Initial revision

8 files changed, 1608 insertions, 0 deletions

diff --git a/board/hymod/global_env b/board/hymod/global_env
new file mode 100644
index 0000000000..913f82db08
--- /dev/null
+++ b/board/hymod/global_env
@@ -0,0 +1,69 @@
+# format of this file is:
+#
+#	1. blank lines and lines beginning with '#' are ignored
+#	2. all other lines must have the form <name>=<value>
+#	3. if a percent appears anywhere, it is replaced like so:
+#
+#		%s	serial number of the main board (10 digit zero filled)
+#		%S	serial number of the main board (plain number)
+#		%%	a percentage character
+#
+# no whitespace is removed in either <name> or <value>
+#
+# if first character in <name> is a dash ('-'), then an existing env var
+# will not be overwritten (the dash is removed).
+#
+# if last character in <name> is a plus ('+'), then <value> will be appended
+# to any existing env var (the plus is removed). Duplicates of <value> are
+# removed.
+#
+
+# set the ip address based on the main board serial number
+ipaddr=192.168.1.%S
+serverip=192.168.1.254
+
+# stop auto execute after tftp
+autostart=no
+
+#
+# 16M flash map, 64 x 256K sectors, mapped at address 0x40000000
+#
+# sector 0:	boot
+# sector 1:	non volatile environment
+# sectors 2-4:	linux kernel image
+# sectors 5-7:	alternate linux kernel image
+# sectors 8-63:	linux initial ramdisk image
+#
+
+fetchboot=tftp 100000 /hymod/u-boot.bin
+eraseboot=protect off 1:0 ; erase 1:0 ; protect on 1:0
+copyboot=protect off 1:0 ; cp.b 100000 40000000 40000 ; protect on 1:0
+cmpboot=cmp.b 100000 40000000 40000
+newboot=run fetchboot eraseboot copyboot cmpboot
+
+fetchlinux=tftp 100000 /hymod/linux.bin
+eraselinux=erase 1:2-4
+copylinux=cp.b 100000 40080000 $(filesize)
+cmplinux=cmp.b 100000 40080000 $(filesize)
+newlinux=run fetchlinux eraselinux copylinux cmplinux
+
+fetchaltlinux=tftp 100000 /hymod/altlinux.bin
+erasealtlinux=erase 1:5-7
+copyaltlinux=cp.b 100000 40080000 $(filesize)
+cmpaltlinux=cmp.b 100000 40080000 $(filesize)
+newaltlinux=run fetchaltlinux erasealtlinux copyaltlinux cmpaltlinux
+
+fetchird=tftp 100000 /hymod/initrd.bin
+eraseird=erase 1:8-63
+copyird=cp.b 100000 40200000 $(filesize)
+cmpird=cmp.b 100000 40200000 $(filesize)
+newinitrd=run fetchird eraseird copyird cmpird
+
+bootcmd=bootm 40080000 40200000
+-bootargs=root=/dev/ram rw
+# these are for hymod linux
+bootargs+=preload=unix,i2c-cpm,i2c-dev
+bootargs+=serialno=%S
+bootargs+=ramdisk_size=32768
+bootargs+=automount nisclient nisdomain=mlb.dmt.csiro.au nissrvadr=138.194.112.4
+bootdelay=2
diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c
new file mode 100644
index 0000000000..e797b36281
--- /dev/null
+++ b/board/lwmon/lwmon.c
@@ -0,0 +1,966 @@
+/***********************************************************************
+ *
+M* Modul:         lwmon.c
+M*
+M* Content:       LWMON specific U-Boot commands.
+ *
+ * (C) Copyright 2001, 2002
+ * DENX Software Engineering
+ * Wolfgang Denk, wd@denx.de
+ * All rights reserved.
+ *
+D* Design:        wd@denx.de
+C* Coding:        wd@denx.de
+V* Verification:  dzu@denx.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ***********************************************************************/
+
+/*---------------------------- Headerfiles ----------------------------*/
+#include <common.h>
+#include <mpc8xx.h>
+#include <commproc.h>
+#include <i2c.h>
+#include <command.h>
+#include <cmd_bsp.h>
+#include <malloc.h>
+#include <post.h>
+
+#include <linux/types.h>
+#include <linux/string.h>	/* for strdup */
+
+/*------------------------ Local prototypes ---------------------------*/
+static long int dram_size (long int, long int *, long int);
+
+
+/*--------------------- Local macros and constants --------------------*/
+#define	_NOT_USED_	0xFFFFFFFF
+
+/*
+ * 66 MHz SDRAM access using UPM A
+ */
+const uint sdram_table[] =
+{
+#if defined(CFG_MEMORY_75) || defined(CFG_MEMORY_8E)
+	/*
+	 * Single Read. (Offset 0 in UPM RAM)
+	 */
+	0x1F0DFC04, 0xEEAFBC04, 0x11AF7C04, 0xEFBAFC00,
+	0x1FF5FC47, /* last */
+	/*
+	 * SDRAM Initialization (offset 5 in UPM RAM)
+	 *
+         * This is no UPM entry point. The following definition uses
+         * the remaining space to establish an initialization
+         * sequence, which is executed by a RUN command.
+	 *
+	 */
+		    0x1FF5FC34, 0xEFEABC34, 0x1FB57C35, /* last */
+	/*
+	 * Burst Read. (Offset 8 in UPM RAM)
+	 */
+	0x1F0DFC04, 0xEEAFBC04, 0x10AF7C04, 0xF0AFFC00,
+	0xF0AFFC00, 0xF1AFFC00, 0xEFBAFC00, 0x1FF5FC47, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Single Write. (Offset 18 in UPM RAM)
+	 */
+	0x1F2DFC04, 0xEEABBC00, 0x01B27C04, 0x1FF5FC47, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Burst Write. (Offset 20 in UPM RAM)
+	 */
+	0x1F0DFC04, 0xEEABBC00, 0x10A77C00, 0xF0AFFC00,
+	0xF0AFFC00, 0xE1BAFC04, 0x01FF5FC47, /* last */
+					    _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Refresh  (Offset 30 in UPM RAM)
+	 */
+	0x1FFD7C84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
+	0xFFFFFC84, 0xFFFFFC07, /* last */
+				_NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Exception. (Offset 3c in UPM RAM)
+	 */
+	0x7FFFFC07, /* last */
+		    0xFFFFFCFF, 0xFFFFFCFF, 0xFFFFFCFF,
+#endif
+#ifdef CFG_MEMORY_7E
+	/*
+	 * Single Read. (Offset 0 in UPM RAM)
+	 */
+	0x0E2DBC04, 0x11AF7C04, 0xEFBAFC00, 0x1FF5FC47, /* last */
+	_NOT_USED_,
+	/*
+	 * SDRAM Initialization (offset 5 in UPM RAM)
+	 *
+         * This is no UPM entry point. The following definition uses
+         * the remaining space to establish an initialization
+         * sequence, which is executed by a RUN command.
