ARM: keystone2: use SPD info to configure K2HK and K2E DDR3

This commit replaces hard-coded EMIF and PHY DDR3 configurations for
predefined SODIMMs to a calculated configuration. The SODIMM parameters
are read from SODIMM's SPD and used to calculated the configuration.

The current commit supports calculation for DDR3 with 1600MHz and 1333MHz
only.

Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

3 files changed, 463 insertions, 0 deletions

diff --git a/arch/arm/mach-keystone/Makefile b/arch/arm/mach-keystone/Makefile
index ffd9eadb0a..9713fe4d68 100644
--- a/arch/arm/mach-keystone/Makefile
+++ b/arch/arm/mach-keystone/Makefile
@@ -13,3 +13,5 @@ obj-y	+= cmd_mon.o
 obj-y	+= msmc.o
 obj-y	+= ddr3.o cmd_ddr3.o
 obj-y	+= keystone.o
+obj-$(CONFIG_K2E_EVM) += ddr3_spd.o
+obj-$(CONFIG_K2HK_EVM) += ddr3_spd.o
diff --git a/arch/arm/mach-keystone/ddr3_spd.c b/arch/arm/mach-keystone/ddr3_spd.c
new file mode 100644
index 0000000000..e5018c9eb6
--- /dev/null
+++ b/arch/arm/mach-keystone/ddr3_spd.c
@@ -0,0 +1,453 @@
+/*
+ * Keystone2: DDR3 SPD configuration
+ *
+ * (C) Copyright 2015-2016 Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+
+#include <i2c.h>
+#include <ddr_spd.h>
+#include <asm/arch/ddr3.h>
+#include <asm/arch/hardware.h>
+
+#define DUMP_DDR_CONFIG			0	/* set to 1 to debug */
+#define debug_ddr_cfg(fmt, args...)					\
+		   debug_cond(DUMP_DDR_CONFIG, fmt, ##args)
+
+static void dump_phy_config(struct ddr3_phy_config *ptr)
+{
+	debug_ddr_cfg("\npllcr		0x%08X\n", ptr->pllcr);
+	debug_ddr_cfg("pgcr1_mask	0x%08X\n", ptr->pgcr1_mask);
+	debug_ddr_cfg("pgcr1_val	0x%08X\n", ptr->pgcr1_val);
+	debug_ddr_cfg("ptr0		0x%08X\n", ptr->ptr0);
+	debug_ddr_cfg("ptr1		0x%08X\n", ptr->ptr1);
+	debug_ddr_cfg("ptr2		0x%08X\n", ptr->ptr2);
+	debug_ddr_cfg("ptr3		0x%08X\n", ptr->ptr3);
+	debug_ddr_cfg("ptr4		0x%08X\n", ptr->ptr4);
+	debug_ddr_cfg("dcr_mask		0x%08X\n", ptr->dcr_mask);
+	debug_ddr_cfg("dcr_val		0x%08X\n", ptr->dcr_val);
+	debug_ddr_cfg("dtpr0		0x%08X\n", ptr->dtpr0);
+	debug_ddr_cfg("dtpr1		0x%08X\n", ptr->dtpr1);
+	debug_ddr_cfg("dtpr2		0x%08X\n", ptr->dtpr2);
+	debug_ddr_cfg("mr0		0x%08X\n", ptr->mr0);
+	debug_ddr_cfg("mr1		0x%08X\n", ptr->mr1);
+	debug_ddr_cfg("mr2		0x%08X\n", ptr->mr2);
+	debug_ddr_cfg("dtcr		0x%08X\n", ptr->dtcr);
+	debug_ddr_cfg("pgcr2		0x%08X\n", ptr->pgcr2);
+	debug_ddr_cfg("zq0cr1		0x%08X\n", ptr->zq0cr1);
