Merge branch 'u-boot/master' into 'u-boot-arm/master'

Trivial merge conflict, needed to manually remove
local_info as per commit 41364f0f.

Conflicts:
	board/samsung/common/board.c

6 files changed, 28 insertions, 6 deletions

diff --git a/doc/README.SPL b/doc/README.SPL
index b1bc3ca569..57a39a489b 100644
--- a/doc/README.SPL
+++ b/doc/README.SPL
@@ -13,7 +13,7 @@ can be reused. No code duplication or symlinking is necessary anymore.
 How it works
 ------------
 
-There is a new directory TOPDIR/spl which contains only a Makefile.
+There is a new directory $(srctree)/spl which contains only a Makefile.
 The object files are built separately for SPL and placed in this directory.
 The final binaries which are generated are u-boot-spl, u-boot-spl.bin and
 u-boot-spl.map.
diff --git a/doc/README.TPL b/doc/README.TPL
index 1df03b958e..980debe777 100644
--- a/doc/README.TPL
+++ b/doc/README.TPL
@@ -19,7 +19,7 @@ board can be reused. No code duplication or symlinking is necessary anymore.
 How it works
 ------------
 
-There has been a directory TOPDIR/spl which contains only a Makefile. The
+There has been a directory $(srctree)/spl which contains only a Makefile. The
 Makefile is shared by SPL and TPL.
 
 The object files are built separately for SPL/TPL and placed in the
diff --git a/doc/README.commands b/doc/README.commands
index 9eb367104f..afd5577b0a 100644
--- a/doc/README.commands
+++ b/doc/README.commands
@@ -28,7 +28,7 @@ these symbols when linking full U-Boot even though they are not
 referenced in the source code as such.
 
 If a new board is defined do not forget to define the command section
-by writing in u-boot.lds ($(TOPDIR)/board/boardname/u-boot.lds) these
+by writing in u-boot.lds ($(srctree)/board/boardname/u-boot.lds) these
 3 lines:
 
 	.u_boot_list : {
diff --git a/doc/README.kwbimage b/doc/README.kwbimage
index 8ed708c356..13f6f92f68 100644
--- a/doc/README.kwbimage
+++ b/doc/README.kwbimage
@@ -42,7 +42,7 @@ Board specific configuration file specifications:
 	kwbimage.cfg.  The name can be set as part of the full path
 	to the file using CONFIG_SYS_KWD_CONFIG (probably in
 	include/configs/<yourboard>.h).   The path should look like:
-	$(SRCTREE)/$(CONFIG_BOARDDIR)/<yourkwbimagename>.cfg
+	$(CONFIG_BOARDDIR)/<yourkwbimagename>.cfg
 2. This file can have empty lines and lines starting with "#" as first
 	character to put comments
 3. This file can have configuration command lines as mentioned below,
diff --git a/doc/README.usb b/doc/README.usb
index 65fb2886d9..bc768a3854 100644
--- a/doc/README.usb
+++ b/doc/README.usb
@@ -127,8 +127,14 @@ To enable USB Host Ethernet in U-Boot, your platform must of course
 support USB with CONFIG_CMD_USB enabled and working. You will need to
 add some config settings to your board header file:
 
+#define CONFIG_CMD_USB		/* the 'usb' interactive command */
 #define CONFIG_USB_HOST_ETHER	/* Enable USB Ethernet adapters */
-#define CONFIG_USB_ETHER_ASIX	/* Asix, or whatever driver(s) you want */
+
+and one or more of the following for individual adapter hardware:
+
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_USB_ETHER_MCS7830
+#define CONFIG_USB_ETHER_SMSC95XX
 
 As with built-in networking, you will also want to enable some network
 commands, for example:
@@ -148,7 +154,10 @@ settings should start you off:
 
 You can also set the default IP address of your board and the server
 as well as the default file to load when a 'bootp' command is issued.
-All of these can be obtained from the bootp server if not set.
+However note that encoding these individual network settings into a
+common exectuable is discouraged, as it leads to potential conflicts,
+and all the parameters can either get stored in the board's external
+environment, or get obtained from the bootp server if not set.
 
 #define CONFIG_IPADDR		10.0.0.2  (replace with your value)
 #define CONFIG_SERVERIP		10.0.0.1  (replace with your value)
diff --git a/doc/device-tree-bindings/video/sandbox-fb.txt b/doc/device-tree-bindings/video/sandbox-fb.txt
new file mode 100644
index 0000000000..eb91b30e3f
--- /dev/null
+++ b/doc/device-tree-bindings/video/sandbox-fb.txt
@@ -0,0 +1,13 @@
+Sandbox LCD
+===========
+
+This uses the displaymode.txt binding except that only xres and yres are
+required properties.
+
+Example:
+
+	lcd {
+		compatible = "sandbox,lcd-sdl";
+		xres = <800>;
+		yres = <600>;
+	};