ARM: remove broken "mx1fs2" board

Signed-off-by: Wolfgang Denk <wd@denx.de>

1 files changed, 0 insertions, 305 deletions

diff --git a/include/configs/mx1fs2.h b/include/configs/mx1fs2.h
deleted file mode 100644
index ddbc65afa2..0000000000
--- a/include/configs/mx1fs2.h
+++ /dev/null
@@ -1,305 +0,0 @@
-/*
- * Copyright (C) 2004 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_ARM920T	   1	 /* this is an ARM920T CPU     */
-#define CONFIG_IMX	   1	 /* in a Motorola MC9328MXL Chip */
-#define CONFIG_MX1FS2	   1	 /* on a mx1fs2 board */
-#undef	CONFIG_USE_IRQ		 /* don't need use IRQ/FIQ    */
-
-/*
- * Select serial console configuration
- */
-#undef	_CONFIG_UART1 /* internal uart 1 */
-#define _CONFIG_UART2 /* internal uart 2 */
-#undef	_CONFIG_UART3 /* internal uart 3 */
-#undef	_CONFIG_UART4 /* internal uart 4 */
-#undef	CONFIG_SILENT_CONSOLE  /* use this to disable output */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_JFFS2
-
-#undef CONFIG_CMD_CONSOLE
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_PING
-#undef CONFIG_CMD_SOURCE
-
-/*
- * Boot options. Setting delay to -1 stops autostart count down.
- */
-#define CONFIG_BOOTDELAY   10
-#define CONFIG_BOOTARGS	   "root=/dev/mtdblock4 console=ttySMX0,115200n8 rootfstype=jffs2"
-#define CONFIG_BOOTCOMMAND "bootm 10080000"
-#define CONFIG_SHOW_BOOT_PROGRESS
-
-/*
- * General options for u-boot. Modify to save memory foot print
- */
-#define CONFIG_SYS_LONGHELP				      /* undef saves memory  */
-#define CONFIG_SYS_PROMPT		"mx1fs2> "	      /* prompt string	     */
-#define CONFIG_SYS_CBSIZE		256		      /* console I/O buffer  */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* print buffer size   */
-#define CONFIG_SYS_MAXARGS		16		      /* max command args    */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	      /* boot args buf size  */
-
-#define CONFIG_SYS_MEMTEST_START	0x08100000	      /* memtest test area   */
-#define CONFIG_SYS_MEMTEST_END		0x08F00000
-
-#define CONFIG_SYS_HZ			3686400	     /* incrementer freq: 3.6864 MHz */
-#define CONFIG_SYS_CPUSPEED		0x141	     /* core clock - register value  */
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_BAUDRATE 115200
-/*
- * Definitions related to passing arguments to kernel.
- */
-#define CONFIG_CMDLINE_TAG	     1	 /* send commandline to Kernel	     */
-#define CONFIG_SETUP_MEMORY_TAGS     1	 /* send memory definition to kernel */
-#define	 CONFIG_INITRD_TAG	     1	   /* send initrd params	*/
-
-/*
- * Malloc pool need to host env + 128 Kb reserve for other allocations.
