summaryrefslogtreecommitdiffstats
path: root/board
diff options
context:
space:
mode:
authorwdenk <wdenk>2003-07-16 21:53:01 +0000
committerwdenk <wdenk>2003-07-16 21:53:01 +0000
commit945af8d723a29e9b6289d84250745ed0dc16fc81 (patch)
tree6798d0b717c05b01742df0c410038c702b8a1979 /board
parentcb4dbb7bbc271f988e14ec353a5e86d7f10e1da0 (diff)
downloadtalos-obmc-uboot-945af8d723a29e9b6289d84250745ed0dc16fc81.tar.gz
talos-obmc-uboot-945af8d723a29e9b6289d84250745ed0dc16fc81.zip
* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
* Add support for MGT5100 and MPC5200 processors
Diffstat (limited to 'board')
-rw-r--r--board/a3000/a3000.c12
-rw-r--r--board/exbitgen/flash.c24
-rw-r--r--board/exbitgen/init.S296
-rw-r--r--board/exbitgen/u-boot.lds2
-rw-r--r--board/gen860t/gen860t.c2
-rw-r--r--board/icecube/Makefile47
-rw-r--r--board/icecube/config.mk31
-rw-r--r--board/icecube/flash.c480
-rw-r--r--board/icecube/icecube.c116
-rw-r--r--board/icecube/u-boot.lds122
-rw-r--r--board/lwmon/lwmon.c2
-rw-r--r--board/omap1510inn/platform.S334
-rw-r--r--board/omap1510inn/u-boot.lds20
-rw-r--r--board/sacsng/sacsng.c2
-rw-r--r--board/sl8245/u-boot.lds1
-rw-r--r--board/tqm8xx/flash.c2
16 files changed, 1144 insertions, 349 deletions
diff --git a/board/a3000/a3000.c b/board/a3000/a3000.c
index 8d665855ca..efc95a30e8 100644
--- a/board/a3000/a3000.c
+++ b/board/a3000/a3000.c
@@ -91,31 +91,31 @@ Done:
*/
#ifndef CONFIG_PCI_PNP
static struct pci_config_table pci_a3000_config_table[] = {
- /* vendor, device, class */
- /* bus, dev, func */
+ /* vendor, device, class */
+ /* bus, dev, func */
{ PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_83815, PCI_ANY_ID,
- PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, /* dp83815 eth0 divice */
+ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, /* dp83815 eth0 divice */
pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
PCI_ENET0_MEMADDR,
PCI_COMMAND_IO |
PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER }},
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_ANY_ID, 0x14, PCI_ANY_ID, /* PCI slot1 */
+ PCI_ANY_ID, 0x14, PCI_ANY_ID, /* PCI slot1 */
pci_cfgfunc_config_device, { PCI_ENET1_IOADDR,
PCI_ENET1_MEMADDR,
PCI_COMMAND_IO |
PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER }},
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_ANY_ID, 0x15, PCI_ANY_ID, /* PCI slot2 */
+ PCI_ANY_ID, 0x15, PCI_ANY_ID, /* PCI slot2 */
pci_cfgfunc_config_device, { PCI_ENET2_IOADDR,
PCI_ENET2_MEMADDR,
PCI_COMMAND_IO |
PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER }},
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_ANY_ID, 0x16, PCI_ANY_ID, /* PCI slot3 */
+ PCI_ANY_ID, 0x16, PCI_ANY_ID, /* PCI slot3 */
pci_cfgfunc_config_device, { PCI_ENET3_IOADDR,
PCI_ENET3_MEMADDR,
PCI_COMMAND_IO |
diff --git a/board/exbitgen/flash.c b/board/exbitgen/flash.c
index f687ea3a26..ae88994b2c 100644
--- a/board/exbitgen/flash.c
+++ b/board/exbitgen/flash.c
@@ -217,7 +217,7 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
short i;
FLASH_WORD_SIZE value;
ulong base = (ulong)addr;
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
+ volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
/* Write auto select command: read Manufacturer ID */
addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
@@ -247,7 +247,7 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
switch (value) {
case (FLASH_WORD_SIZE)AMD_ID_F040B:
- info->flash_id += FLASH_AM040;
+ info->flash_id += FLASH_AM040;
info->sector_count = 8;
info->size = 0x0080000; /* => 512 ko */
break;
@@ -335,14 +335,14 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
}
/* set up sector start address table */
- if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+ if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
(info->flash_id == FLASH_AM040) ||
(info->flash_id == FLASH_AMDLV033C) ||
(info->flash_id == FLASH_AMDLV065D)) {
ulong sectsize = info->size / info->sector_count;
for (i = 0; i < info->sector_count; i++)
info->start[i] = base + (i * sectsize);
- } else {
+ } else {
if (info->flash_id & FLASH_BTYPE) {
/* set sector offsets for bottom boot block type */
info->start[0] = base + 0x00000000;
@@ -370,9 +370,9 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
/* D0 = 1 if protected */
addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
info->protect[i] = 0;
- else
+ else
info->protect[i] = addr2[2] & 1;
}
@@ -450,7 +450,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
while ((addr2[0] & 0x00800080) !=
(FLASH_WORD_SIZE) 0x00800080) {
if ((now=get_timer(start)) >
- CFG_FLASH_ERASE_TOUT) {
+ CFG_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
addr[0] = (FLASH_WORD_SIZE)0x00F000F0;
return 1;
@@ -551,12 +551,12 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
*/
static int write_word (flash_info_t *info, ulong dest, ulong data)
{
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)(info->start[0]);
- volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *)dest;
- volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *)&data;
+ volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)(info->start[0]);
+ volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *)dest;
+ volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *)&data;
ulong start;
int flag;
- int i;
+ int i;
/* Check if Flash is (sufficiently) erased */
if ((*((volatile ulong *)dest) & data) != data) {
@@ -565,7 +565,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
return 2;
}
- for (i=0; i < 4/sizeof(FLASH_WORD_SIZE); i++) {
+ for (i=0; i < 4/sizeof(FLASH_WORD_SIZE); i++) {
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
diff --git a/board/exbitgen/init.S b/board/exbitgen/init.S
index 96b0abae1b..0e6cd04ba8 100644
--- a/board/exbitgen/init.S
+++ b/board/exbitgen/init.S
@@ -34,7 +34,7 @@
#include <asm/mmu.h>
#include "exbitgen.h"
-
+
/* IIC declarations (This is an extract from 405gp_i2c.h, which also contains some */
/* c-code declarations and consequently can't be included here). */
/* (Possibly to be solved somehow else). */
@@ -100,25 +100,25 @@
#define TIMEBASE_10PS (1000000000 / CONFIG_SYS_CLK_FREQ) * 100
#define FLASH_8bit_AP 0x9B015480
-#define FLASH_8bit_CR 0xFFF18000 /* 1MB(min), 8bit, R/W */
+#define FLASH_8bit_CR 0xFFF18000 /* 1MB(min), 8bit, R/W */
#define FLASH_32bit_AP 0x9B015480
#define FLASH_32bit_CR 0xFFE3C000 /* 2MB, 32bit, R/W */
#define WDCR_EBC(reg,val) addi r4,0,reg;\
- mtdcr ebccfga,r4;\
- addis r4,0,val@h;\
- ori r4,r4,val@l;\
- mtdcr ebccfgd,r4
+ mtdcr ebccfga,r4;\
+ addis r4,0,val@h;\
+ ori r4,r4,val@l;\
+ mtdcr ebccfgd,r4
/*---------------------------------------------------------------------
* Function: ext_bus_cntlr_init
- * Description: Initializes the External Bus Controller for the external
- * peripherals. IMPORTANT: For pass1 this code must run from
+ * Description: Initializes the External Bus Controller for the external
+ * peripherals. IMPORTANT: For pass1 this code must run from
* cache since you can not reliably change a peripheral banks
* timing register (pbxap) while running code from that bank.
- * For ex., since we are running from ROM on bank 0, we can NOT
+ * For ex., since we are running from ROM on bank 0, we can NOT
* execute the code that modifies bank 0 timings from ROM, so
* we run it from cache.
