Add board support for armadillo HT1070

Patch by Rowel Atienza, 06 Apr 2005

1 files changed, 98 insertions, 98 deletions

diff --git a/drivers/eepro100.c b/drivers/eepro100.c
index 9db7bd80c2..0054e87571 100644
--- a/drivers/eepro100.c
+++ b/drivers/eepro100.c
@@ -34,67 +34,67 @@
 
 	/* Ethernet chip registers.
 	 */
-#define SCBStatus       	0	/* Rx/Command Unit Status *Word* */
-#define SCBIntAckByte   	1	/* Rx/Command Unit STAT/ACK byte */
-#define SCBCmd          	2	/* Rx/Command Unit Command *Word* */
-#define SCBIntrCtlByte  	3	/* Rx/Command Unit Intr.Control Byte */
-#define SCBPointer      	4	/* General purpose pointer. */
-#define SCBPort         	8	/* Misc. commands and operands. */
-#define SCBflash        	12	/* Flash memory control. */
-#define SCBeeprom       	14	/* EEPROM memory control. */
-#define SCBCtrlMDI      	16	/* MDI interface control. */
-#define SCBEarlyRx      	20	/* Early receive byte count. */
-#define SCBGenControl   	28	/* 82559 General Control Register */
-#define SCBGenStatus    	29	/* 82559 General Status register */
+#define SCBStatus		0	/* Rx/Command Unit Status *Word* */
+#define SCBIntAckByte		1	/* Rx/Command Unit STAT/ACK byte */
+#define SCBCmd			2	/* Rx/Command Unit Command *Word* */
+#define SCBIntrCtlByte		3	/* Rx/Command Unit Intr.Control Byte */
+#define SCBPointer		4	/* General purpose pointer. */
+#define SCBPort			8	/* Misc. commands and operands. */
+#define SCBflash		12	/* Flash memory control. */
+#define SCBeeprom		14	/* EEPROM memory control. */
+#define SCBCtrlMDI		16	/* MDI interface control. */
+#define SCBEarlyRx		20	/* Early receive byte count. */
+#define SCBGenControl		28	/* 82559 General Control Register */
+#define SCBGenStatus		29	/* 82559 General Status register */
 
 	/* 82559 SCB status word defnitions
 	 */
-#define SCB_STATUS_CX   	0x8000	/* CU finished command (transmit) */
-#define SCB_STATUS_FR   	0x4000	/* frame received */
-#define SCB_STATUS_CNA  	0x2000	/* CU left active state */
-#define SCB_STATUS_RNR  	0x1000	/* receiver left ready state */
-#define SCB_STATUS_MDI  	0x0800	/* MDI read/write cycle done */
-#define SCB_STATUS_SWI  	0x0400	/* software generated interrupt */
-#define SCB_STATUS_FCP  	0x0100	/* flow control pause interrupt */
+#define SCB_STATUS_CX		0x8000	/* CU finished command (transmit) */
+#define SCB_STATUS_FR		0x4000	/* frame received */
+#define SCB_STATUS_CNA		0x2000	/* CU left active state */
+#define SCB_STATUS_RNR		0x1000	/* receiver left ready state */
+#define SCB_STATUS_MDI		0x0800	/* MDI read/write cycle done */
+#define SCB_STATUS_SWI		0x0400	/* software generated interrupt */
+#define SCB_STATUS_FCP		0x0100	/* flow control pause interrupt */
 
-#define SCB_INTACK_MASK 	0xFD00	/* all the above */
+#define SCB_INTACK_MASK		0xFD00	/* all the above */
 
-#define SCB_INTACK_TX 		(SCB_STATUS_CX | SCB_STATUS_CNA)
-#define SCB_INTACK_RX 		(SCB_STATUS_FR | SCB_STATUS_RNR)
+#define SCB_INTACK_TX		(SCB_STATUS_CX | SCB_STATUS_CNA)
+#define SCB_INTACK_RX		(SCB_STATUS_FR | SCB_STATUS_RNR)
 
