* Patch by Marc Singer, 29 May 2003:

  Fixed rarp boot method for IA32 and other little-endian CPUs.

* Patch by Marc Singer, 28 May 2003:
  Added port I/O commands.

* Patch by Matthew McClintock, 28 May 2003
  - cpu/mpc824x/start.S: fix relocation code when booting from RAM
  - minor patches for utx8245

* Patch by Daniel Engström, 28 May 2003:
  x86 update

* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
  add nand flash support to SXNI855T configuration
  fix/extend nand flash support:
  - fix 'nand erase' command so does not erase bad blocks
  - fix 'nand write' command so does not write to bad blocks
  - fix nand_probe() so handles no flash detected properly
  - add doc/README.nand
  - add .jffs2 and .oob options to nand read/write
  - add 'nand bad' command to list bad blocks
  - add 'clean' option to 'nand erase' to write JFFS2 clean markers
  - make NAND read/write faster

* Patch by Rune Torgersen, 23 May 2003:
  Update for MPC8266ADS board

6 files changed, 1489 insertions, 7 deletions

diff --git a/drivers/Makefile b/drivers/Makefile
index c28ed9f00a..277d6f68c6 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -27,16 +27,23 @@ include $(TOPDIR)/config.mk
 
 LIB	= libdrivers.a
 
-OBJS	= 3c589.o 5701rls.o at91rm9200_ether.o \
-	  bcm570x.o bcm570x_autoneg.o \
-	  cfb_console.o cs8900.o ct69000.o dc2114x.o \
+OBJS	= 3c589.o 5701rls.o ali512x.o at91rm9200_ether.o \
+	  bcm570x.o bcm570x_autoneg.o cfb_console.o \
+	  cs8900.o ct69000.o dc2114x.o          \
 	  eepro100.o i8042.o i82365.o inca-ip_sw.o \
-	  lan91c96.o natsemi.o ns16550.o ns8382x.o ns87308.o \
+	  lan91c96.o             natsemi.o \
+	  ns16550.o ns8382x.o ns87308.o \
 	  pci.o pci_auto.o pci_indirect.o \
 	  pcnet.o plb2800_eth.o \
 	  s3c24x0_i2c.o sed13806.o serial.o \
-	  smc91111.o smiLynxEM.o sym53c8xx.o \
-	  tigon3.o w83c553f.o
+	  smc91111.o smiLynxEM.o              sym53c8xx.o \
+	  ti_pci1410a.o tigon3.o w83c553f.o
+
+## Disabled for now:
+##	  cs8900.o ct69000.o dc2114x.o ds1722.o \
+##	  lan91c96.o mw_eeprom.o natsemi.o \
+##	  smc91111.o smiLynxEM.o spi_eeprom.o sym53c8xx.o \
+##
 
 all:	$(LIB)
 
diff --git a/drivers/ali512x.c b/drivers/ali512x.c
new file mode 100644
index 0000000000..e52edd003d
--- /dev/null
+++ b/drivers/ali512x.c
@@ -0,0 +1,423 @@
+/*
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Based on sc520cdp.c from rolo 1.6:
+ *----------------------------------------------------------------------
+ * (C) Copyright 2000
+ * Sysgo Real-Time Solutions GmbH
+ * Klein-Winternheim, Germany
+ *----------------------------------------------------------------------
+ */
+
+#include <config.h>
+
+#ifdef CONFIG_ALI152X
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/ic/ali512x.h>
+
+
+/* ALI M5123 Logical device numbers:
+ * 0 FDC
+ * 1 unused?
+ * 2 unused?
+ * 3 lpt
+ * 4 UART1
+ * 5 UART2
+ * 6 RTC
+ * 7 mouse/kbd
+ * 8 CIO
+ */
+
+/*
+ ************************************************************
+ *  Some access primitives for the ALi chip:                *
+ ************************************************************
+ */
+
+static void ali_write(u8 index, u8 value)
+{	
+	/* write an arbirary register */
+	outb(index, ALI_INDEX);
+	outb(value, ALI_DATA);
+}
+
+#if 0
+static int ali_read(u8 index)
+{
+	outb(index, ALI_INDEX);
+	return inb(ALI_DATA);
+}
+#endif
+
+#define ALI_OPEN() \
+	outb(0x51, ALI_INDEX); \
+	outb(0x23, ALI_INDEX)	
+
+
+#define ALI_CLOSE() \
+	outb(0xbb, ALI_INDEX)
+
+/* Select a logical device */
+#define ALI_SELDEV(dev)	\
+	ali_write(0x07, dev)	
+
+
+void ali512x_init(void)
+{
+	ALI_OPEN();
+
+	ali_write(0x02, 0x01);	/* soft reset */
+	ali_write(0x03, 0x03);	/* disable access to CIOs */
+	ali_write(0x22, 0x00);	/* disable direct powerdown */
+	ali_write(0x23, 0x00);	/* disable auto powerdown */
+	ali_write(0x24, 0x00);	/* IR 8 is active hi, pin26 is PDIR */
+
+	ALI_CLOSE();
+}
+
+void ali512x_set_fdc(int enabled, u16 io, u8 irq, u8 dma_channel)
+{
+	ALI_OPEN();
+	ALI_SELDEV(0);
+	
+	ali_write(0x30, enabled?1:0);
+	if (enabled) {
+		ali_write(0x60, io >> 8);
+		ali_write(0x61, io & 0xff);
+		ali_write(0x70, irq);
+		ali_write(0x74, dma_channel);
+		
+		/* AT mode, no drive swap */
+		ali_write(0xf0, 0x08);
+		ali_write(0xf1, 0x00);
+		ali_write(0xf2, 0xff);
+		ali_write(0xf4, 0x00);
+	}
+	ALI_CLOSE();
+}
+
+
+void ali512x_set_pp(int enabled, u16 io, u8 irq, u8 dma_channel)
+{
+	ALI_OPEN();
+	ALI_SELDEV(3);
+	
+	ali_write(0x30, enabled?1:0);
+	if (enabled) {
+		ali_write(0x60, io >> 8);
+		ali_write(0x61, io & 0xff);
+		ali_write(0x70, irq);
+		ali_write(0x74, dma_channel);
+		
+		/* mode: EPP 1.9, ECP FIFO threshold = 7, IRQ active low */
+		ali_write(0xf0, 0xbc);
+		/* 12 MHz, Burst DMA in ECP */
+		ali_write(0xf1, 0x05);
+	}
+	ALI_CLOSE();
+
+}
+
+void ali512x_set_uart(int enabled, int index, u16 io, u8 irq)
+{
+	ALI_OPEN();
+	ALI_SELDEV(index?5:4);
+	
+	ali_write(0x30, enabled?1:0);
+	if (enabled) {
+		ali_write(0x60, io >> 8);
+		ali_write(0x61, io & 0xff);
+		ali_write(0x70, irq);
+		
+		ali_write(0xf0, 0x00);
+		ali_write(0xf1, 0x00);
+		
+		/* huh? write 0xf2 twice - a typo in rolo
+		 * or some secret ali errata? Who knows? 
