x86: Add a x86_ prefix to the x86-specific PCI functions

These functions currently use a generic name, but they are for x86 only.
This may introduce confusion and prevents U-Boot from using these names
more widely.

In fact it should be possible to remove these at some point and use
generic functions, but for now, rename them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

20 files changed, 191 insertions, 187 deletions

diff --git a/arch/x86/cpu/baytrail/early_uart.c b/arch/x86/cpu/baytrail/early_uart.c
index 41992105fe..b64a3a90db 100644
--- a/arch/x86/cpu/baytrail/early_uart.c
+++ b/arch/x86/cpu/baytrail/early_uart.c
@@ -50,7 +50,7 @@ static void score_select_func(int pad, int func)
 	writel(reg, pconf0_addr);
 }
 
-static void pci_write_config32(int dev, unsigned int where, u32 value)
+static void x86_pci_write_config32(int dev, unsigned int where, u32 value)
 {
 	unsigned long addr;
 
@@ -62,7 +62,8 @@ static void pci_write_config32(int dev, unsigned int where, u32 value)
 int setup_early_uart(void)
 {
 	/* Enable the legacy UART hardware. */
-	pci_write_config32(PCI_DEV_CONFIG(0, LPC_DEV, LPC_FUNC), UART_CONT, 1);
+	x86_pci_write_config32(PCI_DEV_CONFIG(0, LPC_DEV, LPC_FUNC), UART_CONT,
+			       1);
 
 	/*
 	 * Set up the pads to the UART function. This allows the signals to
diff --git a/arch/x86/cpu/ivybridge/bd82x6x.c b/arch/x86/cpu/ivybridge/bd82x6x.c
index 65a17d3e7f..56b19e37bb 100644
--- a/arch/x86/cpu/ivybridge/bd82x6x.c
+++ b/arch/x86/cpu/ivybridge/bd82x6x.c
@@ -22,36 +22,36 @@ void bd82x6x_pci_init(pci_dev_t dev)
 
 	debug("bd82x6x PCI init.\n");
 	/* Enable Bus Master */
-	reg16 = pci_read_config16(dev, PCI_COMMAND);
+	reg16 = x86_pci_read_config16(dev, PCI_COMMAND);
 	reg16 |= PCI_COMMAND_MASTER;
-	pci_write_config16(dev, PCI_COMMAND, reg16);
+	x86_pci_write_config16(dev, PCI_COMMAND, reg16);
 
 	/* This device has no interrupt */
-	pci_write_config8(dev, INTR, 0xff);
+	x86_pci_write_config8(dev, INTR, 0xff);
 
 	/* disable parity error response and SERR */
-	reg16 = pci_read_config16(dev, BCTRL);
+	reg16 = x86_pci_read_config16(dev, BCTRL);
 	reg16 &= ~(1 << 0);
 	reg16 &= ~(1 << 1);
-	pci_write_config16(dev, BCTRL, reg16);
+	x86_pci_write_config16(dev, BCTRL, reg16);
 
 	/* Master Latency Count must be set to 0x04! */
-	reg8 = pci_read_config8(dev, SMLT);
+	reg8 = x86_pci_read_config8(dev, SMLT);
 	reg8 &= 0x07;
 	reg8 |= (0x04 << 3);
-	pci_write_config8(dev, SMLT, reg8);
+	x86_pci_write_config8(dev, SMLT, reg8);
 
 	/* Will this improve throughput of bus masters? */
-	pci_write_config8(dev, PCI_MIN_GNT, 0x06);
+	x86_pci_write_config8(dev, PCI_MIN_GNT, 0x06);
 
 	/* Clear errors in status registers */
-	reg16 = pci_read_config16(dev, PSTS);
+	reg16 = x86_pci_read_config16(dev, PSTS);
 	/* reg16 |= 0xf900; */
-	pci_write_config16(dev, PSTS, reg16);
+	x86_pci_write_config16(dev, PSTS, reg16);
 
-	reg16 = pci_read_config16(dev, SECSTS);
+	reg16 = x86_pci_read_config16(dev, SECSTS);
 	/* reg16 |= 0xf900; */
-	pci_write_config16(dev, SECSTS, reg16);
+	x86_pci_write_config16(dev, SECSTS, reg16);
 }
 
 #define PCI_BRIDGE_UPDATE_COMMAND
@@ -59,7 +59,7 @@ void bd82x6x_pci_dev_enable_resources(pci_dev_t dev)
 {
 	uint16_t command;
 
-	command = pci_read_config16(dev, PCI_COMMAND);
+	command = x86_pci_read_config16(dev, PCI_COMMAND);
 	command |= PCI_COMMAND_IO;
 #ifdef PCI_BRIDGE_UPDATE_COMMAND
 	/*
@@ -67,7 +67,7 @@ void bd82x6x_pci_dev_enable_resources(pci_dev_t dev)
 	 * ROM and APICs to become invisible.
 	 */
 	debug("%x cmd <- %02x\n", dev, command);
-	pci_write_config16(dev, PCI_COMMAND, command);
+	x86_pci_write_config16(dev, PCI_COMMAND, command);
 #else
 	printf("%s cmd <- %02x (NOT WRITTEN!)\n", dev_path(dev), command);
 #endif
@@ -77,11 +77,11 @@ void bd82x6x_pci_bus_enable_resources(pci_dev_t dev)
 {
 	uint16_t ctrl;
 
-	ctrl = pci_read_config16(dev, PCI_BRIDGE_CONTROL);
+	ctrl = x86_pci_read_config16(dev, PCI_BRIDGE_CONTROL);
 	ctrl |= PCI_COMMAND_IO;
 	ctrl |= PCI_BRIDGE_CTL_VGA;
 	debug("%x bridge ctrl <- %04x\n", dev, ctrl);
-	pci_write_config16(dev, PCI_BRIDGE_CONTROL, ctrl);
+	x86_pci_write_config16(dev, PCI_BRIDGE_CONTROL, ctrl);
 
 	bd82x6x_pci_dev_enable_resources(dev);
 }
diff --git a/arch/x86/cpu/ivybridge/cpu.c b/arch/x86/cpu/ivybridge/cpu.c
index e9253100f6..5fd3753c47 100644
--- a/arch/x86/cpu/ivybridge/cpu.c
+++ b/arch/x86/cpu/ivybridge/cpu.c
@@ -167,21 +167,21 @@ static int enable_smbus(void)
 	dev = PCI_BDF(0x0, 0x1f, 0x3);
 
 	/* Check to make sure we've got the right device. */
-	value = pci_read_config16(dev, 0x0);
+	value = x86_pci_read_config16(dev, 0x0);
 	if (value != 0x8086) {
 		printf("SMBus controller not found\n");
 		return -ENOSYS;
 	}
 
 	/* Set SMBus I/O base. */
-	pci_write_config32(dev, SMB_BASE,
-			   SMBUS_IO_BASE | PCI_BASE_ADDRESS_SPACE_IO);
+	x86_pci_write_config32(dev, SMB_BASE,
+			       SMBUS_IO_BASE | PCI_BASE_ADDRESS_SPACE_IO);
 
 	/* Set SMBus enable. */
-	pci_write_config8(dev, HOSTC, HST_EN);
+	x86_pci_write_config8(dev, HOSTC, HST_EN);
 
 	/* Set SMBus I/O space enable. */
-	pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_IO);
+	x86_pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_IO);
 
