Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq

28 files changed, 956 insertions, 316 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b39bb4f532..5f21b59ba8 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -690,6 +690,28 @@ config TARGET_LS2085A_SIMU
 	select ARM64
 	select ARMV8_MULTIENTRY
 
+config TARGET_LS2085AQDS
+	bool "Support ls2085aqds"
+	select ARM64
+	select ARMV8_MULTIENTRY
+	select SUPPORT_SPL
+	help
+	  Support for Freescale LS2085AQDS platform
+	  The LS2085A Development System (QDS) is a high-performance
+	  development platform that supports the QorIQ LS2085A
+	  Layerscape Architecture processor.
+
+config TARGET_LS2085ARDB
+	bool "Support ls2085ardb"
+	select ARM64
+	select ARMV8_MULTIENTRY
+	select SUPPORT_SPL
+	help
+	  Support for Freescale LS2085ARDB platform.
+	  The LS2085A Reference design board (RDB) is a high-performance
+	  development platform that supports the QorIQ LS2085A
+	  Layerscape Architecture processor.
+
 config TARGET_LS1021AQDS
 	bool "Support ls1021aqds"
 	select CPU_V7
@@ -849,6 +871,8 @@ source "board/denx/m53evk/Kconfig"
 source "board/embest/mx6boards/Kconfig"
 source "board/esg/ima3-mx53/Kconfig"
 source "board/freescale/ls2085a/Kconfig"
+source "board/freescale/ls2085aqds/Kconfig"
+source "board/freescale/ls2085ardb/Kconfig"
 source "board/freescale/ls1021aqds/Kconfig"
 source "board/freescale/ls1021atwr/Kconfig"
 source "board/freescale/mx23evk/Kconfig"
diff --git a/arch/arm/cpu/armv7/ls102xa/clock.c b/arch/arm/cpu/armv7/ls102xa/clock.c
index 8f80c6175f..7a337e1c5b 100644
--- a/arch/arm/cpu/armv7/ls102xa/clock.c
+++ b/arch/arm/cpu/armv7/ls102xa/clock.c
@@ -20,7 +20,7 @@ void get_sys_info(struct sys_info *sys_info)
 {
 	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
 #ifdef CONFIG_FSL_IFC
-	struct fsl_ifc *ifc_regs = (void *)CONFIG_SYS_IFC_ADDR;
+	struct fsl_ifc ifc_regs = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL};
 	u32 ccr;
 #endif
 	struct ccsr_clk *clk = (void *)(CONFIG_SYS_FSL_LS1_CLK_ADDR);
@@ -74,7 +74,7 @@ void get_sys_info(struct sys_info *sys_info)
 	}
 
 #if defined(CONFIG_FSL_IFC)
-	ccr = in_be32(&ifc_regs->ifc_ccr);
+	ccr = in_be32(&ifc_regs.gregs->ifc_ccr);
 	ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1;
 
 	sys_info->freq_localbus = sys_info->freq_systembus / ccr;
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/Makefile b/arch/arm/cpu/armv8/fsl-lsch3/Makefile
index f920eebc56..9f7815bd52 100644
--- a/arch/arm/cpu/armv8/fsl-lsch3/Makefile
+++ b/arch/arm/cpu/armv8/fsl-lsch3/Makefile
@@ -6,6 +6,8 @@
 
 obj-y += cpu.o
 obj-y += lowlevel.o
+obj-y += soc.o
 obj-y += speed.o
+obj-$(CONFIG_SYS_HAS_SERDES) += fsl_lsch3_serdes.o ls2085a_serdes.o
 obj-$(CONFIG_MP) += mp.o
 obj-$(CONFIG_OF_LIBFDT) += fdt.o
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/README b/arch/arm/cpu/armv8/fsl-lsch3/README
index cc47466112..37f07fbb76 100644
--- a/arch/arm/cpu/armv8/fsl-lsch3/README
+++ b/arch/arm/cpu/armv8/fsl-lsch3/README
@@ -8,3 +8,141 @@ Freescale LayerScape with Chassis Generation 3
 
 This architecture supports Freescale ARMv8 SoCs with Chassis generation 3,
 for example LS2085A.
+
+Flash Layout
+============
+
+(1) A typical layout of various images (including Linux and other firmware images)
+   is shown below considering a 32MB NOR flash device present on most
+   pre-silicon platforms (simulator and emulator):
+
+	-------------------------
+	| 	FIT Image	|
+	| (linux + DTB + RFS)	|
+	------------------------- ----> 0x0120_0000
+	| 	Debug Server FW |
+	------------------------- ----> 0x00C0_0000
+	|	AIOP FW 	|
+	------------------------- ----> 0x0070_0000
+	|	MC FW 		|
+	------------------------- ----> 0x006C_0000
+	| 	MC DPL Blob 	|
+	------------------------- ----> 0x0020_0000
+	| 	BootLoader + Env|
+	------------------------- ----> 0x0000_1000
+	|	PBI 		|
+	------------------------- ----> 0x0000_0080
+	|	RCW 		|
+	------------------------- ----> 0x0000_0000
+
+	32-MB NOR flash layout for pre-silicon platforms (simulator and emulator)
+
+(2) A typical layout of various images (including Linux and other firmware images)
+    is shown below considering a 128MB NOR flash device present on QDS and RDB
+    boards:
+	----------------------------------------- ----> 0x5_8800_0000 ---
+	|	.. Unused .. (7M)		|			|
+	----------------------------------------- ----> 0x5_8790_0000	|
+	| FIT Image (linux + DTB + RFS)	(40M)	|			|
+	----------------------------------------- ----> 0x5_8510_0000	|
+	|	PHY firmware (2M)	 	|			|
+	----------------------------------------- ----> 0x5_84F0_0000	| 64K
+	|	Debug Server FW (2M)		|			| Alt
+	----------------------------------------- ----> 0x5_84D0_0000	| Bank
+	|	AIOP FW (4M)			|			|
+	----------------------------------------- ----> 0x5_8490_0000 (vbank4)
+	|	MC DPC Blob (1M) 		|			|
+	----------------------------------------- ----> 0x5_8480_0000	|
+	|	MC DPL Blob (1M)		|			|
+	----------------------------------------- ----> 0x5_8470_0000	|
+	| 	MC FW (4M)			|			|
+	----------------------------------------- ----> 0x5_8430_0000	|
+	|	BootLoader Environment (1M) 	|			|
+	----------------------------------------- ----> 0x5_8420_0000	|
+	|	BootLoader (1M)			|			|
+	----------------------------------------- ----> 0x5_8410_0000	|
+	|	RCW and PBI (1M) 		|			|
+	----------------------------------------- ----> 0x5_8400_0000 ---
+	|	.. Unused .. (7M)		|			|
+	----------------------------------------- ----> 0x5_8390_0000	|
+	| FIT Image (linux + DTB + RFS)	(40M)	|			|
+	----------------------------------------- ----> 0x5_8110_0000	|
+	|	PHY firmware (2M)	 	|			|
+	----------------------------------------- ----> 0x5_80F0_0000	| 64K
+	|	Debug Server FW (2M)		|			| Bank
+	----------------------------------------- ----> 0x5_80D0_0000	|
+	|	AIOP FW (4M)			|			|
+	----------------------------------------- ----> 0x5_8090_0000 (vbank0)
+	|	MC DPC Blob (1M) 		|			|
+	----------------------------------------- ----> 0x5_8080_0000	|
+	|	MC DPL Blob (1M)		|			|
+	----------------------------------------- ----> 0x5_8070_0000	|
+	| 	MC FW (4M)			|			|
+	----------------------------------------- ----> 0x5_8030_0000	|
+	|	BootLoader Environment (1M) 	|			|
+	----------------------------------------- ----> 0x5_8020_0000	|
+	|	BootLoader (1M)			|			|
+	----------------------------------------- ----> 0x5_8010_0000	|
+	|	RCW and PBI (1M) 		|			|
+	----------------------------------------- ----> 0x5_8000_0000 ---
+
+	128-MB NOR flash layout for QDS and RDB boards
+
+Environment Variables
+=====================
+mcboottimeout:	MC boot timeout in milliseconds. If this variable is not defined
+		the value CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS will be assumed.
+
+mcmemsize:	MC DRAM block size. If this variable is not defined, the value
+		CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE will be assumed.
+
+Booting from NAND
+-------------------
+Booting from NAND requires two images, RCW and u-boot-with-spl.bin.
+The difference between NAND boot RCW image and NOR boot image is the PBI
+command sequence. Below is one example for PBI commands for QDS which uses
+NAND device with 2KB/page, block size 128KB.
+
+1) CCSR 4-byte write to 0x00e00404, data=0x00000000
+2) CCSR 4-byte write to 0x00e00400, data=0x1800a000
+The above two commands set bootloc register to 0x00000000_1800a000 where
+the u-boot code will be running in OCRAM.
+
+3) Block Copy: SRC=0x0107, SRC_ADDR=0x00020000, DEST_ADDR=0x1800a000,
+BLOCK_SIZE=0x00014000
+This command copies u-boot image from NAND device into OCRAM. The values need
+to adjust accordingly.
+
+SRC		should match the cfg_rcw_src, the reset config pins. It depends
+		on the NAND device. See reference manual for cfg_rcw_src.
+SRC_ADDR	is the offset of u-boot-with-spl.bin image in NAND device. In
+		the example above, 128KB. For easy maintenance, we put it at
+		the beginning of next block from RCW.
+DEST_ADDR	is fixed at 0x1800a000, matching bootloc set above.
+BLOCK_SIZE	is the size to be copied by PBI.
+
+RCW image should be written to the beginning of NAND device. Example of using
+u-boot command
+
+nand write <rcw image in memory> 0 <size of rcw image>
+
+To form the NAND image, build u-boot with NAND config, for example,
+ls2085aqds_nand_defconfig. The image needed is u-boot-with-spl.bin.
+The u-boot image should be written to match SRC_ADDR, in above example 0x20000.
+
+nand write <u-boot image in memory> 200000 <size of u-boot image>
+
+With these two images in NAND device, the board can boot from NAND.
+
+Another example for RDB boards,
+
+1) CCSR 4-byte write to 0x00e00404, data=0x00000000
+2) CCSR 4-byte write to 0x00e00400, data=0x1800a000
+3) Block Copy: SRC=0x0119, SRC_ADDR=0x00080000, DEST_ADDR=0x1800a000,
+BLOCK_SIZE=0x00014000
+
+nand write <rcw image in memory> 0 <size of rcw image>
+nand write <u-boot image in memory> 80000 <size of u-boot image>
+
+Notice the difference from QDS is SRC, SRC_ADDR and the offset of u-boot image
+to match board NAND device with 4KB/page, block size 512KB.
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/cpu.c b/arch/arm/cpu/armv8/fsl-lsch3/cpu.c
index 49974878b9..67145778b9 100644
--- a/arch/arm/cpu/armv8/fsl-lsch3/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-lsch3/cpu.c
@@ -10,7 +10,12 @@
 #include <asm/armv8/mmu.h>
 #include <asm/io.h>
 #include <asm/arch-fsl-lsch3/immap_lsch3.h>
+#include <fsl_debug_server.h>
 #include <fsl-mc/fsl_mc.h>
+#include <asm/arch/fsl_serdes.h>
+#ifdef CONFIG_FSL_ESDHC
+#include <fsl_esdhc.h>
+#endif
 #include "cpu.h"
 #include "mp.h"
 #include "speed.h"
@@ -24,8 +29,9 @@ DECLARE_GLOBAL_DATA_PTR;
  * levels of translation tables here to cover 40-bit address space.
  * We use 4KB granule size, with 40 bits physical address, T0SZ=24
  * Level 0 IA[39], table address @0
- * Level 1 IA[31:30], table address @01000, 0x2000
- * Level 2 IA[29:21], table address @0x3000
+ * Level 1 IA[31:30], table address @0x1000, 0x2000
+ * Level 2 IA[29:21], table address @0x3000, 0x4000
+ * Address above 0x5000 is free for other purpose.
  */
 