* Bank 0 - Boot flash
@@ -126,63 +126,63 @@
* Bank 5 - CPLD
* Bank 6 - not used
* Bank 7 - Heathrow chip
- *---------------------------------------------------------------------
+ *---------------------------------------------------------------------
*/
- .globl ext_bus_cntlr_init
+ .globl ext_bus_cntlr_init
ext_bus_cntlr_init:
- mflr r4 /* save link register */
- bl ..getAddr
+ mflr r4 /* save link register */
+ bl ..getAddr
..getAddr:
- mflr r3 /* get address of ..getAddr */
- mtlr r4 /* restore link register */
- addi r4,0,14 /* set ctr to 10; used to prefetch */
- mtctr r4 /* 10 cache lines to fit this function */
- /* in cache (gives us 8x10=80 instrctns) */
+ mflr r3 /* get address of ..getAddr */
+ mtlr r4 /* restore link register */
+ addi r4,0,14 /* set ctr to 10; used to prefetch */
+ mtctr r4 /* 10 cache lines to fit this function */
+ /* in cache (gives us 8x10=80 instrctns) */
..ebcloop:
- icbt r0,r3 /* prefetch cache line for addr in r3 */
- addi r3,r3,32 /* move to next cache line */
- bdnz ..ebcloop /* continue for 10 cache lines */
+ icbt r0,r3 /* prefetch cache line for addr in r3 */
+ addi r3,r3,32 /* move to next cache line */
+ bdnz ..ebcloop /* continue for 10 cache lines */
mflr r31 /* save link register */
-
- /*-----------------------------------------------------------
- * Delay to ensure all accesses to ROM are complete before changing
+
+ /*-----------------------------------------------------------
+ * Delay to ensure all accesses to ROM are complete before changing
* bank 0 timings. 200usec should be enough.
- * 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles
- *-----------------------------------------------------------
+ * 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles
+ *-----------------------------------------------------------
*/
addis r3,0,0x0
- ori r3,r3,0xA000 /* ensure 200usec have passed since reset */
- mtctr r3
+ ori r3,r3,0xA000 /* ensure 200usec have passed since reset */
+ mtctr r3
..spinlp:
- bdnz ..spinlp /* spin loop */
+ bdnz ..spinlp /* spin loop */
- /*---------------------------------------------------------------
- * Memory Bank 0 (Boot Flash) initialization
- *---------------------------------------------------------------
+ /*---------------------------------------------------------------
+ * Memory Bank 0 (Boot Flash) initialization
+ *---------------------------------------------------------------
*/
WDCR_EBC(pb0ap, FLASH_32bit_AP)
WDCR_EBC(pb0cr, 0xffe38000)
/*pnc WDCR_EBC(pb0cr, FLASH_32bit_CR) */
-
- /*---------------------------------------------------------------
- * Memory Bank 5 (CPLD) initialization
- *---------------------------------------------------------------
+
+ /*---------------------------------------------------------------
+ * Memory Bank 5 (CPLD) initialization
+ *---------------------------------------------------------------
*/
WDCR_EBC(pb5ap, 0x01010040)
/*jsa recommendation: WDCR_EBC(pb5ap, 0x00010040) */
WDCR_EBC(pb5cr, 0x10038000)
- /*--------------------------------------------------------------- */
- /* Memory Bank 6 (not used) initialization */
- /*--------------------------------------------------------------- */
+ /*--------------------------------------------------------------- */
+ /* Memory Bank 6 (not used) initialization */
+ /*--------------------------------------------------------------- */
WDCR_EBC(pb6cr, 0x00000000)
/* Read HW ID to determine whether old H2 board or new generic CPU board */
addis r3, 0, HW_ID_ADDR@h
ori r3, r3, HW_ID_ADDR@l
- lbz r3,0x0000(r3)
+ lbz r3,0x0000(r3)
cmpi 0, r3, 1 /* if (HW_ID==1) */
beq setup_h2evalboard /* then jump */
cmpi 0, r3, 2 /* if (HW_ID==2) */
@@ -191,9 +191,9 @@ ext_bus_cntlr_init:
beq setup_genieboard /* then jump */
setup_genieboard:
- /*--------------------------------------------------------------- */
- /* Memory Bank 1 (Application Flash) initialization for generic CPU board */
- /*--------------------------------------------------------------- */
+ /*--------------------------------------------------------------- */
+ /* Memory Bank 1 (Application Flash) initialization for generic CPU board */
+ /*--------------------------------------------------------------- */
/* WDCR_EBC(pb1ap, 0x7b015480) /###* T.B.M. */
/* WDCR_EBC(pb1ap, 0x7F8FFE80) /###* T.B.M. */
WDCR_EBC(pb1ap, 0x9b015480) /* hlb-20020207: burst 8 bit 6 cycles */
@@ -201,68 +201,68 @@ setup_genieboard:
/* WDCR_EBC(pb1cr, 0x20098000) /###* 16 MB */
WDCR_EBC(pb1cr, 0x200B8000) /* 32 MB */
- /*--------------------------------------------------------------- */
- /* Memory Bank 4 (Onboard FPGA) initialization for generic CPU board */
- /*--------------------------------------------------------------- */
+ /*--------------------------------------------------------------- */
+ /* Memory Bank 4 (Onboard FPGA) initialization for generic CPU board */
+ /*--------------------------------------------------------------- */
WDCR_EBC(pb4ap, 0x01010000) /* */
WDCR_EBC(pb4cr, 0x1021c000) /* */
- /*--------------------------------------------------------------- */
- /* Memory Bank 7 (Heathrow chip on Reference board) initialization */
- /*--------------------------------------------------------------- */
+ /*--------------------------------------------------------------- */
+ /* Memory Bank 7 (Heathrow chip on Reference board) initialization */
+ /*--------------------------------------------------------------- */
WDCR_EBC(pb7ap, 0x200ffe80) /* No Ready, many wait states (let reflections die out) */
WDCR_EBC(pb7cr, 0X4001A000)
bl setup_continue
-
+
setup_h2evalboard:
- /*--------------------------------------------------------------- */
- /* Memory Bank 1 (Application Flash) initialization */
- /*--------------------------------------------------------------- */
+ /*--------------------------------------------------------------- */
+ /* Memory Bank 1 (Application Flash) initialization */
+ /*--------------------------------------------------------------- */
WDCR_EBC(pb1ap, 0x7b015480) /* T.B.M. */
/*3010 WDCR_EBC(pb1ap, 0x7F8FFE80) /###* T.B.M. */
- WDCR_EBC(pb1cr, 0x20058000)
+ WDCR_EBC(pb1cr, 0x20058000)
- /*--------------------------------------------------------------- */
- /* Memory Bank 2 (Application Flash) initialization */
- /*--------------------------------------------------------------- */
