ARM: remove a320evb board support

This is still a non-generic board.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Po-Yu Chuang <ratbert@faraday-tech.com>
Acked-by: Marek Vasut <marex@denx.de>

6 files changed, 0 insertions, 165 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index db31be9217..f6a17207a9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -73,10 +73,6 @@ config TARGET_INTEGRATORCP_CM920T
 	bool "Support integratorcp_cm920t"
 	select CPU_ARM920T
 
-config TARGET_A320EVB
-	bool "Support a320evb"
-	select CPU_ARM920T
-
 config ARCH_AT91
 	bool "Atmel AT91"
 
@@ -770,7 +766,6 @@ source "board/denx/m28evk/Kconfig"
 source "board/denx/m53evk/Kconfig"
 source "board/embest/mx6boards/Kconfig"
 source "board/esg/ima3-mx53/Kconfig"
-source "board/faraday/a320evb/Kconfig"
 source "board/freescale/ls2085a/Kconfig"
 source "board/freescale/ls1021aqds/Kconfig"
 source "board/freescale/ls1021atwr/Kconfig"
diff --git a/arch/arm/cpu/arm920t/Makefile b/arch/arm/cpu/arm920t/Makefile
index 29a350c9a6..6582938db0 100644
--- a/arch/arm/cpu/arm920t/Makefile
+++ b/arch/arm/cpu/arm920t/Makefile
@@ -10,7 +10,6 @@ extra-y	= start.o
 obj-y	+= cpu.o
 obj-$(CONFIG_USE_IRQ)	+= interrupts.o
 
-obj-$(if $(filter a320,$(SOC)),y) += a320/
 obj-$(CONFIG_EP93XX) += ep93xx/
 obj-$(CONFIG_IMX) += imx/
 obj-$(CONFIG_S3C24X0) += s3c24x0/
diff --git a/arch/arm/cpu/arm920t/a320/Makefile b/arch/arm/cpu/arm920t/a320/Makefile
deleted file mode 100644
index bbdab588c5..0000000000
--- a/arch/arm/cpu/arm920t/a320/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	+= reset.o
-obj-y	+= timer.o
diff --git a/arch/arm/cpu/arm920t/a320/reset.S b/arch/arm/cpu/arm920t/a320/reset.S
deleted file mode 100644
index 81f9dc983f..0000000000
--- a/arch/arm/cpu/arm920t/a320/reset.S
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * (C) Copyright 2009 Faraday Technology
- * Po-Yu Chuang <ratbert@faraday-tech.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-.global reset_cpu
-reset_cpu:
-	b	reset_cpu
diff --git a/arch/arm/cpu/arm920t/a320/timer.c b/arch/arm/cpu/arm920t/a320/timer.c
deleted file mode 100644
index 1ac5b60129..0000000000
--- a/arch/arm/cpu/arm920t/a320/timer.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * (C) Copyright 2009 Faraday Technology
- * Po-Yu Chuang <ratbert@faraday-tech.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <div64.h>
-#include <asm/io.h>
-#include <faraday/ftpmu010.h>
-#include <faraday/fttmr010.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define TIMER_CLOCK	32768
-#define TIMER_LOAD_VAL	0xffffffff
-
-static inline unsigned long long tick_to_time(unsigned long long tick)
-{
-	tick *= CONFIG_SYS_HZ;
-	do_div(tick, gd->arch.timer_rate_hz);
-
-	return tick;
-}
-
-static inline unsigned long long usec_to_tick(unsigned long long usec)
-{
-	usec *= gd->arch.timer_rate_hz;
-	do_div(usec, 1000000);
-
-	return usec;
-}
-
-int timer_init(void)
-{
-	struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
-	unsigned int cr;
-
-	debug("%s()\n", __func__);
-
-	/* disable timers */
-	writel(0, &tmr->cr);
-
-	/* use 32768Hz oscillator for RTC, WDT, TIMER */
-	ftpmu010_32768osc_enable();
-
-	/* setup timer */
-	writel(TIMER_LOAD_VAL, &tmr->timer3_load);
-	writel(TIMER_LOAD_VAL, &tmr->timer3_counter);
-	writel(0, &tmr->timer3_match1);
-	writel(0, &tmr->timer3_match2);
-
-	/* we don't want timer to issue interrupts */
-	writel(FTTMR010_TM3_MATCH1 |
-	       FTTMR010_TM3_MATCH2 |
-	       FTTMR010_TM3_OVERFLOW,
-	       &tmr->interrupt_mask);
-
-	cr = readl(&tmr->cr);
-	cr |= FTTMR010_TM3_CLOCK;	/* use external clock */
-	cr |= FTTMR010_TM3_ENABLE;
-	writel(cr, &tmr->cr);
-
-	gd->arch.timer_rate_hz = TIMER_CLOCK;
-	gd->arch.tbu = gd->arch.tbl = 0;
-
-	return 0;
-}
-
-/*
- * Get the current 64 bit timer tick count
- */
-unsigned long long get_ticks(void)
-{
-	struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
-	ulong now = TIMER_LOAD_VAL - readl(&tmr->timer3_counter);
-
-	/* increment tbu if tbl has rolled over */
-	if (now < gd->arch.tbl)
-		gd->arch.tbu++;
-	gd->arch.tbl = now;
-	return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl;
-}
-
-void __udelay(unsigned long usec)
-{
-	unsigned long long start;
-	ulong tmo;
-
-	start = get_ticks();		/* get current timestamp */
-	tmo = usec_to_tick(usec);	/* convert usecs to ticks */
-	while ((get_ticks() - start) < tmo)
-		;			/* loop till time has passed */
-}
-
-/*
- * get_timer(base) can be used to check for timeouts or
- * to measure elasped time relative to an event:
- *
- * ulong start_time = get_timer(0) sets start_time to the current
- * time value.
- * get_timer(start_time) returns the time elapsed since then.
- *
- * The time is used in CONFIG_SYS_HZ units!
- */
-ulong get_timer(ulong base)
-{
-	return tick_to_time(get_ticks()) - base;
-}
-
-/*
- * Return the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
-	return gd->arch.timer_rate_hz;
-}
diff --git a/arch/arm/include/asm/arch-a320/a320.h b/arch/arm/include/asm/arch-a320/a320.h
deleted file mode 100644
index f2db8e1061..0000000000
--- a/arch/arm/include/asm/arch-a320/a320.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * (C) Copyright 2009 Faraday Technology
- * Po-Yu Chuang <ratbert@faraday-tech.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __A320_H
-#define __A320_H
-
-/*
- * Hardware register bases
- */
-#define CONFIG_FTSMC020_BASE	0x90200000	/* Static Memory Controller */
-#define CONFIG_DEBUG_LED	0x902ffffc	/* Debug LED */
-#define CONFIG_FTSDMC020_BASE	0x90300000	/* SDRAM Controller */
-#define CONFIG_FTMAC100_BASE	0x90900000	/* Ethernet */
-#define CONFIG_FTPMU010_BASE	0x98100000	/* Power Management Unit */
-#define CONFIG_FTTMR010_BASE	0x98400000	/* Timer */
-#define CONFIG_FTRTC010_BASE	0x98600000	/* Real Time Clock*/
-
-#endif	/* __A320_H */