diff options
| author | Vitaly Andrianov <vitalya@ti.com> | 2015-09-19 16:26:50 +0530 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2015-10-22 14:22:23 -0400 |
| commit | 4657a2d44ed06272c1fb1d6f5b842e93ceddbbb6 (patch) | |
| tree | 9246611d2d9e563f925208f7249069e8a564a6e3 /drivers | |
| parent | bc3003b99928c8976961a8d9bc3a899a7eb2bab4 (diff) | |
| download | talos-obmc-uboot-4657a2d44ed06272c1fb1d6f5b842e93ceddbbb6.tar.gz talos-obmc-uboot-4657a2d44ed06272c1fb1d6f5b842e93ceddbbb6.zip | |
driver: net: keystone_net: add support for rgmii phy
In K2G, Ethernet doesn't support SGMII instead it support RGMII,
adding support to the driver to connect to RGMII phy.
Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/keystone_net.c | 44 |
1 files changed, 43 insertions, 1 deletions
diff --git a/drivers/net/keystone_net.c b/drivers/net/keystone_net.c index 2e64e7ca4a..897d867cdd 100644 --- a/drivers/net/keystone_net.c +++ b/drivers/net/keystone_net.c @@ -42,7 +42,9 @@ struct rx_buff_desc net_rx_buffs = { .rx_flow = 22, }; +#ifndef CONFIG_SOC_K2G static void keystone2_net_serdes_setup(void); +#endif int keystone2_eth_read_mac_addr(struct eth_device *dev) { @@ -171,6 +173,37 @@ int keystone_sgmii_link_status(int port) (status & SGMII_REG_STATUS_LINK); } +#ifdef CONFIG_SOC_K2G +int keystone_rgmii_config(struct phy_device *phy_dev) +{ + unsigned int i, status; + + i = 0; + do { + if (i > SGMII_ANEG_TIMEOUT) { + puts(" TIMEOUT !\n"); + phy_dev->link = 0; + return 0; + } + + if (ctrlc()) { + puts("user interrupt!\n"); + phy_dev->link = 0; + return -EINTR; + } + + if ((i++ % 500) == 0) + printf("."); + + udelay(1000); /* 1 ms */ + status = readl(RGMII_STATUS_REG); + } while (!(status & RGMII_REG_STATUS_LINK)); + + puts(" done\n"); + + return 0; +} +#else int keystone_sgmii_config(struct phy_device *phy_dev, int port, int interface) { unsigned int i, status, mask; @@ -264,6 +297,7 @@ int keystone_sgmii_config(struct phy_device *phy_dev, int port, int interface) return 0; } +#endif int mac_sl_reset(u32 port) { @@ -315,7 +349,7 @@ int mac_sl_config(u_int16_t port, struct mac_sl_cfg *cfg) writel(cfg->max_rx_len, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_MAXLEN); writel(cfg->ctl, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_CTL); -#if defined(CONFIG_SOC_K2E) || defined(CONFIG_SOC_K2L) +#ifndef CONFIG_SOC_K2HK /* Map RX packet flow priority to 0 */ writel(0, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_RX_PRI_MAP); #endif @@ -401,8 +435,12 @@ static int keystone2_eth_open(struct eth_device *dev, bd_t *bis) if (sys_has_mdio) keystone2_mdio_reset(mdio_bus); +#ifdef CONFIG_SOC_K2G + keystone_rgmii_config(phy_dev); +#else keystone_sgmii_config(phy_dev, eth_priv->slave_port - 1, eth_priv->sgmii_link_type); +#endif udelay(10000); @@ -564,7 +602,9 @@ int keystone2_emac_initialize(struct eth_priv_t *eth_priv) return res; } +#ifndef CONFIG_SOC_K2G keystone2_net_serdes_setup(); +#endif /* Create phy device and bind it with driver */ #ifdef CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE @@ -589,6 +629,7 @@ struct ks2_serdes ks2_serdes_sgmii_156p25mhz = { .loopback = 0, }; +#ifndef CONFIG_SOC_K2G static void keystone2_net_serdes_setup(void) { ks2_serdes_init(CONFIG_KSNET_SERDES_SGMII_BASE, @@ -604,3 +645,4 @@ static void keystone2_net_serdes_setup(void) /* wait till setup */ udelay(5000); } +#endif |