+		 */
+		if (index) {
+			ali_write(0xf2, 0x00);
+		}
+		ali_write(0xf2, 0x0c);
+	}
+	ALI_CLOSE();
+
+}
+
+void ali512x_set_uart2_irda(int enabled)
+{
+	ALI_OPEN();
+	ALI_SELDEV(5);
+	
+	ali_write(0xf1, enabled?0x48:0x00); /* fullduplex IrDa */
+	ALI_CLOSE();
+
+}
+
+void ali512x_set_rtc(int enabled, u16 io, u8 irq)
+{
+	ALI_OPEN();
+	ALI_SELDEV(6);
+	
+	ali_write(0x30, enabled?1:0);
+	if (enabled) {
+		ali_write(0x60, io >> 8);
+		ali_write(0x61, io & 0xff);
+		ali_write(0x70, irq);
+
+		ali_write(0xf0, 0x00);
+	}
+	ALI_CLOSE();
+}
+
+void ali512x_set_kbc(int enabled, u8 kbc_irq, u8 mouse_irq)
+{
+	ALI_OPEN();
+	ALI_SELDEV(7);
+	
+	ali_write(0x30, enabled?1:0);
+	if (enabled) {
+		ali_write(0x70, kbc_irq);
+		ali_write(0x72, mouse_irq);		
+		
+		ali_write(0xf0, 0x00);
+	}
+	ALI_CLOSE();
+}
+
+
+/* Common I/O
+ * 
+ * (This descripotsion is base on several incompete sources
+ *  since I have not been able to obtain any datasheet for the device
+ *  there may be some mis-understandings burried in here. 
+ *  -- Daniel daniel@omicron.se)
+ * 
+ * There are 22 CIO pins numbered
+ * 10-17
+ * 20-25
+ * 30-37
+ * 
+ * 20-24 are dedicated CIO pins, the other 17 are muliplexed with
+ * other functions.
+ * 
+ *           Secondary 
+ * CIO Pin   Function    Decription
+ * =======================================================
+ * CIO10     IRQIN1      Interrupt input 1?
+ * CIO11     IRQIN2      Interrupt input 2?
+ * CIO12     IRRX        IrDa Receive
+ * CIO13     IRTX        IrDa Transmit
+ * CIO14     P21         KBC P21 fucntion
+ * CIO15     P20         KBC P21 fucntion
+ * CIO16     I2C_CLK     I2C Clock
+ * CIO17     I2C_DAT     I2C Data
+ * 
+ * CIO20     -
+ * CIO21     -
+ * CIO22     -
+ * CIO23     -
+ * CIO24     -
+ * CIO25     LOCK        Keylock
+ * 
+ * CIO30     KBC_CLK     Keybaord Clock
+ * CIO31     CS0J        General Chip Select decoder CS0J
+ * CIO32     CS1J        General Chip Select decoder CS1J
+ * CIO33     ALT_KCLK    Alternative Keyboard Clock
+ * CIO34     ALT_KDAT    Alternative Keyboard Data
+ * CIO35     ALT_MCLK    Alternative Mouse Clock
+ * CIO36     ALT_MDAT    Alternative Mouse Data
+ * CIO37     ALT_KBC     Alternative KBC select
+ *
+ * The CIO use an indirect address scheme. 
+ * 
+ * Reigster 3 in the SIO is used to select the index and data
+ * port addresses where the CIO I/O registers show up.
+ * The function selection registers are accessible under 
+ * function SIO 8. 
+ * 
+ * SIO reigster 3 (CIO Address Selection) bit definitions:
+ * bit 7   CIO index and data registers enabled
+ * bit 1-0 CIO indirect registers port address select
+ *     	 0  index = 0xE0 data = 0xE1
+ *       1  index = 0xE2 data = 0xE3
+ *       2  index = 0xE4 data = 0xE5
+ *       3  index = 0xEA data = 0xEB
+ * 
+ * There are three CIO I/O register accessed via CIO index port and CIO data port
+ * 0x01     CIO 10-17 data
+ * 0x02     CIO 20-25 data (bits 7-6 unused)
+ * 0x03     CIO 30-37 data
+ * 
+ * 
+ * The pin function is accessed through normal 
+ * SIO registers, each register have the same format:
+ * 
+ * Bit   Function                     Value
+ * 0     Input/output                 1=input 
+ * 1     Polarity of signal           1=inverted
+ * 2     Unused                       ??
