Move arch/ppc to arch/powerpc

As discussed on the list, move "arch/ppc" to "arch/powerpc" to
better match the Linux directory structure.

Please note that this patch also changes the "ppc" target in
MAKEALL to "powerpc" to match this new infrastructure. But "ppc"
is kept as an alias for now, to not break compatibility with
scripts using this name.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Anatolij Gustschin <agust@denx.de>

9 files changed, 49 insertions, 49 deletions

diff --git a/doc/README.IPHASE4539 b/doc/README.IPHASE4539
index b804e069a1..c5146d9b18 100644
--- a/doc/README.IPHASE4539
+++ b/doc/README.IPHASE4539
@@ -333,7 +333,7 @@ Linux:
 	$ make oldconfig
 	$ make dep
 	$ make uImage
-	$ cp -p arch/ppc/mbxboot/uImage /tftpboot
+	$ cp -p arch/powerpc/mbxboot/uImage /tftpboot
 
 	Load uImage via tftp and boot it.
 
diff --git a/doc/README.PIP405 b/doc/README.PIP405
index e8a654128d..012db1c5f7 100644
--- a/doc/README.PIP405
+++ b/doc/README.PIP405
@@ -17,11 +17,11 @@ Changed files:
 				added console settings from environment
 - common/devices.c		added ISA keyboard init
 - common/main.c			corrected the read of bootdelay
-- arch/ppc/cpu/ppc4xx/405gp_pci.c	excluded file from PIP405
-- arch/ppc/cpu/ppc4xx/i2c.c		added 16bit read write I2C support
+- arch/powerpc/cpu/ppc4xx/405gp_pci.c	excluded file from PIP405
+- arch/powerpc/cpu/ppc4xx/i2c.c		added 16bit read write I2C support
 				added page write
-- arch/ppc/cpu/ppc4xx/speed.c		added get_PCI_freq
-- arch/ppc/cpu/ppc4xx/start.S		added CONFIG_IDENT_STRING
+- arch/powerpc/cpu/ppc4xx/speed.c		added get_PCI_freq
+- arch/powerpc/cpu/ppc4xx/start.S		added CONFIG_IDENT_STRING
 - disk/Makefile			added part_iso for CD support
 - disk/part.c			changed to work with block device description
 				added ISO CD support
@@ -275,7 +275,7 @@ Added the config variable CONFIG_IDENT_STRING which will be added to the
 "U_BOOT_VERSION __TIME__ DATE___ " String, to allows to identify intermidiate
 and custom versions.
 Changed files:
-- arch/ppc/cpu/ppc4xx/start.s
+- arch/powerpc/cpu/ppc4xx/start.s
 
 Firmware Image:
 ---------------
@@ -288,11 +288,11 @@ Changed files:
 
 Correct PCI Frequency for PPC405:
 ---------------------------------
-Added function (in arch/ppc/cpu/ppc4xx/speed.c) to get the PCI frequency for PPC405 CPU.
+Added function (in arch/powerpc/cpu/ppc4xx/speed.c) to get the PCI frequency for PPC405 CPU.
 The PCI Frequency will now be set correct in the board description in common/board.c.
 (was set to the busfreq before).
 Changed files:
-- arch/ppc/cpu/ppc4xx/speed.c
+- arch/powerpc/cpu/ppc4xx/speed.c
 - common/board.c
 
 I2C Stuff:
@@ -301,7 +301,7 @@ Added defined(CONFIG_PIP405) at several points in common/cmd_i2c.c.
 Added 16bit read/write support for I2C (PPC405), and page write to
 I2C EEPROM if defined CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE.
 Changed files:
-- arch/ppc/cpu/ppc4xx/i2c.c
+- arch/powerpc/cpu/ppc4xx/i2c.c
 - common/cmd_i2c.c
 
 Environment / Console:
diff --git a/doc/README.POST b/doc/README.POST
index 0d5e20e977..eeb218d39c 100644
--- a/doc/README.POST
+++ b/doc/README.POST
@@ -713,7 +713,7 @@ use external loopback for testing. That will need appropriate
 reconfiguration of the physical interface chip.
 
