sunxi: Remove board defconfig-s for specific Q8 tablet PCB-s

We now have generic q8_a?3_defconfig files for Q8 formfactor tablets with
an A13 / A23 / A33 SoC, there is no need for these PCB variant specific
defconfig-s and they only serve to confuse the user.

Note that in case of the forfun_q88db_defconfig and TZX-Q8-713B7_defconfig
for A13 based Q8 tablets there is not even a dts file for these in the
upstream kernel, which is all the more reason to remove them.

The generic q8_a?3_defconfig files have been tested on an Et_q8_v1_6,
Ippo_q8h_v1_2_a33_1024x600, Ippo_q8h_v1_2 and TZX-Q8-713B7 tablet, and the
forfun_q88db_defconfig is identical to q8_a13_tablet_defconfig.

This leaves only the Ippo_q8h_v5 untested with the new generic defconfigs
but there is no reason to assume that it will not work.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

6 files changed, 0 insertions, 136 deletions

diff --git a/configs/Et_q8_v1_6_defconfig b/configs/Et_q8_v1_6_defconfig
deleted file mode 100644
index 65b8e1a67b..0000000000
--- a/configs/Et_q8_v1_6_defconfig
+++ /dev/null
@@ -1,23 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_MACH_SUN8I_A33=y
-CONFIG_DRAM_CLK=480
-CONFIG_DRAM_ZQ=15291
-CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
-CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
-CONFIG_AXP_GPIO=y
-CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:168,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0"
-CONFIG_VIDEO_LCD_DCLK_PHASE=0
-CONFIG_VIDEO_LCD_POWER="PH7"
-CONFIG_VIDEO_LCD_BL_EN="PH6"
-CONFIG_VIDEO_LCD_BL_PWM="PH0"
-CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-et-q8-v1.6"
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_FPGA is not set
-CONFIG_AXP221_DLDO1_VOLT=3300
-CONFIG_AXP221_ALDO1_VOLT=3000
-CONFIG_USB_MUSB_HOST=y
diff --git a/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig b/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig
deleted file mode 100644
index 40ccf8fd92..0000000000
--- a/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig
+++ /dev/null
@@ -1,24 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_MACH_SUN8I_A33=y
-CONFIG_DRAM_CLK=480
-CONFIG_DRAM_ZQ=15291
-CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
-CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
-CONFIG_USB0_ID_DET="PH8"
-CONFIG_AXP_GPIO=y
-CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:51000,le:159,ri:160,up:22,lo:12,hs:1,vs:1,sync:3,vmode:0"
-CONFIG_VIDEO_LCD_DCLK_PHASE=0
-CONFIG_VIDEO_LCD_POWER="PH7"
-CONFIG_VIDEO_LCD_BL_EN="PH6"
-CONFIG_VIDEO_LCD_BL_PWM="PH0"
-CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ippo-q8h-v1.2"
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_FPGA is not set
-CONFIG_AXP221_DLDO1_VOLT=3300
-CONFIG_AXP221_ALDO1_VOLT=3000
-CONFIG_USB_MUSB_HOST=y
diff --git a/configs/Ippo_q8h_v1_2_defconfig b/configs/Ippo_q8h_v1_2_defconfig
deleted file mode 100644
index 5b49c446ed..0000000000
--- a/configs/Ippo_q8h_v1_2_defconfig
+++ /dev/null
@@ -1,24 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_MACH_SUN8I_A23=y
-CONFIG_DRAM_CLK=432
-CONFIG_DRAM_ZQ=63306
-CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
-CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
-CONFIG_USB0_ID_DET="PH8"
-CONFIG_AXP_GPIO=y
-CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:167,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0"
-CONFIG_VIDEO_LCD_DCLK_PHASE=0
-CONFIG_VIDEO_LCD_POWER="PH7"
-CONFIG_VIDEO_LCD_BL_EN="PH6"
-CONFIG_VIDEO_LCD_BL_PWM="PH0"
-CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v1.2"
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_FPGA is not set
-CONFIG_AXP221_DLDO1_VOLT=3300
-CONFIG_AXP221_ALDO1_VOLT=3000
-CONFIG_USB_MUSB_HOST=y
diff --git a/configs/Ippo_q8h_v5_defconfig b/configs/Ippo_q8h_v5_defconfig
deleted file mode 100644
index 53168604da..0000000000
--- a/configs/Ippo_q8h_v5_defconfig
+++ /dev/null
@@ -1,24 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_MACH_SUN8I_A23=y
-CONFIG_DRAM_CLK=480
-CONFIG_DRAM_ZQ=63351
-CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
-CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
-CONFIG_USB0_ID_DET="PH8"
-CONFIG_AXP_GPIO=y
-CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:168,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0"
-CONFIG_VIDEO_LCD_DCLK_PHASE=0
-CONFIG_VIDEO_LCD_POWER="PH7"
-CONFIG_VIDEO_LCD_BL_EN="PH6"
-CONFIG_VIDEO_LCD_BL_PWM="PH0"
-CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v5"
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_FPGA is not set
-CONFIG_AXP221_DLDO1_VOLT=3300
-CONFIG_AXP221_ALDO1_VOLT=3000
-CONFIG_USB_MUSB_HOST=y
diff --git a/configs/TZX-Q8-713B7_defconfig b/configs/TZX-Q8-713B7_defconfig
deleted file mode 100644
index f5e3574a90..0000000000
--- a/configs/TZX-Q8-713B7_defconfig
+++ /dev/null
@@ -1,21 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_MACH_SUN5I=y
-CONFIG_DRAM_CLK=408
-CONFIG_MMC0_CD_PIN="PG0"
-CONFIG_USB0_VBUS_PIN="PG12"
-CONFIG_USB0_VBUS_DET="PG1"
-CONFIG_AXP_GPIO=y
-# CONFIG_VIDEO_HDMI is not set
-CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:40,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0"
-CONFIG_VIDEO_LCD_POWER="AXP0-0"
-CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
-CONFIG_VIDEO_LCD_BL_PWM="PB2"
-CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-tzx-q8-713b7"
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER"
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_FPGA is not set
-CONFIG_USB_MUSB_HOST=y
diff --git a/configs/forfun_q88db_defconfig b/configs/forfun_q88db_defconfig
deleted file mode 100644
index 30e09370e6..0000000000
--- a/configs/forfun_q88db_defconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_MACH_SUN5I=y
-CONFIG_DRAM_CLK=384
-CONFIG_USB0_VBUS_PIN="PG12"
-CONFIG_USB0_VBUS_DET="PG1"
-CONFIG_AXP_GPIO=y
-# CONFIG_VIDEO_HDMI is not set
-CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:40,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0"
-CONFIG_VIDEO_LCD_POWER="AXP0-0"
-CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
-CONFIG_VIDEO_LCD_BL_PWM="PB2"
-CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-forfun-q88db"
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER"
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_FPGA is not set
-CONFIG_USB_MUSB_HOST=y