SYS_ENV_IS_NOWHERE
+#define	CONFIG_ENV_IS_NOWHERE
 #endif
 
 /*
@@ -297,7 +297,6 @@
 #define	CONFIG_SYS_MDMRS_VAL	0x00000000
 #define	CONFIG_SYS_FLYCNFG_VAL	0x00000000
 #define	CONFIG_SYS_SXCNFG_VAL	0x40044004
-#define	CONFIG_SYS_MEM_BUF_IMP	0x0f
 
 /*
  * PCMCIA and CF Interfaces
diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h
index c7a17f7a49..8e1c7a44cc 100644
--- a/include/configs/woodburn_common.h
+++ b/include/configs/woodburn_common.h
@@ -146,8 +146,6 @@
 #define CONFIG_SYS_MEMTEST_START	0	/* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x10000
 
-#undef	CONFIG_SYS_CLKS_IN_HZ	/* everything, incl board info, in Hz */
-
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
 /*
diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h
index fe331bc082..1dbbc15256 100644
--- a/include/configs/zipitz2.h
+++ b/include/configs/zipitz2.h
@@ -136,7 +136,6 @@ unsigned char zipitz2_spi_read(void);
 /*
  * Clock Configuration
  */
-#undef	CONFIG_SYS_CLKS_IN_HZ
 #define CONFIG_SYS_CPUSPEED		0x190		/* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */
 
 /*