+ * 3     Function (normal or special) 1=special
+ * 7-4   Unused
+ * 
+ * SIO REG
+ * 0xe0     CIO 10 Config
+ * 0xe1     CIO 11 Config
+ * 0xe2     CIO 12 Config
+ * 0xe3     CIO 13 Config
+ * 0xe4     CIO 14 Config
+ * 0xe5     CIO 15 Config
+ * 0xe6     CIO 16 Config
+ * 0xe7     CIO 16 Config
+ *
+ * 0xe8     CIO 20 Config
+ * 0xe9     CIO 21 Config
+ * 0xea     CIO 22 Config
+ * 0xeb     CIO 23 Config
+ * 0xec     CIO 24 Config
+ * 0xed     CIO 25 Config
+ *
+ * 0xf5     CIO 30 Config
+ * 0xf6     CIO 31 Config
+ * 0xf7     CIO 32 Config
+ * 0xf8     CIO 33 Config
+ * 0xf9     CIO 34 Config
+ * 0xfa     CIO 35 Config
+ * 0xfb     CIO 36 Config
+ * 0xfc     CIO 37 Config
+ * 
+ */
+
+#define ALI_CIO_PORT_SEL 0x83
+#define ALI_CIO_INDEX    0xea
+#define ALI_CIO_DATA     0xeb
+
+void ali512x_set_cio(int enabled)
+{
+	int i;
+	
+	ALI_OPEN();
+	
+	if (enabled) {
+		ali_write(0x3, ALI_CIO_PORT_SEL);    /* Enable CIO data register */
+	} else {
+		ali_write(0x3, ALI_CIO_PORT_SEL & ~0x80);
+	}
+	
+	ALI_SELDEV(8);
+	
+	ali_write(0x30, enabled?1:0);
+	
+	/* set all pins to input to start with */
+	for (i=0xe0;i<0xee;i++) {
+		ali_write(i, 1);
+	}
+	
+	for (i=0xf5;i<0xfe;i++) {
+		ali_write(i, 1);
+	}
+	
+	ALI_CLOSE();
+}
+
+
+void ali512x_cio_function(int pin, int special, int inv, int input)
+{
+	u8 data;
+	u8 addr;
+	
+	/* valid pins are 10-17, 20-25 and 30-37 */
+	if (pin >= 10 && pin <= 17) { 
+		addr = 0xe0+(pin&7);
+	} else if (pin >= 20 && pin <= 25) {
+		addr = 0xe8+(pin&7);
+	} else if (pin >= 30 && pin <= 37) { 
+		addr = 0xf5+(pin&7);
+	} else {
+		return;
+	}
+	
+	ALI_OPEN();
+
+	ALI_SELDEV(8);
+	
+	
+	data=0xf4;
+	if (special) {
+		data |= 0x08;
+	} else {
+		if (inv) {
+			data |= 0x02;
+		}
+		if (input) {
+			data |= 0x01;
+		}
+	}
+	
+	ali_write(addr, data);
+	
+	ALI_CLOSE();
+}
+
+void ali512x_cio_out(int pin, int value) 
+{
+	u8 reg;
+	u8 data;
+	u8 bit;
+	
+	reg = pin/10;
+	bit = 1 << (pin%10);
+	
+		
+	outb(reg, ALI_CIO_INDEX);     /* select I/O register */
+	data = inb(ALI_CIO_DATA);
+	if (value) {
+		data |= bit;
+	} else {
+		data &= ~bit;
+	}
+	outb(data, ALI_CIO_DATA);
+}
+
+int ali512x_cio_in(int pin)
+{
+	u8 reg;
+	u8 data;
+	u8 bit;
+			
+	/* valid pins are 10-17, 20-25 and 30-37 */
+	reg = pin/10;
+	bit = 1 << (pin%10);
+	
+	
+	outb(reg, ALI_CIO_INDEX);     /* select I/O register */
+	data = inb(ALI_CIO_DATA);
+	
+	return data & bit; 
+}
+
+ 
+#endif
diff --git a/drivers/ds1722.c b/drivers/ds1722.c
new file mode 100644
index 0000000000..34eb80ca23
--- /dev/null
+++ b/drivers/ds1722.c
@@ -0,0 +1,142 @@
+
+#include <common.h>
+
+#include <ssi.h>
+
+#ifdef CONFIG_DS1722
+
+static void ds1722_select(int dev)
+{
+	ssi_set_interface(4096, 0, 0, 0);
+	ssi_chip_select(0);
+	udelay(1);
+	ssi_chip_select(dev);
+	udelay(1);
+}
+
+
+u8 ds1722_read(int dev, int addr)
+{
+	u8 res;
+	
+	ds1722_select(dev);
+	
+	ssi_tx_byte(addr);	
+	res = ssi_rx_byte();   	
+	
+	ssi_chip_select(0);
+	
+	return res;
+}
+
+void ds1722_write(int dev, int addr, u8 data)
+{
+	ds1722_select(dev);
+	
+	ssi_tx_byte(0x80|addr);	
+	ssi_tx_byte(data);   	
+	
+	ssi_chip_select(0);
+}
+
+
+u16 ds1722_temp(int dev, int resolution)
+{
+	static int useconds[] = {
+		75000, 150000, 300000, 600000, 1200000 
+	};
+	char temp;
+	u16 res;
+	
+	
+	/* set up the desired resulotion ... */
+	ds1722_write(dev, 0, 0xe0 | (resolution << 1));
+			
+	/* wait while the chip measures the tremperature */
+	udelay(useconds[resolution]); 	
+	
+	res = (temp = ds1722_read(dev, 2)) << 8;
+	
+	if (temp < 0) { 
+		temp = (16 - (ds1722_read(dev, 1) >> 4)) & 0x0f;
+	} else {
+		temp = (ds1722_read(dev, 1) >> 4);
+	}
+	
+	switch (temp) {
+	case 0:
+		/* .0000 */
+		break;
+	case 1:
+		/* .0625 */
+		res |=1;
+		break;
+	case 2:
+		/* .1250 */
+		res |=1;
+		break;
+	case 3:
+		/* .1875 */
+		res |=2;
+		break;
+	case 4:
+		/* .2500 */
+		res |=3;
+		break;
+	case 5:
+		/* .3125 */
+		res |=3;
+		break;
+	case 6:
+		/* .3750 */
+		res |=4;
+		break;
+	case 7:
+		/* .4375 */
+		res |=4;
+		break;
+	case 8:
+		/* .5000 */
+		res |=5;
+		break;
+	case 9:
+		/* .5625 */
+		res |=6;
+		break;
+	case 10:
+		/* .6250 */
+		res |=6;
+		break;
+	case 11:
+		/* .6875 */
+		res |=7;
+		break;
+	case 12:
+		/* .7500 */
+		res |=8;
