Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm: (146 commits)
  arm: Use common .lds file where possible
  arm: add a common .lds link script
  arm: Remove unneeded setting of LDCSRIPT
  Define CPUDIR for the .lds link script
  arm: Remove zipitz2 link script
  Allow arch directory to contain .lds without requiring Makefile
  OMAP: Remove omap1610inn-based boards
  arch/arm/cpu/armv7/omap-common/clocks-common.c: Fix build warnings
  board/ti/beagle/beagle.c: Fix build warnings
  sdrc.c: Fix typo in do_sdrc_init() for SPL
  tegra: i2c: Add I2C driver
  tegra: fdt: i2c: Add extra I2C bindings for U-Boot
  tegra: i2c: Select I2C ordering for Seaboard
  tegra: i2c: Enable I2C on Seaboard
  tegra: i2c: Select number of controllers for Tegra2 boards
  tegra: i2c: Initialise I2C on Nvidia boards
  tegra: Enhance clock support to handle 16-bit clock divisors
  fdt: Add function to allow aliases to refer to multiple nodes
  tegra: Rename NV_PA_PMC_BASE to TEGRA2_PMC_BASE
  tegra: fdt: Enable FDT support for Ventana
  tegra: fdt: Enable FDT support for Seaboard
  tegra: usb: Enable USB on Seaboard
  tegra: usb: Add common USB defines for tegra2 boards
  tegra: usb: Add USB support to nvidia boards
  arm: Check for valid FDT after console is up
  fdt: Avoid early panic() when there is no FDT present
  tegra: usb: Add support for Tegra USB peripheral
  tegra: fdt: Add function to return peripheral/clock ID
  usb: Add support for txfifo threshold
  tegra: usb: fdt: Add USB definitions for Tegra2 Seaboard
  tegra: usb: fdt: Add additional device tree definitions for USB ports
  tegra: fdt: Add clock bindings for Tegra2 Seaboard
  tegra: fdt: Add clock bindings
  tegra: fdt: Add additional USB binding
  fdt: Add tegra-usb bindings file from linux
  fdt: Add staging area for device tree binding documentation
  tegra: fdt: Add device tree file for Tegra2 Seaboard from kernel
  tegra: fdt: Add Tegra2x device tree file from kernel
  arm: fdt: Add skeleton device tree file from kernel
  fdt: Add basic support for decoding GPIO definitions
  fdt: Add functions to access phandles, arrays and bools
  fdt: Tidy up a few fdtdec problems
  fdt: Add tests for fdtdec
  fdt: Add fdtdec_find_aliases() to deal with alias nodes
  arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer load
  net: fec_mxc: allow use with cache enabled
  net: force PKTALIGN to ARCH_DMA_MINALIGN
  i.MX28: Enable caches by default
  i.MX28: Make use of the bounce buffer
  i.MX28: Do data transfers via DMA in MMC driver
  MMC: Implement generic bounce buffer
  i.MX28: Add cache support to MXS NAND driver
  i.MX28: Add cache support into the APBH DMA driver
  ARM926EJS: Implement cache operations
  board/vpac270/onenand.c: Fix build errors
  nhk8815: fix build errors
  atmel-boards: add missing atmel_mci.h
  ARM: highbank: setup env from boot source register
  ARM: highbank: change env config to use nvram
  ARM: highbank: add reset support
  ARM: highbank: Add boot counter support
  ARM: highbank: change TEXT_BASE to 0x8000
