Merge branch 'master' of git://git.denx.de/u-boot-arm

3 files changed, 103 insertions, 91 deletions

diff --git a/drivers/mmc/pxa_mmc.c b/drivers/mmc/pxa_mmc.c
index 87769033bb..48e21ef7a5 100644
--- a/drivers/mmc/pxa_mmc.c
+++ b/drivers/mmc/pxa_mmc.c
@@ -27,6 +27,7 @@
 #include <asm/errno.h>
 #include <asm/arch/hardware.h>
 #include <part.h>
+#include <asm/io.h>
 
 #include "pxa_mmc.h"
 
@@ -59,18 +60,20 @@ mmc_cmd(ushort cmd, ushort argh, ushort argl, ushort cmdat)
 
 	debug("mmc_cmd %u 0x%04x 0x%04x 0x%04x\n", cmd, argh, argl,
 	      cmdat | wide);
-	MMC_STRPCL = MMC_STRPCL_STOP_CLK;
-	MMC_I_MASK = ~MMC_I_MASK_CLK_IS_OFF;
-	while (!(MMC_I_REG & MMC_I_REG_CLK_IS_OFF)) ;
-	MMC_CMD = cmd;
-	MMC_ARGH = argh;
-	MMC_ARGL = argl;
-	MMC_CMDAT = cmdat | wide;
-	MMC_I_MASK = ~MMC_I_MASK_END_CMD_RES;
-	MMC_STRPCL = MMC_STRPCL_START_CLK;
-	while (!(MMC_I_REG & MMC_I_REG_END_CMD_RES)) ;
-
-	status = MMC_STAT;
+	writel(MMC_STRPCL_STOP_CLK, MMC_STRPCL);
+	writel(~MMC_I_MASK_CLK_IS_OFF, MMC_I_MASK);
+	while (!(readl(MMC_I_REG) & MMC_I_REG_CLK_IS_OFF))
+		;
+	writel(cmd, MMC_CMD);
+	writel(argh, MMC_ARGH);
+	writel(argl, MMC_ARGL);
+	writel(cmdat | wide, MMC_CMDAT);
+	writel(~MMC_I_MASK_END_CMD_RES, MMC_I_MASK);
+	writel(MMC_STRPCL_START_CLK, MMC_STRPCL);
+	while (!(readl(MMC_I_REG) & MMC_I_REG_END_CMD_RES))
+		;
+
+	status = readl(MMC_STAT);
 	debug("MMC status 0x%08x\n", status);
 	if (status & MMC_STAT_TIME_OUT_RESPONSE) {
 		return 0;
@@ -80,10 +83,10 @@ mmc_cmd(ushort cmd, ushort argh, ushort argl, ushort cmdat)
 	 * Did I mention this is Sick.  We always need to
 	 * discard the upper 8 bits of the first 16-bit word.
 	 */
-	a = (MMC_RES & 0xffff);
+	a = (readl(MMC_RES) & 0xffff);
 	for (i = 0; i < 4; i++) {
-		b = (MMC_RES & 0xffff);
-		c = (MMC_RES & 0xffff);
+		b = (readl(MMC_RES) & 0xffff);
+		c = (readl(MMC_RES) & 0xffff);
 		resp[i] = (a << 24) | (b << 8) | (c >> 8);
 		a = c;
 		debug("MMC resp[%d] = %#08x\n", i, resp[i]);
@@ -115,37 +118,38 @@ mmc_block_read(uchar * dst, ulong src, ulong len)
 	/* send read command */
 	argh = src >> 16;
 	argl = src & 0xffff;
-	MMC_STRPCL = MMC_STRPCL_STOP_CLK;
-	MMC_RDTO = 0xffff;
-	MMC_NOB = 1;
-	MMC_BLKLEN = len;
+	writel(MMC_STRPCL_STOP_CLK, MMC_STRPCL);
+	writel(0xffff, MMC_RDTO);
+	writel(1, MMC_NOB);
+	writel(len, MMC_BLKLEN);
 	mmc_cmd(MMC_CMD_READ_SINGLE_BLOCK, argh, argl,
 		MMC_CMDAT_R1 | MMC_CMDAT_READ | MMC_CMDAT_BLOCK |
 		MMC_CMDAT_DATA_EN);
 
