dm: usb: Add driver-model support to ehci-pci

Support driver model in this driver. This uses the normal USB driver search
mechanism. Any EHCI controllers will be set up as they are found during
usb_init().

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>

1 files changed, 77 insertions, 20 deletions

diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 3d333bd465..0cb9fcc166 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -6,12 +6,45 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <errno.h>
 #include <pci.h>
 #include <usb.h>
 
 #include "ehci.h"
 
+/* Information about a USB port */
+struct ehci_pci_priv {
+	struct ehci_ctrl ehci;
+};
+
+static void ehci_pci_common_init(pci_dev_t pdev, struct ehci_hccr **ret_hccr,
+				 struct ehci_hcor **ret_hcor)
+{
+	struct ehci_hccr *hccr;
+	struct ehci_hcor *hcor;
+	uint32_t cmd;
+
+	hccr = (struct ehci_hccr *)pci_map_bar(pdev,
+			PCI_BASE_ADDRESS_0, PCI_REGION_MEM);
+	hcor = (struct ehci_hcor *)((uint32_t) hccr +
+			HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
+
+	debug("EHCI-PCI init hccr 0x%x and hcor 0x%x hc_length %d\n",
+	      (uint32_t)hccr, (uint32_t)hcor,
+	      (uint32_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
+
+	*ret_hccr = hccr;
+	*ret_hcor = hcor;
+
+	/* enable busmaster */
+	pci_read_config_dword(pdev, PCI_COMMAND, &cmd);
+	cmd |= PCI_COMMAND_MASTER;
+	pci_write_config_dword(pdev, PCI_COMMAND, cmd);
+}
+
+#ifndef CONFIG_DM_USB
+
 #ifdef CONFIG_PCI_EHCI_DEVICE
 static struct pci_device_id ehci_pci_ids[] = {
 	/* Please add supported PCI EHCI controller ids here */
@@ -20,7 +53,6 @@ static struct pci_device_id ehci_pci_ids[] = {
 	{0x12D8, 0x400F},	/* Pericom */
 	{0, 0}
 };
-#else
 #endif
 
 /*
@@ -31,9 +63,6 @@ int ehci_hcd_init(int index, enum usb_init_type init,
 		struct ehci_hccr **ret_hccr, struct ehci_hcor **ret_hcor)
 {
 	pci_dev_t pdev;
-	uint32_t cmd;
-	struct ehci_hccr *hccr;
-	struct ehci_hcor *hcor;
 
 #ifdef CONFIG_PCI_EHCI_DEVICE
 	pdev = pci_find_devices(ehci_pci_ids, CONFIG_PCI_EHCI_DEVICE);
@@ -44,23 +73,8 @@ int ehci_hcd_init(int index, enum usb_init_type init,
 		printf("EHCI host controller not found\n");
 		return -1;
 	}
+	ehci_pci_common_init(pdev, ret_hccr, ret_hcor);
 
-	hccr = (struct ehci_hccr *)pci_map_bar(pdev,
-			PCI_BASE_ADDRESS_0, PCI_REGION_MEM);
-	hcor = (struct ehci_hcor *)((uint32_t) hccr +
-			HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
-
-	debug("EHCI-PCI init hccr 0x%x and hcor 0x%x hc_length %d\n",
-			(uint32_t)hccr, (uint32_t)hcor,
-			(uint32_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
-
-	*ret_hccr = hccr;
-	*ret_hcor = hcor;
-
-	/* enable busmaster */
-	pci_read_config_dword(pdev, PCI_COMMAND, &cmd);
-	cmd |= PCI_COMMAND_MASTER;
-	pci_write_config_dword(pdev, PCI_COMMAND, cmd);
 	return 0;
 }
 
@@ -72,3 +86,46 @@ int ehci_hcd_stop(int index)
 {
 	return 0;
 }
+#endif /* nCONFIG_DM_USB */
+
+#ifdef CONFIG_DM_USB
+static int ehci_pci_probe(struct udevice *dev)
+{
+	struct ehci_hccr *hccr;
+	struct ehci_hcor *hcor;
+
+	ehci_pci_common_init(pci_get_bdf(dev), &hccr, &hcor);
+
+	return ehci_register(dev, hccr, hcor, NULL, 0, USB_INIT_HOST);
+}
+
+static int ehci_pci_remove(struct udevice *dev)
+{
+	int ret;
+
+	ret = ehci_deregister(dev);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+U_BOOT_DRIVER(ehci_pci) = {
+	.name	= "ehci_pci",
+	.id	= UCLASS_USB,
+	.probe = ehci_pci_probe,
+	.remove = ehci_pci_remove,
+	.ops	= &ehci_usb_ops,
+	.platdata_auto_alloc_size = sizeof(struct usb_platdata),
+	.priv_auto_alloc_size = sizeof(struct ehci_pci_priv),
+	.flags	= DM_FLAG_ALLOC_PRIV_DMA,
+};
+
+static struct pci_device_id ehci_pci_supported[] = {
+	{ PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_EHCI, ~0) },
+	{},
+};
+
+U_BOOT_PCI_DEVICE(ehci_pci, ehci_pci_supported);
+
+#endif /* CONFIG_DM_USB */