  ARM: highbank: fix us_to_tick calculation
  ARM: highbank: add missing get_tbclk
  ARM: highbank: fix warning for calxedaxgmac_initialize
  net: calxedaxgmac: fix build due to missing __aligned definition
  EXYNOS: Add structure for Exynos4 DMC
  EXYNOS: SMDK5250: Support all 4 UARTs
  ARM: fix s3c2410 timer code
  ARM: davinci: fixes for cam_enc_4xx board
  omap3_spi: receive transmit mode
  calimain, enbw_cmc: Fix typo in comments
  Davinci: ea20: use gpio framework to access gpios
  OMAP3: mt_ventoux: sets its own mtdparts
  OMAP3: mt_ventoux: updated timing for FPGA
  twl4030: fix potential power supply handling issues
  NAND: TI: fix warnings in omap_gpmc.c
  cam_enc_4xx: Rename 'images' to 'imgs'
  arm: Add Prep subcommand support to bootm
  OMAP3: twister: add support to boot Linux from SPL
  SPL: call cleanup_before_linux() before booting Linux
  OMAP3: SPL: do not call I2C init if no I2C is set.
  Add cache functions to SPL for armv7
  devkit8000: Implement and activate direct OS boot
  omap/spl: change output of spl_parse_image_header
  omap-common/spl: Add linux boot to SPL
  devkit8000/spl: init GPMC for dm9000 in SPL
  omap-common: Add NAND SPL linux booting
  devkit8000: add config for spl command
  Add cmd_spl command
  mx53ard: Initialize return code with error
  mx53: Make PLL2 to be the parent of UART clock
  configs: imx: Use CONFIG_SF_DEFAULT_CS
  mx28evk: Provide default values for SPI bus and chip select
  USB: ehci-mx6: Add proper IO accessors
  mx6: Read silicon revision from register
  i.MX28: Drop __naked function from spl_mem_init
  mxs_spi: Return proper timeout error
  i.MX28: Make the stabilization delays shorter
  pmic_i2c: Return error in case of invalid pmic_i2c_tx_num
  mx6: Remove duplicate definition of ANATOP_BASE_ADDR
  mx6: Fix reset cause for Power On Reset case
  i.MX6: mx6qsabrelite: add MACH_TYPE_MX6Q_SABRELITE
  i.MX6: mx6q_sabrelite: add CONFIG_REVISION_TAG
  i.MX28: Enable additional DRAM address bits
  mx6q: mx6qsabrelite: setup_spi() should be called in board_init to allow use for environment
  mx31: add "ARM11P power gating" to get_reset_cause
  mx31pdk: Fix CONFIG_SYS_MEMTEST_END
  efikamx: Fix CONFIG_SYS_MEMTEST_END
  mx53smd: Fix CONFIG_SYS_MEMTEST_END
  mx53evk: Fix CONFIG_SYS_MEMTEST_END
  mx51evk: Fix CONFIG_SYS_MEMTEST_END
  i.MX6: mx6qsabrelite: add ext2 support
  imximage: Remove overwriting of flash_offset
  IXP: Fix GPIO_INT_ACT_LOW_SET()
  IXP: Fix NAND build warning on PDNB3 and SCPU
  IXP: Move PDNB3 and SCPU from Makefile to boards.cfg
  IXP: Squash warnings in IXP NPE
  IXP: Fix missing MACH_TYPE_{ACTUX?,PNB3,DVLHOST}
  IXP: Make IXP buildable with arm-linux- toolchains
  Examples: Properly append LDFLAGS to LD command
  SPL: Enable YMODEM support on BeagleBone and AM335x EVM
  SPL: Add YMODEM over UART load support
  SPL: Add README.omap3
  README: document more SPL config options
  spl.c: Use __noreturn decorator
  config.mk: Check for -fstack-usage support
  config.mk: Make cc-option create a file under include/generated
  ...