 #define SECTION_SHIFT_L0	39UL
@@ -60,12 +66,12 @@ static inline void early_mmu_setup(void)
 {
 	int el;
 	u64 i;
-	u64 section_l1t0, section_l1t1, section_l2;
+	u64 section_l1t0, section_l1t1, section_l2t0, section_l2t1;
 	u64 *level0_table = (u64 *)CONFIG_SYS_FSL_OCRAM_BASE;
 	u64 *level1_table_0 = (u64 *)(CONFIG_SYS_FSL_OCRAM_BASE + 0x1000);
 	u64 *level1_table_1 = (u64 *)(CONFIG_SYS_FSL_OCRAM_BASE + 0x2000);
-	u64 *level2_table = (u64 *)(CONFIG_SYS_FSL_OCRAM_BASE + 0x3000);
-
+	u64 *level2_table_0 = (u64 *)(CONFIG_SYS_FSL_OCRAM_BASE + 0x3000);
+	u64 *level2_table_1 = (u64 *)(CONFIG_SYS_FSL_OCRAM_BASE + 0x4000);
 
 	level0_table[0] =
 		(u64)level1_table_0 | PMD_TYPE_TABLE;
@@ -79,21 +85,25 @@ static inline void early_mmu_setup(void)
 	 */
 	section_l1t0 = 0;
 	section_l1t1 = BLOCK_SIZE_L0;
-	section_l2 = 0;
+	section_l2t0 = 0;
+	section_l2t1 = CONFIG_SYS_FLASH_BASE;
 	for (i = 0; i < 512; i++) {
 		set_pgtable_section(level1_table_0, i, section_l1t0,
 				    MT_DEVICE_NGNRNE);
 		set_pgtable_section(level1_table_1, i, section_l1t1,
 				    MT_NORMAL);
-		set_pgtable_section(level2_table, i, section_l2,
+		set_pgtable_section(level2_table_0, i, section_l2t0,
+				    MT_DEVICE_NGNRNE);
+		set_pgtable_section(level2_table_1, i, section_l2t1,
 				    MT_DEVICE_NGNRNE);
 		section_l1t0 += BLOCK_SIZE_L1;
 		section_l1t1 += BLOCK_SIZE_L1;
-		section_l2 += BLOCK_SIZE_L2;
+		section_l2t0 += BLOCK_SIZE_L2;
+		section_l2t1 += BLOCK_SIZE_L2;
 	}
 
 	level1_table_0[0] =
-		(u64)level2_table | PMD_TYPE_TABLE;
+		(u64)level2_table_0 | PMD_TYPE_TABLE;
 	level1_table_0[1] =
 		0x40000000 | PMD_SECT_AF | PMD_TYPE_SECT |
 		PMD_ATTRINDX(MT_DEVICE_NGNRNE);
@@ -104,17 +114,34 @@ static inline void early_mmu_setup(void)
 		0xc0000000 | PMD_SECT_AF | PMD_TYPE_SECT |
 		PMD_ATTRINDX(MT_NORMAL);
 
-	/* Rewrite table to enable cache */
-	set_pgtable_section(level2_table,
+	/* Rewerite table to enable cache for OCRAM */
+	set_pgtable_section(level2_table_0,
 			    CONFIG_SYS_FSL_OCRAM_BASE >> SECTION_SHIFT_L2,
 			    CONFIG_SYS_FSL_OCRAM_BASE,
 			    MT_NORMAL);
-	for (i = CONFIG_SYS_IFC_BASE >> SECTION_SHIFT_L2;
-	     i < (CONFIG_SYS_IFC_BASE + CONFIG_SYS_IFC_SIZE)
-	     >> SECTION_SHIFT_L2; i++) {
-		section_l2 = i << SECTION_SHIFT_L2;
-		set_pgtable_section(level2_table, i,
-				    section_l2, MT_NORMAL);
+
+#if defined(CONFIG_SYS_NOR0_CSPR_EARLY) && defined(CONFIG_SYS_NOR_AMASK_EARLY)
+	/* Rewrite table to enable cache for two entries (4MB) */
+	section_l2t1 = CONFIG_SYS_IFC_BASE;
+	set_pgtable_section(level2_table_0,
+			    section_l2t1 >> SECTION_SHIFT_L2,
+			    section_l2t1,
+			    MT_NORMAL);
+	section_l2t1 += BLOCK_SIZE_L2;
+	set_pgtable_section(level2_table_0,
+			    section_l2t1 >> SECTION_SHIFT_L2,
+			    section_l2t1,
+			    MT_NORMAL);
+#endif
+
+	/* Create a mapping for 256MB IFC region to final flash location */
+	level1_table_0[CONFIG_SYS_FLASH_BASE >> SECTION_SHIFT_L1] =
+		(u64)level2_table_1 | PMD_TYPE_TABLE;
+	section_l2t1 = CONFIG_SYS_IFC_BASE;
+	for (i = 0; i < 0x10000000 >> SECTION_SHIFT_L2; i++) {
+		set_pgtable_section(level2_table_1, i,
+				    section_l2t1, MT_DEVICE_NGNRNE);
+		section_l2t1 += BLOCK_SIZE_L2;
 	}
 
 	el = current_el();
@@ -347,6 +374,7 @@ u32 fsl_qoriq_core_to_type(unsigned int core)
 #ifdef CONFIG_DISPLAY_CPUINFO
 int print_cpuinfo(void)
 {
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
 	struct sys_info sysinfo;
 	char buf[32];
 	unsigned int i, core;
@@ -370,21 +398,40 @@ int print_cpuinfo(void)
 	printf("     DP-DDR:   %-4s MHz", strmhz(buf, sysinfo.freq_ddrbus2));
 	puts("\n");
 
+	/* Display the RCW, so that no one gets confused as to what RCW
+	 * we're actually using for this boot.
+	 */
+	puts("Reset Configuration Word (RCW):");
+	for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
+		u32 rcw = in_le32(&gur->rcwsr[i]);
+
+		if ((i % 4) == 0)
+			printf("\n       %02x:", i * 4);
+		printf(" %08x", rcw);
+	}
+	puts("\n");
+
 	return 0;
 }
 #endif
 
+#ifdef CONFIG_FSL_ESDHC
+int cpu_mmc_init(bd_t *bis)
+{
+	return fsl_esdhc_mmc_init(bis);
+}
+#endif
+
 int cpu_eth_init(bd_t *bis)
 {
 	int error = 0;
 
 #ifdef CONFIG_FSL_MC_ENET
-	error = mc_init(bis);
+	error = fsl_mc_ldpaa_init(bis);
 #endif
 	return error;
 }
 
-
 int arch_early_init_r(void)
 {
 	int rv;
@@ -393,5 +440,43 @@ int arch_early_init_r(void)
 	if (rv)
 		printf("Did not wake secondary cores\n");
 
