[ppc4xx] Add initial lwmon5 board support

This patch adds initial support for the Liebherr lwmon5 board euqipped
with an AMCC 440EPx PowerPC.

Signed-off-by: Stefan Roese <sr@denx.de>

1 files changed, 598 insertions, 0 deletions

diff --git a/board/lwmon5/sdram.c b/board/lwmon5/sdram.c
new file mode 100644
index 0000000000..d2eb5bd1a8
--- /dev/null
+++ b/board/lwmon5/sdram.c
@@ -0,0 +1,598 @@
+/*
+ * (C) Copyright 2006
+ * Sylvie Gohl,             AMCC/IBM, gohl.sylvie@fr.ibm.com
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Thierry Roman,           AMCC/IBM, thierry_roman@fr.ibm.com
+ * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
+ * Robert Snyder,           AMCC/IBM, rob.snyder@fr.ibm.com
+ *
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* define DEBUG for debugging output (obviously ;-)) */
+#if 0
+#define DEBUG
+#endif
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/io.h>
+#include <ppc440.h>
+
+#include "sdram.h"
+
+/*
+ * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
+ * region. Right now the cache should still be disabled in U-Boot because of the
+ * EMAC driver, that need it's buffer descriptor to be located in non cached
+ * memory.
+ *
+ * If at some time this restriction doesn't apply anymore, just define
+ * CFG_ENABLE_SDRAM_CACHE in the board config file and this code should setup
+ * everything correctly.
+ */
+#ifdef CFG_ENABLE_SDRAM_CACHE
+#define MY_TLB_WORD2_I_ENABLE   0                       /* enable caching on SDRAM */
+#else
+#define MY_TLB_WORD2_I_ENABLE   TLB_WORD2_I_ENABLE      /* disable caching on SDRAM */
+#endif
+
+void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
+void dcbz_area(u32 start_address, u32 num_bytes);
+void dflush(void);
+
+#ifdef CONFIG_ADD_RAM_INFO
+static u32 is_ecc_enabled(void)
+{
+	u32 val;
+
+	mfsdram(DDR0_22, val);
+	val &= DDR0_22_CTRL_RAW_MASK;
+	if (val)
+		return 1;
+	else
+		return 0;
+}
+
+void board_add_ram_info(int use_default)
+{
+	PPC440_SYS_INFO board_cfg;
+	u32 val;
+
+	if (is_ecc_enabled())
+		puts(" (ECC");
+	else
+		puts(" (ECC not");
+
+	get_sys_info(&board_cfg);
+	printf(" enabled, %d MHz", (board_cfg.freqPLB * 2) / 1000000);
+
+	mfsdram(DDR0_03, val);
+	val = DDR0_03_CASLAT_DECODE(val);
+	printf(", CL%d)", val);
+}
+#endif
+
+static int wait_for_dlllock(void)
+{
+	u32 val;
+	int wait = 0;
+
+	/*
+	 * Wait for the DCC master delay line to finish calibration
+	 */
+	mtdcr(ddrcfga, DDR0_17);
+	val = DDR0_17_DLLLOCKREG_UNLOCKED;
+
+	while (wait != 0xffff) {
+		val = mfdcr(ddrcfgd);
+		if ((val & DDR0_17_DLLLOCKREG_MASK) == DDR0_17_DLLLOCKREG_LOCKED)
+			/* dlllockreg bit on */
+			return 0;
+		else
+			wait++;
+	}
+	debug("0x%04x: DDR0_17 Value (dlllockreg bit): 0x%08x\n", wait, val);
+	debug("Waiting for dlllockreg bit to raise\n");
+
+	return -1;
+}
+
+#if defined(CONFIG_DDR_DATA_EYE)
+int wait_for_dram_init_complete(void)
+{
+	u32 val;
+	int wait = 0;
+
+	/*
+	 * Wait for 'DRAM initialization complete' bit in status register
+	 */
+	mtdcr(ddrcfga, DDR0_00);
+
+	while (wait != 0xffff) {
+		val = mfdcr(ddrcfgd);
+		if ((val & DDR0_00_INT_STATUS_BIT6) == DDR0_00_INT_STATUS_BIT6)
+			/* 'DRAM initialization complete' bit */
+			return 0;
+		else
+			wait++;
+	}
+
+	debug("DRAM initialization complete bit in status register did not rise\n");
+
+	return -1;
+}
+
+#define NUM_TRIES 64
+#define NUM_READS 10
+
