Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxx

11 files changed, 0 insertions, 2074 deletions

diff --git a/board/tqc/tqm8260/Kconfig b/board/tqc/tqm8260/Kconfig
deleted file mode 100644
index 90a96ebebe..0000000000
--- a/board/tqc/tqm8260/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_TQM8260
-
-config SYS_BOARD
-	default "tqm8260"
-
-config SYS_VENDOR
-	default "tqc"
-
-config SYS_CONFIG_NAME
-	default "TQM8260"
-
-endif
diff --git a/board/tqc/tqm8260/MAINTAINERS b/board/tqc/tqm8260/MAINTAINERS
deleted file mode 100644
index 266910fe05..0000000000
--- a/board/tqc/tqm8260/MAINTAINERS
+++ /dev/null
@@ -1,16 +0,0 @@
-TQM8260 BOARD
-M:	Wolfgang Denk <wd@denx.de>
-S:	Maintained
-F:	board/tqc/tqm8260/
-F:	include/configs/TQM8260.h
-F:	configs/TQM8255_AA_defconfig
-F:	configs/TQM8260_AA_defconfig
-F:	configs/TQM8260_AB_defconfig
-F:	configs/TQM8260_AC_defconfig
-F:	configs/TQM8260_AD_defconfig
-F:	configs/TQM8260_AE_defconfig
-F:	configs/TQM8260_AF_defconfig
-F:	configs/TQM8260_AG_defconfig
-F:	configs/TQM8260_AH_defconfig
-F:	configs/TQM8260_AI_defconfig
-F:	configs/TQM8265_AA_defconfig
diff --git a/board/tqc/tqm8260/Makefile b/board/tqc/tqm8260/Makefile
deleted file mode 100644
index 6b8573d9ab..0000000000
--- a/board/tqc/tqm8260/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= tqm8260.o ../tqm8xx/load_sernum_ethaddr.o
diff --git a/board/tqc/tqm8260/README b/board/tqc/tqm8260/README
deleted file mode 100644
index 93b55068f5..0000000000
--- a/board/tqc/tqm8260/README
+++ /dev/null
@@ -1,415 +0,0 @@
-
-This file contains basic information on the port of U-Boot to TQM8260.
-All the changes fit in the common U-Boot infrastructure, providing a
-new TQM8260-specific entry in makefiles. To build U-Boot for TQM8260,
-type "make TQM8260_config", edit the "include/config_TQM8260.h" file
-if necessary, then type "make".
-
-
-Common file modifications:
---------------------------
-
-The following common files have been modified by this project:
-(starting from the ppcboot-0.9.3/ directory)
-
-MAKEALL			- TQM8260 entry added
-Makefile		- TQM8260_config entry added
-arch/powerpc/cpu/mpc8260/Makefile	- soft_i2c.o module added
-arch/powerpc/cpu/mpc8260/ether_scc.c	- TQM8260-specific definitions added, an obvious
-			  bug fixed (fcr -> scr)
-arch/powerpc/cpu/mpc8260/ether_fcc.c	- TQM8260-specific definitions added
-include/flash.h		- added definitions for the AM29LV640D Flash chip
-
-
-New files:
-----------
-
-The following new files have been added by this project:
-(starting from the ppcboot-0.9.3/ directory)
-
-board/tqm8260/		  - board-specific directory
-board/tqm8260/Makefile	  - board-specific makefile
-board/tqm8260/config.mk	  - config file
-board/tqm8260/flash.c	  - flash driver (for AM29LV640D)
-board/tqm8260/ppcboot.lds - linker script
-board/tqm8260/tqm8260.c	  - ioport and memory initialization
-arch/powerpc/cpu/mpc8260/soft_i2c.c	  - software i2c EEPROM driver
-include/config_TQM8260.h  - main configuration file
-
-
-New configuration options:
---------------------------
-
-CONFIG_TQM8260
-
-	Main board-specific option (should be defined for TQM8260).
-
-CONFIG_82xx_CONS_SMC1
-
-	If defined, SMC1 will be used as the console
-
-CONFIG_82xx_CONS_SMC2
-
-	If defined, SMC2 will be used as the console
-
-CONFIG_SYS_INIT_LOCAL_SDRAM
-
-	If defined, the SDRAM on the local bus will be initialized and
-	mapped at BR2.
-
-
-Acceptance criteria tests:
---------------------------
-
-The following tests have been conducted to validate the port of U-Boot
-to TQM8260:
-
-1. Operation on serial console:
-
-With the CONFIG_82xx_CONS_SMC1 option defined in the main configuration file,
-the U-Boot output appeared on the serial terminal connected to COM1 as
-follows:
-
-------------------------------------------------------------------------------
-=> help
-go      - start application at address 'addr'
-run     - run commands in an environment variable
-bootm   - boot application image from memory
-bootp   - boot image via network using BootP/TFTP protocol
-tftpboot- boot image via network using TFTP protocol
-	       and env variables ipaddr and serverip
-rarpboot- boot image via network using RARP/TFTP protocol
-bootd   - boot default, i.e., run 'bootcmd'
-loads   - load S-Record file over serial line
-loadb   - load binary file over serial line (kermit mode)
-md      - memory display
-mm      - memory modify (auto-incrementing)
-nm      - memory modify (constant address)
-mw      - memory write (fill)
-cp      - memory copy
-cmp     - memory compare
-crc32   - checksum calculation
-base    - print or set address offset
-printenv- print environment variables
-setenv  - set environment variables
-saveenv - save environment variables to persistent storage
-protect - enable or disable FLASH write protection
-erase   - erase FLASH memory
-flinfo  - print FLASH memory information
-bdinfo  - print Board Info structure
-iminfo  - print header information for application image
-coninfo - print console devices and informations
-eeprom  - EEPROM sub-system
-loop    - infinite loop on address range
-mtest   - simple RAM test
-icache  - enable or disable instruction cache
-dcache  - enable or disable data cache
-reset   - Perform RESET of the CPU
-echo    - echo args to console
-version - print monitor version
-help    - print online help
-?       - alias for 'help'
-=>
-------------------------------------------------------------------------------
-
-
-2. Flash driver operation
-
-The following sequence was performed to test the "flinfo" command:
-
-------------------------------------------------------------------------------
-=> flinfo
-
-Bank # 1: AMD 29LV640D (64 M, uniform sector)
-  Size: 32 MB in 128 Sectors
-  Sector Start Addresses:
-    40000000      40040000 (RO) 40080000      400C0000      40100000
-    40140000      40180000      401C0000      40200000      40240000
-    40280000      402C0000      40300000      40340000      40380000
-    403C0000      40400000      40440000      40480000      404C0000
-    40500000      40540000      40580000      405C0000      40600000
-    40640000      40680000      406C0000      40700000      40740000
-    40780000      407C0000      40800000      40840000      40880000
-    408C0000      40900000      40940000      40980000      409C0000
-    40A00000      40A40000      40A80000      40AC0000      40B00000
-    40B40000      40B80000      40BC0000      40C00000      40C40000
-    40C80000      40CC0000      40D00000      40D40000      40D80000
-    40DC0000      40E00000      40E40000      40E80000      40EC0000
-    40F00000      40F40000      40F80000      40FC0000      41000000
-    41040000      41080000      410C0000      41100000      41140000
-    41180000      411C0000      41200000      41240000      41280000
-    412C0000      41300000      41340000      41380000      413C0000
-    41400000      41440000      41480000      414C0000      41500000
-    41540000      41580000      415C0000      41600000      41640000
-    41680000      416C0000      41700000      41740000      41780000
-    417C0000      41800000      41840000      41880000      418C0000
-    41900000      41940000      41980000      419C0000      41A00000
-    41A40000      41A80000      41AC0000      41B00000      41B40000
-    41B80000      41BC0000      41C00000      41C40000      41C80000
-    41CC0000      41D00000      41D40000      41D80000      41DC0000
-    41E00000      41E40000      41E80000      41EC0000      41F00000
-    41F40000      41F80000      41FC0000
-=>
-------------------------------------------------------------------------------
-
-
-The following sequence was performed to test the erase command:
-
-------------------------------------------------------------------------------
-=> cp 0 40080000 10
-Copy to Flash... done
-=> erase 40080000 400bffff
-Erase Flash from 0x40080000 to 0x400bffff
-.. done
-Erased 1 sectors
-=> md 40080000
-40080000: ffffffff ffffffff ffffffff ffffffff    ................
-40080010: ffffffff ffffffff ffffffff ffffffff    ................
-40080020: ffffffff ffffffff ffffffff ffffffff    ................
-40080030: ffffffff ffffffff ffffffff ffffffff    ................
-40080040: ffffffff ffffffff ffffffff ffffffff    ................
-40080050: ffffffff ffffffff ffffffff ffffffff    ................
-40080060: ffffffff ffffffff ffffffff ffffffff    ................
-40080070: ffffffff ffffffff ffffffff ffffffff    ................
-40080080: ffffffff ffffffff ffffffff ffffffff    ................
-40080090: ffffffff ffffffff ffffffff ffffffff    ................
-400800a0: ffffffff ffffffff ffffffff ffffffff    ................
-400800b0: ffffffff ffffffff ffffffff ffffffff    ................
-400800c0: ffffffff ffffffff ffffffff ffffffff    ................
-400800d0: ffffffff ffffffff ffffffff ffffffff    ................
-400800e0: ffffffff ffffffff ffffffff ffffffff    ................
-400800f0: ffffffff ffffffff ffffffff ffffffff    ................
-=> cp 0 40080000 10
-Copy to Flash... done
-=> erase 1:2
-Erase Flash Sectors 2-2 in Bank # 1
-.. done
-=> md 40080000
-40080000: ffffffff ffffffff ffffffff ffffffff    ................
-40080010: ffffffff ffffffff ffffffff ffffffff    ................
-40080020: ffffffff ffffffff ffffffff ffffffff    ................
-40080030: ffffffff ffffffff ffffffff ffffffff    ................
-40080040: ffffffff ffffffff ffffffff ffffffff    ................
-40080050: ffffffff ffffffff ffffffff ffffffff    ................
-40080060: ffffffff ffffffff ffffffff ffffffff    ................
-40080070: ffffffff ffffffff ffffffff ffffffff    ................
-40080080: ffffffff ffffffff ffffffff ffffffff    ................
-40080090: ffffffff ffffffff ffffffff ffffffff    ................
-400800a0: ffffffff ffffffff ffffffff ffffffff    ................
-400800b0: ffffffff ffffffff ffffffff ffffffff    ................
-400800c0: ffffffff ffffffff ffffffff ffffffff    ................
-400800d0: ffffffff ffffffff ffffffff ffffffff    ................
-400800e0: ffffffff ffffffff ffffffff ffffffff    ................
-400800f0: ffffffff ffffffff ffffffff ffffffff    ................