 	/* System control block commands
 	 */
 /* CU Commands */
-#define CU_NOP          	0x0000
-#define	CU_START        	0x0010
-#define	CU_RESUME       	0x0020
-#define	CU_STATSADDR    	0x0040	/* Load Dump Statistics ctrs addr */
-#define	CU_SHOWSTATS    	0x0050	/* Dump statistics counters. */
-#define	CU_ADDR_LOAD    	0x0060	/* Base address to add to CU commands */
-#define	CU_DUMPSTATS    	0x0070	/* Dump then reset stats counters. */
+#define CU_NOP			0x0000
+#define CU_START		0x0010
+#define CU_RESUME		0x0020
+#define CU_STATSADDR		0x0040	/* Load Dump Statistics ctrs addr */
+#define CU_SHOWSTATS		0x0050	/* Dump statistics counters. */
+#define CU_ADDR_LOAD		0x0060	/* Base address to add to CU commands */
+#define CU_DUMPSTATS		0x0070	/* Dump then reset stats counters. */
 
 /* RUC Commands */
-#define RUC_NOP         	0x0000
-#define	RUC_START       	0x0001
-#define	RUC_RESUME      	0x0002
-#define RUC_ABORT       	0x0004
-#define	RUC_ADDR_LOAD   	0x0006	/* (seems not to clear on acceptance) */
-#define RUC_RESUMENR    	0x0007
-
-#define CU_CMD_MASK     	0x00f0
-#define RU_CMD_MASK     	0x0007
-
-#define SCB_M	        	0x0100	/* 0 = enable interrupt, 1 = disable */
-#define SCB_SWI         	0x0200	/* 1 - cause device to interrupt */
-
-#define CU_STATUS_MASK  	0x00C0
-#define RU_STATUS_MASK  	0x003C
-
-#define RU_STATUS_IDLE  	(0<<2)
-#define RU_STATUS_SUS   	(1<<2)
-#define RU_STATUS_NORES 	(2<<2)
-#define RU_STATUS_READY 	(4<<2)
-#define RU_STATUS_NO_RBDS_SUS   ((1<<2)|(8<<2))
+#define RUC_NOP			0x0000
+#define RUC_START		0x0001
+#define RUC_RESUME		0x0002
+#define RUC_ABORT		0x0004
+#define RUC_ADDR_LOAD		0x0006	/* (seems not to clear on acceptance) */
+#define RUC_RESUMENR		0x0007
+
+#define CU_CMD_MASK		0x00f0
+#define RU_CMD_MASK		0x0007
+
+#define SCB_M			0x0100	/* 0 = enable interrupt, 1 = disable */
+#define SCB_SWI			0x0200	/* 1 - cause device to interrupt */
+
+#define CU_STATUS_MASK		0x00C0
+#define RU_STATUS_MASK		0x003C
+
+#define RU_STATUS_IDLE		(0<<2)
+#define RU_STATUS_SUS		(1<<2)
+#define RU_STATUS_NORES		(2<<2)
+#define RU_STATUS_READY		(4<<2)
+#define RU_STATUS_NO_RBDS_SUS	((1<<2)|(8<<2))
 #define RU_STATUS_NO_RBDS_NORES ((2<<2)|(8<<2))
 #define RU_STATUS_NO_RBDS_READY ((4<<2)|(8<<2))
 
@@ -138,27 +138,27 @@ struct RxFD {
 };
 