+	 *
+	 */
+		    0x1FF5FC34, 0xEFEABC34, 0x1FB57C35, /* last */
+	/*
+	 * Burst Read. (Offset 8 in UPM RAM)
+	 */
+	0x0E2DBC04, 0x10AF7C04, 0xF0AFFC00, 0xF0AFFC00,
+	0xF1AFFC00, 0xEFBAFC00, 0x1FF5FC47, /* last */
+				 	    _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Single Write. (Offset 18 in UPM RAM)
+	 */
+	0x0E29BC04, 0x01B27C04, 0x1FF5FC47, /* last */
+					    _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Burst Write. (Offset 20 in UPM RAM)
+	 */
+	0x0E29BC04, 0x10A77C00, 0xF0AFFC00, 0xF0AFFC00,
+	0xE1BAFC04, 0x1FF5FC47, /* last */
+			        _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Refresh  (Offset 30 in UPM RAM)
+	 */
+	0x1FFD7C84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
+	0xFFFFFC84, 0xFFFFFC07, /* last */
+				_NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Exception. (Offset 3c in UPM RAM)
+	 */
+	0x7FFFFC07, /* last */
+		    0xFFFFFCFF, 0xFFFFFCFF, 0xFFFFFCFF,
+#endif
+};
+
+/*
+ * Check Board Identity:
+ *
+ */
+
+/***********************************************************************
+F* Function:     int checkboard (void) P*A*Z*
+ *
+P* Parameters:   none
+P*
+P* Returnvalue:  int - 0 is always returned
+ *
+Z* Intention:    This function is the checkboard() method implementation
+Z*               for the lwmon board.  Only a standard message is printed.
+ *
+D* Design:       wd@denx.de
+C* Coding:       wd@denx.de
+V* Verification: dzu@denx.de
+ ***********************************************************************/
+int checkboard (void)
+{
+	puts ("Board: Litronic Monitor IV\n");
+	return (0);
+}
+
+/***********************************************************************
+F* Function:     long int initdram (int board_type) P*A*Z*
+ *
+P* Parameters:   int board_type
+P*                - Usually type of the board - ignored here.
+P*
+P* Returnvalue:  long int
+P*                - Size of initialized memory
+ *
+Z* Intention:    This function is the initdram() method implementation
+Z*               for the lwmon board.
+Z*               The memory controller is initialized to access the
+Z*               DRAM.
+ *
+D* Design:       wd@denx.de
+C* Coding:       wd@denx.de
+V* Verification: dzu@denx.de
+ ***********************************************************************/
+long int initdram (int board_type)
+{
+	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immr->im_memctl;
+	long int size_b0;
+	long int size8, size9;
+	int i;
+
+	/*
+	 * Configure UPMA for SDRAM
+	 */
+	upmconfig (UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
+
+	memctl->memc_mptpr = CFG_MPTPR;
+
+	/* burst length=4, burst type=sequential, CAS latency=2 */
+	memctl->memc_mar = CFG_MAR;
+
+	/*
+	 * Map controller bank 3 to the SDRAM bank at preliminary address.
+	 */
+	memctl->memc_or3 = CFG_OR3_PRELIM;
+	memctl->memc_br3 = CFG_BR3_PRELIM;
+
+	/* initialize memory address register */
+	memctl->memc_mamr = CFG_MAMR_8COL;	/* refresh not enabled yet */
+
+	/* mode initialization (offset 5) */
+	udelay (200);				/* 0x80006105 */
+	memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x05);
+
+	/* run 2 refresh sequence with 4-beat refresh burst (offset 0x30) */
+	udelay (1);				/* 0x80006130 */
+	memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x30);
+	udelay (1);				/* 0x80006130 */
+	memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x30);
+
+	udelay (1);				/* 0x80006106 */
+	memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x06);
+
+	memctl->memc_mamr |= MAMR_PTBE;	/* refresh enabled */
+
+	udelay (200);
+
+	/* Need at least 10 DRAM accesses to stabilize */
+	for (i = 0; i < 10; ++i) {
+		volatile unsigned long *addr =
+			(volatile unsigned long *) SDRAM_BASE3_PRELIM;
+		unsigned long val;
+
+		val = *(addr + i);
+		*(addr + i) = val;
+	}
+
+	/*
+	 * Check Bank 0 Memory Size for re-configuration
+	 *
+	 * try 8 column mode
+	 */
+	size8 = dram_size (CFG_MAMR_8COL, (ulong *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
+
+	udelay (1000);
+
+	/*
+	 * try 9 column mode
+	 */
+	size9 = dram_size (CFG_MAMR_9COL, (ulong *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
+
+	if (size8 < size9) {		/* leave configuration at 9 columns */
+		size_b0 = size9;
+		memctl->memc_mamr = CFG_MAMR_9COL | MAMR_PTBE;
+		udelay (500);
+	} else {			/* back to 8 columns            */
+		size_b0 = size8;
+		memctl->memc_mamr = CFG_MAMR_8COL | MAMR_PTBE;
+		udelay (500);
+	}
+
+	/*
+	 * Final mapping:
+	 */
+
+	memctl->memc_or3 = ((-size_b0) & 0xFFFF0000) |
+			OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING;
+	memctl->memc_br3 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+	udelay (1000);
+
+	return (size_b0);
+}
+
+/***********************************************************************
+F* Function:     static long int dram_size (long int mamr_value,
+F*                                          long int *base,
+F*                                          long int maxsize) P*A*Z*
+ *
+P* Parameters:   long int mamr_value
+P*                - Value for MAMR for the test
+P*               long int *base
+P*                - Base address for the test
+P*               long int maxsize
+P*                - Maximum size to test for
+P*
+P* Returnvalue:  long int
+P*                - Size of probed memory
+ *
+Z* Intention:    Check memory range for valid RAM. A simple memory test
+Z*               determines the actually available RAM size between
+Z*               addresses `base' and `base + maxsize'. Some (not all)
+Z*               hardware errors are detected:
+Z*                - short between address lines
+Z*                - short between data lines
+ *
+D* Design:       wd@denx.de
+C* Coding:       wd@denx.de
+V* Verification: dzu@denx.de
+ ***********************************************************************/
+static long int dram_size (long int mamr_value, long int *base, long int maxsize)
+{
+	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immr->im_memctl;
+	volatile long int *addr;
+	ulong cnt, val;
+	ulong save[32];				/* to make test non-destructive */
+	unsigned char i = 0;
+
+	memctl->memc_mamr = mamr_value;
+
+	for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
+		addr = base + cnt;		/* pointer arith! */
+
+		save[i++] = *addr;
+		*addr = ~cnt;
+	}
+
+	/* write 0 to base address */
+	addr = base;
+	save[i] = *addr;
+	*addr = 0;
+
+	/* check at base address */
+	if ((val = *addr) != 0) {
+		*addr = save[i];
+		return (0);
+	}
+
+	for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
+		addr = base + cnt;		/* pointer arith! */
+
+		val = *addr;
+		*addr = save[--i];
+
+		if (val != (~cnt)) {
+			return (cnt * sizeof (long));
+		}
+	}
+	return (maxsize);
+}
+
+/* ------------------------------------------------------------------------- */
+
+#ifndef	PB_ENET_TENA
+# define PB_ENET_TENA	((uint)0x00002000)	/* PB 18 */
+#endif
+
+/***********************************************************************
+F* Function:     int board_pre_init (void) P*A*Z*
+ *
+P* Parameters:   none
+P*
+P* Returnvalue:  int
+P*                - 0 is always returned.
