diff options
| author | Tom Rini <trini@konsulko.com> | 2015-05-05 14:57:23 -0400 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2015-05-05 14:57:23 -0400 |
| commit | d81572c272d4b0980fb9b8a02e1357090b002398 (patch) | |
| tree | 4b2f774d628ab51944f0ba1ff83c15ef6b082a0f /doc | |
| parent | 1131d4e22cf8f13d0dabaad7f1b84d9baffdfbd6 (diff) | |
| parent | 8b0044ff5942943eaa49935f49d5006b346a60f8 (diff) | |
| download | talos-obmc-uboot-d81572c272d4b0980fb9b8a02e1357090b002398.tar.gz talos-obmc-uboot-d81572c272d4b0980fb9b8a02e1357090b002398.zip | |
Merge git://git.denx.de/u-boot-mpc85xx
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/README.fsl-esdhc | 28 |
1 files changed, 23 insertions, 5 deletions
diff --git a/doc/README.fsl-esdhc b/doc/README.fsl-esdhc index 619c6b2d07..7e71387576 100644 --- a/doc/README.fsl-esdhc +++ b/doc/README.fsl-esdhc @@ -1,6 +1,24 @@ -CONFIG_SYS_FSL_ESDHC_LE means ESDHC IP is in little-endian mode. -CONFIG_SYS_FSL_ESDHC_BE means ESDHC IP is in big-endian mode. -CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT forces to run at 1.8V. +Freescale esdhc-specific options -Accessing ESDHC registers can be determined by ESDHC IP's endian -mode or processor's endian mode. + - CONFIG_FSL_ESDHC_ADAPTER_IDENT + Support Freescale adapter card type identification. This is implemented by + operating Qixis FPGA relevant registers. The STAT_PRES1 register has SDHC + Card ID[0:2] bits showing the type of card installed in the SDHC Adapter Slot. + + SDHC Card ID[0:2] Adapter Card Type + 0b000 reserved + 0b001 eMMC Card Rev4.5 + 0b010 SD/MMC Legacy Card + 0b011 eMMC Card Rev4.4 + 0b100 reserved + 0b101 MMC Card + 0b110 SD Card Rev2.0/3.0 + 0b111 No card is present + - CONFIG_SYS_FSL_ESDHC_LE + ESDHC IP is in little-endian mode. Accessing ESDHC registers can be + determined by ESDHC IP's endian mode or processor's endian mode. + - CONFIG_SYS_FSL_ESDHC_BE + ESDHC IP is in big-endian mode. Accessing ESDHC registers can be determined + by ESDHC IP's endian mode or processor's endian mode. + + - CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT forces to run at 1.8V. |
