mips: Move cpu/mips/* to arch/mips/cpu/*

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

14 files changed, 0 insertions, 4305 deletions

diff --git a/cpu/mips/Makefile b/cpu/mips/Makefile
deleted file mode 100644
index 28a1cbb104..0000000000
--- a/cpu/mips/Makefile
+++ /dev/null
@@ -1,53 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(CPU).a
-
-START	= start.o
-SOBJS-y	= cache.o
-COBJS-y	= cpu.o interrupts.o
-
-SOBJS-$(CONFIG_INCA_IP)	+= incaip_wdt.o
-COBJS-$(CONFIG_INCA_IP)	+= asc_serial.o incaip_clock.o
-COBJS-$(CONFIG_PURPLE)	+= asc_serial.o
-COBJS-$(CONFIG_SOC_AU1X00) += au1x00_eth.o au1x00_serial.o au1x00_usb_ohci.o
-
-SRCS	:= $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
-START	:= $(addprefix $(obj),$(START))
-
-all:	$(obj).depend $(START) $(LIB)
-
-$(LIB):	$(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/cpu/mips/asc_serial.c b/cpu/mips/asc_serial.c
deleted file mode 100644
index be686c2ae8..0000000000
--- a/cpu/mips/asc_serial.c
+++ /dev/null
@@ -1,368 +0,0 @@
-/*
- * (INCA) ASC UART support
- */
-
-#include <config.h>
-
-#ifdef CONFIG_PURPLE
-#define	serial_init	asc_serial_init
-#define	serial_putc	asc_serial_putc
-#define	serial_puts	asc_serial_puts
-#define	serial_getc	asc_serial_getc
-#define	serial_tstc	asc_serial_tstc
-#define	serial_setbrg	asc_serial_setbrg
-#endif
-
-#include <common.h>
-#include <asm/inca-ip.h>
-#include "asc_serial.h"
-
-#ifdef CONFIG_PURPLE
-
-#undef ASC_FIFO_PRESENT
-#define TOUT_LOOP	100000
-
-/* Set base address for second FPI interrupt control register bank */
-#define SFPI_INTCON_BASEADDR	0xBF0F0000
-
-/* Register offset from base address */
-#define FBS_ISR		0x00000000	/* Interrupt status register */
-#define FBS_IMR		0x00000008	/* Interrupt mask register */
-#define FBS_IDIS	0x00000010	/* Interrupt disable register */
-
-/* Interrupt status register bits */
-#define FBS_ISR_AT	0x00000040	/* ASC transmit interrupt */
-#define FBS_ISR_AR	0x00000020	/* ASC receive interrupt */
-#define FBS_ISR_AE	0x00000010	/* ASC error interrupt */
-#define FBS_ISR_AB	0x00000008	/* ASC transmit buffer interrupt */
-#define FBS_ISR_AS      0x00000004	/* ASC start of autobaud detection interrupt */
-#define FBS_ISR_AF	0x00000002	/* ASC end of autobaud detection interrupt */
-
-#else
-
-#define ASC_FIFO_PRESENT
-
-#endif
-
-
-#define SET_BIT(reg, mask)                  reg |= (mask)
-#define CLEAR_BIT(reg, mask)                reg &= (~mask)
-#define CLEAR_BITS(reg, mask)               CLEAR_BIT(reg, mask)
-#define SET_BITS(reg, mask)                 SET_BIT(reg, mask)
-#define SET_BITFIELD(reg, mask, off, val)   {reg &= (~mask); reg |= (val << off);}
-
-extern uint incaip_get_fpiclk(void);
-
-static int serial_setopt (void);
-
-/* pointer to ASC register base address */
-static volatile incaAsc_t *pAsc = (incaAsc_t *)INCA_IP_ASC;
-
-/******************************************************************************
-*
-* serial_init - initialize a INCAASC channel
-*
-* This routine initializes the number of data bits, parity
-* and set the selected baud rate. Interrupts are disabled.
-* Set the modem control signals if the option is selected.
-*
-* RETURNS: N/A
-*/
-
-int serial_init (void)
-{
-#ifdef CONFIG_INCA_IP
-    /* we have to set PMU.EN13 bit to enable an ASC device*/
-    INCAASC_PMU_ENABLE(13);
-#endif
-
-    /* and we have to set CLC register*/
-    CLEAR_BIT(pAsc->asc_clc, ASCCLC_DISS);
-    SET_BITFIELD(pAsc->asc_clc, ASCCLC_RMCMASK, ASCCLC_RMCOFFSET, 0x0001);
-
-    /* initialy we are in async mode */
-    pAsc->asc_con = ASCCON_M_8ASYNC;
-
-    /* select input port */
-    pAsc->asc_pisel = (CONSOLE_TTY & 0x1);
-
-#ifdef ASC_FIFO_PRESENT
-    /* TXFIFO's filling level */
-    SET_BITFIELD(pAsc->asc_txfcon, ASCTXFCON_TXFITLMASK,
-		    ASCTXFCON_TXFITLOFF, INCAASC_TXFIFO_FL);
-    /* enable TXFIFO */
-    SET_BIT(pAsc->asc_txfcon, ASCTXFCON_TXFEN);
-
-    /* RXFIFO's filling level */
-    SET_BITFIELD(pAsc->asc_txfcon, ASCRXFCON_RXFITLMASK,
-		    ASCRXFCON_RXFITLOFF, INCAASC_RXFIFO_FL);
-    /* enable RXFIFO */
-    SET_BIT(pAsc->asc_rxfcon, ASCRXFCON_RXFEN);
-#endif
-
-    /* enable error signals */
-    SET_BIT(pAsc->asc_con, ASCCON_FEN);
-    SET_BIT(pAsc->asc_con, ASCCON_OEN);
-
-#ifdef CONFIG_INCA_IP
-    /* acknowledge ASC interrupts */
-    ASC_INTERRUPTS_CLEAR(INCAASC_IRQ_LINE_ALL);
-
-    /* disable ASC interrupts */
-    ASC_INTERRUPTS_DISABLE(INCAASC_IRQ_LINE_ALL);
-#endif
-
-#ifdef ASC_FIFO_PRESENT
-    /* set FIFOs into the transparent mode */
-    SET_BIT(pAsc->asc_txfcon, ASCTXFCON_TXTMEN);
-    SET_BIT(pAsc->asc_rxfcon, ASCRXFCON_RXTMEN);
-#endif
-
-    /* set baud rate */
-    serial_setbrg();
-
-    /* set the options */
-    serial_setopt();
-
-    return 0;
-}
-
-void serial_setbrg (void)
-{
-    ulong      uiReloadValue, fdv;
-    ulong      f_ASC;
-
-#ifdef CONFIG_INCA_IP
-    f_ASC = incaip_get_fpiclk();
-#else
-    f_ASC = ASC_CLOCK_RATE;
-#endif
-
-#ifndef INCAASC_USE_FDV
-    fdv = 2;
-    uiReloadValue = (f_ASC / (fdv * 16 * CONFIG_BAUDRATE)) - 1;
-#else
-    fdv = INCAASC_FDV_HIGH_BAUDRATE;
-    uiReloadValue = (f_ASC / (8192 * CONFIG_BAUDRATE / fdv)) - 1;
-#endif /* INCAASC_USE_FDV */
-
-    if ( (uiReloadValue < 0) || (uiReloadValue > 8191) )
-    {
-#ifndef INCAASC_USE_FDV
-	fdv = 3;
-	uiReloadValue = (f_ASC / (fdv * 16 * CONFIG_BAUDRATE)) - 1;
-#else
-	fdv = INCAASC_FDV_LOW_BAUDRATE;
-	uiReloadValue = (f_ASC / (8192 * CONFIG_BAUDRATE / fdv)) - 1;
-#endif /* INCAASC_USE_FDV */
-
-	if ( (uiReloadValue < 0) || (uiReloadValue > 8191) )
-	{
-	    return;    /* can't impossibly generate that baud rate */
-	}
-    }
-
-    /* Disable Baud Rate Generator; BG should only be written when R=0 */
-    CLEAR_BIT(pAsc->asc_con, ASCCON_R);
-
-#ifndef INCAASC_USE_FDV
-    /*
-     * Disable Fractional Divider (FDE)
-     * Divide clock by reload-value + constant (BRS)
-     */
-    /* FDE = 0 */
-    CLEAR_BIT(pAsc->asc_con, ASCCON_FDE);
-
-    if ( fdv == 2 )
-	CLEAR_BIT(pAsc->asc_con, ASCCON_BRS);   /* BRS = 0 */
-    else
-	SET_BIT(pAsc->asc_con, ASCCON_BRS); /* BRS = 1 */
-
-#else /* INCAASC_USE_FDV */
-
-    /* Enable Fractional Divider */
-    SET_BIT(pAsc->asc_con, ASCCON_FDE); /* FDE = 1 */
-
-    /* Set fractional divider value */
-    pAsc->asc_fdv = fdv & ASCFDV_VALUE_MASK;
-
-#endif /* INCAASC_USE_FDV */
-
-    /* Set reload value in BG */
-    pAsc->asc_bg = uiReloadValue;
-
-    /* Enable Baud Rate Generator */
-    SET_BIT(pAsc->asc_con, ASCCON_R);           /* R = 1 */
-}
-
-/*******************************************************************************
-*
-* serial_setopt - set the serial options
-*
-* Set the channel operating mode to that specified. Following options
-* are supported: CREAD, CSIZE, PARENB, and PARODD.
-*
-* Note, this routine disables the transmitter.  The calling routine
-* may have to re-enable it.
-*
-* RETURNS:
-* Returns 0 to indicate success, otherwise -1 is returned
-*/
-
-static int serial_setopt (void)
-{
-    ulong  con;
-
-    switch ( ASC_OPTIONS & ASCOPT_CSIZE )
-    {
-    /* 7-bit-data */
-    case ASCOPT_CS7:
-	con = ASCCON_M_7ASYNCPAR;   /* 7-bit-data and parity bit */
-	break;
-
-    /* 8-bit-data */
-    case ASCOPT_CS8:
-	if ( ASC_OPTIONS & ASCOPT_PARENB )
-	    con = ASCCON_M_8ASYNCPAR;   /* 8-bit-data and parity bit */
-	else
-	    con = ASCCON_M_8ASYNC;      /* 8-bit-data no parity */
-	break;
-
-    /*
-     *  only 7 and 8-bit frames are supported
-     *  if we don't use IOCTL extensions
-     */
-    default:
-	return -1;
-    }
-
-    if ( ASC_OPTIONS & ASCOPT_STOPB )
-	SET_BIT(con, ASCCON_STP);       /* 2 stop bits */
-    else
-	CLEAR_BIT(con, ASCCON_STP);     /* 1 stop bit */
-
-    if ( ASC_OPTIONS & ASCOPT_PARENB )
-	SET_BIT(con, ASCCON_PEN);           /* enable parity checking */
-    else
-	CLEAR_BIT(con, ASCCON_PEN);         /* disable parity checking */
-
-    if ( ASC_OPTIONS & ASCOPT_PARODD )
-	SET_BIT(con, ASCCON_ODD);       /* odd parity */
-    else
-	CLEAR_BIT(con, ASCCON_ODD);     /* even parity */
-
-    if ( ASC_OPTIONS & ASCOPT_CREAD )
-	SET_BIT(pAsc->asc_whbcon, ASCWHBCON_SETREN); /* Receiver enable */
-
-    pAsc->asc_con |= con;
-
-    return 0;
-}
-
-void serial_putc (const char c)
-{
-#ifdef ASC_FIFO_PRESENT
-    uint txFl = 0;
-#else
-    uint timeout = 0;
-#endif
-
-    if (c == '\n') serial_putc ('\r');
-
-#ifdef ASC_FIFO_PRESENT
-    /* check do we have a free space in the TX FIFO */
-    /* get current filling level */
-    do
-    {
-	txFl = ( pAsc->asc_fstat & ASCFSTAT_TXFFLMASK ) >> ASCFSTAT_TXFFLOFF;
-    }
-    while ( txFl == INCAASC_TXFIFO_FULL );
-#else
-
-    while(!(*(volatile unsigned long*)(SFPI_INTCON_BASEADDR + FBS_ISR) &
-			   FBS_ISR_AB))
-    {
-	    if (timeout++ > TOUT_LOOP)
-	    {
-		    break;
-	    }
-    }
-#endif
-
-    pAsc->asc_tbuf = c; /* write char to Transmit Buffer Register */
-
-#ifndef ASC_FIFO_PRESENT
-    *(volatile unsigned long*)(SFPI_INTCON_BASEADDR + FBS_ISR) = FBS_ISR_AB |
-								 FBS_ISR_AT;
-#endif
-
-    /* check for errors */
-    if ( pAsc->asc_con & ASCCON_OE )
-    {
-	SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLROE);
-	return;
-    }
-}
-
-void serial_puts (const char *s)
-{
-    while (*s)
-    {
-	serial_putc (*s++);
-    }
-}
-
-int serial_getc (void)
-{
-    ulong symbol_mask;
-    char c;
-
-    while (!serial_tstc());
-
-    symbol_mask =
-	((ASC_OPTIONS & ASCOPT_CSIZE) == ASCOPT_CS7) ? (0x7f) : (0xff);
-
-    c = (char)(pAsc->asc_rbuf & symbol_mask);
-
-#ifndef ASC_FIFO_PRESENT
-    *(volatile unsigned long*)(SFPI_INTCON_BASEADDR + FBS_ISR) = FBS_ISR_AR;
-#endif
-
-    return c;
-}
-
-int serial_tstc (void)
-{
-    int res = 1;
-
-#ifdef ASC_FIFO_PRESENT
-    if ( (pAsc->asc_fstat & ASCFSTAT_RXFFLMASK) == 0 )
-    {
-	res = 0;
-    }
-#else
-    if (!(*(volatile unsigned long*)(SFPI_INTCON_BASEADDR + FBS_ISR) &
-								FBS_ISR_AR))
-
-    {
-	res = 0;
-    }
-#endif
-    else if ( pAsc->asc_con & ASCCON_FE )
-    {
-	SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLRFE);
-	res = 0;
-    }
-    else if ( pAsc->asc_con & ASCCON_PE )
-    {
-	SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLRPE);
-	res = 0;
-    }
-    else if ( pAsc->asc_con & ASCCON_OE )
-    {
-	SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLROE);
-	res = 0;
-    }
-
-    return res;
-}
diff --git a/cpu/mips/asc_serial.h b/cpu/mips/asc_serial.h
deleted file mode 100644
index 7ffdcfaf8b..0000000000
--- a/cpu/mips/asc_serial.h
+++ /dev/null
@@ -1,177 +0,0 @@
-/* incaAscSio.h - (INCA) ASC UART tty driver header */
-
-#ifndef __INCincaAscSioh
-#define __INCincaAscSioh
-
-#include <asm/inca-ip.h>
-
-/* channel operating modes */
-#define	ASCOPT_CSIZE	0x00000003
-#define	ASCOPT_CS7	0x00000001
-#define	ASCOPT_CS8	0x00000002
-#define	ASCOPT_PARENB	0x00000004
-#define	ASCOPT_STOPB	0x00000008
-#define	ASCOPT_PARODD	0x00000010
-#define	ASCOPT_CREAD	0x00000020
-
-#define ASC_OPTIONS		(ASCOPT_CREAD | ASCOPT_CS8)
-
-/* ASC input select (0 or 1) */
-#define CONSOLE_TTY	0
-
-/* use fractional divider for baudrate settings */
-#define INCAASC_USE_FDV
-
-#ifdef INCAASC_USE_FDV
-   #define INCAASC_FDV_LOW_BAUDRATE        71
-   #define INCAASC_FDV_HIGH_BAUDRATE       453
-#endif /*INCAASC_USE_FDV*/
-
-
-#define INCAASC_TXFIFO_FL       1
-#define INCAASC_RXFIFO_FL       1
-#define INCAASC_TXFIFO_FULL     16
-
-/* interrupt lines masks for the ASC device interrupts*/
-/* change these macroses if it's necessary */
-#define INCAASC_IRQ_LINE_ALL        0x000F0000  /* all IRQs */
-
-#define INCAASC_IRQ_LINE_TIR            0x00010000      /* TIR - Tx */
-#define INCAASC_IRQ_LINE_RIR            0x00020000      /* RIR - Rx */
-#define INCAASC_IRQ_LINE_EIR            0x00040000      /* EIR - Err */
-#define INCAASC_IRQ_LINE_TBIR           0x00080000      /* TBIR - Tx Buf*/
-
-/* interrupt controller access macros */
-#define ASC_INTERRUPTS_ENABLE(X)  \
-   *((volatile unsigned int*) INCA_IP_ICU_IM2_IER) |= X;
-#define ASC_INTERRUPTS_DISABLE(X) \
-   *((volatile unsigned int*) INCA_IP_ICU_IM2_IER) &= ~X;
-#define ASC_INTERRUPTS_CLEAR(X)   \
-   *((volatile unsigned int*) INCA_IP_ICU_IM2_ISR) = X;
-
-/* CLC register's bits and bitfields */
-#define ASCCLC_DISR        0x00000001
-#define ASCCLC_DISS        0x00000002
-#define ASCCLC_RMCMASK     0x0000FF00
-#define ASCCLC_RMCOFFSET   8
-
-/* CON register's bits and bitfields */
-#define ASCCON_MODEMASK 0x0007
-    #define ASCCON_M_8SYNC          0x0
-    #define ASCCON_M_8ASYNC         0x1
-    #define ASCCON_M_8IRDAASYNC     0x2
-    #define ASCCON_M_7ASYNCPAR      0x3
-    #define ASCCON_M_9ASYNC         0x4
-    #define ASCCON_M_8WAKEUPASYNC   0x5
-    #define ASCCON_M_8ASYNCPAR      0x7
-#define ASCCON_STP      0x0008
-#define ASCCON_REN      0x0010
-#define ASCCON_PEN      0x0020
-#define ASCCON_FEN      0x0040
-#define ASCCON_OEN      0x0080
-#define ASCCON_PE       0x0100
-#define ASCCON_FE       0x0200
-#define ASCCON_OE       0x0400
-#define ASCCON_FDE      0x0800
-#define ASCCON_ODD      0x1000
-#define ASCCON_BRS      0x2000
-#define ASCCON_LB       0x4000
-#define ASCCON_R        0x8000
-
-/* WHBCON register's bits and bitfields */
-#define ASCWHBCON_CLRREN    0x0010
-#define ASCWHBCON_SETREN    0x0020
-#define ASCWHBCON_CLRPE     0x0100
-#define ASCWHBCON_CLRFE     0x0200
-#define ASCWHBCON_CLROE     0x0400
-#define ASCWHBCON_SETPE     0x0800
-#define ASCWHBCON_SETFE     0x1000
-#define ASCWHBCON_SETOE     0x2000
-
-/* ABCON register's bits and bitfields */
-#define ASCABCON_ABEN       0x0001
-#define ASCABCON_AUREN      0x0002
-#define ASCABCON_ABSTEN     0x0004
-#define ASCABCON_ABDETEN    0x0008
-#define ASCABCON_FCDETEN    0x0010
-#define ASCABCON_EMMASK     0x0300
-    #define ASCABCON_EMOFF          8