+#ifdef CONFIG_SYS_HAS_SERDES
+	fsl_serdes_init();
+#endif
+	return 0;
+}
+
+int timer_init(void)
+{
+	u32 __iomem *cntcr = (u32 *)CONFIG_SYS_FSL_TIMER_ADDR;
+	u32 __iomem *cltbenr = (u32 *)CONFIG_SYS_FSL_PMU_CLTBENR;
+#ifdef COUNTER_FREQUENCY_REAL
+	unsigned long cntfrq = COUNTER_FREQUENCY_REAL;
+
+	/* Update with accurate clock frequency */
+	asm volatile("msr cntfrq_el0, %0" : : "r" (cntfrq) : "memory");
+#endif
+
+	/* Enable timebase for all clusters.
+	 * It is safe to do so even some clusters are not enabled.
+	 */
+	out_le32(cltbenr, 0xf);
+
+	/* Enable clock for timer
+	 * This is a global setting.
+	 */
+	out_le32(cntcr, 0x1);
+
 	return 0;
 }
+
+void reset_cpu(ulong addr)
+{
+	u32 __iomem *rstcr = (u32 *)CONFIG_SYS_FSL_RST_ADDR;
+	u32 val;
+
+	/* Raise RESET_REQ_B */
+	val = in_le32(rstcr);
+	val |= 0x02;
+	out_le32(rstcr, val);
+}
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/fdt.c b/arch/arm/cpu/armv8/fsl-lsch3/fdt.c
index 7eb9b6aa4b..d37002333c 100644
--- a/arch/arm/cpu/armv8/fsl-lsch3/fdt.c
+++ b/arch/arm/cpu/armv8/fsl-lsch3/fdt.c
@@ -7,6 +7,9 @@
 #include <common.h>
 #include <libfdt.h>
 #include <fdt_support.h>
+#ifdef CONFIG_FSL_ESDHC
+#include <fsl_esdhc.h>
+#endif
 #include "mp.h"
 
 #ifdef CONFIG_MP
@@ -62,7 +65,11 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 #endif
 
 #ifdef CONFIG_SYS_NS16550
-	do_fixup_by_compat_u32(blob, "ns16550",
+	do_fixup_by_compat_u32(blob, "fsl,ns16550",
 			       "clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
 #endif
+
+#if defined(CONFIG_FSL_ESDHC)
+	fdt_fixup_esdhc(blob, bd);
+#endif
 }
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/fsl_lsch3_serdes.c b/arch/arm/cpu/armv8/fsl-lsch3/fsl_lsch3_serdes.c
new file mode 100644
index 0000000000..02ca126ab8
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-lsch3/fsl_lsch3_serdes.c
@@ -0,0 +1,115 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch-fsl-lsch3/immap_lsch3.h>
+#include <fsl-mc/ldpaa_wriop.h>
+
+#ifdef CONFIG_SYS_FSL_SRDS_1
+static u8 serdes1_prtcl_map[SERDES_PRCTL_COUNT];
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+static u8 serdes2_prtcl_map[SERDES_PRCTL_COUNT];
+#endif
+
+int is_serdes_configured(enum srds_prtcl device)
+{
+	int ret = 0;
+
+#ifdef CONFIG_SYS_FSL_SRDS_1
+	ret |= serdes1_prtcl_map[device];
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	ret |= serdes2_prtcl_map[device];
+#endif
+
+	return !!ret;
+}
+
+int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	u32 cfg = in_le32(&gur->rcwsr[28]);
+	int i;
+
+	switch (sd) {
+#ifdef CONFIG_SYS_FSL_SRDS_1
+	case FSL_SRDS_1:
+		cfg &= FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK;
+		cfg >>= FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT;
+		break;
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	case FSL_SRDS_2:
+		cfg &= FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK;
+		cfg >>= FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT;
+		break;
+#endif
+	default:
+		printf("invalid SerDes%d\n", sd);
+		break;
+	}
+	/* Is serdes enabled at all? */
+	if (cfg == 0)
+		return -ENODEV;
+
+	for (i = 0; i < SRDS_MAX_LANES; i++) {
+		if (serdes_get_prtcl(sd, cfg, i) == device)
+			return i;
+	}
+
+	return -ENODEV;
+}
+
+void serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift,
+		u8 serdes_prtcl_map[SERDES_PRCTL_COUNT])
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	u32 cfg;
+	int lane;
+
+	memset(serdes_prtcl_map, 0, sizeof(serdes_prtcl_map));
+
+	cfg = in_le32(&gur->rcwsr[28]) & sd_prctl_mask;
+	cfg >>= sd_prctl_shift;
+	printf("Using SERDES%d Protocol: %d (0x%x)\n", sd + 1, cfg, cfg);
+
+	if (!is_serdes_prtcl_valid(sd, cfg))
+		printf("SERDES%d[PRTCL] = 0x%x is not valid\n", sd + 1, cfg);
+
+	for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
+		enum srds_prtcl lane_prtcl = serdes_get_prtcl(sd, cfg, lane);
+		if (unlikely(lane_prtcl >= SERDES_PRCTL_COUNT))
+			debug("Unknown SerDes lane protocol %d\n", lane_prtcl);
+		else {
+			serdes_prtcl_map[lane_prtcl] = 1;
+#ifdef CONFIG_FSL_MC_ENET
+			wriop_init_dpmac(sd, lane + 1, (int)lane_prtcl);
+#endif
+		}
+	}
+}
+
+void fsl_serdes_init(void)
+{
+#ifdef CONFIG_SYS_FSL_SRDS_1
+	serdes_init(FSL_SRDS_1,
+		    CONFIG_SYS_FSL_LSCH3_SERDES_ADDR,
+		    FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK,
+		    FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT,
+		    serdes1_prtcl_map);
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	serdes_init(FSL_SRDS_2,
+		    CONFIG_SYS_FSL_LSCH3_SERDES_ADDR + FSL_SRDS_2 * 0x10000,
+		    FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK,
+		    FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT,
+		    serdes2_prtcl_map);
+#endif
+}
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S b/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S
index 886576ef99..018c61742e 100644
--- a/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S
+++ b/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S
@@ -15,6 +15,15 @@
 ENTRY(lowlevel_init)
 	mov	x29, lr			/* Save LR */
 
+	/* Add fully-coherent masters to DVM domain */
+	ldr	x1, =CCI_MN_BASE
+	ldr	x2, [x1, #CCI_MN_RNF_NODEID_LIST]
+	str	x2, [x1, #CCI_MN_DVM_DOMAIN_CTL_SET]
+1:	ldr	x3, [x1, #CCI_MN_DVM_DOMAIN_CTL_SET]
+	mvn	x0, x3
+	tst	x0, x3		/* Wait for domain addition to complete */
+	b.ne	1b
+
 	/* Set the SMMU page size in the sACR register */
 	ldr	x1, =SMMU_BASE
 	ldr	w0, [x1, #0x10]
@@ -224,6 +233,9 @@ ENTRY(secondary_boot_func)
 	/* physical address of this cpus spin table element */
 	add	x11, x1, x0
 
+	ldr	x0, =__real_cntfrq
+	ldr	x0, [x0]
+	msr	cntfrq_el0, x0	/* set with real frequency */
 	str	x9, [x11, #16]	/* LPID */
 	mov	x4, #1
 	str	x4, [x11, #8]	/* STATUS */
@@ -275,6 +287,9 @@ ENDPROC(secondary_switch_to_el1)
 
 	/* 64 bit alignment for elements accessed as data */
 	.align 4
+	.global __real_cntfrq
+__real_cntfrq:
+	.quad COUNTER_FREQUENCY
 	.globl __secondary_boot_code_size
 	.type __secondary_boot_code_size, %object
 	/* Secondary Boot Code ends here */
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/ls2085a_serdes.c b/arch/arm/cpu/armv8/fsl-lsch3/ls2085a_serdes.c
new file mode 100644
index 0000000000..098745bd74
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-lsch3/ls2085a_serdes.c
@@ -0,0 +1,117 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch-fsl-lsch3/immap_lsch3.h>
+
+struct serdes_config {
+	u8 protocol;
+	u8 lanes[SRDS_MAX_LANES];
+};
+
+static struct serdes_config serdes1_cfg_tbl[] = {
+	/* SerDes 1 */
+	{0x03, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2 } },
+	{0x05, {PCIE2, PCIE2, PCIE2, PCIE2, SGMII4, SGMII3, SGMII2, SGMII1 } },
+	{0x07, {SGMII8, SGMII7, SGMII6, SGMII5, SGMII4, SGMII3, SGMII2,
+		SGMII1 } },
+	{0x09, {SGMII8, SGMII7, SGMII6, SGMII5, SGMII4, SGMII3, SGMII2,
+		SGMII1 } },
+	{0x0A, {SGMII8, SGMII7, SGMII6, SGMII5, SGMII4, SGMII3, SGMII2,
+		SGMII1 } },
+	{0x0C, {SGMII8, SGMII7, SGMII6, SGMII5, SGMII4, SGMII3, SGMII2,
+		SGMII1 } },
+	{0x0E, {SGMII8, SGMII7, SGMII6, SGMII5, SGMII4, SGMII3, SGMII2,
+		SGMII1 } },
+	{0x26, {SGMII8, SGMII7, SGMII6, SGMII5, SGMII4, SGMII3, XFI2, XFI1 } },
+	{0x28, {SGMII8, SGMII7, SGMII6, SGMII5, XFI4, XFI3, XFI2, XFI1 } },
+	{0x2A, {XFI8, XFI7, XFI6, XFI5, XFI4, XFI3, XFI2, XFI1 } },
+	{0x2B, {SGMII8, SGMII7, SGMII6, SGMII5, XAUI1, XAUI1, XAUI1, XAUI1  } },
+	{0x32, {XAUI2, XAUI2, XAUI2, XAUI2, XAUI1, XAUI1, XAUI1, XAUI1  } },
+	{0x33, {PCIE2, PCIE2, PCIE2, PCIE2, QSGMII_D, QSGMII_C, QSGMII_B,
+		QSGMII_A} },
+	{0x35, {QSGMII_D, QSGMII_C, QSGMII_B, PCIE2, XFI4, XFI3, XFI2, XFI1 } },
+		{}
+};
+static struct serdes_config serdes2_cfg_tbl[] = {
+	/* SerDes 2 */
+	{0x07, {SGMII9, SGMII10, SGMII11, SGMII12, SGMII13, SGMII14, SGMII15,
+		SGMII16 } },
+	{0x09, {SGMII9, SGMII10, SGMII11, SGMII12, SGMII13, SGMII14, SGMII15,
+		SGMII16 } },
+	{0x0A, {SGMII9, SGMII10, SGMII11, SGMII12, SGMII13, SGMII14, SGMII15,
+		SGMII16 } },
+	{0x0C, {SGMII9, SGMII10, SGMII11, SGMII12, SGMII13, SGMII14, SGMII15,
+		SGMII16 } },
+	{0x0E, {SGMII9, SGMII10, SGMII11, SGMII12, SGMII13, SGMII14, SGMII15,
+		SGMII16 } },
+	{0x3D, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3 } },
+	{0x3E, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3 } },
+	{0x3F, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4 } },
+	{0x40, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4 } },
+	{0x41, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SATA1, SATA2 } },
+	{0x42, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SATA1, SATA2 } },
+	{0x43, {PCIE3, PCIE3, PCIE3, PCIE3, NONE, NONE, SATA1, SATA2 } },
+	{0x44, {PCIE3, PCIE3, PCIE3, PCIE3, NONE, NONE, SATA1, SATA2 } },
+	{0x45, {PCIE3, SGMII10, SGMII11, SGMII12, PCIE4, SGMII14, SGMII15,
+		SGMII16 } },
+	{0x47, {SGMII9, SGMII10, SGMII11, SGMII12, PCIE4, PCIE4, PCIE4,
+		PCIE4 } },
+	{0x49, {SGMII9, SGMII10, SGMII11, SGMII12, PCIE4, PCIE4, SATA1,
+		SATA2 } },
+	{0x4A, {SGMII9, SGMII10, SGMII11, SGMII12, PCIE4, PCIE4, SATA1,
+		SATA2 } },
+	{}
+};
+
+static struct serdes_config *serdes_cfg_tbl[] = {
+	serdes1_cfg_tbl,
+	serdes2_cfg_tbl,
+};
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+	struct serdes_config *ptr;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+	while (ptr->protocol) {
+		if (ptr->protocol == cfg)
+			return ptr->lanes[lane];
+		ptr++;
+	}
+
+	return 0;
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+	int i;
+	struct serdes_config *ptr;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+	while (ptr->protocol) {
+		if (ptr->protocol == prtcl)
+			break;
+		ptr++;
+	}
+
+	if (!ptr->protocol)
+		return 0;
+
+	for (i = 0; i < SRDS_MAX_LANES; i++) {
+		if (ptr->lanes[i] != NONE)
+			return 1;
+	}
+
+	return 0;
+}
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/mp.c b/arch/arm/cpu/armv8/fsl-lsch3/mp.c
index ce9c0c1bdb..da7853a5af 100644
--- a/arch/arm/cpu/armv8/fsl-lsch3/mp.c
+++ b/arch/arm/cpu/armv8/fsl-lsch3/mp.c
@@ -31,6 +31,13 @@ int fsl_lsch3_wake_seconday_cores(void)
 	int i, timeout = 10;
 	u64 *table = get_spin_tbl_addr();
 