+void denali_core_search_data_eye(u32 start_addr, u32 memory_size)
+{
+	int k, j;
+	u32 val;
+	u32 wr_dqs_shift, dqs_out_shift, dll_dqs_delay_X;
+	u32 max_passing_cases = 0, wr_dqs_shift_with_max_passing_cases = 0;
+	u32 passing_cases = 0, dll_dqs_delay_X_sw_val = 0;
+	u32 dll_dqs_delay_X_start_window = 0, dll_dqs_delay_X_end_window = 0;
+	volatile u32 *ram_pointer;
+	u32 test[NUM_TRIES] = {
+		0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+		0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+		0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+		0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+		0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+		0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+		0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+		0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+		0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+		0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+		0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+		0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+		0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+		0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+		0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+		0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
+
+	ram_pointer = (volatile u32 *)start_addr;
+
+	for (wr_dqs_shift = 64; wr_dqs_shift < 96; wr_dqs_shift++) {
+		/*for (wr_dqs_shift=1; wr_dqs_shift<96; wr_dqs_shift++) {*/
+
+		/*
+		 * De-assert 'start' parameter.
+		 */
+		mtdcr(ddrcfga, DDR0_02);
+		val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
+		mtdcr(ddrcfgd, val);
+
+		/*
+		 * Set 'wr_dqs_shift'
+		 */
+		mtdcr(ddrcfga, DDR0_09);
+		val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
+			| DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
+		mtdcr(ddrcfgd, val);
+
+		/*
+		 * Set 'dqs_out_shift' = wr_dqs_shift + 32
+		 */
+		dqs_out_shift = wr_dqs_shift + 32;
+		mtdcr(ddrcfga, DDR0_22);
+		val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
+			| DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
+		mtdcr(ddrcfgd, val);
+
+		passing_cases = 0;
+
+		for (dll_dqs_delay_X = 1; dll_dqs_delay_X < 64; dll_dqs_delay_X++) {
+			/*for (dll_dqs_delay_X=1; dll_dqs_delay_X<128; dll_dqs_delay_X++) {*/
+			/*
+			 * Set 'dll_dqs_delay_X'.
+			 */
+			/* dll_dqs_delay_0 */
+			mtdcr(ddrcfga, DDR0_17);
+			val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
+				| DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
+			mtdcr(ddrcfgd, val);
+			/* dll_dqs_delay_1 to dll_dqs_delay_4 */
+			mtdcr(ddrcfga, DDR0_18);
+			val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
+				| DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
+				| DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
+				| DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
+				| DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
+			mtdcr(ddrcfgd, val);
+			/* dll_dqs_delay_5 to dll_dqs_delay_8 */
+			mtdcr(ddrcfga, DDR0_19);
+			val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
+				| DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
+				| DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
+				| DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
+				| DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
+			mtdcr(ddrcfgd, val);
+
+			ppcMsync();
+			ppcMbar();
+
+			/*
+			 * Assert 'start' parameter.