-	#define ASCABCON_EM_DISAB       0x0
-	#define ASCABCON_EM_DURAB       0x1
-	#define ASCABCON_EM_ALWAYS      0x2
-#define ASCABCON_TXINV      0x0400
-#define ASCABCON_RXINV      0x0800
-
-/* FDV register mask, offset and bitfields*/
-#define ASCFDV_VALUE_MASK     0x000001FF
-
-/* WHBABCON register's bits and bitfields */
-#define ASCWHBABCON_SETABEN     0x0001
-#define ASCWHBABCON_CLRABEN     0x0002
-
-/* ABSTAT register's bits and bitfields */
-#define ASCABSTAT_FCSDET    0x0001
-#define ASCABSTAT_FCCDET    0x0002
-#define ASCABSTAT_SCSDET    0x0004
-#define ASCABSTAT_SCCDET    0x0008
-#define ASCABSTAT_DETWAIT   0x0010
-
-/* WHBABSTAT register's bits and bitfields */
-#define ASCWHBABSTAT_CLRFCSDET  0x0001
-#define ASCWHBABSTAT_SETFCSDET  0x0002
-#define ASCWHBABSTAT_CLRFCCDET  0x0004
-#define ASCWHBABSTAT_SETFCCDET  0x0008
-#define ASCWHBABSTAT_CLRSCSDET  0x0010
-#define ASCWHBABSTAT_SETSCSDET  0x0020
-#define ASCWHBABSTAT_SETSCCDET  0x0040
-#define ASCWHBABSTAT_CLRSCCDET  0x0080
-#define ASCWHBABSTAT_CLRDETWAIT 0x0100
-#define ASCWHBABSTAT_SETDETWAIT 0x0200
-
-/* TXFCON register's bits and bitfields */
-#define ASCTXFCON_TXFEN         0x0001
-#define ASCTXFCON_TXFFLU        0x0002
-#define ASCTXFCON_TXTMEN        0x0004
-#define ASCTXFCON_TXFITLMASK    0x3F00
-#define ASCTXFCON_TXFITLOFF     8
-
-/* RXFCON register's bits and bitfields */
-#define ASCRXFCON_RXFEN         0x0001
-#define ASCRXFCON_RXFFLU        0x0002
-#define ASCRXFCON_RXTMEN        0x0004
-#define ASCRXFCON_RXFITLMASK    0x3F00
-#define ASCRXFCON_RXFITLOFF     8
-
-/* FSTAT register's bits and bitfields */
-#define ASCFSTAT_RXFFLMASK      0x003F
-#define ASCFSTAT_TXFFLMASK      0x3F00
-#define ASCFSTAT_TXFFLOFF       8
-
-#define INCAASC_PMU_ENABLE(BIT) *((volatile ulong*)0xBF102000) |= (0x1 << BIT);
-
-typedef  struct         /* incaAsc_t */
-{
-    volatile unsigned long  asc_clc;                            /*0x0000*/
-    volatile unsigned long  asc_pisel;                          /*0x0004*/
-    volatile unsigned long  asc_rsvd1[2];   /* for mapping */   /*0x0008*/
-    volatile unsigned long  asc_con;                            /*0x0010*/
-    volatile unsigned long  asc_bg;                             /*0x0014*/
-    volatile unsigned long  asc_fdv;                            /*0x0018*/
-    volatile unsigned long  asc_pmw;        /* not used */      /*0x001C*/
-    volatile unsigned long  asc_tbuf;                           /*0x0020*/
-    volatile unsigned long  asc_rbuf;                           /*0x0024*/
-    volatile unsigned long  asc_rsvd2[2];   /* for mapping */   /*0x0028*/
-    volatile unsigned long  asc_abcon;                          /*0x0030*/
-    volatile unsigned long  asc_abstat;     /* not used */      /*0x0034*/
-    volatile unsigned long  asc_rsvd3[2];   /* for mapping */   /*0x0038*/
-    volatile unsigned long  asc_rxfcon;                         /*0x0040*/
-    volatile unsigned long  asc_txfcon;                         /*0x0044*/
-    volatile unsigned long  asc_fstat;                          /*0x0048*/
-    volatile unsigned long  asc_rsvd4;      /* for mapping */   /*0x004C*/
-    volatile unsigned long  asc_whbcon;                         /*0x0050*/
-    volatile unsigned long  asc_whbabcon;                       /*0x0054*/
-    volatile unsigned long  asc_whbabstat;  /* not used */      /*0x0058*/
-
-} incaAsc_t;
-
-#endif /* __INCincaAscSioh */
diff --git a/cpu/mips/au1x00_eth.c b/cpu/mips/au1x00_eth.c
deleted file mode 100644
index 5074997a29..0000000000
--- a/cpu/mips/au1x00_eth.c
+++ /dev/null
@@ -1,311 +0,0 @@
-/* Only eth0 supported for now
- *
- * (C) Copyright 2003
- * Thomas.Lange@corelatus.se
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <config.h>
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-#error "PHY not supported yet"
-/* We just assume that we are running 100FD for now */
-/* We all use switches, right? ;-) */
-#endif
-
-/* I assume ethernet behaves like au1000 */
-
-#ifdef CONFIG_SOC_AU1000
-/* Base address differ between cpu:s */
-#define ETH0_BASE AU1000_ETH0_BASE
-#define MAC0_ENABLE AU1000_MAC0_ENABLE
-#else
-#ifdef CONFIG_SOC_AU1100
-#define ETH0_BASE AU1100_ETH0_BASE
-#define MAC0_ENABLE AU1100_MAC0_ENABLE
-#else
-#ifdef CONFIG_SOC_AU1500
-#define ETH0_BASE AU1500_ETH0_BASE
-#define MAC0_ENABLE AU1500_MAC0_ENABLE
-#else
-#ifdef CONFIG_SOC_AU1550
-#define ETH0_BASE AU1550_ETH0_BASE
-#define MAC0_ENABLE AU1550_MAC0_ENABLE
-#else
-#error "No valid cpu set"
-#endif
-#endif
-#endif
-#endif
-
-#include <common.h>
-#include <malloc.h>
-#include <net.h>
-#include <command.h>
-#include <asm/io.h>
-#include <asm/au1x00.h>
-
-#if defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-#endif
-
-/* Ethernet Transmit and Receive Buffers */
-#define DBUF_LENGTH  1520
-#define PKT_MAXBUF_SIZE		1518
-
-static char txbuf[DBUF_LENGTH];
-
-static int next_tx;
-static int next_rx;
-
-/* 4 rx and 4 tx fifos */
-#define NO_OF_FIFOS 4
-
-typedef struct{
-	u32 status;
-	u32 addr;
-	u32 len; /* Only used for tx */
-	u32 not_used;
-} mac_fifo_t;
-
-mac_fifo_t mac_fifo[NO_OF_FIFOS];
-
-#define MAX_WAIT 1000
-
-#if defined(CONFIG_CMD_MII)
-int  au1x00_miiphy_read(char *devname, unsigned char addr,
-		unsigned char reg, unsigned short * value)
-{
-	volatile u32 *mii_control_reg = (volatile u32*)(ETH0_BASE+MAC_MII_CNTRL);
-	volatile u32 *mii_data_reg = (volatile u32*)(ETH0_BASE+MAC_MII_DATA);
-	u32 mii_control;
-	unsigned int timedout = 20;
-
-	while (*mii_control_reg & MAC_MII_BUSY) {
-		udelay(1000);
-		if (--timedout == 0) {
-			printf("au1x00_eth: miiphy_read busy timeout!!\n");
-			return -1;
-		}
-	}
-
-	mii_control = MAC_SET_MII_SELECT_REG(reg) |
-		MAC_SET_MII_SELECT_PHY(addr) | MAC_MII_READ;
-
-	*mii_control_reg = mii_control;
-
-	timedout = 20;
-	while (*mii_control_reg & MAC_MII_BUSY) {
-		udelay(1000);
-		if (--timedout == 0) {
-			printf("au1x00_eth: miiphy_read busy timeout!!\n");
-			return -1;
-		}
-	}
-	*value = *mii_data_reg;
-	return 0;
-}
-
-int  au1x00_miiphy_write(char *devname, unsigned char addr,
-		unsigned char reg, unsigned short value)
-{
-	volatile u32 *mii_control_reg = (volatile u32*)(ETH0_BASE+MAC_MII_CNTRL);
-	volatile u32 *mii_data_reg = (volatile u32*)(ETH0_BASE+MAC_MII_DATA);
-	u32 mii_control;
-	unsigned int timedout = 20;
-
-	while (*mii_control_reg & MAC_MII_BUSY) {
-		udelay(1000);
-		if (--timedout == 0) {
-			printf("au1x00_eth: miiphy_write busy timeout!!\n");
-			return -1;
-		}
-	}
-
-	mii_control = MAC_SET_MII_SELECT_REG(reg) |
-		MAC_SET_MII_SELECT_PHY(addr) | MAC_MII_WRITE;
-
-	*mii_data_reg = value;
-	*mii_control_reg = mii_control;
-	return 0;
-}
-#endif
-
-static int au1x00_send(struct eth_device* dev, volatile void *packet, int length){
-	volatile mac_fifo_t *fifo_tx =
-		(volatile mac_fifo_t*)(MAC0_TX_DMA_ADDR+MAC_TX_BUFF0_STATUS);
-	int i;
-	int res;
-
-	/* tx fifo should always be idle */
-	fifo_tx[next_tx].len = length;
-	fifo_tx[next_tx].addr = (virt_to_phys(packet))|TX_DMA_ENABLE;
-	au_sync();
-
-	udelay(1);
-	i=0;
-	while(!(fifo_tx[next_tx].addr&TX_T_DONE)){
-		if(i>MAX_WAIT){
-			printf("TX timeout\n");
-			break;
-		}
-		udelay(1);
-		i++;
-	}
-
-	/* Clear done bit */
-	fifo_tx[next_tx].addr = 0;
-	fifo_tx[next_tx].len = 0;
-	au_sync();
-
-	res = fifo_tx[next_tx].status;
-
-	next_tx++;
-	if(next_tx>=NO_OF_FIFOS){
-		next_tx=0;
-	}
-	return(res);
-}
-
-static int au1x00_recv(struct eth_device* dev){
-	volatile mac_fifo_t *fifo_rx =
-		(volatile mac_fifo_t*)(MAC0_RX_DMA_ADDR+MAC_RX_BUFF0_STATUS);
-
-	int length;
-	u32 status;
-
-	for(;;){
-		if(!(fifo_rx[next_rx].addr&RX_T_DONE)){
-			/* Nothing has been received */
-			return(-1);
-		}
-
-		status = fifo_rx[next_rx].status;
-
-		length = status&0x3FFF;
-
-		if(status&RX_ERROR){
-			printf("Rx error 0x%x\n", status);
-		}
-		else{
-			/* Pass the packet up to the protocol layers. */
-			NetReceive(NetRxPackets[next_rx], length - 4);
-		}
-
-		fifo_rx[next_rx].addr = (virt_to_phys(NetRxPackets[next_rx]))|RX_DMA_ENABLE;
-
-		next_rx++;
-		if(next_rx>=NO_OF_FIFOS){
-			next_rx=0;
-		}
-	} /* for */
-
-	return(0); /* Does anyone use this? */
-}
-
-static int au1x00_init(struct eth_device* dev, bd_t * bd){
-
-	volatile u32 *macen = (volatile u32*)MAC0_ENABLE;
-	volatile u32 *mac_ctrl = (volatile u32*)(ETH0_BASE+MAC_CONTROL);
-	volatile u32 *mac_addr_high = (volatile u32*)(ETH0_BASE+MAC_ADDRESS_HIGH);
-	volatile u32 *mac_addr_low = (volatile u32*)(ETH0_BASE+MAC_ADDRESS_LOW);
-	volatile u32 *mac_mcast_high = (volatile u32*)(ETH0_BASE+MAC_MCAST_HIGH);
-	volatile u32 *mac_mcast_low = (volatile u32*)(ETH0_BASE+MAC_MCAST_LOW);
-	volatile mac_fifo_t *fifo_tx =
-		(volatile mac_fifo_t*)(MAC0_TX_DMA_ADDR+MAC_TX_BUFF0_STATUS);
-	volatile mac_fifo_t *fifo_rx =
-		(volatile mac_fifo_t*)(MAC0_RX_DMA_ADDR+MAC_RX_BUFF0_STATUS);
-	int i;
-
-	next_tx = TX_GET_DMA_BUFFER(fifo_tx[0].addr);
-	next_rx = RX_GET_DMA_BUFFER(fifo_rx[0].addr);
-
-	/* We have to enable clocks before releasing reset */
-	*macen = MAC_EN_CLOCK_ENABLE;
-	udelay(10);
-
-	/* Enable MAC0 */
-	/* We have to release reset before accessing registers */
-	*macen = MAC_EN_CLOCK_ENABLE|MAC_EN_RESET0|
-		MAC_EN_RESET1|MAC_EN_RESET2;
-	udelay(10);
-
-	for(i=0;i<NO_OF_FIFOS;i++){
-		fifo_tx[i].len = 0;
-		fifo_tx[i].addr = virt_to_phys(&txbuf[0]);
-		fifo_rx[i].addr = (virt_to_phys(NetRxPackets[i]))|RX_DMA_ENABLE;
-	}
-
-	/* Put mac addr in little endian */
-#define ea eth_get_dev()->enetaddr
-	*mac_addr_high	=	(ea[5] <<  8) | (ea[4]	    ) ;
-	*mac_addr_low	=	(ea[3] << 24) | (ea[2] << 16) |
-		(ea[1] <<  8) | (ea[0]	    ) ;
-#undef ea
-	*mac_mcast_low = 0;
-	*mac_mcast_high = 0;
-
-	/* Make sure the MAC buffer is in the correct endian mode */
-#ifdef __LITTLE_ENDIAN
-	*mac_ctrl = MAC_FULL_DUPLEX;
-	udelay(1);
-	*mac_ctrl = MAC_FULL_DUPLEX|MAC_RX_ENABLE|MAC_TX_ENABLE;
-#else
-	*mac_ctrl = MAC_BIG_ENDIAN|MAC_FULL_DUPLEX;
-	udelay(1);
-	*mac_ctrl = MAC_BIG_ENDIAN|MAC_FULL_DUPLEX|MAC_RX_ENABLE|MAC_TX_ENABLE;
-#endif
-
-	return(1);
-}
-
-static void au1x00_halt(struct eth_device* dev){
-	volatile u32 *macen = (volatile u32*)MAC0_ENABLE;
-
-	/* Put MAC0 in reset */
-	*macen = 0;
-}
-
-int au1x00_enet_initialize(bd_t *bis){
-	struct eth_device* dev;
-
-	if ((dev = (struct eth_device*)malloc(sizeof *dev)) == NULL) {
-		puts ("malloc failed\n");
-		return -1;
-	}
-
-	memset(dev, 0, sizeof *dev);
-
-	sprintf(dev->name, "Au1X00 ethernet");
-	dev->iobase = 0;
-	dev->priv   = 0;
-	dev->init   = au1x00_init;
-	dev->halt   = au1x00_halt;
-	dev->send   = au1x00_send;
-	dev->recv   = au1x00_recv;
-
-	eth_register(dev);
-
-#if defined(CONFIG_CMD_MII)
-	miiphy_register(dev->name,
-		au1x00_miiphy_read, au1x00_miiphy_write);
-#endif
-
-	return 1;
-}
diff --git a/cpu/mips/au1x00_serial.c b/cpu/mips/au1x00_serial.c
deleted file mode 100644
index c25ba5a5b3..0000000000
--- a/cpu/mips/au1x00_serial.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * AU1X00 UART support
- *
- * Hardcoded to UART 0 for now
- * Speed and options also hardcoded to 115200 8N1
- *
- *  Copyright (c) 2003	Thomas.Lange@corelatus.se
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-#include <asm/au1x00.h>
-
-/******************************************************************************
-*
-* serial_init - initialize a channel
-*
-* This routine initializes the number of data bits, parity
-* and set the selected baud rate. Interrupts are disabled.
-* Set the modem control signals if the option is selected.
-*
-* RETURNS: N/A
-*/
-
-int serial_init (void)
-{
-	volatile u32 *uart_fifoctl = (volatile u32*)(UART0_ADDR+UART_FCR);
-	volatile u32 *uart_enable = (volatile u32*)(UART0_ADDR+UART_ENABLE);
-
-	/* Enable clocks first */
-	*uart_enable = UART_EN_CE;
-
-	/* Then release reset */
-	/* Must release reset before setting other regs */
-	*uart_enable = UART_EN_CE|UART_EN_E;
-
-	/* Activate fifos, reset tx and rx */
-	/* Set tx trigger level to 12 */
-	*uart_fifoctl = UART_FCR_ENABLE_FIFO|UART_FCR_CLEAR_RCVR|
-		UART_FCR_CLEAR_XMIT|UART_FCR_T_TRIGGER_12;
-
-	serial_setbrg();
-
-	return 0;
-}
-
-
-void serial_setbrg (void)
-{
-	volatile u32 *uart_clk = (volatile u32*)(UART0_ADDR+UART_CLK);
-	volatile u32 *uart_lcr = (volatile u32*)(UART0_ADDR+UART_LCR);
-	volatile u32 *sys_powerctrl = (u32 *)SYS_POWERCTRL;
-	int sd;
-	int divisorx2;
-
-	/* sd is system clock divisor			*/
-	/* see section 10.4.5 in au1550 datasheet	*/
-	sd = (*sys_powerctrl & 0x03) + 2;
-
-	/* calulate 2x baudrate and round */
-	divisorx2 = ((CONFIG_SYS_MIPS_TIMER_FREQ/(sd * 16 * CONFIG_BAUDRATE)));
-
-	if (divisorx2 & 0x01)
-		divisorx2 = divisorx2 + 1;
-
-	*uart_clk = divisorx2 / 2;
-
-	/* Set parity, stop bits and word length to 8N1 */
-	*uart_lcr = UART_LCR_WLEN8;
-}
-
-void serial_putc (const char c)
-{
-	volatile u32 *uart_lsr = (volatile u32*)(UART0_ADDR+UART_LSR);
-	volatile u32 *uart_tx = (volatile u32*)(UART0_ADDR+UART_TX);
-
-	if (c == '\n') serial_putc ('\r');
-
-	/* Wait for fifo to shift out some bytes */
-	while((*uart_lsr&UART_LSR_THRE)==0);
-
-	*uart_tx = (u32)c;
-}
-
-void serial_puts (const char *s)
-{
-	while (*s)
-	{
-		serial_putc (*s++);
-	}
-}
-
-int serial_getc (void)
-{
-	volatile u32 *uart_rx = (volatile u32*)(UART0_ADDR+UART_RX);
-	char c;
-
-	while (!serial_tstc());
-
-	c = (*uart_rx&0xFF);
-	return c;
-}
-
-int serial_tstc (void)
-{
-	volatile u32 *uart_lsr = (volatile u32*)(UART0_ADDR+UART_LSR);
-
-	if(*uart_lsr&UART_LSR_DR){
-		/* Data in rfifo */
-		return(1);
-	}
-	return 0;
-}
diff --git a/cpu/mips/au1x00_usb_ohci.c b/cpu/mips/au1x00_usb_ohci.c
deleted file mode 100644
index 0bc2305d87..0000000000
--- a/cpu/mips/au1x00_usb_ohci.c
+++ /dev/null
@@ -1,1726 +0,0 @@
-/*
- * URB OHCI HCD (Host Controller Driver) for USB on the AU1x00.