+#ifdef COUNTER_FREQUENCY_REAL
+	/* update for secondary cores */
+	__real_cntfrq = COUNTER_FREQUENCY_REAL;
+	flush_dcache_range((unsigned long)&__real_cntfrq,
+			   (unsigned long)&__real_cntfrq + 8);
+#endif
+
 	cores = cpu_mask();
 	/* Clear spin table so that secondary processors
 	 * observe the correct value after waking up from wfe.
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/mp.h b/arch/arm/cpu/armv8/fsl-lsch3/mp.h
index 66144d6101..c985d6a6ba 100644
--- a/arch/arm/cpu/armv8/fsl-lsch3/mp.h
+++ b/arch/arm/cpu/armv8/fsl-lsch3/mp.h
@@ -26,6 +26,7 @@
 #define id_to_core(x)	((x & 3) | (x >> 6))
 #ifndef __ASSEMBLY__
 extern u64 __spin_table[];
+extern u64 __real_cntfrq;
 extern u64 *secondary_boot_code;
 extern size_t __secondary_boot_code_size;
 int fsl_lsch3_wake_seconday_cores(void);
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/soc.c b/arch/arm/cpu/armv8/fsl-lsch3/soc.c
new file mode 100644
index 0000000000..2538001bca
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-lsch3/soc.c
@@ -0,0 +1,107 @@
+/*
+ * Copyright 2015 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <fsl_ifc.h>
+#include <nand.h>
+#include <spl.h>
+#include <asm/arch-fsl-lsch3/soc.h>
+#include <asm/io.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void erratum_a008751(void)
+{
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008751
+	u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE;
+
+	writel(0x27672b2a, scfg + SCFG_USB3PRM1CR / 4);
+#endif
+}
+
+static void erratum_rcw_src(void)
+{
+#if defined(CONFIG_SPL)
+	u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE;
+	u32 __iomem *dcfg_dcsr = (u32 __iomem *)DCFG_DCSR_BASE;
+	u32 val;
+
+	val = in_le32(dcfg_ccsr + DCFG_PORSR1 / 4);
+	val &= ~DCFG_PORSR1_RCW_SRC;
+	val |= DCFG_PORSR1_RCW_SRC_NOR;
+	out_le32(dcfg_dcsr + DCFG_DCSR_PORCR1 / 4, val);
+#endif
+}
+
+#define I2C_DEBUG_REG 0x6
+#define I2C_GLITCH_EN 0x8
+/*
+ * This erratum requires setting glitch_en bit to enable
+ * digital glitch filter to improve clock stability.
+ */
+static void erratum_a009203(void)
+{
+	u8 __iomem *ptr;
+#ifdef CONFIG_SYS_I2C
+#ifdef I2C1_BASE_ADDR
+	ptr = (u8 __iomem *)(I2C1_BASE_ADDR + I2C_DEBUG_REG);
+
+	writeb(I2C_GLITCH_EN, ptr);
+#endif
+#ifdef I2C2_BASE_ADDR
+	ptr = (u8 __iomem *)(I2C2_BASE_ADDR + I2C_DEBUG_REG);
+
+	writeb(I2C_GLITCH_EN, ptr);
+#endif
+#ifdef I2C3_BASE_ADDR
+	ptr = (u8 __iomem *)(I2C3_BASE_ADDR + I2C_DEBUG_REG);
+
+	writeb(I2C_GLITCH_EN, ptr);
+#endif
+#ifdef I2C4_BASE_ADDR
+	ptr = (u8 __iomem *)(I2C4_BASE_ADDR + I2C_DEBUG_REG);
+
+	writeb(I2C_GLITCH_EN, ptr);
+#endif
+#endif
+}
+
+void fsl_lsch3_early_init_f(void)
+{
+	erratum_a008751();
+	erratum_rcw_src();
+	init_early_memctl_regs();	/* tighten IFC timing */
+	erratum_a009203();
+}
+
+#ifdef CONFIG_SPL_BUILD
+void board_init_f(ulong dummy)
+{
+	/* Clear global data */
+	memset((void *)gd, 0, sizeof(gd_t));
+
+	arch_cpu_init();
+	board_early_init_f();
+	timer_init();
+	env_init();
+	gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE);
+
+	serial_init();
+	console_init_f();
+	dram_init();
+
+	/* Clear the BSS. */
+	memset(__bss_start, 0, __bss_end - __bss_start);
+
+	board_init_r(NULL, 0);
+}
+
+u32 spl_boot_device(void)
+{
+	return BOOT_DEVICE_NAND;
+}
+#endif
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/speed.c b/arch/arm/cpu/armv8/fsl-lsch3/speed.c
index 72cd999c5f..cac4f925a4 100644
--- a/arch/arm/cpu/armv8/fsl-lsch3/speed.c
+++ b/arch/arm/cpu/armv8/fsl-lsch3/speed.c
@@ -26,7 +26,7 @@ void get_sys_info(struct sys_info *sys_info)
 {
 	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
 #ifdef CONFIG_FSL_IFC
-	struct fsl_ifc *ifc_regs = (void *)CONFIG_SYS_IFC_ADDR;
+	struct fsl_ifc ifc_regs = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL};
 	u32 ccr;
 #endif
 	struct ccsr_clk_cluster_group __iomem *clk_grp[2] = {
@@ -86,6 +86,8 @@ void get_sys_info(struct sys_info *sys_info)
 	sys_info->freq_systembus *= (in_le32(&gur->rcwsr[0]) >>
 			FSL_CHASSIS3_RCWSR0_SYS_PLL_RAT_SHIFT) &
 			FSL_CHASSIS3_RCWSR0_SYS_PLL_RAT_MASK;
+	/* Platform clock is half of platform PLL */
+	sys_info->freq_systembus /= 2;
 	sys_info->freq_ddrbus *= (in_le32(&gur->rcwsr[0]) >>
 			FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_SHIFT) &
 			FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_MASK;
@@ -102,10 +104,7 @@ void get_sys_info(struct sys_info *sys_info)
 			 offsetof(struct ccsr_clk_cluster_group,
 				  pllngsr[i%3].gsr));
 		ratio[i] = (in_le32(offset) >> 1) & 0x3f;
-		if (ratio[i] > 4)
-			freq_c_pll[i] = sysclk * ratio[i];
-		else
-			freq_c_pll[i] = sys_info->freq_systembus * ratio[i];
+		freq_c_pll[i] = sysclk * ratio[i];
 	}
 
 	for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) {
@@ -119,7 +118,7 @@ void get_sys_info(struct sys_info *sys_info)
 	}
 