-=> cp 0 40080000 10
-Copy to Flash... done
-=> cp 0 400c0000 10
-Copy to Flash... done
-=> erase 1:2-3
-Erase Flash Sectors 2-3 in Bank # 1
-... done
-=> md 40080000
-40080000: ffffffff ffffffff ffffffff ffffffff    ................
-40080010: ffffffff ffffffff ffffffff ffffffff    ................
-40080020: ffffffff ffffffff ffffffff ffffffff    ................
-40080030: ffffffff ffffffff ffffffff ffffffff    ................
-40080040: ffffffff ffffffff ffffffff ffffffff    ................
-40080050: ffffffff ffffffff ffffffff ffffffff    ................
-40080060: ffffffff ffffffff ffffffff ffffffff    ................
-40080070: ffffffff ffffffff ffffffff ffffffff    ................
-40080080: ffffffff ffffffff ffffffff ffffffff    ................
-40080090: ffffffff ffffffff ffffffff ffffffff    ................
-400800a0: ffffffff ffffffff ffffffff ffffffff    ................
-400800b0: ffffffff ffffffff ffffffff ffffffff    ................
-400800c0: ffffffff ffffffff ffffffff ffffffff    ................
-400800d0: ffffffff ffffffff ffffffff ffffffff    ................
-400800e0: ffffffff ffffffff ffffffff ffffffff    ................
-400800f0: ffffffff ffffffff ffffffff ffffffff    ................
-=> md 400c0000
-400c0000: ffffffff ffffffff ffffffff ffffffff    ................
-400c0010: ffffffff ffffffff ffffffff ffffffff    ................
-400c0020: ffffffff ffffffff ffffffff ffffffff    ................
-400c0030: ffffffff ffffffff ffffffff ffffffff    ................
-400c0040: ffffffff ffffffff ffffffff ffffffff    ................
-400c0050: ffffffff ffffffff ffffffff ffffffff    ................
-400c0060: ffffffff ffffffff ffffffff ffffffff    ................
-400c0070: ffffffff ffffffff ffffffff ffffffff    ................
-400c0080: ffffffff ffffffff ffffffff ffffffff    ................
-400c0090: ffffffff ffffffff ffffffff ffffffff    ................
-400c00a0: ffffffff ffffffff ffffffff ffffffff    ................
-400c00b0: ffffffff ffffffff ffffffff ffffffff    ................
-400c00c0: ffffffff ffffffff ffffffff ffffffff    ................
-400c00d0: ffffffff ffffffff ffffffff ffffffff    ................
-400c00e0: ffffffff ffffffff ffffffff ffffffff    ................
-400c00f0: ffffffff ffffffff ffffffff ffffffff    ................
-=>
-------------------------------------------------------------------------------
-
-
-The following sequence was performed to test the Flash programming commands:
-
-------------------------------------------------------------------------------
-=> erase 40080000 400bffff
-Erase Flash from 0x40080000 to 0x400bffff
-.. done
-Erased 1 sectors
-=> cp 0 40080000 10
-Copy to Flash... done
-=> md 0
-00000000: 00000000 00000104 61100200 01000000    ........a.......
-00000010: 00000000 00000000 81140000 82000100    ................
-00000020: 01080000 00004000 22800000 00000600    ......@.".......
-00000030: 00200800 00000000 10000100 00008000    . ..............
-00000040: 00812000 00000200 00020000 80000000    .. .............
-00000050: 00028001 00001000 00040400 00000200    ................
-00000060: 20480000 00000000 20090000 00142000     H...... ..... .
-00000070: 00000000 00004000 24210000 10000000    ......@.$!......
-00000080: 02440002 10000000 00200008 00000000    .D....... ......
-00000090: 02440900 00000000 30a40000 00004400    .D......0.....D.
-000000a0: 04420800 00000000 00000040 00020000    .B.........@....
-000000b0: 05020000 00100000 00060000 00000000    ................
-000000c0: 00400000 00000000 00080000 00040000    .@..............
-000000d0: 10400000 00800004 00000000 00000200    .@..............
-000000e0: 80890000 00010004 00080000 00000020    ...............
-000000f0: 08000000 10000000 00010000 00000000    ................
-=> md 40080000
-40080000: 00000000 00000104 61100200 01000000    ........a.......
-40080010: 00000000 00000000 81140000 82000100    ................
-40080020: 01080000 00004000 22800000 00000600    ......@.".......
-40080030: 00200800 00000000 10000100 00008000    . ..............
-40080040: ffffffff ffffffff ffffffff ffffffff    ................
-40080050: ffffffff ffffffff ffffffff ffffffff    ................
-40080060: ffffffff ffffffff ffffffff ffffffff    ................
-40080070: ffffffff ffffffff ffffffff ffffffff    ................
-40080080: ffffffff ffffffff ffffffff ffffffff    ................
-40080090: ffffffff ffffffff ffffffff ffffffff    ................
-400800a0: ffffffff ffffffff ffffffff ffffffff    ................
-400800b0: ffffffff ffffffff ffffffff ffffffff    ................
-400800c0: ffffffff ffffffff ffffffff ffffffff    ................
-400800d0: ffffffff ffffffff ffffffff ffffffff    ................
-400800e0: ffffffff ffffffff ffffffff ffffffff    ................
-400800f0: ffffffff ffffffff ffffffff ffffffff    ................
-=>
-------------------------------------------------------------------------------
-
-
-The following sequence was performed to test storage of the environment
-variables in Flash:
-
-------------------------------------------------------------------------------
-=> setenv foo bar
-=> saveenv
-Un-Protected 1 sectors
-Erasing Flash...
-.. done
-Erased 1 sectors
-Saving Environment to Flash...
-Protected 1 sectors
-=> reset
-...
-=> printenv
-bootdelay=CONFIG_BOOTDELAY
-baudrate=9600
-ipaddr=192.168.4.7
-serverip=192.168.4.1
-ethaddr=66:55:44:33:22:11
-foo=bar
-stdin=serial
-stdout=serial
-stderr=serial
-
-Environment size: 170/262140 bytes
-=>
-------------------------------------------------------------------------------
-
-
-The following sequence was performed to test image download and run over
-Ethernet interface (both interfaces were tested):
-
-------------------------------------------------------------------------------
-=> tftpboot 40000 hello_world.bin
-ARP broadcast 1
-TFTP from server 192.168.2.2; our IP address is 192.168.2.7
-Filename 'hello_world.bin'.
-Load address: 0x40000
-Loading: #############
-done
-Bytes transferred = 65912 (10178 hex)
-=> go 40004
-## Starting application at 0x00040004 ...
-Hello World
-argc = 1
-argv[0] = "40004"
-argv[1] = "<NULL>"
-Hit any key to exit ...
-
-## Application terminated, rc = 0x0
-=>
-------------------------------------------------------------------------------
-
-
-The following sequence was performed to test eeprom read/write commands:
-
-------------------------------------------------------------------------------
-=> md 40000
-00040000: 00018148 9421ffe0 7c0802a6 bf61000c    ...H.!..|....a..
-00040010: 90010024 48000005 7fc802a6 801effe8    ...$H...........
-00040020: 7fc0f214 7c7f1b78 813f004c 7c9c2378    ....|..x.?.L|.#x
-00040030: 807e8000 7cbd2b78 80090010 3b600000    .~..|.+x....;`..
-00040040: 7c0803a6 4e800021 813f004c 7f84e378    |...N..!.?.L...x
-00040050: 807e8004 80090010 7c0803a6 4e800021    .~......|...N..!
-00040060: 7c1be000 4181003c 80bd0000 813f004c    |...A..<.....?.L
-00040070: 3bbd0004 2c050000 40820008 80be8008    ;...,...@.......
-00040080: 80090010 7f64db78 807e800c 3b7b0001    .....d.x.~..;{..
-00040090: 7c0803a6 4e800021 7c1be000 4081ffcc    |...N..!|...@...
-000400a0: 813f004c 807e8010 80090010 7c0803a6    .?.L.~......|...
-000400b0: 4e800021 813f004c 80090004 7c0803a6    N..!.?.L....|...
-000400c0: 4e800021 2c030000 4182ffec 813f004c    N..!,...A....?.L
-000400d0: 80090000 7c0803a6 4e800021 813f004c    ....|...N..!.?.L
-000400e0: 807e8014 80090010 7c0803a6 4e800021    .~......|...N..!
-000400f0: 38600000 80010024 7c0803a6 bb61000c    8`.....$|....a..
-=> eeprom write 40000 0 40
-
-EEPROM write: addr 00040000  off 0000  count 64 ... done
-=> mw 50000 0 1000
-=> eeprom read 50000 0 40
-
-EEPROM read: addr 00050000  off 0000  count 64 ... done
-=> md 50000
-00050000: 00018148 9421ffe0 7c0802a6 bf61000c    ...H.!..|....a..
-00050010: 90010024 48000005 7fc802a6 801effe8    ...$H...........
-00050020: 7fc0f214 7c7f1b78 813f004c 7c9c2378    ....|..x.?.L|.#x
-00050030: 807e8000 7cbd2b78 80090010 3b600000    .~..|.+x....;`..
-00050040: 00000000 00000000 00000000 00000000    ................
-00050050: 00000000 00000000 00000000 00000000    ................
-00050060: 00000000 00000000 00000000 00000000    ................
-00050070: 00000000 00000000 00000000 00000000    ................
-00050080: 00000000 00000000 00000000 00000000    ................
-00050090: 00000000 00000000 00000000 00000000    ................
-000500a0: 00000000 00000000 00000000 00000000    ................
-000500b0: 00000000 00000000 00000000 00000000    ................
-000500c0: 00000000 00000000 00000000 00000000    ................
-000500d0: 00000000 00000000 00000000 00000000    ................
-000500e0: 00000000 00000000 00000000 00000000    ................
-000500f0: 00000000 00000000 00000000 00000000    ................
-=>
-------------------------------------------------------------------------------
-
-
-Patch per Mon, 06 Aug 2001 17:57:27:
-
-- upgraded Flash support (added support for the following chips:
-  AM29LV800T/B, AM29LV160T/B, AM29DL322T/B, AM29DL323T/B)
-- BCR tweakage for the 8260 bus mode
-- SIUMCR tweakage enabling the MI interrupt (IRQ7)
-
-To simplify switching between the bus modes, a new configuration
-option (CONFIG_BUSMODE_60x) has been added to the "config_TQM8260.h"
-file. If it is defined, BCR will be configured for the 60x mode,
-otherwise - for the 8260 mode.