- *
- * (C) Copyright 2003
- * Gary Jennejohn, DENX Software Engineering <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Note: Part of this code has been derived from linux
- *
- */
-/*
- * IMPORTANT NOTES
- * 1 - this driver is intended for use with USB Mass Storage Devices
- *     (BBB) ONLY. There is NO support for Interrupt or Isochronous pipes!
- */
-
-#include <config.h>
-
-#ifdef CONFIG_USB_OHCI
-
-/* #include <pci.h> no PCI on the AU1x00 */
-
-#include <common.h>
-#include <malloc.h>
-#include <asm/io.h>
-#include <asm/au1x00.h>
-#include <usb.h>
-#include "au1x00_usb_ohci.h"
-
-#define OHCI_USE_NPS		/* force NoPowerSwitching mode */
-#define OHCI_VERBOSE_DEBUG	/* not always helpful */
-#define OHCI_FILL_TRACE
-
-#define USBH_ENABLE_BE (1<<0)
-#define USBH_ENABLE_C  (1<<1)
-#define USBH_ENABLE_E  (1<<2)
-#define USBH_ENABLE_CE (1<<3)
-#define USBH_ENABLE_RD (1<<4)
-
-#ifdef __LITTLE_ENDIAN
-#define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C)
-#else
-#define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C | USBH_ENABLE_BE)
-#endif
-
-
-/* For initializing controller (mask in an HCFS mode too) */
-#define OHCI_CONTROL_INIT \
-	(OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
-
-#undef readl
-#undef writel
-
-#define readl(a)     au_readl((long)(a))
-#define writel(v,a)  au_writel((v),(int)(a))
-
-#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
-
-#define DEBUG
-#ifdef DEBUG
-#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
-#else
-#define dbg(format, arg...) do {} while(0)
-#endif /* DEBUG */
-#define err(format, arg...) printf("ERROR: " format "\n", ## arg)
-#define SHOW_INFO
-#ifdef SHOW_INFO
-#define info(format, arg...) printf("INFO: " format "\n", ## arg)
-#else
-#define info(format, arg...) do {} while(0)
-#endif
-
-#define m16_swap(x) swap_16(x)
-#define m32_swap(x) swap_32(x)
-
-/* global ohci_t */
-static ohci_t gohci;
-/* this must be aligned to a 256 byte boundary */
-struct ohci_hcca ghcca[1];
-/* a pointer to the aligned storage */
-struct ohci_hcca *phcca;
-/* this allocates EDs for all possible endpoints */
-struct ohci_device ohci_dev;
-/* urb_priv */
-urb_priv_t urb_priv;
-/* RHSC flag */
-int got_rhsc;
-/* device which was disconnected */
-struct usb_device *devgone;
-
-/*-------------------------------------------------------------------------*/
-
-/* AMD-756 (D2 rev) reports corrupt register contents in some cases.
- * The erratum (#4) description is incorrect.  AMD's workaround waits
- * till some bits (mostly reserved) are clear; ok for all revs.
- */
-#define OHCI_QUIRK_AMD756 0xabcd
-#define read_roothub(hc, register, mask) ({ \
-	u32 temp = readl (&hc->regs->roothub.register); \
-	if (hc->flags & OHCI_QUIRK_AMD756) \
-		while (temp & mask) \
-			temp = readl (&hc->regs->roothub.register); \
-	temp; })
-
-static u32 roothub_a (struct ohci *hc)
-	{ return read_roothub (hc, a, 0xfc0fe000); }
-static inline u32 roothub_b (struct ohci *hc)
-	{ return readl (&hc->regs->roothub.b); }
-static inline u32 roothub_status (struct ohci *hc)
-	{ return readl (&hc->regs->roothub.status); }
-static u32 roothub_portstatus (struct ohci *hc, int i)
-	{ return read_roothub (hc, portstatus [i], 0xffe0fce0); }
-
-
-/* forward declaration */
-static int hc_interrupt (void);
-static void
-td_submit_job (struct usb_device * dev, unsigned long pipe, void * buffer,
-	int transfer_len, struct devrequest * setup, urb_priv_t * urb, int interval);
-
-/*-------------------------------------------------------------------------*
- * URB support functions
- *-------------------------------------------------------------------------*/
-
-/* free HCD-private data associated with this URB */
-
-static void urb_free_priv (urb_priv_t * urb)
-{
-	int		i;
-	int		last;
-	struct td	* td;
-
-	last = urb->length - 1;
-	if (last >= 0) {
-		for (i = 0; i <= last; i++) {
-			td = urb->td[i];
-			if (td) {
-				td->usb_dev = NULL;
-				urb->td[i] = NULL;
-			}
-		}
-	}
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef DEBUG
-static int sohci_get_current_frame_number (struct usb_device * dev);
-
-/* debug| print the main components of an URB
- * small: 0) header + data packets 1) just header */
-
-static void pkt_print (struct usb_device * dev, unsigned long pipe, void * buffer,
-	int transfer_len, struct devrequest * setup, char * str, int small)
-{
-	urb_priv_t * purb = &urb_priv;
-
-	dbg("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d/%d stat:%#lx",
-			str,
-			sohci_get_current_frame_number (dev),
-			usb_pipedevice (pipe),
-			usb_pipeendpoint (pipe),
-			usb_pipeout (pipe)? 'O': 'I',
-			usb_pipetype (pipe) < 2? (usb_pipeint (pipe)? "INTR": "ISOC"):
-				(usb_pipecontrol (pipe)? "CTRL": "BULK"),
-			purb->actual_length,
-			transfer_len, dev->status);
-#ifdef	OHCI_VERBOSE_DEBUG
-	if (!small) {
-		int i, len;
-
-		if (usb_pipecontrol (pipe)) {
-			printf (__FILE__ ": cmd(8):");
-			for (i = 0; i < 8 ; i++)
-				printf (" %02x", ((__u8 *) setup) [i]);
-			printf ("\n");
-		}
-		if (transfer_len > 0 && buffer) {
-			printf (__FILE__ ": data(%d/%d):",
-				purb->actual_length,
-				transfer_len);
-			len = usb_pipeout (pipe)?
-					transfer_len: purb->actual_length;
-			for (i = 0; i < 16 && i < len; i++)
-				printf (" %02x", ((__u8 *) buffer) [i]);
-			printf ("%s\n", i < len? "...": "");
-		}
-	}
-#endif
-}
-
-/* just for debugging; prints non-empty branches of the int ed tree inclusive iso eds*/
-void ep_print_int_eds (ohci_t *ohci, char * str) {
-	int i, j;
-	 __u32 * ed_p;
-	for (i= 0; i < 32; i++) {
-		j = 5;
-		ed_p = &(ohci->hcca->int_table [i]);
-		if (*ed_p == 0)
-		    continue;
-		printf (__FILE__ ": %s branch int %2d(%2x):", str, i, i);
-		while (*ed_p != 0 && j--) {
-			ed_t *ed = (ed_t *)m32_swap(ed_p);
-			printf (" ed: %4x;", ed->hwINFO);
-			ed_p = &ed->hwNextED;
-		}
-		printf ("\n");
-	}
-}
-
-static void ohci_dump_intr_mask (char *label, __u32 mask)
-{
-	dbg ("%s: 0x%08x%s%s%s%s%s%s%s%s%s",
-		label,
-		mask,
-		(mask & OHCI_INTR_MIE) ? " MIE" : "",
-		(mask & OHCI_INTR_OC) ? " OC" : "",
-		(mask & OHCI_INTR_RHSC) ? " RHSC" : "",
-		(mask & OHCI_INTR_FNO) ? " FNO" : "",
-		(mask & OHCI_INTR_UE) ? " UE" : "",
-		(mask & OHCI_INTR_RD) ? " RD" : "",
-		(mask & OHCI_INTR_SF) ? " SF" : "",
-		(mask & OHCI_INTR_WDH) ? " WDH" : "",
-		(mask & OHCI_INTR_SO) ? " SO" : ""
-		);
-}
-
-static void maybe_print_eds (char *label, __u32 value)
-{
-	ed_t *edp = (ed_t *)value;
-
-	if (value) {
-		dbg ("%s %08x", label, value);
-		dbg ("%08x", edp->hwINFO);
-		dbg ("%08x", edp->hwTailP);
-		dbg ("%08x", edp->hwHeadP);
-		dbg ("%08x", edp->hwNextED);
-	}
-}
-
-static char * hcfs2string (int state)
-{
-	switch (state) {
-		case OHCI_USB_RESET:	return "reset";
-		case OHCI_USB_RESUME:	return "resume";
-		case OHCI_USB_OPER:	return "operational";
-		case OHCI_USB_SUSPEND:	return "suspend";
-	}
-	return "?";
-}
-
-/* dump control and status registers */
-static void ohci_dump_status (ohci_t *controller)
-{
-	struct ohci_regs	*regs = controller->regs;
-	__u32			temp;
-
-	temp = readl (&regs->revision) & 0xff;
-	if (temp != 0x10)
-		dbg ("spec %d.%d", (temp >> 4), (temp & 0x0f));
-
-	temp = readl (&regs->control);
-	dbg ("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp,
-		(temp & OHCI_CTRL_RWE) ? " RWE" : "",
-		(temp & OHCI_CTRL_RWC) ? " RWC" : "",
-		(temp & OHCI_CTRL_IR) ? " IR" : "",
-		hcfs2string (temp & OHCI_CTRL_HCFS),
-		(temp & OHCI_CTRL_BLE) ? " BLE" : "",
-		(temp & OHCI_CTRL_CLE) ? " CLE" : "",
-		(temp & OHCI_CTRL_IE) ? " IE" : "",
-		(temp & OHCI_CTRL_PLE) ? " PLE" : "",
-		temp & OHCI_CTRL_CBSR
-		);
-
-	temp = readl (&regs->cmdstatus);
-	dbg ("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp,
-		(temp & OHCI_SOC) >> 16,
-		(temp & OHCI_OCR) ? " OCR" : "",
-		(temp & OHCI_BLF) ? " BLF" : "",
-		(temp & OHCI_CLF) ? " CLF" : "",
-		(temp & OHCI_HCR) ? " HCR" : ""
-		);
-
-	ohci_dump_intr_mask ("intrstatus", readl (&regs->intrstatus));
-	ohci_dump_intr_mask ("intrenable", readl (&regs->intrenable));
-
-	maybe_print_eds ("ed_periodcurrent", readl (&regs->ed_periodcurrent));
-
-	maybe_print_eds ("ed_controlhead", readl (&regs->ed_controlhead));
-	maybe_print_eds ("ed_controlcurrent", readl (&regs->ed_controlcurrent));
-
-	maybe_print_eds ("ed_bulkhead", readl (&regs->ed_bulkhead));
-	maybe_print_eds ("ed_bulkcurrent", readl (&regs->ed_bulkcurrent));
-
-	maybe_print_eds ("donehead", readl (&regs->donehead));
-}
-
-static void ohci_dump_roothub (ohci_t *controller, int verbose)
-{
-	__u32			temp, ndp, i;
-
-	temp = roothub_a (controller);
-	ndp = (temp & RH_A_NDP);
-
-	if (verbose) {
-		dbg ("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp,
-			((temp & RH_A_POTPGT) >> 24) & 0xff,
-			(temp & RH_A_NOCP) ? " NOCP" : "",
-			(temp & RH_A_OCPM) ? " OCPM" : "",
-			(temp & RH_A_DT) ? " DT" : "",
-			(temp & RH_A_NPS) ? " NPS" : "",
-			(temp & RH_A_PSM) ? " PSM" : "",
-			ndp
-			);
-		temp = roothub_b (controller);
-		dbg ("roothub.b: %08x PPCM=%04x DR=%04x",
-			temp,
-			(temp & RH_B_PPCM) >> 16,
-			(temp & RH_B_DR)
-			);
-		temp = roothub_status (controller);
-		dbg ("roothub.status: %08x%s%s%s%s%s%s",
-			temp,
-			(temp & RH_HS_CRWE) ? " CRWE" : "",
-			(temp & RH_HS_OCIC) ? " OCIC" : "",
-			(temp & RH_HS_LPSC) ? " LPSC" : "",
-			(temp & RH_HS_DRWE) ? " DRWE" : "",
-			(temp & RH_HS_OCI) ? " OCI" : "",
-			(temp & RH_HS_LPS) ? " LPS" : ""
-			);
-	}
-
-	for (i = 0; i < ndp; i++) {
-		temp = roothub_portstatus (controller, i);
-		dbg ("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s",
-			i,
-			temp,
-			(temp & RH_PS_PRSC) ? " PRSC" : "",
-			(temp & RH_PS_OCIC) ? " OCIC" : "",
-			(temp & RH_PS_PSSC) ? " PSSC" : "",
-			(temp & RH_PS_PESC) ? " PESC" : "",
-			(temp & RH_PS_CSC) ? " CSC" : "",
-
-			(temp & RH_PS_LSDA) ? " LSDA" : "",
-			(temp & RH_PS_PPS) ? " PPS" : "",
-			(temp & RH_PS_PRS) ? " PRS" : "",
-			(temp & RH_PS_POCI) ? " POCI" : "",
-			(temp & RH_PS_PSS) ? " PSS" : "",
-
-			(temp & RH_PS_PES) ? " PES" : "",
-			(temp & RH_PS_CCS) ? " CCS" : ""
-			);
-	}
-}
-
-static void ohci_dump (ohci_t *controller, int verbose)
-{
-	dbg ("OHCI controller usb-%s state", controller->slot_name);
-
-	/* dumps some of the state we know about */
-	ohci_dump_status (controller);
-	if (verbose)
-		ep_print_int_eds (controller, "hcca");
-	dbg ("hcca frame #%04x", controller->hcca->frame_no);
-	ohci_dump_roothub (controller, 1);
-}
-
-
-#endif /* DEBUG */
-
-/*-------------------------------------------------------------------------*
- * Interface functions (URB)
- *-------------------------------------------------------------------------*/
-
-/* get a transfer request */
-
-int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer,
-		int transfer_len, struct devrequest *setup, int interval)
-{
-	ohci_t *ohci;
-	ed_t * ed;
-	urb_priv_t *purb_priv;
-	int i, size = 0;
-
-	ohci = &gohci;
-
-	/* when controller's hung, permit only roothub cleanup attempts
-	 * such as powering down ports */
-	if (ohci->disabled) {
-		err("sohci_submit_job: EPIPE");
-		return -1;
-	}
-
-	/* every endpoint has a ed, locate and fill it */
-	if (!(ed = ep_add_ed (dev, pipe))) {
-		err("sohci_submit_job: ENOMEM");
-		return -1;
-	}
-
-	/* for the private part of the URB we need the number of TDs (size) */
-	switch (usb_pipetype (pipe)) {
-		case PIPE_BULK: /* one TD for every 4096 Byte */
-			size = (transfer_len - 1) / 4096 + 1;
-			break;
-		case PIPE_CONTROL: /* 1 TD for setup, 1 for ACK and 1 for every 4096 B */
-			size = (transfer_len == 0)? 2:
-						(transfer_len - 1) / 4096 + 3;
-			break;
-	}
-
-	if (size >= (N_URB_TD - 1)) {
-		err("need %d TDs, only have %d", size, N_URB_TD);
-		return -1;
-	}
-	purb_priv = &urb_priv;
-	purb_priv->pipe = pipe;
-
-	/* fill the private part of the URB */
-	purb_priv->length = size;
-	purb_priv->ed = ed;
-	purb_priv->actual_length = 0;
-
-	/* allocate the TDs */
-	/* note that td[0] was allocated in ep_add_ed */
-	for (i = 0; i < size; i++) {
-		purb_priv->td[i] = td_alloc (dev);
-		if (!purb_priv->td[i]) {
-			purb_priv->length = i;
-			urb_free_priv (purb_priv);
-			err("sohci_submit_job: ENOMEM");
-			return -1;
-		}
-	}
-
-	if (ed->state == ED_NEW || (ed->state & ED_DEL)) {
-		urb_free_priv (purb_priv);
-		err("sohci_submit_job: EINVAL");
-		return -1;
-	}
-
-	/* link the ed into a chain if is not already */
-	if (ed->state != ED_OPER)
-		ep_link (ohci, ed);
-
-	/* fill the TDs and link it to the ed */
-	td_submit_job(dev, pipe, buffer, transfer_len, setup, purb_priv, interval);
-
-	return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef DEBUG
-/* tell us the current USB frame number */
-
-static int sohci_get_current_frame_number (struct usb_device *usb_dev)
-{
-	ohci_t *ohci = &gohci;
-
-	return m16_swap (ohci->hcca->frame_no);
-}
-#endif
-
-/*-------------------------------------------------------------------------*
- * ED handling functions
- *-------------------------------------------------------------------------*/
-
-/* link an ed into one of the HC chains */
-
-static int ep_link (ohci_t *ohci, ed_t *edi)
-{
-	volatile ed_t *ed = edi;
-
-	ed->state = ED_OPER;
-
-	switch (ed->type) {
-	case PIPE_CONTROL:
-		ed->hwNextED = 0;
-		if (ohci->ed_controltail == NULL) {
-			writel ((long)ed, &ohci->regs->ed_controlhead);
-		} else {
-			ohci->ed_controltail->hwNextED = m32_swap (ed);
-		}
-		ed->ed_prev = ohci->ed_controltail;
-		if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
-			!ohci->ed_rm_list[1] && !ohci->sleeping) {
-			ohci->hc_control |= OHCI_CTRL_CLE;
-			writel (ohci->hc_control, &ohci->regs->control);
-		}
-		ohci->ed_controltail = edi;
-		break;
-
-	case PIPE_BULK:
-		ed->hwNextED = 0;
-		if (ohci->ed_bulktail == NULL) {
-			writel ((long)ed, &ohci->regs->ed_bulkhead);
-		} else {
-			ohci->ed_bulktail->hwNextED = m32_swap (ed);
-		}
-		ed->ed_prev = ohci->ed_bulktail;
-		if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
-			!ohci->ed_rm_list[1] && !ohci->sleeping) {
-			ohci->hc_control |= OHCI_CTRL_BLE;
-			writel (ohci->hc_control, &ohci->regs->control);
-		}
-		ohci->ed_bulktail = edi;
-		break;
-	}
-	return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* unlink an ed from one of the HC chains.
