arm: ls1021a: Add QSPI or IFC support in SD boot

As QSPI and IFC are pin-multiplexed on LS1021A, only IFC is supported in
SD boot now. For the customer's demand, QSPI needs to be supported in SD
boot too.

This patch adds QSPI or IFC support in SD boot according to the
corresponding defconfig. For detail, ls1021atwr_sdcard_ifc_defconfig is
used to support IFC in SD boot and ls1021atwr_sdcard_qspi_defconfig is
used to support QSPI in SD boot.

Signed-off-by: Alison Wang <alison.wang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>

5 files changed, 25 insertions, 22 deletions

diff --git a/board/freescale/ls1021atwr/MAINTAINERS b/board/freescale/ls1021atwr/MAINTAINERS
index e9f6f0a973..b997bb00ec 100644
--- a/board/freescale/ls1021atwr/MAINTAINERS
+++ b/board/freescale/ls1021atwr/MAINTAINERS
@@ -6,5 +6,6 @@ F:	include/configs/ls1021atwr.h
 F:	configs/ls1021atwr_nor_defconfig
 F:	configs/ls1021atwr_nor_SECURE_BOOT_defconfig
 F:	configs/ls1021atwr_nor_lpuart_defconfig
-F:	configs/ls1021atwr_sdcard_defconfig
+F:	configs/ls1021atwr_sdcard_ifc_defconfig
+F:	configs/ls1021atwr_sdcard_qspi_defconfig
 F:	configs/ls1021atwr_qspi_defconfig
diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c
index 228dbf81bb..9d3457ba19 100644
--- a/board/freescale/ls1021atwr/ls1021atwr.c
+++ b/board/freescale/ls1021atwr/ls1021atwr.c
@@ -175,7 +175,7 @@ struct cpld_data {
 	u8 rev2;		/* Reserved */
 };
 
-#ifndef CONFIG_QSPI_BOOT
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 static void convert_serdes_mux(int type, int need_reset);
 
 void cpld_show(void)
@@ -216,7 +216,7 @@ void cpld_show(void)
 int checkboard(void)
 {
 	puts("Board: LS1021ATWR\n");
-#ifndef CONFIG_QSPI_BOOT
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 	cpld_show();
 #endif
 
@@ -380,7 +380,7 @@ int board_eth_init(bd_t *bis)
 }
 #endif
 
-#ifndef CONFIG_QSPI_BOOT
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 int config_serdes_mux(void)
 {
 	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
@@ -414,7 +414,7 @@ int config_serdes_mux(void)
 }
 #endif
 
-#ifndef CONFIG_QSPI_BOOT
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 int config_board_mux(void)
 {
 	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
@@ -627,7 +627,7 @@ int board_init(void)
 {
 #ifndef CONFIG_SYS_FSL_NO_SERDES
 	fsl_serdes_init();
-#ifndef CONFIG_QSPI_BOOT
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 	config_serdes_mux();
 #endif
 #endif
@@ -657,7 +657,7 @@ int misc_init_r(void)
 #ifdef CONFIG_FSL_DEVICE_DISABLE
 	device_disable(devdis_tbl, ARRAY_SIZE(devdis_tbl));
 #endif
-#ifndef CONFIG_QSPI_BOOT
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 	config_board_mux();
 #endif
 
@@ -706,7 +706,7 @@ u16 flash_read16(void *addr)
 	return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00);
 }
 
-#ifndef CONFIG_QSPI_BOOT
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 static void convert_flash_bank(char bank)
 {
 	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
diff --git a/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg b/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg
deleted file mode 100644
index 9c3e3b080b..0000000000
--- a/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg
+++ /dev/null
@@ -1,14 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 01ee0100
-
-#enable IFC, disable QSPI and DSPI
-0608000a 00000000 00000000 00000000
-20000000 00407900 60040a00 21046000
-00000000 00000000 00000000 00038000
-00080000 881b7340 00000000 00000000
-
-#disable IFC, enable QSPI and DSPI
-#0608000a 00000000 00000000 00000000
-#20000000 00407900 60040a00 21046000
-#00000000 00000000 00000000 00038000
-#20084800 881b7340 00000000 00000000
diff --git a/board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg b/board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
new file mode 100644
index 0000000000..205606f4d2
--- /dev/null
+++ b/board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
@@ -0,0 +1,8 @@
+#PBL preamble and RCW header
+aa55aa55 01ee0100
+
+#enable IFC, disable QSPI and DSPI
+0608000a 00000000 00000000 00000000
+30000000 00007900 60040a00 21046000
+00000000 00000000 00000000 20000000
+00080000 881b7340 00000000 00000000
diff --git a/board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg b/board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg
new file mode 100644
index 0000000000..6767e09388
--- /dev/null
+++ b/board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg
@@ -0,0 +1,8 @@
+#PBL preamble and RCW header
+aa55aa55 01ee0100
+
+#disable IFC, enable QSPI and DSPI
+0608000a 00000000 00000000 00000000
+30000000 00007900 60040a00 21046000
+00000000 00000000 00000000 20000000
+20024800 881b7340 00000000 00000000