+ /*--------------------------------------------------------------- */
+ /* Memory Bank 2 (Application Flash) initialization */
+ /*--------------------------------------------------------------- */
WDCR_EBC(pb2ap, 0x7b015480) /* T.B.M. */
/*3010 WDCR_EBC(pb2ap, 0x7F8FFE80) /###* T.B.M. */
- WDCR_EBC(pb2cr, 0x20458000)
+ WDCR_EBC(pb2cr, 0x20458000)
/*--------------------------------------------------------------- */
- /* Memory Bank 3 (Application Flash) initialization */
- /*--------------------------------------------------------------- */
+ /* Memory Bank 3 (Application Flash) initialization */
+ /*--------------------------------------------------------------- */
WDCR_EBC(pb3ap, 0x7b015480) /* T.B.M. */
/*3010 WDCR_EBC(pb3ap, 0x7F8FFE80) /###* T.B.M. */
- WDCR_EBC(pb3cr, 0x20858000)
+ WDCR_EBC(pb3cr, 0x20858000)
- /*--------------------------------------------------------------- */
- /* Memory Bank 4 (Application Flash) initialization */
- /*--------------------------------------------------------------- */
+ /*--------------------------------------------------------------- */
+ /* Memory Bank 4 (Application Flash) initialization */
+ /*--------------------------------------------------------------- */
WDCR_EBC(pb4ap, 0x7b015480) /* T.B.M. */
/*3010 WDCR_EBC(pb4ap, 0x7F8FFE80) /###* T.B.M. */
WDCR_EBC(pb4cr, 0x20C58000)
- /*--------------------------------------------------------------- */
- /* Memory Bank 7 (Heathrow chip) initialization */
- /*--------------------------------------------------------------- */
+ /*--------------------------------------------------------------- */
+ /* Memory Bank 7 (Heathrow chip) initialization */
+ /*--------------------------------------------------------------- */
WDCR_EBC(pb7ap, 0x02000280) /* No Ready, 4 wait states */
WDCR_EBC(pb7cr, 0X4001A000)
setup_continue:
-
- mtlr r31 /* restore lr */
+
+ mtlr r31 /* restore lr */
nop /* pass2 DCR errata #8 */
- blr
+ blr
/*--------------------------------------------------------------------- */
/* Function: sdram_init */
/* Description: Configures SDRAM memory banks. */
/*--------------------------------------------------------------------- */
- .globl sdram_init
+ .globl sdram_init
sdram_init:
#if CFG_MONITOR_BASE < CFG_FLASH_BASE
@@ -377,12 +377,12 @@ sdram_init:
subf r5, r6, r17
or r4, r4, r5
- /*----------------------------------------------------------- */
- /* Set SDTR1 */
- /*----------------------------------------------------------- */
- addi r5,0,mem_sdtr1
- mtdcr memcfga,r5
- mtdcr memcfgd,r4
+ /*----------------------------------------------------------- */
+ /* Set SDTR1 */
+ /*----------------------------------------------------------- */
+ addi r5,0,mem_sdtr1
+ mtdcr memcfga,r5
+ mtdcr memcfgd,r4
/*----------------------------------------------------------- */
/* */
@@ -444,36 +444,36 @@ b1skip: addi r7,0,mem_mb2cf
addi r7,0,mem_mb3cf
mtdcr memcfga,r7
mtdcr memcfgd,r6
-b3skip:
+b3skip:
- /*----------------------------------------------------------- */
- /* Set RTR */
- /*----------------------------------------------------------- */
+ /*----------------------------------------------------------- */
+ /* Set RTR */
+ /*----------------------------------------------------------- */
cmpi 0, r30, 1600
bge rtr_1
- addis r7, 0, 0x05F0 /* RTR value for 100Mhz */
+ addis r7, 0, 0x05F0 /* RTR value for 100Mhz */
bl rtr_2
rtr_1: addis r7, 0, 0x03F8
rtr_2: addi r4,0,mem_rtr
mtdcr memcfga,r4
mtdcr memcfgd,r7
- /*----------------------------------------------------------- */
- /* Delay to ensure 200usec have elapsed since reset. Assume worst */
- /* case that the core is running 200Mhz: */
- /* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles */
- /*----------------------------------------------------------- */
- addis r3,0,0x0000
- ori r3,r3,0xA000 /* ensure 200usec have passed since reset */
- mtctr r3
+ /*----------------------------------------------------------- */
+ /* Delay to ensure 200usec have elapsed since reset. Assume worst */
+ /* case that the core is running 200Mhz: */
+ /* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles */
+ /*----------------------------------------------------------- */
+ addis r3,0,0x0000
+ ori r3,r3,0xA000 /* ensure 200usec have passed since reset */
+ mtctr r3
..spinlp2:
- bdnz ..spinlp2 /* spin loop */
+ bdnz ..spinlp2 /* spin loop */
- /*----------------------------------------------------------- */
- /* Set memory controller options reg, MCOPT1. */
+ /*----------------------------------------------------------- */
+ /* Set memory controller options reg, MCOPT1. */
/* Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst */
/* read/prefetch. */
- /*----------------------------------------------------------- */
+ /*----------------------------------------------------------- */
addi r4,0,mem_mcopt1
mtdcr memcfga,r4
addis r4,0,0x80C0 /* set DC_EN=1 */
@@ -481,13 +481,13 @@ rtr_2: addi r4,0,mem_rtr
mtdcr memcfgd,r4
- /*----------------------------------------------------------- */
- /* Delay to ensure 10msec have elapsed since reset. This is */
- /* required for the MPC952 to stabalize. Assume worst */
- /* case that the core is running 200Mhz: */
- /* 200,000,000 (cycles/sec) X .010 (sec) = 0x1E8480 cycles */
- /* This delay should occur before accessing SDRAM. */
- /*----------------------------------------------------------- */
+ /*----------------------------------------------------------- */
+ /* Delay to ensure 10msec have elapsed since reset. This is */
+ /* required for the MPC952 to stabalize. Assume worst */
+ /* case that the core is running 200Mhz: */
+ /* 200,000,000 (cycles/sec) X .010 (sec) = 0x1E8480 cycles */
+ /* This delay should occur before accessing SDRAM. */
+ /*----------------------------------------------------------- */
addis r3,0,0x001E
ori r3,r3,0x8480 /* ensure 10msec have passed since reset */
mtctr r3
@@ -501,8 +501,8 @@ rtr_2: addi r4,0,mem_rtr
stb r4,0(r5)
eieio
- mtlr r31 /* restore lr */
- blr
+ mtlr r31 /* restore lr */
+ blr
/*--------------------------------------------------------------------- */
/* Function: read_spd */
@@ -512,21 +512,21 @@ rtr_2: addi r4,0,mem_rtr
#define WRITE_I2C(reg,val) \
addi r3,0,val;\
- addis r4, 0, 0xef60;\
- ori r4, r4, 0x0500 + reg;\
- stb r3, 0(r4);\
- eieio
+ addis r4, 0, 0xef60;\
+ ori r4, r4, 0x0500 + reg;\
+ stb r3, 0(r4);\
+ eieio