 	/* Disable interrupt generation. */
 	outb(0, SMBUS_IO_BASE + SMBHSTCTL);
@@ -214,25 +214,25 @@ static void enable_usb_bar(void)
 	u32 cmd;
 
 	/* USB Controller 1 */
-	pci_write_config32(usb0, PCI_BASE_ADDRESS_0,
-			   PCH_EHCI0_TEMP_BAR0);
-	cmd = pci_read_config32(usb0, PCI_COMMAND);
+	x86_pci_write_config32(usb0, PCI_BASE_ADDRESS_0,
+			       PCH_EHCI0_TEMP_BAR0);
+	cmd = x86_pci_read_config32(usb0, PCI_COMMAND);
 	cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-	pci_write_config32(usb0, PCI_COMMAND, cmd);
+	x86_pci_write_config32(usb0, PCI_COMMAND, cmd);
 
 	/* USB Controller 1 */
-	pci_write_config32(usb1, PCI_BASE_ADDRESS_0,
-			   PCH_EHCI1_TEMP_BAR0);
-	cmd = pci_read_config32(usb1, PCI_COMMAND);
+	x86_pci_write_config32(usb1, PCI_BASE_ADDRESS_0,
+			       PCH_EHCI1_TEMP_BAR0);
+	cmd = x86_pci_read_config32(usb1, PCI_COMMAND);
 	cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-	pci_write_config32(usb1, PCI_COMMAND, cmd);
+	x86_pci_write_config32(usb1, PCI_COMMAND, cmd);
 
 	/* USB3 Controller */
-	pci_write_config32(usb3, PCI_BASE_ADDRESS_0,
-			   PCH_XHCI_TEMP_BAR0);
-	cmd = pci_read_config32(usb3, PCI_COMMAND);
+	x86_pci_write_config32(usb3, PCI_BASE_ADDRESS_0,
+			       PCH_XHCI_TEMP_BAR0);
+	cmd = x86_pci_read_config32(usb3, PCI_COMMAND);
 	cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-	pci_write_config32(usb3, PCI_COMMAND, cmd);
+	x86_pci_write_config32(usb3, PCI_COMMAND, cmd);
 }
 
 static int report_bist_failure(void)
@@ -320,8 +320,8 @@ int print_cpuinfo(void)
 	gd->arch.pei_boot_mode = boot_mode;
 
 	/* TODO: Move this to the board or driver */
-	pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE | 1);
-	pci_write_config32(PCH_LPC_DEV, GPIO_CNTL, 0x10);
+	x86_pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE | 1);
+	x86_pci_write_config32(PCH_LPC_DEV, GPIO_CNTL, 0x10);
 
 	/* Print processor name */
 	name = cpu_get_name(processor_name);
diff --git a/arch/x86/cpu/ivybridge/early_init.c b/arch/x86/cpu/ivybridge/early_init.c
index eb8f6139fe..9ca008e345 100644
--- a/arch/x86/cpu/ivybridge/early_init.c
+++ b/arch/x86/cpu/ivybridge/early_init.c
@@ -17,10 +17,10 @@ static void sandybridge_setup_bars(pci_dev_t pch_dev, pci_dev_t lpc_dev)
 {
 	/* Setting up Southbridge. In the northbridge code. */
 	debug("Setting up static southbridge registers\n");
-	pci_write_config32(lpc_dev, PCH_RCBA_BASE, DEFAULT_RCBA | 1);
+	x86_pci_write_config32(lpc_dev, PCH_RCBA_BASE, DEFAULT_RCBA | 1);
 
-	pci_write_config32(lpc_dev, PMBASE, DEFAULT_PMBASE | 1);
-	pci_write_config8(lpc_dev, ACPI_CNTL, 0x80); /* Enable ACPI BAR */
+	x86_pci_write_config32(lpc_dev, PMBASE, DEFAULT_PMBASE | 1);
+	x86_pci_write_config8(lpc_dev, ACPI_CNTL, 0x80); /* Enable ACPI BAR */
 
 	debug("Disabling watchdog reboot\n");
 	setbits_le32(RCB_REG(GCS), 1 >> 5);	/* No reset */
@@ -28,25 +28,27 @@ static void sandybridge_setup_bars(pci_dev_t pch_dev, pci_dev_t lpc_dev)
 
 	/* Set up all hardcoded northbridge BARs */
 	debug("Setting up static registers\n");
-	pci_write_config32(pch_dev, EPBAR, DEFAULT_EPBAR | 1);
-	pci_write_config32(pch_dev, EPBAR + 4, (0LL + DEFAULT_EPBAR) >> 32);
-	pci_write_config32(pch_dev, MCHBAR, DEFAULT_MCHBAR | 1);
-	pci_write_config32(pch_dev, MCHBAR + 4, (0LL + DEFAULT_MCHBAR) >> 32);
+	x86_pci_write_config32(pch_dev, EPBAR, DEFAULT_EPBAR | 1);
+	x86_pci_write_config32(pch_dev, EPBAR + 4, (0LL + DEFAULT_EPBAR) >> 32);
+	x86_pci_write_config32(pch_dev, MCHBAR, DEFAULT_MCHBAR | 1);
+	x86_pci_write_config32(pch_dev, MCHBAR + 4,
+			       (0LL + DEFAULT_MCHBAR) >> 32);
 	/* 64MB - busses 0-63 */
-	pci_write_config32(pch_dev, PCIEXBAR, DEFAULT_PCIEXBAR | 5);
-	pci_write_config32(pch_dev, PCIEXBAR + 4,
-			   (0LL + DEFAULT_PCIEXBAR) >> 32);
-	pci_write_config32(pch_dev, DMIBAR, DEFAULT_DMIBAR | 1);
-	pci_write_config32(pch_dev, DMIBAR + 4, (0LL + DEFAULT_DMIBAR) >> 32);
+	x86_pci_write_config32(pch_dev, PCIEXBAR, DEFAULT_PCIEXBAR | 5);
+	x86_pci_write_config32(pch_dev, PCIEXBAR + 4,
+			       (0LL + DEFAULT_PCIEXBAR) >> 32);
+	x86_pci_write_config32(pch_dev, DMIBAR, DEFAULT_DMIBAR | 1);
+	x86_pci_write_config32(pch_dev, DMIBAR + 4,
+			       (0LL + DEFAULT_DMIBAR) >> 32);
 
 	/* Set C0000-FFFFF to access RAM on both reads and writes */
-	pci_write_config8(pch_dev, PAM0, 0x30);
-	pci_write_config8(pch_dev, PAM1, 0x33);
-	pci_write_config8(pch_dev, PAM2, 0x33);
-	pci_write_config8(pch_dev, PAM3, 0x33);
-	pci_write_config8(pch_dev, PAM4, 0x33);
-	pci_write_config8(pch_dev, PAM5, 0x33);
-	pci_write_config8(pch_dev, PAM6, 0x33);
+	x86_pci_write_config8(pch_dev, PAM0, 0x30);
+	x86_pci_write_config8(pch_dev, PAM1, 0x33);
+	x86_pci_write_config8(pch_dev, PAM2, 0x33);
+	x86_pci_write_config8(pch_dev, PAM3, 0x33);
+	x86_pci_write_config8(pch_dev, PAM4, 0x33);
+	x86_pci_write_config8(pch_dev, PAM5, 0x33);
+	x86_pci_write_config8(pch_dev, PAM6, 0x33);
 }
 
 static void sandybridge_setup_graphics(pci_dev_t pch_dev, pci_dev_t video_dev)
@@ -55,7 +57,7 @@ static void sandybridge_setup_graphics(pci_dev_t pch_dev, pci_dev_t video_dev)
 	u16 reg16;
 	u8 reg8;
 