+		break;
+	case 13:
+		/* .8125 */
+		res |=8;
+		break;
+	case 14:
+		/* .8750 */
+		res |=9;
+		break;
+	case 15:
+		/* .9375 */
+		res |=9;
+		break;
+	}
+	return res;
+			
+}
+
+int ds1722_probe(int dev)
+{
+	u16 temp = ds1722_temp(dev, DS1722_RESOLUTION_12BIT);
+	printf("%d.%d deg C\n\n", (char)(temp >> 8), temp & 0xff);
+	return 0;
+}
+
+#endif
diff --git a/drivers/eepro100.c b/drivers/eepro100.c
index c8d07de8b6..a0bb76da4d 100644
--- a/drivers/eepro100.c
+++ b/drivers/eepro100.c
@@ -331,8 +331,8 @@ int eepro100_initialize (bd_t * bis)
 		dev = (struct eth_device *) malloc (sizeof *dev);
 
 		sprintf (dev->name, "i82559#%d", card_number);
+		dev->priv = (void *) devno; /* this have to come before bus_to_phys() */
 		dev->iobase = bus_to_phys (iobase);
-		dev->priv = (void *) devno;
 		dev->init = eepro100_init;
 		dev->halt = eepro100_halt;
 		dev->send = eepro100_send;
diff --git a/drivers/mw_eeprom.c b/drivers/mw_eeprom.c
new file mode 100644
index 0000000000..30a51fa051
--- /dev/null
+++ b/drivers/mw_eeprom.c
@@ -0,0 +1,242 @@
+/* Three-wire (MicroWire) serial eeprom driver (for 93C46 and compatibles) */
+
+#include <common.h>
+#include <ssi.h>
+
+
+#ifdef CONFIG_MW_EEPROM
+
+/*
+ * Serial EEPROM opcodes, including start bit
+ */
+#define EEP_OPC_ERASE	0x7  /* 3-bit opcode */
+#define EEP_OPC_WRITE	0x5  /* 3-bit opcode */
+#define EEP_OPC_READ	        0x6  /* 3-bit opcode */
+
+#define EEP_OPC_ERASE_ALL	0x12 /* 5-bit opcode */
+#define EEP_OPC_ERASE_EN	0x13 /* 5-bit opcode */
+#define EEP_OPC_WRITE_ALL	0x11 /* 5-bit opcode */
+#define EEP_OPC_ERASE_DIS	0x10 /* 5-bit opcode */
+
+static int addrlen;
+
+static void mw_eeprom_select(int dev)
+{
+	ssi_set_interface(2048, 0, 0, 0);
+	ssi_chip_select(0);
+	udelay(1);
+	ssi_chip_select(dev);
+	udelay(1);
+}
+
+static int mw_eeprom_size(int dev)
+{
+	int x;
+	u16 res;
+		
+	mw_eeprom_select(dev);
+	ssi_tx_byte(EEP_OPC_READ);
+	
+	res = ssi_txrx_byte(0) << 8;
+	res |= ssi_rx_byte();
+	for (x = 0; x < 16; x++) {
+		if (! (res & 0x8000)) {
+			break;
+		}
+		res <<= 1;
+	}
+	ssi_chip_select(0);
+	
+	return x;
+}
+
+int mw_eeprom_erase_enable(int dev)
+{
+	mw_eeprom_select(dev);
+	ssi_tx_byte(EEP_OPC_ERASE_EN);
+	ssi_tx_byte(0);
+	udelay(1);
+	ssi_chip_select(0);
+		
+	return 0;
+}
+
+int mw_eeprom_erase_disable(int dev)
+{	
+	mw_eeprom_select(dev);
+	ssi_tx_byte(EEP_OPC_ERASE_DIS);
+	ssi_tx_byte(0);
+	udelay(1);
+	ssi_chip_select(0);
+		
+	return 0;
+}
+
+
+u32 mw_eeprom_read_word(int dev, int addr)
+{
+	u16 rcv;
+	u16 res;
+	int bits;
+	
+	mw_eeprom_select(dev);
+	ssi_tx_byte((EEP_OPC_READ << 5) | ((addr >> (addrlen - 5)) & 0x1f));
+	rcv = ssi_txrx_byte(addr << (13 - addrlen));
+	res = rcv << (16 - addrlen);
+	bits = 4 + addrlen;
+	
+	while (bits>0) {
+		rcv = ssi_rx_byte();
+		if (bits > 7) {
+			res |= rcv << (bits - 8);
+		} else {
+			res |= rcv >> (8 - bits);
+		}
+		bits -= 8;
+	}
+	
+	ssi_chip_select(0);
+	
+	return res;
+}
+
+int mw_eeprom_write_word(int dev, int addr, u16 data)
+{
+	u8 byte1=0;
+	u8 byte2=0;
+	
+	mw_eeprom_erase_enable(dev);
+	mw_eeprom_select(dev);
+	
+	switch (addrlen) {
+	 case 6:
+		byte1 = EEP_OPC_WRITE >> 2;
+		byte2 = (EEP_OPC_WRITE << 6)&0xc0;
+		byte2 |= addr;
+		break;
+	 case 7:
+		byte1 = EEP_OPC_WRITE >> 1;
+		byte2 = (EEP_OPC_WRITE << 7)&0x80;
+		byte2 |= addr;
+		break;
+	 case 8:
+		byte1 = EEP_OPC_WRITE;
+		byte2 = addr;
+		break;
+	 case 9:
+		byte1 = EEP_OPC_WRITE << 1;
+		byte1 |= addr >> 8;
+		byte2 = addr & 0xff;
+		break;
+	 case 10:
+		byte1 = EEP_OPC_WRITE << 2;
+		byte1 |= addr >> 8;
+		byte2 = addr & 0xff;
+		break;
+	 default:
+		printf("Unsupported number of address bits: %d\n", addrlen);
+		return -1;
+		
+	}
+	
+	ssi_tx_byte(byte1);
+	ssi_tx_byte(byte2);
+	ssi_tx_byte(data >> 8);	
+	ssi_tx_byte(data & 0xff);
+	ssi_chip_select(0);	
+	udelay(10000); /* Worst case */
+	mw_eeprom_erase_disable(dev);
+
+	return 0;
+}
+
+
+int mw_eeprom_write(int dev, int addr, u8 *buffer, int len)
+{
+	int done;
+	
+	done = 0;
+	if (addr & 1) {
+		u16 temp = mw_eeprom_read_word(dev, addr >> 1);
+		temp &= 0xff00;
+		temp |= buffer[0];
+		
+		mw_eeprom_write_word(dev, addr >> 1, temp);
+		len--;
+		addr++;
+		buffer++;
+		done++;
+	}
+	
+	while (len <= 2) {