-
-Concerning the SIUMCR modification: it's hard to predict whether it
-will induce any problems on the other (60x mode) board. However, the
-problems (if they appear) should be easy to notice - if the board
-does not boot, it's most likely caused by the DPPC configuration in
-SIUMCR.
diff --git a/board/tqc/tqm8260/tqm8260.c b/board/tqc/tqm8260/tqm8260.c
deleted file mode 100644
index c361f188f7..0000000000
--- a/board/tqc/tqm8260/tqm8260.c
+++ /dev/null
@@ -1,352 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <ioports.h>
-#include <mpc8260.h>
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
-    /* Port A configuration */
-    {	/*	      conf ppar psor pdir podr pdat */
-	/* PA31 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 *ATMTXEN */
-	/* PA30 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMTCA   */
-	/* PA29 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMTSOC  */
-	/* PA28 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 *ATMRXEN */
-	/* PA27 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMRSOC */
-	/* PA26 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMRCA */
-	/* PA25 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMTXD[0] */
-	/* PA24 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMTXD[1] */
-	/* PA23 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMTXD[2] */
-	/* PA22 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMTXD[3] */
-	/* PA21 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMTXD[4] */
-	/* PA20 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMTXD[5] */
-	/* PA19 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMTXD[6] */
-	/* PA18 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMTXD[7] */
-	/* PA17 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMRXD[7] */
-	/* PA16 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMRXD[6] */
-	/* PA15 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMRXD[5] */
-	/* PA14 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMRXD[4] */
-	/* PA13 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMRXD[3] */
-	/* PA12 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMRXD[2] */
-	/* PA11 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMRXD[1] */
-	/* PA10 */ {   0,   0,   0,   1,   0,   0   }, /* FCC1 ATMRXD[0] */
-	/* PA9  */ {   1,   1,   0,   1,   0,   0   }, /* SMC2 TXD */
-	/* PA8  */ {   1,   1,   0,   0,   0,   0   }, /* SMC2 RXD */
-	/* PA7  */ {   0,   0,   0,   1,   0,   0   }, /* PA7 */
-	/* PA6  */ {   0,   0,   0,   1,   0,   0   }, /* PA6 */
-	/* PA5  */ {   0,   0,   0,   1,   0,   0   }, /* PA5 */
-	/* PA4  */ {   0,   0,   0,   1,   0,   0   }, /* PA4 */
-	/* PA3  */ {   0,   0,   0,   1,   0,   0   }, /* PA3 */
-	/* PA2  */ {   0,   0,   0,   1,   0,   0   }, /* PA2 */
-	/* PA1  */ {   0,   0,   0,   1,   0,   0   }, /* PA1 */
-	/* PA0  */ {   0,   0,   0,   1,   0,   0   }  /* PA0 */
-    },
-
-    /* Port B configuration */
-    {   /*	      conf ppar psor pdir podr pdat */
-	/* PB31 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TX_ER */
-	/* PB30 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_DV */
-	/* PB29 */ {   1,   1,   1,   1,   0,   0   }, /* FCC2 MII TX_EN */
-	/* PB28 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_ER */
-	/* PB27 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII COL */
-	/* PB26 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII CRS */
-	/* PB25 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[3] */
-	/* PB24 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[2] */
-	/* PB23 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[1] */
-	/* PB22 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[0] */
-	/* PB21 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[0] */
-	/* PB20 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[1] */
-	/* PB19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[2] */
-	/* PB18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[3] */
-	/* PB17 */ {   0,   0,   0,   0,   0,   0   }, /* PB17 */
-	/* PB16 */ {   0,   0,   0,   0,   0,   0   }, /* PB16 */
-	/* PB15 */ {   0,   0,   0,   0,   0,   0   }, /* PB15 */
-	/* PB14 */ {   0,   0,   0,   0,   0,   0   }, /* PB14 */
-	/* PB13 */ {   0,   0,   0,   0,   0,   0   }, /* PB13 */
-	/* PB12 */ {   0,   0,   0,   0,   0,   0   }, /* PB12 */
-	/* PB11 */ {   0,   0,   0,   0,   0,   0   }, /* PB11 */
-	/* PB10 */ {   0,   0,   0,   0,   0,   0   }, /* PB10 */
-	/* PB9  */ {   0,   0,   0,   0,   0,   0   }, /* PB9 */
-	/* PB8  */ {   0,   0,   0,   0,   0,   0   }, /* PB8 */
-	/* PB7  */ {   0,   0,   0,   0,   0,   0   }, /* PB7 */
-	/* PB6  */ {   0,   0,   0,   0,   0,   0   }, /* PB6 */
-	/* PB5  */ {   0,   0,   0,   0,   0,   0   }, /* PB5 */
-	/* PB4  */ {   0,   0,   0,   0,   0,   0   }, /* PB4 */
-	/* PB3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    },
-
-    /* Port C */
-    {   /*	      conf ppar psor pdir podr pdat */
-	/* PC31 */ {   0,   0,   0,   1,   0,   0   }, /* PC31 */
-	/* PC30 */ {   0,   0,   0,   1,   0,   0   }, /* PC30 */
-	/* PC29 */ {   1,   1,   1,   0,   0,   0   }, /* SCC1 EN *CLSN */
-	/* PC28 */ {   0,   0,   0,   1,   0,   0   }, /* PC28 */
-	/* PC27 */ {   0,   0,   0,   1,   0,   0   }, /* PC27 */
-	/* PC26 */ {   0,   0,   0,   1,   0,   0   }, /* PC26 */
-	/* PC25 */ {   0,   0,   0,   1,   0,   0   }, /* PC25 */
-	/* PC24 */ {   0,   0,   0,   1,   0,   0   }, /* PC24 */
-	/* PC23 */ {   0,   1,   0,   1,   0,   0   }, /* ATMTFCLK */
-	/* PC22 */ {   0,   1,   0,   0,   0,   0   }, /* ATMRFCLK */
-	/* PC21 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN RXCLK */
-	/* PC20 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN TXCLK */
-	/* PC19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_CLK */
-	/* PC18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII TX_CLK */
-	/* PC17 */ {   0,   0,   0,   1,   0,   0   }, /* PC17 */
-	/* PC16 */ {   0,   0,   0,   1,   0,   0   }, /* PC16 */
-	/* PC15 */ {   0,   0,   0,   1,   0,   0   }, /* PC15 */
-	/* PC14 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN *CD */
-	/* PC13 */ {   0,   0,   0,   1,   0,   0   }, /* PC13 */
-	/* PC12 */ {   0,   0,   0,   1,   0,   0   }, /* PC12 */
-	/* PC11 */ {   0,   0,   0,   1,   0,   0   }, /* PC11 */
-	/* PC10 */ {   0,   0,   0,   1,   0,   0   }, /* FCC2 MDC */
-	/* PC9  */ {   0,   0,   0,   1,   0,   0   }, /* FCC2 MDIO */
-	/* PC8  */ {   0,   0,   0,   1,   0,   0   }, /* PC8 */
-	/* PC7  */ {   0,   0,   0,   1,   0,   0   }, /* PC7 */
-	/* PC6  */ {   0,   0,   0,   1,   0,   0   }, /* PC6 */
-	/* PC5  */ {   0,   0,   0,   1,   0,   0   }, /* PC5 */
-	/* PC4  */ {   0,   0,   0,   1,   0,   0   }, /* PC4 */
-	/* PC3  */ {   0,   0,   0,   1,   0,   0   }, /* PC3 */
-	/* PC2  */ {   0,   0,   0,   1,   0,   1   }, /* ENET FDE */
-	/* PC1  */ {   0,   0,   0,   1,   0,   0   }, /* ENET DSQE */
-	/* PC0  */ {   0,   0,   0,   1,   0,   0   }, /* ENET LBK */
-    },
-
-    /* Port D */
-    {   /*	      conf ppar psor pdir podr pdat */
-	/* PD31 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN RxD */
-	/* PD30 */ {   1,   1,   1,   1,   0,   0   }, /* SCC1 EN TxD */
-	/* PD29 */ {   1,   1,   0,   1,   0,   0   }, /* SCC1 EN TENA */
-	/* PD28 */ {   0,   0,   0,   1,   0,   0   }, /* PD28 */
-	/* PD27 */ {   0,   0,   0,   1,   0,   0   }, /* PD27 */
-	/* PD26 */ {   0,   0,   0,   1,   0,   0   }, /* PD26 */
-	/* PD25 */ {   0,   0,   0,   1,   0,   0   }, /* PD25 */
-	/* PD24 */ {   0,   0,   0,   1,   0,   0   }, /* PD24 */
-	/* PD23 */ {   0,   0,   0,   1,   0,   0   }, /* PD23 */
-	/* PD22 */ {   0,   0,   0,   1,   0,   0   }, /* PD22 */
-	/* PD21 */ {   0,   0,   0,   1,   0,   0   }, /* PD21 */
-	/* PD20 */ {   0,   0,   0,   1,   0,   0   }, /* PD20 */
-	/* PD19 */ {   0,   0,   0,   1,   0,   0   }, /* PD19 */
-	/* PD18 */ {   0,   0,   0,   1,   0,   0   }, /* PD19 */
-	/* PD17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXPRTY */
-	/* PD16 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXPRTY */
-#if defined(CONFIG_SYS_I2C_SOFT)
-	/* PD15 */ {   1,   0,   0,   1,   1,   1   }, /* I2C SDA */
-	/* PD14 */ {   1,   0,   0,   1,   1,   1   }, /* I2C SCL */
-#else
-#if defined(CONFIG_HARD_I2C)
-	/* PD15 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SDA */
-	/* PD14 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SCL */
-#else /* normal I/O port pins */
-	/* PD15 */ {   0,   1,   1,   0,   1,   0   }, /* I2C SDA */
-	/* PD14 */ {   0,   1,   1,   0,   1,   0   }, /* I2C SCL */
-#endif
-#endif
-	/* PD13 */ {   0,   0,   0,   0,   0,   0   }, /* PD13 */
-	/* PD12 */ {   0,   0,   0,   0,   0,   0   }, /* PD12 */
-	/* PD11 */ {   0,   0,   0,   0,   0,   0   }, /* PD11 */
-	/* PD10 */ {   0,   0,   0,   0,   0,   0   }, /* PD10 */
-	/* PD9  */ {   1,   1,   0,   1,   0,   0   }, /* SMC1 TXD */
-	/* PD8  */ {   1,   1,   0,   0,   0,   0   }, /* SMC1 RXD */
-	/* PD7  */ {   0,   0,   0,   1,   0,   1   }, /* PD7 */
-	/* PD6  */ {   0,   0,   0,   1,   0,   1   }, /* PD6 */
-	/* PD5  */ {   0,   0,   0,   1,   0,   1   }, /* PD5 */
-	/* PD4  */ {   0,   0,   0,   1,   0,   1   }, /* PD4 */
-	/* PD3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    }
-};
-
-/* ------------------------------------------------------------------------- */
-
-/* Check Board Identity:
- */
-int checkboard (void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-
-	puts ("Board: ");
-
-	if (i < 0 || strncmp(buf, "TQM82", 5)) {
-		puts ("### No HW ID - assuming TQM8260\n");
-		return (0);
-	}
-
-	puts (buf);
-	putc ('\n');
-
-	return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
- *
- * This routine performs standard 8260 initialization sequence
- * and calculates the available memory size. It may be called
- * several times to try different SDRAM configurations on both
- * 60x and local buses.