- */
-#define CONFIG_SYS_MALLOC_LEN	  (CONFIG_ENV_SIZE + (128<<10) )
-
-#define CONFIG_STACKSIZE	(120<<10)      /* stack size */
-
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	(4<<10)	       /* IRQ stack  */
-#define CONFIG_STACKSIZE_FIQ	(4<<10)	       /* FIQ stack  */
-#endif
-
-/* SDRAM Setup Values
- * 0x910a8300 Precharge Command CAS 3
- * 0x910a8200 Precharge Command CAS 2
- *
- * 0xa10a8300 AutoRefresh Command CAS 3
- * 0xa10a8200 Set AutoRefresh Command CAS 2
- */
-#define PRECHARGE_CMD 0x910a8300
-#define AUTOREFRESH_CMD 0xa10a8300
-
-#define BUS32BIT_VERSION
-/*
- * SDRAM Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS  1			     /* we have 1 bank of SDRAM */
-#define MX1FS2_SDRAM_1	      0x08000000	     /* SDRAM bank #1		*/
-#ifdef BUS32BIT_VERSION
-#define MX1FS2_SDRAM_1_SIZE  (0x04000000 - 0x100000) /* 64 MB - 1M Framebuffer */
-#else
-#define MX1FS2_SDRAM_1_SIZE  (0x01FC0000 - 0x100000) /* 32 MB - 1M Framebuffer */
-#endif
-/*
- * Flash Controller settings
- */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* FLASH banks count (not chip count)*/
-#define CONFIG_SYS_MAX_FLASH_SECT	256	/* number of sector in FLASH bank    */
-
-#ifdef BUS32BIT_VERSION
-#define MX1FS2_FLASH_BUS_WIDTH	4	/* we use 32 bit FLASH memory...     */
-#define MX1FS2_FLASH_INTERLEAVE 2	/* ... made of 2 chips */
-#define MX1FS2_FLASH_BANK_SIZE	0x02000000  /* size of one flash bank*/
-#define MX1FS2_FLASH_SECT_SIZE	0x00020000  /* size of erase sector */
-#else
-#define MX1FS2_FLASH_BUS_WIDTH	2	/* we use 16 bit FLASH memory...     */
-#define MX1FS2_FLASH_INTERLEAVE 1	/* ... made of 1 chip */
-#define MX1FS2_FLASH_BANK_SIZE	0x01000000  /* size of one flash bank*/
-#define MX1FS2_FLASH_SECT_SIZE	0x00010000  /* size of erase sector */
-#endif
-#define MX1FS2_FLASH_BASE	0x10000000  /* location of flash memory */
-#define MX1FS2_FLASH_UNLOCK	   1	   /* perform hw unlock first */
-
-/* This should be defined if CFI FLASH device is present. Actually benefit
-   is not so clear to me. In other words we can provide more informations
-   to user, but this expects more complex flash handling we do not provide
-   now.*/
-#undef	CONFIG_SYS_FLASH_CFI
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ)    /* timeout for Erase operation */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ)    /* timeout for Write operation */
-
-#define CONFIG_SYS_FLASH_BASE		MX1FS2_FLASH_BASE
-
-/*
- * This is setting for JFFS2 support in u-boot.
- * Right now there is no gain for user, but later on booting kernel might be
- * possible. Consider using XIP kernel running from flash to save RAM
- * footprint.
- * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
- */
-
-/*
- * JFFS2 partitions
- */
-/* No command line, one static partition, whole device */
-/*
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV		"nor0"
-#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET	0x00050000
-*/
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
-#define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT		"nor0=mx1fs2-0"
-
-#ifdef BUS32BIT_VERSION
-#define MTDPARTS_DEFAULT	"mtdparts=mx1fs2-0:2m@5m(part0),5m@9m(part1)"
-#else
-#define MTDPARTS_DEFAULT	"mtdparts=mx1fs2-0:-@320k(jffs2)"
-#endif
-
-/*
- * Environment setup. Definitions of monitor location and size with
- * definition of environment setup ends up in 2 possibilities.
- * 1. Embeded environment - in u-boot code is space for environment
- * 2. Environment is read from predefined sector of flash
- * Right now we support 2. possiblity, but expecting no env placed
- * on mentioned address right now. This also needs to provide whole
- * sector for it - for us 256Kb is really waste of memory. U-boot uses
- * default env. and until kernel parameters could be sent to kernel
- * env. has no sense to us.
