powerpc/mpc85xx: Add BSC9132/BSC9232 processor support

The BSC9132 is a highly integrated device that targets the evolving
 Microcell, Picocell, and Enterprise-Femto base station market subsegments.

 The BSC9132 device combines Power Architecture e500 and DSP StarCore SC3850
 core technologies with MAPLE-B2P baseband acceleration processing elements
 to address the need for a high performance, low cost, integrated solution
 that handles all required processing layers without the need for an
 external device except for an RF transceiver or, in a Micro base station
 configuration, a host device that handles the L3/L4 and handover between
 sectors.

 The BSC9132 SoC includes the following function and features:
    - Power Architecture subsystem including two e500 processors with
	512-Kbyte shared L2 cache
    - Two StarCore SC3850 DSP subsystems, each with a 512-Kbyte private L2
	cache
    - 32 Kbyte of shared M3 memory
    - The Multi Accelerator Platform Engine for Pico BaseStation Baseband
      Processing (MAPLE-B2P)
    - Two DDR3/3L memory interfaces with 32-bit data width (40 bits including
      ECC), up to 1333 MHz data rate
    - Dedicated security engine featuring trusted boot
    - Two DMA controllers
         - OCNDMA with four bidirectional channels
         - SysDMA with sixteen bidirectional channels
    - Interfaces
        - Four-lane SerDes PHY
	    - PCI Express controller complies with the PEX Specification-Rev 2.0
        - Two Common Public Radio Interface (CPRI) controller lanes
	    - High-speed USB 2.0 host and device controller with ULPI interface
        - Enhanced secure digital (SD/MMC) host controller (eSDHC)
	    - Antenna interface controller (AIC), supporting four industry
		standard JESD207/four custom ADI RF interfaces
       - ADI lanes support both full duplex FDD support & half duplex TDD
       - Universal Subscriber Identity Module (USIM) interface that
	   facilitates communication to SIM cards or Eurochip pre-paid phone
	   cards
       - Two DUART, two eSPI, and two I2C controllers
       - Integrated Flash memory controller (IFC)
       - GPIO
     - Sixteen 32-bit timers

Signed-off-by: Naveen Burmi <NaveenBurmi@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

2 files changed, 98 insertions, 0 deletions

diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index 95994d38d6..6776c85e49 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -86,6 +86,7 @@ COBJS-$(CONFIG_PPC_T4240)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_B4420)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_B4860)	+= ddr-gen3.o
 COBJS-$(CONFIG_BSC9131)		+= ddr-gen3.o
+COBJS-$(CONFIG_BSC9132)		+= ddr-gen3.o
 
 COBJS-$(CONFIG_CPM2)	+= ether_fcc.o
 COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
@@ -138,6 +139,7 @@ COBJS-$(CONFIG_PPC_P5040) += p5040_serdes.o
 COBJS-$(CONFIG_PPC_T4240) += t4240_serdes.o
 COBJS-$(CONFIG_PPC_B4420) += b4860_serdes.o
 COBJS-$(CONFIG_PPC_B4860) += b4860_serdes.o
+COBJS-$(CONFIG_BSC9132) += bsc9132_serdes.o
 
 COBJS-y	+= cpu.o
 COBJS-y	+= cpu_init.o
diff --git a/arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c b/arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c
new file mode 100644
index 0000000000..300a4dbcf6
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ * Author: Prabhakar Kushwaha <prabhakar@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/io.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_serdes.h>
+
+#define SRDS1_MAX_LANES		4
+
+static u32 serdes1_prtcl_map;
+
+static u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = {
+	 [0] = {NONE, NONE, NONE, NONE},
+	 [1] = {PCIE1, PCIE2, CPRI2, CPRI1},
+	 [2] = {PCIE1, PCIE2, CPRI2, CPRI1},
+	 [3] = {PCIE1, PCIE2, CPRI2, CPRI1},
+	 [4] = {PCIE1, PCIE2, CPRI2, CPRI1},
+	 [5] = {PCIE1, PCIE2, CPRI2, CPRI1},
+	 [6] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+	 [7] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+	 [8] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+	 [9] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+	[10] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+	[11] = {PCIE1, PCIE2, SGMII_TSEC1, SGMII_TSEC2},
+	[12] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+	[13] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+	[14] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+	[15] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+	[16] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+	[17] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+	[18] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+	[19] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+	[20] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+	[21] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+	[22] = {PCIE1, PCIE2, CPRI2, CPRI1},
+	[23] = {PCIE1, PCIE2, CPRI2, CPRI1},
+	[24] = {PCIE1, PCIE2, CPRI2, CPRI1},
+	[25] = {PCIE1, PCIE2, CPRI2, CPRI1},
+	[26] = {PCIE1, PCIE2, CPRI2, CPRI1},
+	[27] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+	[28] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+	[29] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+	[30] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+	[31] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+	[32] = {PCIE1, PCIE2, SGMII_TSEC1, SGMII_TSEC2},
+	[33] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+	[34] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+	[35] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+	[36] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+	[37] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+	[38] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+	[39] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+	[40] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+	[41] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+	[42] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+	[43] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1},
+	[44] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1},
+	[45] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1},
+	[46] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1},
+	[47] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1},
+};
+
+int is_serdes_configured(enum srds_prtcl prtcl)
+{
+	return (1 << prtcl) & serdes1_prtcl_map;
+}
+
+void fsl_serdes_init(void)
+{
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 pordevsr = in_be32(&gur->pordevsr);
+	u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
+				MPC85xx_PORDEVSR_IO_SEL_SHIFT;
+	int lane;
+
+	debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
+
+	if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) {
+		printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
+		return;
+	}
+
+	for (lane = 0; lane < SRDS1_MAX_LANES; lane++) {
+		enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane];
+		serdes1_prtcl_map |= (1 << lane_prtcl);
+	}
+}