#define READ_I2C(reg) \
- addis r3, 0, 0xef60;\
- ori r3, r3, 0x0500 + reg;\
- lbz r3, 0x0000(r3);\
- eieio
+ addis r3, 0, 0xef60;\
+ ori r3, r3, 0x0500 + reg;\
+ lbz r3, 0x0000(r3);\
+ eieio
read_spd:
mflr r5
-
+
/* Initialize i2c */
/*--------------- */
WRITE_I2C(IICLMADR, 0x00) /* clear lo master address */
@@ -558,9 +558,9 @@ read_spd:
/* Wait a little */
/*-------------- */
- addis r3,0,0x0000
- ori r3,r3,0xA000
- mtctr r3
+ addis r3,0,0x0000
+ ori r3,r3,0xA000
+ mtctr r3
in02: bdnz in02
/* Issue write command */
@@ -572,12 +572,12 @@ in02: bdnz in02
/*--------------- */
addi r7, 0, 0 /* byte counter in r7 */
addi r8, 0, 0 /* checksum in r8 */
-rdlp:
+rdlp:
/* issue read command */
/*------------------- */
cmpi 0, r7, 127
blt rd01
- WRITE_I2C(IICCNTL, IIC_CNTL_READ | IIC_CNTL_PT)
+ WRITE_I2C(IICCNTL, IIC_CNTL_READ | IIC_CNTL_PT)
bl rd02
rd01: WRITE_I2C(IICCNTL, IIC_CNTL_READ | IIC_CNTL_CHT | IIC_CNTL_PT)
rd02: bl wait_i2c_transfer_done
@@ -585,46 +585,46 @@ rd02: bl wait_i2c_transfer_done
/* Fetch byte from buffer */
/*----------------------- */
READ_I2C(IICMDBUF)
-
+
/* Retrieve parameters that are going to be used during configuration. */
/* Save them in dedicated registers. */
/*------------------------------------------------------------ */
cmpi 0, r7, 3 /* Save byte 3 in r10 */
bne rd10
- addi r10, r3, 0
+ addi r10, r3, 0
rd10: cmpi 0, r7, 4 /* Save byte 4 in r11 */
bne rd11
- addi r11, r3, 0
+ addi r11, r3, 0
rd11: cmpi 0, r7, 5 /* Save byte 5 in r12 */
bne rd12
- addi r12, r3, 0
+ addi r12, r3, 0
rd12: cmpi 0, r7, 17 /* Save byte 17 in r13 */
bne rd13
- addi r13, r3, 0
+ addi r13, r3, 0
rd13: cmpi 0, r7, 18 /* Save byte 18 in r14 */
bne rd14
- addi r14, r3, 0
+ addi r14, r3, 0
rd14: cmpi 0, r7, 31 /* Save byte 31 in r15 */
bne rd15
- addi r15, r3, 0
+ addi r15, r3, 0
rd15: cmpi 0, r7, 27 /* Save byte 27 in r16 */
bne rd16
- addi r16, r3, 0
+ addi r16, r3, 0
rd16: cmpi 0, r7, 29 /* Save byte 29 in r17 */
bne rd17
- addi r17, r3, 0
+ addi r17, r3, 0
rd17: cmpi 0, r7, 30 /* Save byte 30 in r18 */
bne rd18
- addi r18, r3, 0
+ addi r18, r3, 0
rd18: cmpi 0, r7, 9 /* Save byte 9 in r19 */
bne rd19
- addi r19, r3, 0
+ addi r19, r3, 0
rd19: cmpi 0, r7, 23 /* Save byte 23 in r20 */
bne rd20
- addi r20, r3, 0
+ addi r20, r3, 0
rd20: cmpi 0, r7, 25 /* Save byte 25 in r21 */
bne rd21
- addi r21, r3, 0
+ addi r21, r3, 0
rd21:
/* Calculate checksum of the first 63 bytes */
@@ -647,16 +647,16 @@ rd30: andi. r8, r8, 0xff /* use only 8 bits */
eieio
rderr: bl rderr
-rd31:
-
+rd31:
+
/* Increment byte counter and check whether all bytes have been read. */
/*------------------------------------------------------------------- */
addi r7, r7, 1
cmpi 0, r7, 127
bgt rd05
bl rdlp
-rd05:
- mtlr r5 /* restore lr */
+rd05:
+ mtlr r5 /* restore lr */
blr
wait_i2c_transfer_done:
@@ -664,8 +664,8 @@ wait_i2c_transfer_done:
wt01: READ_I2C(IICSTS)
andi. r4, r3, IIC_STS_PT
cmpi 0, r4, IIC_STS_PT
- beq wt01
- mtlr r6 /* restore lr */
+ beq wt01
+ mtlr r6 /* restore lr */
blr
/*--------------------------------------------------------------------- */
@@ -696,7 +696,7 @@ fm01: cmpi 0, r10, 11
cmpi 0, r13, 2
bne fm02
addi r3, 0, 1
- bl fmfound
+ bl fmfound
fm02: cmpi 0, r10, 12
bne fm03
@@ -815,7 +815,7 @@ fm14: cmpi 0, r10, 13
addi r3, 0, 7
bl fmfound
-fm15:
+fm15:
/* not found, error code to be issued on LEDs */
addi r7, 0, LED_SDRAM_CODE_2
addis r6, 0, 0x1000
@@ -827,7 +827,7 @@ fmerr: bl fmerr
fmfound:addi r6, 0, 1
subf r3, r6, r3
- mtlr r5 /* restore lr */
+ mtlr r5 /* restore lr */
blr
/*--------------------------------------------------------------------- */
@@ -838,13 +838,13 @@ fmfound:addi r6, 0, 1
find_size_code:
mflr r5
-
+
addi r3, r15, 0 /* density */
addi r7, 0, 0
fs01: andi. r6, r3, 0x01
cmpi 0, r6, 1
beq fs04
-
+
addi r7, r7, 1
cmpi 0, r7, 7
bge fs02
@@ -866,7 +866,7 @@ fs04: addi r3, r7, 0
addi r6, 0, 1
subf r3, r6, r3
fs05:
- mtlr r5 /* restore lr */
+ mtlr r5 /* restore lr */
blr
/*--------------------------------------------------------------------- */
@@ -895,9 +895,9 @@ fc01: srw r6, r14, r4 /* */
addi r7, r19, 0 /* SDRAM cycle time for highest CAS latenty */
bl fc03
-fc02:
+fc02:
addi r7, r20, 0 /* SDRAM cycle time for next-highest CAS latenty */
-fc03:
+fc03:
addi r8, r7, 0
addi r9, 0, 4
srw r7, r7, r9
@@ -910,7 +910,7 @@ fc03:
bgt fc05
addi r3, r2, 0
bl fc05
-fc04:
+fc04:
addi r7, r21, 0 /* SDRAM cycle time for third-highest CAS latenty */
addi r8, r7, 0
addi r9, 0, 2
@@ -933,9 +933,9 @@ fc06: addi r6, 0, 1
cmpi 0, r4, 0
bne fc01
-fc07:
+fc07:
- mtlr r5 /* restore lr */
+ mtlr r5 /* restore lr */
blr
#endif
@@ -1000,7 +1000,7 @@ fc07:
/* Size: 2 MB */
/* Usage: read/write */
/* Width: 32 bit */
-
+
/* Walnut fpga pb7ap */
/* 0 1 8 1 5 2 8 0 */
/* 0 + 00000 + 011 + 000 + 00 + 01 + 01 + 01 + 001 + 0 + 1 + 0 + 0 + 00000 */
diff --git a/board/exbitgen/u-boot.lds b/board/exbitgen/u-boot.lds
index 36f9491963..7dd539178e 100644
--- a/board/exbitgen/u-boot.lds
+++ b/board/exbitgen/u-boot.lds
@@ -98,7 +98,7 @@ SECTIONS
PROVIDE (erotext = .);
.reloc :
{
- *(.got)
+ *(.got)
_GOT2_TABLE_ = .;
*(.got2)
_FIXUP_TABLE_ = .;
diff --git a/board/gen860t/gen860t.c b/board/gen860t/gen860t.c
index 4921f5b14d..434055ce67 100644
--- a/board/gen860t/gen860t.c
+++ b/board/gen860t/gen860t.c
@@ -303,7 +303,7 @@ board_poweroff(void)
}
#ifdef CONFIG_POST
-/*
+/*
* Returns 1 if keys pressed to start the power-on long-running tests
* Called from board_init_f().
*/
diff --git a/board/icecube/Makefile b/board/icecube/Makefile
new file mode 100644
index 0000000000..eb5ed591a9
--- /dev/null
+++ b/board/icecube/Makefile
@@ -0,0 +1,47 @@
+
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS := $(BOARD).o flash.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/icecube/config.mk b/board/icecube/config.mk
new file mode 100644
index 0000000000..9913cfb486
--- /dev/null
+++ b/board/icecube/config.mk
@@ -0,0 +1,31 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# IceCube board
+#
+
+TEXT_BASE = 0xfff00000
+# TEXT_BASE = 0x00100000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
diff --git a/board/icecube/flash.c b/board/icecube/flash.c
new file mode 100644
index 0000000000..9164bd9ea1
--- /dev/null
+++ b/board/icecube/flash.c
@@ -0,0 +1,480 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
+ * has nothing to do with the flash chip being 8-bit or 16-bit.
