usb: omap: Move the xhci-omap header file to common location

Moving the xhci-omap header to a more global location so that
other code can reference this code.

Signed-off-by: Dan Murphy <dmurphy@ti.com>

1 files changed, 0 insertions, 124 deletions

diff --git a/arch/arm/include/asm/arch-omap5/xhci-omap.h b/arch/arm/include/asm/arch-omap5/xhci-omap.h
deleted file mode 100644
index b557a434d2..0000000000
--- a/arch/arm/include/asm/arch-omap5/xhci-omap.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * (C) Copyright 2013
- * Texas Instruments Inc, <www.ti.com>
- *
- * Author: Dan Murphy <dmurphy@ti.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _ASM_ARCH_XHCI_OMAP_H_
-#define _ASM_ARCH_XHCI_OMAP_H_
-
-#define OMAP_XHCI_BASE 0x4a030000
-#define OMAP_OCP1_SCP_BASE 0x4a084c00
-#define OMAP_OTG_WRAPPER_BASE 0x4A020000
-
-/* Phy register MACRO definitions */
-#define	PLL_REGM_MASK		0x001FFE00
-#define	PLL_REGM_SHIFT		0x9
-#define	PLL_REGM_F_MASK		0x0003FFFF
-#define	PLL_REGM_F_SHIFT	0x0
-#define	PLL_REGN_MASK		0x000001FE
-#define	PLL_REGN_SHIFT		0x1
-#define	PLL_SELFREQDCO_MASK	0x0000000E
-#define	PLL_SELFREQDCO_SHIFT	0x1
-#define	PLL_SD_MASK		0x0003FC00
-#define	PLL_SD_SHIFT		0x9
-#define	SET_PLL_GO		0x1
-#define	PLL_TICOPWDN		0x10000
-#define	PLL_LOCK		0x2
-#define	PLL_IDLE		0x1
-
-#define USB3_PWRCTL_CLK_CMD_MASK	0x3FE000
-#define USB3_PWRCTL_CLK_FREQ_MASK	0xFFC
-#define USB3_PHY_PARTIAL_RX_POWERON     (1 << 6)
-#define USB3_PHY_RX_POWERON		(1 << 14)
-#define USB3_PHY_TX_POWERON		(1 << 15)
-#define USB3_PHY_TX_RX_POWERON	(USB3_PHY_RX_POWERON | USB3_PHY_TX_POWERON)
-#define USB3_PWRCTL_CLK_CMD_SHIFT   14
-#define USB3_PWRCTL_CLK_FREQ_SHIFT	22
-
-/* USBOTGSS_WRAPPER definitions */
-#define USBOTGSS_WRAPRESET	(1 << 17)
-#define USBOTGSS_DMADISABLE (1 << 16)
-#define USBOTGSS_STANDBYMODE_NO_STANDBY (1 << 4)
-#define USBOTGSS_STANDBYMODE_SMRT		(1 << 5)
-#define USBOTGSS_STANDBYMODE_SMRT_WKUP (0x3 << 4)
-#define USBOTGSS_IDLEMODE_NOIDLE (1 << 2)
-#define USBOTGSS_IDLEMODE_SMRT (1 << 3)
-#define USBOTGSS_IDLEMODE_SMRT_WKUP (0x3 << 2)
-
-/* USBOTGSS_IRQENABLE_SET_0 bit */
-#define USBOTGSS_COREIRQ_EN	(1 << 0)
-
-/* USBOTGSS_IRQENABLE_SET_1 bits */
-#define USBOTGSS_IRQ_SET_1_IDPULLUP_FALL_EN	(1 << 0)
-#define USBOTGSS_IRQ_SET_1_DISCHRGVBUS_FALL_EN	(1 << 3)
-#define USBOTGSS_IRQ_SET_1_CHRGVBUS_FALL_EN	(1 << 4)
-#define USBOTGSS_IRQ_SET_1_DRVVBUS_FALL_EN	(1 << 5)
-#define USBOTGSS_IRQ_SET_1_IDPULLUP_RISE_EN	(1 << 8)
-#define USBOTGSS_IRQ_SET_1_DISCHRGVBUS_RISE_EN	(1 << 11)
-#define USBOTGSS_IRQ_SET_1_CHRGVBUS_RISE_EN	(1 << 12)
-#define USBOTGSS_IRQ_SET_1_DRVVBUS_RISE_EN	(1 << 13)
-#define USBOTGSS_IRQ_SET_1_OEVT_EN	(1 << 16)
-#define USBOTGSS_IRQ_SET_1_DMADISABLECLR_EN	(1 << 17)
-
-/*
- * USBOTGSS_WRAPPER registers
- */
-struct omap_dwc_wrapper {
-	u32 revision;
-
-	u32 reserve_1[3];
-
-	u32 sysconfig; /* offset of 0x10 */
-
-	u32 reserve_2[3];
-	u16 reserve_3;
-
-	u32 irqstatus_raw_0; /* offset of 0x24 */
-	u32 irqstatus_0;
-	u32 irqenable_set_0;
-	u32 irqenable_clr_0;
-
-	u32 irqstatus_raw_1; /* offset of 0x34 */
-	u32 irqstatus_1;
-	u32 irqenable_set_1;
-	u32 irqenable_clr_1;
-
-	u32 reserve_4[15];
-
-	u32 utmi_otg_ctrl; /* offset of 0x80 */
-	u32 utmi_otg_status;
-
-	u32 reserve_5[30];
-
-	u32 mram_offset; /* offset of 0x100 */
-	u32 fladj;
-	u32 dbg_config;
-	u32 dbg_data;
-	u32 dev_ebc_en;
-};
-
-/* XHCI PHY register structure */
-struct omap_usb3_phy {
-	u32 reserve1;
-	u32 pll_status;
-	u32 pll_go;
-	u32 pll_config_1;
-	u32 pll_config_2;
-	u32 pll_config_3;
-	u32 pll_ssc_config_1;
-	u32 pll_ssc_config_2;
-	u32 pll_config_4;
-};
-
-struct omap_xhci {
-	struct omap_dwc_wrapper *otg_wrapper;
-	struct omap_usb3_phy *usb3_phy;
-	struct xhci_hccr *hcd;
-	struct dwc3 *dwc3_reg;
-};
-
-#endif /* _ASM_ARCH_XHCI_OMAP_H_ */