+	debug_ddr_cfg("zq1cr1		0x%08X\n", ptr->zq1cr1);
+	debug_ddr_cfg("zq2cr1		0x%08X\n", ptr->zq2cr1);
+	debug_ddr_cfg("pir_v1		0x%08X\n", ptr->pir_v1);
+	debug_ddr_cfg("pir_v2		0x%08X\n\n", ptr->pir_v2);
+};
+
+static void dump_emif_config(struct ddr3_emif_config *ptr)
+{
+	debug_ddr_cfg("\nsdcfg		0x%08X\n", ptr->sdcfg);
+	debug_ddr_cfg("sdtim1		0x%08X\n", ptr->sdtim1);
+	debug_ddr_cfg("sdtim2		0x%08X\n", ptr->sdtim2);
+	debug_ddr_cfg("sdtim3		0x%08X\n", ptr->sdtim3);
+	debug_ddr_cfg("sdtim4		0x%08X\n", ptr->sdtim4);
+	debug_ddr_cfg("zqcfg		0x%08X\n", ptr->zqcfg);
+	debug_ddr_cfg("sdrfc		0x%08X\n\n", ptr->sdrfc);
+};
+
+#define TEMP NORMAL_TEMP
+#define VBUS_CLKPERIOD 1.875 /* Corresponds to vbus=533MHz, */
+#define PLLGS_VAL	(4000.0 / VBUS_CLKPERIOD) /* 4 us */
+#define PLLPD_VAL	(1000.0 / VBUS_CLKPERIOD) /* 1 us */
+#define PLLLOCK_VAL	(100000.0 / VBUS_CLKPERIOD) /* 100 us */
+#define PLLRST_VAL	(9000.0 / VBUS_CLKPERIOD) /* 9 us */
+#define PHYRST_VAL	0x10
+#define DDR_TERM RZQ_4_TERM
+#define SDRAM_DRIVE RZQ_7_IMP
+#define DYN_ODT ODT_DISABLE
+
+enum srt {
+	NORMAL_TEMP,
+	EXTENDED_TEMP
+};
+
+enum out_impedance {
+	RZQ_6_IMP = 0,
+	RZQ_7_IMP
+};
+
+enum die_term {
+	ODT_DISABLE = 0,
+	RZQ_4_TERM,
+	RZQ_2_TERM,
+	RZQ_6_TERM,
+	RZQ_12_TERM,
+	RZQ_8_TERM
+};
+
+struct ddr3_sodimm {
+	u32 t_ck;
+	u32 freqsel;
+	u32 t_xp;
+	u32 t_cke;
+	u32 t_pllpd;
+	u32 t_pllgs;
+	u32 t_phyrst;
+	u32 t_plllock;
+	u32 t_pllrst;
+	u32 t_rfc;
+	u32 t_xs;
+	u32 t_dinit0;
+	u32 t_dinit1;
+	u32 t_dinit2;
+	u32 t_dinit3;
+	u32 t_rtp;
+	u32 t_wtr;
+	u32 t_rp;
+	u32 t_rcd;
+	u32 t_ras;
+	u32 t_rrd;
+	u32 t_rc;
+	u32 t_faw;
+	u32 t_mrd;
+	u32 t_mod;
+	u32 t_wlo;
+	u32 t_wlmrd;
+	u32 t_xsdll;
+	u32 t_xpdll;
+	u32 t_ckesr;
+	u32 t_dllk;
+	u32 t_wr;
+	u32 t_wr_bin;
+	u32 cas;
+	u32 cwl;
+	u32 asr;
+	u32 pasr;
+	u32 t_refprd;
+	u8 sdram_type;
+	u8 ibank;
+	u8 pagesize;
+	u8 t_rrd2;
+	u8 t_ras_max;
+	u8 t_zqcs;
+	u32 refresh_rate;
+	u8 t_csta;
+
+	u8 rank;
+	u8 mirrored;
+	u8 buswidth;
+};
+
+static u8 cas_latancy(u16 temp)
+{
+	int loop;
+	u8 cas_bin = 0;
+
+	for (loop = 0; loop < 32; loop += 2, temp >>= 1) {
+		if (temp & 0x0001)
+			cas_bin = (loop > 15) ? loop - 15 : loop;
+	}
+
+	return cas_bin;
+}
+
+static int ddr3_get_size_in_mb(ddr3_spd_eeprom_t *buf)
+{
+	return (((buf->organization & 0x38) >> 3) + 1) *
+		(256 << (buf->density_banks & 0xf));
+}
+