+ */
+#ifdef CONFIG_FLASH_16BIT
+typedef unsigned short FLASH_PORT_WIDTH;
+typedef volatile unsigned short FLASH_PORT_WIDTHV;
+#define FLASH_ID_MASK 0xFFFF
+#else
+typedef unsigned char FLASH_PORT_WIDTH;
+typedef volatile unsigned char FLASH_PORT_WIDTHV;
+#define FLASH_ID_MASK 0xFF
+#endif
+
+#define FPW FLASH_PORT_WIDTH
+#define FPWV FLASH_PORT_WIDTHV
+
+#define ORMASK(size) ((-size) & OR_AM_MSK)
+
+#define FLASH_CYCLE1 0x0555
+#define FLASH_CYCLE2 0x02aa
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(FPWV *addr, flash_info_t *info);
+static void flash_reset(flash_info_t *info);
+static int write_word_amd(flash_info_t *info, FPWV *dest, FPW data);
+static flash_info_t *flash_get_info(ulong base);
+
+/*-----------------------------------------------------------------------
+ * flash_init()
+ *
+ * sets up flash_info and returns size of FLASH (bytes)
+ */
+unsigned long flash_init (void)
+{
+ unsigned long size = 0;
+ int i;
+ extern void flash_preinit(void);
+
+ flash_preinit();
+
+ /* Init: no FLASHes known */
+ for (i=0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ ulong flashbase = CFG_FLASH_BASE;
+
+ memset(&flash_info[i], 0, sizeof(flash_info_t));
+
+ flash_info[i].size =
+ flash_get_size((FPW *)flashbase, &flash_info[i]);
+
+ if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx\n",
+ i, flash_info[i].size);
+ }
+
+ size += flash_info[i].size;
+ }
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+monitor_flash_len-1,
+ flash_get_info(CFG_MONITOR_BASE));
+#endif
+
+#ifdef CFG_ENV_IS_IN_FLASH
+ /* ENV protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR+CFG_ENV_SIZE-1,
+ flash_get_info(CFG_ENV_ADDR));
+#endif
+
+
+ return size ? size : 1;
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_reset(flash_info_t *info)
+{
+ FPWV *base = (FPWV *)(info->start[0]);
+
+ /* Put FLASH back in read mode */
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
+ *base = (FPW)0x00FF00FF; /* Intel Read Mode */
+ else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
+ *base = (FPW)0x00F000F0; /* AMD Read Mode */
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+static flash_info_t *flash_get_info(ulong base)
+{
+ int i;
+ flash_info_t * info;
+
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
+ info = & flash_info[i];
+ if (info->start[0] <= base && base <= info->start[0] + info->size - 1)
+ break;
+ }
+
+ return i == CFG_MAX_FLASH_BANKS ? 0 : info;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+ uchar *boottype;
+ uchar *bootletter;
+ uchar *fmt;
+ uchar botbootletter[] = "B";
+ uchar topbootletter[] = "T";
+ uchar botboottype[] = "bottom boot sector";
+ uchar topboottype[] = "top boot sector";
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD: printf ("AMD "); break;
+ case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break;
+ case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
+ case FLASH_MAN_SST: printf ("SST "); break;
+ case FLASH_MAN_STM: printf ("STM "); break;
+ case FLASH_MAN_INTEL: printf ("INTEL "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ /* check for top or bottom boot, if it applies */
+ if (info->flash_id & FLASH_BTYPE) {
+ boottype = botboottype;
+ bootletter = botbootletter;
+ }
+ else {
+ boottype = topboottype;
+ bootletter = topbootletter;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AMDLV065D:
+ fmt = "29LV065 (64 Mbit, uniform sectors)\n";
+ break;
+ default:
+ fmt = "Unknown Chip Type\n";
+ break;
+ }
+
+ printf (fmt, bootletter, boottype);
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20,
+ info->sector_count);
+
+ printf (" Sector Start Addresses:");
+
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0) {
+ printf ("\n ");
+ }
+
+ printf (" %08lX%s", info->start[i],
+ info->protect[i] ? " (RO)" : " ");
+ }
+
+ printf ("\n");
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+ulong flash_get_size (FPWV *addr, flash_info_t *info)
+{
+ int i;
+ /* Write auto select command: read Manufacturer ID */
+ /* Write auto select command sequence and test FLASH answer */
+ addr[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* for AMD, Intel ignores this */
+ addr[FLASH_CYCLE2] = (FPW)0x00550055; /* for AMD, Intel ignores this */
+ addr[FLASH_CYCLE1] = (FPW)0x00900090; /* selects Intel or AMD */
+
+ /* The manufacturer codes are only 1 byte, so just use 1 byte.
+ * This works for any bus width and any FLASH device width.
+ */
+ udelay(100);
+ switch (addr[0] & 0xff) {
+
+ case (uchar)AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+
+ case (uchar)INTEL_MANUFACT:
+ info->flash_id = FLASH_MAN_INTEL;
+ break;
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ break;
+ }
+
+ /* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
+ if (info->flash_id != FLASH_UNKNOWN) switch ((FPW)addr[1]) {
+
+ case (FPW)AMD_ID_LV065D:
+ info->flash_id += FLASH_AMDLV065D;
+ info->sector_count = 128;
+ info->size = 0x00800000;
+ for( i = 0; i < info->sector_count; i++ )
+ info->start[i] = (ulong)addr + (i * 0x10000);
+ break; /* => 8 or 16 MB */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* => no or unknown flash */
+ }
+
+ /* Put FLASH back in read mode */
+ flash_reset(info);
+
+ return (info->size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ FPWV *addr;
+ int flag, prot, sect;
+ int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL;
+ ulong start, now, last;
+ int rcode = 0;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AMDLV065D:
+ break;
+ case FLASH_UNKNOWN:
+ default:
+ printf ("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ last = get_timer(0);
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last && rcode == 0; sect++) {
+
+ if (info->protect[sect] != 0) /* protected, skip it */
+ continue;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr = (FPWV *)(info->start[sect]);
+ if (intel) {
+ *addr = (FPW)0x00500050; /* clear status register */
+ *addr = (FPW)0x00200020; /* erase setup */
+ *addr = (FPW)0x00D000D0; /* erase confirm */
+ }
+ else {
+ /* must be AMD style if not Intel */
+ FPWV *base; /* first address in bank */
+
+ base = (FPWV *)(info->start[0]);
+ base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */
+ base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */
+ base[FLASH_CYCLE1] = (FPW)0x00800080; /* erase mode */
+ base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */
+ base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */
+ *addr = (FPW)0x00300030; /* erase sector */
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ start = get_timer(0);
+
+ /* wait at least 50us for AMD, 80us for Intel.
+ * Let's wait 1 ms.
+ */
+ udelay (1000);
+
+ while ((*addr & (FPW)0x00800080) != (FPW)0x00800080) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+
+ if (intel) {
+ /* suspend erase */
+ *addr = (FPW)0x00B000B0;
+ }
+
+ flash_reset(info); /* reset to read mode */
+ rcode = 1; /* failed */
+ break;
+ }
+
+ /* show that we're waiting */
+ if ((get_timer(last)) > CFG_HZ) {/* every second */
+ putc ('.');
+ last = get_timer(0);
+ }
+ }
+
+ /* show that we're waiting */
+ if ((get_timer(last)) > CFG_HZ) { /* every second */
+ putc ('.');
+ last = get_timer(0);
+ }
+
+ flash_reset(info); /* reset to read mode */
+ }
+
+ printf (" done\n");
+ return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */
+ int bytes; /* number of bytes to program in current word */
+ int left; /* number of bytes left to program */
+ int i, res;
+
+ for (left = cnt, res = 0;
+ left > 0 && res == 0;
+ addr += sizeof(data), left -= sizeof(data) - bytes) {
+
+ bytes = addr & (sizeof(data) - 1);
+ addr &= ~(sizeof(data) - 1);
+
+ /* combine source and destination data so can program
+ * an entire word of 16 or 32 bits
+ */
+ for (i = 0; i < sizeof(data); i++) {
+ data <<= 8;
+ if (i < bytes || i - bytes >= left )
+ data += *((uchar *)addr + i);
+ else
+ data += *src++;
+ }
+
+ /* write one word to the flash */
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD:
+ res = write_word_amd(info, (FPWV *)addr, data);
+ break;
+ default:
+ /* unknown flash type, error! */
+ printf ("missing or unknown FLASH type\n");
+ res = 1; /* not really a timeout, but gives error */
+ break;
+ }
+ }
+
+ return (res);
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash for AMD FLASH
+ * A word is 16 or 32 bits, whichever the bus width of the flash bank
+ * (not an individual chip) is.