 #define RFD_STATUS_C		0x8000	/* completion of received frame */
-#define RFD_STATUS_OK   	0x2000	/* frame received with no errors */
-
-#define RFD_CONTROL_EL   	0x8000	/* 1=last RFD in RFA */
-#define RFD_CONTROL_S    	0x4000	/* 1=suspend RU after receiving frame */
-#define RFD_CONTROL_H    	0x0010	/* 1=RFD is a header RFD */
-#define RFD_CONTROL_SF   	0x0008	/* 0=simplified, 1=flexible mode */
-
-#define RFD_COUNT_MASK     	0x3fff
-#define RFD_COUNT_F        	0x4000
-#define RFD_COUNT_EOF      	0x8000
-
-#define RFD_RX_CRC          	0x0800	/* crc error */
-#define RFD_RX_ALIGNMENT    	0x0400	/* alignment error */
-#define RFD_RX_RESOURCE     	0x0200	/* out of space, no resources */
-#define RFD_RX_DMA_OVER     	0x0100	/* DMA overrun */
-#define RFD_RX_SHORT        	0x0080	/* short frame error */
-#define RFD_RX_LENGTH       	0x0020
-#define RFD_RX_ERROR        	0x0010	/* receive error */
-#define RFD_RX_NO_ADR_MATCH 	0x0004	/* no address match */
-#define RFD_RX_IA_MATCH     	0x0002	/* individual address does not match */
-#define RFD_RX_TCO          	0x0001	/* TCO indication */
+#define RFD_STATUS_OK		0x2000	/* frame received with no errors */
+
+#define RFD_CONTROL_EL		0x8000	/* 1=last RFD in RFA */
+#define RFD_CONTROL_S		0x4000	/* 1=suspend RU after receiving frame */
+#define RFD_CONTROL_H		0x0010	/* 1=RFD is a header RFD */
+#define RFD_CONTROL_SF		0x0008	/* 0=simplified, 1=flexible mode */
+
+#define RFD_COUNT_MASK		0x3fff
+#define RFD_COUNT_F		0x4000
+#define RFD_COUNT_EOF		0x8000
+
+#define RFD_RX_CRC		0x0800	/* crc error */
+#define RFD_RX_ALIGNMENT	0x0400	/* alignment error */
+#define RFD_RX_RESOURCE		0x0200	/* out of space, no resources */
+#define RFD_RX_DMA_OVER		0x0100	/* DMA overrun */
+#define RFD_RX_SHORT		0x0080	/* short frame error */
+#define RFD_RX_LENGTH		0x0020
+#define RFD_RX_ERROR		0x0010	/* receive error */
+#define RFD_RX_NO_ADR_MATCH	0x0004	/* no address match */
+#define RFD_RX_IA_MATCH		0x0002	/* individual address does not match */
+#define RFD_RX_TCO		0x0001	/* TCO indication */
 
 	/* Transmit frame descriptors
 	 */
@@ -176,45 +176,45 @@ struct TxFD {				/* Transmit frame descriptor set. */
 };
 
 #define TxCB_CMD_TRANSMIT	0x0004	/* transmit command */
-#define TxCB_CMD_SF         	0x0008	/* 0=simplified, 1=flexible mode */
-#define TxCB_CMD_NC         	0x0010	/* 0=CRC insert by controller */
-#define TxCB_CMD_I          	0x2000	/* generate interrupt on completion */
-#define TxCB_CMD_S          	0x4000	/* suspend on completion */
-#define TxCB_CMD_EL         	0x8000	/* last command block in CBL */
+#define TxCB_CMD_SF		0x0008	/* 0=simplified, 1=flexible mode */
+#define TxCB_CMD_NC		0x0010	/* 0=CRC insert by controller */
+#define TxCB_CMD_I		0x2000	/* generate interrupt on completion */
+#define TxCB_CMD_S		0x4000	/* suspend on completion */
+#define TxCB_CMD_EL		0x8000	/* last command block in CBL */
 
-#define TxCB_COUNT_MASK     	0x3fff
-#define TxCB_COUNT_EOF      	0x8000
+#define TxCB_COUNT_MASK		0x3fff
+#define TxCB_COUNT_EOF		0x8000
 