-	MMC_I_MASK = ~MMC_I_MASK_RXFIFO_RD_REQ;
+	writel(~MMC_I_MASK_RXFIFO_RD_REQ, MMC_I_MASK);
 	while (len) {
-		if (MMC_I_REG & MMC_I_REG_RXFIFO_RD_REQ) {
+		if (readl(MMC_I_REG) & MMC_I_REG_RXFIFO_RD_REQ) {
 #if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
 			int i;
 			for (i = min(len, 32); i; i--) {
-				*dst++ = *((volatile uchar *)&MMC_RXFIFO);
+				*dst++ = readb(MMC_RXFIFO);
 				len--;
 			}
 #else
-			*dst++ = MMC_RXFIFO;
+			*dst++ = readb(MMC_RXFIFO);
 			len--;
 #endif
 		}
-		status = MMC_STAT;
+		status = readl(MMC_STAT);
 		if (status & MMC_STAT_ERRORS) {
 			printf("MMC_STAT error %lx\n", status);
 			return -1;
 		}
 	}
-	MMC_I_MASK = ~MMC_I_MASK_DATA_TRAN_DONE;
-	while (!(MMC_I_REG & MMC_I_REG_DATA_TRAN_DONE)) ;
-	status = MMC_STAT;
+	writel(~MMC_I_MASK_DATA_TRAN_DONE, MMC_I_MASK);
+	while (!(readl(MMC_I_REG) & MMC_I_REG_DATA_TRAN_DONE))
+		;
+	status = readl(MMC_STAT);
 	if (status & MMC_STAT_ERRORS) {
 		printf("MMC_STAT error %lx\n", status);
 		return -1;
@@ -176,37 +180,39 @@ mmc_block_write(ulong dst, uchar * src, int len)
 	/* send write command */
 	argh = dst >> 16;
 	argl = dst & 0xffff;
-	MMC_STRPCL = MMC_STRPCL_STOP_CLK;
-	MMC_NOB = 1;
-	MMC_BLKLEN = len;
+	writel(MMC_STRPCL_STOP_CLK, MMC_STRPCL);
+	writel(1, MMC_NOB);
+	writel(len, MMC_BLKLEN);
 	mmc_cmd(MMC_CMD_WRITE_SINGLE_BLOCK, argh, argl,
 		MMC_CMDAT_R1 | MMC_CMDAT_WRITE | MMC_CMDAT_BLOCK |
 		MMC_CMDAT_DATA_EN);
 
-	MMC_I_MASK = ~MMC_I_MASK_TXFIFO_WR_REQ;
+	writel(~MMC_I_MASK_TXFIFO_WR_REQ, MMC_I_MASK);
 	while (len) {
-		if (MMC_I_REG & MMC_I_REG_TXFIFO_WR_REQ) {
+		if (readl(MMC_I_REG) & MMC_I_REG_TXFIFO_WR_REQ) {
 			int i, bytes = min(32, len);
 
 			for (i = 0; i < bytes; i++) {
-				MMC_TXFIFO = *src++;
+				writel(*src++, MMC_TXFIFO);
 			}
 			if (bytes < 32) {
-				MMC_PRTBUF = MMC_PRTBUF_BUF_PART_FULL;
+				writel(MMC_PRTBUF_BUF_PART_FULL, MMC_PRTBUF);
 			}
 			len -= bytes;
 		}
-		status = MMC_STAT;
+		status = readl(MMC_STAT);
 		if (status & MMC_STAT_ERRORS) {
 			printf("MMC_STAT error %lx\n", status);
 			return -1;
 		}
 	}
-	MMC_I_MASK = ~MMC_I_MASK_DATA_TRAN_DONE;
-	while (!(MMC_I_REG & MMC_I_REG_DATA_TRAN_DONE)) ;
-	MMC_I_MASK = ~MMC_I_MASK_PRG_DONE;
-	while (!(MMC_I_REG & MMC_I_REG_PRG_DONE)) ;
-	status = MMC_STAT;
+	writel(~MMC_I_MASK_DATA_TRAN_DONE, MMC_I_MASK);
+	while (!(readl(MMC_I_REG) & MMC_I_REG_DATA_TRAN_DONE))
+		;
+	writel(~MMC_I_MASK_PRG_DONE, MMC_I_MASK);
+	while (!(readl(MMC_I_REG) & MMC_I_REG_PRG_DONE))
+		;
+	status = readl(MMC_STAT);
 	if (status & MMC_STAT_ERRORS) {
 		printf("MMC_STAT error %lx\n", status);
 		return -1;
@@ -559,13 +565,13 @@ mmc_legacy_init(int verbose)
 	set_GPIO_mode(GPIO8_MMCCS0_MD);
 #endif
 #ifdef CONFIG_CPU_MONAHANS	/* pxa3xx */
-	CKENA |= CKENA_12_MMC0 | CKENA_13_MMC1;
+	writel(readl(CKENA) | CKENA_12_MMC0 | CKENA_13_MMC1, CKENA);
 #else	/* pxa2xx */
-	CKEN |= CKEN12_MMC;	/* enable MMC unit clock */
+	writel(readl(CKEN) | CKEN12_MMC, CKEN);	/* enable MMC unit clock */
 #endif
-	MMC_CLKRT = MMC_CLKRT_0_3125MHZ;
-	MMC_RESTO = MMC_RES_TO_MAX;
-	MMC_SPI = MMC_SPI_DISABLE;
+	writel(MMC_CLKRT_0_3125MHZ, MMC_CLKRT);
+	writel(MMC_RES_TO_MAX, MMC_RESTO);
+	writel(MMC_SPI_DISABLE, MMC_SPI);
 