+ *
+ * returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data)
+{
+ ulong start;
+ int flag;
+ int res = 0; /* result, assume success */
+ FPWV *base; /* first address in flash bank */
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*dest & data) != data) {
+ return (2);
+ }
+
+
+ base = (FPWV *)(info->start[0]);
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */
+ base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */
+ base[FLASH_CYCLE1] = (FPW)0x00A000A0; /* selects program mode */
+
+ *dest = data; /* start programming the data */
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ start = get_timer (0);
+
+ /* data polling for D7 */
+ while (res == 0 && (*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ *dest = (FPW)0x00F000F0; /* reset bank */
+ res = 1;
+ }
+ }
+
+ return (res);
+}
diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c
new file mode 100644
index 0000000000..916e78055e
--- /dev/null
+++ b/board/icecube/icecube.c
@@ -0,0 +1,116 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc5xxx.h>
+
+long int initdram (int board_type)
+{
+#ifndef CFG_RAMBOOT
+ /* configure SDRAM start/end */
+#if defined(CONFIG_MPC5200)
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x00000018;/* 32M at 0x0 */
+ *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x02000000;/* disabled */
+
+ /* setup config registers */
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = 0xc2233a00;
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = 0x88b70004;
+
+ /* unlock mode register */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0000;
+ /* precharge all banks */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0002;
+ /* set mode register */
+ *(vu_long *)MPC5XXX_SDRAM_MODE = 0x408d0000;
+ /* precharge all banks */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0002;
+ /* auto refresh */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0004;
+ /* set mode register */
+ *(vu_long *)MPC5XXX_SDRAM_MODE = 0x008d0000;
+ /* normal operation */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = 0x504f0000;
+#elif defined(CONFIG_MGT5100)
+ *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
+ *(vu_long *)MPC5XXX_SDRAM_STOP = 0x000007ff;/* 64M */
+ *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
+
+ /* setup config registers */
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = 0xc2222600;
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = 0x88b70004;
+
+ /* address select register */
+ *(vu_long *)MPC5XXX_SDRAM_XLBSEL = 0x03000000;
+
+ /* unlock mode register */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd14f0000;
+ /* precharge all banks */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd14f0002;
+ /* set mode register */
+ *(vu_long *)MPC5XXX_SDRAM_MODE = 0x008d0000;
+ /* precharge all banks */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd14f0002;
+ /* auto refresh */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd14f0004;
+ /* set mode register */
+ *(vu_long *)MPC5XXX_SDRAM_MODE = 0x008d0000;
+ /* normal operation */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = 0x514f0000;
+#endif
+#else
+#ifdef CONFIG_MGT5100
+ *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
+#endif
+#endif
+ /* return total ram size */
+#if defined(CONFIG_MGT5100)
+ return (64 * 1024 * 1024);
+#elif defined(CONFIG_MPC5200)
+ return (32 * 1024 * 1024);
+#endif
+}
+
+int checkboard (void)
+{
+#if defined(CONFIG_MPC5200)
+ puts ("Board: Motorola MPC5200 (IceCube)\n");
+#elif defined(CONFIG_MGT5100)
+ puts ("Board: Motorola MGT5100 (IceCube)\n");
+#endif
+ return 0;
+}
+
+void flash_preinit(void)
+{
+ /*
+ * Now, when we are in RAM, enable flash write
+ * access for detection process.
+ * Note that CS_BOOT cannot be cleared when
+ * executing in flash.
+ */
+#if defined(CONFIG_MGT5100)
+ *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */
+ *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */
+#endif
+ *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
+}
diff --git a/board/icecube/u-boot.lds b/board/icecube/u-boot.lds
new file mode 100644
index 0000000000..d999dd16ad
--- /dev/null
+++ b/board/icecube/u-boot.lds
@@ -0,0 +1,122 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc5xxx/start.o (.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c
index cf824082cf..b869bf3460 100644
--- a/board/lwmon/lwmon.c
+++ b/board/lwmon/lwmon.c
@@ -1073,7 +1073,7 @@ static int key_pressed(void)
#endif /* CONFIG_MODEM_SUPPORT */
#ifdef CONFIG_POST
-/*
+/*
* Returns 1 if keys pressed to start the power-on long-running tests
* Called from board_init_f().
*/
diff --git a/board/omap1510inn/platform.S b/board/omap1510inn/platform.S
index 6bad32d4bb..a1602d14c6 100644
--- a/board/omap1510inn/platform.S
+++ b/board/omap1510inn/platform.S
@@ -42,171 +42,171 @@ _TEXT_BASE:
.globl platformsetup
platformsetup:
- /*
- * Configure 1510 pins functions to match our board.
- */
- ldr r0, REG_PULL_DWN_CTRL_0
- ldr r1, VAL_PULL_DWN_CTRL_0
- str r1, [r0]
- ldr r0, REG_PULL_DWN_CTRL_1
- ldr r1, VAL_PULL_DWN_CTRL_1
- str r1, [r0]
- ldr r0, REG_PULL_DWN_CTRL_2
- ldr r1, VAL_PULL_DWN_CTRL_2
- str r1, [r0]
- ldr r0, REG_PULL_DWN_CTRL_3
- ldr r1, VAL_PULL_DWN_CTRL_3
- str r1, [r0]
- ldr r0, REG_FUNC_MUX_CTRL_4
- ldr r1, VAL_FUNC_MUX_CTRL_4
- str r1, [r0]
- ldr r0, REG_FUNC_MUX_CTRL_5
- ldr r1, VAL_FUNC_MUX_CTRL_5
- str r1, [r0]
- ldr r0, REG_FUNC_MUX_CTRL_6
- ldr r1, VAL_FUNC_MUX_CTRL_6
- str r1, [r0]
- ldr r0, REG_FUNC_MUX_CTRL_7
- ldr r1, VAL_FUNC_MUX_CTRL_7
- str r1, [r0]
- ldr r0, REG_FUNC_MUX_CTRL_8
- ldr r1, VAL_FUNC_MUX_CTRL_8
- str r1, [r0]
- ldr r0, REG_FUNC_MUX_CTRL_9
- ldr r1, VAL_FUNC_MUX_CTRL_9
- str r1, [r0]
- ldr r0, REG_FUNC_MUX_CTRL_A
- ldr r1, VAL_FUNC_MUX_CTRL_A
- str r1, [r0]
- ldr r0, REG_FUNC_MUX_CTRL_B
- ldr r1, VAL_FUNC_MUX_CTRL_B
- str r1, [r0]
- ldr r0, REG_FUNC_MUX_CTRL_C
- ldr r1, VAL_FUNC_MUX_CTRL_C
- str r1, [r0]
- ldr r0, REG_VOLTAGE_CTRL_0
- ldr r1, VAL_VOLTAGE_CTRL_0
- str r1, [r0]
- ldr r0, REG_TEST_DBG_CTRL_0
- ldr r1, VAL_TEST_DBG_CTRL_0
- str r1, [r0]
- ldr r0, REG_MOD_CONF_CTRL_0
- ldr r1, VAL_MOD_CONF_CTRL_0
- str r1, [r0]
+ /*
+ * Configure 1510 pins functions to match our board.
+ */
+ ldr r0, REG_PULL_DWN_CTRL_0
+ ldr r1, VAL_PULL_DWN_CTRL_0
+ str r1, [r0]
+ ldr r0, REG_PULL_DWN_CTRL_1
+ ldr r1, VAL_PULL_DWN_CTRL_1
+ str r1, [r0]
+ ldr r0, REG_PULL_DWN_CTRL_2
+ ldr r1, VAL_PULL_DWN_CTRL_2
+ str r1, [r0]
+ ldr r0, REG_PULL_DWN_CTRL_3
+ ldr r1, VAL_PULL_DWN_CTRL_3