+ *
+Z* Intention:    This function is the board_pre_init() method implementation
+Z*               for the lwmon board.
+Z*               Disable Ethernet TENA on Port B.
+ *
+D* Design:       wd@denx.de
+C* Coding:       wd@denx.de
+V* Verification: dzu@denx.de
+ ***********************************************************************/
+int board_pre_init (void)
+{
+	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+
+	/* Disable Ethernet TENA on Port B
+	 * Necessary because of pull up in COM3 port.
+	 *
+	 * This is just a preliminary fix, intended to turn off TENA
+	 * as soon as possible to avoid noise on the network. Once
+	 * I²C is running we will make sure the interface is
+	 * correctly initialized.
+	 */
+	immr->im_cpm.cp_pbpar &= ~PB_ENET_TENA;
+	immr->im_cpm.cp_pbodr &= ~PB_ENET_TENA;
+	immr->im_cpm.cp_pbdat &= ~PB_ENET_TENA;	/* set to 0 = disabled */
+	immr->im_cpm.cp_pbdir |= PB_ENET_TENA;
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/***********************************************************************
+F* Function:     void reset_phy (void) P*A*Z*
+ *
+P* Parameters:   none
+P*
+P* Returnvalue:  none
+ *
+Z* Intention:    Reset the PHY.  In the lwmon case we do this by the
+Z*               signaling the PIC I/O expander.
+ *
+D* Design:       wd@denx.de
+C* Coding:       wd@denx.de
+V* Verification: dzu@denx.de
+ ***********************************************************************/
+void reset_phy (void)
+{
+	uchar c;
+
+#ifdef DEBUG
+	printf ("### Switch on Ethernet for SCC2 ###\n");
+#endif
+	c = pic_read (0x61);
+#ifdef DEBUG
+	printf ("Old PIC read: reg_61 = 0x%02x\n", c);
+#endif
+	c |= 0x40;					/* disable COM3 */
+	c &= ~0x80;					/* enable Ethernet */
+	pic_write (0x61, c);
+#ifdef DEBUG
+	c = pic_read (0x61);
+	printf ("New PIC read: reg_61 = 0x%02x\n", c);
+#endif
+	udelay (1000);
+}
+
+
+/*------------------------- Keyboard controller -----------------------*/
+/* command codes */
+#define	KEYBD_CMD_READ_KEYS	0x01
+#define KEYBD_CMD_READ_VERSION	0x02
+#define KEYBD_CMD_READ_STATUS	0x03
+#define KEYBD_CMD_RESET_ERRORS	0x10
+
+/* status codes */
+#define KEYBD_STATUS_MASK	0x3F
+#define	KEYBD_STATUS_H_RESET	0x20
+#define KEYBD_STATUS_BROWNOUT	0x10
+#define KEYBD_STATUS_WD_RESET	0x08
+#define KEYBD_STATUS_OVERLOAD	0x04
+#define KEYBD_STATUS_ILLEGAL_WR	0x02
+#define KEYBD_STATUS_ILLEGAL_RD	0x01
+
+/* Number of bytes returned from Keyboard Controller */
+#define KEYBD_VERSIONLEN	2	/* version information */
+#define	KEYBD_DATALEN		9	/* normal key scan data */
+
+/* maximum number of "magic" key codes that can be assigned */
+
+static uchar kbd_addr = CFG_I2C_KEYBD_ADDR;
+
+static uchar *key_match (uchar *);
+
+#define	KEYBD_SET_DEBUGMODE	'#'	/* Magic key to enable debug output */
+
+/***********************************************************************
+F* Function:     int misc_init_r (void) P*A*Z*
+ *
+P* Parameters:   none
+P*
+P* Returnvalue:  int
+P*                - 0 is always returned, even in the case of a keyboard
+P*                    error.
+ *
+Z* Intention:    This function is the misc_init_r() method implementation
+Z*               for the lwmon board.
+Z*               The keyboard controller is initialized and the result
+Z*               of a read copied to the environment variable "keybd".
+Z*               If KEYBD_SET_DEBUGMODE is defined, a check is made for
+Z*               this key, and if found display to the LCD will be enabled.
+Z*               The keys in "keybd" are checked against the magic
+Z*               keycommands defined in the environment.
+Z*               See also key_match().