+static int ddrtimingcalculation(ddr3_spd_eeprom_t *buf, struct ddr3_sodimm *spd,
+				struct ddr3_spd_cb *spd_cb)
+{
+	u32 mtb, clk_freq;
+
+	if ((buf->mem_type != 0x0b) ||
+	    ((buf->density_banks & 0x70) != 0x00))
+		return 1;
+
+	spd->sdram_type = 0x03;
+	spd->ibank = 0x03;
+
+	mtb = buf->mtb_dividend * 1000 / buf->mtb_divisor;
+
+	spd->t_ck = buf->tck_min * mtb;
+
+	spd_cb->ddrspdclock = 2000000 / spd->t_ck;
+	clk_freq = spd_cb->ddrspdclock / 2;
+
+	spd->rank = ((buf->organization & 0x38) >> 3) + 1;
+	if (spd->rank > 2)
+		return 1;
+
+	spd->pagesize = (buf->addressing & 0x07) + 1;
+	if (spd->pagesize > 3)
+		return 1;
+
+	spd->buswidth = 8 << (buf->bus_width & 0x7);
+	if ((spd->buswidth < 16) || (spd->buswidth > 64))
+		return 1;
+
+	spd->mirrored = buf->mod_section.unbuffered.addr_mapping & 1;
+
+	printf("DDR3A Speed will be configured for %d Operation.\n",
+	       spd_cb->ddrspdclock);
+	if (spd_cb->ddrspdclock == 1333) {
+		spd->t_xp = ((3 * spd->t_ck) > 6000) ?
+			3 : ((5999 / spd->t_ck) + 1);
+		spd->t_cke = ((3 * spd->t_ck) > 5625) ?
+			3 : ((5624 / spd->t_ck) + 1);
+	} else if (spd_cb->ddrspdclock == 1600) {
+		spd->t_xp = ((3 * spd->t_ck) > 6000) ?
+			3 : ((5999 / spd->t_ck) + 1);
+		spd->t_cke = ((3 * spd->t_ck) > 5000) ?
+			3 : ((4999 / spd->t_ck) + 1);
+	} else {
+		printf("Unsupported DDR3 speed %d\n", spd_cb->ddrspdclock);
+		return 1;
+	}
+
+	spd->t_xpdll = (spd->t_ck > 2400) ? 10 : 24000 / spd->t_ck;
+	spd->t_ckesr = spd->t_cke + 1;
+
+	/* SPD Calculated Values */
+	spd->cas = cas_latancy((buf->caslat_msb << 8) |
+			       buf->caslat_lsb);
+
+	spd->t_wr = (buf->twr_min * mtb) / spd->t_ck;
+	spd->t_wr_bin = (spd->t_wr / 2) & 0x07;
+
+	spd->t_rcd = ((buf->trcd_min * mtb) - 1) / spd->t_ck + 1;
+	spd->t_rrd = ((buf->trrd_min * mtb) - 1) / spd->t_ck + 1;
+	spd->t_rp  = (((buf->trp_min * mtb) - 1) / spd->t_ck) + 1;
+
+	spd->t_ras = (((buf->tras_trc_ext & 0x0f) << 8 | buf->tras_min_lsb) *
+		      mtb) / spd->t_ck;
+
+	spd->t_rc = (((((buf->tras_trc_ext & 0xf0) << 4) | buf->trc_min_lsb) *
+		      mtb) - 1) / spd->t_ck + 1;
+
+	spd->t_rfc = (buf->trfc_min_lsb | (buf->trfc_min_msb << 8)) * mtb /
+		1000;
+	spd->t_wtr = (buf->twtr_min * mtb) / spd->t_ck;
+	spd->t_rtp = (buf->trtp_min * mtb) / spd->t_ck;
+
+	spd->t_xs  = (((spd->t_rfc + 10) * 1000) / spd->t_ck);
+	spd->t_rfc = ((spd->t_rfc * 1000) - 1) / spd->t_ck + 1;
+