+		mw_eeprom_write_word(dev, addr >> 1, *(u16*)buffer);
+		len-=2;
+		addr+=2;
+		buffer+=2;
+		done+=2;
+	}
+
+	if (len) {
+		u16 temp = mw_eeprom_read_word(dev, addr >> 1);
+		temp &= 0x00ff;
+		temp |= buffer[0] << 8;
+		
+		mw_eeprom_write_word(dev, addr >> 1, temp);
+		len--;
+		addr++;
+		buffer++;
+		done++;
+	}
+
+	return done;
+}
+
+
+
+int mw_eeprom_read(int dev, int addr, u8 *buffer, int len)
+{
+	int done;
+	
+	done = 0;
+	if (addr & 1) {
+		u16 temp = mw_eeprom_read_word(dev, addr >> 1);
+		buffer[0]= temp & 0xff;
+		
+		len--;
+		addr++;
+		buffer++;
+		done++;
+	}
+	
+	while (len <= 2) {
+		*(u16*)buffer = mw_eeprom_read_word(dev, addr >> 1);
+		len-=2;
+		addr+=2;
+		buffer+=2;
+		done+=2;
+	}
+
+	if (len) {
+		u16 temp = mw_eeprom_read_word(dev, addr >> 1);
+		buffer[0] = temp >> 8;
+		
+		len--;
+		addr++;
+		buffer++;
+		done++;
+	}
+
+	return done;
+}
+
+int mw_eeprom_probe(int dev)
+{
+	addrlen = mw_eeprom_size(dev);
+	
+	if (addrlen < 6 || addrlen > 10) {
+		return -1;
+	}
+	return 0;
+}
+
+#endif
diff --git a/drivers/ti_pci1410a.c b/drivers/ti_pci1410a.c
new file mode 100644
index 0000000000..a2b1a17f20
--- /dev/null
+++ b/drivers/ti_pci1410a.c
@@ -0,0 +1,668 @@
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ ********************************************************************
+ *
+ * Lots of code copied from:
+ *
+ * m8xx_pcmcia.c - Linux PCMCIA socket driver for the mpc8xx series.
+ * (C) 1999-2000 Magnus Damm <damm@bitsmart.com>
+ *
+ * "The ExCA standard specifies that socket controllers should provide
+ * two IO and five memory windows per socket, which can be independently
+ * configured and positioned in the host address space and mapped to
+ * arbitrary segments of card address space. " - David A Hinds. 1999
+ *
+ * This controller does _not_ meet the ExCA standard.
+ *
+ * m8xx pcmcia controller brief info:
+ * + 8 windows (attrib, mem, i/o)
+ * + up to two slots (SLOT_A and SLOT_B)
+ * + inputpins, outputpins, event and mask registers.
+ * - no offset register. sigh.
+ *
+ * Because of the lacking offset register we must map the whole card.
+ * We assign each memory window PCMCIA_MEM_WIN_SIZE address space.
+ * Make sure there is (PCMCIA_MEM_WIN_SIZE * PCMCIA_MEM_WIN_NO
+ * * PCMCIA_SOCKETS_NO) bytes at PCMCIA_MEM_WIN_BASE.
+ * The i/o windows are dynamically allocated at PCMCIA_IO_WIN_BASE.
+ * They are maximum 64KByte each...
+ */
+
+
+#undef DEBUG		/**/
+
+/*
+ * PCMCIA support
+ */
+#include <common.h>
+#include <command.h>
+#include <config.h>
+#include <pci.h>
+#include <asm/io.h>
+
+#include <pcmcia.h>
+#include <cmd_pcmcia.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) && defined(CONFIG_IDE_TI_CARDBUS)
+
+int pcmcia_on(int ide_base_bus);
+
+static int  pcmcia_off(void);
+static int  hardware_disable(int slot);
+static int  hardware_enable(int slot);
+static int  voltage_set(int slot, int vcc, int vpp);
+static void print_funcid(int func);
+static void print_fixed(volatile uchar *p);
+static int  identify(volatile uchar *p);
+static int  check_ide_device(int slot, int ide_base_bus);
+
+
+/* ------------------------------------------------------------------------- */
+
+
+const char *indent = "\t   ";
+
+/* ------------------------------------------------------------------------- */
+
+
+int do_pinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+#ifndef CFG_FISRT_PCMCIA_BUS
+# define CFG_FISRT_PCMCIA_BUS 0
+#endif
+
+	int rcode = 0;
+	
+	if (argc != 2) {
+		printf ("Usage: pinit {on | off}\n");
+		return 1;
+	}
+	if (strcmp(argv[1],"on") == 0) {
+		rcode = pcmcia_on(CFG_FISRT_PCMCIA_BUS);
+	} else if (strcmp(argv[1],"off") == 0) {
+		rcode = pcmcia_off();
+	} else {
+		printf ("Usage: pinit {on | off}\n");
+		return 1;
+	}
+	
+	return rcode;
+}
+
+/* ------------------------------------------------------------------------- */
+
+
+static struct pci_device_id supported[] = {
+	{ PCI_VENDOR_ID_TI, 0xac50 }, /* Ti PCI1410A */
+	{ PCI_VENDOR_ID_TI, 0xac56 }, /* Ti PCI1510 */
+	{ }
+};
+
+static pci_dev_t devbusfn;
+static u32 socket_base;
+static u32 pcmcia_cis_ptr;
+
+int pcmcia_on(int ide_base_bus)
+{	
+	u16 dev_id;
+	u32 socket_status;
+	int slot = 0;
+	int cis_len;
+	u16 io_base;
+	u16 io_len;
+	
+	/*
+	 * Find the CardBus PCI device(s).