- */
-static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
-						  ulong orx, volatile uchar * base)
-{
-	volatile uchar c = 0xff;
-	volatile uint *sdmr_ptr;
-	volatile uint *orx_ptr;
-	ulong maxsize, size;
-	int i;
-
-	/* We must be able to test a location outsize the maximum legal size
-	 * to find out THAT we are outside; but this address still has to be
-	 * mapped by the controller. That means, that the initial mapping has
-	 * to be (at least) twice as large as the maximum expected size.
-	 */
-	maxsize = (1 + (~orx | 0x7fff)) / 2;
-
-	/* Since CONFIG_SYS_SDRAM_BASE is always 0 (??), we assume that
-	 * we are configuring CS1 if base != 0
-	 */
-	sdmr_ptr = base ? &memctl->memc_lsdmr : &memctl->memc_psdmr;
-	orx_ptr = base ? &memctl->memc_or2 : &memctl->memc_or1;
-
-	*orx_ptr = orx;
-
-	/*
-	 * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
-	 *
-	 * "At system reset, initialization software must set up the
-	 *  programmable parameters in the memory controller banks registers
-	 *  (ORx, BRx, P/LSDMR). After all memory parameters are configured,
-	 *  system software should execute the following initialization sequence
-	 *  for each SDRAM device.
-	 *
-	 *  1. Issue a PRECHARGE-ALL-BANKS command
-	 *  2. Issue eight CBR REFRESH commands
-	 *  3. Issue a MODE-SET command to initialize the mode register
-	 *
-	 *  The initial commands are executed by setting P/LSDMR[OP] and
-	 *  accessing the SDRAM with a single-byte transaction."
-	 *
-	 * The appropriate BRx/ORx registers have already been set when we
-	 * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
-	 */
-
-	*sdmr_ptr = sdmr | PSDMR_OP_PREA;
-	*base = c;
-
-	*sdmr_ptr = sdmr | PSDMR_OP_CBRR;
-	for (i = 0; i < 8; i++)
-		*base = c;
-
-	*sdmr_ptr = sdmr | PSDMR_OP_MRW;
-	*(base + CONFIG_SYS_MRS_OFFS) = c;	/* setting MR on address lines */
-
-	*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
-	*base = c;
-
-	size = get_ram_size((long *)base, maxsize);
-	*orx_ptr = orx | ~(size - 1);
-
-	return (size);
-}
-
-phys_size_t initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8260_t *memctl = &immap->im_memctl;
-
-#ifndef CONFIG_SYS_RAMBOOT
-	long size8, size9;
-#endif
-	long psize, lsize;
-
-	psize = 16 * 1024 * 1024;
-	lsize = 0;
-
-	memctl->memc_psrt = CONFIG_SYS_PSRT;
-	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-
-#if 0							/* Just for debugging */
-#define	prt_br_or(brX,orX) do {				\
-    ulong start =  memctl->memc_ ## brX & 0xFFFF8000;	\
-    ulong sizem = ~memctl->memc_ ## orX | 0x00007FFF;	\
-    printf ("\n"					\
-	    #brX " 0x%08x  " #orX " 0x%08x "		\
-	    "==> 0x%08lx ... 0x%08lx = %ld MB\n",	\
-	memctl->memc_ ## brX, memctl->memc_ ## orX,	\
-	start, start+sizem, (sizem+1)>>20);		\
-    } while (0)
-	prt_br_or (br0, or0);
-	prt_br_or (br1, or1);
-	prt_br_or (br2, or2);
-	prt_br_or (br3, or3);
-#endif
-
-#ifndef CONFIG_SYS_RAMBOOT
-	/* 60x SDRAM setup:
-	 */
-	size8 = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL,
-					  (uchar *) CONFIG_SYS_SDRAM_BASE);
-	size9 = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR1_9COL,
-					  (uchar *) CONFIG_SYS_SDRAM_BASE);
-
-	if (size8 < size9) {
-		psize = size9;
-		printf ("(60x:9COL - %ld MB, ", psize >> 20);
-	} else {
-		psize = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL,
-						  (uchar *) CONFIG_SYS_SDRAM_BASE);
-		printf ("(60x:8COL - %ld MB, ", psize >> 20);
-	}
-
-	/* Local SDRAM setup:
-	 */
-#ifdef CONFIG_SYS_INIT_LOCAL_SDRAM
-	memctl->memc_lsrt = CONFIG_SYS_LSRT;
-	size8 = try_init (memctl, CONFIG_SYS_LSDMR_8COL, CONFIG_SYS_OR2_8COL,
-					  (uchar *) SDRAM_BASE2_PRELIM);
-	size9 = try_init (memctl, CONFIG_SYS_LSDMR_9COL, CONFIG_SYS_OR2_9COL,
-					  (uchar *) SDRAM_BASE2_PRELIM);
-
-	if (size8 < size9) {
-		lsize = size9;
-		printf ("Local:9COL - %ld MB) using ", lsize >> 20);
-	} else {
-		lsize = try_init (memctl, CONFIG_SYS_LSDMR_8COL, CONFIG_SYS_OR2_8COL,
-						  (uchar *) SDRAM_BASE2_PRELIM);
-		printf ("Local:8COL - %ld MB) using ", lsize >> 20);
-	}
-
-#if 0
-	/* Set up BR2 so that the local SDRAM goes
-	 * right after the 60x SDRAM
-	 */
-	memctl->memc_br2 = (CONFIG_SYS_BR2_PRELIM & ~BRx_BA_MSK) |
-			(CONFIG_SYS_SDRAM_BASE + psize);
-#endif
-#endif /* CONFIG_SYS_INIT_LOCAL_SDRAM */
-#endif /* CONFIG_SYS_RAMBOOT */
-
-	icache_enable ();
-
-	return (psize);
-}
-
-/* ------------------------------------------------------------------------- */
diff --git a/board/tqc/tqm8272/Kconfig b/board/tqc/tqm8272/Kconfig
deleted file mode 100644
index 7b5cd8bc7c..0000000000
--- a/board/tqc/tqm8272/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_TQM8272
-
-config SYS_BOARD
-	default "tqm8272"
-
-config SYS_VENDOR
-	default "tqc"
-
-config SYS_CONFIG_NAME
-	default "TQM8272"
-
-endif
diff --git a/board/tqc/tqm8272/MAINTAINERS b/board/tqc/tqm8272/MAINTAINERS
deleted file mode 100644
index 988d2b189b..0000000000
--- a/board/tqc/tqm8272/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-TQM8272 BOARD
-#M:	-
-S:	Maintained
-F:	board/tqc/tqm8272/
-F:	include/configs/TQM8272.h
-F:	configs/TQM8272_defconfig
diff --git a/board/tqc/tqm8272/Makefile b/board/tqc/tqm8272/Makefile
deleted file mode 100644
index 8bf02414e3..0000000000
--- a/board/tqc/tqm8272/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2001-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= tqm8272.o ../tqm8xx/load_sernum_ethaddr.o nand.o
diff --git a/board/tqc/tqm8272/nand.c b/board/tqc/tqm8272/nand.c
deleted file mode 100644
index 7fb2dfabc1..0000000000
--- a/board/tqc/tqm8272/nand.c
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- * (C) Copyright 2008
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <ioports.h>
-#include <mpc8260.h>
-
-#include "tqm8272.h"
-
-/* UPM pattern for bus clock = 66.7 MHz */
-static const uint upmTable67[] =
-{
-    /* Offset	UPM Read Single RAM array entry -> NAND Read Data */
-    /* 0x00 */	0x0fa3f100, 0x0fa3b000, 0x0fa33100, 0x0fa33000,
-    /* 0x04 */	0x0fa33000, 0x0fa33004, 0xfffffc01, 0xfffffc00,
-
-		/* UPM Read Burst RAM array entry -> unused */
-    /* 0x08 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x0C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
-		/* UPM Read Burst RAM array entry -> unused */
-    /* 0x10 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x14 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
-		/* UPM Write Single RAM array entry -> NAND Write Data, ADDR and CMD */
-    /* 0x18 */	0x00a3fc00, 0x00a3fc00, 0x00a3fc00, 0x00a3fc00,
-    /* 0x1C */	0x0fa3fc00, 0x0fa3fc04, 0xfffffc01, 0xfffffc00,
-
-		/* UPM Write Burst RAM array entry -> unused */
-    /* 0x20 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x24 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x28 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x2C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
-		/* UPM Refresh Timer RAM array entry -> unused */
-    /* 0x30 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x34 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x38 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
-		/* UPM Exception RAM array entry -> unsused */
-    /* 0x3C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-/* UPM pattern for bus clock = 100 MHz */
-static const uint upmTable100[] =
-{
-    /* Offset	UPM Read Single RAM array entry -> NAND Read Data */
-    /* 0x00 */	0x0fa3f200, 0x0fa3b000, 0x0fa33300, 0x0fa33000,
-    /* 0x04 */	0x0fa33000, 0x0fa33004, 0xfffffc01, 0xfffffc00,
-
-		/* UPM Read Burst RAM array entry -> unused */
-    /* 0x08 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x0C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
-		/* UPM Read Burst RAM array entry -> unused */
-    /* 0x10 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x14 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
-		/* UPM Write Single RAM array entry -> NAND Write Data, ADDR and CMD */
-    /* 0x18 */	0x00a3ff00, 0x00a3fc00, 0x00a3fc00, 0x0fa3fc00,
-    /* 0x1C */	0x0fa3fc00, 0x0fa3fc04, 0xfffffc01, 0xfffffc00,
-
-		/* UPM Write Burst RAM array entry -> unused */
-    /* 0x20 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x24 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x28 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x2C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
-		/* UPM Refresh Timer RAM array entry -> unused */
-    /* 0x30 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x34 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x38 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
-		/* UPM Exception RAM array entry -> unsused */
-    /* 0x3C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-/* UPM pattern for bus clock = 133.3 MHz */
-static const uint upmTable133[] =
-{
-    /* Offset	UPM Read Single RAM array entry -> NAND Read Data */
-    /* 0x00 */	0x0fa3f300, 0x0fa3b000, 0x0fa33300, 0x0fa33000,
-    /* 0x04 */	0x0fa33200, 0x0fa33004, 0xfffffc01, 0xfffffc00,
-
-		/* UPM Read Burst RAM array entry -> unused */
-    /* 0x08 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x0C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
-		/* UPM Read Burst RAM array entry -> unused */
-    /* 0x10 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x14 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
-		/* UPM Write Single RAM array entry -> NAND Write Data, ADDR and CMD */
-    /* 0x18 */	0x00a3ff00, 0x00a3fc00, 0x00a3fd00, 0x0fa3fc00,
-    /* 0x1C */	0x0fa3fd00, 0x0fa3fc04, 0xfffffc01, 0xfffffc00,
-
-		/* UPM Write Burst RAM array entry -> unused */