+			 */
+			mtdcr(ddrcfga, DDR0_02);
+			val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
+			mtdcr(ddrcfgd, val);
+
+			ppcMsync();
+			ppcMbar();
+
+			/*
+			 * Wait for the DCC master delay line to finish calibration
+			 */
+			if (wait_for_dlllock() != 0) {
+				printf("dlllock did not occur !!!\n");
+				printf("denali_core_search_data_eye!!!\n");
+				printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
+				       wr_dqs_shift, dll_dqs_delay_X);
+				hang();
+			}
+			ppcMsync();
+			ppcMbar();
+
+			if (wait_for_dram_init_complete() != 0) {
+				printf("dram init complete did not occur !!!\n");
+				printf("denali_core_search_data_eye!!!\n");
+				printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
+				       wr_dqs_shift, dll_dqs_delay_X);
+				hang();
+			}
+			udelay(100);  /* wait 100us to ensure init is really completed !!! */
+
+			/* write values */
+			for (j=0; j<NUM_TRIES; j++) {
+				ram_pointer[j] = test[j];
+
+				/* clear any cache at ram location */
+				__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
+			}
+
+			/* read values back */
+			for (j=0; j<NUM_TRIES; j++) {
+				for (k=0; k<NUM_READS; k++) {
+					/* clear any cache at ram location */
+					__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
+
+					if (ram_pointer[j] != test[j])
+						break;
+				}
+
+				/* read error */
+				if (k != NUM_READS)
+					break;
+			}
+
+			/* See if the dll_dqs_delay_X value passed.*/
+			if (j < NUM_TRIES) {
+				/* Failed */
+				passing_cases = 0;
+				/* break; */
+			} else {
+				/* Passed */
+				if (passing_cases == 0)
+					dll_dqs_delay_X_sw_val = dll_dqs_delay_X;
+				passing_cases++;
+				if (passing_cases >= max_passing_cases) {
+					max_passing_cases = passing_cases;
+					wr_dqs_shift_with_max_passing_cases = wr_dqs_shift;
+					dll_dqs_delay_X_start_window = dll_dqs_delay_X_sw_val;
+					dll_dqs_delay_X_end_window = dll_dqs_delay_X;
+				}
+			}
+
+			/*
+			 * De-assert 'start' parameter.
+			 */
+			mtdcr(ddrcfga, DDR0_02);
+			val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
+			mtdcr(ddrcfgd, val);
+
+		} /* for (dll_dqs_delay_X=0; dll_dqs_delay_X<128; dll_dqs_delay_X++) */
+
+	} /* for (wr_dqs_shift=0; wr_dqs_shift<96; wr_dqs_shift++) */
+
+	/*
+	 * Largest passing window is now detected.
+	 */
+
+	/* Compute dll_dqs_delay_X value */
+	dll_dqs_delay_X = (dll_dqs_delay_X_end_window + dll_dqs_delay_X_start_window) / 2;
+	wr_dqs_shift = wr_dqs_shift_with_max_passing_cases;
+
+	debug("DQS calibration - Window detected:\n");
+	debug("max_passing_cases = %d\n", max_passing_cases);
+	debug("wr_dqs_shift      = %d\n", wr_dqs_shift);
+	debug("dll_dqs_delay_X   = %d\n", dll_dqs_delay_X);
+	debug("dll_dqs_delay_X window = %d - %d\n",
+	      dll_dqs_delay_X_start_window, dll_dqs_delay_X_end_window);
+
+	/*
+	 * De-assert 'start' parameter.
+	 */
+	mtdcr(ddrcfga, DDR0_02);
+	val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
+	mtdcr(ddrcfgd, val);
+
+	/*
+	 * Set 'wr_dqs_shift'
+	 */
+	mtdcr(ddrcfga, DDR0_09);
+	val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
+		| DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
+	mtdcr(ddrcfgd, val);
+	debug("DDR0_09=0x%08lx\n", val);
+
+	/*
+	 * Set 'dqs_out_shift' = wr_dqs_shift + 32
+	 */
+	dqs_out_shift = wr_dqs_shift + 32;
+	mtdcr(ddrcfga, DDR0_22);
+	val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
+		| DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
+	mtdcr(ddrcfgd, val);
+	debug("DDR0_22=0x%08lx\n", val);
+
+	/*
+	 * Set 'dll_dqs_delay_X'.