 #if defined(CONFIG_FSL_IFC)
-	ccr = in_le32(&ifc_regs->ifc_ccr);
+	ccr = in_le32(&ifc_regs.gregs->ifc_ccr);
 	ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1;
 
 	sys_info->freq_localbus = sys_info->freq_systembus / ccr;
diff --git a/arch/arm/cpu/armv8/generic_timer.c b/arch/arm/cpu/armv8/generic_timer.c
index 223b95e210..8e60baebc5 100644
--- a/arch/arm/cpu/armv8/generic_timer.c
+++ b/arch/arm/cpu/armv8/generic_timer.c
@@ -25,7 +25,18 @@ unsigned long get_tbclk(void)
 unsigned long timer_read_counter(void)
 {
 	unsigned long cntpct;
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008585
+	/* This erratum number needs to be confirmed to match ARM document */
+	unsigned long temp;
+#endif
 	isb();
 	asm volatile("mrs %0, cntpct_el0" : "=r" (cntpct));
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008585
+	asm volatile("mrs %0, cntpct_el0" : "=r" (temp));
+	while (temp != cntpct) {
+		asm volatile("mrs %0, cntpct_el0" : "=r" (cntpct));
+		asm volatile("mrs %0, cntpct_el0" : "=r" (temp));
+	}
+#endif
 	return cntpct;
 }
diff --git a/arch/arm/cpu/armv8/u-boot-spl.lds b/arch/arm/cpu/armv8/u-boot-spl.lds
new file mode 100644
index 0000000000..4df339c84a
--- /dev/null
+++ b/arch/arm/cpu/armv8/u-boot-spl.lds
@@ -0,0 +1,77 @@
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *	Aneesh V <aneesh@ti.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,
+		LENGTH = CONFIG_SPL_MAX_SIZE }
+MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR,
+		LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
+
+OUTPUT_FORMAT("elf64-littleaarch64", "elf64-littleaarch64", "elf64-littleaarch64")
+OUTPUT_ARCH(aarch64)
+ENTRY(_start)
+SECTIONS
+{
+	.text : {
+		. = ALIGN(8);
+		*(.__image_copy_start)
+		CPUDIR/start.o (.text*)
+		*(.text*)
+	} >.sram
+
+	.rodata : {
+		. = ALIGN(8);
+		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+	} >.sram
+
+	.data : {
+		. = ALIGN(8);
+		*(.data*)
+	} >.sram
+
+	.u_boot_list : {
+		. = ALIGN(8);
+		KEEP(*(SORT(.u_boot_list*)));
+	} >.sram
+
+	.image_copy_end : {
+		. = ALIGN(8);
+		*(.__image_copy_end)
+	} >.sram
+
+	.end : {
+		. = ALIGN(8);
+		*(.__end)
+	} >.sram
+
+	.bss_start : {
+		. = ALIGN(8);
+		KEEP(*(.__bss_start));
+	} >.sdram
+
+	.bss : {
+		*(.bss*)
+		 . = ALIGN(8);
+	} >.sdram
+
+	.bss_end : {
+		KEEP(*(.__bss_end));
+	} >.sdram
+
+	/DISCARD/ : { *(.dynsym) }
+	/DISCARD/ : { *(.dynstr*) }
+	/DISCARD/ : { *(.dynamic*) }
+	/DISCARD/ : { *(.plt*) }
+	/DISCARD/ : { *(.interp*) }
+	/DISCARD/ : { *(.gnu*) }
+}
diff --git a/arch/arm/include/asm/arch-fsl-lsch3/config.h b/arch/arm/include/asm/arch-fsl-lsch3/config.h
index b140c1fac2..ca8d38cf78 100644
--- a/arch/arm/include/asm/arch-fsl-lsch3/config.h
+++ b/arch/arm/include/asm/arch-fsl-lsch3/config.h
@@ -8,6 +8,14 @@
 #define _ASM_ARMV8_FSL_LSCH3_CONFIG_
 
 #include <fsl_ddrc_version.h>
+
+#define CONFIG_SYS_PAGE_SIZE		0x10000
+
+#ifndef L1_CACHE_BYTES
+#define L1_CACHE_SHIFT		6
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+#endif
+
 #define CONFIG_MP
 #define CONFIG_SYS_FSL_OCRAM_BASE	0x18000000	/* initial RAM */
 /* Link Definitions */
@@ -23,6 +31,7 @@
 #define CONFIG_SYS_FSL_CH3_CLK_GRPA_ADDR	(CONFIG_SYS_IMMR + 0x00300000)
 #define CONFIG_SYS_FSL_CH3_CLK_GRPB_ADDR	(CONFIG_SYS_IMMR + 0x00310000)
 #define CONFIG_SYS_FSL_CH3_CLK_CTRL_ADDR	(CONFIG_SYS_IMMR + 0x00370000)
+#define CONFIG_SYS_FSL_ESDHC_ADDR		(CONFIG_SYS_IMMR + 0x01140000)
 #define CONFIG_SYS_IFC_ADDR			(CONFIG_SYS_IMMR + 0x01240000)
 #define CONFIG_SYS_NS16550_COM1			(CONFIG_SYS_IMMR + 0x011C0500)
 #define CONFIG_SYS_NS16550_COM2			(CONFIG_SYS_IMMR + 0x011C0600)
@@ -30,6 +39,20 @@
 #define CONFIG_SYS_FSL_PMU_CLTBENR		(CONFIG_SYS_FSL_PMU_ADDR + \
 						 0x18A0)
 
+#define CONFIG_SYS_FSL_WRIOP1_ADDR		(CONFIG_SYS_IMMR + 0x7B80000)
+#define CONFIG_SYS_FSL_WRIOP1_MDIO1	(CONFIG_SYS_FSL_WRIOP1_ADDR + 0x16000)
+#define CONFIG_SYS_FSL_WRIOP1_MDIO2	(CONFIG_SYS_FSL_WRIOP1_ADDR + 0x17000)
+#define CONFIG_SYS_FSL_LSCH3_SERDES_ADDR	(CONFIG_SYS_IMMR + 0xEA0000)
+
+/* SP (Cortex-A5) related */
+#define CONFIG_SYS_FSL_SP_ADDR			(CONFIG_SYS_IMMR + 0x00F00000)
+#define CONFIG_SYS_FSL_SP_VSG_GIC_ADDR		(CONFIG_SYS_FSL_SP_ADDR)
+#define CONFIG_SYS_FSL_SP_VSG_GIC_VIGR1		(CONFIG_SYS_FSL_SP_ADDR)
+#define CONFIG_SYS_FSL_SP_VSG_GIC_VIGR2		\
+					(CONFIG_SYS_FSL_SP_ADDR + 0x0008)
+#define CONFIG_SYS_FSL_SP_LOOPBACK_DUART	\
+					(CONFIG_SYS_FSL_SP_ADDR + 0x1000)
+
 #define CONFIG_SYS_FSL_DCSR_DDR_ADDR		0x70012c000ULL
 #define CONFIG_SYS_FSL_DCSR_DDR2_ADDR		0x70012d000ULL
 #define CONFIG_SYS_FSL_DCSR_DDR3_ADDR		0x700132000ULL
@@ -88,22 +111,57 @@
 #define CONFIG_MAX_MEM_MAPPED		CONFIG_SYS_LS2_DDR_BLOCK1_SIZE
 #define CONFIG_SYS_FSL_DDR_VER		FSL_DDR_VER_5_0
 
-
+#define CONFIG_SYS_FSL_ESDHC_LE
 /* IFC */
 #define CONFIG_SYS_FSL_IFC_LE
+#define CONFIG_SYS_MEMAC_LITTLE_ENDIAN
+
+/* PCIe */
+#define CONFIG_SYS_PCIE1_ADDR			(CONFIG_SYS_IMMR + 0x2400000)
+#define CONFIG_SYS_PCIE2_ADDR			(CONFIG_SYS_IMMR + 0x2500000)
+#define CONFIG_SYS_PCIE3_ADDR			(CONFIG_SYS_IMMR + 0x2600000)
+#define CONFIG_SYS_PCIE4_ADDR			(CONFIG_SYS_IMMR + 0x2700000)
+#define CONFIG_SYS_PCIE1_PHYS_ADDR		0x1000000000ULL
+#define CONFIG_SYS_PCIE2_PHYS_ADDR		0x1200000000ULL
+#define CONFIG_SYS_PCIE3_PHYS_ADDR		0x1400000000ULL
+#define CONFIG_SYS_PCIE4_PHYS_ADDR		0x1600000000ULL
+
+/* Cache Coherent Interconnect */
+#define CCI_MN_BASE		0x04000000
+#define CCI_MN_RNF_NODEID_LIST		0x180
+#define CCI_MN_DVM_DOMAIN_CTL		0x200
+#define CCI_MN_DVM_DOMAIN_CTL_SET	0x210
+
+/* Device Configuration */
+#define DCFG_BASE		0x01e00000
+#define DCFG_PORSR1			0x000
+#define DCFG_PORSR1_RCW_SRC		0xff800000
+#define DCFG_PORSR1_RCW_SRC_NOR		0x12f00000
+
+#define DCFG_DCSR_BASE		0X700100000ULL
+#define DCFG_DCSR_PORCR1		0x000
+
+/* Supplemental Configuration */
+#define SCFG_BASE		0x01fc0000
+#define SCFG_USB3PRM1CR			0x000
 
 #ifdef CONFIG_LS2085A
 #define CONFIG_MAX_CPUS				16
 #define CONFIG_SYS_FSL_IFC_BANK_COUNT		8
 #define CONFIG_NUM_DDR_CONTROLLERS		3
 #define CONFIG_SYS_FSL_CLUSTER_CLOCKS		{ 1, 1, 4, 4 }
+#define CONFIG_SYS_FSL_SRDS_1
+#define CONFIG_SYS_FSL_SRDS_2
 #else
 #error SoC not defined
 #endif
 
 #ifdef CONFIG_LS2085A
 #define CONFIG_SYS_FSL_ERRATUM_A008336
+#define CONFIG_SYS_FSL_ERRATUM_A008511
 #define CONFIG_SYS_FSL_ERRATUM_A008514
+#define CONFIG_SYS_FSL_ERRATUM_A008585
+#define CONFIG_SYS_FSL_ERRATUM_A008751
 #endif
 
