diff options
| author | Hans de Goede <hdegoede@redhat.com> | 2016-03-22 20:10:30 +0100 |
|---|---|---|
| committer | Hans de Goede <hdegoede@redhat.com> | 2016-03-23 22:04:13 +0100 |
| commit | 9fbb0c3aa49f4604b0342cb527a6bd099f92eaeb (patch) | |
| tree | ff77a340d90712e8a9696a5b8a752556a9f3d7c3 /board | |
| parent | fc8991c61c393ce6a9d3dfc97cb56dbbd9e8cbba (diff) | |
| download | talos-obmc-uboot-9fbb0c3aa49f4604b0342cb527a6bd099f92eaeb.tar.gz talos-obmc-uboot-9fbb0c3aa49f4604b0342cb527a6bd099f92eaeb.zip | |
sunxi: Turn satapwr on from board_init
There are 2 reasons for doing this:
1) The main reason for doing this is to move it outside of
board/sunxi/ahci.c, so that it can be used on boards which use
a usb<->sata chip too;
2) While doing this I realized that doing it from board_init also meant
doing it much earlier. Some printf get_timer(0) calls show that the
time between board_init() and scsi_init() is more then 600 ms,
so we can drop the mdelay(500)
While at it also drop the printf("SUNXI SCSI INIT\n") AHCI init is
noisy enough by itself.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Diffstat (limited to 'board')
| -rw-r--r-- | board/sunxi/ahci.c | 8 | ||||
| -rw-r--r-- | board/sunxi/board.c | 4 |
2 files changed, 4 insertions, 8 deletions
diff --git a/board/sunxi/ahci.c b/board/sunxi/ahci.c index 6d51b9b8e9..522e54ab16 100644 --- a/board/sunxi/ahci.c +++ b/board/sunxi/ahci.c @@ -72,14 +72,6 @@ static int sunxi_ahci_phy_init(u32 base) void scsi_init(void) { - printf("SUNXI SCSI INIT\n"); -#ifdef CONFIG_SATAPWR - gpio_request(CONFIG_SATAPWR, "satapwr"); - gpio_direction_output(CONFIG_SATAPWR, 1); - /* Give attached sata device time to power-up to avoid link timeouts */ - mdelay(500); -#endif - if (sunxi_ahci_phy_init(SUNXI_SATA_BASE) < 0) return; diff --git a/board/sunxi/board.c b/board/sunxi/board.c index e16718f308..2e2a1f59bc 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -90,6 +90,10 @@ int board_init(void) if (ret) return ret; +#ifdef CONFIG_SATAPWR + gpio_request(CONFIG_SATAPWR, "satapwr"); + gpio_direction_output(CONFIG_SATAPWR, 1); +#endif #ifdef CONFIG_MACPWR gpio_request(CONFIG_MACPWR, "macpwr"); gpio_direction_output(CONFIG_MACPWR, 1); |
