armv8/fsl-lsch3: Add Freescale Debug Server driver

The Debug Server driver is responsible for loading the Debug
server FW on the Service Processor (Cortex-A5 core) on LS2085A like
SoCs and then polling for the successful initialization of the same.
TOP MEM HIDE is adjusted to ensure the space required by Debug Server
FW is accounted for. MC uses the DDR area which is calculated as:

MC DDR region start = Top of DDR - area reserved by Debug Server FW

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>

3 files changed, 251 insertions, 0 deletions

diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 842209a2ec..25630c3f2b 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_CROS_EC_LPC) += cros_ec_lpc.o
 obj-$(CONFIG_CROS_EC_I2C) += cros_ec_i2c.o
 obj-$(CONFIG_CROS_EC_SANDBOX) += cros_ec_sandbox.o
 obj-$(CONFIG_CROS_EC_SPI) += cros_ec_spi.o
+obj-$(CONFIG_FSL_DEBUG_SERVER) += fsl_debug_server.o
 obj-$(CONFIG_FSL_IIM) += fsl_iim.o
 obj-$(CONFIG_GPIO_LED) += gpio_led.o
 obj-$(CONFIG_I2C_EEPROM) += i2c_eeprom.o
diff --git a/drivers/misc/fsl_debug_server.c b/drivers/misc/fsl_debug_server.c
new file mode 100644
index 0000000000..e080fe6132
--- /dev/null
+++ b/drivers/misc/fsl_debug_server.c
@@ -0,0 +1,246 @@
+/*
+ * Copyright (C) 2014 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/arch-fsl-lsch3/immap_lsch3.h>
+
+#include <fsl_debug_server.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+static int debug_server_ver_info_maj, debug_server_ver_info_min;
+
+/**
+ * Copying Debug Server firmware to DDR
+ */
+static int debug_server_copy_image(const char *title, u64 image_addr,
+				   u32 image_size, u64 debug_server_ram_addr)
+{
+	debug("%s copied to address %p\n", title,
+	      (void *)debug_server_ram_addr);
+	memcpy((void *)debug_server_ram_addr, (void *)image_addr, image_size);
+
+	return 0;
+}
+
+/**
+ * Debug Server FIT image parser checks if the image is in FIT
+ * format, verifies integrity of the image and calculates
+ * raw image address and size values.
+ *
+ * Returns 0 if success and -1 if any of the above mentioned
+ * task fail.
+ **/
+int debug_server_parse_firmware_fit_image(const void **raw_image_addr,
+					  size_t *raw_image_size)
+{
+	int format;
+	void *fit_hdr;
+	int node_offset;
+	const void *data;
+	size_t size;
+	const char *uname = "firmware";
+	char *desc;
+	char *debug_server_ver_info;
+	char *debug_server_ver_info_major, *debug_server_ver_info_minor;
+
+	/* Check if the image is in NOR flash */
+#ifdef CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
+	fit_hdr = (void *)CONFIG_SYS_DEBUG_SERVER_FW_ADDR;
+#else
+#error "CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR not defined"
+#endif
+
+	/* Check if Image is in FIT format */
+	format = genimg_get_format(fit_hdr);
+	if (format != IMAGE_FORMAT_FIT) {
+		printf("Error! Not a FIT image\n");
+		goto out_error;
+	}
+
+	if (!fit_check_format(fit_hdr)) {
+		printf("Error! Bad FIT image format\n");
+		goto out_error;
+	}
+
+	node_offset = fit_image_get_node(fit_hdr, uname);
+	if (node_offset < 0) {
+		printf("Error! Can not find %s subimage\n", uname);
+		goto out_error;
+	}
+
+	/* Verify Debug Server firmware image */
+	if (!fit_image_verify(fit_hdr, node_offset)) {
+		printf("Error! Bad Debug Server firmware hash");
+		goto out_error;
+	}
+
+	if (fit_get_desc(fit_hdr, node_offset, &desc) < 0) {
+		printf("Error! Failed to get Debug Server fw description");
+		goto out_error;
+	}
+
+	debug_server_ver_info = strstr(desc, "Version");
+	debug_server_ver_info_major = strtok(debug_server_ver_info, ".");
+	debug_server_ver_info_minor = strtok(NULL, ".");
+
+	debug_server_ver_info_maj =
+			simple_strtoul(debug_server_ver_info_major, NULL, 10);
+	debug_server_ver_info_min =
+			simple_strtoul(debug_server_ver_info_minor, NULL, 10);
+
+	/* Debug server version checking */
+	if ((debug_server_ver_info_maj < DEBUG_SERVER_VER_MAJOR) ||
+	    (debug_server_ver_info_min < DEBUG_SERVER_VER_MINOR)) {
+		printf("Debug server FW mismatches the min version required\n");
+		printf("Expected:%d.%d, Got %d.%d\n",
+		       DEBUG_SERVER_VER_MAJOR, DEBUG_SERVER_VER_MINOR,
+		       debug_server_ver_info_maj,
+		       debug_server_ver_info_min);
+		goto out_error;
+	}
+
+	/* Get address and size of raw image */
+	fit_image_get_data(fit_hdr, node_offset, &data, &size);
+
+	*raw_image_addr = data;
+	*raw_image_size = size;
+
+	return 0;
+
+out_error:
+	return -1;
+}
+
+/**
+ * Return the actual size of the Debug Server private DRAM block.
+ *