 #endif /* _ASM_ARMV8_FSL_LSCH3_CONFIG_ */
diff --git a/arch/arm/include/asm/arch-fsl-lsch3/fsl_serdes.h b/arch/arm/include/asm/arch-fsl-lsch3/fsl_serdes.h
new file mode 100644
index 0000000000..2810f3f6d9
--- /dev/null
+++ b/arch/arm/include/asm/arch-fsl-lsch3/fsl_serdes.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __FSL_SERDES_H
+#define __FSL_SERDES_H
+
+#include <config.h>
+
+#define	SRDS_MAX_LANES	8
+
+enum srds_prtcl {
+	NONE = 0,
+	PCIE1,
+	PCIE2,
+	PCIE3,
+	PCIE4,
+	SATA1,
+	SATA2,
+	XAUI1,
+	XAUI2,
+	XFI1,
+	XFI2,
+	XFI3,
+	XFI4,
+	XFI5,
+	XFI6,
+	XFI7,
+	XFI8,
+	SGMII1,
+	SGMII2,
+	SGMII3,
+	SGMII4,
+	SGMII5,
+	SGMII6,
+	SGMII7,
+	SGMII8,
+	SGMII9,
+	SGMII10,
+	SGMII11,
+	SGMII12,
+	SGMII13,
+	SGMII14,
+	SGMII15,
+	SGMII16,
+	QSGMII_A, /* A indicates MACs 1-4 */
+	QSGMII_B, /* B indicates MACs 5-8 */
+	QSGMII_C, /* C indicates MACs 9-12 */
+	QSGMII_D, /* D indicates MACs 12-16 */
+	SERDES_PRCTL_COUNT
+};
+
+enum srds {
+	FSL_SRDS_1  = 0,
+	FSL_SRDS_2  = 1,
+};
+
+int is_serdes_configured(enum srds_prtcl device);
+void fsl_serdes_init(void);
+
+int serdes_get_first_lane(u32 sd, enum srds_prtcl device);
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane);
+int is_serdes_prtcl_valid(int serdes, u32 prtcl);
+
+#endif /* __FSL_SERDES_H */
diff --git a/arch/arm/include/asm/arch-fsl-lsch3/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-lsch3/immap_lsch3.h
index dd11ef79c8..d6bee60385 100644
--- a/arch/arm/include/asm/arch-fsl-lsch3/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-lsch3/immap_lsch3.h
@@ -47,6 +47,30 @@ struct ccsr_gur {
 	u32	devdisr5;	/* Device disable control 5 */
 	u32	devdisr6;	/* Device disable control 6 */
 	u32	devdisr7;	/* Device disable control 7 */
+#define FSL_CHASSIS3_DEVDISR2_DPMAC1	0x00000001
+#define FSL_CHASSIS3_DEVDISR2_DPMAC2	0x00000002
+#define FSL_CHASSIS3_DEVDISR2_DPMAC3	0x00000004
+#define FSL_CHASSIS3_DEVDISR2_DPMAC4	0x00000008
+#define FSL_CHASSIS3_DEVDISR2_DPMAC5	0x00000010
+#define FSL_CHASSIS3_DEVDISR2_DPMAC6	0x00000020
+#define FSL_CHASSIS3_DEVDISR2_DPMAC7	0x00000040
+#define FSL_CHASSIS3_DEVDISR2_DPMAC8	0x00000080
+#define FSL_CHASSIS3_DEVDISR2_DPMAC9	0x00000100
+#define FSL_CHASSIS3_DEVDISR2_DPMAC10	0x00000200
+#define FSL_CHASSIS3_DEVDISR2_DPMAC11	0x00000400
+#define FSL_CHASSIS3_DEVDISR2_DPMAC12	0x00000800
+#define FSL_CHASSIS3_DEVDISR2_DPMAC13	0x00001000
+#define FSL_CHASSIS3_DEVDISR2_DPMAC14	0x00002000
+#define FSL_CHASSIS3_DEVDISR2_DPMAC15	0x00004000
+#define FSL_CHASSIS3_DEVDISR2_DPMAC16	0x00008000
+#define FSL_CHASSIS3_DEVDISR2_DPMAC17	0x00010000
+#define FSL_CHASSIS3_DEVDISR2_DPMAC18	0x00020000
+#define FSL_CHASSIS3_DEVDISR2_DPMAC19	0x00040000
+#define FSL_CHASSIS3_DEVDISR2_DPMAC20	0x00080000
+#define FSL_CHASSIS3_DEVDISR2_DPMAC21	0x00100000
+#define FSL_CHASSIS3_DEVDISR2_DPMAC22	0x00200000
+#define FSL_CHASSIS3_DEVDISR2_DPMAC23	0x00400000
+#define FSL_CHASSIS3_DEVDISR2_DPMAC24	0x00800000
 	u8	res_08c[0x90-0x8c];
 	u32	coredisru;	/* uppper portion for support of 64 cores */
 	u32	coredisrl;	/* lower portion for support of 64 cores */
@@ -63,6 +87,11 @@ struct ccsr_gur {
 #define FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_MASK	0x3f
 #define FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_SHIFT	18
 #define FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_MASK	0x3f
+#define	FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK	0x00FF0000
+#define	FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT	16
+#define	FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK	0xFF000000
+#define	FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT	24
+
 	u8	res_180[0x200-0x180];
 	u32	scratchrw[32];	/* Scratch Read/Write */
 	u8	res_280[0x300-0x280];
diff --git a/arch/arm/include/asm/arch-fsl-lsch3/soc.h b/arch/arm/include/asm/arch-fsl-lsch3/soc.h
new file mode 100644
index 0000000000..16b723d600
--- /dev/null
+++ b/arch/arm/include/asm/arch-fsl-lsch3/soc.h
@@ -0,0 +1,8 @@
+/*
+ * Copyright 2015 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+void fsl_lsch3_early_init_f(void);
+
diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
index 6561ce644e..4dc528bc81 100644
--- a/arch/arm/include/asm/arch-ls102xa/config.h
+++ b/arch/arm/include/asm/arch-ls102xa/config.h
@@ -119,10 +119,6 @@
 
 #define DCU_LAYER_MAX_NUM			16
 
-#define QE_MURAM_SIZE          0x6000UL
-#define MAX_QE_RISC            1
-#define QE_NUM_OF_SNUM         28
-
 #define CONFIG_SYS_FSL_SRDS_1
 
 #ifdef CONFIG_LS102XA
diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
index 3a64afce46..a8122c1a67 100644
--- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
+++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
@@ -17,6 +17,9 @@
 #define SOC_VER_LS1021		0x11
 #define SOC_VER_LS1022		0x12
 
+#define SOC_MAJOR_VER_1_0	0x1
+#define SOC_MAJOR_VER_2_0	0x2
+
 #define CCSR_BRR_OFFSET		0xe4
 #define CCSR_SCRATCHRW1_OFFSET	0x200
 
diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h
new file mode 100644
index 0000000000..f097c81a92
--- /dev/null
+++ b/arch/arm/include/asm/fsl_secure_boot.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __FSL_SECURE_BOOT_H
+#define __FSL_SECURE_BOOT_H
+
+#ifdef CONFIG_SECURE_BOOT
+#ifndef CONFIG_FIT_SIGNATURE
+
+#define CONFIG_EXTRA_ENV \
+	"setenv fdt_high 0xcfffffff;"	\
+	"setenv initrd_high 0xcfffffff;"	\
+	"setenv hwconfig \'fsl_ddr:ctlr_intlv=null,bank_intlv=null\';"
+
+/* The address needs to be modified according to NOR memory map */
+#define CONFIG_BOOTSCRIPT_HDR_ADDR	0x600a0000
+
+#include <config_fsl_secboot.h>
+#endif
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/pcie_layerscape.h b/arch/arm/include/asm/pcie_layerscape.h
deleted file mode 100644
index fb08578f10..0000000000
--- a/arch/arm/include/asm/pcie_layerscape.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __PCIE_LAYERSCAPE_H_
-#define __PCIE_LAYERSCAPE_H_
-
-void pci_init_board(void);
-void ft_pcie_setup(void *blob, bd_t *bd);
-
-#endif
diff --git a/arch/arm/lib/crt0_64.S b/arch/arm/lib/crt0_64.S
index 1654011432..bc9c53c308 100644
--- a/arch/arm/lib/crt0_64.S
+++ b/arch/arm/lib/crt0_64.S
@@ -61,7 +61,11 @@ ENTRY(_main)
 /*
  * Set up initial C runtime environment and call board_init_f(0).
  */
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK)
+	ldr	x0, =(CONFIG_SPL_STACK)
+#else
 	ldr	x0, =(CONFIG_SYS_INIT_SP_ADDR)
+#endif
 	sub	x18, x0, #GD_SIZE	/* allocate one GD above SP */
 	bic	x18, x18, #0x7		/* 8-byte alignment for GD */
 zero_gd:
@@ -77,6 +81,7 @@ zero_gd:
 	mov	x0, #0
 	bl	board_init_f
 
+#if !defined(CONFIG_SPL_BUILD)
 /*
  * Set up intermediate environment (new sp and gd) and call
  * relocate_code(addr_moni). Trick here is that we'll return
@@ -119,4 +124,6 @@ clear_loop:
 
 	/* NOTREACHED - board_init_r() does not return */
 
+#endif /* !CONFIG_SPL_BUILD */
+
 ENDPROC(_main)
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
index 5ca9bf5ff9..235a635c22 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
@@ -15,7 +15,7 @@ DECLARE_GLOBAL_DATA_PTR;
 #ifdef CONFIG_A003399_NOR_WORKAROUND
 void setup_ifc(void)
 {
-	struct fsl_ifc *ifc_regs = (void *)CONFIG_SYS_IFC_ADDR;
+	struct fsl_ifc ifc_regs = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL};
 	u32 _mas0, _mas1, _mas2, _mas3, _mas7;
 	phys_addr_t flash_phys = CONFIG_SYS_FLASH_BASE_PHYS;
 