+ str r1, [r0]
+ ldr r0, REG_FUNC_MUX_CTRL_4
+ ldr r1, VAL_FUNC_MUX_CTRL_4
+ str r1, [r0]
+ ldr r0, REG_FUNC_MUX_CTRL_5
+ ldr r1, VAL_FUNC_MUX_CTRL_5
+ str r1, [r0]
+ ldr r0, REG_FUNC_MUX_CTRL_6
+ ldr r1, VAL_FUNC_MUX_CTRL_6
+ str r1, [r0]
+ ldr r0, REG_FUNC_MUX_CTRL_7
+ ldr r1, VAL_FUNC_MUX_CTRL_7
+ str r1, [r0]
+ ldr r0, REG_FUNC_MUX_CTRL_8
+ ldr r1, VAL_FUNC_MUX_CTRL_8
+ str r1, [r0]
+ ldr r0, REG_FUNC_MUX_CTRL_9
+ ldr r1, VAL_FUNC_MUX_CTRL_9
+ str r1, [r0]
+ ldr r0, REG_FUNC_MUX_CTRL_A
+ ldr r1, VAL_FUNC_MUX_CTRL_A
+ str r1, [r0]
+ ldr r0, REG_FUNC_MUX_CTRL_B
+ ldr r1, VAL_FUNC_MUX_CTRL_B
+ str r1, [r0]
+ ldr r0, REG_FUNC_MUX_CTRL_C
+ ldr r1, VAL_FUNC_MUX_CTRL_C
+ str r1, [r0]
+ ldr r0, REG_VOLTAGE_CTRL_0
+ ldr r1, VAL_VOLTAGE_CTRL_0
+ str r1, [r0]
+ ldr r0, REG_TEST_DBG_CTRL_0
+ ldr r1, VAL_TEST_DBG_CTRL_0
+ str r1, [r0]
+ ldr r0, REG_MOD_CONF_CTRL_0
+ ldr r1, VAL_MOD_CONF_CTRL_0
+ str r1, [r0]
- /* Move to 1510 mode */
- ldr r0, REG_COMP_MODE_CTRL_0
- ldr r1, VAL_COMP_MODE_CTRL_0
- str r1, [r0]
+ /* Move to 1510 mode */
+ ldr r0, REG_COMP_MODE_CTRL_0
+ ldr r1, VAL_COMP_MODE_CTRL_0
+ str r1, [r0]
- /* Set up Traffic Ctlr*/
- ldr r0, REG_TC_IMIF_PRIO
- mov r1, #0x0
- str r1, [r0]
- ldr r0, REG_TC_EMIFS_PRIO
- str r1, [r0]
- ldr r0, REG_TC_EMIFF_PRIO
- str r1, [r0]
+ /* Set up Traffic Ctlr*/
+ ldr r0, REG_TC_IMIF_PRIO
+ mov r1, #0x0
+ str r1, [r0]
+ ldr r0, REG_TC_EMIFS_PRIO
+ str r1, [r0]
+ ldr r0, REG_TC_EMIFF_PRIO
+ str r1, [r0]
- ldr r0, REG_TC_EMIFS_CONFIG
- ldr r1, [r0]
- bic r1, r1, #0x08 /* clear the global power-down enable PDE bit */
- bic r1, r1, #0x01 /* write protect flash by clearing the WP bit */
- str r1, [r0] /* EMIFS GlB Configuration. (value 0x12 most likely) */
+ ldr r0, REG_TC_EMIFS_CONFIG
+ ldr r1, [r0]
+ bic r1, r1, #0x08 /* clear the global power-down enable PDE bit */
+ bic r1, r1, #0x01 /* write protect flash by clearing the WP bit */
+ str r1, [r0] /* EMIFS GlB Configuration. (value 0x12 most likely) */
- /* Setup some clock domains */
- ldr r1, =OMAP1510_CLKS
- ldr r0, REG_ARM_IDLECT2
- strh r1, [r0] /* CLKM, Clock domain control. */
+ /* Setup some clock domains */
+ ldr r1, =OMAP1510_CLKS
+ ldr r0, REG_ARM_IDLECT2
+ strh r1, [r0] /* CLKM, Clock domain control. */
- mov r1, #0x01 /* PER_EN bit */
- ldr r0, REG_ARM_RSTCT2
- strh r1, [r0] /* CLKM; Peripheral reset. */
+ mov r1, #0x01 /* PER_EN bit */
+ ldr r0, REG_ARM_RSTCT2
+ strh r1, [r0] /* CLKM; Peripheral reset. */
- /* Set CLKM to Sync-Scalable */
- /* I supposidly need to enable the dsp clock before switching */
- mov r1, #0x1000
- ldr r0, REG_ARM_SYSST
- strh r1, [r0]
- mov r0, #0x400
+ /* Set CLKM to Sync-Scalable */
+ /* I supposidly need to enable the dsp clock before switching */
+ mov r1, #0x1000
+ ldr r0, REG_ARM_SYSST
+ strh r1, [r0]
+ mov r0, #0x400
1:
- subs r0, r0, #0x1 /* wait for any bubbles to finish */
- bne 1b
+ subs r0, r0, #0x1 /* wait for any bubbles to finish */
+ bne 1b
- ldr r1, VAL_ARM_CKCTL /* use 12Mhz ref, PER must be <= 50Mhz so /2 */
- ldr r0, REG_ARM_CKCTL
- strh r1, [r0]
+ ldr r1, VAL_ARM_CKCTL /* use 12Mhz ref, PER must be <= 50Mhz so /2 */
+ ldr r0, REG_ARM_CKCTL
+ strh r1, [r0]
- /* setup DPLL 1 */
- ldr r1, VAL_DPLL1_CTL
- ldr r0, REG_DPLL1_CTL
- strh r1, [r0]
- ands r1, r1, #0x10 /* Check if PLL is enabled. */
- beq lock_end /* Do not look for lock if BYPASS selected */
+ /* setup DPLL 1 */
+ ldr r1, VAL_DPLL1_CTL
+ ldr r0, REG_DPLL1_CTL
+ strh r1, [r0]
+ ands r1, r1, #0x10 /* Check if PLL is enabled. */
+ beq lock_end /* Do not look for lock if BYPASS selected */
2:
- ldrh r1, [r0]
- ands r1, r1, #0x01 /* Check the LOCK bit. */
- beq 2b /* ...loop until bit goes hi. */
+ ldrh r1, [r0]
+ ands r1, r1, #0x01 /* Check the LOCK bit. */
+ beq 2b /* ...loop until bit goes hi. */
lock_end:
- /* Set memory timings corresponding to the new clock speed */
+ /* Set memory timings corresponding to the new clock speed */
- /* Check execution location to determine current execution location
- * and branch to appropriate initialization code.
- */
- mov r0, #0x10000000 /* Load physical SDRAM base. */
- mov r1, pc /* Get current execution location. */
- cmp r1, r0 /* Compare. */
- bge skip_sdram /* Skip over EMIF-fast initialization if running from SDRAM. */
+ /* Check execution location to determine current execution location
+ * and branch to appropriate initialization code.
+ */
+ mov r0, #0x10000000 /* Load physical SDRAM base. */
+ mov r1, pc /* Get current execution location. */
+ cmp r1, r0 /* Compare. */
+ bge skip_sdram /* Skip over EMIF-fast initialization if running from SDRAM. */
- /*
- * Delay for SDRAM initialization.
- */
- mov r3, #0x1800 /* value should be checked */
+ /*
+ * Delay for SDRAM initialization.
+ */
+ mov r3, #0x1800 /* value should be checked */
3:
- subs r3, r3, #0x1 /* Decrement count */
- bne 3b
+ subs r3, r3, #0x1 /* Decrement count */
+ bne 3b
- /*
- * Set SDRAM control values. Disable refresh before MRS command.
- */
- ldr r0, VAL_TC_EMIFF_SDRAM_CONFIG /* get good value */
- bic r3, r0, #0xC /* (BIT3|BIT2) ulConfig with auto-refresh disabled. */
- orr r3, r3, #0x8000000 /* (BIT27) Disable CLK when Power down or Self-Refresh */
- orr r3, r3, #0x4000000 /* BIT26 Power Down Enable */
- ldr r2, REG_TC_EMIFF_SDRAM_CONFIG /* Point to configuration register. */
- str r3, [r2] /* Store the passed value with AR disabled. */
+ /*
+ * Set SDRAM control values. Disable refresh before MRS command.
+ */
+ ldr r0, VAL_TC_EMIFF_SDRAM_CONFIG /* get good value */
+ bic r3, r0, #0xC /* (BIT3|BIT2) ulConfig with auto-refresh disabled. */
+ orr r3, r3, #0x8000000 /* (BIT27) Disable CLK when Power down or Self-Refresh */
+ orr r3, r3, #0x4000000 /* BIT26 Power Down Enable */
+ ldr r2, REG_TC_EMIFF_SDRAM_CONFIG /* Point to configuration register. */
+ str r3, [r2] /* Store the passed value with AR disabled. */
- ldr r1, VAL_TC_EMIFF_MRS /* get MRS value */
- ldr r2, REG_TC_EMIFF_MRS /* Point to MRS register. */
- str r1, [r2] /* Store the passed value.*/
+ ldr r1, VAL_TC_EMIFF_MRS /* get MRS value */
+ ldr r2, REG_TC_EMIFF_MRS /* Point to MRS register. */
+ str r1, [r2] /* Store the passed value.*/
- ldr r2, REG_TC_EMIFF_SDRAM_CONFIG /* Point to configuration register. */
- str r0, [r2] /* Store the passed value. */
+ ldr r2, REG_TC_EMIFF_SDRAM_CONFIG /* Point to configuration register. */
+ str r0, [r2] /* Store the passed value. */
- /*
- * Delay for SDRAM initialization.
- */
- mov r3, #0x1800
+ /*
+ * Delay for SDRAM initialization.
