diff options
| author | wdenk <wdenk> | 2004-09-29 22:43:59 +0000 |
|---|---|---|
| committer | wdenk <wdenk> | 2004-09-29 22:43:59 +0000 |
| commit | a06752e36be7fc74b4a928026b63b1bf1764497e (patch) | |
| tree | b71ddbcee4e4cc03e8ea98738b605a1c3879a703 /cpu/ppc4xx | |
| parent | da93ed8147a000505ac7b7ed4e2fb50532596a3c (diff) | |
| download | talos-obmc-uboot-a06752e36be7fc74b4a928026b63b1bf1764497e.tar.gz talos-obmc-uboot-a06752e36be7fc74b4a928026b63b1bf1764497e.zip | |
* Patch by Sean Chang, 9 Aug 2004:
- Added I2C support for ML300.
- Added support for ML300 to read out its environment information
stored on the EEPROM.
- Added support to use board specific parameters as part of
U-Boot's environment information.
- Updated MLD files to support configuration for new features
above.
* Patches by Travis Sawyer, 5 Aug 2004:
- Remove incorrect bridge settings for eth group 6
- Add call to setup bridge in ppc_440x_eth_initialize
- Fix ppc_440x_eth_init to reset the phy only if its the
first time through, otherwise, just check the phy for the
autonegotiated speed/duplex. This allows the use of netconsole
- only print the speed/duplex the first time the phy is reset.
Diffstat (limited to 'cpu/ppc4xx')
| -rw-r--r-- | cpu/ppc4xx/440gx_enet.c | 23 |
1 files changed, 14 insertions, 9 deletions
diff --git a/cpu/ppc4xx/440gx_enet.c b/cpu/ppc4xx/440gx_enet.c index 54b25a56c5..1fa84be6e5 100644 --- a/cpu/ppc4xx/440gx_enet.c +++ b/cpu/ppc4xx/440gx_enet.c @@ -167,8 +167,6 @@ static void ppc_440x_eth_halt (struct eth_device *dev) /* EMAC RESET */ out32 (EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST); - hw_p->print_speed = 1; /* print speed message again next time */ - return; } @@ -241,11 +239,9 @@ int ppc_440x_eth_setup_bridge(int devnum, bd_t * bis) zmiifer |= ZMII_FER_SMII << ZMII_FER_V (0); zmiifer |= ZMII_FER_SMII << ZMII_FER_V (1); rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(2); - rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(3); bis->bi_phymode[0] = BI_PHYMODE_ZMII; bis->bi_phymode[1] = BI_PHYMODE_ZMII; bis->bi_phymode[2] = BI_PHYMODE_RGMII; - bis->bi_phymode[3] = BI_PHYMODE_RGMII; break; case 0: default: @@ -426,8 +422,12 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis) bis->bi_phynum[devnum] = reg; - /* Reset the phy */ - miiphy_reset (reg); + /* + * Reset the phy, only if its the first time through + * otherwise, just check the speeds & feeds + */ + if (hw_p->first_init == 0) { + miiphy_reset (reg); #if defined(CONFIG_440_GX) #if defined(CONFIG_CIS8201_PHY) @@ -456,9 +456,10 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis) } #endif #endif - /* Start/Restart autonegotiation */ - phy_setup_aneg (reg); - udelay (1000); + /* Start/Restart autonegotiation */ + phy_setup_aneg (reg); + udelay (1000); + } miiphy_read (reg, PHY_BMSR, ®_short); @@ -1167,6 +1168,10 @@ int ppc_440x_eth_initialize (bd_t * bis) bis->bi_phymode[2] = 2; bis->bi_phymode[3] = 2; +#if defined (CONFIG_440_GX) + ppc_440x_eth_setup_bridge(0, bis); +#endif + for (eth_num = 0; eth_num < EMAC_NUM_DEV; eth_num++) { /* See if we can actually bring up the interface, otherwise, skip it */ |