+	 */
+	if ((devbusfn = pci_find_devices(supported, 0)) < 0) {
+		printf("Ti CardBus: not found\n");
+		return 1;
+	}
+	
+	pci_read_config_word(devbusfn, PCI_DEVICE_ID, &dev_id);
+	
+	if (dev_id == 0xac56) {
+		debug("Enable PCMCIA Ti PCI1510\n");
+	} else {
+		debug("Enable PCMCIA Ti PCI1410A\n");
+	}
+
+	pcmcia_cis_ptr = CFG_PCMCIA_CIS_WIN;
+	cis_len = CFG_PCMCIA_CIS_WIN_SIZE;
+
+	io_base = CFG_PCMCIA_IO_WIN;
+	io_len = CFG_PCMCIA_IO_WIN_SIZE;	
+
+	/*
+	 * Setup the PCI device.
+	 */
+	pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &socket_base);
+	socket_base &= ~0xf;
+
+	socket_status = readl(socket_base+8);
+	if ((socket_status & 6) == 0) {
+		printf("Card Present: ");
+		
+		switch (socket_status & 0x3c00) {
+			
+		case 0x400:
+			printf("5V ");
+			break;
+		case 0x800:
+			printf("3.3V ");
+			break;
+		case 0xc00:
+			printf("3.3/5V ");
+			break;
+		default:
+			printf("unsupported Vcc ");
+			break;
+		}
+		switch (socket_status & 0x30) {
+		case 0x10:
+			printf("16bit PC-Card\n");
+			break;
+		case 0x20:
+			printf("32bit CardBus Card\n");
+			break;
+		default:
+			printf("8bit PC-Card\n");		
+			break;
+		}	
+	}
+	
+	
+	writeb(0x41, socket_base + 0x806); /* Enable I/O window 0 and memory window 0 */
+	writeb(0x0e, socket_base + 0x807); /* Reset I/O window options */
+
+	/* Careful: the linux yenta driver do not seem to reset the offset
+	 * in the i/o windows, so leaving them non-zero is a problem */
+	
+	writeb(io_base & 0xff, socket_base + 0x808); /* I/O window 0 base address */
+	writeb(io_base>>8, socket_base + 0x809);
+	writeb((io_base + io_len - 1) & 0xff, socket_base + 0x80a); /* I/O window 0 end address */
+	writeb((io_base + io_len - 1)>>8, socket_base + 0x80b);
+	writeb(0x00, socket_base + 0x836);      /* I/O window 0 offset address 0x000 */				     
+	writeb(0x00, socket_base + 0x837);
+
+	
+	writeb((pcmcia_cis_ptr&0x000ff000) >> 12, 
+	       socket_base + 0x810); /* Memory window 0 start address bits 19-12 */
+	writeb((pcmcia_cis_ptr&0x00f00000) >> 20, 
+	       socket_base + 0x811);  /* Memory window 0 start address bits 23-20 */
+	writeb(((pcmcia_cis_ptr+cis_len-1) & 0x000ff000) >> 12, 
+		socket_base + 0x812); /* Memory window 0 end address bits 19-12*/
+	writeb(((pcmcia_cis_ptr+cis_len-1) & 0x00f00000) >> 20, 
+		socket_base + 0x813); /* Memory window 0 end address bits 23-20*/
+	writeb(0x00, socket_base + 0x814); /* Memory window 0 offset bits 19-12 */ 
+	writeb(0x40, socket_base + 0x815); /* Memory window 0 offset bits 23-20 and 
+					    * options (read/write, attribute access) */
+	writeb(0x00, socket_base + 0x816); /* ExCA card-detect and general control  */
+	writeb(0x00, socket_base + 0x81e); /* ExCA global control (interrupt modes) */
+	
+	writeb((pcmcia_cis_ptr & 0xff000000) >> 24, 
+	       socket_base + 0x840); /* Memory window address bits 31-24 */
+
+		
+	/* turn off voltage */
+	if (voltage_set(slot, 0, 0)) {
+		return 1;
+	}
+
+	/* Enable external hardware */
+	if (hardware_enable(slot)) {
+		return 1;
+	}
+	
+	if (check_ide_device(slot, ide_base_bus)) {
+		return 1;
+	}
+	
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+
+static int pcmcia_off (void)
+{
+	int slot = 0;
+	
+	writeb(0x00, socket_base + 0x806); /* disable all I/O and memory windows */
+	
+	writeb(0x00, socket_base + 0x808); /* I/O window 0 base address */
+	writeb(0x00, socket_base + 0x809);
+	writeb(0x00, socket_base + 0x80a); /* I/O window 0 end address */
+	writeb(0x00, socket_base + 0x80b);
+	writeb(0x00, socket_base + 0x836); /* I/O window 0 offset address  */				     
+	writeb(0x00, socket_base + 0x837);
+	
+	writeb(0x00, socket_base + 0x80c); /* I/O window 1 base address  */
+	writeb(0x00, socket_base + 0x80d);
+	writeb(0x00, socket_base + 0x80e); /* I/O window 1 end address  */
+	writeb(0x00, socket_base + 0x80f);
+	writeb(0x00, socket_base + 0x838); /* I/O window 1 offset address  */				     
+	writeb(0x00, socket_base + 0x839);
+	
+	writeb(0x00, socket_base + 0x810); /* Memory window 0 start address */