- * just the link to the ed is unlinked.
- * the link from the ed still points to another operational ed or 0
- * so the HC can eventually finish the processing of the unlinked ed */
-
-static int ep_unlink (ohci_t *ohci, ed_t *ed)
-{
-	ed->hwINFO |= m32_swap (OHCI_ED_SKIP);
-
-	switch (ed->type) {
-	case PIPE_CONTROL:
-		if (ed->ed_prev == NULL) {
-			if (!ed->hwNextED) {
-				ohci->hc_control &= ~OHCI_CTRL_CLE;
-				writel (ohci->hc_control, &ohci->regs->control);
-			}
-			writel (m32_swap (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_controlhead);
-		} else {
-			ed->ed_prev->hwNextED = ed->hwNextED;
-		}
-		if (ohci->ed_controltail == ed) {
-			ohci->ed_controltail = ed->ed_prev;
-		} else {
-			((ed_t *)m32_swap (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
-		}
-		break;
-
-	case PIPE_BULK:
-		if (ed->ed_prev == NULL) {
-			if (!ed->hwNextED) {
-				ohci->hc_control &= ~OHCI_CTRL_BLE;
-				writel (ohci->hc_control, &ohci->regs->control);
-			}
-			writel (m32_swap (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_bulkhead);
-		} else {
-			ed->ed_prev->hwNextED = ed->hwNextED;
-		}
-		if (ohci->ed_bulktail == ed) {
-			ohci->ed_bulktail = ed->ed_prev;
-		} else {
-			((ed_t *)m32_swap (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
-		}
-		break;
-	}
-	ed->state = ED_UNLINK;
-	return 0;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* add/reinit an endpoint; this should be done once at the usb_set_configuration command,
- * but the USB stack is a little bit stateless	so we do it at every transaction
- * if the state of the ed is ED_NEW then a dummy td is added and the state is changed to ED_UNLINK
- * in all other cases the state is left unchanged
- * the ed info fields are setted anyway even though most of them should not change */
-
-static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
-{
-	td_t *td;
-	ed_t *ed_ret;
-	volatile ed_t *ed;
-
-	ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint (pipe) << 1) |
-			(usb_pipecontrol (pipe)? 0: usb_pipeout (pipe))];
-
-	if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) {
-		err("ep_add_ed: pending delete");
-		/* pending delete request */
-		return NULL;
-	}
-
-	if (ed->state == ED_NEW) {
-		ed->hwINFO = m32_swap (OHCI_ED_SKIP); /* skip ed */
-		/* dummy td; end of td list for ed */
-		td = td_alloc (usb_dev);
-		ed->hwTailP = m32_swap (td);
-		ed->hwHeadP = ed->hwTailP;
-		ed->state = ED_UNLINK;
-		ed->type = usb_pipetype (pipe);
-		ohci_dev.ed_cnt++;
-	}
-
-	ed->hwINFO = m32_swap (usb_pipedevice (pipe)
-			| usb_pipeendpoint (pipe) << 7
-			| (usb_pipeisoc (pipe)? 0x8000: 0)
-			| (usb_pipecontrol (pipe)? 0: (usb_pipeout (pipe)? 0x800: 0x1000))
-			| usb_pipeslow (pipe) << 13
-			| usb_maxpacket (usb_dev, pipe) << 16);
-
-	return ed_ret;
-}
-
-/*-------------------------------------------------------------------------*
- * TD handling functions
- *-------------------------------------------------------------------------*/
-
-/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
-
-static void td_fill (ohci_t *ohci, unsigned int info,
-	void *data, int len,
-	struct usb_device *dev, int index, urb_priv_t *urb_priv)
-{
-	volatile td_t  *td, *td_pt;
-#ifdef OHCI_FILL_TRACE
-	int i;
-#endif
-
-	if (index > urb_priv->length) {
-		err("index > length");
-		return;
-	}
-	/* use this td as the next dummy */
-	td_pt = urb_priv->td [index];
-	td_pt->hwNextTD = 0;
-
-	/* fill the old dummy TD */
-	td = urb_priv->td [index] = (td_t *)(m32_swap (urb_priv->ed->hwTailP) & ~0xf);
-
-	td->ed = urb_priv->ed;
-	td->next_dl_td = NULL;
-	td->index = index;
-	td->data = (__u32)data;
-#ifdef OHCI_FILL_TRACE
-	if (1 || (usb_pipebulk(urb_priv->pipe) &&
-				usb_pipeout(urb_priv->pipe))) {
-		for (i = 0; i < len; i++)
-		printf("td->data[%d] %#2x\n",i, ((unsigned char *)(td->data+0x80000000))[i]);
-	}
-#endif
-	if (!len)
-		data = 0;
-
-	td->hwINFO = m32_swap (info);
-	td->hwCBP = m32_swap (data);
-	if (data)
-		td->hwBE = m32_swap (data + len - 1);
-	else
-		td->hwBE = 0;
-	td->hwNextTD = m32_swap (td_pt);
-	td->hwPSW [0] = m16_swap (((__u32)data & 0x0FFF) | 0xE000);
-
-	/* append to queue */
-	td->ed->hwTailP = td->hwNextTD;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* prepare all TDs of a transfer */
-
-#define kseg_to_phys(x)	  ((void *)((__u32)(x) - 0x80000000))
-
-static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buffer,
-	int transfer_len, struct devrequest *setup, urb_priv_t *urb, int interval)
-{
-	ohci_t *ohci = &gohci;
-	int data_len = transfer_len;
-	void *data;
-	int cnt = 0;
-	__u32 info = 0;
-	unsigned int toggle = 0;
-
-	/* OHCI handles the DATA-toggles itself, we just use the USB-toggle bits for reseting */
-	if(usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
-		toggle = TD_T_TOGGLE;
-	} else {
-		toggle = TD_T_DATA0;
-		usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 1);
-	}
-	urb->td_cnt = 0;
-	if (data_len)
-		data = kseg_to_phys(buffer);
-	else
-		data = 0;
-
-	switch (usb_pipetype (pipe)) {
-	case PIPE_BULK:
-		info = usb_pipeout (pipe)?
-			TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN ;
-		while(data_len > 4096) {
-			td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, 4096, dev, cnt, urb);
-			data += 4096; data_len -= 4096; cnt++;
-		}
-		info = usb_pipeout (pipe)?
-			TD_CC | TD_DP_OUT : TD_CC | TD_R | TD_DP_IN ;
-		td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, data_len, dev, cnt, urb);
-		cnt++;
-
-		if (!ohci->sleeping)
-			writel (OHCI_BLF, &ohci->regs->cmdstatus); /* start bulk list */
-		break;
-
-	case PIPE_CONTROL:
-		info = TD_CC | TD_DP_SETUP | TD_T_DATA0;
-		td_fill (ohci, info, kseg_to_phys(setup), 8, dev, cnt++, urb);
-		if (data_len > 0) {
-			info = usb_pipeout (pipe)?
-				TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 : TD_CC | TD_R | TD_DP_IN | TD_T_DATA1;
-			/* NOTE:  mishandles transfers >8K, some >4K */
-			td_fill (ohci, info, data, data_len, dev, cnt++, urb);
-		}
-		info = usb_pipeout (pipe)?
-			TD_CC | TD_DP_IN | TD_T_DATA1: TD_CC | TD_DP_OUT | TD_T_DATA1;
-		td_fill (ohci, info, data, 0, dev, cnt++, urb);
-		if (!ohci->sleeping)
-			writel (OHCI_CLF, &ohci->regs->cmdstatus); /* start Control list */
-		break;
-	}
-	if (urb->length != cnt)
-		dbg("TD LENGTH %d != CNT %d", urb->length, cnt);
-}
-
-/*-------------------------------------------------------------------------*
- * Done List handling functions
- *-------------------------------------------------------------------------*/
-
-
-/* calculate the transfer length and update the urb */
-
-static void dl_transfer_length(td_t * td)
-{
-	__u32 tdINFO, tdBE, tdCBP;
-	urb_priv_t *lurb_priv = &urb_priv;
-
-	tdINFO = m32_swap (td->hwINFO);
-	tdBE   = m32_swap (td->hwBE);
-	tdCBP  = m32_swap (td->hwCBP);
-
-
-	if (!(usb_pipecontrol(lurb_priv->pipe) &&
-	    ((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
-		if (tdBE != 0) {
-			if (td->hwCBP == 0)
-				lurb_priv->actual_length += tdBE - td->data + 1;
-			else
-				lurb_priv->actual_length += tdCBP - td->data;
-		}
-	}
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* replies to the request have to be on a FIFO basis so
- * we reverse the reversed done-list */
-
-static td_t * dl_reverse_done_list (ohci_t *ohci)
-{
-	__u32 td_list_hc;
-	td_t *td_rev = NULL;
-	td_t *td_list = NULL;
-	urb_priv_t *lurb_priv = NULL;
-
-	td_list_hc = m32_swap (ohci->hcca->done_head) & 0xfffffff0;
-	ohci->hcca->done_head = 0;
-
-	while (td_list_hc) {
-		td_list = (td_t *)td_list_hc;
-
-		if (TD_CC_GET (m32_swap (td_list->hwINFO))) {
-			lurb_priv = &urb_priv;
-			dbg(" USB-error/status: %x : %p",
-					TD_CC_GET (m32_swap (td_list->hwINFO)), td_list);
-			if (td_list->ed->hwHeadP & m32_swap (0x1)) {
-				if (lurb_priv && ((td_list->index + 1) < lurb_priv->length)) {
-					td_list->ed->hwHeadP =
-						(lurb_priv->td[lurb_priv->length - 1]->hwNextTD & m32_swap (0xfffffff0)) |
-									(td_list->ed->hwHeadP & m32_swap (0x2));
-					lurb_priv->td_cnt += lurb_priv->length - td_list->index - 1;
-				} else
-					td_list->ed->hwHeadP &= m32_swap (0xfffffff2);
-			}
-		}
-
-		td_list->next_dl_td = td_rev;
-		td_rev = td_list;
-		td_list_hc = m32_swap (td_list->hwNextTD) & 0xfffffff0;
-	}
-	return td_list;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* td done list */
-static int dl_done_list (ohci_t *ohci, td_t *td_list)
-{
-	td_t *td_list_next = NULL;
-	ed_t *ed;
-	int cc = 0;
-	int stat = 0;
-	/* urb_t *urb; */
-	urb_priv_t *lurb_priv;
-	__u32 tdINFO, edHeadP, edTailP;
-
-	while (td_list) {
-		td_list_next = td_list->next_dl_td;
-
-		lurb_priv = &urb_priv;
-		tdINFO = m32_swap (td_list->hwINFO);
-
-		ed = td_list->ed;
-
-		dl_transfer_length(td_list);
-
-		/* error code of transfer */
-		cc = TD_CC_GET (tdINFO);
-		if (cc != 0) {
-			dbg("ConditionCode %#x", cc);
-			stat = cc_to_error[cc];
-		}
-
-		if (ed->state != ED_NEW) {
-			edHeadP = m32_swap (ed->hwHeadP) & 0xfffffff0;
-			edTailP = m32_swap (ed->hwTailP);
-
-			/* unlink eds if they are not busy */
-			if ((edHeadP == edTailP) && (ed->state == ED_OPER))
-				ep_unlink (ohci, ed);
-		}
-
-		td_list = td_list_next;
-	}
-	return stat;
-}
-
-/*-------------------------------------------------------------------------*
- * Virtual Root Hub
- *-------------------------------------------------------------------------*/
-
-/* Device descriptor */
-static __u8 root_hub_dev_des[] =
-{
-	0x12,	    /*	__u8  bLength; */
-	0x01,	    /*	__u8  bDescriptorType; Device */
-	0x10,	    /*	__u16 bcdUSB; v1.1 */
-	0x01,
-	0x09,	    /*	__u8  bDeviceClass; HUB_CLASSCODE */
-	0x00,	    /*	__u8  bDeviceSubClass; */
-	0x00,	    /*	__u8  bDeviceProtocol; */
-	0x08,	    /*	__u8  bMaxPacketSize0; 8 Bytes */
-	0x00,	    /*	__u16 idVendor; */
-	0x00,
-	0x00,	    /*	__u16 idProduct; */
-	0x00,
-	0x00,	    /*	__u16 bcdDevice; */
-	0x00,
-	0x00,	    /*	__u8  iManufacturer; */
-	0x01,	    /*	__u8  iProduct; */
-	0x00,	    /*	__u8  iSerialNumber; */
-	0x01	    /*	__u8  bNumConfigurations; */
-};
-
-
-/* Configuration descriptor */
-static __u8 root_hub_config_des[] =
-{
-	0x09,	    /*	__u8  bLength; */
-	0x02,	    /*	__u8  bDescriptorType; Configuration */
-	0x19,	    /*	__u16 wTotalLength; */
-	0x00,
-	0x01,	    /*	__u8  bNumInterfaces; */
-	0x01,	    /*	__u8  bConfigurationValue; */
-	0x00,	    /*	__u8  iConfiguration; */
-	0x40,	    /*	__u8  bmAttributes;
-		 Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
-	0x00,	    /*	__u8  MaxPower; */
-
-	/* interface */
-	0x09,	    /*	__u8  if_bLength; */
-	0x04,	    /*	__u8  if_bDescriptorType; Interface */
-	0x00,	    /*	__u8  if_bInterfaceNumber; */
-	0x00,	    /*	__u8  if_bAlternateSetting; */
-	0x01,	    /*	__u8  if_bNumEndpoints; */
-	0x09,	    /*	__u8  if_bInterfaceClass; HUB_CLASSCODE */
-	0x00,	    /*	__u8  if_bInterfaceSubClass; */
-	0x00,	    /*	__u8  if_bInterfaceProtocol; */
-	0x00,	    /*	__u8  if_iInterface; */
-
-	/* endpoint */
-	0x07,	    /*	__u8  ep_bLength; */
-	0x05,	    /*	__u8  ep_bDescriptorType; Endpoint */
-	0x81,	    /*	__u8  ep_bEndpointAddress; IN Endpoint 1 */
-	0x03,	    /*	__u8  ep_bmAttributes; Interrupt */
-	0x02,	    /*	__u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
-	0x00,
-	0xff	    /*	__u8  ep_bInterval; 255 ms */
-};
-
-static unsigned char root_hub_str_index0[] =
-{
-	0x04,			/*  __u8  bLength; */
-	0x03,			/*  __u8  bDescriptorType; String-descriptor */
-	0x09,			/*  __u8  lang ID */
-	0x04,			/*  __u8  lang ID */
-};
-
-static unsigned char root_hub_str_index1[] =
-{
-	28,			/*  __u8  bLength; */
-	0x03,			/*  __u8  bDescriptorType; String-descriptor */
-	'O',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'H',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'C',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'I',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	' ',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'R',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'o',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'o',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	't',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	' ',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'H',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'u',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'b',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-};
-
-/* Hub class-specific descriptor is constructed dynamically */
-
-
-/*-------------------------------------------------------------------------*/
-
-#define OK(x)			len = (x); break
-#ifdef DEBUG
-#define WR_RH_STAT(x)		{info("WR:status %#8x", (x));writel((x), &gohci.regs->roothub.status);}
-#define WR_RH_PORTSTAT(x)	{info("WR:portstatus[%d] %#8x", wIndex-1, (x));writel((x), &gohci.regs->roothub.portstatus[wIndex-1]);}
-#else
-#define WR_RH_STAT(x)		writel((x), &gohci.regs->roothub.status)
-#define WR_RH_PORTSTAT(x)	writel((x), &gohci.regs->roothub.portstatus[wIndex-1])
-#endif
-#define RD_RH_STAT		roothub_status(&gohci)
-#define RD_RH_PORTSTAT		roothub_portstatus(&gohci,wIndex-1)
-
-/* request to virtual root hub */
-
-int rh_check_port_status(ohci_t *controller)
-{
-	__u32 temp, ndp, i;
-	int res;
-
-	res = -1;
-	temp = roothub_a (controller);
-	ndp = (temp & RH_A_NDP);
-	for (i = 0; i < ndp; i++) {
-		temp = roothub_portstatus (controller, i);
-		/* check for a device disconnect */
-		if (((temp & (RH_PS_PESC | RH_PS_CSC)) ==
-			(RH_PS_PESC | RH_PS_CSC)) &&
-			((temp & RH_PS_CCS) == 0)) {
-			res = i;
-			break;
-		}
-	}
-	return res;
-}
-
-static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
-		void *buffer, int transfer_len, struct devrequest *cmd)
-{
-	void * data = buffer;
-	int leni = transfer_len;
-	int len = 0;
-	int stat = 0;
-	__u32 datab[4];
-	__u8 *data_buf = (__u8 *)datab;
-	__u16 bmRType_bReq;
-	__u16 wValue;
-	__u16 wIndex;
-	__u16 wLength;
-
-#ifdef DEBUG
-urb_priv.actual_length = 0;
-pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
-#else
-	wait_ms(1);
-#endif
-	if (usb_pipeint(pipe)) {
-		info("Root-Hub submit IRQ: NOT implemented");
-		return 0;
-	}
-
-	bmRType_bReq  = cmd->requesttype | (cmd->request << 8);
-	wValue	      = m16_swap (cmd->value);
-	wIndex	      = m16_swap (cmd->index);
-	wLength	      = m16_swap (cmd->length);
-
-	info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x",
-		dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength);
-
-	switch (bmRType_bReq) {
-	/* Request Destination:
-	   without flags: Device,
-	   RH_INTERFACE: interface,
-	   RH_ENDPOINT: endpoint,
-	   RH_CLASS means HUB here,
-	   RH_OTHER | RH_CLASS	almost ever means HUB_PORT here
-	*/
-
-	case RH_GET_STATUS:
-			*(__u16 *) data_buf = m16_swap (1); OK (2);
-	case RH_GET_STATUS | RH_INTERFACE:
-			*(__u16 *) data_buf = m16_swap (0); OK (2);
-	case RH_GET_STATUS | RH_ENDPOINT:
-			*(__u16 *) data_buf = m16_swap (0); OK (2);
-	case RH_GET_STATUS | RH_CLASS:
-			*(__u32 *) data_buf = m32_swap (
-				RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE));