+	spd->t_faw = (((buf->tfaw_msb << 8) | buf->tfaw_min) * mtb) / spd->t_ck;
+	spd->t_rrd2 = ((((buf->tfaw_msb << 8) |
+			 buf->tfaw_min) * mtb) / (4 * spd->t_ck)) - 1;
+
+	/* Hard-coded values */
+	spd->t_mrd = 0x00;
+	spd->t_mod = 0x00;
+	spd->t_wlo = 0x0C;
+	spd->t_wlmrd = 0x28;
+	spd->t_xsdll = 0x200;
+	spd->t_ras_max = 0x0F;
+	spd->t_csta = 0x05;
+	spd->t_dllk = 0x200;
+
+	/* CAS Write Latency */
+	if (spd->t_ck >= 2500)
+		spd->cwl = 0;
+	else if (spd->t_ck >= 1875)
+		spd->cwl = 1;
+	else if (spd->t_ck >= 1500)
+		spd->cwl = 2;
+	else if (spd->t_ck >= 1250)
+		spd->cwl = 3;
+	else if (spd->t_ck >= 1071)
+		spd->cwl = 4;
+	else
+		spd->cwl = 5;
+
+	/* SD:RAM Thermal and Refresh Options */
+	spd->asr = (buf->therm_ref_opt & 0x04) >> 2;
+	spd->pasr = (buf->therm_ref_opt & 0x80) >> 7;
+	spd->t_zqcs = 64;
+
+	spd->t_refprd = (TEMP == NORMAL_TEMP) ? 7812500 : 3906250;
+	spd->t_refprd = spd->t_refprd / spd->t_ck;
+
+	spd->refresh_rate = spd->t_refprd;
+	spd->t_refprd = spd->t_refprd * 5;
+
+	/* Set MISC PHY space registers fields */
+	if ((clk_freq / 2) >= 166 && (clk_freq / 2 < 275))
+		spd->freqsel = 0x03;
+	else if ((clk_freq / 2) > 225 && (clk_freq / 2 < 385))
+		spd->freqsel = 0x01;
+	else if ((clk_freq / 2) > 335 && (clk_freq / 2 < 534))
+		spd->freqsel = 0x00;
+
+	spd->t_dinit0 = 500000000 / spd->t_ck; /* CKE low time 500 us */
+	spd->t_dinit1 = spd->t_xs;
+	spd->t_dinit2 = 200000000 / spd->t_ck; /* Reset low time 200 us */
+	/* Time from ZQ initialization command to first command (1 us) */
+	spd->t_dinit3 =  1000000 / spd->t_ck;
+
+	spd->t_pllgs = PLLGS_VAL + 1;
+	spd->t_pllpd = PLLPD_VAL + 1;
+	spd->t_plllock = PLLLOCK_VAL + 1;
+	spd->t_pllrst = PLLRST_VAL;
+	spd->t_phyrst = PHYRST_VAL;
+
+	spd_cb->ddr_size_gbyte = ddr3_get_size_in_mb(buf) / 1024;
+
+	return 0;
+}
+
+static void init_ddr3param(struct ddr3_spd_cb *spd_cb,
+			   struct ddr3_sodimm *spd)
+{
+	spd_cb->phy_cfg.pllcr = (spd->freqsel & 3) << 18 | 0xE << 13;
+	spd_cb->phy_cfg.pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK);
+	spd_cb->phy_cfg.pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23));
+	spd_cb->phy_cfg.ptr0 = ((spd->t_pllpd & 0x7ff) << 21) |
+		((spd->t_pllgs & 0x7fff) << 6) | (spd->t_phyrst & 0x3f);
+	spd_cb->phy_cfg.ptr1 = ((spd->t_plllock & 0xffff) << 16) |
+		(spd->t_pllrst & 0x1fff);
+	spd_cb->phy_cfg.ptr2 = 0;
+	spd_cb->phy_cfg.ptr3 = ((spd->t_dinit1 & 0x1ff) << 20) |