+ */
+ mov r3, #0x1800
4:
- subs r3, r3, #1 /* Decrement count. */
- bne 4b
+ subs r3, r3, #1 /* Decrement count. */
+ bne 4b
skip_sdram:
- /* slow interface */
- ldr r1, VAL_TC_EMIFS_CS0_CONFIG
- ldr r0, REG_TC_EMIFS_CS0_CONFIG
- str r1, [r0] /* Chip Select 0 */
- ldr r1, VAL_TC_EMIFS_CS1_CONFIG
- ldr r0, REG_TC_EMIFS_CS1_CONFIG
- str r1, [r0] /* Chip Select 1 */
- ldr r1, VAL_TC_EMIFS_CS2_CONFIG
- ldr r0, REG_TC_EMIFS_CS2_CONFIG
- str r1, [r0] /* Chip Select 2 */
- ldr r1, VAL_TC_EMIFS_CS3_CONFIG
- ldr r0, REG_TC_EMIFS_CS3_CONFIG
- str r1, [r0] /* Chip Select 3 */
+ /* slow interface */
+ ldr r1, VAL_TC_EMIFS_CS0_CONFIG
+ ldr r0, REG_TC_EMIFS_CS0_CONFIG
+ str r1, [r0] /* Chip Select 0 */
+ ldr r1, VAL_TC_EMIFS_CS1_CONFIG
+ ldr r0, REG_TC_EMIFS_CS1_CONFIG
+ str r1, [r0] /* Chip Select 1 */
+ ldr r1, VAL_TC_EMIFS_CS2_CONFIG
+ ldr r0, REG_TC_EMIFS_CS2_CONFIG
+ str r1, [r0] /* Chip Select 2 */
+ ldr r1, VAL_TC_EMIFS_CS3_CONFIG
+ ldr r0, REG_TC_EMIFS_CS3_CONFIG
+ str r1, [r0] /* Chip Select 3 */
/* Next, Enable the RS232 Line Drivers in the FPGA. */
/* Also, power on the audio CODEC's amplifier here, */
@@ -217,22 +217,22 @@ skip_sdram:
/* Also, disable the CODEC's clocks. */
/* omap1510-HelenP1 [specific] */
- ldr r0, REG_FPGA_POWER
- mov r1, #0
- ldr r2, REG_FPGA_DIP_SWITCH
- ldrb r3, [r2]
- cmp r3, #0x8
- movne r1, #0x62 /* Enable the RS232 Line Drivers in the EPLD */
- strb r1, [r0]
- ldr r0, REG_FPGA_AUDIO
- mov r1, #0x0 /* Disable sound driver (CODEC clocks) */
- strb r1, [r0]
+ ldr r0, REG_FPGA_POWER
+ mov r1, #0
+ ldr r2, REG_FPGA_DIP_SWITCH
+ ldrb r3, [r2]
+ cmp r3, #0x8
+ movne r1, #0x62 /* Enable the RS232 Line Drivers in the EPLD */
+ strb r1, [r0]
+ ldr r0, REG_FPGA_AUDIO
+ mov r1, #0x0 /* Disable sound driver (CODEC clocks) */
+ strb r1, [r0]
- /* back to arch calling code */
+ /* back to arch calling code */
mov pc, lr
/* the literal pools origin */
- .ltorg
+ .ltorg
/* OMAP configuration registers */
REG_FUNC_MUX_CTRL_0: /* 32 bits */
@@ -288,13 +288,13 @@ REG_TC_EMIFF_PRIO: /* 32 bits */
REG_TC_EMIFS_CONFIG: /* 32 bits */
.word 0xfffecc0c
REG_TC_EMIFS_CS0_CONFIG: /* 32 bits */
- .word 0xfffecc10
+ .word 0xfffecc10
REG_TC_EMIFS_CS1_CONFIG: /* 32 bits */
- .word 0xfffecc14
+ .word 0xfffecc14
REG_TC_EMIFS_CS2_CONFIG: /* 32 bits */
- .word 0xfffecc18
+ .word 0xfffecc18
REG_TC_EMIFS_CS3_CONFIG: /* 32 bits */
- .word 0xfffecc1c
+ .word 0xfffecc1c
REG_TC_EMIFF_SDRAM_CONFIG: /* 32 bits */
.word 0xfffecc20
REG_TC_EMIFF_MRS: /* 32 bits */
@@ -303,27 +303,27 @@ REG_TC_EMIFF_MRS: /* 32 bits */
REG_ARM_CKCTL: /* 16 bits */
.word 0xfffece00
REG_ARM_IDLECT2: /* 16 bits */
- .word 0xfffece08
+ .word 0xfffece08
REG_ARM_RSTCT2: /* 16 bits */
- .word 0xfffece14
+ .word 0xfffece14
REG_ARM_SYSST: /* 16 bits */
- .word 0xfffece18
+ .word 0xfffece18
/* DPLL control registers */
REG_DPLL1_CTL: /* 16 bits */
.word 0xfffecf00
/* identification code register */
REG_IDCODE: /* 32 bits */
- .word 0xfffed404
+ .word 0xfffed404
/* Innovator specific */
REG_FPGA_LED_DIGIT: /* 8 bits (not used on Innovator) */
- .word 0x08000003
+ .word 0x08000003
REG_FPGA_POWER: /* 8 bits */
- .word 0x08000005
+ .word 0x08000005
REG_FPGA_AUDIO: /* 8 bits (not used on Innovator) */
.word 0x0800000c
REG_FPGA_DIP_SWITCH: /* 8 bits (not used on Innovator) */
- .word 0x0800000e
+ .word 0x0800000e
VAL_COMP_MODE_CTRL_0:
.word 0x0000eaef
@@ -359,8 +359,8 @@ VAL_VOLTAGE_CTRL_0:
.word 0x00000007
VAL_TEST_DBG_CTRL_0:
/* See Errata 4.13, This works around a SRAM bug, for chips below ES2.5 .
- * This slows down internal SRAM accesses.
- */
+ * This slows down internal SRAM accesses.
+ */
.word 0x00000007
VAL_MOD_CONF_CTRL_0:
.word 0x0b000008
diff --git a/board/omap1510inn/u-boot.lds b/board/omap1510inn/u-boot.lds
index caa1d24b4f..46cf9dc556 100644
--- a/board/omap1510inn/u-boot.lds
+++ b/board/omap1510inn/u-boot.lds
@@ -27,23 +27,23 @@ OUTPUT_ARCH(arm)
ENTRY(_start)
SECTIONS
{
- . = 0x00000000;
+ . = 0x00000000;
- . = ALIGN(4);
+ . = ALIGN(4);
.text :
{
cpu/arm925t/start.o (.text)
*(.text)
}
- . = ALIGN(4);
- .rodata : { *(.rodata) }
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
- . = ALIGN(4);
- .data : { *(.data) }
+ . = ALIGN(4);
+ .data : { *(.data) }
- . = ALIGN(4);
- .got : { *(.got) }
+ . = ALIGN(4);
+ .got : { *(.got) }
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
@@ -51,8 +51,8 @@ SECTIONS
armboot_end_data = .;
- . = ALIGN(4);
- .bss : { *(.bss) }
+ . = ALIGN(4);
+ .bss : { *(.bss) }
armboot_end = .;
}
diff --git a/board/sacsng/sacsng.c b/board/sacsng/sacsng.c
index 79d56f33b0..eb7e416df5 100644
--- a/board/sacsng/sacsng.c
+++ b/board/sacsng/sacsng.c
@@ -818,7 +818,7 @@ int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]);
#endif /* CONFIG_MISC_INIT_R */
#ifdef CONFIG_POST
-/*
+/*
* Returns 1 if keys pressed to start the power-on long-running tests
* Called from board_init_f().
*/
diff --git a/board/sl8245/u-boot.lds b/board/sl8245/u-boot.lds
index e0d0b17634..6bd865e8cc 100644
--- a/board/sl8245/u-boot.lds
+++ b/board/sl8245/u-boot.lds
@@ -129,4 +129,3 @@ SECTIONS
_end = . ;
PROVIDE (end = .);
}
-
diff --git a/board/tqm8xx/flash.c b/board/tqm8xx/flash.c
index 6ce6235d3f..d949c2eb6b 100644
--- a/board/tqm8xx/flash.c
+++ b/board/tqm8xx/flash.c
@@ -305,7 +305,7 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
info->sector_count = 64;
info->size = 0x00800000; /* => 8 MB */
break;
- }
+ }
switch(addr[14]) {
case AMD_ID_LV128U_2:
if (addr[15] != AMD_ID_LV128U_3) {
OpenPOWER on IntegriCloud