Merge git://git.denx.de/u-boot-sunxi

3 files changed, 47 insertions, 6 deletions

diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
index ebfec7cf07..22335452c5 100644
--- a/drivers/mmc/sunxi_mmc.c
+++ b/drivers/mmc/sunxi_mmc.c
@@ -449,11 +449,7 @@ struct mmc *sunxi_mmc_init(int sdc_no)
 
 	cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
 	cfg->host_caps = MMC_MODE_4BIT;
-	cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
-#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN7I) || \
-    defined(CONFIG_MACH_SUN8I) || defined(CONFIG_MACH_SUN9I)
-	cfg->host_caps |= MMC_MODE_HC;
-#endif
+	cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_HC;
 	cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
 
 	cfg->f_min = 400000;
diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c
index 4646a3d9fe..fe45db1e06 100644
--- a/drivers/usb/musb-new/sunxi.c
+++ b/drivers/usb/musb-new/sunxi.c
@@ -22,7 +22,9 @@
  */
 #include <common.h>
 #include <asm/arch/cpu.h>
+#include <asm/arch/gpio.h>
 #include <asm/arch/usbc.h>
+#include <asm-generic/gpio.h>
 #include "linux-compat.h"
 #include "musb_core.h"
 
@@ -224,6 +226,33 @@ static int sunxi_musb_init(struct musb *musb)
 
 	pr_debug("%s():\n", __func__);
 
+	if (is_host_enabled(musb)) {
+		int vbus_det = sunxi_name_to_gpio(CONFIG_USB0_VBUS_DET);
+		if (vbus_det == -1) {
+			eprintf("Error invalid Vusb-det pin\n");
+			return -EINVAL;
+		}
+
+		err = gpio_request(vbus_det, "vbus0_det");
+		if (err)
+			return err;
+
+		err = gpio_direction_input(vbus_det);
+		if (err) {
+			gpio_free(vbus_det);
+			return err;
+		}
+
+		err = gpio_get_value(vbus_det);
+		if (err) {
+			eprintf("Error: A charger is plugged into the OTG\n");
+			gpio_free(vbus_det);
+			return -EIO;
+		}
+
+		gpio_free(vbus_det);
+	}
+
 	err = sunxi_usbc_request_resources(0);
 	if (err)
 		return err;
diff --git a/drivers/video/sunxi_display.c b/drivers/video/sunxi_display.c
index dbda97e746..4e12150027 100644
--- a/drivers/video/sunxi_display.c
+++ b/drivers/video/sunxi_display.c
@@ -18,6 +18,7 @@
 #include <errno.h>
 #include <fdtdec.h>
 #include <fdt_support.h>
+#include <i2c.h>
 #include <video_fb.h>
 #include "videomodes.h"
 #include "hitachi_tx18d42vm_lcd.h"
@@ -592,7 +593,7 @@ static void sunxi_lcdc_enable(void)
 
 static void sunxi_lcdc_panel_enable(void)
 {
-	int pin;
+	int pin, reset_pin;
 
 	/*
 	 * Start with backlight disabled to avoid the screen flashing to
@@ -610,6 +611,12 @@ static void sunxi_lcdc_panel_enable(void)
 		gpio_direction_output(pin, PWM_OFF);
 	}
 
+	reset_pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_RESET);
+	if (reset_pin != -1) {
+		gpio_request(reset_pin, "lcd_reset");
+		gpio_direction_output(reset_pin, 0); /* Assert reset */
+	}
+
 	/* Give the backlight some time to turn off and power up the panel. */
 	mdelay(40);
 	pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_POWER);
@@ -617,6 +624,9 @@ static void sunxi_lcdc_panel_enable(void)
 		gpio_request(pin, "lcd_power");
 		gpio_direction_output(pin, 1);
 	}
+
+	if (reset_pin != -1)
+		gpio_direction_output(reset_pin, 1); /* De-assert reset */
 }
 
 static void sunxi_lcdc_backlight_enable(void)
@@ -1021,6 +1031,12 @@ static void sunxi_mode_set(const struct ctfb_res_modes *mode,
 			mdelay(50); /* Wait for lcd controller power on */
 			hitachi_tx18d42vm_init();
 		}
+		if (IS_ENABLED(CONFIG_VIDEO_LCD_TL059WV5C0)) {
+			unsigned int orig_i2c_bus = i2c_get_bus_num();
+			i2c_set_bus_num(CONFIG_VIDEO_LCD_I2C_BUS);
+			i2c_reg_write(0x5c, 0x04, 0x42); /* Turn on the LCD */
+			i2c_set_bus_num(orig_i2c_bus);
+		}
 		sunxi_composer_mode_set(mode, address);
 		sunxi_lcdc_tcon0_mode_set(mode, false);
 		sunxi_composer_enable();