-			OK (4);
-	case RH_GET_STATUS | RH_OTHER | RH_CLASS:
-			*(__u32 *) data_buf = m32_swap (RD_RH_PORTSTAT); OK (4);
-
-	case RH_CLEAR_FEATURE | RH_ENDPOINT:
-		switch (wValue) {
-			case (RH_ENDPOINT_STALL): OK (0);
-		}
-		break;
-
-	case RH_CLEAR_FEATURE | RH_CLASS:
-		switch (wValue) {
-			case RH_C_HUB_LOCAL_POWER:
-				OK(0);
-			case (RH_C_HUB_OVER_CURRENT):
-					WR_RH_STAT(RH_HS_OCIC); OK (0);
-		}
-		break;
-
-	case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
-		switch (wValue) {
-			case (RH_PORT_ENABLE):
-					WR_RH_PORTSTAT (RH_PS_CCS ); OK (0);
-			case (RH_PORT_SUSPEND):
-					WR_RH_PORTSTAT (RH_PS_POCI); OK (0);
-			case (RH_PORT_POWER):
-					WR_RH_PORTSTAT (RH_PS_LSDA); OK (0);
-			case (RH_C_PORT_CONNECTION):
-					WR_RH_PORTSTAT (RH_PS_CSC ); OK (0);
-			case (RH_C_PORT_ENABLE):
-					WR_RH_PORTSTAT (RH_PS_PESC); OK (0);
-			case (RH_C_PORT_SUSPEND):
-					WR_RH_PORTSTAT (RH_PS_PSSC); OK (0);
-			case (RH_C_PORT_OVER_CURRENT):
-					WR_RH_PORTSTAT (RH_PS_OCIC); OK (0);
-			case (RH_C_PORT_RESET):
-					WR_RH_PORTSTAT (RH_PS_PRSC); OK (0);
-		}
-		break;
-
-	case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
-		switch (wValue) {
-			case (RH_PORT_SUSPEND):
-					WR_RH_PORTSTAT (RH_PS_PSS ); OK (0);
-			case (RH_PORT_RESET): /* BUG IN HUP CODE *********/
-					if (RD_RH_PORTSTAT & RH_PS_CCS)
-					    WR_RH_PORTSTAT (RH_PS_PRS);
-					OK (0);
-			case (RH_PORT_POWER):
-					WR_RH_PORTSTAT (RH_PS_PPS ); OK (0);
-			case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/
-					if (RD_RH_PORTSTAT & RH_PS_CCS)
-					    WR_RH_PORTSTAT (RH_PS_PES );
-					OK (0);
-		}
-		break;
-
-	case RH_SET_ADDRESS: gohci.rh.devnum = wValue; OK(0);
-
-	case RH_GET_DESCRIPTOR:
-		switch ((wValue & 0xff00) >> 8) {
-			case (0x01): /* device descriptor */
-				len = min_t(unsigned int,
-					  leni,
-					  min_t(unsigned int,
-					      sizeof (root_hub_dev_des),
-					      wLength));
-				data_buf = root_hub_dev_des; OK(len);
-			case (0x02): /* configuration descriptor */
-				len = min_t(unsigned int,
-					  leni,
-					  min_t(unsigned int,
-					      sizeof (root_hub_config_des),
-					      wLength));
-				data_buf = root_hub_config_des; OK(len);
-			case (0x03): /* string descriptors */
-				if(wValue==0x0300) {
-					len = min_t(unsigned int,
-						  leni,
-						  min_t(unsigned int,
-						      sizeof (root_hub_str_index0),
-						      wLength));
-					data_buf = root_hub_str_index0;
-					OK(len);
-				}
-				if(wValue==0x0301) {
-					len = min_t(unsigned int,
-						  leni,
-						  min_t(unsigned int,
-						      sizeof (root_hub_str_index1),
-						      wLength));
-					data_buf = root_hub_str_index1;
-					OK(len);
-			}
-			default:
-				stat = USB_ST_STALLED;
-		}
-		break;
-
-	case RH_GET_DESCRIPTOR | RH_CLASS:
-	    {
-		    __u32 temp = roothub_a (&gohci);
-
-		    data_buf [0] = 9;		/* min length; */
-		    data_buf [1] = 0x29;
-		    data_buf [2] = temp & RH_A_NDP;
-		    data_buf [3] = 0;
-		    if (temp & RH_A_PSM)	/* per-port power switching? */
-			data_buf [3] |= 0x1;
-		    if (temp & RH_A_NOCP)	/* no overcurrent reporting? */
-			data_buf [3] |= 0x10;
-		    else if (temp & RH_A_OCPM)	/* per-port overcurrent reporting? */
-			data_buf [3] |= 0x8;
-
-		    /* corresponds to data_buf[4-7] */
-		    datab [1] = 0;
-		    data_buf [5] = (temp & RH_A_POTPGT) >> 24;
-		    temp = roothub_b (&gohci);
-		    data_buf [7] = temp & RH_B_DR;
-		    if (data_buf [2] < 7) {
-			data_buf [8] = 0xff;
-		    } else {
-			data_buf [0] += 2;
-			data_buf [8] = (temp & RH_B_DR) >> 8;
-			data_buf [10] = data_buf [9] = 0xff;
-		    }
-
-		    len = min_t(unsigned int, leni,
-			      min_t(unsigned int, data_buf [0], wLength));
-		    OK (len);
-		}
-
-	case RH_GET_CONFIGURATION:	*(__u8 *) data_buf = 0x01; OK (1);
-
-	case RH_SET_CONFIGURATION:	WR_RH_STAT (0x10000); OK (0);
-
-	default:
-		dbg ("unsupported root hub command");
-		stat = USB_ST_STALLED;
-	}
-
-#ifdef	DEBUG
-	ohci_dump_roothub (&gohci, 1);
-#else
-	wait_ms(1);
-#endif
-
-	len = min_t(int, len, leni);
-	if (data != data_buf)
-	    memcpy (data, data_buf, len);
-	dev->act_len = len;
-	dev->status = stat;
-
-#ifdef DEBUG
-	if (transfer_len)
-		urb_priv.actual_length = transfer_len;
-	pkt_print(dev, pipe, buffer, transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/);
-#else
-	wait_ms(1);
-#endif
-
-	return stat;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* common code for handling submit messages - used for all but root hub */
-/* accesses. */
-int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
-		int transfer_len, struct devrequest *setup, int interval)
-{
-	int stat = 0;
-	int maxsize = usb_maxpacket(dev, pipe);
-	int timeout;
-
-	/* device pulled? Shortcut the action. */
-	if (devgone == dev) {
-		dev->status = USB_ST_CRC_ERR;
-		return 0;
-	}
-
-#ifdef DEBUG
-	urb_priv.actual_length = 0;
-	pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
-#else
-	wait_ms(1);
-#endif
-	if (!maxsize) {
-		err("submit_common_message: pipesize for pipe %lx is zero",
-			pipe);
-		return -1;
-	}
-
-	if (sohci_submit_job(dev, pipe, buffer, transfer_len, setup, interval) < 0) {
-		err("sohci_submit_job failed");
-		return -1;
-	}
-
-	wait_ms(10);
-	/* ohci_dump_status(&gohci); */
-
-	/* allow more time for a BULK device to react - some are slow */
-#define BULK_TO	 5000	/* timeout in milliseconds */
-	if (usb_pipebulk(pipe))
-		timeout = BULK_TO;
-	else
-		timeout = 100;
-
-	timeout *= 4;
-	/* wait for it to complete */
-	for (;;) {
-		/* check whether the controller is done */
-		stat = hc_interrupt();
-		if (stat < 0) {
-			stat = USB_ST_CRC_ERR;
-			break;
-		}
-		if (stat >= 0 && stat != 0xff) {
-			/* 0xff is returned for an SF-interrupt */
-			break;
-		}
-		if (--timeout) {
-			udelay(250); /* wait_ms(1); */
-		} else {
-			err("CTL:TIMEOUT ");
-			stat = USB_ST_CRC_ERR;
-			break;
-		}
-	}
-	/* we got an Root Hub Status Change interrupt */
-	if (got_rhsc) {
-#ifdef DEBUG
-		ohci_dump_roothub (&gohci, 1);
-#endif
-		got_rhsc = 0;
-		/* abuse timeout */
-		timeout = rh_check_port_status(&gohci);
-		if (timeout >= 0) {
-#if 0 /* this does nothing useful, but leave it here in case that changes */
-			/* the called routine adds 1 to the passed value */
-			usb_hub_port_connect_change(gohci.rh.dev, timeout - 1);
-#endif
-			/*
-			 * XXX
-			 * This is potentially dangerous because it assumes
-			 * that only one device is ever plugged in!
-			 */
-			devgone = dev;
-		}
-	}
-
-	dev->status = stat;
-	dev->act_len = transfer_len;
-
-#ifdef DEBUG
-	pkt_print(dev, pipe, buffer, transfer_len, setup, "RET(ctlr)", usb_pipein(pipe));
-#else
-	wait_ms(1);
-#endif
-
-	/* free TDs in urb_priv */
-	urb_free_priv (&urb_priv);
-	return 0;
-}
-
-/* submit routines called from usb.c */
-int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
-		int transfer_len)
-{
-	info("submit_bulk_msg");
-	return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, 0);
-}
-
-int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
-		int transfer_len, struct devrequest *setup)
-{
-	int maxsize = usb_maxpacket(dev, pipe);
-
-	info("submit_control_msg");
-#ifdef DEBUG
-	urb_priv.actual_length = 0;
-	pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
-#else
-	wait_ms(1);
-#endif
-	if (!maxsize) {
-		err("submit_control_message: pipesize for pipe %lx is zero",
-			pipe);
-		return -1;
-	}
-	if (((pipe >> 8) & 0x7f) == gohci.rh.devnum) {
-		gohci.rh.dev = dev;
-		/* root hub - redirect */
-		return ohci_submit_rh_msg(dev, pipe, buffer, transfer_len,
-			setup);
-	}
-
-	return submit_common_msg(dev, pipe, buffer, transfer_len, setup, 0);
-}
-
-int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
-		int transfer_len, int interval)
-{
-	info("submit_int_msg");
-	return -1;
-}
-
-/*-------------------------------------------------------------------------*
- * HC functions
- *-------------------------------------------------------------------------*/
-
-/* reset the HC and BUS */
-
-static int hc_reset (ohci_t *ohci)
-{
-	int timeout = 30;
-	int smm_timeout = 50; /* 0,5 sec */
-
-	if (readl (&ohci->regs->control) & OHCI_CTRL_IR) { /* SMM owns the HC */
-		writel (OHCI_OCR, &ohci->regs->cmdstatus); /* request ownership */
-		info("USB HC TakeOver from SMM");
-		while (readl (&ohci->regs->control) & OHCI_CTRL_IR) {
-			wait_ms (10);
-			if (--smm_timeout == 0) {
-				err("USB HC TakeOver failed!");
-				return -1;
-			}
-		}
-	}
-
-	/* Disable HC interrupts */
-	writel (OHCI_INTR_MIE, &ohci->regs->intrdisable);
-
-	dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;",
-		ohci->slot_name,
-		readl (&ohci->regs->control));
-
-	/* Reset USB (needed by some controllers) */
-	writel (0, &ohci->regs->control);
-
-	/* HC Reset requires max 10 us delay */
-	writel (OHCI_HCR,  &ohci->regs->cmdstatus);
-	while ((readl (&ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
-		if (--timeout == 0) {
-			err("USB HC reset timed out!");
-			return -1;
-		}
-		udelay (1);
-	}
-	return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* Start an OHCI controller, set the BUS operational
- * enable interrupts
- * connect the virtual root hub */
-
-static int hc_start (ohci_t * ohci)
-{
-	__u32 mask;
-	unsigned int fminterval;
-
-	ohci->disabled = 1;
-
-	/* Tell the controller where the control and bulk lists are
-	 * The lists are empty now. */
-
-	writel (0, &ohci->regs->ed_controlhead);
-	writel (0, &ohci->regs->ed_bulkhead);
-
-	writel ((__u32)ohci->hcca, &ohci->regs->hcca); /* a reset clears this */
-
-	fminterval = 0x2edf;
-	writel ((fminterval * 9) / 10, &ohci->regs->periodicstart);
-	fminterval |= ((((fminterval - 210) * 6) / 7) << 16);
-	writel (fminterval, &ohci->regs->fminterval);
-	writel (0x628, &ohci->regs->lsthresh);
-
-	/* start controller operations */
-	ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER;
-	ohci->disabled = 0;
-	writel (ohci->hc_control, &ohci->regs->control);
-
-	/* disable all interrupts */
-	mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD |
-			OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC |
-			OHCI_INTR_OC | OHCI_INTR_MIE);
-	writel (mask, &ohci->regs->intrdisable);
-	/* clear all interrupts */
-	mask &= ~OHCI_INTR_MIE;
-	writel (mask, &ohci->regs->intrstatus);
-	/* Choose the interrupts we care about now  - but w/o MIE */
-	mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO;
-	writel (mask, &ohci->regs->intrenable);
-
-#ifdef	OHCI_USE_NPS
-	/* required for AMD-756 and some Mac platforms */
-	writel ((roothub_a (ohci) | RH_A_NPS) & ~RH_A_PSM,
-		&ohci->regs->roothub.a);
-	writel (RH_HS_LPSC, &ohci->regs->roothub.status);
-#endif	/* OHCI_USE_NPS */
-
-#define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);})
-	/* POTPGT delay is bits 24-31, in 2 ms units. */
-	mdelay ((roothub_a (ohci) >> 23) & 0x1fe);
-
-	/* connect the virtual root hub */
-	ohci->rh.devnum = 0;
-
-	return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* an interrupt happens */
-
-static int
-hc_interrupt (void)
-{
-	ohci_t *ohci = &gohci;
-	struct ohci_regs *regs = ohci->regs;
-	int ints;
-	int stat = -1;
-
-	if ((ohci->hcca->done_head != 0) && !(m32_swap (ohci->hcca->done_head) & 0x01)) {
-		ints =	OHCI_INTR_WDH;
-	} else {
-		ints = readl (&regs->intrstatus);
-	}
-
-	/* dbg("Interrupt: %x frame: %x", ints, le16_to_cpu (ohci->hcca->frame_no)); */
-
-	if (ints & OHCI_INTR_RHSC) {
-		got_rhsc = 1;
-	}
-
-	if (ints & OHCI_INTR_UE) {
-		ohci->disabled++;
-		err ("OHCI Unrecoverable Error, controller usb-%s disabled",
-			ohci->slot_name);
-		/* e.g. due to PCI Master/Target Abort */
-
-#ifdef	DEBUG
-		ohci_dump (ohci, 1);
-#else
-	wait_ms(1);
-#endif
-		/* FIXME: be optimistic, hope that bug won't repeat often. */
-		/* Make some non-interrupt context restart the controller. */
-		/* Count and limit the retries though; either hardware or */
-		/* software errors can go forever... */
-		hc_reset (ohci);
-		return -1;
-	}
-
-	if (ints & OHCI_INTR_WDH) {
-		wait_ms(1);
-		writel (OHCI_INTR_WDH, &regs->intrdisable);
-		stat = dl_done_list (&gohci, dl_reverse_done_list (&gohci));
-		writel (OHCI_INTR_WDH, &regs->intrenable);
-	}
-
-	if (ints & OHCI_INTR_SO) {
-		dbg("USB Schedule overrun\n");
-		writel (OHCI_INTR_SO, &regs->intrenable);
-		stat = -1;
-	}
-
-	/* FIXME:  this assumes SOF (1/ms) interrupts don't get lost... */
-	if (ints & OHCI_INTR_SF) {
-		unsigned int frame = m16_swap (ohci->hcca->frame_no) & 1;
-		wait_ms(1);
-		writel (OHCI_INTR_SF, &regs->intrdisable);
-		if (ohci->ed_rm_list[frame] != NULL)
-			writel (OHCI_INTR_SF, &regs->intrenable);
-		stat = 0xff;
-	}
-
-	writel (ints, &regs->intrstatus);
-	return stat;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*-------------------------------------------------------------------------*/
-
-/* De-allocate all resources.. */
-
-static void hc_release_ohci (ohci_t *ohci)
-{
-	dbg ("USB HC release ohci usb-%s", ohci->slot_name);
-
-	if (!ohci->disabled)
-		hc_reset (ohci);
-}
-
-/*-------------------------------------------------------------------------*/
-
-#define __read_32bit_c0_register(source, sel)				\
-({ int __res;								\
-	if (sel == 0)							\
-		__asm__ __volatile__(					\
-			"mfc0\t%0, " #source "\n\t"			\
-			: "=r" (__res));				\
-	else								\
-		__asm__ __volatile__(					\
-			".set\tmips32\n\t"				\
-			"mfc0\t%0, " #source ", " #sel "\n\t"		\
-			".set\tmips0\n\t"				\
-			: "=r" (__res));				\
-	__res;								\
-})
-
-#define read_c0_prid()		__read_32bit_c0_register($15, 0)
-
-/*
- * low level initalisation routine, called from usb.c
- */
-static char ohci_inited = 0;
-
-int usb_lowlevel_init(void)
-{
-	u32 pin_func;
-	u32 sys_freqctrl, sys_clksrc;
-	u32 prid = read_c0_prid();
-
-	dbg("in usb_lowlevel_init\n");
-
-	/* zero and disable FREQ2 */
-	sys_freqctrl = au_readl(SYS_FREQCTRL0);
-	sys_freqctrl &= ~0xFFF00000;
-	au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
-	/* zero and disable USBH/USBD clocks */
-	sys_clksrc = au_readl(SYS_CLKSRC);
-	sys_clksrc &= ~0x00007FE0;
-	au_writel(sys_clksrc, SYS_CLKSRC);
-
-	sys_freqctrl = au_readl(SYS_FREQCTRL0);
-	sys_freqctrl &= ~0xFFF00000;
-
-	sys_clksrc = au_readl(SYS_CLKSRC);
-	sys_clksrc &= ~0x00007FE0;
-
-	switch (prid & 0x000000FF) {
-	case 0x00: /* DA */
-	case 0x01: /* HA */
-	case 0x02: /* HB */
-		/* CPU core freq to 48MHz to slow it way down... */
-		au_writel(4, SYS_CPUPLL);
-
-		/*
-		 * Setup 48MHz FREQ2 from CPUPLL for USB Host
-		 */
-		/* FRDIV2=3 -> div by 8 of 384MHz -> 48MHz */
-		sys_freqctrl |= ((3<<22) | (1<<21) | (0<<20));
-		au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
-		/* CPU core freq to 384MHz */
-		au_writel(0x20, SYS_CPUPLL);
-
-		printf("Au1000: 48MHz OHCI workaround enabled\n");
-		break;
-
-	default:  /* HC and newer */
-		/* FREQ2 = aux/2 = 48 MHz */
-		sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
-		au_writel(sys_freqctrl, SYS_FREQCTRL0);
-		break;
-	}
-
-	/*
-	 * Route 48MHz FREQ2 into USB Host and/or Device