+ * NOTE: For now this function always returns the minimum required size,
+ * However, in the future, the actual size may be obtained from an environment
+ * variable.
+ */
+unsigned long debug_server_get_dram_block_size(void)
+{
+	return CONFIG_SYS_DEBUG_SERVER_DRAM_BLOCK_MIN_SIZE;
+}
+
+int debug_server_init(void)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	int error, timeout = CONFIG_SYS_DEBUG_SERVER_TIMEOUT;
+	int debug_server_boot_status;
+	u64 debug_server_ram_addr, debug_server_ram_size;
+	const void *raw_image_addr;
+	size_t raw_image_size = 0;
+
+	debug("debug_server_init called\n");
+	/*
+	 * The Debug Server private DRAM block was already carved at the end of
+	 * DRAM by board_init_f() using CONFIG_SYS_MEM_TOP_HIDE:
+	 */
+	debug_server_ram_size = debug_server_get_dram_block_size();
+	if (gd->bd->bi_dram[1].start)
+		debug_server_ram_addr =
+			gd->bd->bi_dram[1].start + gd->bd->bi_dram[1].size;
+	else
+		debug_server_ram_addr =
+			gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size;
+
+	error = debug_server_parse_firmware_fit_image(&raw_image_addr,
+							&raw_image_size);
+	if (error != 0)
+		goto out;
+
+	debug("debug server (ram addr = 0x%llx, ram size = 0x%llx)\n",
+	      debug_server_ram_addr, debug_server_ram_size);
+	/*
+	 * Load the Debug Server FW at the beginning of the Debug Server
+	 * private DRAM block:
+	 */
+	debug_server_copy_image("Debug Server Firmware",
+				(u64)raw_image_addr, raw_image_size,
+				debug_server_ram_addr);
+
+	/* flush dcache */
+	flush_dcache_range((unsigned long)debug_server_ram_addr,
+			   (unsigned long)debug_server_ram_addr +
+			   (unsigned long)debug_server_ram_size);
+
+	/*
+	 * Tell SP that the Debug Server FW is about to be launched. Before that
+	 * populate the following:
+	 * 1. Write the size allocated to SP Memory region into Bits {31:16} of
+	 *    SCRATCHRW5.
+	 * 2. Write the start address of the SP memory regions into
+	 *    SCRATCHRW5 (Bits {15:0}, contain most significant bits, Bits
+	 *    {47:32} of the SP Memory Region physical start address
+	 *    (SoC address)) and SCRATCHRW6 (Bits {31:0}).
+	 * 3. To know the Debug Server FW boot status, set bit 0 of SCRATCHRW11
+	 *    to 1. The Debug Server sets this to 0 to indicate a
+	 *    successul boot.
+	 * 4. Wakeup SP by writing 0x1F to VSG GIC reg VIGR2.
+	 */
+
+	/* 512 MB */
+	out_le32(&gur->scratchrw[5 - 1],
+		 (u32)((u64)debug_server_ram_addr >> 32) | (0x000D << 16));
+	out_le32(&gur->scratchrw[6 - 1],
+		 ((u32)debug_server_ram_addr) & 0xFFFFFFFF);
+
+	out_le32(&gur->scratchrw[11 - 1], DEBUG_SERVER_INIT_STATUS);
+	/* Allow the changes to reflect in GUR block */
+	mb();
+
+	/*
+	 * Program VGIC to raise an interrupt to SP
+	 */
+	out_le32(CONFIG_SYS_FSL_SP_VSG_GIC_VIGR2, 0x1F);
+	/* Allow the changes to reflect in VIGR2 */
+	mb();
+
+	dmb();
+	debug("Polling for Debug server to launch ...\n");
+
+	while (1) {
+		debug_server_boot_status = in_le32(&gur->scratchrw[11 - 1]);
+		if (!(debug_server_boot_status & DEBUG_SERVER_INIT_STATUS_MASK))
+			break;
+
+		udelay(1);	/* throttle polling */
+		if (timeout-- <= 0)
+			break;
+	}
+
+	if (timeout <= 0) {
+		printf("Debug Server FW timed out (boot status: 0x%x)\n",
+		       debug_server_boot_status);
+		error = -ETIMEDOUT;
+		goto out;
+	}
+
+	if (debug_server_boot_status & DEBUG_SERVER_INIT_STATUS_MASK) {
+		printf("Debug server FW error'ed out (boot status: 0x%x)\n",
+		       debug_server_boot_status);
+		error = -ENODEV;
+		goto out;
+	}
+
+	printf("Debug server booted\n");
+	printf("Detected firmware %d.%d, (boot status: 0x0%x)\n",
+	       debug_server_ver_info_maj, debug_server_ver_info_min,
+	       debug_server_boot_status);
+
+out:
+	if (error != 0)
+		debug_server_boot_status = -error;
+	else
+		debug_server_boot_status = 0;
+
+	return debug_server_boot_status;
+}
+
diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c
index 74b0085301..76581cbfda 100644
--- a/drivers/net/fsl-mc/mc.c
+++ b/drivers/net/fsl-mc/mc.c
@@ -9,6 +9,7 @@
 #include <fsl-mc/fsl_mc.h>
 #include <fsl-mc/fsl_mc_sys.h>
 #include <fsl-mc/fsl_dpmng.h>
+#include <fsl_debug_server.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 static int mc_boot_status;
@@ -112,6 +113,9 @@ int mc_init(bd_t *bis)
 			gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size;
 	}
 
+#ifdef CONFIG_FSL_DEBUG_SERVER
+		mc_ram_addr -= debug_server_get_dram_block_size();
+#endif
 	/*
 	 * Management Complex cores should be held at reset out of POR.
 	 * U-boot should be the first software to touch MC. To be safe,