-	reg16 = pci_read_config16(video_dev, PCI_DEVICE_ID);
+	reg16 = x86_pci_read_config16(video_dev, PCI_DEVICE_ID);
 	switch (reg16) {
 	case 0x0102: /* GT1 Desktop */
 	case 0x0106: /* GT1 Mobile */
@@ -75,7 +77,7 @@ static void sandybridge_setup_graphics(pci_dev_t pch_dev, pci_dev_t video_dev)
 	debug("Initialising Graphics\n");
 
 	/* Setup IGD memory by setting GGC[7:3] = 1 for 32MB */
-	reg16 = pci_read_config16(pch_dev, GGC);
+	reg16 = x86_pci_read_config16(pch_dev, GGC);
 	reg16 &= ~0x00f8;
 	reg16 |= 1 << 3;
 	/* Program GTT memory by setting GGC[9:8] = 2MB */
@@ -83,13 +85,13 @@ static void sandybridge_setup_graphics(pci_dev_t pch_dev, pci_dev_t video_dev)
 	reg16 |= 2 << 8;
 	/* Enable VGA decode */
 	reg16 &= ~0x0002;
-	pci_write_config16(pch_dev, GGC, reg16);
+	x86_pci_write_config16(pch_dev, GGC, reg16);
 
 	/* Enable 256MB aperture */
-	reg8 = pci_read_config8(video_dev, MSAC);
+	reg8 = x86_pci_read_config8(video_dev, MSAC);
 	reg8 &= ~0x06;
 	reg8 |= 0x02;
-	pci_write_config8(video_dev, MSAC, reg8);
+	x86_pci_write_config8(video_dev, MSAC, reg8);
 
 	/* Erratum workarounds */
 	reg32 = readl(MCHBAR_REG(0x5f00));
@@ -124,22 +126,22 @@ void sandybridge_early_init(int chipset_type)
 	u8 reg8;
 
 	/* Device ID Override Enable should be done very early */
-	capid0_a = pci_read_config32(pch_dev, 0xe4);
+	capid0_a = x86_pci_read_config32(pch_dev, 0xe4);
 	if (capid0_a & (1 << 10)) {
-		reg8 = pci_read_config8(pch_dev, 0xf3);
+		reg8 = x86_pci_read_config8(pch_dev, 0xf3);
 		reg8 &= ~7; /* Clear 2:0 */
 
 		if (chipset_type == SANDYBRIDGE_MOBILE)
 			reg8 |= 1; /* Set bit 0 */
 
-		pci_write_config8(pch_dev, 0xf3, reg8);
+		x86_pci_write_config8(pch_dev, 0xf3, reg8);
 	}
 
 	/* Setup all BARs required for early PCIe and raminit */
 	sandybridge_setup_bars(pch_dev, lpc_dev);
 
 	/* Device Enable */
-	pci_write_config32(pch_dev, DEVEN, DEVEN_HOST | DEVEN_IGD);
+	x86_pci_write_config32(pch_dev, DEVEN, DEVEN_HOST | DEVEN_IGD);
 
 	sandybridge_setup_graphics(pch_dev, video_dev);
 }
diff --git a/arch/x86/cpu/ivybridge/early_me.c b/arch/x86/cpu/ivybridge/early_me.c
index b24dea10b1..356bbb4a38 100644
--- a/arch/x86/cpu/ivybridge/early_me.c
+++ b/arch/x86/cpu/ivybridge/early_me.c
@@ -29,7 +29,7 @@ static inline void pci_read_dword_ptr(void *ptr, int offset)
 {
 	u32 dword;
 
-	dword = pci_read_config32(PCH_ME_DEV, offset);
+	dword = x86_pci_read_config32(PCH_ME_DEV, offset);
 	memcpy(ptr, &dword, sizeof(dword));
 }
 
@@ -37,7 +37,7 @@ static inline void pci_write_dword_ptr(void *ptr, int offset)
 {
 	u32 dword = 0;
 	memcpy(&dword, ptr, sizeof(dword));
-	pci_write_config32(PCH_ME_DEV, offset, dword);
+	x86_pci_write_config32(PCH_ME_DEV, offset, dword);
 }
 
 void intel_early_me_status(void)
@@ -101,7 +101,7 @@ static inline void set_global_reset(int enable)
 {
 	u32 etr3;
 
-	etr3 = pci_read_config32(PCH_LPC_DEV, ETR3);
+	etr3 = x86_pci_read_config32(PCH_LPC_DEV, ETR3);
 
 	/* Clear CF9 Without Resume Well Reset Enable */
 	etr3 &= ~ETR3_CWORWRE;
@@ -112,7 +112,7 @@ static inline void set_global_reset(int enable)
 	else
 		etr3 &= ~ETR3_CF9GR;
 
-	pci_write_config32(PCH_LPC_DEV, ETR3, etr3);
+	x86_pci_write_config32(PCH_LPC_DEV, ETR3, etr3);
 }
 
 int intel_early_me_init_done(u8 status)
@@ -127,8 +127,8 @@ int intel_early_me_init_done(u8 status)
 	};
 
 	/* MEBASE from MESEG_BASE[35:20] */
-	mebase_l = pci_read_config32(PCH_DEV, PCI_CPU_MEBASE_L);
-	mebase_h = pci_read_config32(PCH_DEV, PCI_CPU_MEBASE_H);
+	mebase_l = x86_pci_read_config32(PCH_DEV, PCI_CPU_MEBASE_L);
+	mebase_h = x86_pci_read_config32(PCH_DEV, PCI_CPU_MEBASE_H);
 	mebase_h &= 0xf;
 	did.uma_base = (mebase_l >> 20) | (mebase_h << 12);
 
diff --git a/arch/x86/cpu/ivybridge/gma.c b/arch/x86/cpu/ivybridge/gma.c
index 821ea25019..ea169b05e9 100644
--- a/arch/x86/cpu/ivybridge/gma.c
+++ b/arch/x86/cpu/ivybridge/gma.c
@@ -741,9 +741,9 @@ int gma_func0_init(pci_dev_t dev, struct pci_controller *hose,
 	int ret;
 
 	/* IGD needs to be Bus Master */
-	reg32 = pci_read_config32(dev, PCI_COMMAND);
+	reg32 = x86_pci_read_config32(dev, PCI_COMMAND);
 	reg32 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO;
-	pci_write_config32(dev, PCI_COMMAND, reg32);
+	x86_pci_write_config32(dev, PCI_COMMAND, reg32);
 
 	/* Use write-combining for the graphics memory, 256MB */
 	base = pci_read_bar32(hose, dev, 2);
diff --git a/arch/x86/cpu/ivybridge/lpc.c b/arch/x86/cpu/ivybridge/lpc.c
index 43fdd31428..33b11a1799 100644
--- a/arch/x86/cpu/ivybridge/lpc.c
+++ b/arch/x86/cpu/ivybridge/lpc.c
@@ -29,7 +29,7 @@ static int pch_enable_apic(pci_dev_t dev)
 	int i;
 