-	 */
-	sys_clksrc |= ((4<<12) | (0<<11) | (0<<10));
-	au_writel(sys_clksrc, SYS_CLKSRC);
-
-	/* configure pins GPIO[14:9] as GPIO */
-	pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8080);
-
-	au_writel(pin_func, SYS_PINFUNC);
-	au_writel(0x2800, SYS_TRIOUTCLR);
-	au_writel(0x0030, SYS_OUTPUTCLR);
-
-	dbg("OHCI board setup complete\n");
-
-	/* enable host controller */
-	au_writel(USBH_ENABLE_CE, USB_HOST_CONFIG);
-	udelay(1000);
-	au_writel(USBH_ENABLE_INIT, USB_HOST_CONFIG);
-	udelay(1000);
-
-	/* wait for reset complete (read register twice; see au1500 errata) */
-	while (au_readl(USB_HOST_CONFIG),
-	       !(au_readl(USB_HOST_CONFIG) & USBH_ENABLE_RD))
-		udelay(1000);
-
-	dbg("OHCI clock running\n");
-
-	memset (&gohci, 0, sizeof (ohci_t));
-	memset (&urb_priv, 0, sizeof (urb_priv_t));
-
-	/* align the storage */
-	if ((__u32)&ghcca[0] & 0xff) {
-		err("HCCA not aligned!!");
-		return -1;
-	}
-	phcca = &ghcca[0];
-	info("aligned ghcca %p", phcca);
-	memset(&ohci_dev, 0, sizeof(struct ohci_device));
-	if ((__u32)&ohci_dev.ed[0] & 0x7) {
-		err("EDs not aligned!!");
-		return -1;
-	}
-	memset(gtd, 0, sizeof(td_t) * (NUM_TD + 1));
-	if ((__u32)gtd & 0x7) {
-		err("TDs not aligned!!");
-		return -1;
-	}
-	ptd = gtd;
-	gohci.hcca = phcca;
-	memset (phcca, 0, sizeof (struct ohci_hcca));
-
-	gohci.disabled = 1;
-	gohci.sleeping = 0;
-	gohci.irq = -1;
-	gohci.regs = (struct ohci_regs *)(USB_OHCI_BASE | 0xA0000000);
-
-	gohci.flags = 0;
-	gohci.slot_name = "au1x00";
-
-	dbg("OHCI revision: 0x%08x\n"
-	       "  RH: a: 0x%08x b: 0x%08x\n",
-	       readl(&gohci.regs->revision),
-	       readl(&gohci.regs->roothub.a), readl(&gohci.regs->roothub.b));
-
-	if (hc_reset (&gohci) < 0)
-		goto errout;
-
-	/* FIXME this is a second HC reset; why?? */
-	writel (gohci.hc_control = OHCI_USB_RESET, &gohci.regs->control);
-	wait_ms (10);
-
-	if (hc_start (&gohci) < 0)
-		goto errout;
-
-#ifdef	DEBUG
-	ohci_dump (&gohci, 1);
-#else
-	wait_ms(1);
-#endif
-	ohci_inited = 1;
-	return 0;
-
-  errout:
-	err("OHCI initialization error\n");
-	hc_release_ohci (&gohci);
-	/* Initialization failed */
-	au_writel(readl(USB_HOST_CONFIG) & ~USBH_ENABLE_CE, USB_HOST_CONFIG);
-	return -1;
-}
-
-int usb_lowlevel_stop(void)
-{
-	/* this gets called really early - before the controller has */
-	/* even been initialized! */
-	if (!ohci_inited)
-		return 0;
-	/* TODO release any interrupts, etc. */
-	/* call hc_release_ohci() here ? */
-	hc_reset (&gohci);
-	/* may not want to do this */
-	/* Disable clock */
-	au_writel(readl(USB_HOST_CONFIG) & ~USBH_ENABLE_CE, USB_HOST_CONFIG);
-	return 0;
-}
-
-#endif /* CONFIG_USB_OHCI */
diff --git a/cpu/mips/au1x00_usb_ohci.h b/cpu/mips/au1x00_usb_ohci.h
deleted file mode 100644
index bb9f351099..0000000000
--- a/cpu/mips/au1x00_usb_ohci.h
+++ /dev/null
@@ -1,416 +0,0 @@
-/*
- * URB OHCI HCD (Host Controller Driver) for USB.
- *
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2001 David Brownell <dbrownell@users.sourceforge.net>
- *
- * usb-ohci.h
- */
-
-
-static int cc_to_error[16] = {
-
-/* mapping of the OHCI CC status to error codes */
-	/* No  Error  */	0,
-	/* CRC Error  */	USB_ST_CRC_ERR,
-	/* Bit Stuff  */	USB_ST_BIT_ERR,
-	/* Data Togg  */	USB_ST_CRC_ERR,
-	/* Stall      */	USB_ST_STALLED,
-	/* DevNotResp */	-1,
-	/* PIDCheck   */	USB_ST_BIT_ERR,
-	/* UnExpPID   */	USB_ST_BIT_ERR,
-	/* DataOver   */	USB_ST_BUF_ERR,
-	/* DataUnder  */	USB_ST_BUF_ERR,
-	/* reservd    */	-1,
-	/* reservd    */	-1,
-	/* BufferOver */	USB_ST_BUF_ERR,
-	/* BuffUnder  */	USB_ST_BUF_ERR,
-	/* Not Access */	-1,
-	/* Not Access */	-1
-};
-
-/* ED States */
-
-#define ED_NEW		0x00
-#define ED_UNLINK	0x01
-#define ED_OPER		0x02
-#define ED_DEL		0x04
-#define ED_URB_DEL	0x08
-
-/* usb_ohci_ed */
-struct ed {
-	__u32 hwINFO;
-	__u32 hwTailP;
-	__u32 hwHeadP;
-	__u32 hwNextED;
-
-	struct ed *ed_prev;
-	__u8 int_period;
-	__u8 int_branch;
-	__u8 int_load;
-	__u8 int_interval;
-	__u8 state;
-	__u8 type;
-	__u16 last_iso;
-	struct ed *ed_rm_list;
-
-	struct usb_device *usb_dev;
-	__u32 unused[3];
-} __attribute__((aligned(16)));
-typedef struct ed ed_t;
-
-
-/* TD info field */
-#define TD_CC			0xf0000000
-#define TD_CC_GET(td_p)		((td_p >>28) & 0x0f)
-#define TD_CC_SET(td_p, cc)	(td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)
-#define TD_EC			0x0C000000
-#define TD_T			0x03000000
-#define TD_T_DATA0		0x02000000
-#define TD_T_DATA1		0x03000000
-#define TD_T_TOGGLE		0x00000000
-#define TD_R			0x00040000
-#define TD_DI			0x00E00000
-#define TD_DI_SET(X)		(((X) & 0x07)<< 21)
-#define TD_DP			0x00180000
-#define TD_DP_SETUP		0x00000000
-#define TD_DP_IN		0x00100000
-#define TD_DP_OUT		0x00080000
-
-#define TD_ISO			0x00010000
-#define TD_DEL			0x00020000
-
-/* CC Codes */
-#define TD_CC_NOERROR		0x00
-#define TD_CC_CRC		0x01
-#define TD_CC_BITSTUFFING	0x02
-#define TD_CC_DATATOGGLEM	0x03
-#define TD_CC_STALL		0x04
-#define TD_DEVNOTRESP		0x05
-#define TD_PIDCHECKFAIL		0x06
-#define TD_UNEXPECTEDPID	0x07
-#define TD_DATAOVERRUN		0x08
-#define TD_DATAUNDERRUN		0x09
-#define TD_BUFFEROVERRUN	0x0C
-#define TD_BUFFERUNDERRUN	0x0D
-#define TD_NOTACCESSED		0x0F
-
-
-#define MAXPSW 1
-
-struct td {
-	__u32 hwINFO;
-	__u32 hwCBP;		/* Current Buffer Pointer */
-	__u32 hwNextTD;		/* Next TD Pointer */
-	__u32 hwBE;		/* Memory Buffer End Pointer */
-
-	__u16 hwPSW[MAXPSW];
-	__u8 unused;
-	__u8 index;
-	struct ed *ed;
-	struct td *next_dl_td;
-	struct usb_device *usb_dev;
-	int transfer_len;
-	__u32 data;
-
-	__u32 unused2[2];
-} __attribute__((aligned(32)));
-typedef struct td td_t;
-
-#define OHCI_ED_SKIP	(1 << 14)
-
-/*
- * The HCCA (Host Controller Communications Area) is a 256 byte
- * structure defined in the OHCI spec. that the host controller is
- * told the base address of.  It must be 256-byte aligned.
- */
-
-#define NUM_INTS 32	/* part of the OHCI standard */
-struct ohci_hcca {
-	__u32	int_table[NUM_INTS];	/* Interrupt ED table */
-	__u16	frame_no;		/* current frame number */
-	__u16	pad1;			/* set to 0 on each frame_no change */
-	__u32	done_head;		/* info returned for an interrupt */
-	u8		reserved_for_hc[116];
-} __attribute__((aligned(256)));
-
-
-/*
- * Maximum number of root hub ports.
- */
-#define MAX_ROOT_PORTS	15	/* maximum OHCI root hub ports */
-
-/*
- * This is the structure of the OHCI controller's memory mapped I/O
- * region.  This is Memory Mapped I/O.	You must use the readl() and
- * writel() macros defined in asm/io.h to access these!!
- */
-struct ohci_regs {
-	/* control and status registers */
-	__u32	revision;
-	__u32	control;
-	__u32	cmdstatus;
-	__u32	intrstatus;
-	__u32	intrenable;
-	__u32	intrdisable;
-	/* memory pointers */
-	__u32	hcca;
-	__u32	ed_periodcurrent;
-	__u32	ed_controlhead;
-	__u32	ed_controlcurrent;
-	__u32	ed_bulkhead;
-	__u32	ed_bulkcurrent;
-	__u32	donehead;
-	/* frame counters */
-	__u32	fminterval;
-	__u32	fmremaining;
-	__u32	fmnumber;
-	__u32	periodicstart;
-	__u32	lsthresh;
-	/* Root hub ports */
-	struct	ohci_roothub_regs {
-		__u32	a;
-		__u32	b;
-		__u32	status;
-		__u32	portstatus[MAX_ROOT_PORTS];
-	} roothub;
-} __attribute__((aligned(32)));
-
-
-/* OHCI CONTROL AND STATUS REGISTER MASKS */
-
-/*
- * HcControl (control) register masks
- */
-#define OHCI_CTRL_CBSR	(3 << 0)	/* control/bulk service ratio */
-#define OHCI_CTRL_PLE	(1 << 2)	/* periodic list enable */
-#define OHCI_CTRL_IE	(1 << 3)	/* isochronous enable */
-#define OHCI_CTRL_CLE	(1 << 4)	/* control list enable */
-#define OHCI_CTRL_BLE	(1 << 5)	/* bulk list enable */
-#define OHCI_CTRL_HCFS	(3 << 6)	/* host controller functional state */
-#define OHCI_CTRL_IR	(1 << 8)	/* interrupt routing */
-#define OHCI_CTRL_RWC	(1 << 9)	/* remote wakeup connected */
-#define OHCI_CTRL_RWE	(1 << 10)	/* remote wakeup enable */
-
-/* pre-shifted values for HCFS */
-#	define OHCI_USB_RESET	(0 << 6)
-#	define OHCI_USB_RESUME	(1 << 6)
-#	define OHCI_USB_OPER	(2 << 6)
-#	define OHCI_USB_SUSPEND	(3 << 6)
-
-/*
- * HcCommandStatus (cmdstatus) register masks
- */
-#define OHCI_HCR	(1 << 0)	/* host controller reset */
-#define OHCI_CLF	(1 << 1)	/* control list filled */
-#define OHCI_BLF	(1 << 2)	/* bulk list filled */
-#define OHCI_OCR	(1 << 3)	/* ownership change request */
-#define OHCI_SOC	(3 << 16)	/* scheduling overrun count */
-
-/*
- * masks used with interrupt registers:
- * HcInterruptStatus (intrstatus)
- * HcInterruptEnable (intrenable)
- * HcInterruptDisable (intrdisable)
- */
-#define OHCI_INTR_SO	(1 << 0)	/* scheduling overrun */
-#define OHCI_INTR_WDH	(1 << 1)	/* writeback of done_head */
-#define OHCI_INTR_SF	(1 << 2)	/* start frame */
-#define OHCI_INTR_RD	(1 << 3)	/* resume detect */
-#define OHCI_INTR_UE	(1 << 4)	/* unrecoverable error */
-#define OHCI_INTR_FNO	(1 << 5)	/* frame number overflow */
-#define OHCI_INTR_RHSC	(1 << 6)	/* root hub status change */
-#define OHCI_INTR_OC	(1 << 30)	/* ownership change */
-#define OHCI_INTR_MIE	(1 << 31)	/* master interrupt enable */
-
-
-/* Virtual Root HUB */
-struct virt_root_hub {
-	int devnum; /* Address of Root Hub endpoint */
-	void *dev;  /* was urb */
-	void *int_addr;
-	int send;
-	int interval;
-};
-
-/* USB HUB CONSTANTS (not OHCI-specific; see hub.h) */
-
-/* destination of request */
-#define RH_INTERFACE		0x01
-#define RH_ENDPOINT		0x02
-#define RH_OTHER		0x03
-
-#define RH_CLASS		0x20
-#define RH_VENDOR		0x40
-
-/* Requests: bRequest << 8 | bmRequestType */
-#define RH_GET_STATUS		0x0080
-#define RH_CLEAR_FEATURE	0x0100
-#define RH_SET_FEATURE		0x0300
-#define RH_SET_ADDRESS		0x0500
-#define RH_GET_DESCRIPTOR	0x0680
-#define RH_SET_DESCRIPTOR	0x0700
-#define RH_GET_CONFIGURATION	0x0880
-#define RH_SET_CONFIGURATION	0x0900
-#define RH_GET_STATE		0x0280
-#define RH_GET_INTERFACE	0x0A80
-#define RH_SET_INTERFACE	0x0B00
-#define RH_SYNC_FRAME		0x0C80
-/* Our Vendor Specific Request */
-#define RH_SET_EP		0x2000
-
-
-/* Hub port features */
-#define RH_PORT_CONNECTION	0x00
-#define RH_PORT_ENABLE		0x01
-#define RH_PORT_SUSPEND		0x02
-#define RH_PORT_OVER_CURRENT	0x03
-#define RH_PORT_RESET		0x04
-#define RH_PORT_POWER		0x08
-#define RH_PORT_LOW_SPEED	0x09
-
-#define RH_C_PORT_CONNECTION	0x10
-#define RH_C_PORT_ENABLE	0x11
-#define RH_C_PORT_SUSPEND	0x12
-#define RH_C_PORT_OVER_CURRENT	0x13
-#define RH_C_PORT_RESET		0x14
-
-/* Hub features */
-#define RH_C_HUB_LOCAL_POWER	0x00
-#define RH_C_HUB_OVER_CURRENT	0x01
-
-#define RH_DEVICE_REMOTE_WAKEUP 0x00
-#define RH_ENDPOINT_STALL	0x01
-
-#define RH_ACK			0x01
-#define RH_REQ_ERR		-1
-#define RH_NACK			0x00
-
-
-/* OHCI ROOT HUB REGISTER MASKS */
-
-/* roothub.portstatus [i] bits */
-#define RH_PS_CCS		0x00000001	/* current connect status */
-#define RH_PS_PES		0x00000002	/* port enable status*/
-#define RH_PS_PSS		0x00000004	/* port suspend status */
-#define RH_PS_POCI		0x00000008	/* port over current indicator */
-#define RH_PS_PRS		0x00000010	/* port reset status */
-#define RH_PS_PPS		0x00000100	/* port power status */
-#define RH_PS_LSDA		0x00000200	/* low speed device attached */
-#define RH_PS_CSC		0x00010000	/* connect status change */
-#define RH_PS_PESC		0x00020000	/* port enable status change */
-#define RH_PS_PSSC		0x00040000	/* port suspend status change */
-#define RH_PS_OCIC		0x00080000	/* over current indicator change */
-#define RH_PS_PRSC		0x00100000	/* port reset status change */
-
-/* roothub.status bits */
-#define RH_HS_LPS		0x00000001	/* local power status */
-#define RH_HS_OCI		0x00000002	/* over current indicator */
-#define RH_HS_DRWE		0x00008000	/* device remote wakeup enable */
-#define RH_HS_LPSC		0x00010000	/* local power status change */
-#define RH_HS_OCIC		0x00020000	/* over current indicator change */
-#define RH_HS_CRWE		0x80000000	/* clear remote wakeup enable */
-
-/* roothub.b masks */
-#define RH_B_DR			0x0000ffff	/* device removable flags */
-#define RH_B_PPCM		0xffff0000	/* port power control mask */
-
-/* roothub.a masks */
-#define	RH_A_NDP		(0xff << 0)	/* number of downstream ports */
-#define	RH_A_PSM		(1 << 8)	/* power switching mode */
-#define	RH_A_NPS		(1 << 9)	/* no power switching */
-#define	RH_A_DT			(1 << 10)	/* device type (mbz) */
-#define	RH_A_OCPM		(1 << 11)	/* over current protection mode */
-#define	RH_A_NOCP		(1 << 12)	/* no over current protection */
-#define	RH_A_POTPGT		(0xff << 24)	/* power on to power good time */
-
-/* urb */
-#define N_URB_TD 48
-typedef struct
-{
-	ed_t *ed;
-	__u16 length;		/* number of tds associated with this request */
-	__u16 td_cnt;		/* number of tds already serviced */
-	int   state;
-	unsigned long pipe;
-	int actual_length;
-	td_t *td[N_URB_TD];	/* list pointer to all corresponding TDs associated with this request */
-} urb_priv_t;
-#define URB_DEL 1
-
-/*
- * This is the full ohci controller description
- *
- * Note how the "proper" USB information is just
- * a subset of what the full implementation needs. (Linus)
- */
-
-
-typedef struct ohci {
-	struct ohci_hcca *hcca;		/* hcca */
-	/*dma_addr_t hcca_dma;*/
-
-	int irq;
-	int disabled;			/* e.g. got a UE, we're hung */
-	int sleeping;
-	unsigned long flags;		/* for HC bugs */
-
-	struct ohci_regs *regs;		/* OHCI controller's memory */
-
-	ed_t *ed_rm_list[2];		/* lists of all endpoints to be removed */
-	ed_t *ed_bulktail;		/* last endpoint of bulk list */
-	ed_t *ed_controltail;		/* last endpoint of control list */
-	int intrstatus;
-	__u32 hc_control;		/* copy of the hc control reg */
-	struct usb_device *dev[32];
-	struct virt_root_hub rh;
-
-	const char	*slot_name;
-} ohci_t;
-
-#define NUM_EDS 8		/* num of preallocated endpoint descriptors */
-
-struct ohci_device {
-	ed_t	ed[NUM_EDS];
-	int ed_cnt;
-};
-
-/* hcd */
-/* endpoint */
-static int ep_link(ohci_t * ohci, ed_t * ed);
-static int ep_unlink(ohci_t * ohci, ed_t * ed);
-static ed_t * ep_add_ed(struct usb_device * usb_dev, unsigned long pipe);
-
-/*-------------------------------------------------------------------------*/
-
-/* we need more TDs than EDs */
-#define NUM_TD 64
-
-/* +1 so we can align the storage */
-td_t gtd[NUM_TD+1];
-/* pointers to aligned storage */
-td_t *ptd;
-
-/* TDs ... */
-static inline struct td *
-td_alloc (struct usb_device *usb_dev)
-{
-	int i;
-	struct td	*td;
-
-	td = NULL;
-	for (i = 0; i < NUM_TD; i++) {
-		if (ptd[i].usb_dev == NULL) {
-			td = &ptd[i];
-			td->usb_dev = usb_dev;
-			break;
-		}
-	}
-	return td;
-}
-
-static inline void
-ed_free (struct ed *ed)
-{
-	ed->usb_dev = NULL;
-}
diff --git a/cpu/mips/cache.S b/cpu/mips/cache.S
deleted file mode 100644
index ff4f11cf78..0000000000
--- a/cpu/mips/cache.S
+++ /dev/null
@@ -1,331 +0,0 @@
-/*
- *  Cache-handling routined for MIPS CPUs
- *
- *  Copyright (c) 2003	Wolfgang Denk <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/asm.h>
-#include <asm/regdef.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/cacheops.h>
-
-#define RA		t8
-
-/*
- * 16kB is the maximum size of instruction and data caches on MIPS 4K,
- * 64kB is on 4KE, 24K, 5K, etc. Set bigger size for convenience.