+ *
+D* Design:       wd@denx.de
+C* Coding:       wd@denx.de
+V* Verification: dzu@denx.de
+ ***********************************************************************/
+int misc_init_r (void)
+{
+	uchar kbd_data[KEYBD_DATALEN];
+	uchar tmp_data[KEYBD_DATALEN];
+	uchar keybd_env[2 * KEYBD_DATALEN + 1];
+	uchar val, errcd;
+	uchar *str;
+	int i;
+
+	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+
+	/* Read initial keyboard error code */
+	val = KEYBD_CMD_READ_STATUS;
+	i2c_write (kbd_addr, 0, 0, &val, 1);
+	i2c_read (kbd_addr, 0, 0, &errcd, 1);
+	/* clear unused bits */
+	errcd &= KEYBD_STATUS_MASK;
+	/* clear "irrelevant" bits. Recommended by Martin Rajek, LWN */
+	errcd &= ~(KEYBD_STATUS_H_RESET|KEYBD_STATUS_BROWNOUT);
+	if (errcd) {
+		printf ("KEYBD: Error %02X\n", errcd);
+	}
+	/* Reset error code and verify */
+	val = KEYBD_CMD_RESET_ERRORS;
+	i2c_write (kbd_addr, 0, 0, &val, 1);
+	udelay(1000);	/* delay NEEDED by keyboard PIC !!! */
+
+	val = KEYBD_CMD_READ_STATUS;
+	i2c_write (kbd_addr, 0, 0, &val, 1);
+	i2c_read (kbd_addr, 0, 0, &val, 1);
+
+	val &= KEYBD_STATUS_MASK;	/* clear unused bits */
+	if (val) {			/* permanent error, report it */
+		printf ("*** Keyboard error code %02X ***\n", val);
+		sprintf (keybd_env, "%02X", val);
+		setenv ("keybd", keybd_env);
+		return 0;
+	}
+
+	/*
+	 * Now we know that we have a working  keyboard,  so  disable
+	 * all output to the LCD except when a key press is detected.
+	 */
+
+	if ((console_assign (stdout, "serial") < 0) ||
+		(console_assign (stderr, "serial") < 0)) {
+		printf ("Can't assign serial port as output device\n");
+	}
+
+	/* Read Version */
+	val = KEYBD_CMD_READ_VERSION;
+	i2c_write (kbd_addr, 0, 0, &val, 1);
+	i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_VERSIONLEN);
+	printf ("KEYBD: Version %d.%d\n", kbd_data[0], kbd_data[1]);
+
+	/*
+	 * Read current keyboard state.
+	 *
+         * After the error reset it may take some time before the
+         * keyboard PIC picks up a valid keyboard scan - the total
+         * scan time is approx. 1.6 ms (information by Martin Rajek,
+         * 28 Sep 2002). We read a couple of times for the keyboard
+         * to stabilize, using a big enough delay.
+         * 10 times should be enough. If the data is still changing,
+         * we use what we get :-(
+	 */
+
+	memset (tmp_data, 0xFF, KEYBD_DATALEN);	/* impossible value */
+	for (i=0; i<10; ++i) {
+		val = KEYBD_CMD_READ_KEYS;
+		i2c_write (kbd_addr, 0, 0, &val, 1);
+		i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN);
+
+		if (memcmp(kbd_data, tmp_data, KEYBD_DATALEN) == 0) {
+			/* consistent state, done */
+			break;
+		}
+		/* remeber last state, delay, and retry */
+		memcpy (tmp_data, kbd_data, KEYBD_DATALEN);
+		udelay (5000);
+	}
+
+	for (i = 0; i < KEYBD_DATALEN; ++i) {
+		sprintf (keybd_env + i + i, "%02X", kbd_data[i]);
+	}
+	setenv ("keybd", keybd_env);
+
+	str = strdup (key_match (kbd_data));	/* decode keys */
+#ifdef KEYBD_SET_DEBUGMODE
+	if (kbd_data[0] == KEYBD_SET_DEBUGMODE) {	/* set debug mode */
+		if ((console_assign (stdout, "lcd") < 0) ||
+			(console_assign (stderr, "lcd") < 0)) {
+			printf ("Can't assign LCD display as output device\n");
+		}
+	}
+#endif /* KEYBD_SET_DEBUGMODE */
+#ifdef CONFIG_PREBOOT	/* automatically configure "preboot" command on key match */
+	setenv ("preboot", str);	/* set or delete definition */
+#endif /* CONFIG_PREBOOT */
+	if (str != NULL) {
+		free (str);
+	}
+	return (0);
+}
+
+#ifdef CONFIG_PREBOOT
+
+static uchar kbd_magic_prefix[] = "key_magic";
+static uchar kbd_command_prefix[] = "key_cmd";
+
+/***********************************************************************
+F* Function:     static uchar *key_match (uchar *kbd_data) P*A*Z*
+ *
+P* Parameters:   uchar *kbd_data
+P*                - The keys to match against our magic definitions
+P*
+P* Returnvalue:  uchar *
+P*                - != NULL: Pointer to the corresponding command(s)
+P*                     NULL: No magic is about to happen
+ *
+Z* Intention:    Check if pressed key(s) match magic sequence,
+Z*               and return the command string associated with that key(s).
+Z*
+Z*               If no key press was decoded, NULL is returned.
+Z*
+Z*               Note: the first character of the argument will be
+Z*                     overwritten with the "magic charcter code" of the
+Z*                     decoded key(s), or '\0'.
+Z*
+Z*               Note: the string points to static environment data
+Z*                     and must be saved before you call any function that
+Z*                     modifies the environment.
+ *
+D* Design:       wd@denx.de
+C* Coding:       wd@denx.de
+V* Verification: dzu@denx.de
+ ***********************************************************************/
+static uchar *key_match (uchar *kbd_data)
+{
+	uchar compare[KEYBD_DATALEN-1];
+	uchar magic[sizeof (kbd_magic_prefix) + 1];
+	uchar extra;
+	uchar *str, *nxt, *suffix;
+	uchar *kbd_magic_keys;
+	int i;
+
+	/*
+	 * The following string defines the characters that can pe appended
+	 * to "key_magic" to form the names of environment variables that
+	 * hold "magic" key codes, i. e. such key codes that can cause
+	 * pre-boot actions. If the string is empty (""), then only
+	 * "key_magic" is checked (old behaviour); the string "125" causes
+	 * checks for "key_magic1", "key_magic2" and "key_magic5", etc.
+	 */
+	if ((kbd_magic_keys = getenv ("magic_keys")) == NULL)
+		kbd_magic_keys = "";
+
+	/* loop over all magic keys;
+	 * use '\0' suffix in case of empty string
+	 */
+	for (suffix=kbd_magic_keys; *suffix || suffix==kbd_magic_keys; ++suffix) {
+		sprintf (magic, "%s%c", kbd_magic_prefix, *suffix);
+#if 0
+		printf ("### Check magic \"%s\"\n", magic);
+#endif
+		/* Don't include modifier byte */
+		memcpy (compare, kbd_data+1, KEYBD_DATALEN-1);
+
+		extra = 0;
+
+		for (str= getenv(magic); str != NULL; str = (*nxt) ? nxt+1 : nxt) {
+			uchar c;
+			int k;
+
+			c = (uchar) simple_strtoul (str, (char **) (&nxt), 16);
+
+			if (str == nxt) {	/* invalid character */
+				break;
+			}
+
+			/*
+			 * Check if this key matches the input.