-    /* 0x20 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x24 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x28 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x2C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
-		/* UPM Refresh Timer RAM array entry -> unused */
-    /* 0x30 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x34 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x38 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
-		/* UPM Exception RAM array entry -> unsused */
-    /* 0x3C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-static int	chipsel = 0;
-
-#if defined(CONFIG_CMD_NAND)
-
-#include <nand.h>
-#include <linux/mtd/mtd.h>
-
-static u8 hwctl = 0;
-
-static void upmnand_write_byte(struct mtd_info *mtdinfo, u_char byte)
-{
-	struct nand_chip *this = mtdinfo->priv;
-	ulong base = (ulong) (this->IO_ADDR_W + chipsel * CONFIG_SYS_NAND_CS_DIST);
-
-	if (hwctl & 0x1) {
-		WRITE_NAND_UPM(byte, base, CONFIG_SYS_NAND_UPM_WRITE_CMD_OFS);
-	} else if (hwctl & 0x2) {
-		WRITE_NAND_UPM(byte, base, CONFIG_SYS_NAND_UPM_WRITE_ADDR_OFS);
-	} else {
-		WRITE_NAND(byte, base);
-	}
-}
-
-static void upmnand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
-	if (ctrl & NAND_CTRL_CHANGE) {
-		if ( ctrl & NAND_CLE )
-			hwctl |= 0x1;
-		else
-			hwctl &= ~0x1;
-		if ( ctrl & NAND_ALE )
-			hwctl |= 0x2;
-		else
-			hwctl &= ~0x2;
-	}
-	if (cmd != NAND_CMD_NONE)
-		upmnand_write_byte (mtd, cmd);
-}
-
-static u_char upmnand_read_byte(struct mtd_info *mtdinfo)
-{
-	struct nand_chip *this = mtdinfo->priv;
-	ulong base = (ulong) (this->IO_ADDR_W + chipsel * CONFIG_SYS_NAND_CS_DIST);
-
-	return READ_NAND(base);
-}
-
-static int tqm8272_dev_ready(struct mtd_info *mtdinfo)
-{
-	/* constant delay (see also tR in the datasheet) */
-	udelay(12); \
-	return 1;
-}
-
-#ifndef CONFIG_NAND_SPL
-static void tqm8272_read_buf(struct mtd_info *mtdinfo, uint8_t *buf, int len)
-{
-	struct nand_chip *this = mtdinfo->priv;
-	unsigned char *base = (unsigned char *) (this->IO_ADDR_W + chipsel * CONFIG_SYS_NAND_CS_DIST);
-	int	i;
-
-	for (i = 0; i< len; i++)
-		buf[i] = *base;
-}
-
-static void tqm8272_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
-{
-	struct nand_chip *this = mtdinfo->priv;
-	unsigned char *base = (unsigned char *) (this->IO_ADDR_W + chipsel * CONFIG_SYS_NAND_CS_DIST);
-	int	i;
-
-	for (i = 0; i< len; i++)
-		*base = buf[i];
-}
-
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-static int tqm8272_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
-{
-	struct nand_chip *this = mtdinfo->priv;
-	unsigned char *base = (unsigned char *) (this->IO_ADDR_W + chipsel * CONFIG_SYS_NAND_CS_DIST);
-	int	i;
-
-	for (i = 0; i < len; i++)
-		if (buf[i] != *base)
-			return -1;
-	return 0;
-}
-#endif
-#endif /* #ifndef CONFIG_NAND_SPL */
-
-void board_nand_select_device(struct nand_chip *nand, int chip)
-{
-	chipsel = chip;
-}
-
-int board_nand_init(struct nand_chip *nand)
-{
-	static	int	UpmInit = 0;
-	volatile immap_t * immr = (immap_t *)CONFIG_SYS_IMMR;
-	volatile memctl8260_t *memctl = &immr->im_memctl;
-
-	if (hwinf.nand == 0) return -1;
-
-	/* Setup the UPM */
-	if (UpmInit == 0) {
-		switch (hwinf.busclk_real) {
-		case 100000000:
-			upmconfig (UPMB, (uint *) upmTable100,
-			   sizeof (upmTable100) / sizeof (uint));
-			break;
-		case 133333333:
-			upmconfig (UPMB, (uint *) upmTable133,
-			   sizeof (upmTable133) / sizeof (uint));
-			break;
-		default:
-			upmconfig (UPMB, (uint *) upmTable67,
-			   sizeof (upmTable67) / sizeof (uint));
-			break;
-		}
-		UpmInit = 1;
-	}
-
-	/* Setup the memctrl */
-	memctl->memc_or3 = CONFIG_SYS_NAND_OR;
-	memctl->memc_br3 = CONFIG_SYS_NAND_BR;
-	memctl->memc_mbmr = (MxMR_OP_NORM);
-
-	nand->ecc.mode = NAND_ECC_SOFT;
-
-	nand->cmd_ctrl	 = upmnand_hwcontrol;
-	nand->read_byte	 = upmnand_read_byte;
-	nand->dev_ready	 = tqm8272_dev_ready;
-
-#ifndef CONFIG_NAND_SPL
-	nand->write_buf	 = tqm8272_write_buf;
-	nand->read_buf	 = tqm8272_read_buf;
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-	nand->verify_buf = tqm8272_verify_buf;
-#endif
-#endif
-
-	/*
-	 * Select required NAND chip
-	 */
-	board_nand_select_device(nand, 0);
-	return 0;
-}
-
-#endif
diff --git a/board/tqc/tqm8272/tqm8272.c b/board/tqc/tqm8272/tqm8272.c
deleted file mode 100644
index d6508681e9..0000000000
--- a/board/tqc/tqm8272/tqm8272.c
+++ /dev/null
@@ -1,944 +0,0 @@
-/*
- * (C) Copyright 2006
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <ioports.h>
-#include <mpc8260.h>
-
-#include <command.h>
-#include <netdev.h>
-#ifdef CONFIG_PCI
-#include <pci.h>
-#include <asm/m8260_pci.h>
-#endif
-#include "tqm8272.h"
-
-#if 0
-#define deb_printf(fmt,arg...) \
-	printf ("TQM8272 %s %s: " fmt,__FILE__, __FUNCTION__, ##arg)
-#else
-#define deb_printf(fmt,arg...) \
-	do { } while (0)
-#endif
-
-#if defined(CONFIG_BOARD_GET_CPU_CLK_F)
-unsigned long board_get_cpu_clk_f (void);
-#endif
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
-    /* Port A configuration */
-    {	/*	      conf ppar psor pdir podr pdat */
-	/* PA31 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 *ATMTXEN */
-	/* PA30 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMTCA	*/
-	/* PA29 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMTSOC	*/
-	/* PA28 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 *ATMRXEN */
-	/* PA27 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMRSOC */
-	/* PA26 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMRCA */
-	/* PA25 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMTXD[0] */
-	/* PA24 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMTXD[1] */
-	/* PA23 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMTXD[2] */
-	/* PA22 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMTXD[3] */
-	/* PA21 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMTXD[4] */
-	/* PA20 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMTXD[5] */
-	/* PA19 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMTXD[6] */
-	/* PA18 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMTXD[7] */
-	/* PA17 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMRXD[7] */
-	/* PA16 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMRXD[6] */
-	/* PA15 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMRXD[5] */
-	/* PA14 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMRXD[4] */
-	/* PA13 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMRXD[3] */
-	/* PA12 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMRXD[2] */
-	/* PA11 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMRXD[1] */
-	/* PA10 */ {   0,   0,	 0,   1,   0,	0   }, /* FCC1 ATMRXD[0] */
-	/* PA9	*/ {   1,   1,	 0,   1,   0,	0   }, /* SMC2 TXD */
-	/* PA8	*/ {   1,   1,	 0,   0,   0,	0   }, /* SMC2 RXD */
-	/* PA7	*/ {   0,   0,	 0,   1,   0,	0   }, /* PA7 */
-	/* PA6	*/ {   0,   0,	 0,   1,   0,	0   }, /* PA6 */
-	/* PA5	*/ {   0,   0,	 0,   1,   0,	0   }, /* PA5 */
-	/* PA4	*/ {   0,   0,	 0,   1,   0,	0   }, /* PA4 */
-	/* PA3	*/ {   0,   0,	 0,   1,   0,	0   }, /* PA3 */
-	/* PA2	*/ {   0,   0,	 0,   1,   0,	0   }, /* PA2 */
-	/* PA1	*/ {   0,   0,	 0,   1,   0,	0   }, /* PA1 */
-	/* PA0	*/ {   0,   0,	 0,   1,   0,	0   }  /* PA0 */
-    },
-
-    /* Port B configuration */
-    {	/*	      conf ppar psor pdir podr pdat */
-	/* PB31 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TX_ER */
-	/* PB30 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RX_DV */
-	/* PB29 */ {   1,   1,	 1,   1,   0,	0   }, /* FCC2 MII TX_EN */
-	/* PB28 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RX_ER */
-	/* PB27 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII COL */
-	/* PB26 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII CRS */
-	/* PB25 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[3] */
-	/* PB24 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[2] */
-	/* PB23 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[1] */
-	/* PB22 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[0] */
-	/* PB21 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[0] */
-	/* PB20 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[1] */
-	/* PB19 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[2] */
-	/* PB18 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[3] */
-	/* PB17 */ {   0,   0,	 0,   0,   0,	0   }, /* PB17 */
-	/* PB16 */ {   0,   0,	 0,   0,   0,	0   }, /* PB16 */
-	/* PB15 */ {   0,   0,	 0,   0,   0,	0   }, /* PB15 */
-	/* PB14 */ {   0,   0,	 0,   0,   0,	0   }, /* PB14 */
-	/* PB13 */ {   0,   0,	 0,   0,   0,	0   }, /* PB13 */
-	/* PB12 */ {   0,   0,	 0,   0,   0,	0   }, /* PB12 */
-	/* PB11 */ {   0,   0,	 0,   0,   0,	0   }, /* PB11 */
-	/* PB10 */ {   0,   0,	 0,   0,   0,	0   }, /* PB10 */
-	/* PB9	*/ {   0,   0,	 0,   0,   0,	0   }, /* PB9 */
-	/* PB8	*/ {   0,   0,	 0,   0,   0,	0   }, /* PB8 */
-	/* PB7	*/ {   0,   0,	 0,   0,   0,	0   }, /* PB7 */
-	/* PB6	*/ {   0,   0,	 0,   0,   0,	0   }, /* PB6 */
-	/* PB5	*/ {   0,   0,	 0,   0,   0,	0   }, /* PB5 */
-	/* PB4	*/ {   0,   0,	 0,   0,   0,	0   }, /* PB4 */
-	/* PB3	*/ {   0,   0,	 0,   0,   0,	0   }, /* pin doesn't exist */
-	/* PB2	*/ {   0,   0,	 0,   0,   0,	0   }, /* pin doesn't exist */
-	/* PB1	*/ {   0,   0,	 0,   0,   0,	0   }, /* pin doesn't exist */
-	/* PB0	*/ {   0,   0,	 0,   0,   0,	0   }  /* pin doesn't exist */
-    },
-
-    /* Port C */
-    {	/*	      conf ppar psor pdir podr pdat */
-	/* PC31 */ {   0,   0,	 0,   1,   0,	0   }, /* PC31 */
-	/* PC30 */ {   0,   0,	 0,   0,   0,	0   }, /* PC30 */
-	/* PC29 */ {   1,   1,	 1,   0,   0,	0   }, /* SCC1 EN *CLSN */
-	/* PC28 */ {   0,   0,	 0,   1,   0,	0   }, /* PC28 */