+		(spd->t_dinit0 & 0xfffff);
+	spd_cb->phy_cfg.ptr4 = ((spd->t_dinit3 & 0x3ff) << 18) |
+		(spd->t_dinit2 & 0x3ffff);
+
+	spd_cb->phy_cfg.dcr_mask = PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK;
+	spd_cb->phy_cfg.dcr_val = 1 << 10;
+
+	if (spd->mirrored) {
+		spd_cb->phy_cfg.dcr_mask |= NOSRA_MASK | UDIMM_MASK;
+		spd_cb->phy_cfg.dcr_val |= (1 << 27) | (1 << 29);
+	}
+
+	spd_cb->phy_cfg.dtpr0 = (spd->t_rc & 0x3f) << 26 |
+		(spd->t_rrd & 0xf) << 22 |
+		(spd->t_ras & 0x3f) << 16 | (spd->t_rcd & 0xf) << 12 |
+		(spd->t_rp & 0xf) << 8 | (spd->t_wtr & 0xf) << 4 |
+		(spd->t_rtp & 0xf);
+	spd_cb->phy_cfg.dtpr1 = (spd->t_wlo & 0xf) << 26 |
+		(spd->t_wlmrd & 0x3f) << 20 | (spd->t_rfc & 0x1ff) << 11 |
+		(spd->t_faw & 0x3f) << 5 | (spd->t_mod & 0x7) << 2 |
+		(spd->t_mrd & 0x3);
+
+	spd_cb->phy_cfg.dtpr2 = 0 << 31 | 1 << 30 | 0 << 29 |
+		(spd->t_dllk & 0x3ff) << 19 | (spd->t_ckesr & 0xf) << 15;
+
+	spd_cb->phy_cfg.dtpr2 |= (((spd->t_xp > spd->t_xpdll) ?
+				   spd->t_xp : spd->t_xpdll) &
+				  0x1f) << 10;
+
+	spd_cb->phy_cfg.dtpr2 |= (((spd->t_xs > spd->t_xsdll) ?
+			      spd->t_xs : spd->t_xsdll) &
+			     0x3ff);
+
+	spd_cb->phy_cfg.mr0 = 1 << 12 | (spd->t_wr_bin & 0x7) << 9 | 0 << 8 |
+		0 << 7 | ((spd->cas & 0x0E) >> 1) << 4 | 0 << 3 |
+		(spd->cas & 0x01) << 2;
+
+	spd_cb->phy_cfg.mr1 = 0 << 12 | 0 << 11 | 0 << 7 | 0 << 3 |
+		((DDR_TERM >> 2) & 1) << 9 | ((DDR_TERM >> 1) & 1) << 6 |
+		(DDR_TERM & 0x1) << 2 | ((SDRAM_DRIVE >> 1) & 1) << 5 |
+		(SDRAM_DRIVE & 1) << 1 | 0 << 0;
+
+	spd_cb->phy_cfg.mr2 = DYN_ODT << 9 | TEMP << 7 | (spd->asr & 1) << 6 |
+		(spd->cwl & 7) << 3 | (spd->pasr & 7);
+
+	spd_cb->phy_cfg.dtcr = (spd->rank == 2) ? 0x730035C7 : 0x710035C7;
+	spd_cb->phy_cfg.pgcr2 = (0xF << 20) | ((int)spd->t_refprd & 0x3ffff);
+
+	spd_cb->phy_cfg.zq0cr1 = 0x0000005D;
+	spd_cb->phy_cfg.zq1cr1 = 0x0000005B;
+	spd_cb->phy_cfg.zq2cr1 = 0x0000005B;
+
+	spd_cb->phy_cfg.pir_v1 = 0x00000033;
+	spd_cb->phy_cfg.pir_v2 = 0x0000FF81;
+
+	/* EMIF Registers */
+	spd_cb->emif_cfg.sdcfg = spd->sdram_type << 29 | (DDR_TERM & 7) << 25 |
+		(DYN_ODT & 3) << 22 | (spd->cwl & 0x7) << 14 |
+		(spd->cas & 0xf) << 8 | (spd->ibank & 3) << 5 |
+		(spd->buswidth & 3) << 12 | (spd->pagesize & 3);
+
+	if (spd->rank == 2)
+		spd_cb->emif_cfg.sdcfg |= 1 << 3;
+
+	spd_cb->emif_cfg.sdtim1 = ((spd->t_wr - 1) & 0x1f) << 25 |
+		((spd->t_ras - 1) & 0x7f) << 18 |