+			 * Set matches to zero, so they match only once
+			 * and we can find duplicates or extra keys
+			 */
+			for (k = 0; k < sizeof(compare); ++k) {
+				if (compare[k] == '\0')	/* only non-zero entries */
+					continue;
+				if (c == compare[k]) {	/* found matching key */
+					compare[k] = '\0';
+					break;
+				}
+			}
+			if (k == sizeof(compare)) {
+				extra = 1;		/* unmatched key */
+			}
+		}
+
+		/*
+		 * A full match leaves no keys in the `compare' array,
+		 * and has no extra keys
+		 */
+
+		for (i = 0; i < sizeof(compare); ++i) {
+			if (compare[i])
+				break;
+		}
+
+		if ((i == sizeof(compare)) && (extra == 0)) {
+			uchar cmd_name[sizeof (kbd_command_prefix) + 1];
+			char *cmd;
+
+			sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix);
+
+			cmd = getenv (cmd_name);
+#if 0
+			printf ("### Set PREBOOT to $(%s): \"%s\"\n",
+					cmd_name, cmd ? cmd : "<<NULL>>");
+#endif
+			*kbd_data = *suffix;
+			return (cmd);
+		}
+	}
+#if 0
+	printf ("### Delete PREBOOT\n");
+#endif
+	*kbd_data = '\0';
+	return (NULL);
+}
+#endif /* CONFIG_PREBOOT */
+
+/*---------------Board Special Commands: PIC read/write ---------------*/
+
+#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+/***********************************************************************
+F* Function:     int do_pic (cmd_tbl_t *cmdtp, int flag,
+F*                           int argc, char *argv[]) P*A*Z*
+ *
+P* Parameters:   cmd_tbl_t *cmdtp
+P*                - Pointer to our command table entry
+P*               int flag
+P*                - If the CMD_FLAG_REPEAT bit is set, then this call is
+P*                  a repetition
+P*               int argc
+P*                - Argument count
+P*               char *argv[]
+P*                - Array of the actual arguments
+P*
+P* Returnvalue:  int
+P*                - 0  The command was handled successfully
+P*                  1  An error occurred
+ *
+Z* Intention:    Implement the "pic [read|write]" commands.
+Z*               The read subcommand takes one argument, the register,
+Z*               whereas the write command takes two, the register and
+Z*               the new value.
+ *
+D* Design:       wd@denx.de
+C* Coding:       wd@denx.de
+V* Verification: dzu@denx.de
+ ***********************************************************************/
+int do_pic (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	uchar reg, val;
+
+	switch (argc) {
+	case 3:					/* PIC read reg */
+		if (strcmp (argv[1], "read") != 0)
+			break;
+
+		reg = simple_strtoul (argv[2], NULL, 16);
+
+		printf ("PIC read: reg %02x: %02x\n\n", reg, pic_read (reg));
+
+		return 0;
+	case 4:					/* PIC write reg val */
+		if (strcmp (argv[1], "write") != 0)
+			break;
+
+		reg = simple_strtoul (argv[2], NULL, 16);
+		val = simple_strtoul (argv[3], NULL, 16);
+
+		printf ("PIC write: reg %02x val 0x%02x: %02x => ",
+				reg, val, pic_read (reg));
+		pic_write (reg, val);
+		printf ("%02x\n\n", pic_read (reg));
+		return 0;
+	default:
+		break;
+	}
+	printf ("Usage:\n%s\n", cmdtp->usage);
+	return 1;
+}
+
+/***********************************************************************
+F* Function:     int do_kbd (cmd_tbl_t *cmdtp, int flag,
+F*                           int argc, char *argv[]) P*A*Z*
+ *
+P* Parameters:   cmd_tbl_t *cmdtp
+P*                - Pointer to our command table entry
+P*               int flag
+P*                - If the CMD_FLAG_REPEAT bit is set, then this call is
+P*                  a repetition
+P*               int argc
+P*                - Argument count
+P*               char *argv[]
+P*                - Array of the actual arguments
+P*
+P* Returnvalue:  int
+P*                - 0 is always returned.
+ *
+Z* Intention:    Implement the "kbd" command.
+Z*               The keyboard status is read.  The result is printed on
+Z*               the console and written into the "keybd" environment
+Z*               variable.
+ *
+D* Design:       wd@denx.de
+C* Coding:       wd@denx.de
+V* Verification: dzu@denx.de
+ ***********************************************************************/
+int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	uchar kbd_data[KEYBD_DATALEN];
+	uchar keybd_env[2 * KEYBD_DATALEN + 1];
+	uchar val;
+	int i;
+
+	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+
+	/* Read keys */
+	val = KEYBD_CMD_READ_KEYS;
+	i2c_write (kbd_addr, 0, 0, &val, 1);
+	i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN);
+
+	puts ("Keys:");
+	for (i = 0; i < KEYBD_DATALEN; ++i) {
+		sprintf (keybd_env + i + i, "%02X", kbd_data[i]);
+		printf (" %02x", kbd_data[i]);
+	}
+	putc ('\n');
+	setenv ("keybd", keybd_env);
+	return 0;
+}
+
+/* Read and set LSB switch */
+#define CFG_PC_TXD1_ENA		0x0008
+
+/***********************************************************************
+F* Function:     int do_lsb (cmd_tbl_t *cmdtp, int flag,
+F*                           int argc, char *argv[]) P*A*Z*
+ *
+P* Parameters:   cmd_tbl_t *cmdtp
+P*                - Pointer to our command table entry
+P*               int flag
+P*                - If the CMD_FLAG_REPEAT bit is set, then this call is
+P*                  a repetition
+P*               int argc
+P*                - Argument count
+P*               char *argv[]
+P*                - Array of the actual arguments
+P*
+P* Returnvalue:  int
+P*                - 0  The command was handled successfully
+P*                  1  An error occurred
+ *
+Z* Intention:    Implement the "lsb [on|off]" commands.
+Z*               The lsb is switched according to the first parameter by
+Z*               by signaling the PIC I/O expander.
+Z*               Called with no arguments, the current setting is
+Z*               printed.