-	/* PC27 */ {   0,   0,	 0,   1,   0,	0   }, /* PC27 */
-	/* PC26 */ {   0,   0,	 0,   1,   0,	0   }, /* PC26 */
-	/* PC25 */ {   0,   0,	 0,   1,   0,	0   }, /* PC25 */
-	/* PC24 */ {   0,   0,	 0,   1,   0,	0   }, /* PC24 */
-	/* PC23 */ {   0,   1,	 0,   1,   0,	0   }, /* ATMTFCLK */
-	/* PC22 */ {   0,   1,	 0,   0,   0,	0   }, /* ATMRFCLK */
-	/* PC21 */ {   1,   1,	 0,   0,   0,	0   }, /* SCC1 EN RXCLK */
-	/* PC20 */ {   1,   1,	 0,   0,   0,	0   }, /* SCC1 EN TXCLK */
-	/* PC19 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RX_CLK */
-	/* PC18 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII TX_CLK */
-	/* PC17 */ {   1,   0,	 0,   1,   0,	0   }, /* PC17 MDC */
-	/* PC16 */ {   1,   0,	 0,   0,   0,	0   }, /* PC16 MDIO*/
-	/* PC15 */ {   0,   0,	 0,   1,   0,	0   }, /* PC15 */
-	/* PC14 */ {   1,   1,	 0,   0,   0,	0   }, /* SCC1 EN *CD */
-	/* PC13 */ {   0,   0,	 0,   1,   0,	0   }, /* PC13 */
-	/* PC12 */ {   0,   0,	 0,   1,   0,	0   }, /* PC12 */
-	/* PC11 */ {   0,   0,	 0,   1,   0,	0   }, /* PC11 */
-	/* PC10 */ {   0,   0,	 0,   1,   0,	0   }, /* PC10 */
-	/* PC9	*/ {   0,   0,	 0,   1,   0,	0   }, /* PC9 */
-	/* PC8	*/ {   0,   0,	 0,   1,   0,	0   }, /* PC8 */
-	/* PC7	*/ {   0,   0,	 0,   1,   0,	0   }, /* PC7 */
-	/* PC6	*/ {   0,   0,	 0,   1,   0,	0   }, /* PC6 */
-	/* PC5	*/ {   1,   1,	 0,   1,   0,	0   }, /* PC5 SMC1 TXD */
-	/* PC4	*/ {   1,   1,	 0,   0,   0,	0   }, /* PC4 SMC1 RXD */
-	/* PC3	*/ {   0,   0,	 0,   1,   0,	0   }, /* PC3 */
-	/* PC2	*/ {   0,   0,	 0,   1,   0,	1   }, /* ENET FDE */
-	/* PC1	*/ {   0,   0,	 0,   1,   0,	0   }, /* ENET DSQE */
-	/* PC0	*/ {   0,   0,	 0,   1,   0,	0   }, /* ENET LBK */
-    },
-
-    /* Port D */
-    {	/*	      conf ppar psor pdir podr pdat */
-	/* PD31 */ {   1,   1,	 0,   0,   0,	0   }, /* SCC1 EN RxD */
-	/* PD30 */ {   1,   1,	 1,   1,   0,	0   }, /* SCC1 EN TxD */
-	/* PD29 */ {   1,   1,	 0,   1,   0,	0   }, /* SCC1 EN TENA */
-	/* PD28 */ {   0,   0,	 0,   1,   0,	0   }, /* PD28 */
-	/* PD27 */ {   0,   0,	 0,   1,   0,	0   }, /* PD27 */
-	/* PD26 */ {   0,   0,	 0,   1,   0,	0   }, /* PD26 */
-	/* PD25 */ {   0,   0,	 0,   1,   0,	0   }, /* PD25 */
-	/* PD24 */ {   0,   0,	 0,   1,   0,	0   }, /* PD24 */
-	/* PD23 */ {   0,   0,	 0,   1,   0,	0   }, /* PD23 */
-	/* PD22 */ {   0,   0,	 0,   1,   0,	0   }, /* PD22 */
-	/* PD21 */ {   0,   0,	 0,   1,   0,	0   }, /* PD21 */
-	/* PD20 */ {   0,   0,	 0,   1,   0,	0   }, /* PD20 */
-	/* PD19 */ {   0,   0,	 0,   1,   0,	0   }, /* PD19 */
-	/* PD18 */ {   0,   0,	 0,   1,   0,	0   }, /* PD19 */
-	/* PD17 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC1 ATMRXPRTY */
-	/* PD16 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC1 ATMTXPRTY */
-#if defined(CONFIG_SYS_I2C_SOFT)
-	/* PD15 */ {   1,   0,	 0,   1,   1,	1   }, /* I2C SDA */
-	/* PD14 */ {   1,   0,	 0,   1,   1,	1   }, /* I2C SCL */
-#else
-#if defined(CONFIG_HARD_I2C)
-	/* PD15 */ {   1,   1,	 1,   0,   1,	0   }, /* I2C SDA */
-	/* PD14 */ {   1,   1,	 1,   0,   1,	0   }, /* I2C SCL */
-#else /* normal I/O port pins */
-	/* PD15 */ {   0,   1,	 1,   0,   1,	0   }, /* I2C SDA */
-	/* PD14 */ {   0,   1,	 1,   0,   1,	0   }, /* I2C SCL */
-#endif
-#endif
-	/* PD13 */ {   0,   0,	 0,   0,   0,	0   }, /* PD13 */
-	/* PD12 */ {   0,   0,	 0,   0,   0,	0   }, /* PD12 */
-	/* PD11 */ {   0,   0,	 0,   0,   0,	0   }, /* PD11 */
-	/* PD10 */ {   0,   0,	 0,   0,   0,	0   }, /* PD10 */
-	/* PD9	*/ {   1,   1,	 0,   1,   0,	0   }, /* SMC1 TXD */
-	/* PD8	*/ {   1,   1,	 0,   0,   0,	0   }, /* SMC1 RXD */
-	/* PD7	*/ {   0,   0,	 0,   1,   0,	1   }, /* PD7 */
-	/* PD6	*/ {   0,   0,	 0,   1,   0,	1   }, /* PD6 */
-	/* PD5	*/ {   0,   0,	 0,   1,   0,	0   }, /* PD5 */
-	/* PD4	*/ {   0,   0,	 0,   1,   0,	1   }, /* PD4 */
-	/* PD3	*/ {   0,   0,	 0,   0,   0,	0   }, /* pin doesn't exist */
-	/* PD2	*/ {   0,   0,	 0,   0,   0,	0   }, /* pin doesn't exist */
-	/* PD1	*/ {   0,   0,	 0,   0,   0,	0   }, /* pin doesn't exist */
-	/* PD0	*/ {   0,   0,	 0,   0,   0,	0   }  /* pin doesn't exist */
-    }
-};
-
-/* UPM pattern for slow init */
-static const uint upmTableSlow[] =
-{
-    /* Offset	UPM Read Single RAM array entry */
-    /* 0x00 */	0xffffee00, 0x00ffcc80, 0x00ffcf00, 0x00ffdc00,
-    /* 0x04 */	0x00ffce80, 0x00ffcc00, 0x00ffee00, 0x3fffcc07,
-
-		/* UPM Read Burst RAM array entry -> unused */
-    /* 0x08 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x0C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
-		/* UPM Read Burst RAM array entry -> unused */
-    /* 0x10 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x14 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
-		/* UPM Write Single RAM array entry */
-    /* 0x18 */	0xffffee00, 0x00ffec80, 0x00ffef00, 0x00fffc80,
-    /* 0x1C */	0x00fffe00, 0x00ffec00, 0x0fffef00, 0x3fffec05,
-
-		/* UPM Write Burst RAM array entry -> unused */
-    /* 0x20 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x24 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x28 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x2C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
-		/* UPM Refresh Timer RAM array entry -> unused */
-    /* 0x30 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x34 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x38 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
-		/* UPM Exception RAM array entry -> unused */
-    /* 0x3C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-/* UPM pattern for fast init */
-static const uint upmTableFast[] =
-{
-    /* Offset	UPM Read Single RAM array entry */
-    /* 0x00 */	0xffffee00, 0x00ffcc80, 0x00ffcd80, 0x00ffdc00,
-    /* 0x04 */	0x00ffdc00, 0x00ffcf00, 0x00ffec00, 0x3fffcc07,
-
-		/* UPM Read Burst RAM array entry -> unused */
-    /* 0x08 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x0C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
-		/* UPM Read Burst RAM array entry -> unused */
-    /* 0x10 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x14 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-
-		/* UPM Write Single RAM array entry */
-    /* 0x18 */	0xffffee00, 0x00ffec80, 0x00ffee80, 0x00fffc00,
-    /* 0x1C */	0x00fffc00, 0x00ffec00, 0x0fffef00, 0x3fffec05,
-
-		/* UPM Write Burst RAM array entry -> unused */
-    /* 0x20 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x24 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x28 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x2C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
-		/* UPM Refresh Timer RAM array entry -> unused */
-    /* 0x30 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x34 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
-    /* 0x38 */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-
-		/* UPM Exception RAM array entry -> unused */
-    /* 0x3C */	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
-};
-
-
-/* ------------------------------------------------------------------------- */
-
-/* Check Board Identity:
- */
-int checkboard (void)
-{
-	char *p = (char *) HWIB_INFO_START_ADDR;
-
-	puts ("Board: ");
-	if (*((unsigned long *)p) == (unsigned long)CONFIG_SYS_HWINFO_MAGIC) {
-		puts (p);
-	} else {
-		puts ("No HWIB assuming TQM8272");
-	}
-	putc ('\n');
-
-	return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-#if defined(CONFIG_BOARD_GET_CPU_CLK_F)
-static int get_cas_latency (void)
-{
-	/* get it from the option -ts in CIB */
-	/* default is 3 */
-	int	ret = 3;
-	int	pos = 0;
-	char	*p = (char *) CIB_INFO_START_ADDR;
-
-	while ((*p != '\0') && (pos < CIB_INFO_LEN)) {
-		if (*p < ' ' || *p > '~') { /* ASCII strings! */
-			return ret;
-		}
-		if (*p == '-') {
-			if ((p[1] == 't') && (p[2] == 's')) {
-				return (p[4] - '0');
-			}
-		}
-		p++;
-		pos++;
-	}
-	return ret;
-}
-#endif
-
-static ulong set_sdram_timing (volatile uint *sdmr_ptr, ulong sdmr, int col)
-{
-#if defined(CONFIG_BOARD_GET_CPU_CLK_F)
-	int	clk = board_get_cpu_clk_f ();
-	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-	int	busmode = (immr->im_siu_conf.sc_bcr & BCR_EBM ? 1 : 0);
-	int	cas;
-
-	sdmr = sdmr & ~(PSDMR_RFRC_MSK | PSDMR_PRETOACT_MSK | PSDMR_WRC_MSK | \
-			 PSDMR_BUFCMD);
-	if (busmode) {
-		switch (clk) {
-			case 66666666:
-				sdmr |= (PSDMR_RFRC_66MHZ_60X | \
-					PSDMR_PRETOACT_66MHZ_60X | \
-					PSDMR_WRC_66MHZ_60X | \
-					PSDMR_BUFCMD_66MHZ_60X);
-				break;
-			case 100000000:
-				sdmr |= (PSDMR_RFRC_100MHZ_60X | \
-					PSDMR_PRETOACT_100MHZ_60X | \
-					PSDMR_WRC_100MHZ_60X | \
-					PSDMR_BUFCMD_100MHZ_60X);
-				break;
-
-		}
-	} else {
-		switch (clk) {
-			case 66666666:
-				sdmr |= (PSDMR_RFRC_66MHZ_SINGLE | \
-					PSDMR_PRETOACT_66MHZ_SINGLE | \
-					PSDMR_WRC_66MHZ_SINGLE | \
-					PSDMR_BUFCMD_66MHZ_SINGLE);
-				break;
-			case 100000000:
-				sdmr |= (PSDMR_RFRC_100MHZ_SINGLE | \
-					PSDMR_PRETOACT_100MHZ_SINGLE | \
-					PSDMR_WRC_100MHZ_SINGLE | \
-					PSDMR_BUFCMD_100MHZ_SINGLE);
-				break;
-			case 133333333:
-				sdmr |= (PSDMR_RFRC_133MHZ_SINGLE | \
-					PSDMR_PRETOACT_133MHZ_SINGLE | \
-					PSDMR_WRC_133MHZ_SINGLE | \
-					PSDMR_BUFCMD_133MHZ_SINGLE);
-				break;
-		}
-	}
-	cas = get_cas_latency();
-	sdmr &=~ (PSDMR_CL_MSK | PSDMR_LDOTOPRE_MSK);
-	sdmr |= cas;
-	sdmr |= ((cas - 1) << 6);
-	return sdmr;
-#else
-	return sdmr;
-#endif
-}
-
-/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
- *
- * This routine performs standard 8260 initialization sequence
- * and calculates the available memory size. It may be called
- * several times to try different SDRAM configurations on both
- * 60x and local buses.