+	 */
+	/* dll_dqs_delay_0 */
+	mtdcr(ddrcfga, DDR0_17);
+	val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
+		| DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
+	mtdcr(ddrcfgd, val);
+	debug("DDR0_17=0x%08lx\n", val);
+
+	/* dll_dqs_delay_1 to dll_dqs_delay_4 */
+	mtdcr(ddrcfga, DDR0_18);
+	val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
+		| DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
+		| DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
+		| DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
+		| DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
+	mtdcr(ddrcfgd, val);
+	debug("DDR0_18=0x%08lx\n", val);
+
+	/* dll_dqs_delay_5 to dll_dqs_delay_8 */
+	mtdcr(ddrcfga, DDR0_19);
+	val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
+		| DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
+		| DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
+		| DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
+		| DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
+	mtdcr(ddrcfgd, val);
+	debug("DDR0_19=0x%08lx\n", val);
+
+	/*
+	 * Assert 'start' parameter.
+	 */
+	mtdcr(ddrcfga, DDR0_02);
+	val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
+	mtdcr(ddrcfgd, val);
+
+	ppcMsync();
+	ppcMbar();
+
+	/*
+	 * Wait for the DCC master delay line to finish calibration
+	 */
+	if (wait_for_dlllock() != 0) {
+		printf("dlllock did not occur !!!\n");
+		hang();
+	}
+	ppcMsync();
+	ppcMbar();
+
+	if (wait_for_dram_init_complete() != 0) {
+		printf("dram init complete did not occur !!!\n");
+		hang();
+	}
+	udelay(100);  /* wait 100us to ensure init is really completed !!! */
+}
+#endif /* CONFIG_DDR_DATA_EYE */
+
+#ifdef CONFIG_DDR_ECC
+static void wait_ddr_idle(void)
+{
+	/*
+	 * Controller idle status cannot be determined for Denali
+	 * DDR2 code. Just return here.
+	 */
+}
+
+static void blank_string(int size)
+{
+	int i;
+
+	for (i=0; i<size; i++)
+		putc('\b');
+	for (i=0; i<size; i++)
+		putc(' ');
+	for (i=0; i<size; i++)
+		putc('\b');
+}
+
+static void program_ecc(u32 start_address,
+			u32 num_bytes,
+			u32 tlb_word2_i_value)
+{
+	u32 current_address;
+	u32 end_address;
+	u32 address_increment;
+	u32 val;
+	char str[] = "ECC generation -";
+	char slash[] = "\\|/-\\|/-";
+	int loop = 0;
+	int loopi = 0;
+
+	current_address = start_address;
+
+	sync();
+	eieio();
+	wait_ddr_idle();
+
+	if (tlb_word2_i_value == TLB_WORD2_I_ENABLE) {
+		/* ECC bit set method for non-cached memory */
+		address_increment = 4;
+		end_address = current_address + num_bytes;
+
+		puts(str);
+
+		while (current_address < end_address) {
+			*((u32 *)current_address) = 0x00000000;
+			current_address += address_increment;
+
+			if ((loop++ % (2 << 20)) == 0) {
+				putc('\b');
+				putc(slash[loopi++ % 8]);
+			}
+		}
+
+		blank_string(strlen(str));
+	} else {
+		/* ECC bit set method for cached memory */
+		dcbz_area(start_address, num_bytes);
+		dflush();
+	}
+
+	sync();
+	eieio();
+	wait_ddr_idle();