3 files changed, 191 insertions, 171 deletions

diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 300c8fab2d..39a9550376 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -39,8 +39,6 @@ GLCOBJS	+= div0.o
 
 COBJS-y	+= board.o
 COBJS-y	+= bootm.o
-COBJS-y	+= cache.o
-COBJS-y	+= cache-cp15.o
 COBJS-$(CONFIG_SYS_L2_PL310) += cache-pl310.o
 COBJS-y	+= interrupts.o
 COBJS-y	+= reset.o
@@ -48,6 +46,9 @@ SOBJS-$(CONFIG_USE_ARCH_MEMSET) += memset.o
 SOBJS-$(CONFIG_USE_ARCH_MEMCPY) += memcpy.o
 endif
 
+COBJS-y	+= cache.o
+COBJS-y	+= cache-cp15.o
+
 SRCS	:= $(GLSOBJS:.o=.S) $(GLCOBJS:.o=.c) \
 	   $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index b9b35de61a..5270c11262 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -293,6 +293,14 @@ void board_init_f(ulong bootflag)
 		}
 	}
 
+#ifdef CONFIG_OF_CONTROL
+	/* For now, put this check after the console is ready */
+	if (fdtdec_prepare_fdt()) {
+		panic("** CONFIG_OF_CONTROL defined but no FDT - please see "
+			"doc/README.fdt-control");
+	}
+#endif
+
 	debug("monitor len: %08lX\n", gd->mon_len);
 	/*
 	 * Ram is setup, size stored in gd !!
diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c
index 2961ab2ac6..160ba55111 100644
--- a/arch/arm/lib/bootm.c
+++ b/arch/arm/lib/bootm.c
@@ -1,4 +1,8 @@
-/*
+/* Copyright (C) 2011
+ * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de>
+ *  - Added prep subcommand support
+ *  - Reorganized source - modeled after powerpc version
+ *
  * (C) Copyright 2002
  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
  * Marius Groeger <mgroeger@sysgo.de>
@@ -29,35 +33,26 @@
 #include <fdt.h>
 #include <libfdt.h>
 #include <fdt_support.h>
+#include <asm/bootm.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined (CONFIG_SETUP_MEMORY_TAGS) || \
-    defined (CONFIG_CMDLINE_TAG) || \
-    defined (CONFIG_INITRD_TAG) || \
-    defined (CONFIG_SERIAL_TAG) || \
-    defined (CONFIG_REVISION_TAG)
-static void setup_start_tag (bd_t *bd);
-
-# ifdef CONFIG_SETUP_MEMORY_TAGS
-static void setup_memory_tags (bd_t *bd);
-# endif
-static void setup_commandline_tag (bd_t *bd, char *commandline);
-
-# ifdef CONFIG_INITRD_TAG
-static void setup_initrd_tag (bd_t *bd, ulong initrd_start,
-			      ulong initrd_end);
-# endif
-static void setup_end_tag (bd_t *bd);
-
+#if defined(CONFIG_SETUP_MEMORY_TAGS) || \
+	defined(CONFIG_CMDLINE_TAG) || \
+	defined(CONFIG_INITRD_TAG) || \
+	defined(CONFIG_SERIAL_TAG) || \
+	defined(CONFIG_REVISION_TAG)
 static struct tag *params;
-#endif /* CONFIG_SETUP_MEMORY_TAGS || CONFIG_CMDLINE_TAG || CONFIG_INITRD_TAG */
-
-static ulong get_sp(void);
-#if defined(CONFIG_OF_LIBFDT)
-static int bootm_linux_fdt(int machid, bootm_headers_t *images);
 #endif
 
+static ulong get_sp(void)
+{
+	ulong ret;
+
+	asm("mov %0, sp" : "=r"(ret) : );
+	return ret;
+}
+
 void arch_lmb_reserve(struct lmb *lmb)
 {
 	ulong sp;
@@ -80,89 +75,7 @@ void arch_lmb_reserve(struct lmb *lmb)
 		    gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size - sp);
 }
 