 	/* reset */
 	mmc_cmd(MMC_CMD_GO_IDLE_STATE, 0, 0, MMC_CMDAT_INIT | MMC_CMDAT_R0);
@@ -624,7 +630,7 @@ mmc_legacy_init(int verbose)
 		mmc_decode_cid(cid_resp);
 	}
 
-	MMC_CLKRT = 0;		/* 20 MHz */
+	writel(0, MMC_CLKRT);		/* 20 MHz */
 	resp = mmc_cmd(MMC_CMD_SELECT_CARD, rca, 0, MMC_CMDAT_R1);
 
 #if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
diff --git a/drivers/serial/serial_pxa.c b/drivers/serial/serial_pxa.c
index b74e43957f..e4579801f2 100644
--- a/drivers/serial/serial_pxa.c
+++ b/drivers/serial/serial_pxa.c
@@ -32,6 +32,7 @@
 #include <watchdog.h>
 #include <serial.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/io.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -73,60 +74,60 @@ void pxa_setbrg_dev (unsigned int uart_index)
 	switch (uart_index) {
 		case FFUART_INDEX:
 #ifdef CONFIG_CPU_MONAHANS
-			CKENA |= CKENA_22_FFUART;
+			writel(readl(CKENA) | CKENA_22_FFUART, CKENA);
 #else
-			CKEN |= CKEN6_FFUART;
+			writel(readl(CKEN) | CKEN6_FFUART, CKEN);
 #endif /* CONFIG_CPU_MONAHANS */
 
-			FFIER = 0;	/* Disable for now */
-			FFFCR = 0;	/* No fifos enabled */
+			writel(0, FFIER);	/* Disable for now */
+			writel(0, FFFCR);	/* No fifos enabled */
 
 			/* set baud rate */
-			FFLCR = LCR_WLS0 | LCR_WLS1 | LCR_DLAB;
-			FFDLL = quot & 0xff;
-			FFDLH = quot >> 8;
-			FFLCR = LCR_WLS0 | LCR_WLS1;
+			writel(LCR_WLS0 | LCR_WLS1 | LCR_DLAB, FFLCR);
+			writel(quot & 0xff, FFDLL);
+			writel(quot >> 8, FFDLH);
+			writel(LCR_WLS0 | LCR_WLS1, FFLCR);
 
-			FFIER = IER_UUE;	/* Enable FFUART */
+			writel(IER_UUE, FFIER);	/* Enable FFUART */
 		break;
 
 		case BTUART_INDEX:
 #ifdef CONFIG_CPU_MONAHANS
-			CKENA |= CKENA_21_BTUART;
+			writel(readl(CKENA) | CKENA_21_BTUART, CKENA);
 #else
-			CKEN |= CKEN7_BTUART;
+			writel(readl(CKEN) | CKEN7_BTUART, CKEN);
 #endif /*  CONFIG_CPU_MONAHANS */
 
-			BTIER = 0;
-			BTFCR = 0;
+			writel(0, BTIER);
+			writel(0, BTFCR);
 
 			/* set baud rate */
-			BTLCR = LCR_DLAB;
-			BTDLL = quot & 0xff;
-			BTDLH = quot >> 8;
-			BTLCR = LCR_WLS0 | LCR_WLS1;
+			writel(LCR_DLAB, BTLCR);
+			writel(quot & 0xff, BTDLL);
+			writel(quot >> 8, BTDLH);
+			writel(LCR_WLS0 | LCR_WLS1, BTLCR);
 