- *
- * Note that the above size is the maximum size of primary cache. U-Boot
- * doesn't have L2 cache support for now.
- */
-#define MIPS_MAX_CACHE_SIZE	0x10000
-
-#define INDEX_BASE	CKSEG0
-
-	.macro	cache_op op addr
-	.set	push
-	.set	noreorder
-	.set	mips3
-	cache	\op, 0(\addr)
-	.set	pop
-	.endm
-
-/*
- * cacheop macro to automate cache operations
- * first some helpers...
- */
-#define _mincache(size, maxsize) \
-   bltu  size,maxsize,9f ; \
-   move  size,maxsize ;    \
-9:
-
-#define _align(minaddr, maxaddr, linesize) \
-   .set noat ; \
-   subu  AT,linesize,1 ;   \
-   not   AT ;        \
-   and   minaddr,AT ;      \
-   addu  maxaddr,-1 ;      \
-   and   maxaddr,AT ;      \
-   .set at
-
-/* general operations */
-#define doop1(op1) \
-   cache op1,0(a0)
-#define doop2(op1, op2) \
-   cache op1,0(a0) ;    \
-   nop ;          \
-   cache op2,0(a0)
-
-/* specials for cache initialisation */
-#define doop1lw(op1) \
-   lw zero,0(a0)
-#define doop1lw1(op1) \
-   cache op1,0(a0) ;    \
-   lw zero,0(a0) ;      \
-   cache op1,0(a0)
-#define doop121(op1,op2) \
-   cache op1,0(a0) ;    \
-   nop;           \
-   cache op2,0(a0) ;    \
-   nop;           \
-   cache op1,0(a0)
-
-#define _oploopn(minaddr, maxaddr, linesize, tag, ops) \
-   .set  noreorder ;    \
-10:   doop##tag##ops ;  \
-   bne     minaddr,maxaddr,10b ; \
-   add      minaddr,linesize ;   \
-   .set  reorder
-
-/* finally the cache operation macros */
-#define vcacheopn(kva, n, cacheSize, cacheLineSize, tag, ops) \
-   blez  n,11f ;        \
-   addu  n,kva ;        \
-   _align(kva, n, cacheLineSize) ; \
-   _oploopn(kva, n, cacheLineSize, tag, ops) ; \
-11:
-
-#define icacheopn(kva, n, cacheSize, cacheLineSize, tag, ops) \
-   _mincache(n, cacheSize);   \
-   blez  n,11f ;        \
-   addu  n,kva ;        \
-   _align(kva, n, cacheLineSize) ; \
-   _oploopn(kva, n, cacheLineSize, tag, ops) ; \
-11:
-
-#define vcacheop(kva, n, cacheSize, cacheLineSize, op) \
-   vcacheopn(kva, n, cacheSize, cacheLineSize, 1, (op))
-
-#define icacheop(kva, n, cacheSize, cacheLineSize, op) \
-   icacheopn(kva, n, cacheSize, cacheLineSize, 1, (op))
-
-	.macro	f_fill64 dst, offset, val
-	LONG_S	\val, (\offset +  0 * LONGSIZE)(\dst)
-	LONG_S	\val, (\offset +  1 * LONGSIZE)(\dst)
-	LONG_S	\val, (\offset +  2 * LONGSIZE)(\dst)
-	LONG_S	\val, (\offset +  3 * LONGSIZE)(\dst)
-	LONG_S	\val, (\offset +  4 * LONGSIZE)(\dst)
-	LONG_S	\val, (\offset +  5 * LONGSIZE)(\dst)
-	LONG_S	\val, (\offset +  6 * LONGSIZE)(\dst)
-	LONG_S	\val, (\offset +  7 * LONGSIZE)(\dst)
-#if LONGSIZE == 4
-	LONG_S	\val, (\offset +  8 * LONGSIZE)(\dst)
-	LONG_S	\val, (\offset +  9 * LONGSIZE)(\dst)
-	LONG_S	\val, (\offset + 10 * LONGSIZE)(\dst)
-	LONG_S	\val, (\offset + 11 * LONGSIZE)(\dst)
-	LONG_S	\val, (\offset + 12 * LONGSIZE)(\dst)
-	LONG_S	\val, (\offset + 13 * LONGSIZE)(\dst)
-	LONG_S	\val, (\offset + 14 * LONGSIZE)(\dst)
-	LONG_S	\val, (\offset + 15 * LONGSIZE)(\dst)
-#endif
-	.endm
-
-/*
- * mips_init_icache(uint PRId, ulong icache_size, unchar icache_linesz)
- */
-LEAF(mips_init_icache)
-	blez	a1, 9f
-	mtc0	zero, CP0_TAGLO
-	/* clear tag to invalidate */
-	PTR_LI		t0, INDEX_BASE
-	PTR_ADDU	t1, t0, a1
-1:	cache_op	Index_Store_Tag_I t0
-	PTR_ADDU	t0, a2
-	bne		t0, t1, 1b
-	/* fill once, so data field parity is correct */
-	PTR_LI		t0, INDEX_BASE
-2:	cache_op	Fill t0
-	PTR_ADDU	t0, a2
-	bne		t0, t1, 2b
-	/* invalidate again - prudent but not strictly neccessary */
-	PTR_LI		t0, INDEX_BASE
-1:	cache_op	Index_Store_Tag_I t0
-	PTR_ADDU	t0, a2
-	bne		t0, t1, 1b
-9:	jr	ra
-	END(mips_init_icache)
-
-/*
- * mips_init_dcache(uint PRId, ulong dcache_size, unchar dcache_linesz)
- */
-LEAF(mips_init_dcache)
-	blez	a1, 9f
-	mtc0	zero, CP0_TAGLO
-	/* clear all tags */
-	PTR_LI		t0, INDEX_BASE
-	PTR_ADDU	t1, t0, a1
-1:	cache_op	Index_Store_Tag_D t0
-	PTR_ADDU	t0, a2
-	bne		t0, t1, 1b
-	/* load from each line (in cached space) */
-	PTR_LI		t0, INDEX_BASE
-2:	LONG_L		zero, 0(t0)
-	PTR_ADDU	t0, a2
-	bne		t0, t1, 2b
-	/* clear all tags */
-	PTR_LI		t0, INDEX_BASE
-1:	cache_op	Index_Store_Tag_D t0
-	PTR_ADDU	t0, a2
-	bne		t0, t1, 1b
-9:	jr	ra
-	END(mips_init_dcache)
-
-/*******************************************************************************
-*
-* mips_cache_reset - low level initialisation of the primary caches
-*
-* This routine initialises the primary caches to ensure that they
-* have good parity.  It must be called by the ROM before any cached locations
-* are used to prevent the possibility of data with bad parity being written to
-* memory.
-* To initialise the instruction cache it is essential that a source of data
-* with good parity is available. This routine
-* will initialise an area of memory starting at location zero to be used as
-* a source of parity.
-*
-* RETURNS: N/A
-*
-*/
-NESTED(mips_cache_reset, 0, ra)
-	move	RA, ra
-	li	t2, CONFIG_SYS_ICACHE_SIZE
-	li	t3, CONFIG_SYS_DCACHE_SIZE
-	li	t4, CONFIG_SYS_CACHELINE_SIZE
-	move	t5, t4
-
-	li	v0, MIPS_MAX_CACHE_SIZE
-
-	/*
-	 * Now clear that much memory starting from zero.
-	 */
-	PTR_LI		a0, CKSEG1
-	PTR_ADDU	a1, a0, v0
-2:	PTR_ADDIU	a0, 64
-	f_fill64	a0, -64, zero
-	bne		a0, a1, 2b
-
-	/*
-	 * The caches are probably in an indeterminate state,
-	 * so we force good parity into them by doing an
-	 * invalidate, load/fill, invalidate for each line.
-	 */
-
-	/*
-	 * Assume bottom of RAM will generate good parity for the cache.
-	 */
-
-	/*
-	 * Initialize the I-cache first,
-	 */
-	move	a1, t2
-	move	a2, t4
-	PTR_LA	t7, mips_init_icache
-	jalr	t7
-
-	/*
-	 * then initialize D-cache.
-	 */
-	move	a1, t3
-	move	a2, t5
-	PTR_LA	t7, mips_init_dcache
-	jalr	t7
-
-	jr	RA
-	END(mips_cache_reset)
-
-/*******************************************************************************
-*
-* dcache_status - get cache status
-*
-* RETURNS: 0 - cache disabled; 1 - cache enabled
-*
-*/
-LEAF(dcache_status)
-	mfc0	t0, CP0_CONFIG
-	li	t1, CONF_CM_UNCACHED
-	andi	t0, t0, CONF_CM_CMASK
-	move	v0, zero
-	beq	t0, t1, 2f
-	li	v0, 1
-2:	jr	ra
-	END(dcache_status)
-
-/*******************************************************************************
-*
-* dcache_disable - disable cache
-*
-* RETURNS: N/A
-*
-*/
-LEAF(dcache_disable)
-	mfc0	t0, CP0_CONFIG
-	li	t1, -8
-	and	t0, t0, t1
-	ori	t0, t0, CONF_CM_UNCACHED
-	mtc0	t0, CP0_CONFIG
-	jr	ra
-	END(dcache_disable)
-
-/*******************************************************************************
-*
-* dcache_enable - enable cache
-*
-* RETURNS: N/A
-*
-*/
-LEAF(dcache_enable)
-	mfc0	t0, CP0_CONFIG
-	ori	t0, CONF_CM_CMASK
-	xori	t0, CONF_CM_CMASK
-	ori	t0, CONF_CM_CACHABLE_NONCOHERENT
-	mtc0	t0, CP0_CONFIG
-	jr	ra
-	END(dcache_enable)
-
-#ifdef CONFIG_SYS_INIT_RAM_LOCK_MIPS
-/*******************************************************************************
-*
-* mips_cache_lock - lock RAM area pointed to by a0 in cache.
-*
-* RETURNS: N/A
-*
-*/
-#if defined(CONFIG_PURPLE)
-# define	CACHE_LOCK_SIZE	(CONFIG_SYS_DCACHE_SIZE/2)
-#else
-# define	CACHE_LOCK_SIZE	(CONFIG_SYS_DCACHE_SIZE)
-#endif
-	.globl	mips_cache_lock
-	.ent	mips_cache_lock
-mips_cache_lock:
-	li	a1, CKSEG0 - CACHE_LOCK_SIZE
-	addu	a0, a1
-	li	a2, CACHE_LOCK_SIZE
-	li	a3, CONFIG_SYS_CACHELINE_SIZE
-	move	a1, a2
-	icacheop(a0,a1,a2,a3,0x1d)
-
-	jr	ra
-
-	.end	mips_cache_lock
-#endif /* CONFIG_SYS_INIT_RAM_LOCK_MIPS */
diff --git a/cpu/mips/config.mk b/cpu/mips/config.mk
deleted file mode 100644
index a173c5480c..0000000000
--- a/cpu/mips/config.mk
+++ /dev/null
@@ -1,39 +0,0 @@
-#
-# (C) Copyright 2003
-# Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-v=$(shell $(AS) --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+' | cut -d. -f2)
-MIPSFLAGS:=$(shell \
-if [ "$v" -lt "14" ]; then \
-	echo "-mcpu=4kc"; \
-else \
-	echo "-march=4kc -mtune=4kc"; \
-fi)
-
-ifneq (,$(findstring 4KCle,$(CROSS_COMPILE)))
-ENDIANNESS = -EL
-else
-ENDIANNESS = -EB
-endif
-
-MIPSFLAGS += $(ENDIANNESS)
-
-PLATFORM_CPPFLAGS += $(MIPSFLAGS)
diff --git a/cpu/mips/cpu.c b/cpu/mips/cpu.c
deleted file mode 100644
index d5a16047de..0000000000
--- a/cpu/mips/cpu.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <netdev.h>
-#include <asm/mipsregs.h>
-#include <asm/cacheops.h>
-#include <asm/reboot.h>
-
-#define cache_op(op,addr)						\
-	__asm__ __volatile__(						\
-	"	.set	push					\n"	\
-	"	.set	noreorder				\n"	\
-	"	.set	mips3\n\t				\n"	\
-	"	cache	%0, %1					\n"	\
-	"	.set	pop					\n"	\
-	:								\
-	: "i" (op), "R" (*(unsigned char *)(addr)))
-
-void __attribute__((weak)) _machine_restart(void)
-{
-}
-
-int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	_machine_restart();
-
-	fprintf(stderr, "*** reset failed ***\n");
-	return 0;
-}
-
-void flush_cache(ulong start_addr, ulong size)
-{
-	unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE;
-	unsigned long addr = start_addr & ~(lsize - 1);
-	unsigned long aend = (start_addr + size - 1) & ~(lsize - 1);
-
-	while (1) {
-		cache_op(Hit_Writeback_Inv_D, addr);
-		cache_op(Hit_Invalidate_I, addr);
-		if (addr == aend)
-			break;
-		addr += lsize;
-	}
-}
-
-void flush_dcache_range(ulong start_addr, ulong stop)
-{
-	unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE;
-	unsigned long addr = start_addr & ~(lsize - 1);
-	unsigned long aend = (stop - 1) & ~(lsize - 1);
-
-	while (1) {
-		cache_op(Hit_Writeback_Inv_D, addr);
-		if (addr == aend)
-			break;
-		addr += lsize;
-	}
-}
-
-void invalidate_dcache_range(ulong start_addr, ulong stop)
-{
-	unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE;
-	unsigned long addr = start_addr & ~(lsize - 1);
-	unsigned long aend = (stop - 1) & ~(lsize - 1);
-
-	while (1) {
-		cache_op(Hit_Invalidate_D, addr);
-		if (addr == aend)
-			break;
-		addr += lsize;
-	}
-}
-
-void write_one_tlb(int index, u32 pagemask, u32 hi, u32 low0, u32 low1)
-{
-	write_c0_entrylo0(low0);
-	write_c0_pagemask(pagemask);
-	write_c0_entrylo1(low1);
-	write_c0_entryhi(hi);
-	write_c0_index(index);
-	tlb_write_indexed();
-}
-
-int cpu_eth_init(bd_t *bis)
-{
-#ifdef CONFIG_SOC_AU1X00
-	au1x00_enet_initialize(bis);
-#endif
-	return 0;
-}
diff --git a/cpu/mips/incaip_clock.c b/cpu/mips/incaip_clock.c
deleted file mode 100644
index fc2c62180b..0000000000
--- a/cpu/mips/incaip_clock.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/inca-ip.h>
-
-
-/*******************************************************************************
-*
-* get_cpuclk - returns the frequency of the CPU.
-*
-* Gets the value directly from the INCA-IP hardware.
-*
-* RETURNS:
-*          150.000.000 for 150 MHz
-*          133.333.333 for 133 MHz (= 400MHz/3)
-*          100.000.000 for 100 MHz (= 400MHz/4)
-* NOTE:
-*   This functions should be used by the hardware driver to get the correct
-*   frequency of the CPU. Don't use the macros, which are set to init the CPU
-*   frequency in the ROM code.