+ *
+D* Design:       wd@denx.de
+C* Coding:       wd@denx.de
+V* Verification: dzu@denx.de
+ ***********************************************************************/
+int do_lsb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	uchar val;
+	immap_t *immr = (immap_t *) CFG_IMMR;
+
+	switch (argc) {
+	case 1:					/* lsb - print setting */
+		val = pic_read (0x60);
+		printf ("LSB is o%s\n", (val & 0x20) ? "n" : "ff");
+		return 0;
+	case 2:					/* lsb on or lsb off - set switch */
+		val = pic_read (0x60);
+
+		if (strcmp (argv[1], "on") == 0) {
+			val |= 0x20;
+			immr->im_ioport.iop_pcpar &= ~(CFG_PC_TXD1_ENA);
+			immr->im_ioport.iop_pcdat |= CFG_PC_TXD1_ENA;
+			immr->im_ioport.iop_pcdir |= CFG_PC_TXD1_ENA;
+		} else if (strcmp (argv[1], "off") == 0) {
+			val &= ~0x20;
+			immr->im_ioport.iop_pcpar &= ~(CFG_PC_TXD1_ENA);
+			immr->im_ioport.iop_pcdat &= ~(CFG_PC_TXD1_ENA);
+			immr->im_ioport.iop_pcdir |= CFG_PC_TXD1_ENA;
+		} else {
+			break;
+		}
+		pic_write (0x60, val);
+		return 0;
+	default:
+		break;
+	}
+	printf ("Usage:\n%s\n", cmdtp->usage);
+	return 1;
+}
+
+#endif /* CFG_CMD_BSP */
+
+/*----------------------------- Utilities -----------------------------*/
+/***********************************************************************
+F* Function:     uchar pic_read (uchar reg) P*A*Z*
+ *
+P* Parameters:   uchar reg
+P*                - Register to read
+P*
+P* Returnvalue:  uchar
+P*                - Value read from register
+ *
+Z* Intention:    Read a register from the PIC I/O expander.
+ *
+D* Design:       wd@denx.de
+C* Coding:       wd@denx.de
+V* Verification: dzu@denx.de
+ ***********************************************************************/
+uchar pic_read (uchar reg)
+{
+	return (i2c_reg_read (CFG_I2C_PICIO_ADDR, reg));
+}
+
+/***********************************************************************
+F* Function:     void pic_write (uchar reg, uchar val) P*A*Z*
+ *
+P* Parameters:   uchar reg
+P*                - Register to read
+P*               uchar val
+P*                - Value to write
+P*
+P* Returnvalue:  none
+ *
+Z* Intention:    Write to a register on the PIC I/O expander.
+ *
+D* Design:       wd@denx.de
+C* Coding:       wd@denx.de
+V* Verification: dzu@denx.de
+ ***********************************************************************/
+void pic_write (uchar reg, uchar val)
+{
+	i2c_reg_write (CFG_I2C_PICIO_ADDR, reg, val);
+}
+
+/*---------------------- Board Control Functions ----------------------*/
+/***********************************************************************
+F* Function:     void board_poweroff (void) P*A*Z*
+ *
+P* Parameters:   none
+P*
+P* Returnvalue:  none
+ *
+Z* Intention:    Turn off the battery power and loop endless, so this
+Z*               should better be the last function you call...
+ *
+D* Design:       wd@denx.de
+C* Coding:       wd@denx.de
+V* Verification: dzu@denx.de
+ ***********************************************************************/
+void board_poweroff (void)
+{
+    /* Turn battery off */
+    ((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat &= ~(1 << (31 - 13));
+
+    while (1);
+}
diff --git a/board/musenki/README b/board/musenki/README
new file mode 100644
index 0000000000..4a1955dc38
--- /dev/null
+++ b/board/musenki/README
@@ -0,0 +1,301 @@
+U-Boot for a Musenki M-3/M-1 board
+---------------------------
+
+Musenki M-1 and M-3 have two banks of flash of 4MB or 8MB each.
+
+In board's notation, bank 0 is the one at the address of 0xFF800000
+and bank 1 is the one at the address of 0xFF000000.
+
+On power-up the processor jumps to the address of 0xFFF00100, the last
+megabyte of the bank 0 of flash.
+
+Thus, U-Boot is configured to reside in flash starting at the address of
+0xFFF00000.  The environment space is located in flash separately from
+U-Boot, at the address of 0xFF800000.
+
+There is a Davicom 9102A on-board, but I don't have it working yet.
+
+U-Boot test results
+--------------------
+
+x.x Operation on all available serial consoles
+
+x.x.x CONFIG_CONS_INDEX 1
+
+
+U-Boot 1.1.1 (Nov 20 2001 - 15:55:32)
+
+CPU:   MPC8245 Revision 16.20 at 250 MHz: 16 kB I-Cache 16 kB D-Cache
+Board: MUSENKI Local Bus at 100 MHz
+DRAM:  32 MB
+FLASH:  4 MB
+In:    serial
+Out:   serial
+Err:   serial
+Hit any key to stop autoboot:  0
+=> help
+autoscr - run script from memory
+base    - print or set address offset
+bdinfo  - print Board Info structure
+bootm   - boot application image from memory
+bootp   - boot image via network using BootP/TFTP protocol
+bootd   - boot default, i.e., run 'bootcmd'
+cmp     - memory compare
+coninfo - print console devices and informations
+cp      - memory copy
+crc32   - checksum calculation
+dcache  - enable or disable data cache
+echo    - echo args to console
+erase   - erase FLASH memory
+flinfo  - print FLASH memory information
+go      - start application at address 'addr'
+help    - print online help
+icache  - enable or disable instruction cache
+iminfo  - print header information for application image
+loadb   - load binary file over serial line (kermit mode)
+loads   - load S-Record file over serial line
+loop    - infinite loop on address range
+md      - memory display
+mm      - memory modify (auto-incrementing)
+mtest   - simple RAM test
+mw      - memory write (fill)
+nm      - memory modify (constant address)
+printenv- print environment variables
+protect - enable or disable FLASH write protection
+rarpboot- boot image via network using RARP/TFTP protocol
+reset   - Perform RESET of the CPU
+run     - run commands in an environment variable
+saveenv - save environment variables to persistent storage
+setenv  - set environment variables
+tftpboot- boot image via network using TFTP protocol
+               and env variables ipaddr and serverip
+version - print monitor version
+?       - alias for 'help'
+
+
+
+x.x.x CONFIG_CONS_INDEX 2
+
+**** NOT TESTED ****
+
+x.x Flash Driver Operation
+
+
+Boot 1.1.1 (Nov 20 2001 - 15:55:32)
+
+CPU:   MPC8245 Revision 16.20 at 250 MHz: 16 kB I-Cache 16 kB D-Cache
+Board: MUSENKI Local Bus at 100 MHz
+DRAM:  32 MB
+FLASH:  4 MB
+*** Warning - bad CRC, using default environment
+
+In:    serial
+Out:   serial
+Err:   serial
+Hit any key to stop autoboot:  0
+=>
+=> md ff800000
+ff800000: 46989bf8 626f6f74 636d643d 626f6f74    F...bootcmd=boot
+ff800010: 6d204646 38323030 30300062 6f6f7464    m FF820000.bootd
+ff800020: 656c6179 3d350062 61756472 6174653d    elay=5.baudrate=
+ff800030: 39363030 00636c6f 636b735f 696e5f6d    9600.clocks_in_m
+ff800040: 687a3d31 00737464 696e3d73 65726961    hz=1.stdin=seria
+ff800050: 6c007374 646f7574 3d736572 69616c00    l.stdout=serial.