-			BTIER = IER_UUE;	/* Enable BFUART */
+			writel(IER_UUE, BTIER);	/* Enable BFUART */
 
 		break;
 
 		case STUART_INDEX:
 #ifdef CONFIG_CPU_MONAHANS
-			CKENA |= CKENA_23_STUART;
+			writel(readl(CKENA) | CKENA_23_STUART, CKENA);
 #else
-			CKEN |= CKEN5_STUART;
+			writel(readl(CKEN) | CKEN5_STUART, CKEN);
 #endif /* CONFIG_CPU_MONAHANS */
 
-			STIER = 0;
-			STFCR = 0;
+			writel(0, STIER);
+			writel(0, STFCR);
 
 			/* set baud rate */
-			STLCR = LCR_DLAB;
-			STDLL = quot & 0xff;
-			STDLH = quot >> 8;
-			STLCR = LCR_WLS0 | LCR_WLS1;
+			writel(LCR_DLAB, STLCR);
+			writel(quot & 0xff, STDLL);
+			writel(quot >> 8, STDLH);
+			writel(LCR_WLS0 | LCR_WLS1, STLCR);
 
-			STIER = IER_UUE;			/* Enable STUART */
+			writel(IER_UUE, STIER);	/* Enable STUART */
 			break;
 
 		default:
@@ -156,21 +157,21 @@ void pxa_putc_dev (unsigned int uart_index,const char c)
 	switch (uart_index) {
 		case FFUART_INDEX:
 		/* wait for room in the tx FIFO on FFUART */
-			while ((FFLSR & LSR_TEMT) == 0)
+			while ((readl(FFLSR) & LSR_TEMT) == 0)
 				WATCHDOG_RESET ();	/* Reset HW Watchdog, if needed */
-			FFTHR = c;
+			writel(c, FFTHR);
 			break;
 
 		case BTUART_INDEX:
-			while ((BTLSR & LSR_TEMT ) == 0 )
+			while ((readl(BTLSR) & LSR_TEMT) == 0)
 				WATCHDOG_RESET ();	/* Reset HW Watchdog, if needed */
-			BTTHR = c;
+			writel(c, BTTHR);
 			break;
 
 		case STUART_INDEX:
-			while ((STLSR & LSR_TEMT ) == 0 )
+			while ((readl(STLSR) & LSR_TEMT) == 0)
 				WATCHDOG_RESET ();	/* Reset HW Watchdog, if needed */
-			STTHR = c;
+			writel(c, STTHR);
 			break;
 	}
 
@@ -188,11 +189,11 @@ int pxa_tstc_dev (unsigned int uart_index)
 {
 	switch (uart_index) {
 		case FFUART_INDEX:
-			return FFLSR & LSR_DR;
+			return readl(FFLSR) & LSR_DR;
 		case BTUART_INDEX:
-			return BTLSR & LSR_DR;
+			return readl(BTLSR) & LSR_DR;
 		case STUART_INDEX:
-			return STLSR & LSR_DR;
+			return readl(STLSR) & LSR_DR;
 	}
 	return -1;
 }
@@ -206,18 +207,21 @@ int pxa_getc_dev (unsigned int uart_index)
 {
 	switch (uart_index) {
 		case FFUART_INDEX:
-			while (!(FFLSR & LSR_DR))
-			WATCHDOG_RESET ();	/* Reset HW Watchdog, if needed */
-			return (char) FFRBR & 0xff;
+			while (!(readl(FFLSR) & LSR_DR))
+				/* Reset HW Watchdog, if needed */
+				WATCHDOG_RESET();
+			return (char) readl(FFRBR) & 0xff;
 
 		case BTUART_INDEX:
-			while (!(BTLSR & LSR_DR))
-			WATCHDOG_RESET ();	/* Reset HW Watchdog, if needed */
-			return (char) BTRBR & 0xff;
+			while (!(readl(BTLSR) & LSR_DR))
+				/* Reset HW Watchdog, if needed */
+				WATCHDOG_RESET();
+			return (char) readl(BTRBR) & 0xff;
 		case STUART_INDEX:
-			while (!(STLSR & LSR_DR))
-			WATCHDOG_RESET ();	/* Reset HW Watchdog, if needed */
-			return (char) STRBR & 0xff;
+			while (!(readl(STLSR) & LSR_DR))
+				/* Reset HW Watchdog, if needed */
+				WATCHDOG_RESET();
+			return (char) readl(STRBR) & 0xff;
 	}
 	return -1;
 }
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index af8ee907e8..8d7b3804fa 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -117,6 +117,8 @@ int ehci_hcd_init(void)
 
 	mxc_set_usbcontrol(CONFIG_MXC_USB_PORT, CONFIG_MXC_USB_FLAGS);
 
+	udelay(10000);
+
 	return 0;
 }