 	/* Enable ACPI I/O and power management. Set SCI IRQ to IRQ9 */
-	pci_write_config8(dev, ACPI_CNTL, 0x80);
+	x86_pci_write_config8(dev, ACPI_CNTL, 0x80);
 
 	writel(0, IO_APIC_INDEX);
 	writel(1 << 25, IO_APIC_DATA);
@@ -72,9 +72,9 @@ static void pch_enable_serial_irqs(pci_dev_t dev)
 	/* Set packet length and toggle silent mode bit for one frame. */
 	value = (1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0);
 #ifdef CONFIG_SERIRQ_CONTINUOUS_MODE
-	pci_write_config8(dev, SERIRQ_CNTL, value);
+	x86_pci_write_config8(dev, SERIRQ_CNTL, value);
 #else
-	pci_write_config8(dev, SERIRQ_CNTL, value | (1 << 6));
+	x86_pci_write_config8(dev, SERIRQ_CNTL, value | (1 << 6));
 #endif
 }
 
@@ -86,15 +86,15 @@ static int pch_pirq_init(const void *blob, int node, pci_dev_t dev)
 				  sizeof(route)))
 		return -EINVAL;
 	ptr = route;
-	pci_write_config8(dev, PIRQA_ROUT, *ptr++);
-	pci_write_config8(dev, PIRQB_ROUT, *ptr++);
-	pci_write_config8(dev, PIRQC_ROUT, *ptr++);
-	pci_write_config8(dev, PIRQD_ROUT, *ptr++);
+	x86_pci_write_config8(dev, PIRQA_ROUT, *ptr++);
+	x86_pci_write_config8(dev, PIRQB_ROUT, *ptr++);
+	x86_pci_write_config8(dev, PIRQC_ROUT, *ptr++);
+	x86_pci_write_config8(dev, PIRQD_ROUT, *ptr++);
 
-	pci_write_config8(dev, PIRQE_ROUT, *ptr++);
-	pci_write_config8(dev, PIRQF_ROUT, *ptr++);
-	pci_write_config8(dev, PIRQG_ROUT, *ptr++);
-	pci_write_config8(dev, PIRQH_ROUT, *ptr++);
+	x86_pci_write_config8(dev, PIRQE_ROUT, *ptr++);
+	x86_pci_write_config8(dev, PIRQF_ROUT, *ptr++);
+	x86_pci_write_config8(dev, PIRQG_ROUT, *ptr++);
+	x86_pci_write_config8(dev, PIRQH_ROUT, *ptr++);
 
 	/*
 	 * TODO(sjg@chromium.org): U-Boot does not set up the interrupts
@@ -116,7 +116,7 @@ static int pch_gpi_routing(const void *blob, int node, pci_dev_t dev)
 	for (reg = 0, gpi = 0; gpi < ARRAY_SIZE(route); gpi++)
 		reg |= route[gpi] << (gpi * 2);
 
-	pci_write_config32(dev, 0xb8, reg);
+	x86_pci_write_config32(dev, 0xb8, reg);
 
 	return 0;
 }
@@ -141,7 +141,7 @@ static int pch_power_options(const void *blob, int node, pci_dev_t dev)
 	 */
 	pwr_on = MAINBOARD_POWER_ON;
 
-	reg16 = pci_read_config16(dev, GEN_PMCON_3);
+	reg16 = x86_pci_read_config16(dev, GEN_PMCON_3);
 	reg16 &= 0xfffe;
 	switch (pwr_on) {
 	case MAINBOARD_POWER_OFF:
@@ -168,7 +168,7 @@ static int pch_power_options(const void *blob, int node, pci_dev_t dev)
 
 	reg16 |= (1 << 12);	/* Disable SLP stretch after SUS well */
 
-	pci_write_config16(dev, GEN_PMCON_3, reg16);
+	x86_pci_write_config16(dev, GEN_PMCON_3, reg16);
 	debug("Set power %s after power failure.\n", state);
 
 	/* Set up NMI on errors. */
@@ -192,21 +192,21 @@ static int pch_power_options(const void *blob, int node, pci_dev_t dev)
 	outb(reg8, 0x70);
 
 	/* Enable CPU_SLP# and Intel Speedstep, set SMI# rate down */
-	reg16 = pci_read_config16(dev, GEN_PMCON_1);
+	reg16 = x86_pci_read_config16(dev, GEN_PMCON_1);
 	reg16 &= ~(3 << 0);	/* SMI# rate 1 minute */
 	reg16 &= ~(1 << 10);	/* Disable BIOS_PCI_EXP_EN for native PME */
 #if DEBUG_PERIODIC_SMIS
 	/* Set DEBUG_PERIODIC_SMIS in pch.h to debug using periodic SMIs */
 	reg16 |= (3 << 0);	/* Periodic SMI every 8s */
 #endif
-	pci_write_config16(dev, GEN_PMCON_1, reg16);
+	x86_pci_write_config16(dev, GEN_PMCON_1, reg16);
 
 	/* Set the board's GPI routing. */
 	ret = pch_gpi_routing(blob, node, dev);
 	if (ret)
 		return ret;
 
-	pmbase = pci_read_config16(dev, 0x40) & 0xfffe;
+	pmbase = x86_pci_read_config16(dev, 0x40) & 0xfffe;
 
 	writel(pmbase + GPE0_EN, fdtdec_get_int(blob, node,
 						"intel,gpe0-enable", 0));
@@ -231,11 +231,11 @@ static void pch_rtc_init(pci_dev_t dev)
 	int rtc_failed;
 	u8 reg8;
 
-	reg8 = pci_read_config8(dev, GEN_PMCON_3);
+	reg8 = x86_pci_read_config8(dev, GEN_PMCON_3);
 	rtc_failed = reg8 & RTC_BATTERY_DEAD;
 	if (rtc_failed) {
 		reg8 &= ~RTC_BATTERY_DEAD;
-		pci_write_config8(dev, GEN_PMCON_3, reg8);
+		x86_pci_write_config8(dev, GEN_PMCON_3, reg8);
 	}
 	debug("rtc_failed = 0x%x\n", rtc_failed);
 
@@ -258,7 +258,7 @@ static void pch_rtc_init(pci_dev_t dev)
 static void cpt_pm_init(pci_dev_t dev)
 {
 	debug("CougarPoint PM init\n");
-	pci_write_config8(dev, 0xa9, 0x47);
+	x86_pci_write_config8(dev, 0xa9, 0x47);
 	setbits_le32(RCB_REG(0x2238), (1 << 6) | (1 << 0));
 
 	setbits_le32(RCB_REG(0x228c), 1 << 0);
@@ -302,7 +302,7 @@ static void cpt_pm_init(pci_dev_t dev)
 static void ppt_pm_init(pci_dev_t dev)
 {
 	debug("PantherPoint PM init\n");
-	pci_write_config8(dev, 0xa9, 0x47);
+	x86_pci_write_config8(dev, 0xa9, 0x47);
 	setbits_le32(RCB_REG(0x2238), 1 << 0);
 	setbits_le32(RCB_REG(0x228c), 1 << 0);
 	setbits_le16(RCB_REG(0x1100), (1 << 13) | (1 << 14));
@@ -356,9 +356,9 @@ static void enable_clock_gating(pci_dev_t dev)
 
 	setbits_le32(RCB_REG(0x2234), 0xf);
 