 The test routines for the SCC ethernet tests will be located in
-arch/ppc/cpu/mpc8xx/scc.c.
+arch/powerpc/cpu/mpc8xx/scc.c.
 
 2.2.3.2. UART tests (SMC/SCC)
 
@@ -725,7 +725,7 @@ will be transmitted. These tests may be enhanced to make to perform
 test will be executed manually.
 
 The test routine for the SMC/SCC UART tests will be located in
-arch/ppc/cpu/mpc8xx/serial.c.
+arch/powerpc/cpu/mpc8xx/serial.c.
 
 2.2.3.3. USB test
 
diff --git a/doc/README.RPXlite b/doc/README.RPXlite
index 0aa4d11303..3ca671126d 100644
--- a/doc/README.RPXlite
+++ b/doc/README.RPXlite
@@ -116,7 +116,7 @@
 	board/RPXLITE/RPXLITE.c		/* DRAM-related routines */
 	board/RPXLITE/flash.c		/* flash-related routines */
 	board/RPXLITE/config.mk		/* set text base address */
-	arch/ppc/cpu/mpc8xx/serial.c			/* board specific register setting */
+	arch/powerpc/cpu/mpc8xx/serial.c /* board specific register setting */
 	include/config_RPXLITE.h	/* board specific registers */
 
 	See 'reg_config.txt' for register values in detail.
diff --git a/doc/README.TQM8260 b/doc/README.TQM8260
index e64e64a3e2..93b55068f5 100644
--- a/doc/README.TQM8260
+++ b/doc/README.TQM8260
@@ -14,10 +14,10 @@ The following common files have been modified by this project:
 
 MAKEALL			- TQM8260 entry added
 Makefile		- TQM8260_config entry added
-arch/ppc/cpu/mpc8260/Makefile	- soft_i2c.o module added
-arch/ppc/cpu/mpc8260/ether_scc.c	- TQM8260-specific definitions added, an obvious
+arch/powerpc/cpu/mpc8260/Makefile	- soft_i2c.o module added
+arch/powerpc/cpu/mpc8260/ether_scc.c	- TQM8260-specific definitions added, an obvious
 			  bug fixed (fcr -> scr)
-arch/ppc/cpu/mpc8260/ether_fcc.c	- TQM8260-specific definitions added
+arch/powerpc/cpu/mpc8260/ether_fcc.c	- TQM8260-specific definitions added
 include/flash.h		- added definitions for the AM29LV640D Flash chip
 
 
@@ -33,7 +33,7 @@ board/tqm8260/config.mk	  - config file
 board/tqm8260/flash.c	  - flash driver (for AM29LV640D)
 board/tqm8260/ppcboot.lds - linker script
 board/tqm8260/tqm8260.c	  - ioport and memory initialization
-arch/ppc/cpu/mpc8260/soft_i2c.c	  - software i2c EEPROM driver
+arch/powerpc/cpu/mpc8260/soft_i2c.c	  - software i2c EEPROM driver
 include/config_TQM8260.h  - main configuration file
 
 
diff --git a/doc/README.alaska8220 b/doc/README.alaska8220
index 9249cfb31e..334507397d 100644
--- a/doc/README.alaska8220
+++ b/doc/README.alaska8220
@@ -22,7 +22,7 @@ Changed files:
 - include/asm-ppc/global_data.h added global variables - inp_clk, pci_clk,
 			    vco_clk, pev_clk, flb_clk, and bExtUart
 
-- arch/ppc/lib/board.c	    added CONFIG_MPC8220 support
+- arch/powerpc/lib/board.c	    added CONFIG_MPC8220 support
 
 - net/eth.c		    added FEC support for MPC8220
 
@@ -37,24 +37,24 @@ Added files:
 - board/alaska/config.mk    config make
 - board/alaska/u-boot.lds   Linker description
 