- */
-static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
-						  ulong orx, volatile uchar * base, int col)
-{
-	volatile uchar c = 0xff;
-	volatile uint *sdmr_ptr;
-	volatile uint *orx_ptr;
-	ulong maxsize, size;
-	int i;
-
-	/* We must be able to test a location outsize the maximum legal size
-	 * to find out THAT we are outside; but this address still has to be
-	 * mapped by the controller. That means, that the initial mapping has
-	 * to be (at least) twice as large as the maximum expected size.
-	 */
-	maxsize = (1 + (~orx | 0x7fff)) / 2;
-
-	/* Since CONFIG_SYS_SDRAM_BASE is always 0 (??), we assume that
-	 * we are configuring CS1 if base != 0
-	 */
-	sdmr_ptr = base ? &memctl->memc_lsdmr : &memctl->memc_psdmr;
-	orx_ptr = base ? &memctl->memc_or2 : &memctl->memc_or1;
-
-	*orx_ptr = orx;
-	sdmr = set_sdram_timing (sdmr_ptr, sdmr, col);
-	/*
-	 * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
-	 *
-	 * "At system reset, initialization software must set up the
-	 *  programmable parameters in the memory controller banks registers
-	 *  (ORx, BRx, P/LSDMR). After all memory parameters are configured,
-	 *  system software should execute the following initialization sequence
-	 *  for each SDRAM device.
-	 *
-	 *  1. Issue a PRECHARGE-ALL-BANKS command
-	 *  2. Issue eight CBR REFRESH commands
-	 *  3. Issue a MODE-SET command to initialize the mode register
-	 *
-	 *  The initial commands are executed by setting P/LSDMR[OP] and
-	 *  accessing the SDRAM with a single-byte transaction."
-	 *
-	 * The appropriate BRx/ORx registers have already been set when we
-	 * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
-	 */
-
-	*sdmr_ptr = sdmr | PSDMR_OP_PREA;
-	*base = c;
-
-	*sdmr_ptr = sdmr | PSDMR_OP_CBRR;
-	for (i = 0; i < 8; i++)
-		*base = c;
-
-	*sdmr_ptr = sdmr | PSDMR_OP_MRW;
-	*(base + CONFIG_SYS_MRS_OFFS) = c;	/* setting MR on address lines */
-
-	*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
-	*base = c;
-
-	size = get_ram_size((long *)base, maxsize);
-	*orx_ptr = orx | ~(size - 1);
-
-	return (size);
-}
-
-phys_size_t initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8260_t *memctl = &immap->im_memctl;
-
-#ifndef CONFIG_SYS_RAMBOOT
-	long size8, size9;
-#endif
-	long psize;
-
-	psize = 16 * 1024 * 1024;
-
-	memctl->memc_psrt = CONFIG_SYS_PSRT;
-	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-
-#ifndef CONFIG_SYS_RAMBOOT
-	/* 60x SDRAM setup:
-	 */
-	size8 = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL,
-					  (uchar *) CONFIG_SYS_SDRAM_BASE, 8);
-	size9 = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR1_9COL,
-					  (uchar *) CONFIG_SYS_SDRAM_BASE, 9);
-
-	if (size8 < size9) {
-		psize = size9;
-		printf ("(60x:9COL - %ld MB, ", psize >> 20);
-	} else {
-		psize = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL,
-						  (uchar *) CONFIG_SYS_SDRAM_BASE, 8);
-		printf ("(60x:8COL - %ld MB, ", psize >> 20);
-	}
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
-	icache_enable ();
-
-	return (psize);
-}
-
-
-static inline int scanChar (char *p, int len, unsigned long *number)
-{
-	int	akt = 0;
-
-	*number = 0;
-	while (akt < len) {
-		if ((*p >= '0') && (*p <= '9')) {
-			*number *= 10;
-			*number += *p - '0';
-			p += 1;
-		} else {
-			if (*p == '-')	return akt;
-			return -1;
-		}
-		akt ++;
-	}
-	return akt;
-}
-
-static int dump_hwib(void)
-{
-	HWIB_INFO	*hw = &hwinf;
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-
-	if (i < 0)
-		buf[0] = '\0';
-
-	if (hw->OK) {
-		printf ("HWIB on %x\n", HWIB_INFO_START_ADDR);
-		printf ("serial : %s\n", buf);
-		printf ("ethaddr: %s\n", hw->ethaddr);
-		printf ("FLASH	: %x nr:%d\n", hw->flash, hw->flash_nr);
-		printf ("RAM	: %x cs:%d\n", hw->ram, hw->ram_cs);
-		printf ("CPU	: %lu\n", hw->cpunr);
-		printf ("CAN	: %d\n", hw->can);
-		if (hw->eeprom) printf ("EEprom : %x\n", hw->eeprom);
-		else printf ("No EEprom\n");
-		if (hw->nand) {
-			printf ("NAND	: %x\n", hw->nand);
-			printf ("NAND CS: %d\n", hw->nand_cs);
-		} else { printf ("No NAND\n");}
-		printf ("Bus %s mode.\n", (hw->Bus ? "60x" : "Single PQII"));
-		printf ("  real : %s\n", (immr->im_siu_conf.sc_bcr & BCR_EBM ? \
-				 "60x" : "Single PQII"));
-		printf ("Option : %lx\n", hw->option);
-		printf ("%s Security Engine\n", (hw->SecEng ? "with" : "no"));
-		printf ("CPM Clk: %d\n", hw->cpmcl);
-		printf ("CPU Clk: %d\n", hw->cpucl);
-		printf ("Bus Clk: %d\n", hw->buscl);
-		if (hw->busclk_real_ok) {
-			printf ("  real Clk: %d\n", hw->busclk_real);
-		}
-		printf ("CAS	: %d\n", get_cas_latency());
-	} else {
-		printf("HWIB @%x not OK\n", HWIB_INFO_START_ADDR);
-	}
-	return 0;
-}
-
-static inline int search_real_busclk (int *clk)
-{
-	int	part = 0, pos = 0;
-	char *p = (char *) CIB_INFO_START_ADDR;
-	int	ok = 0;
-
-	while ((*p != '\0') && (pos < CIB_INFO_LEN)) {
-		if (*p < ' ' || *p > '~') { /* ASCII strings! */
-			return 0;
-		}
-		switch (part) {
-		default:
-			if (*p == '-') {
-				++part;
-			}
-			break;
-		case 3:
-			if (*p == '-') {
-				++part;
-				break;
-			}
-			if (*p == 'b') {
-				ok = 1;
-				p++;
-				break;
-			}
-			if (ok) {
-				switch (*p) {
-				case '6':
-					*clk = 66666666;
-					return 1;
-					break;
-				case '1':
-					if (p[1] == '3') {
-						*clk = 133333333;
-					} else {
-						*clk = 100000000;
-					}
-					return 1;
-					break;
-				}
-			}
-			break;
-		}
-		p++;
-	}
-	return 0;
-}
-
-int analyse_hwib (void)
-{
-	char	*p = (char *) HWIB_INFO_START_ADDR;
-	int	anz;
-	int	part = 1, i = 0, pos = 0;
-	HWIB_INFO	*hw = &hwinf;
-
-	deb_printf(" %s pointer: %p\n", __FUNCTION__, p);
-	/* Head = TQM */
-	if (*((unsigned long *)p) != (unsigned long)CONFIG_SYS_HWINFO_MAGIC) {
-		deb_printf("No HWIB\n");
-		return -1;
-	}
-	p += 3;
-	if (scanChar (p, 4, &hw->cpunr) < 0) {
-		deb_printf("No CPU\n");
-		return -2;
-	}
-	p +=4;
-
-	hw->flash = 0x200000 << (*p - 'A');
-	p++;
-	hw->flash_nr = *p - '0';
-	p++;
-
-	hw->ram = 0x2000000 << (*p - 'A');
-	p++;
-	if (*p == '2') {
-		hw->ram_cs = 2;
-		p++;
-	}
-
-	if (*p == 'A') hw->can = 1;
-	if (*p == 'B') hw->can = 2;
-	p +=1;
-	p +=1;	/* connector */
-	if (*p != '0') {
-		hw->eeprom = 0x1000 << (*p - 'A');
-	}
-	p++;
-
-	if ((*p < '0') || (*p > '9')) {
-		/* NAND before z-option */
-		hw->nand = 0x8000000 << (*p - 'A');
-		p++;
-		hw->nand_cs = *p - '0';
-		p += 2;
-	}
-	/* z-option */
-	anz = scanChar (p, 4, &hw->option);
-	if (anz < 0) {
-		deb_printf("No option\n");
-		return -3;
-	}
-	if (hw->option & 0x8) hw->Bus = 1;
-	p += anz;
-	if (*p != '-') {
-		deb_printf("No -\n");
-		return -4;
-	}
-	p++;
-	/* C option */
-	if (*p == 'E') {
-		hw->SecEng = 1;
-		p++;
-	}
-	switch (*p) {
-		case 'M': hw->cpucl = 266666666;