 	/* The Speedo3 Rx and Tx frame/buffer descriptors.
 	 */
 struct descriptor {			/* A generic descriptor. */
 	volatile u16 status;
 	volatile u16 command;
-	volatile u32 link;		/* struct descriptor *  */
+	volatile u32 link;		/* struct descriptor *	*/
 
 	unsigned char params[0];
 };
 
-#define CFG_CMD_EL         	0x8000
-#define CFG_CMD_SUSPEND    	0x4000
-#define CFG_CMD_INT        	0x2000
-#define CFG_CMD_IAS        	0x0001	/* individual address setup */
-#define CFG_CMD_CONFIGURE  	0x0002	/* configure */
+#define CFG_CMD_EL		0x8000
+#define CFG_CMD_SUSPEND		0x4000
+#define CFG_CMD_INT		0x2000
+#define CFG_CMD_IAS		0x0001	/* individual address setup */
+#define CFG_CMD_CONFIGURE	0x0002	/* configure */
 
-#define CFG_STATUS_C       	0x8000
-#define CFG_STATUS_OK      	0x2000
+#define CFG_STATUS_C		0x8000
+#define CFG_STATUS_OK		0x2000
 
 	/* Misc.
 	 */
-#define NUM_RX_DESC 		PKTBUFSRX
-#define NUM_TX_DESC 		1	/* Number of TX descriptors   */
+#define NUM_RX_DESC		PKTBUFSRX
+#define NUM_TX_DESC		1	/* Number of TX descriptors   */
 
 #define TOUT_LOOP		1000000
 
 #define ETH_ALEN		6
 
-static struct RxFD rx_ring[NUM_RX_DESC];	/* RX descriptor ring         */
-static struct TxFD tx_ring[NUM_TX_DESC];	/* TX descriptor ring         */
+static struct RxFD rx_ring[NUM_RX_DESC];	/* RX descriptor ring	      */
+static struct TxFD tx_ring[NUM_TX_DESC];	/* TX descriptor ring	      */
 static int rx_next;			/* RX descriptor ring pointer */
 static int tx_next;			/* TX descriptor ring pointer */
 static int tx_threshold;
@@ -277,26 +277,26 @@ static inline int INL (struct eth_device *dev, u_long addr)
 	return le32_to_cpu (*(volatile u32 *) (addr + dev->iobase));
 }
 
-int miiphy_read (unsigned char  addr,
-                unsigned char  reg,
-                unsigned short *value)
+int miiphy_read (unsigned char	addr,
+		unsigned char  reg,
+		unsigned short *value)
 {
 	int cmd = (2 << 26) | ((addr & 0x1f) << 21) | ((reg & 0x1f) << 16);
 
 	struct eth_device *dev = eth_get_dev ();
 
 	OUTL (dev, cmd, SCBCtrlMDI);
-	
+
 	do {
 		cmd = INL (dev, SCBCtrlMDI);
 	} while (!(cmd & (1 << 28)));
 
 	*value = (unsigned short) (cmd & 0xffff);
-	
+
 	return 0;
 }
 
-int miiphy_write (unsigned char  addr,
+int miiphy_write (unsigned char	 addr,
 		unsigned char  reg,
 		unsigned short value)
 {
@@ -764,12 +764,12 @@ int eepro100_write_eeprom (struct eth_device* dev, int location, int addr_len, u
     OUTW(dev, EE_ENB | dataval, SCBeeprom);
     udelay(1);
 
-    datalong = datalong << 1; /* Adjust significant data bit*/
+    datalong = datalong << 1;	/* Adjust significant data bit*/
     }
 
     /* Finish up command  (toggle CS) */
     OUTW(dev, EE_ENB & ~EE_CS, SCBeeprom);
-    udelay(1);                /* delay for more than 250 ns */
+    udelay(1);			/* delay for more than 250 ns */
     OUTW(dev, EE_ENB, SCBeeprom);
 
     /* Wait for programming ready (D0 = 1) */