+ff800060: 73746465 72723d73 65726961 6c006970    stderr=serial.ip
+ff800070: 61646472 3d313932 2e313638 2e302e34    addr=192.168.0.4
+ff800080: 32007365 72766572 69703d31 39322e31    2.serverip=192.1
+ff800090: 36382e30 2e380000 00000000 00000000    68.0.8..........
+ff8000a0: 00000000 00000000 00000000 00000000    ................
+ff8000b0: 00000000 00000000 00000000 00000000    ................
+ff8000c0: 00000000 00000000 00000000 00000000    ................
+ff8000d0: 00000000 00000000 00000000 00000000    ................
+ff8000e0: 00000000 00000000 00000000 00000000    ................
+ff8000f0: 00000000 00000000 00000000 00000000    ................
+=> protect off ff800000 ff81ffff
+Un-Protected 1 sectors
+=> erase ff800000 ff81ffff
+Erase Flash from 0xff800000 to 0xff81ffff
+ done
+Erased 1 sectors
+=> md ff800000
+ff800000: ffffffff ffffffff ffffffff ffffffff    ................
+ff800010: ffffffff ffffffff ffffffff ffffffff    ................
+ff800020: ffffffff ffffffff ffffffff ffffffff    ................
+ff800030: ffffffff ffffffff ffffffff ffffffff    ................
+ff800040: ffffffff ffffffff ffffffff ffffffff    ................
+ff800050: ffffffff ffffffff ffffffff ffffffff    ................
+ff800060: ffffffff ffffffff ffffffff ffffffff    ................
+ff800070: ffffffff ffffffff ffffffff ffffffff    ................
+ff800080: ffffffff ffffffff ffffffff ffffffff    ................
+ff800090: ffffffff ffffffff ffffffff ffffffff    ................
+ff8000a0: ffffffff ffffffff ffffffff ffffffff    ................
+ff8000b0: ffffffff ffffffff ffffffff ffffffff    ................
+ff8000c0: ffffffff ffffffff ffffffff ffffffff    ................
+ff8000d0: ffffffff ffffffff ffffffff ffffffff    ................
+ff8000e0: ffffffff ffffffff ffffffff ffffffff    ................
+ff8000f0: ffffffff ffffffff ffffffff ffffffff    ................
+
+x.x.x Information
+
+
+U-Boot 1.1.1 (Nov 20 2001 - 15:55:32)
+
+CPU:   MPC8245 Revision 16.20 at 250 MHz: 16 kB I-Cache 16 kB D-Cache
+Board: MUSENKI Local Bus at 100 MHz
+DRAM:  32 MB
+FLASH:  4 MB
+*** Warning - bad CRC, using default environment
+
+In:    serial
+Out:   serial
+Err:   serial
+Hit any key to stop autoboot:  0
+=> flinfo
+
+Bank # 1: Intel 28F320J3A (32Mbit = 128K x 32)
+  Size: 4 MB in 32 Sectors
+  Sector Start Addresses:
+    FF800000 (RO) FF820000      FF840000      FF860000      FF880000
+    FF8A0000      FF8C0000      FF8E0000      FF900000      FF920000
+    FF940000      FF960000      FF980000      FF9A0000      FF9C0000
+    FF9E0000      FFA00000      FFA20000      FFA40000      FFA60000
+    FFA80000      FFAA0000      FFAC0000      FFAE0000      FFB00000
+    FFB20000      FFB40000      FFB60000      FFB80000      FFBA0000
+    FFBC0000      FFBE0000
+
+Bank # 2: missing or unknown FLASH type
+=>
+
+
+
+x.x.x Flash Programming
+
+
+U-Boot 1.1.1 (Nov 20 2001 - 15:55:32)
+
+CPU:   MPC8245 Revision 16.20 at 250 MHz: 16 kB I-Cache 16 kB D-Cache
+Board: MUSENKI Local Bus at 100 MHz
+DRAM:  32 MB
+FLASH:  4 MB
+
+In:    serial
+Out:   serial
+Err:   serial
+Hit any key to stop autoboot:  0
+=>
+=>
+=>
+=> protect off ff800000 ff81ffff
+Un-Protected 1 sectors
+=> cp 0 ff800000 20
+Copy to Flash... done
+=> md ff800000
+ff800000: 37ce33ec 33cc334c 33c031cc 33cc35cc    7.3.3.3L3.1.3.5.
+ff800010: 33ec13ce 30ccb3ec b3c833c4 31c836cc    3...0.....3.1.6.
+ff800020: 33cc3b9d 31ec33ee 13ecf3cc 338833ec    3.;.1.3.....3.3.
+ff800030: 234c33ec 32cc22cc 33883bdc 534433cc    #L3.2.".3.;.SD3.
+ff800040: 33cc30c8 31cc32ec 338c33cc 330c33dc    3.0.1.2.3.3.3.3.
+ff800050: 33cc13dc 334c534c b1c433d8 128c13cc    3...3LSL..3.....
+ff800060: 37ec36cd 33dc33cc bbc9f7e8 bbcc77cc    7.6.3.3.......w.
+ff800070: 314c0adc 139c30ed 33cc334c 33c833ec    1L....0.3.3L3.3.
+ff800080: ffffffff ffffffff ffffffff ffffffff    ................
+ff800090: ffffffff ffffffff ffffffff ffffffff    ................
+ff8000a0: ffffffff ffffffff ffffffff ffffffff    ................
+ff8000b0: ffffffff ffffffff ffffffff ffffffff    ................
+ff8000c0: ffffffff ffffffff ffffffff ffffffff    ................
+ff8000d0: ffffffff ffffffff ffffffff ffffffff    ................
+ff8000e0: ffffffff ffffffff ffffffff ffffffff    ................
+ff8000f0: ffffffff ffffffff ffffffff ffffffff    ................
