board: ti: beagle_x15: Rename to indicate support for TI am57xx evms

BeagleBoard X15 (http://beagleboard.org/x15) support in u-boot does
actually support two different platform configuration offered by
TI. In addition to BeagleBoard X15, it also supports the TMDXEVM5728
(or more commonly known as AM5728-evm).

Information about the TI AM57xx EVM can be found here
http://www.ti.com/tool/tmdxevm5728

The EVM configuration is 1-1 compatible with BeagleBoard X15 with the
additional support for mPCIe, mSATA, LCD, touchscreen, Camera, push
button and TI's wlink8 offering.

Hence, we rename the beagle_x15 directory to am57xx to support TI
EVMs that use the AM57xx processor. By doing this we have common code
reuse. This sets the stage to have a common u-boot image solution for
multiple TI EVMs such as that already done for am335x and am437x. This
sets the stage for upcoming multiple TI EVMs that share the same code
base.

NOTE: Commit eae7ae185335 ("am437x: Add am57xx_evm_defconfig using
CONFIG_DM") introduced DT support for beagle_x15 under am57xx_evm
platform name. However, this ignored the potential confusion arising for
users as a result. To prevent this, existing beagle_x15_defconfig is
renamed as am57xx_evm_nodt_defconfig to denote that this is the "non
device tree" configuration for the same platform. We still retain
am57xx-beagle-x15.dts at this point, since we just require the common
minimum dts.

As a result of this change, users should expect changes in build
procedures('make am57xx_evm_nodt_defconfig' instead of 'make
beagle_x15_defconfig'). Hopefully, this would be a one-time change.

Signed-off-by: Steve Kipisz <s-kipisz2@ti.com>
Signed-off-by: Schuyler Patton <spatton@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Lokesh Vutla <lokeshvutla@ti.com>

1 files changed, 0 insertions, 91 deletions

diff --git a/include/configs/beagle_x15.h b/include/configs/beagle_x15.h
deleted file mode 100644
index d38b7b55cf..0000000000
--- a/include/configs/beagle_x15.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * (C) Copyright 2014
- * Texas Instruments Incorporated.
- * Felipe Balbi <balbi@ti.com>
- *
- * Configuration settings for the TI Beagle x15 board.
- * See ti_omap5_common.h for omap5 common settings.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_BEAGLE_X15_H
-#define __CONFIG_BEAGLE_X15_H
-
-#define CONFIG_AM57XX
-
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_IODELAY_RECALIBRATION
-#endif
-
-#define CONFIG_BOARD_EARLY_INIT_F
-
-#define CONFIG_NR_DRAM_BANKS		2
-
-#define CONFIG_ENV_SIZE			(64 << 10)
-#define CONFIG_ENV_IS_IN_FAT
-#define FAT_ENV_INTERFACE		"mmc"
-#define FAT_ENV_DEVICE_AND_PART		"0:1"
-#define FAT_ENV_FILE			"uboot.env"
-
-#define CONSOLEDEV			"ttyO2"
-#define CONFIG_SYS_NS16550_COM1		UART1_BASE	/* Base EVM has UART0 */
-#define CONFIG_SYS_NS16550_COM2		UART2_BASE	/* UART2 */
-#define CONFIG_SYS_NS16550_COM3		UART3_BASE	/* UART3 */
-#define CONFIG_BAUDRATE			115200
-
-#define CONFIG_SYS_OMAP_ABE_SYSCK
-
-/* Define the default GPT table for eMMC */
-#define PARTS_DEFAULT \
-	"uuid_disk=${uuid_gpt_disk};" \
-	"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
-
-#include <configs/ti_omap5_common.h>
-
-/* Enhance our eMMC support / experience. */
-#define CONFIG_CMD_GPT
-#define CONFIG_EFI_PARTITION
-
-/* CPSW Ethernet */
-#define CONFIG_CMD_DHCP
-#define CONFIG_BOOTP_DNS		/* Configurable parts of CMD_DHCP */
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_NET_RETRY_COUNT		10
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_MII
-#define CONFIG_DRIVER_TI_CPSW		/* Driver for IP block */
-#define CONFIG_MII			/* Required in net/eth.c */
-#define CONFIG_PHY_GIGE			/* per-board part of CPSW */
-#define CONFIG_PHYLIB
-#define PHY_ANEG_TIMEOUT	8000	/* PHY needs longer aneg time at 1G */
-
-#define CONFIG_SUPPORT_EMMC_BOOT
-
-/* USB xHCI HOST */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_HOST
-#define CONFIG_USB_XHCI_DWC3
-#define CONFIG_USB_XHCI
-#define CONFIG_USB_XHCI_OMAP
-#define CONFIG_USB_STORAGE
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
-
-#define CONFIG_OMAP_USB_PHY
-#define CONFIG_OMAP_USB3PHY1_HOST
-
-/* SATA */
-#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_CMD_SCSI
-#define CONFIG_LIBATA
-#define CONFIG_SCSI_AHCI
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
-#define CONFIG_SYS_SCSI_MAX_LUN		1
-#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-						CONFIG_SYS_SCSI_MAX_LUN)
-
-#endif /* __CONFIG_BEAGLE_X5_H */