+	writeb(0x00, socket_base + 0x811);
+	writeb(0x00, socket_base + 0x812); /* Memory window 0 end address  */
+	writeb(0x00, socket_base + 0x813);
+	writeb(0x00, socket_base + 0x814); /* Memory window 0 offset */
+	writeb(0x00, socket_base + 0x815);
+	
+	writeb(0xc0, socket_base + 0x840); /* Memory window 0 page address */
+
+
+	/* turn off voltage */
+	voltage_set(slot, 0, 0);
+
+	/* disable external hardware */
+	printf ("Shutdown and Poweroff Ti PCI1410A\n");
+	hardware_disable(slot);
+	
+	return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+
+#define	MAX_TUPEL_SZ	512
+#define MAX_FEATURES	4
+int ide_devices_found;
+static int check_ide_device(int slot, int ide_base_bus)
+{
+	volatile uchar *ident = NULL;
+	volatile uchar *feature_p[MAX_FEATURES];
+	volatile uchar *p, *start;
+	int n_features = 0;
+	uchar func_id = ~0;
+	uchar code, len;
+	ushort config_base = 0;
+	int found = 0;
+	int i;
+	u32 socket_status;
+
+	debug ("PCMCIA MEM: %08X\n", pcmcia_cis_ptr);
+	
+	socket_status = readl(socket_base+8);
+	
+	if ((socket_status & 6) != 0 || (socket_status & 0x20) != 0) {
+		printf("no card or CardBus card\n");
+		return 1;
+	}
+	
+	start = p = (volatile uchar *) pcmcia_cis_ptr;
+
+	while ((p - start) < MAX_TUPEL_SZ) {
+
+		code = *p; p += 2;
+
+		if (code == 0xFF) { /* End of chain */
+			break;
+		}
+
+		len = *p; p += 2;
+#if defined(DEBUG) && (DEBUG > 1)
+		{ 
+			volatile uchar *q = p;
+			printf ("\nTuple code %02x  length %d\n\tData:",
+				code, len);
+
+			for (i = 0; i < len; ++i) {
+				printf (" %02x", *q);
+				q+= 2;
+			}
+		}
+#endif	/* DEBUG */
+		switch (code) {
+		case CISTPL_VERS_1:
+			ident = p + 4;
+			break;
+		case CISTPL_FUNCID:
+			/* Fix for broken SanDisk which may have 0x80 bit set */
+			func_id = *p & 0x7F;
+			break;
+		case CISTPL_FUNCE:
+			if (n_features < MAX_FEATURES)
+				feature_p[n_features++] = p;
+			break;
+		case CISTPL_CONFIG:
+			config_base = (*(p+6) << 8) + (*(p+4));
+			debug ("\n## Config_base = %04x ###\n", config_base);
+		default:
+			break;
+		}
+		p += 2 * len;
+	}
+
+	found = identify(ident);
+
+	if (func_id != ((uchar)~0)) {
+		print_funcid (func_id);
+
+		if (func_id == CISTPL_FUNCID_FIXED)
+			found = 1;
+		else
+			return 1;	/* no disk drive */
+	}
+
+	for (i=0; i<n_features; ++i) {
+		print_fixed(feature_p[i]);
+	}
+
+	if (!found) {
+		printf("unknown card type\n");
+		return 1;
+	}
+	
+	/* select config index 1 */
+	writeb(1, pcmcia_cis_ptr + config_base);	
+
+#if 0
+	printf("Confiuration Option Register: %02x\n", readb(pcmcia_cis_ptr + config_base));
+	printf("Card Confiuration and Status Register: %02x\n", readb(pcmcia_cis_ptr + config_base + 2));
+	printf("Pin Replacement Register Register: %02x\n", readb(pcmcia_cis_ptr + config_base + 4));
+	printf("Socket and Copy Register: %02x\n", readb(pcmcia_cis_ptr + config_base + 6));
+#endif	
+	ide_devices_found |= (1 << (slot+ide_base_bus));
+	
+	return 0;
+}
+
+
+
+static int voltage_set(int slot, int vcc, int vpp)
+{
+	u32 socket_control;
+	int reg=0;
+	
+	switch (slot) {
+	case 0:
+		reg = socket_base + 0x10;
+		break;
+	default:
+		return 1;
+	}
+	
+	socket_control = 0;
+	
+	
+	switch (vcc) {
+	case 50:
+		socket_control |= 0x20;
+		break;
+	case 33:
+		socket_control |= 0x30;
+		break;
+	case 0:
+	default:
+	}
+	
+	switch (vpp) {
+	case 120:
+		socket_control |= 0x1;
+		break;
+	case 50:
+		socket_control |= 0x2;
+		break;
+	case 33:
+		socket_control |= 0x3;
+		break;
+	case 0:
+	default:
+	}
+
+	writel(socket_control, reg);
+	
+	debug ("voltage_set: Ti PCI1410A Slot %d, Vcc=%d.%d, Vpp=%d.%d\n",
+		slot, vcc/10, vcc%10, vpp/10, vpp%10);
+	
+	udelay(500);
+	return 0;
+}
+
+	
+static int hardware_enable(int slot)
+{
+	u32 socket_status;
+	u16 brg_ctrl;
+	int is_82365sl;
+	
+	socket_status = readl(socket_base+8);
+	
+	if ((socket_status & 6) == 0) {
+		
+		switch (socket_status & 0x3c00) {
+			
+		case 0x400:
+			printf("5V ");
+			voltage_set(slot, 50, 0);
+			break;
+		case 0x800:
+			voltage_set(slot, 33, 0);