-	reg16 = pci_read_config16(dev, GEN_PMCON_1);
+	reg16 = x86_pci_read_config16(dev, GEN_PMCON_1);
 	reg16 |= (1 << 2) | (1 << 11);
-	pci_write_config16(dev, GEN_PMCON_1, reg16);
+	x86_pci_write_config16(dev, GEN_PMCON_1, reg16);
 
 	pch_iobp_update(0xEB007F07, ~0UL, (1 << 31));
 	pch_iobp_update(0xEB004000, ~0UL, (1 << 7));
@@ -412,15 +412,15 @@ static void pch_lock_smm(pci_dev_t dev)
 #if TEST_SMM_FLASH_LOCKDOWN
 	/* Now try this: */
 	debug("Locking BIOS to RO... ");
-	reg8 = pci_read_config8(dev, 0xdc);	/* BIOS_CNTL */
+	reg8 = x86_pci_read_config8(dev, 0xdc);	/* BIOS_CNTL */
 	debug(" BLE: %s; BWE: %s\n", (reg8 & 2) ? "on" : "off",
 	      (reg8 & 1) ? "rw" : "ro");
 	reg8 &= ~(1 << 0);			/* clear BIOSWE */
-	pci_write_config8(dev, 0xdc, reg8);
+	x86_pci_write_config8(dev, 0xdc, reg8);
 	reg8 |= (1 << 1);			/* set BLE */
-	pci_write_config8(dev, 0xdc, reg8);
+	x86_pci_write_config8(dev, 0xdc, reg8);
 	debug("ok.\n");
-	reg8 = pci_read_config8(dev, 0xdc);	/* BIOS_CNTL */
+	reg8 = x86_pci_read_config8(dev, 0xdc);	/* BIOS_CNTL */
 	debug(" BLE: %s; BWE: %s\n", (reg8 & 2) ? "on" : "off",
 	      (reg8 & 1) ? "rw" : "ro");
 
@@ -428,9 +428,9 @@ static void pch_lock_smm(pci_dev_t dev)
 	writeb(0, 0xfff00000);
 	debug("Testing:\n");
 	reg8 |= (1 << 0);			/* set BIOSWE */
-	pci_write_config8(dev, 0xdc, reg8);
+	x86_pci_write_config8(dev, 0xdc, reg8);
 
-	reg8 = pci_read_config8(dev, 0xdc);	/* BIOS_CNTL */
+	reg8 = x86_pci_read_config8(dev, 0xdc);	/* BIOS_CNTL */
 	debug(" BLE: %s; BWE: %s\n", (reg8 & 2) ? "on" : "off",
 	      (reg8 & 1) ? "rw" : "ro");
 	debug("Done.\n");
@@ -443,9 +443,9 @@ static void pch_disable_smm_only_flashing(pci_dev_t dev)
 	u8 reg8;
 
 	debug("Enabling BIOS updates outside of SMM... ");
-	reg8 = pci_read_config8(dev, 0xdc);	/* BIOS_CNTL */
+	reg8 = x86_pci_read_config8(dev, 0xdc);	/* BIOS_CNTL */
 	reg8 &= ~(1 << 5);
-	pci_write_config8(dev, 0xdc, reg8);
+	x86_pci_write_config8(dev, 0xdc, reg8);
 }
 
 static void pch_fixups(pci_dev_t dev)
@@ -453,9 +453,9 @@ static void pch_fixups(pci_dev_t dev)
 	u8 gen_pmcon_2;
 
 	/* Indicate DRAM init done for MRC S3 to know it can resume */
-	gen_pmcon_2 = pci_read_config8(dev, GEN_PMCON_2);
+	gen_pmcon_2 = x86_pci_read_config8(dev, GEN_PMCON_2);
 	gen_pmcon_2 |= (1 << 7);
-	pci_write_config8(dev, GEN_PMCON_2, gen_pmcon_2);
+	x86_pci_write_config8(dev, GEN_PMCON_2, gen_pmcon_2);
 
 	/* Enable DMI ASPM in the PCH */
 	clrbits_le32(RCB_REG(0x2304), 1 << 10);
@@ -478,10 +478,10 @@ int lpc_early_init(const void *blob, int node, pci_dev_t dev)
 		return -EINVAL;
 
 	/* Set COM1/COM2 decode range */
-	pci_write_config16(dev, LPC_IO_DEC, 0x0010);
+	x86_pci_write_config16(dev, LPC_IO_DEC, 0x0010);
 
 	/* Enable PS/2 Keyboard/Mouse, EC areas and COM1 */
-	pci_write_config16(dev, LPC_EN, KBC_LPC_EN | MC_LPC_EN |
+	x86_pci_write_config16(dev, LPC_EN, KBC_LPC_EN | MC_LPC_EN |
 			   GAMEL_LPC_EN | COMA_LPC_EN);
 
 	/* Write all registers but use 0 if we run out of data */
@@ -491,7 +491,7 @@ int lpc_early_init(const void *blob, int node, pci_dev_t dev)
 
 		if (i < count)
 			reg = ptr->base | PCI_COMMAND_IO | (ptr->size << 16);
-		pci_write_config32(dev, LPC_GENX_DEC(i), reg);
+		x86_pci_write_config32(dev, LPC_GENX_DEC(i), reg);
 	}
 
 	return 0;
@@ -514,7 +514,7 @@ int lpc_init(struct pci_controller *hose, pci_dev_t dev)
 		return -ENOENT;
 
 	/* Set the value for PCI command register. */
-	pci_write_config16(dev, PCI_COMMAND, 0x000f);
+	x86_pci_write_config16(dev, PCI_COMMAND, 0x000f);
 
 	/* IO APIC initialization. */
 	pch_enable_apic(dev);
diff --git a/arch/x86/cpu/ivybridge/northbridge.c b/arch/x86/cpu/ivybridge/northbridge.c
index c50b5ded83..e95e60e519 100644
--- a/arch/x86/cpu/ivybridge/northbridge.c
+++ b/arch/x86/cpu/ivybridge/northbridge.c
@@ -30,7 +30,7 @@ int bridge_silicon_revision(void)
 		result = cpuid(1);
 		stepping = result.eax & 0xf;
 		dev = PCI_BDF(0, 0, 0);
-		bridge_id = pci_read_config16(dev, PCI_DEVICE_ID) & 0xf0;
+		bridge_id = x86_pci_read_config16(dev, PCI_DEVICE_ID) & 0xf0;
 		bridge_revision_id = bridge_id | stepping;
 	}
 
@@ -55,7 +55,7 @@ static int get_pcie_bar(u32 *base, u32 *len)
 	*base = 0;
 	*len = 0;
 
-	pciexbar_reg = pci_read_config32(dev, PCIEXBAR);
+	pciexbar_reg = x86_pci_read_config32(dev, PCIEXBAR);
 
 	if (!(pciexbar_reg & (1 << 0)))
 		return 0;
@@ -170,7 +170,7 @@ void northbridge_init(pci_dev_t dev)
 void northbridge_enable(pci_dev_t dev)
 {
 #if CONFIG_HAVE_ACPI_RESUME
-	switch (pci_read_config32(dev, SKPAD)) {
+	switch (x86_pci_read_config32(dev, SKPAD)) {
 	case 0xcafebabe:
 		debug("Normal boot.\n");
 		apci_set_slp_type(0);
diff --git a/arch/x86/cpu/ivybridge/pch.c b/arch/x86/cpu/ivybridge/pch.c
index fa04d488f3..bbab64699e 100644
--- a/arch/x86/cpu/ivybridge/pch.c
+++ b/arch/x86/cpu/ivybridge/pch.c
@@ -21,7 +21,7 @@ int pch_silicon_revision(void)
 	dev = PCH_LPC_DEV;
 
 	if (pch_revision_id < 0)
-		pch_revision_id = pci_read_config8(dev, PCI_REVISION_ID);
+		pch_revision_id = x86_pci_read_config8(dev, PCI_REVISION_ID);
 	return pch_revision_id;
 }
 