@@ -70,9 +70,9 @@ void setup_ifc(void)
 #endif
 
 	/* Change flash's physical address */
-	ifc_out32(&(ifc_regs->cspr_cs[0].cspr), CONFIG_SYS_CSPR0);
-	ifc_out32(&(ifc_regs->csor_cs[0].csor), CONFIG_SYS_CSOR0);
-	ifc_out32(&(ifc_regs->amask_cs[0].amask), CONFIG_SYS_AMASK0);
+	ifc_out32(&(ifc_regs.gregs->cspr_cs[0].cspr), CONFIG_SYS_CSPR0);
+	ifc_out32(&(ifc_regs.gregs->csor_cs[0].csor), CONFIG_SYS_CSOR0);
+	ifc_out32(&(ifc_regs.gregs->amask_cs[0].amask), CONFIG_SYS_AMASK0);
 
 	return ;
 }
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index e24b857672..321ade24fe 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -28,7 +28,7 @@ void get_sys_info(sys_info_t *sys_info)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 #ifdef CONFIG_FSL_IFC
-	struct fsl_ifc *ifc_regs = (void *)CONFIG_SYS_IFC_ADDR;
+	struct fsl_ifc ifc_regs = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL};
 	u32 ccr;
 #endif
 #ifdef CONFIG_FSL_CORENET
@@ -597,7 +597,7 @@ void get_sys_info(sys_info_t *sys_info)
 #endif
 
 #if defined(CONFIG_FSL_IFC)
-	ccr = ifc_in32(&ifc_regs->ifc_ccr);
+	ccr = ifc_in32(&ifc_regs.gregs->ifc_ccr);
 	ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1;
 