+
+
+x.x.x Storage of environment variables in flash
+
+
+U-Boot 1.1.1 (Nov 20 2001 - 15:55:32)
+
+CPU:   MPC8245 Revision 16.20 at 250 MHz: 16 kB I-Cache 16 kB D-Cache
+Board: MUSENKI Local Bus at 100 MHz
+DRAM:  32 MB
+FLASH:  4 MB
+In:    serial
+Out:   serial
+Err:   serial
+Hit any key to stop autoboot:  0
+=> printenv
+bootcmd=bootm FF820000
+bootdelay=5
+baudrate=9600
+clocks_in_mhz=1
+stdin=serial
+stdout=serial
+stderr=serial
+
+Environment size: 106/16380 bytes
+=> setenv myvar 1234
+=> saveenv
+Un-Protected 1 sectors
+Erasing Flash...
+ done
+Erased 1 sectors
+Saving Environment to Flash...
+Protected 1 sectors
+=> reset
+
+
+U-Boot 1.1.1 (Nov 20 2001 - 15:55:32)
+
+CPU:   MPC8245 Revision 16.20 at 250 MHz: 16 kB I-Cache 16 kB D-Cache
+Board: MUSENKI Local Bus at 100 MHz
+DRAM:  32 MB
+FLASH:  4 MB
+In:    serial
+Out:   serial
+Err:   serial
+Hit any key to stop autoboot:  0
+=> printenv
+bootcmd=bootm FF820000
+bootdelay=5
+baudrate=9600
+clocks_in_mhz=1
+myvar=1234
+stdin=serial
+stdout=serial
+stderr=serial
+
+Environment size: 117/16380 bytes
+
+x.x Image Download and run over serial port
+
+
+U-Boot 1.1.1 (Nov 20 2001 - 15:55:32)
+
+CPU:   MPC8245 Revision 16.20 at 250 MHz: 16 kB I-Cache 16 kB D-Cache
+Board: MUSENKI Local Bus at 100 MHz
+DRAM:  32 MB
+FLASH:  4 MB
+In:    serial
+Out:   serial
+Err:   serial
+Hit any key to stop autoboot:  0
+=> loads
+## Ready for S-Record download ...
+
+## First Load Addr = 0x00040000
+## Last  Load Addr = 0x00050177
+## Total Size      = 0x00010178 = 65912 Bytes
+## Start Addr      = 0x00040004
+=> go 40004
+## Starting application at 0x00040004 ...
+Hello World
+argc = 1
+argv[0] = "40004"
+argv[1] = "<NULL>"
+Hit any key to exit ...
+
+## Application terminated, rc = 0x0
+
+
+x.x Image download and run over ethernet interface
+
+untested (not working yet, actually)
+
diff --git a/board/pcippc2/u-boot.lds b/board/pcippc2/u-boot.lds
new file mode 100644
index 0000000000..25ff2ffa3b
--- /dev/null
+++ b/board/pcippc2/u-boot.lds
@@ -0,0 +1,132 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * u-boot.lds - linker script for U-Boot on the Galileo Eval Board.
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/74xx_7xx/start.o	(.text)
+
+/* store the environment in a seperate sector in the boot flash */
+/*    . = env_offset; */
+/*    common/environment.o(.text) */
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/pm826/config.mk b/board/pm826/config.mk
new file mode 100644
index 0000000000..8502e3f107
--- /dev/null
+++ b/board/pm826/config.mk
@@ -0,0 +1,42 @@
+#
+# (C) Copyright 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# PM826 boards
+#
+
+# This should be equal to the CFG_FLASH_BASE or
+# CFG_BOOTROM_BASE define in config_PM826.h
+# for the "final" configuration, with U-Boot
+# in flash, or the address in RAM where
+# U-Boot is loaded at for debugging.
+#
+
+ifeq ($(CONFIG_BOOT_ROM),y)
+	TEXT_BASE := 0x60000000
+	PLATFORM_CPPFLAGS += -DCONFIG_BOOT_ROM
+else
+	TEXT_BASE := 0x40000000
+endif
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)
diff --git a/board/rpxsuper/readme b/board/rpxsuper/readme
new file mode 100644
index 0000000000..21267bdd8c
--- /dev/null
+++ b/board/rpxsuper/readme
@@ -0,0 +1,30 @@
+Hi,
+
+so this is the port to the Embedded Planet RPX Super Board.
+
+ATTENTION
+This code is only tested on the AY-Version, which is an early release with some
+hardware bugs. The main problem is that this board uses the default Hard Reset
+Configuration Word and not the 4 bytes located at start of FLASH because at
+0xFE000000 is no FLASH. The FLASH consists out of 4 chips each 16bits wide. Be
+carefull, the bytes are swapped. So DQ0-7 is the high byte, DQ8-15 ist the low
+byte.
+
+The icache can only manually be enabled after reset.
+The FLASH and main SDRAM is working with icache enabled.
+The local SDRAM can only be used as data memory when icache is enabled.
+If U-Boot runs in local SDRAM, TFTP does not work.
+The functions in mii_phy.c are all working. Call mii_phy_discover() out of
+eth_init() and solve the linker error.
+I2C, RTC/NVRAM and PCMCIA are not working yet.
+
+TODO
+The 32MB local SDRAM is working but not shown in the startup messages of
+U-Boot. If you locate U-Boot or any other program to this area it won't run.
+Turning the ichache off does not solve this problem.
+
+As I won't buy another RPX Super there might be some little work to do for you
+getting this U-Boot port running on the final board.
+
+
+frank.morauf@salzbrenner.com
diff --git a/board/siemens/SCM/config.mk b/board/siemens/SCM/config.mk
new file mode 100644
index 0000000000..855ae38f81
--- /dev/null
+++ b/board/siemens/SCM/config.mk
@@ -0,0 +1,34 @@
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# Siemens SCM boards
+#
+
+# This should be equal to the CFG_FLASH_BASE define in config_SCM.h
+# for the "final" configuration, with U-Boot in flash, or the address
+# in RAM where U-Boot is loaded at for debugging.
+#
+TEXT_BASE = 0x40000000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)
diff --git a/board/tqm8260/config.mk b/board/tqm8260/config.mk
new file mode 100644
index 0000000000..1fe99524c6
--- /dev/null
+++ b/board/tqm8260/config.mk
@@ -0,0 +1,34 @@
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# TQM8260 boards
+#
+
+# This should be equal to the CFG_FLASH_BASE define in config_TQM8260.h
+# for the "final" configuration, with U-Boot in flash, or the address
+# in RAM where U-Boot is loaded at for debugging.
+#
+TEXT_BASE = 0x40000000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)