@@ -32,7 +32,7 @@ int pch_silicon_type(void)
 	dev = PCH_LPC_DEV;
 
 	if (pch_type < 0)
-		pch_type = pci_read_config8(dev, PCI_DEVICE_ID + 1);
+		pch_type = x86_pci_read_config8(dev, PCI_DEVICE_ID + 1);
 	return pch_type;
 }
 
diff --git a/arch/x86/cpu/ivybridge/pci.c b/arch/x86/cpu/ivybridge/pci.c
index 452d1c3a15..7f62a86e32 100644
--- a/arch/x86/cpu/ivybridge/pci.c
+++ b/arch/x86/cpu/ivybridge/pci.c
@@ -70,9 +70,9 @@ int board_pci_pre_scan(struct pci_controller *hose)
 
 	reg16 = 0xff;
 	dev = PCH_DEV;
-	reg16 = pci_read_config16(dev, PCI_COMMAND);
+	reg16 = x86_pci_read_config16(dev, PCI_COMMAND);
 	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-	pci_write_config16(dev, PCI_COMMAND, reg16);
+	x86_pci_write_config16(dev, PCI_COMMAND, reg16);
 
 	/*
 	* Clear non-reserved bits in status register.
diff --git a/arch/x86/cpu/ivybridge/report_platform.c b/arch/x86/cpu/ivybridge/report_platform.c
index 69e31b3ca2..44938709c9 100644
--- a/arch/x86/cpu/ivybridge/report_platform.c
+++ b/arch/x86/cpu/ivybridge/report_platform.c
@@ -70,14 +70,14 @@ static void report_pch_info(void)
 	u16 dev_id;
 	uint8_t rev_id;
 
-	dev_id = pci_read_config16(PCH_LPC_DEV, 2);
+	dev_id = x86_pci_read_config16(PCH_LPC_DEV, 2);
 	for (i = 0; i < ARRAY_SIZE(pch_table); i++) {
 		if (pch_table[i].dev_id == dev_id) {
 			pch_type = pch_table[i].dev_name;
 			break;
 		}
 	}
-	rev_id = pci_read_config8(PCH_LPC_DEV, 8);
+	rev_id = x86_pci_read_config8(PCH_LPC_DEV, 8);
 	debug("PCH type: %s, device id: %x, rev id %x\n", pch_type, dev_id,
 	      rev_id);
 }
diff --git a/arch/x86/cpu/ivybridge/sata.c b/arch/x86/cpu/ivybridge/sata.c
index bbcd47da60..e7bf03c1dc 100644
--- a/arch/x86/cpu/ivybridge/sata.c
+++ b/arch/x86/cpu/ivybridge/sata.c
@@ -14,14 +14,14 @@
 
 static inline u32 sir_read(pci_dev_t dev, int idx)
 {
-	pci_write_config32(dev, SATA_SIRI, idx);
-	return pci_read_config32(dev, SATA_SIRD);
+	x86_pci_write_config32(dev, SATA_SIRI, idx);
+	return x86_pci_read_config32(dev, SATA_SIRD);
 }
 
 static inline void sir_write(pci_dev_t dev, int idx, u32 value)
 {
-	pci_write_config32(dev, SATA_SIRI, idx);
-	pci_write_config32(dev, SATA_SIRD, value);
+	x86_pci_write_config32(dev, SATA_SIRI, idx);
+	x86_pci_write_config32(dev, SATA_SIRD, value);
 }
 
 static void common_sata_init(pci_dev_t dev, unsigned int port_map)
@@ -31,17 +31,17 @@ static void common_sata_init(pci_dev_t dev, unsigned int port_map)
 
 	/* Set IDE I/O Configuration */
 	reg32 = SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
-	pci_write_config32(dev, IDE_CONFIG, reg32);
+	x86_pci_write_config32(dev, IDE_CONFIG, reg32);
 
 	/* Port enable */
-	reg16 = pci_read_config16(dev, 0x92);
+	reg16 = x86_pci_read_config16(dev, 0x92);
 	reg16 &= ~0x3f;
 	reg16 |= port_map;
-	pci_write_config16(dev, 0x92, reg16);
+	x86_pci_write_config16(dev, 0x92, reg16);
 
 	/* SATA Initialization register */
 	port_map &= 0xff;
-	pci_write_config32(dev, 0x94, ((port_map ^ 0x3f) << 24) | 0x183);
+	x86_pci_write_config32(dev, 0x94, ((port_map ^ 0x3f) << 24) | 0x183);
 }
 
 void bd82x6x_sata_init(pci_dev_t dev, const void *blob, int node)
@@ -60,7 +60,7 @@ void bd82x6x_sata_init(pci_dev_t dev, const void *blob, int node)
 				       "sata_interface_speed_support", 0);
 
 	/* Enable BARs */
-	pci_write_config16(dev, PCI_COMMAND, 0x0007);
+	x86_pci_write_config16(dev, PCI_COMMAND, 0x0007);
 
 	mode = fdt_getprop(blob, node, "intel,sata-mode", NULL);
 	if (!mode || !strcmp(mode, "ahci")) {
@@ -69,18 +69,18 @@ void bd82x6x_sata_init(pci_dev_t dev, const void *blob, int node)
 		debug("SATA: Controller in AHCI mode\n");
 
 		/* Set Interrupt Line, Interrupt Pin is set by D31IP.PIP */
-		pci_write_config8(dev, INTR_LN, 0x0a);
+		x86_pci_write_config8(dev, INTR_LN, 0x0a);
 
 		/* Set timings */
-		pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
+		x86_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
 				IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
 				IDE_PPE0 | IDE_IE0 | IDE_TIME0);
-		pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
+		x86_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
 				IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS);
 
 		/* Sync DMA */
-		pci_write_config16(dev, IDE_SDMA_CNT, IDE_PSDE0);
-		pci_write_config16(dev, IDE_SDMA_TIM, 0x0001);
+		x86_pci_write_config16(dev, IDE_SDMA_CNT, IDE_PSDE0);
+		x86_pci_write_config16(dev, IDE_SDMA_TIM, 0x0001);
 
 		common_sata_init(dev, 0x8000 | port_map);
 
@@ -115,22 +115,22 @@ void bd82x6x_sata_init(pci_dev_t dev, const void *blob, int node)
 		/* No AHCI: clear AHCI base */
 		pci_write_bar32(hose, dev, 5, 0x00000000);
 		/* And without AHCI BAR no memory decoding */
-		reg16 = pci_read_config16(dev, PCI_COMMAND);
+		reg16 = x86_pci_read_config16(dev, PCI_COMMAND);
 		reg16 &= ~PCI_COMMAND_MEMORY;
-		pci_write_config16(dev, PCI_COMMAND, reg16);
+		x86_pci_write_config16(dev, PCI_COMMAND, reg16);
 
-		pci_write_config8(dev, 0x09, 0x80);
+		x86_pci_write_config8(dev, 0x09, 0x80);
 
 		/* Set timings */
-		pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
+		x86_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
 				IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS);
-		pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
+		x86_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
 				IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
 				IDE_PPE0 | IDE_IE0 | IDE_TIME0);
 