-			break;
-		case 'P': hw->cpucl = 300000000;
-			break;
-		case 'T': hw->cpucl = 400000000;
-			break;
-		default:
-			deb_printf("No CPU Clk: %c\n", *p);
-			return -5;
-			break;
-	}
-	p++;
-	switch (*p) {
-		case 'I': hw->cpmcl = 200000000;
-			break;
-		case 'M': hw->cpmcl = 300000000;
-			break;
-		default:
-			deb_printf("No CPM Clk\n");
-			return -6;
-			break;
-	}
-	p++;
-	switch (*p) {
-		case 'B': hw->buscl = 66666666;
-			break;
-		case 'E': hw->buscl = 100000000;
-			break;
-		case 'F': hw->buscl = 133333333;
-			break;
-		default:
-			deb_printf("No BUS Clk\n");
-			return -7;
-			break;
-	}
-	p++;
-
-	hw->OK = 1;
-	/* search MAC Address */
-	while ((*p != '\0') && (pos < CONFIG_SYS_HWINFO_SIZE)) {
-		if (*p < ' ' || *p > '~') { /* ASCII strings! */
-			return 0;
-		}
-		switch (part) {
-		default:
-			if (*p == ' ') {
-				++part;
-				i = 0;
-			}
-			break;
-		case 3:			/* Copy MAC address */
-			if (*p == ' ') {
-				++part;
-				i = 0;
-				break;
-			}
-			hw->ethaddr[i++] = *p;
-			if ((i % 3) == 2)
-				hw->ethaddr[i++] = ':';
-			break;
-
-		}
-		p++;
-	}
-
-	hw->busclk_real_ok = search_real_busclk (&hw->busclk_real);
-	return 0;
-}
-
-#if defined(CONFIG_GET_CPU_STR_F)
-/* !! This routine runs from Flash */
-char get_cpu_str_f (char *buf)
-{
-	char *p = (char *) HWIB_INFO_START_ADDR;
-	int	i = 0;
-
-	buf[i++] = 'M';
-	buf[i++] = 'P';
-	buf[i++] = 'C';
-	if (*((unsigned long *)p) == (unsigned long)CONFIG_SYS_HWINFO_MAGIC) {
-		buf[i++] = *&p[3];
-		buf[i++] = *&p[4];
-		buf[i++] = *&p[5];
-		buf[i++] = *&p[6];
-	} else {
-		buf[i++] = '8';
-		buf[i++] = '2';
-		buf[i++] = '7';
-		buf[i++] = 'x';
-	}
-	buf[i++] = 0;
-	return 0;
-}
-#endif
-
-#if defined(CONFIG_BOARD_GET_CPU_CLK_F)
-/* !! This routine runs from Flash */
-unsigned long board_get_cpu_clk_f (void)
-{
-	char *p = (char *) HWIB_INFO_START_ADDR;
-	int i = 0;
-
-	if (*((unsigned long *)p) == (unsigned long)CONFIG_SYS_HWINFO_MAGIC) {
-		if (search_real_busclk (&i))
-			return i;
-	}
-	return CONFIG_8260_CLKIN;
-}
-#endif
-
-#if CONFIG_BOARD_EARLY_INIT_R
-
-static int can_test (unsigned long off)
-{
-	volatile unsigned char	*base	= (unsigned char *) (CONFIG_SYS_CAN_BASE + off);
-
-	*(base + 0x17) = 'T';
-	*(base + 0x18) = 'Q';
-	*(base + 0x19) = 'M';
-	if ((*(base + 0x17) != 'T') ||
-	    (*(base + 0x18) != 'Q') ||
-	    (*(base + 0x19) != 'M')) {
-		return 0;
-	}
-	return 1;
-}
-
-static int can_config_one (unsigned long off)
-{
-	volatile unsigned char	*ctrl	= (unsigned char *) (CONFIG_SYS_CAN_BASE + off);
-	volatile unsigned char	*cpu_if = (unsigned char *) (CONFIG_SYS_CAN_BASE + off + 0x02);
-	volatile unsigned char	*clkout = (unsigned char *) (CONFIG_SYS_CAN_BASE + off + 0x1f);
-	unsigned char temp;
-
-	*cpu_if = 0x45;
-	temp = *ctrl;
-	temp |= 0x40;
-	*ctrl	= temp;
-	*clkout = 0x20;
-	temp = *ctrl;
-	temp &= ~0x40;
-	*ctrl	= temp;
-	return 0;
-}
-
-static int can_config (void)
-{
-	int	ret = 0;
-	can_config_one (0);
-	if (hwinf.can == 2) {
-		can_config_one (0x100);
-	}
-	/* make Test if they really there */
-	ret += can_test (0);
-	ret += can_test (0x100);
-	return ret;
-}
-
-static int init_can (void)
-{
-	volatile immap_t * immr = (immap_t *)CONFIG_SYS_IMMR;
-	volatile memctl8260_t *memctl = &immr->im_memctl;
-	int	count = 0;
-
-	if ((hwinf.OK) && (hwinf.can)) {
-		memctl->memc_or4 = CONFIG_SYS_CAN_OR;
-		memctl->memc_br4 = CONFIG_SYS_CAN_BR;
-		/* upm Init */
-		upmconfig (UPMC, (uint *) upmTableFast,
-			   sizeof (upmTableFast) / sizeof (uint));
-		memctl->memc_mcmr =	(MxMR_DSx_3_CYCL |
-					MxMR_GPL_x4DIS |
-					MxMR_RLFx_2X |
-					MxMR_WLFx_2X |
-					MxMR_OP_NORM);
-		/* can configure */
-		count = can_config ();
-		printf ("CAN:	%d @ %x\n", count, CONFIG_SYS_CAN_BASE);
-		if (hwinf.can != count) printf("!!! difference to HWIB\n");
-	} else {
-		printf ("CAN:	No\n");
-	}
-	return 0;
-}
-
-int board_early_init_r(void)
-{
-	analyse_hwib ();
-	init_can ();
-	return 0;
-}
-#endif
-
-int do_hwib_dump (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
-	dump_hwib ();
-	return 0;
-}
-
-U_BOOT_CMD(
-	  hwib, 1,	1,	do_hwib_dump,
-	  "dump HWIB'",
-	  ""
-);
-
-#ifdef CONFIG_SYS_UPDATE_FLASH_SIZE
-static int get_flash_timing (void)
-{
-	/* get it from the option -tf in CIB */
-	/* default is 0x00000c84 */
-	int	ret = 0x00000c84;
-	int	pos = 0;
-	int	nr = 0;
-	char	*p = (char *) CIB_INFO_START_ADDR;
-
-	while ((*p != '\0') && (pos < CIB_INFO_LEN)) {
-		if (*p < ' ' || *p > '~') { /* ASCII strings! */
-			return ret;
-		}
-		if (*p == '-') {
-			if ((p[1] == 't') && (p[2] == 'f')) {
-				p += 6;
-				ret = 0;
-				while (nr < 8) {
-				if ((*p >= '0') && (*p <= '9')) {
-					ret *= 0x10;
-					ret += *p - '0';
-					p += 1;
-					nr ++;
-				} else if ((*p >= 'A') && (*p <= 'F')) {
-					ret *= 10;
-					ret += *p - '7';
-					p += 1;
-					nr ++;
-				} else {
-					if (nr < 8) return 0x00000c84;
-					return ret;
-				}
-				}
-			}
-		}
-		p++;
-		pos++;
-	}
-	return ret;
-}
-
-/* Update the Flash_Size and the Flash Timing */
-int update_flash_size (int flash_size)
-{
-	volatile immap_t * immr = (immap_t *)CONFIG_SYS_IMMR;
-	volatile memctl8260_t *memctl = &immr->im_memctl;
-	unsigned long reg;
-	unsigned long tim;
-
-	/* I must use reg, otherwise the board hang */
-	reg = memctl->memc_or0;
-	reg &= ~ORxU_AM_MSK;
-	reg |= MEG_TO_AM(flash_size >> 20);
-	tim = get_flash_timing ();
-	reg &= ~0xfff;
-	reg |= (tim & 0xfff);
-	memctl->memc_or0 = reg;
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_PCI
-struct pci_controller hose;
-
-int board_early_init_f (void)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
-	immap->im_clkrst.car_sccr |= M826X_SCCR_PCI_MODE_EN;
-	return 0;
-}
-
-extern void pci_mpc8250_init(struct pci_controller *);
-
-void pci_init_board(void)
-{
-	pci_mpc8250_init(&hose);
-}
-#endif
-
-int board_eth_init(bd_t *bis)
-{
-	return pci_eth_init(bis);
-}
diff --git a/board/tqc/tqm8272/tqm8272.h b/board/tqc/tqm8272/tqm8272.h
deleted file mode 100644
index 1eeaf0e993..0000000000
--- a/board/tqc/tqm8272/tqm8272.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * (C) Copyright 2008
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef	_TQM8272_HEADER_H
-#define	_TQM8272_HEADER_H
-
-#define _NOT_USED_	0xFFFFFFFF
-
-typedef struct{
-	int	Bus;
-	int	flash;
-	int	flash_nr;
-	int	ram;
-	int	ram_cs;
-	int	nand;
-	int	nand_cs;
-	int	eeprom;
-	int	can;
-	unsigned long	cpunr;
-	unsigned long	option;
-	int	SecEng;
-	int	cpucl;
-	int	cpmcl;
-	int	buscl;
-	int	busclk_real_ok;
-	int	busclk_real;
-	unsigned char	OK;
-	unsigned char  ethaddr[20];
-} HWIB_INFO;
-
-static HWIB_INFO	hwinf = {0, 0, 1, 0, 1, 0, 0, 0, 0, 8272, 0 ,0,
-			 0, 0, 0, 0, 0, 0};
-#endif	/* __CONFIG_H */