+
+	/* Clear error status */
+	mfsdram(DDR0_00, val);
+	mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL);
+
+	/* Set 'int_mask' parameter to functionnal value */
+	mfsdram(DDR0_01, val);
+	mtsdram(DDR0_01, ((val &~ DDR0_01_INT_MASK_MASK) | DDR0_01_INT_MASK_ALL_OFF));
+
+	sync();
+	eieio();
+	wait_ddr_idle();
+}
+#endif
+
+static __inline__ u32 get_mcsr(void)
+{
+	u32 val;
+
+	asm volatile("mfspr %0, 0x23c" : "=r" (val) :);
+	return val;
+}
+
+static __inline__ void set_mcsr(u32 val)
+{
+	asm volatile("mtspr 0x23c, %0" : "=r" (val) :);
+}
+
+/*************************************************************************
+ *
+ * initdram -- 440EPx's DDR controller is a DENALI Core
+ *
+ ************************************************************************/
+long int initdram (int board_type)
+{
+	u32 val;
+
+	mtsdram(DDR0_02, 0x00000000);
+
+	mtsdram(DDR0_00, 0x0000190A);
+	mtsdram(DDR0_01, 0x01000000);
+	mtsdram(DDR0_03, 0x02030603); /* A suitable burst length was taken. CAS is right for our board */
+
+	mtsdram(DDR0_04, 0x0A030300);
+	mtsdram(DDR0_05, 0x02020308);
+	mtsdram(DDR0_06, 0x0103C812);
+	mtsdram(DDR0_07, 0x00090100);
+	mtsdram(DDR0_08, 0x02c80001);
+	mtsdram(DDR0_09, 0x00011D5F);
+	mtsdram(DDR0_10, 0x00000300);
+	mtsdram(DDR0_11, 0x000CC800);
+	mtsdram(DDR0_12, 0x00000003);
+	mtsdram(DDR0_14, 0x00000000);
+	mtsdram(DDR0_17, 0x1e000000);
+	mtsdram(DDR0_18, 0x1e1e1e1e);
+	mtsdram(DDR0_19, 0x1e1e1e1e);
+	mtsdram(DDR0_20, 0x0B0B0B0B);
+	mtsdram(DDR0_21, 0x0B0B0B0B);
+#ifdef CONFIG_DDR_ECC
+	mtsdram(DDR0_22, 0x00267F0B | DDR0_22_CTRL_RAW_ECC_ENABLE); /* enable ECC	*/
+#else
+	mtsdram(DDR0_22, 0x00267F0B);
+#endif
+
+	mtsdram(DDR0_23, 0x01000000);
+	mtsdram(DDR0_24, 0x01010001);
+
+	mtsdram(DDR0_26, 0x2D93028A);
+	mtsdram(DDR0_27, 0x0784682B);
+
+	mtsdram(DDR0_28, 0x00000080);
+	mtsdram(DDR0_31, 0x00000000);
+	mtsdram(DDR0_42, 0x01000006);
+
+	mtsdram(DDR0_43, 0x030A0200);
+	mtsdram(DDR0_44, 0x00000003);
+	mtsdram(DDR0_02, 0x00000001); /* Activate the denali core */
+
+	wait_for_dlllock();
+
+        /*
+	 * Program tlb entries for this size (dynamic)
+	 */
+        program_tlb(0, 0, CFG_MBYTES_SDRAM << 20, MY_TLB_WORD2_I_ENABLE);
+
+	/*
+	 * Setup 2nd TLB with same physical address but different virtual address
+	 * with cache enabled. This is done for fast ECC generation.
+	 */
+        program_tlb(0, CFG_DDR_CACHED_ADDR, CFG_MBYTES_SDRAM << 20, 0);
+
+#ifdef CONFIG_DDR_DATA_EYE
+	/*
+	 * Perform data eye search if requested.
+	 */
+	denali_core_search_data_eye(CFG_DDR_CACHED_ADDR, CFG_MBYTES_SDRAM << 20);
+
+	/*
+	 * Clear possible errors resulting from data-eye-search.
+	 * If not done, then we could get an interrupt later on when
+	 * exceptions are enabled.
+	 */
+	val = get_mcsr();
+	set_mcsr(val);
+#endif
+
+#ifdef CONFIG_DDR_ECC
+	/*
+	 * If ECC is enabled, initialize the parity bits.
+	 */
+	program_ecc(CFG_DDR_CACHED_ADDR, CFG_MBYTES_SDRAM << 20, 0);
+#endif
+
+	return (CFG_MBYTES_SDRAM << 20);
+}