-- arch/ppc/cpu/mpc8220/dma.h	    multi-channel dma header file
-- arch/ppc/cpu/mpc8220/dramSetup.h   dram setup header file
-- arch/ppc/cpu/mpc8220/fec.h	    MPC8220 FEC header file
-- arch/ppc/cpu/mpc8220/cpu.c	    cpu specific code
-- arch/ppc/cpu/mpc8220/cpu_init.c    Flexbus ChipSelect and Mux pins setup
-- arch/ppc/cpu/mpc8220/dramSetup.c   MPC8220 DDR SDRAM setup
-- arch/ppc/cpu/mpc8220/fec.c	    MPC8220 FEC driver
-- arch/ppc/cpu/mpc8220/i2c.c	    MPC8220 I2C driver
-- arch/ppc/cpu/mpc8220/interrupts.c  interrupt support (not enable)
-- arch/ppc/cpu/mpc8220/loadtask.c    load dma
-- arch/ppc/cpu/mpc8220/speed.c	    system, pci, flexbus, pev, and cpu clock
-- arch/ppc/cpu/mpc8220/traps.c	    exception
-- arch/ppc/cpu/mpc8220/uart.c	    MPC8220 UART driver
-- arch/ppc/cpu/mpc8220/Makefile	    Makefile
-- arch/ppc/cpu/mpc8220/config.mk	    config make
-- arch/ppc/cpu/mpc8220/fec_dma_task.S MPC8220 FEC multi-channel dma program
-- arch/ppc/cpu/mpc8220/io.S	    io functions
-- arch/ppc/cpu/mpc8220/start.S	    start up
+- arch/powerpc/cpu/mpc8220/dma.h	    multi-channel dma header file
+- arch/powerpc/cpu/mpc8220/dramSetup.h   dram setup header file
+- arch/powerpc/cpu/mpc8220/fec.h	    MPC8220 FEC header file
+- arch/powerpc/cpu/mpc8220/cpu.c	    cpu specific code
+- arch/powerpc/cpu/mpc8220/cpu_init.c    Flexbus ChipSelect and Mux pins setup
+- arch/powerpc/cpu/mpc8220/dramSetup.c   MPC8220 DDR SDRAM setup
+- arch/powerpc/cpu/mpc8220/fec.c	    MPC8220 FEC driver
+- arch/powerpc/cpu/mpc8220/i2c.c	    MPC8220 I2C driver
+- arch/powerpc/cpu/mpc8220/interrupts.c  interrupt support (not enable)
+- arch/powerpc/cpu/mpc8220/loadtask.c    load dma
+- arch/powerpc/cpu/mpc8220/speed.c	    system, pci, flexbus, pev, and cpu clock
+- arch/powerpc/cpu/mpc8220/traps.c	    exception
+- arch/powerpc/cpu/mpc8220/uart.c	    MPC8220 UART driver
+- arch/powerpc/cpu/mpc8220/Makefile	    Makefile
+- arch/powerpc/cpu/mpc8220/config.mk	    config make
+- arch/powerpc/cpu/mpc8220/fec_dma_task.S MPC8220 FEC multi-channel dma program
+- arch/powerpc/cpu/mpc8220/io.S	    io functions
+- arch/powerpc/cpu/mpc8220/start.S	    start up
 
 - include/mpc8220.h
 
diff --git a/doc/README.bedbug b/doc/README.bedbug
index 4c1e6c4d5b..35e9d2706a 100644
--- a/doc/README.bedbug
+++ b/doc/README.bedbug
@@ -18,15 +18,15 @@ can be easily implemented.
 ./common/board.c
 	Added call to initialize debugger on startup.
 
-./arch/ppc/cpu/ppc4xx/Makefile
+./arch/powerpc/cpu/ppc4xx/Makefile
 	Added bedbug_405.c to the Makefile.
 
-./arch/ppc/cpu/ppc4xx/start.S
+./arch/powerpc/cpu/ppc4xx/start.S
 	Added code to handle the debug exception (0x2000) on the 405.
 	Also added code to handle critical exceptions since the debug
 	is treated as critical on the 405.
 