 		/* Sync DMA */
-		pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0);
-		pci_write_config16(dev, IDE_SDMA_TIM, 0x0200);
+		x86_pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0);
+		x86_pci_write_config16(dev, IDE_SDMA_TIM, 0x0200);
 
 		common_sata_init(dev, port_map);
 	} else {
@@ -140,31 +140,32 @@ void bd82x6x_sata_init(pci_dev_t dev, const void *blob, int node)
 		pci_write_bar32(hose, dev, 5, 0x00000000);
 
 		/* And without AHCI BAR no memory decoding */
-		reg16 = pci_read_config16(dev, PCI_COMMAND);
+		reg16 = x86_pci_read_config16(dev, PCI_COMMAND);
 		reg16 &= ~PCI_COMMAND_MEMORY;
-		pci_write_config16(dev, PCI_COMMAND, reg16);
+		x86_pci_write_config16(dev, PCI_COMMAND, reg16);
 
 		/*
 		 * Native mode capable on both primary and secondary (0xa)
 		 * OR'ed with enabled (0x50) = 0xf
 		 */
-		pci_write_config8(dev, 0x09, 0x8f);
+		x86_pci_write_config8(dev, 0x09, 0x8f);
 
 		/* Set Interrupt Line */
 		/* Interrupt Pin is set by D31IP.PIP */
-		pci_write_config8(dev, INTR_LN, 0xff);
+		x86_pci_write_config8(dev, INTR_LN, 0xff);
 
 		/* Set timings */
-		pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
+		x86_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
 				IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
 				IDE_PPE0 | IDE_IE0 | IDE_TIME0);
-		pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
+		x86_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
 				IDE_SITRE | IDE_ISP_3_CLOCKS |
 				IDE_RCT_1_CLOCKS | IDE_IE0 | IDE_TIME0);
 
 		/* Sync DMA */
-		pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0 | IDE_PSDE0);
-		pci_write_config16(dev, IDE_SDMA_TIM, 0x0201);
+		x86_pci_write_config16(dev, IDE_SDMA_CNT,
+				       IDE_SSDE0 | IDE_PSDE0);
+		x86_pci_write_config16(dev, IDE_SDMA_TIM, 0x0201);
 
 		common_sata_init(dev, port_map);
 	}
@@ -221,5 +222,5 @@ void bd82x6x_sata_enable(pci_dev_t dev, const void *blob, int node)
 	port_map = fdtdec_get_int(blob, node, "intel,sata-port-map", 0);
 
 	map |= (port_map ^ 0x3f) << 8;
-	pci_write_config16(dev, 0x90, map);
+	x86_pci_write_config16(dev, 0x90, map);
 }
diff --git a/arch/x86/cpu/ivybridge/sdram.c b/arch/x86/cpu/ivybridge/sdram.c
index 766b385c25..672d06999d 100644
--- a/arch/x86/cpu/ivybridge/sdram.c
+++ b/arch/x86/cpu/ivybridge/sdram.c
@@ -444,7 +444,7 @@ int sdram_initialise(struct pei_data *pei_data)
 	 * Send ME init done for SandyBridge here.  This is done inside the
 	 * SystemAgent binary on IvyBridge
 	 */
-	done = pci_read_config32(PCH_DEV, PCI_DEVICE_ID);
+	done = x86_pci_read_config32(PCH_DEV, PCI_DEVICE_ID);
 	done &= BASE_REV_MASK;
 	if (BASE_REV_SNB == done)
 		intel_early_me_init_done(ME_INIT_STATUS_SUCCESS);
@@ -615,24 +615,24 @@ static int sdram_find(pci_dev_t dev)
 	 */
 
 	/* Top of Upper Usable DRAM, including remap */
-	touud = pci_read_config32(dev, TOUUD+4);
+	touud = x86_pci_read_config32(dev, TOUUD+4);
 	touud <<= 32;
-	touud |= pci_read_config32(dev, TOUUD);
+	touud |= x86_pci_read_config32(dev, TOUUD);
 
 	/* Top of Lower Usable DRAM */
-	tolud = pci_read_config32(dev, TOLUD);
+	tolud = x86_pci_read_config32(dev, TOLUD);
 
 	/* Top of Memory - does not account for any UMA */
-	tom = pci_read_config32(dev, 0xa4);
+	tom = x86_pci_read_config32(dev, 0xa4);
 	tom <<= 32;
-	tom |= pci_read_config32(dev, 0xa0);
+	tom |= x86_pci_read_config32(dev, 0xa0);
 
 	debug("TOUUD %llx TOLUD %08x TOM %llx\n", touud, tolud, tom);
 
 	/* ME UMA needs excluding if total memory <4GB */
-	me_base = pci_read_config32(dev, 0x74);
+	me_base = x86_pci_read_config32(dev, 0x74);
 	me_base <<= 32;
-	me_base |= pci_read_config32(dev, 0x70);
+	me_base |= x86_pci_read_config32(dev, 0x70);
 
 	debug("MEBASE %llx\n", me_base);
 
@@ -650,7 +650,7 @@ static int sdram_find(pci_dev_t dev)
 	}
 
 	/* Graphics memory comes next */
-	ggc = pci_read_config16(dev, GGC);
+	ggc = x86_pci_read_config16(dev, GGC);
 	if (!(ggc & 2)) {
 		debug("IGD decoded, subtracting ");
 
@@ -670,7 +670,7 @@ static int sdram_find(pci_dev_t dev)
 	}
 
 	/* Calculate TSEG size from its base which must be below GTT */
-	tseg_base = pci_read_config32(dev, 0xb8);
+	tseg_base = x86_pci_read_config32(dev, 0xb8);
 	uma_size = (uma_memory_base - tseg_base) >> 10;
 	tomk -= uma_size;
 	uma_memory_base = tomk * 1024ULL;
diff --git a/arch/x86/cpu/ivybridge/usb_ehci.c b/arch/x86/cpu/ivybridge/usb_ehci.c
index 291c971a2f..da11aee94d 100644
--- a/arch/x86/cpu/ivybridge/usb_ehci.c
+++ b/arch/x86/cpu/ivybridge/usb_ehci.c
@@ -20,10 +20,10 @@ void bd82x6x_usb_ehci_init(pci_dev_t dev)
 	writel(reg32, RCB_REG(0x35b0));
 
 	debug("EHCI: Setting up controller.. ");
-	reg32 = pci_read_config32(dev, PCI_COMMAND);
+	reg32 = x86_pci_read_config32(dev, PCI_COMMAND);
 	reg32 |= PCI_COMMAND_MASTER;
 	/* reg32 |= PCI_COMMAND_SERR; */
-	pci_write_config32(dev, PCI_COMMAND, reg32);
+	x86_pci_write_config32(dev, PCI_COMMAND, reg32);
 
 	debug("done.\n");
 }
diff --git a/arch/x86/cpu/ivybridge/usb_xhci.c b/arch/x86/cpu/ivybridge/usb_xhci.c
index 4a32a7eb31..f77b80489b 100644
--- a/arch/x86/cpu/ivybridge/usb_xhci.c
+++ b/arch/x86/cpu/ivybridge/usb_xhci.c
@@ -16,17 +16,17 @@ void bd82x6x_usb_xhci_init(pci_dev_t dev)
 	debug("XHCI: Setting up controller.. ");
 
 	/* lock overcurrent map */
-	reg32 = pci_read_config32(dev, 0x44);
+	reg32 = x86_pci_read_config32(dev, 0x44);
 	reg32 |= 1;
-	pci_write_config32(dev, 0x44, reg32);
+	x86_pci_write_config32(dev, 0x44, reg32);
 