 	sys_info->freq_localbus = sys_info->freq_systembus / ccr;
diff --git a/arch/powerpc/include/asm/fsl_memac.h b/arch/powerpc/include/asm/fsl_memac.h
deleted file mode 100644
index bed2a40bb2..0000000000
--- a/arch/powerpc/include/asm/fsl_memac.h
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- *	Roy Zang <tie-fei.zang@freescale.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __MEMAC_H__
-#define __MEMAC_H__
-
-#include <phy.h>
-
-struct memac {
-	/* memac general control and status registers */
-	u32	res_0[2];
-	u32	command_config;	/* Control and configuration register */
-	u32	mac_addr_0;	/* Lower 32 bits of 48-bit MAC address */
-	u32	mac_addr_1;	/* Upper 16 bits of 48-bit MAC address */
-	u32	maxfrm;		/* Maximum frame length register */
-	u32	res_18[5];
-	u32	hashtable_ctrl;	/* Hash table control register */
-	u32	res_30[4];
-	u32	ievent;		/* Interrupt event register */
-	u32	tx_ipg_length;	/* Transmitter inter-packet-gap register */
-	u32	res_48;
-	u32	imask;		/* interrupt mask register */
-	u32	res_50;
-	u32	cl_pause_quanta[4]; /* CL01-CL67 pause quanta register */
-	u32	cl_pause_thresh[4]; /* CL01-CL67 pause thresh register */
-	u32	rx_pause_status;	/* Receive pause status register */
-	u32	res_78[2];
-	u32	mac_addr[14];	/* MAC address */
-	u32	lpwake_timer;	/* EEE low power wakeup timer register */
-	u32	sleep_timer;	/* Transmit EEE Low Power Timer register */
-	u32	res_c0[8];
-	u32	statn_config;	/* Statistics configuration register */
-	u32	res_e4[7];
-
-	/* memac statistics counter registers */
-	u32	rx_eoct_l;	/* Rx ethernet octests lower */
-	u32	rx_eoct_u;	/* Rx ethernet octests upper */
-	u32	rx_oct_l;	/* Rx octests lower */
-	u32	rx_oct_u;	/* Rx octests upper */
-	u32	rx_align_err_l;	/* Rx alignment error lower */
-	u32	rx_align_err_u;	/* Rx alignment error upper */
-	u32	rx_pause_frame_l; /* Rx valid pause frame upper */
-	u32	rx_pause_frame_u; /* Rx valid pause frame upper */
-	u32	rx_frame_l;	/* Rx frame counter lower */
-	u32	rx_frame_u;	/* Rx frame counter upper */
-	u32	rx_frame_crc_err_l; /* Rx frame check sequence error lower */
-	u32	rx_frame_crc_err_u; /* Rx frame check sequence error upper */
-	u32	rx_vlan_l;	/* Rx VLAN frame lower */
-	u32	rx_vlan_u;	/* Rx VLAN frame upper */
-	u32	rx_err_l;	/* Rx frame error lower */
-	u32	rx_err_u;	/* Rx frame error upper */
-	u32	rx_uni_l;	/* Rx unicast frame lower */
-	u32	rx_uni_u;	/* Rx unicast frame upper */
-	u32	rx_multi_l;	/* Rx multicast frame lower */
-	u32	rx_multi_u;	/* Rx multicast frame upper */
-	u32	rx_brd_l;	/* Rx broadcast frame lower */
-	u32	rx_brd_u;	/* Rx broadcast frame upper */
-	u32	rx_drop_l;	/* Rx dropped packets lower */
-	u32	rx_drop_u;	/* Rx dropped packets upper */
-	u32	rx_pkt_l;	/* Rx packets lower */
-	u32	rx_pkt_u;	/* Rx packets upper */
-	u32	rx_undsz_l;	/* Rx undersized packet lower */
-	u32	rx_undsz_u;	/* Rx undersized packet upper */
-	u32	rx_64_l;	/* Rx 64 oct packet lower */
-	u32	rx_64_u;	/* Rx 64 oct packet upper */
-	u32	rx_127_l;	/* Rx 65 to 127 oct packet lower */
-	u32	rx_127_u;	/* Rx 65 to 127 oct packet upper */
-	u32	rx_255_l;	/* Rx 128 to 255 oct packet lower */
-	u32	rx_255_u;	/* Rx 128 to 255 oct packet upper */
-	u32	rx_511_l;	/* Rx 256 to 511 oct packet lower */
-	u32	rx_511_u;	/* Rx 256 to 511 oct packet upper */
-	u32	rx_1023_l;	/* Rx 512 to 1023 oct packet lower */
-	u32	rx_1023_u;	/* Rx 512 to 1023 oct packet upper */
-	u32	rx_1518_l;	/* Rx 1024 to 1518 oct packet lower */
-	u32	rx_1518_u;	/* Rx 1024 to 1518 oct packet upper */
-	u32	rx_1519_l;	/* Rx 1519 to max oct packet lower */
-	u32	rx_1519_u;	/* Rx 1519 to max oct packet upper */
-	u32	rx_oversz_l;	/* Rx oversized packet lower */
-	u32	rx_oversz_u;	/* Rx oversized packet upper */
-	u32	rx_jabber_l;	/* Rx Jabber packet lower */
-	u32	rx_jabber_u;	/* Rx Jabber packet upper */
-	u32	rx_frag_l;	/* Rx Fragment packet lower */
-	u32	rx_frag_u;	/* Rx Fragment packet upper */
-	u32	rx_cnp_l;	/* Rx control packet lower */
-	u32	rx_cnp_u;	/* Rx control packet upper */
-	u32	rx_drntp_l;	/* Rx dripped not truncated packet lower */
-	u32	rx_drntp_u;	/* Rx dripped not truncated packet upper */
-	u32	res_1d0[0xc];
-
-	u32	tx_eoct_l;	/* Tx ethernet octests lower */
-	u32	tx_eoct_u;	/* Tx ethernet octests upper */
-	u32	tx_oct_l;	/* Tx octests lower */
-	u32	tx_oct_u;	/* Tx octests upper */
-	u32	res_210[0x2];
-	u32	tx_pause_frame_l; /* Tx valid pause frame lower */
-	u32	tx_pause_frame_u; /* Tx valid pause frame upper */
-	u32	tx_frame_l;	/* Tx frame counter lower */
-	u32	tx_frame_u;	/* Tx frame counter upper */
-	u32	tx_frame_crc_err_l; /* Tx frame check sequence error lower */
-	u32	tx_frame_crc_err_u; /* Tx frame check sequence error upper */
-	u32	tx_vlan_l;	/* Tx VLAN frame lower */
-	u32	tx_vlan_u;	/* Tx VLAN frame upper */
-	u32	tx_frame_err_l;	/* Tx frame error lower */
-	u32	tx_frame_err_u;	/* Tx frame error upper */
-	u32	tx_uni_l;	/* Tx unicast frame lower */
-	u32	tx_uni_u;	/* Tx unicast frame upper */
-	u32	tx_multi_l;	/* Tx multicast frame lower */
-	u32	tx_multi_u;	/* Tx multicast frame upper */
-	u32	tx_brd_l;	/* Tx broadcast frame lower */
-	u32	tx_brd_u;	/* Tx broadcast frame upper */
-	u32	res_258[0x2];
-	u32	tx_pkt_l;	/* Tx packets lower */
-	u32	tx_pkt_u;	/* Tx packets upper */
-	u32	tx_undsz_l;	/* Tx undersized packet lower */
-	u32	tx_undsz_u;	/* Tx undersized packet upper */
-	u32	tx_64_l;	/* Tx 64 oct packet lower */
-	u32	tx_64_u;	/* Tx 64 oct packet upper */
-	u32	tx_127_l;	/* Tx 65 to 127 oct packet lower */
-	u32	tx_127_u;	/* Tx 65 to 127 oct packet upper */
-	u32	tx_255_l;	/* Tx 128 to 255 oct packet lower */
-	u32	tx_255_u;	/* Tx 128 to 255 oct packet upper */
-	u32	tx_511_l;	/* Tx 256 to 511 oct packet lower */
-	u32	tx_511_u;	/* Tx 256 to 511 oct packet upper */
-	u32	tx_1023_l;	/* Tx 512 to 1023 oct packet lower */
-	u32	tx_1023_u;	/* Tx 512 to 1023 oct packet upper */
-	u32	tx_1518_l;	/* Tx 1024 to 1518 oct packet lower */
-	u32	tx_1518_u;	/* Tx 1024 to 1518 oct packet upper */
-	u32	tx_1519_l;	/* Tx 1519 to max oct packet lower */
-	u32	tx_1519_u;	/* Tx 1519 to max oct packet upper */
-	u32	res_2a8[0x6];
-	u32	tx_cnp_l;	/* Tx control packet lower */
-	u32	tx_cnp_u;	/* Tx control packet upper */
-	u32	res_2c8[0xe];
-
-	/* Line interface control register */
-	u32 if_mode;		/* interface mode control */
-	u32 if_status;		/* interface status */
-	u32 res_308[0xe];
-
-	/* HiGig/2 Register */
-	u32 hg_config;	/* HiGig2 control and configuration */
-	u32 res_344[0x3];
-	u32 hg_pause_quanta;	/* HiGig2 pause quanta */
-	u32 res_354[0x3];
-	u32 hg_pause_thresh;	/* HiGig2 pause quanta threshold */
-	u32 res_364[0x3];
-	u32 hgrx_pause_status;	/* HiGig2 rx pause quanta status */
-	u32 hg_fifos_status;	/* HiGig2 fifos status */
-	u32 rhm;	/* Rx HiGig2 message counter register */
-	u32 thm;/* Tx HiGig2 message counter register */
-	u32 res_380[0x320];
-};
-
-/* COMMAND_CONFIG - command and configuration register */
-#define MEMAC_CMD_CFG_RX_EN		0x00000002 /* MAC Rx path enable */
-#define MEMAC_CMD_CFG_TX_EN		0x00000001 /* MAC Tx path enable */
-#define MEMAC_CMD_CFG_RXTX_EN	(MEMAC_CMD_CFG_RX_EN | MEMAC_CMD_CFG_TX_EN)
-#define MEMAC_CMD_CFG_NO_LEN_CHK 0x20000 /* Payload length check disable */
-
-/* HASHTABLE_CTRL - Hashtable control register */
-#define HASHTABLE_CTRL_MCAST_EN	0x00000200 /* enable mulitcast Rx hash */
-#define HASHTABLE_CTRL_ADDR_MASK	0x000001ff
-
-/* TX_IPG_LENGTH - Transmit inter-packet gap length register */
-#define TX_IPG_LENGTH_IPG_LEN_MASK	0x000003ff
-
-/* IMASK - interrupt mask register */
-#define IMASK_MDIO_SCAN_EVENT	0x00010000 /* MDIO scan event mask */
-#define IMASK_MDIO_CMD_CMPL	0x00008000 /* MDIO cmd completion mask */
-#define IMASK_REM_FAULT		0x00004000 /* remote fault mask */
-#define IMASK_LOC_FAULT		0x00002000 /* local fault mask */
-#define IMASK_TX_ECC_ER		0x00001000 /* Tx frame ECC error mask */
-#define IMASK_TX_FIFO_UNFL	0x00000800 /* Tx FIFO underflow mask */
-#define IMASK_TX_ER		0x00000200 /* Tx frame error mask */
-#define IMASK_RX_FIFO_OVFL	0x00000100 /* Rx FIFO overflow mask */
-#define IMASK_RX_ECC_ER		0x00000080 /* Rx frame ECC error mask */
-#define IMASK_RX_JAB_FRM	0x00000040 /* Rx jabber frame mask */
-#define IMASK_RX_OVRSZ_FRM	0x00000020 /* Rx oversized frame mask */
-#define IMASK_RX_RUNT_FRM	0x00000010 /* Rx runt frame mask */
-#define IMASK_RX_FRAG_FRM	0x00000008 /* Rx fragment frame mask */
-#define IMASK_RX_LEN_ER		0x00000004 /* Rx payload length error mask */
-#define IMASK_RX_CRC_ER		0x00000002 /* Rx CRC error mask */
-#define IMASK_RX_ALIGN_ER	0x00000001 /* Rx alignment error mask */
-
-#define IMASK_MASK_ALL		0x00000000
-
-/* IEVENT - interrupt event register */
-#define IEVENT_MDIO_SCAN_EVENT	0x00010000 /* MDIO scan event */
-#define IEVENT_MDIO_CMD_CMPL	0x00008000 /* MDIO cmd completion */
-#define IEVENT_REM_FAULT	0x00004000 /* remote fault */
-#define IEVENT_LOC_FAULT	0x00002000 /* local fault */
-#define IEVENT_TX_ECC_ER	0x00001000 /* Tx frame ECC error */
-#define IEVENT_TX_FIFO_UNFL	0x00000800 /* Tx FIFO underflow */
-#define IEVENT_TX_ER		0x00000200 /* Tx frame error */
-#define IEVENT_RX_FIFO_OVFL	0x00000100 /* Rx FIFO overflow */
-#define IEVENT_RX_ECC_ER	0x00000080 /* Rx frame ECC error */
-#define IEVENT_RX_JAB_FRM	0x00000040 /* Rx jabber frame */
-#define IEVENT_RX_OVRSZ_FRM	0x00000020 /* Rx oversized frame */
-#define IEVENT_RX_RUNT_FRM	0x00000010 /* Rx runt frame */
-#define IEVENT_RX_FRAG_FRM	0x00000008 /* Rx fragment frame */
-#define IEVENT_RX_LEN_ER	0x00000004 /* Rx payload length error */
-#define IEVENT_RX_CRC_ER	0x00000002 /* Rx CRC error */
-#define IEVENT_RX_ALIGN_ER	0x00000001 /* Rx alignment error */
-
-#define IEVENT_CLEAR_ALL	0xffffffff
-
-/* IF_MODE - Interface Mode Register */
-#define IF_MODE_EN_AUTO	0x00008000 /* 1 - Enable automatic speed selection */
-#define IF_MODE_SETSP_100M	0x00000000 /* 00 - 100Mbps RGMII */
-#define IF_MODE_SETSP_10M	0x00002000 /* 01 - 10Mbps RGMII */
-#define IF_MODE_SETSP_1000M	0x00004000 /* 10 - 1000Mbps RGMII */
-#define IF_MODE_SETSP_MASK	0x00006000 /* setsp mask bits */
-#define IF_MODE_XGMII	0x00000000 /* 00- XGMII(10) interface mode */
-#define IF_MODE_GMII		0x00000002 /* 10- GMII interface mode */
-#define IF_MODE_MASK	0x00000003 /* mask for mode interface mode */
-#define IF_MODE_RG		0x00000004 /* 1- RGMII */
-#define IF_MODE_RM		0x00000008 /* 1- RGMII */
-
-#define IF_DEFAULT	(IF_GMII)
-
-/* Internal PHY Registers - SGMII */
-#define PHY_SGMII_CR_PHY_RESET      0x8000
-#define PHY_SGMII_CR_RESET_AN       0x0200
-#define PHY_SGMII_CR_DEF_VAL        0x1140
-#define PHY_SGMII_DEV_ABILITY_SGMII 0x4001
-#define PHY_SGMII_IF_MODE_AN        0x0002
-#define PHY_SGMII_IF_MODE_SGMII     0x0001
-
-struct memac_mdio_controller {
-	u32	res0[0xc];
-	u32	mdio_stat;	/* MDIO configuration and status */
-	u32	mdio_ctl;	/* MDIO control */
-	u32	mdio_data;	/* MDIO data */
-	u32	mdio_addr;	/* MDIO address */
-};
-
-#define MDIO_STAT_CLKDIV(x)	(((x>>1) & 0xff) << 8)
-#define MDIO_STAT_BSY		(1 << 0)
-#define MDIO_STAT_RD_ER		(1 << 1)
-#define MDIO_STAT_PRE		(1 << 5)
-#define MDIO_STAT_ENC		(1 << 6)
-#define MDIO_STAT_HOLD_15_CLK	(7 << 2)
-#define MDIO_STAT_NEG		(1 << 23)
-
-#define MDIO_CTL_DEV_ADDR(x)	(x & 0x1f)
-#define MDIO_CTL_PORT_ADDR(x)	((x & 0x1f) << 5)
-#define MDIO_CTL_PRE_DIS	(1 << 10)
-#define MDIO_CTL_SCAN_EN	(1 << 11)
-#define MDIO_CTL_POST_INC	(1 << 14)
-#define MDIO_CTL_READ		(1 << 15)
-
-#define MDIO_DATA(x)		(x & 0xffff)
-#define MDIO_DATA_BSY		(1 << 31)
-
-struct fsl_enet_mac;
-
-void init_memac(struct fsl_enet_mac *mac, void *base, void *phyregs,
-		int max_rx_len);
-
-#endif
diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h
index 49f6814383..8f794ef381 100644
--- a/arch/powerpc/include/asm/fsl_secure_boot.h
+++ b/arch/powerpc/include/asm/fsl_secure_boot.h
@@ -67,5 +67,24 @@
 #define CONFIG_FSL_ISBC_KEY_EXT
 #endif
 
+#ifndef CONFIG_FIT_SIGNATURE
+/* The bootscript header address is different for B4860 because the NOR
+ * mapping is different on B4 due to reduced NOR size.
+ */
+#if defined(CONFIG_B4860QDS)
+#define CONFIG_BOOTSCRIPT_HDR_ADDR	0xecc00000
+#elif defined(CONFIG_FSL_CORENET)
+#define CONFIG_BOOTSCRIPT_HDR_ADDR	0xe8e00000
+#elif defined(CONFIG_BSC9132QDS)
+#define CONFIG_BOOTSCRIPT_HDR_ADDR	0x88020000
+#elif defined(CONFIG_C29XPCIE)
+#define CONFIG_BOOTSCRIPT_HDR_ADDR	0xec020000
+#else
+#define CONFIG_BOOTSCRIPT_HDR_ADDR	0xee020000
+#endif
+
+#include <config_fsl_secboot.h>
+#endif
+
 #endif
 #endif