ARM: uniphier: move headers out of include/mach directory

These headers are only included locally in arch/arm/mach-uniphier/.
There is no reason to export them by putting in the mach/ directory.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

1 files changed, 96 insertions, 0 deletions

diff --git a/arch/arm/mach-uniphier/sc-regs.h b/arch/arm/mach-uniphier/sc-regs.h
new file mode 100644
index 0000000000..474b82d243
--- /dev/null
+++ b/arch/arm/mach-uniphier/sc-regs.h
@@ -0,0 +1,96 @@
+/*
+ * UniPhier SC (System Control) block registers
+ *
+ * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef ARCH_SC_REGS_H
+#define ARCH_SC_REGS_H
+
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3)
+#define SC_BASE_ADDR			0xf1840000
+#else
+#define SC_BASE_ADDR			0x61840000
+#endif
+
+#define SC_DPLLOSCCTRL			(SC_BASE_ADDR | 0x1110)
+#define SC_DPLLOSCCTRL_DPLLST		(0x1 << 1)
+#define SC_DPLLOSCCTRL_DPLLEN		(0x1 << 0)
+
+#define SC_DPLLCTRL			(SC_BASE_ADDR | 0x1200)
+#define SC_DPLLCTRL_SSC_EN		(0x1 << 31)
+#define SC_DPLLCTRL_FOUTMODE_MASK        (0xf << 16)
+#define SC_DPLLCTRL_SSC_RATE		(0x1 << 15)
+
+#define SC_DPLLCTRL2			(SC_BASE_ADDR | 0x1204)
+#define SC_DPLLCTRL2_NRSTDS		(0x1 << 28)
+
+#define SC_DPLLCTRL3			(SC_BASE_ADDR | 0x1208)
+#define SC_DPLLCTRL3_LPFSEL_COEF2	(0x0 << 31)
+#define SC_DPLLCTRL3_LPFSEL_COEF3	(0x1 << 31)
+
+#define SC_UPLLCTRL			(SC_BASE_ADDR | 0x1210)
+
+#define SC_VPLL27ACTRL			(SC_BASE_ADDR | 0x1270)
+#define SC_VPLL27ACTRL2			(SC_BASE_ADDR | 0x1274)
+#define SC_VPLL27ACTRL3			(SC_BASE_ADDR | 0x1278)
+
+#define SC_VPLL27BCTRL			(SC_BASE_ADDR | 0x1290)
+#define SC_VPLL27BCTRL2			(SC_BASE_ADDR | 0x1294)
+#define SC_VPLL27BCTRL3			(SC_BASE_ADDR | 0x1298)
+
+#define SC_RSTCTRL			(SC_BASE_ADDR | 0x2000)
+#define SC_RSTCTRL_NRST_USB3B0		(0x1 << 17)	/* USB3 #0 bus */
+#define SC_RSTCTRL_NRST_USB3C0		(0x1 << 16)	/* USB3 #0 core */
+#define SC_RSTCTRL_NRST_ETHER		(0x1 << 12)
+#define SC_RSTCTRL_NRST_STDMAC		(0x1 << 10)
+#define SC_RSTCTRL_NRST_GIO		(0x1 <<  6)
+/* Pro4 or older */
+#define SC_RSTCTRL_NRST_UMC1		(0x1 <<  5)
+#define SC_RSTCTRL_NRST_UMC0		(0x1 <<  4)
+#define SC_RSTCTRL_NRST_NAND		(0x1 <<  2)
+
+#define SC_RSTCTRL2			(SC_BASE_ADDR | 0x2004)
+#define SC_RSTCTRL2_NRST_USB3B1		(0x1 << 17)	/* USB3 #1 bus */
+#define SC_RSTCTRL2_NRST_USB3C1		(0x1 << 16)	/* USB3 #1 core */
+
+#define SC_RSTCTRL3			(SC_BASE_ADDR | 0x2008)
+
+/* Pro5 or newer */
+#define SC_RSTCTRL4			(SC_BASE_ADDR | 0x200c)
+#define SC_RSTCTRL4_NRST_UMCSB		(0x1 << 12)	/* UMC system bus */
+#define SC_RSTCTRL4_NRST_UMCA2		(0x1 << 10)	/* UMC ch2 standby */
+#define SC_RSTCTRL4_NRST_UMCA1		(0x1 <<  9)	/* UMC ch1 standby */
+#define SC_RSTCTRL4_NRST_UMCA0		(0x1 <<  8)	/* UMC ch0 standby */
+#define SC_RSTCTRL4_NRST_UMC32		(0x1 <<  6)	/* UMC ch2 */
+#define SC_RSTCTRL4_NRST_UMC31		(0x1 <<  5)	/* UMC ch1 */
+#define SC_RSTCTRL4_NRST_UMC30		(0x1 <<  4)	/* UMC ch0 */
+
+#define SC_CLKCTRL			(SC_BASE_ADDR | 0x2104)
+#define SC_CLKCTRL_CEN_USB31		(0x1 << 17)	/* USB3 #1 */
+#define SC_CLKCTRL_CEN_USB30		(0x1 << 16)	/* USB3 #0 */
+#define SC_CLKCTRL_CEN_ETHER		(0x1 << 12)
+#define SC_CLKCTRL_CEN_MIO		(0x1 << 11)
+#define SC_CLKCTRL_CEN_STDMAC		(0x1 << 10)
+#define SC_CLKCTRL_CEN_GIO		(0x1 <<  6)
+/* Pro4 or older */
+#define SC_CLKCTRL_CEN_UMC		(0x1 <<  4)
+#define SC_CLKCTRL_CEN_NAND		(0x1 <<  2)
+#define SC_CLKCTRL_CEN_SBC		(0x1 <<  1)
+#define SC_CLKCTRL_CEN_PERI		(0x1 <<  0)
+
+/* Pro5 or newer */
+#define SC_CLKCTRL4			(SC_BASE_ADDR | 0x210c)
+#define SC_CLKCTRL4_CEN_UMCSB		(0x1 << 12)	/* UMC system bus */
+#define SC_CLKCTRL4_CEN_UMC2		(0x1 <<  2)	/* UMC ch2 */
+#define SC_CLKCTRL4_CEN_UMC1		(0x1 <<  1)	/* UMC ch1 */
+#define SC_CLKCTRL4_CEN_UMC0		(0x1 <<  0)	/* UMC ch0 */
+
+/* System reset control register */
+#define SC_IRQTIMSET			(SC_BASE_ADDR | 0x3000)
+#define SC_SLFRSTSEL			(SC_BASE_ADDR | 0x3010)
+#define SC_SLFRSTCTL			(SC_BASE_ADDR | 0x3014)
+
+#endif /* ARCH_SC_REGS_H */