 	/* Enable clock gating */
-	reg32 = pci_read_config32(dev, 0x40);
+	reg32 = x86_pci_read_config32(dev, 0x40);
 	reg32 &= ~((1 << 20) | (1 << 21));
 	reg32 |= (1 << 19) | (1 << 18) | (1 << 17);
 	reg32 |= (1 << 10) | (1 << 9) | (1 << 8);
 	reg32 |= (1 << 31); /* lock */
-	pci_write_config32(dev, 0x40, reg32);
+	x86_pci_write_config32(dev, 0x40, reg32);
 
 	debug("done.\n");
 }
diff --git a/arch/x86/cpu/pci.c b/arch/x86/cpu/pci.c
index ab1aaaa059..c6c5267ed2 100644
--- a/arch/x86/cpu/pci.c
+++ b/arch/x86/cpu/pci.c
@@ -70,7 +70,7 @@ static struct pci_controller *get_hose(void)
 	return pci_bus_to_hose(0);
 }
 
-unsigned int pci_read_config8(pci_dev_t dev, unsigned where)
+unsigned int x86_pci_read_config8(pci_dev_t dev, unsigned where)
 {
 	uint8_t value;
 
@@ -79,7 +79,7 @@ unsigned int pci_read_config8(pci_dev_t dev, unsigned where)
 	return value;
 }
 
-unsigned int pci_read_config16(pci_dev_t dev, unsigned where)
+unsigned int x86_pci_read_config16(pci_dev_t dev, unsigned where)
 {
 	uint16_t value;
 
@@ -88,7 +88,7 @@ unsigned int pci_read_config16(pci_dev_t dev, unsigned where)
 	return value;
 }
 
-unsigned int pci_read_config32(pci_dev_t dev, unsigned where)
+unsigned int x86_pci_read_config32(pci_dev_t dev, unsigned where)
 {
 	uint32_t value;
 
@@ -97,17 +97,17 @@ unsigned int pci_read_config32(pci_dev_t dev, unsigned where)
 	return value;
 }
 
-void pci_write_config8(pci_dev_t dev, unsigned where, unsigned value)
+void x86_pci_write_config8(pci_dev_t dev, unsigned where, unsigned value)
 {
 	pci_hose_write_config_byte(get_hose(), dev, where, value);
 }
 
-void pci_write_config16(pci_dev_t dev, unsigned where, unsigned value)
+void x86_pci_write_config16(pci_dev_t dev, unsigned where, unsigned value)
 {
 	pci_hose_write_config_word(get_hose(), dev, where, value);
 }
 
-void pci_write_config32(pci_dev_t dev, unsigned where, unsigned value)
+void x86_pci_write_config32(pci_dev_t dev, unsigned where, unsigned value)
 {
 	pci_hose_write_config_dword(get_hose(), dev, where, value);
 }
diff --git a/arch/x86/cpu/quark/quark.c b/arch/x86/cpu/quark/quark.c
index 25edcf71cb..e4b19c2759 100644
--- a/arch/x86/cpu/quark/quark.c
+++ b/arch/x86/cpu/quark/quark.c
@@ -30,9 +30,9 @@ static void unprotect_spi_flash(void)
 {
 	u32 bc;
 
-	bc = pci_read_config32(QUARK_LEGACY_BRIDGE, 0xd8);
+	bc = x86_pci_read_config32(QUARK_LEGACY_BRIDGE, 0xd8);
 	bc |= 0x1;	/* unprotect the flash */
-	pci_write_config32(QUARK_LEGACY_BRIDGE, 0xd8, bc);
+	x86_pci_write_config32(QUARK_LEGACY_BRIDGE, 0xd8, bc);
 }
 
 static void quark_setup_bars(void)
diff --git a/arch/x86/cpu/queensbay/tnc.c b/arch/x86/cpu/queensbay/tnc.c
index 30ab725bb9..b7236e7b60 100644
--- a/arch/x86/cpu/queensbay/tnc.c
+++ b/arch/x86/cpu/queensbay/tnc.c
@@ -16,9 +16,9 @@ static void unprotect_spi_flash(void)
 {
 	u32 bc;
 
-	bc = pci_read_config32(PCH_LPC_DEV, 0xd8);
+	bc = x86_pci_read_config32(PCH_LPC_DEV, 0xd8);
 	bc |= 0x1;	/* unprotect the flash */
-	pci_write_config32(PCH_LPC_DEV, 0xd8, bc);
+	x86_pci_write_config32(PCH_LPC_DEV, 0xd8, bc);
 }
 
 int arch_cpu_init(void)
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index a153dd1622..b277b3d8fd 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -48,13 +48,13 @@ int board_pci_post_scan(struct pci_controller *hose);
  * Simple PCI access routines - these work from either the early PCI hose
  * or the 'real' one, created after U-Boot has memory available
  */
-unsigned int pci_read_config8(pci_dev_t dev, unsigned where);
-unsigned int pci_read_config16(pci_dev_t dev, unsigned where);
-unsigned int pci_read_config32(pci_dev_t dev, unsigned where);
+unsigned int x86_pci_read_config8(pci_dev_t dev, unsigned where);
+unsigned int x86_pci_read_config16(pci_dev_t dev, unsigned where);
+unsigned int x86_pci_read_config32(pci_dev_t dev, unsigned where);
 
-void pci_write_config8(pci_dev_t dev, unsigned where, unsigned value);
-void pci_write_config16(pci_dev_t dev, unsigned where, unsigned value);
-void pci_write_config32(pci_dev_t dev, unsigned where, unsigned value);
+void x86_pci_write_config8(pci_dev_t dev, unsigned where, unsigned value);
+void x86_pci_write_config16(pci_dev_t dev, unsigned where, unsigned value);
+void x86_pci_write_config32(pci_dev_t dev, unsigned where, unsigned value);
 
 #endif /* __ASSEMBLY__ */
 
diff --git a/arch/x86/lib/bios_interrupts.c b/arch/x86/lib/bios_interrupts.c
index b0e2ecbbca..290990a8bd 100644
--- a/arch/x86/lib/bios_interrupts.c
+++ b/arch/x86/lib/bios_interrupts.c
@@ -172,28 +172,28 @@ int int1a_handler(void)
 		}
 		switch (func) {
 		case 0xb108: /* Read Config Byte */
-			byte = pci_read_config8(dev, reg);
+			byte = x86_pci_read_config8(dev, reg);
 			M.x86.R_ECX = byte;
 			break;
 		case 0xb109: /* Read Config Word */
-			word = pci_read_config16(dev, reg);
+			word = x86_pci_read_config16(dev, reg);
 			M.x86.R_ECX = word;
 			break;
 		case 0xb10a: /* Read Config Dword */
-			dword = pci_read_config32(dev, reg);
+			dword = x86_pci_read_config32(dev, reg);
 			M.x86.R_ECX = dword;
 			break;
 		case 0xb10b: /* Write Config Byte */
 			byte = M.x86.R_ECX;
-			pci_write_config8(dev, reg, byte);
+			x86_pci_write_config8(dev, reg, byte);
 			break;
 		case 0xb10c: /* Write Config Word */
 			word = M.x86.R_ECX;
-			pci_write_config16(dev, reg, word);
+			x86_pci_write_config16(dev, reg, word);
 			break;
 		case 0xb10d: /* Write Config Dword */
 			dword = M.x86.R_ECX;
-			pci_write_config32(dev, reg, dword);
+			x86_pci_write_config32(dev, reg, dword);
 			break;
 		}