- */
-
-#define CONFIG_SYS_MONITOR_BASE	0x10000000
-#define CONFIG_SYS_MONITOR_LEN		0x20000		/* 128b ( 1 flash sector )   */
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR		0x10020000	/* absolute address for now  */
-#define CONFIG_ENV_SIZE		0x20000
-
-#define	 CONFIG_ENV_OVERWRITE	1		/* env is not writable now   */
-
-/* Setup CS4 and CS5 */
-#define CONFIG_SYS_GIUS_A_VAL		0x0003fffe
-
-/*
- * CSxU_VAL:
- * 63| x	x x x | x x x x | x x  x    x | x x x x | x x x x | x x x x | x x x x | x x x x|32
- *   |DTACK_SEL|0|BCD |	  BCS	| PSZ|PME|SYNC|	 DOL	| CNC|	  WSC	    | 0| WWS  |	  EDC  |
- *
- * CSxL_VAL:
- * 31| x x x x | x x x x | x x x x | x x x x | x x x x |  x x x x | x x	 x x | x x  x	 x| 0
- *   |	 OEA   |   OEN	 |   WEA   |   WEN   |	 CSA   |EBC| DSZ  | 0|SP|0|WP| 0 0|PA|CSEN|
- */
-
-#define CONFIG_SYS_CS0U_VAL 0x00008C00
-#define CONFIG_SYS_CS0L_VAL 0x22222601
-#define CONFIG_SYS_CS1U_VAL 0x00008C00
-#define CONFIG_SYS_CS1L_VAL 0x22222301
-#define CONFIG_SYS_CS4U_VAL 0x00008C00
-#define CONFIG_SYS_CS4L_VAL 0x22222301
-#define CONFIG_SYS_CS5U_VAL 0x00008C00
-#define CONFIG_SYS_CS5L_VAL 0x22222301
-
-/* f_{dpll}=2*f{ref}*(MFI+MFN/(MFD+1))/(PD+1)
-   f_ref=16,777MHz
-
-   0x002a141f: 191,9944MHz
-   0x040b2007: 144MHz
-   0x042a141f: 96MHz
-   0x0811140d: 64MHz
-   0x040e200e: 150MHz
-   0x00321431: 200MHz
-
-   0x08001800: 64MHz mit 16er Quarz
-   0x04001800: 96MHz mit 16er Quarz
-   0x04002400: 144MHz mit 16er Quarz
-
-   31 |x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x| 0
-      |XXX|--PD---|-------MFD---------|XXX|--MFI--|-----MFN-----------|	    */
-
-#define CONFIG_SYS_MPCTL0_VAL		0x07E723AD
-#define CONFIG_SYS_MPCTL1_VAL		0x00000040
-#define CONFIG_SYS_PCDR_VAL		0x00010005
-#define CONFIG_SYS_GPCR_VAL		0x00000FFB
-
-#define USE_16M_OSZI /* If you have one, you want to use it
-			The internal 32kHz oszillator jitters */
-#ifdef USE_16M_OSZI
-
-#define CONFIG_SYS_SPCTL0_VAL		0x04001401
-#define CONFIG_SYS_SPCTL1_VAL		0x0C000040
-#define CONFIG_SYS_CSCR_VAL		0x07030003
-#define CONFIG_SYS_CLK_FREQ	16780000
-#define CONFIG_SYSPLL_CLK_FREQ	16000000
-
-#else
-
-#define CONFIG_SYS_SPCTL0_VAL		0x07E716D1
-#define CONFIG_SYS_CSCR_VAL		0x06000003
-#define CONFIG_SYS_CLK_FREQ	16780000
-#define CONFIG_SYSPLL_CLK_FREQ	16780000
-
-#endif
-
-/*
- * Well this has to be defined, but on the other hand it is used differently
- * one may expect. For instance loadb command do not cares :-)
- * So advice is - do not relay on this...
- */
-#define CONFIG_SYS_LOAD_ADDR		0x08400000
-
-#define CONFIG_SYS_FMCR_VAL		0x00000003 /* Reset Default */
-
-/* Bit[0:3] contain PERCLK1DIV for UART 1
-   0x000b00b ->b<- -> 192MHz/12=16MHz
-   0x000b00b ->8<- -> 144MHz/09=16MHz
-   0x000b00b ->3<- -> 64MHz/4=16MHz */
-
-#ifdef _CONFIG_UART1
-#define CONFIG_IMX_SERIAL
-#define CONFIG_IMX_SERIAL1
-#elif defined _CONFIG_UART2
-#define CONFIG_IMX_SERIAL
-#define CONFIG_IMX_SERIAL2
-#elif defined _CONFIG_UART3 | defined _CONFIG_UART4
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_CLK		3686400
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_CONS_INDEX	1
-#ifdef _CONFIG_UART3
-#define CONFIG_SYS_NS16550_COM1	0x15000000
-#elif defined _CONFIG_UART4
-#define CONFIG_SYS_NS16550_COM1	0x16000000
-#endif
-#endif
-
-#endif	/* __CONFIG_H */