+		((spd->t_rc - 1) & 0xff) << 10 |
+		(spd->t_rrd2 & 0x3f) << 4  |
+		((spd->t_wtr - 1) & 0xf);
+
+	spd_cb->emif_cfg.sdtim2 = 0x07 << 10 | ((spd->t_rp - 1) & 0x1f) << 5 |
+		((spd->t_rcd - 1) & 0x1f);
+
+	spd_cb->emif_cfg.sdtim3 = ((spd->t_xp - 2) & 0xf) << 28 |
+		((spd->t_xs - 1) & 0x3ff) << 18 |
+		((spd->t_xsdll - 1) & 0x3ff) << 8 |
+		((spd->t_rtp - 1) & 0xf) << 4 | ((spd->t_cke) & 0xf);
+
+	spd_cb->emif_cfg.sdtim4 = (spd->t_csta & 0xf) << 28 |
+		((spd->t_ckesr - 1) & 0xf) << 24 |
+		((spd->t_zqcs - 1) & 0xff) << 16 |
+		((spd->t_rfc - 1) & 0x3ff) << 4 |
+		(spd->t_ras_max & 0xf);
+
+	spd_cb->emif_cfg.sdrfc = (spd->refresh_rate - 1) & 0xffff;
+
+	/* TODO zqcfg value fixed ,May be required correction for K2E evm. */
+	spd_cb->emif_cfg.zqcfg = (spd->rank == 2) ? 0xF0073200 : 0x70073200;
+}
+
+static int ddr3_read_spd(ddr3_spd_eeprom_t *spd_params)
+{
+	int ret;
+	int old_bus;
+
+	i2c_init(CONFIG_SYS_DAVINCI_I2C_SPEED, CONFIG_SYS_DAVINCI_I2C_SLAVE);
+
+	old_bus = i2c_get_bus_num();
+	i2c_set_bus_num(1);
+
+	ret = i2c_read(0x53, 0, 1, (unsigned char *)spd_params, 256);
+
+	i2c_set_bus_num(old_bus);
+
+	if (ret) {
+		printf("Cannot read DIMM params\n");
+		return 1;
+	}
+
+	if (ddr3_spd_check(spd_params))
+		return 1;
+
+	return 0;
+}
+
+int ddr3_get_dimm_params_from_spd(struct ddr3_spd_cb *spd_cb)
+{
+	struct ddr3_sodimm spd;
+	ddr3_spd_eeprom_t spd_params;
+
+	memset(&spd, 0, sizeof(spd));
+
+	if (ddr3_read_spd(&spd_params))
+		return 1;
+
+	if (ddrtimingcalculation(&spd_params, &spd, spd_cb)) {
+		printf("Timing caclulation error\n");
+		return 1;
+	}
+
+	strncpy(spd_cb->dimm_name, (char *)spd_params.mpart, 18);
+	spd_cb->dimm_name[18] = '\0';
+
+	init_ddr3param(spd_cb, &spd);
+
+	dump_emif_config(&spd_cb->emif_cfg);
+	dump_phy_config(&spd_cb->phy_cfg);
+
+	return 0;
+}
diff --git a/arch/arm/mach-keystone/include/mach/ddr3.h b/arch/arm/mach-keystone/include/mach/ddr3.h
index a22c237c80..68d3cb4245 100644
--- a/arch/arm/mach-keystone/include/mach/ddr3.h
+++ b/arch/arm/mach-keystone/include/mach/ddr3.h
@@ -48,6 +48,14 @@ struct ddr3_emif_config {
 	unsigned int sdrfc;
 };
 
+struct ddr3_spd_cb {
+	char   dimm_name[32];
+	struct ddr3_phy_config phy_cfg;
+	struct ddr3_emif_config emif_cfg;
+	unsigned int ddrspdclock;
+	int    ddr_size_gbyte;
+};
+
 u32 ddr3_init(void);
 void ddr3_reset_ddrphy(void);
 void ddr3_init_ecc(u32 base, u32 ddr3_size);