-*/
-uint incaip_get_cpuclk (void)
-{
-	/*-------------------------------------------------------------------------*/
-	/* CPU Clock Input Multiplexer (MUX I)                                     */
-	/* Multiplexer MUX I selects the maximum input clock to the CPU.           */
-	/*-------------------------------------------------------------------------*/
-	if (*((volatile ulong *) INCA_IP_CGU_CGU_MUXCR) &
-	    INCA_IP_CGU_CGU_MUXCR_MUXI) {
-		/* MUX I set to 150 MHz clock */
-		return 150000000;
-	} else {
-		/* MUX I set to 100/133 MHz clock */
-		if (*((volatile ulong *) INCA_IP_CGU_CGU_DIVCR) & 0x40) {
-			/* Division value is 1/3, maximum CPU operating */
-			/* frequency is 133.3 MHz                       */
-			return 133333333;
-		} else {
-			/* Division value is 1/4, maximum CPU operating */
-			/* frequency is 100 MHz                         */
-			return 100000000;
-		}
-	}
-}
-
-/*******************************************************************************
-*
-* get_fpiclk - returns the frequency of the FPI bus.
-*
-* Gets the value directly from the INCA-IP hardware.
-*
-* RETURNS: Frquency in Hz
-*
-* NOTE:
-*   This functions should be used by the hardware driver to get the correct
-*   frequency of the CPU. Don't use the macros, which are set to init the CPU
-*   frequency in the ROM code.
-*   The calculation for the
-*/
-uint incaip_get_fpiclk (void)
-{
-	uint clkCPU;
-
-	clkCPU = incaip_get_cpuclk ();
-
-	switch (*((volatile ulong *) INCA_IP_CGU_CGU_DIVCR) & 0xC) {
-	case 0x4:
-		return clkCPU >> 1;	/* devided by 2 */
-		break;
-	case 0x8:
-		return clkCPU >> 2;	/* devided by 4 */
-		break;
-	default:
-		return clkCPU;
-		break;
-	}
-}
-
-int incaip_set_cpuclk (void)
-{
-	extern void ebu_init(long);
-	extern void cgu_init(long);
-	extern void sdram_init(long);
-	char tmp[64];
-	ulong cpuclk;
-
-	if (getenv_r ("cpuclk", tmp, sizeof (tmp)) > 0) {
-		cpuclk = simple_strtoul (tmp, NULL, 10) * 1000000;
-		cgu_init (cpuclk);
-		ebu_init (cpuclk);
-		sdram_init (cpuclk);
-	}
-
-	return 0;
-}
diff --git a/cpu/mips/incaip_wdt.S b/cpu/mips/incaip_wdt.S
deleted file mode 100644
index 3ade3cd6fd..0000000000
--- a/cpu/mips/incaip_wdt.S
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- *  INCA-IP Watchdog timer management code.
- *
- *  Copyright (c) 2003	Wolfgang Denk <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <config.h>
-#include <asm/regdef.h>
-
-
-#define WD_BASE            0xb8000000
-#define WD_CON0(value)     0x0020(value)
-#define WD_CON1(value)     0x0024(value)
-#define WD_DISABLE         0x00000008
-#define WD_ENABLE          0x00000000
-#define WD_WRITE_PW        0xFFFC00F8
-#define WD_WRITE_ENDINIT   0xFFFC00F3
-#define WD_WRITE_INIT      0xFFFC00F2
-
-
-	.globl	disable_incaip_wdt
-disable_incaip_wdt:
-	li	t0, WD_BASE
-
-	/* Calculate password.
-	 */
-	lw	t2, WD_CON1(t0)
-	and	t2, 0xC
-
-	lw	t3, WD_CON0(t0)
-	and	t3, 0xFFFFFF01
-
-	or	t3, t2
-	or	t3, 0xF0
-
-	sw	t3, WD_CON0(t0)		/* write password */
-
-	/* Clear ENDINIT.
-	 */
-	li	t1, WD_WRITE_INIT
-	sw	t1, WD_CON0(t0)
-
-
-	li	t1, WD_DISABLE
-	sw	t1, WD_CON1(t0)		/* disable watchdog */
-	li	t1, WD_WRITE_PW
-	sw	t1, WD_CON0(t0)		/* write password */
-	li	t1, WD_WRITE_ENDINIT
-	sw	t1, WD_CON0(t0)		/* end command */
-
-	jr	ra
-	nop
diff --git a/cpu/mips/interrupts.c b/cpu/mips/interrupts.c
deleted file mode 100644
index 87f7a9f7e6..0000000000
--- a/cpu/mips/interrupts.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-void enable_interrupts(void)
-{
-}
-
-int disable_interrupts(void)
-{
-	return 0;
-}
diff --git a/cpu/mips/start.S b/cpu/mips/start.S
deleted file mode 100644
index 57db589b94..0000000000
--- a/cpu/mips/start.S
+++ /dev/null
@@ -1,421 +0,0 @@
-/*
- *  Startup Code for MIPS32 CPU-core
- *
- *  Copyright (c) 2003	Wolfgang Denk <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/regdef.h>
-#include <asm/mipsregs.h>
-
-	/*
-	 * For the moment disable interrupts, mark the kernel mode and
-	 * set ST0_KX so that the CPU does not spit fire when using
-	 * 64-bit addresses.
-	 */
-	.macro	setup_c0_status set clr
-	.set	push
-	mfc0	t0, CP0_STATUS
-	or	t0, ST0_CU0 | \set | 0x1f | \clr
-	xor	t0, 0x1f | \clr
-	mtc0	t0, CP0_STATUS
-	.set	noreorder
-	sll	zero, 3				# ehb
-	.set	pop
-	.endm
-
-	.macro	setup_c0_status_reset
-#ifdef CONFIG_64BIT
-	setup_c0_status ST0_KX 0
-#else
-	setup_c0_status 0 0
-#endif
-	.endm
-
-#define RVECENT(f,n) \
-   b f; nop
-#define XVECENT(f,bev) \
-   b f     ;           \
-   li k0,bev
-
-	.set noreorder
-
-	.globl _start
-	.text
-_start:
-	RVECENT(reset,0)	/* U-boot entry point */
-	RVECENT(reset,1)	/* software reboot */
-#if defined(CONFIG_INCA_IP)
-	.word INFINEON_EBU_BOOTCFG /* EBU init code, fetched during booting */
-	.word 0x00000000           /* phase of the flash                    */
-#elif defined(CONFIG_PURPLE)
-	.word INFINEON_EBU_BOOTCFG /* EBU init code, fetched during booting */
-	.word INFINEON_EBU_BOOTCFG /* EBU init code, fetched during booting */
-#else
-	RVECENT(romReserved,2)
-#endif
-	RVECENT(romReserved,3)
-	RVECENT(romReserved,4)
-	RVECENT(romReserved,5)
-	RVECENT(romReserved,6)
-	RVECENT(romReserved,7)
-	RVECENT(romReserved,8)
-	RVECENT(romReserved,9)
-	RVECENT(romReserved,10)
-	RVECENT(romReserved,11)
-	RVECENT(romReserved,12)
-	RVECENT(romReserved,13)
-	RVECENT(romReserved,14)
-	RVECENT(romReserved,15)
-	RVECENT(romReserved,16)
-	RVECENT(romReserved,17)
-	RVECENT(romReserved,18)
-	RVECENT(romReserved,19)
-	RVECENT(romReserved,20)
-	RVECENT(romReserved,21)
-	RVECENT(romReserved,22)
-	RVECENT(romReserved,23)
-	RVECENT(romReserved,24)
-	RVECENT(romReserved,25)
-	RVECENT(romReserved,26)
-	RVECENT(romReserved,27)
-	RVECENT(romReserved,28)
-	RVECENT(romReserved,29)
-	RVECENT(romReserved,30)
-	RVECENT(romReserved,31)
-	RVECENT(romReserved,32)
-	RVECENT(romReserved,33)
-	RVECENT(romReserved,34)
-	RVECENT(romReserved,35)
-	RVECENT(romReserved,36)
-	RVECENT(romReserved,37)
-	RVECENT(romReserved,38)
-	RVECENT(romReserved,39)
-	RVECENT(romReserved,40)
-	RVECENT(romReserved,41)
-	RVECENT(romReserved,42)
-	RVECENT(romReserved,43)
-	RVECENT(romReserved,44)
-	RVECENT(romReserved,45)
-	RVECENT(romReserved,46)
-	RVECENT(romReserved,47)
-	RVECENT(romReserved,48)
-	RVECENT(romReserved,49)
-	RVECENT(romReserved,50)
-	RVECENT(romReserved,51)
-	RVECENT(romReserved,52)
-	RVECENT(romReserved,53)
-	RVECENT(romReserved,54)
-	RVECENT(romReserved,55)
-	RVECENT(romReserved,56)
-	RVECENT(romReserved,57)
-	RVECENT(romReserved,58)
-	RVECENT(romReserved,59)
-	RVECENT(romReserved,60)
-	RVECENT(romReserved,61)
-	RVECENT(romReserved,62)
-	RVECENT(romReserved,63)
-	XVECENT(romExcHandle,0x200)	/* bfc00200: R4000 tlbmiss vector */
-	RVECENT(romReserved,65)
-	RVECENT(romReserved,66)
-	RVECENT(romReserved,67)
-	RVECENT(romReserved,68)
-	RVECENT(romReserved,69)
-	RVECENT(romReserved,70)
-	RVECENT(romReserved,71)
-	RVECENT(romReserved,72)
-	RVECENT(romReserved,73)
-	RVECENT(romReserved,74)
-	RVECENT(romReserved,75)
-	RVECENT(romReserved,76)
-	RVECENT(romReserved,77)
-	RVECENT(romReserved,78)
-	RVECENT(romReserved,79)
-	XVECENT(romExcHandle,0x280)	/* bfc00280: R4000 xtlbmiss vector */
-	RVECENT(romReserved,81)
-	RVECENT(romReserved,82)
-	RVECENT(romReserved,83)
-	RVECENT(romReserved,84)
-	RVECENT(romReserved,85)
-	RVECENT(romReserved,86)
-	RVECENT(romReserved,87)
-	RVECENT(romReserved,88)
-	RVECENT(romReserved,89)
-	RVECENT(romReserved,90)
-	RVECENT(romReserved,91)
-	RVECENT(romReserved,92)
-	RVECENT(romReserved,93)
-	RVECENT(romReserved,94)
-	RVECENT(romReserved,95)
-	XVECENT(romExcHandle,0x300)	/* bfc00300: R4000 cache vector */
-	RVECENT(romReserved,97)
-	RVECENT(romReserved,98)
-	RVECENT(romReserved,99)
-	RVECENT(romReserved,100)
-	RVECENT(romReserved,101)
-	RVECENT(romReserved,102)
-	RVECENT(romReserved,103)
-	RVECENT(romReserved,104)
-	RVECENT(romReserved,105)
-	RVECENT(romReserved,106)
-	RVECENT(romReserved,107)
-	RVECENT(romReserved,108)
-	RVECENT(romReserved,109)
-	RVECENT(romReserved,110)
-	RVECENT(romReserved,111)
-	XVECENT(romExcHandle,0x380)	/* bfc00380: R4000 general vector */
-	RVECENT(romReserved,113)
-	RVECENT(romReserved,114)
-	RVECENT(romReserved,115)
-	RVECENT(romReserved,116)
-	RVECENT(romReserved,116)
-	RVECENT(romReserved,118)
-	RVECENT(romReserved,119)
-	RVECENT(romReserved,120)
-	RVECENT(romReserved,121)
-	RVECENT(romReserved,122)
-	RVECENT(romReserved,123)
-	RVECENT(romReserved,124)
-	RVECENT(romReserved,125)
-	RVECENT(romReserved,126)
-	RVECENT(romReserved,127)
-
-	/* We hope there are no more reserved vectors!
-	 * 128 * 8 == 1024 == 0x400
-	 * so this is address R_VEC+0x400 == 0xbfc00400
-	 */
-#ifdef CONFIG_PURPLE
-/* 0xbfc00400 */
-	.word	0xdc870000
-	.word	0xfca70000
-	.word	0x20840008
-	.word	0x20a50008
-	.word	0x20c6ffff
-	.word	0x14c0fffa
-	.word	0x00000000
-	.word	0x03e00008
-	.word	0x00000000
-	.word	0x00000000
-/* 0xbfc00428 */
-	.word	0xdc870000
-	.word	0xfca70000
-	.word	0x20840008
-	.word	0x20a50008
-	.word	0x20c6ffff
-	.word	0x14c0fffa
-	.word	0x00000000
-	.word	0x03e00008
-	.word	0x00000000
-	.word	0x00000000
-#endif /* CONFIG_PURPLE */
-	.align 4
-reset:
-
-	/* Clear watch registers.
-	 */
-	mtc0	zero, CP0_WATCHLO
-	mtc0	zero, CP0_WATCHHI
-
-	/* WP(Watch Pending), SW0/1 should be cleared. */
-	mtc0	zero, CP0_CAUSE
-
-	setup_c0_status_reset
-
-	/* Init Timer */
-	mtc0	zero, CP0_COUNT
-	mtc0	zero, CP0_COMPARE
-
-#if !defined(CONFIG_SKIP_LOWLEVEL_INIT)
-	/* CONFIG0 register */
-	li	t0, CONF_CM_UNCACHED
-	mtc0	t0, CP0_CONFIG
-#endif /* !CONFIG_SKIP_LOWLEVEL_INIT */
-
-	/* Initialize $gp.
-	 */
-	bal	1f
-	nop
-	.word	_gp
-1:
-	lw	gp, 0(ra)
-
-#if !defined(CONFIG_SKIP_LOWLEVEL_INIT)
-	/* Initialize any external memory.
-	 */
-	la	t9, lowlevel_init
-	jalr	t9
-	nop
-
-	/* Initialize caches...
-	 */
-	la	t9, mips_cache_reset
-	jalr	t9
-	nop
-
-	/* ... and enable them.
-	 */
-	li	t0, CONF_CM_CACHABLE_NONCOHERENT
-	mtc0	t0, CP0_CONFIG
-#endif /* !CONFIG_SKIP_LOWLEVEL_INIT */
-
-	/* Set up temporary stack.
-	 */
-#ifdef CONFIG_SYS_INIT_RAM_LOCK_MIPS
-	li	a0, CONFIG_SYS_INIT_SP_OFFSET
-	la	t9, mips_cache_lock
-	jalr	t9
-	nop
-#endif
-
-	li	t0, CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET
-	la	sp, 0(t0)
-
-	la	t9, board_init_f
-	jr	t9
-	nop
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * a0 = addr_sp
- * a1 = gd
- * a2 = destination address
- */
-	.globl	relocate_code
-	.ent	relocate_code
-relocate_code:
-	move	sp, a0		/* Set new stack pointer	*/
-
-	li	t0, CONFIG_SYS_MONITOR_BASE
-	la	t3, in_ram
-	lw	t2, -12(t3)	/* t2 <-- uboot_end_data	*/
-	move	t1, a2
-	move	s2, a2		/* s2 <-- destination address	*/
-
-	/*
-	 * Fix $gp:
-	 *
-	 * New $gp = (Old $gp - CONFIG_SYS_MONITOR_BASE) + Destination Address
-	 */
-	move	t6, gp
-	sub	gp, CONFIG_SYS_MONITOR_BASE
-	add	gp, a2		/* gp now adjusted		*/
-	sub	s1, gp, t6	/* s1 <-- relocation offset	*/
-
-	/*
-	 * t0 = source address
-	 * t1 = target address
-	 * t2 = source end address
-	 */
-
-	/*
-	 * Save destination address and size for later usage in flush_cache()
-	 */
-	move	s0, a1		/* save gd in s0		*/
-	move	a0, t1		/* a0 <-- destination addr	*/
-	sub	a1, t2, t0	/* a1 <-- size			*/
-
-	/* On the purple board we copy the code earlier in a special way
-	 * in order to solve flash problems
-	 */
-#ifndef CONFIG_PURPLE
-1:
-	lw	t3, 0(t0)
-	sw	t3, 0(t1)
-	addu	t0, 4
-	ble	t0, t2, 1b
-	addu	t1, 4		/* delay slot			*/
-#endif
-
-	/* If caches were enabled, we would have to flush them here.
-	 */
-
-	/* a0 & a1 are already set up for flush_cache(start, size) */
-	la	t9, flush_cache
-	jalr	t9
-	nop
-
-	/* Jump to where we've relocated ourselves.
-	 */
-	addi	t0, s2, in_ram - _start
-	jr	t0
-	nop
-
-	.word	_gp
-	.word	_GLOBAL_OFFSET_TABLE_
-	.word	uboot_end_data
-	.word	uboot_end
-	.word	num_got_entries
-
-in_ram:
-	/*
-	 * Now we want to update GOT.
-	 *
-	 * GOT[0] is reserved. GOT[1] is also reserved for the dynamic object
-	 * generated by GNU ld. Skip these reserved entries from relocation.
-	 */
-	lw	t3, -4(t0)	/* t3 <-- num_got_entries	*/
-	lw	t4, -16(t0)	/* t4 <-- _GLOBAL_OFFSET_TABLE_	*/
-	lw	t5, -20(t0)	/* t5 <-- _gp	*/
-	sub	t4, t5		/* compute offset*/
-	add	t4, t4, gp	/* t4 now holds relocated _GLOBAL_OFFSET_TABLE_	*/
-	addi	t4, t4, 8	/* Skipping first two entries.	*/
-	li	t2, 2
-1:
-	lw	t1, 0(t4)
-	beqz	t1, 2f
-	add	t1, s1
-	sw	t1, 0(t4)
-2:
-	addi	t2, 1
-	blt	t2, t3, 1b
-	addi	t4, 4		/* delay slot			*/
-
-	/* Clear BSS.
-	 */
-	lw	t1, -12(t0)	/* t1 <-- uboot_end_data	*/
-	lw	t2, -8(t0)	/* t2 <-- uboot_end		*/
-	add	t1, s1		/* adjust pointers		*/
-	add	t2, s1
-
-	sub	t1, 4
-1:
-	addi	t1, 4
-	bltl	t1, t2, 1b
-	sw	zero, 0(t1)	/* delay slot			*/
-
-	move	a0, s0		/* a0 <-- gd			*/
-	la	t9, board_init_r
-	jr	t9
-	move	a1, s2		/* delay slot			*/
-
-	.end	relocate_code
-
-	/* Exception handlers.
-	 */
-romReserved:
-	b	romReserved
-
-romExcHandle:
-	b	romExcHandle