+			break;
+		case 0xc00:
+			voltage_set(slot, 33, 0);
+			break;
+		default:
+			voltage_set(slot, 0, 0);
+			break;
+		}
+	} else {
+		voltage_set(slot, 0, 0);
+	}
+	
+	pci_read_config_word(devbusfn, PCI_BRIDGE_CONTROL, &brg_ctrl);
+	brg_ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
+	pci_write_config_word(devbusfn, PCI_BRIDGE_CONTROL, brg_ctrl);
+	is_82365sl = ((readb(socket_base+0x800) & 0x0f) == 2); 
+	writeb(is_82365sl?0x90:0x98, socket_base+0x802);
+	writeb(0x67, socket_base+0x803);
+	udelay(100000);
+#if 0	
+	printf("ExCA Id %02x, Card Status %02x, Power config %02x, Interrupt Config %02x, bridge control %04x %d\n", 
+	       readb(socket_base+0x800), readb(socket_base+0x801),
+	       readb(socket_base+0x802), readb(socket_base+0x803), brg_ctrl, is_82365sl);
+#endif	
+	
+	return ((readb(socket_base+0x801)&0x6c)==0x6c)?0:1;
+}
+
+
+
+static int hardware_disable(int slot)
+{
+	voltage_set(slot, 0, 0);
+	return 0;
+}
+
+static void print_funcid(int func)
+{
+	puts(indent);
+	switch (func) {
+	case CISTPL_FUNCID_MULTI:
+		puts(" Multi-Function");
+		break;
+	case CISTPL_FUNCID_MEMORY:
+		puts(" Memory");
+		break;
+	case CISTPL_FUNCID_SERIAL:
+		puts(" Serial Port");
+		break;
+	case CISTPL_FUNCID_PARALLEL:
+		puts(" Parallel Port");
+		break;
+	case CISTPL_FUNCID_FIXED:
+		puts(" Fixed Disk");
+		break;
+	case CISTPL_FUNCID_VIDEO:
+		puts(" Video Adapter");
+		break;
+	case CISTPL_FUNCID_NETWORK:
+		puts(" Network Adapter");
+		break;
+	case CISTPL_FUNCID_AIMS:
+		puts(" AIMS Card");
+		break;
+	case CISTPL_FUNCID_SCSI:
+		puts(" SCSI Adapter");
+		break;
+	default:
+		puts(" Unknown");
+		break;
+	}
+	puts(" Card\n");
+}
+
+/* ------------------------------------------------------------------------- */
+
+static void print_fixed(volatile uchar *p)
+{
+	if (p == NULL)
+		return;
+
+	puts(indent);
+	
+	switch (*p) {
+	case CISTPL_FUNCE_IDE_IFACE:
+		{   uchar iface = *(p+2);
+			
+			puts ((iface == CISTPL_IDE_INTERFACE) ? " IDE" : " unknown");
+			puts (" interface ");
+			break;
+		}
+	case CISTPL_FUNCE_IDE_MASTER:
+	case CISTPL_FUNCE_IDE_SLAVE:
+		{
+			uchar f1 = *(p+2);
+			uchar f2 = *(p+4);
+			
+			puts((f1 & CISTPL_IDE_SILICON) ? " [silicon]" : " [rotating]");
+			
+			if (f1 & CISTPL_IDE_UNIQUE) {
+				puts(" [unique]");
+			}
+			
+			puts((f1 & CISTPL_IDE_DUAL) ? " [dual]" : " [single]");
+			
+			if (f2 & CISTPL_IDE_HAS_SLEEP) {
+				puts(" [sleep]");
+			}
+			
+			if (f2 & CISTPL_IDE_HAS_STANDBY) {
+				puts(" [standby]");
+			}
+			
+			if (f2 & CISTPL_IDE_HAS_IDLE) {
+				puts(" [idle]");
+			}
+			
+			if (f2 & CISTPL_IDE_LOW_POWER) {
+				puts(" [low power]");
+			}
+			
+			if (f2 & CISTPL_IDE_REG_INHIBIT) {
+				puts(" [reg inhibit]");
+			}
+			
+			if (f2 & CISTPL_IDE_HAS_INDEX) {
+				puts(" [index]");
+			}
+			
+			if (f2 & CISTPL_IDE_IOIS16) {
+				puts(" [IOis16]");
+			}
+			
+			break;
+		}
+	}
+	putc('\n');
+}
+
+/* ------------------------------------------------------------------------- */
+
+#define MAX_IDENT_CHARS		64
+#define	MAX_IDENT_FIELDS	4
+
+static uchar *known_cards[] = {
+	"ARGOSY PnPIDE D5",
+	NULL
+};
+
+static int identify(volatile uchar *p)
+{
+	uchar id_str[MAX_IDENT_CHARS];
+	uchar data;
+	uchar *t;
+	uchar **card;
+	int i, done;
+
+	if (p == NULL)
+		return (0);	/* Don't know */
+	
+	t = id_str;
+	done =0;
+	
+	for (i=0; i<=4 && !done; ++i, p+=2) {
+		while ((data = *p) != '\0') {
+			if (data == 0xFF) {
+				done = 1;
+				break;
+			}
+			*t++ = data;
+			if (t == &id_str[MAX_IDENT_CHARS-1]) {
+				done = 1;
+				break;
+			}
+			p += 2;
+		}
+		if (!done)
+			*t++ = ' ';
+	}
+	*t = '\0';
+	while (--t > id_str) {
+		if (*t == ' ') {
+			*t = '\0';
+		} else {
+			break;
+		}
+	}
+	puts(id_str);
+	putc('\n');
+
+	for (card=known_cards; *card; ++card) {
+		debug ("## Compare against \"%s\"\n", *card);
+		if (strcmp(*card, id_str) == 0) {	/* found! */
+			debug ("## CARD FOUND ##\n");
+			return 1;
+		}
+	}
+	
+	return 0;	/* don't know */
+}
+
+#endif /* CONFIG_IDE_TI_CARDBUS */