-./arch/ppc/cpu/ppc4xx/traps.c
+./arch/powerpc/cpu/ppc4xx/traps.c
 	Added more detailed output for the program exception to tell
 	if it is an illegal instruction, privileged instruction or
 	a trap. Also added debug trap handler.
@@ -51,7 +51,7 @@ can be easily implemented.
 	hardware breakpoints and stepping through code.  These
 	routines are common to all PowerPC processors.
 
-./arch/ppc/cpu/ppc4xx/bedbug_405.c
+./arch/powerpc/cpu/ppc4xx/bedbug_405.c
 	AMCC  PPC405 specific debugger routines.
 
 
@@ -63,16 +63,16 @@ Changes:
 	common/cmd_bedbug.c
 		Added call to initialize 860 debugger.
 
-	arch/ppc/cpu/mpc8xx/Makefile
+	arch/powerpc/cpu/mpc8xx/Makefile
 		Added new file "bedbug_860.c" to the makefile
 
-	arch/ppc/cpu/mpc8xx/start.S
+	arch/powerpc/cpu/mpc8xx/start.S
 		Added handler for InstructionBreakpoint (0xfd00)
 
-	arch/ppc/cpu/mpc8xx/traps.c
+	arch/powerpc/cpu/mpc8xx/traps.c
 		Added new routine DebugException()
 
 New Files:
 
-	arch/ppc/cpu/mpc8xx/bedbug_860.c
+	arch/powerpc/cpu/mpc8xx/bedbug_860.c
 		CPU-specific routines for 860 debug registers.
diff --git a/doc/README.mpc5xx b/doc/README.mpc5xx
index 26fb0c27dc..df51b5cf5c 100644
--- a/doc/README.mpc5xx
+++ b/doc/README.mpc5xx
@@ -25,7 +25,7 @@ Added or Changed Files:
 u-boot-0.2.0/common/cmd_boot.c
 u-boot-0.2.0/common/cmd_reginfo.c
 u-boot-0.2.0/common/environment.c
-u-boot-0.2.0/arch/ppc/cpu/mpc5xx/*
+u-boot-0.2.0/arch/powerpc/cpu/mpc5xx/*
 u-boot-0.2.0/include/cmd_reginfo.h
 u-boot-0.2.0/include/common.h
 u-boot-0.2.0/include/ppc_asm.tmpl
@@ -34,9 +34,9 @@ u-boot-0.2.0/include/mpc5xx.h
 u-boot-0.2.0/include/status_led.h
 u-boot-0.2.0/include/asm-ppc/u-boot.h
 u-boot-0.2.0/include/asm-ppc/5xx_immap.h
-u-boot-0.2.0/arch/ppc/lib/board.c
-u-boot-0.2.0/arch/ppc/lib/cache.c
-u-boot-0.2.0/arch/ppc/lib/time.c
+u-boot-0.2.0/arch/powerpc/lib/board.c
+u-boot-0.2.0/arch/powerpc/lib/cache.c
+u-boot-0.2.0/arch/powerpc/lib/time.c
 u-boot-0.2.0/Makefile
 u-boot-0.2.0/CREDITS
 u-boot-0.2.0/doc/README.mpc5xx
diff --git a/doc/README.mpc85xxads b/doc/README.mpc85xxads
index ae8202bdd1..046f981cf0 100644
--- a/doc/README.mpc85xxads
+++ b/doc/README.mpc85xxads
@@ -124,8 +124,8 @@ Updated 13-July-2004 Jon Loeliger
     kernel's ppcboot.h is consistent with U-Boot's u-boot.h. You can use two
     default configuration files as your starting points to configure the
     kernel:
-	arch/ppc/configs/mpc8540_ads_defconfig
-	arch/ppc/configs/mpc8560_ads_defconfig
+	arch/powerpc/configs/mpc8540_ads_defconfig
+	arch/powerpc/configs/mpc8560_ads_defconfig
 
 3. DEFINITIONS AND COMPILATION