-static void announce_and_cleanup(void)
-{
-	printf("\nStarting kernel ...\n\n");
-	bootstage_mark_name(BOOTSTAGE_ID_BOOTM_HANDOFF, "start_kernel");
-#ifdef CONFIG_BOOTSTAGE_REPORT
-	bootstage_report();
-#endif
-
-#ifdef CONFIG_USB_DEVICE
-	{
-		extern void udc_disconnect(void);
-		udc_disconnect();
-	}
-#endif
-	cleanup_before_linux();
-}
-
-int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
-{
-	bd_t	*bd = gd->bd;
-	char	*s;
-	int	machid = bd->bi_arch_number;
-	void	(*kernel_entry)(int zero, int arch, uint params);
-
-#ifdef CONFIG_CMDLINE_TAG
-	char *commandline = getenv ("bootargs");
-#endif
-
-	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
-		return 1;
-
-	s = getenv ("machid");
-	if (s) {
-		machid = simple_strtoul (s, NULL, 16);
-		printf ("Using machid 0x%x from environment\n", machid);
-	}
-
-	bootstage_mark(BOOTSTAGE_ID_RUN_OS);
-
 #ifdef CONFIG_OF_LIBFDT
-	if (images->ft_len)
-		return bootm_linux_fdt(machid, images);
-#endif
-
-	kernel_entry = (void (*)(int, int, uint))images->ep;
-
-	debug ("## Transferring control to Linux (at address %08lx) ...\n",
-	       (ulong) kernel_entry);
-
-#if defined (CONFIG_SETUP_MEMORY_TAGS) || \
-    defined (CONFIG_CMDLINE_TAG) || \
-    defined (CONFIG_INITRD_TAG) || \
-    defined (CONFIG_SERIAL_TAG) || \
-    defined (CONFIG_REVISION_TAG)
-	setup_start_tag (bd);
-#ifdef CONFIG_SERIAL_TAG
-	setup_serial_tag (&params);
-#endif
-#ifdef CONFIG_REVISION_TAG
-	setup_revision_tag (&params);
-#endif
-#ifdef CONFIG_SETUP_MEMORY_TAGS
-	setup_memory_tags (bd);
-#endif
-#ifdef CONFIG_CMDLINE_TAG
-	setup_commandline_tag (bd, commandline);
-#endif
-#ifdef CONFIG_INITRD_TAG
-	if (images->rd_start && images->rd_end)
-		setup_initrd_tag (bd, images->rd_start, images->rd_end);
-#endif
-	setup_end_tag(bd);
-#endif
-
-	announce_and_cleanup();
-
-	kernel_entry(0, machid, bd->bi_boot_params);
-	/* does not return */
-
-	return 1;
-}
-
-#if defined(CONFIG_OF_LIBFDT)
 static int fixup_memory_node(void *blob)
 {
 	bd_t	*bd = gd->bd;
@@ -177,60 +90,30 @@ static int fixup_memory_node(void *blob)
 
 	return fdt_fixup_memory_banks(blob, start, size, CONFIG_NR_DRAM_BANKS);
 }
+#endif
 
-static int bootm_linux_fdt(int machid, bootm_headers_t *images)
+static void announce_and_cleanup(void)
 {
-	ulong rd_len;
-	void (*kernel_entry)(int zero, int dt_machid, void *dtblob);
-	ulong of_size = images->ft_len;
-	char **of_flat_tree = &images->ft_addr;
-	ulong *initrd_start = &images->initrd_start;
-	ulong *initrd_end = &images->initrd_end;
-	struct lmb *lmb = &images->lmb;
-	int ret;
-
-	kernel_entry = (void (*)(int, int, void *))images->ep;
-
-	boot_fdt_add_mem_rsv_regions(lmb, *of_flat_tree);
-
-	rd_len = images->rd_end - images->rd_start;
-	ret = boot_ramdisk_high(lmb, images->rd_start, rd_len,
-				initrd_start, initrd_end);
-	if (ret)
-		return ret;
-
-	ret = boot_relocate_fdt(lmb, of_flat_tree, &of_size);
-	if (ret)
-		return ret;
-
-	debug("## Transferring control to Linux (at address %08lx) ...\n",
-	       (ulong) kernel_entry);
-
-	fdt_chosen(*of_flat_tree, 1);
-
-	fixup_memory_node(*of_flat_tree);
-
-	fdt_fixup_ethernet(*of_flat_tree);
-
-	fdt_initrd(*of_flat_tree, *initrd_start, *initrd_end, 1);
-
-	announce_and_cleanup();
-
-	kernel_entry(0, machid, *of_flat_tree);
-	/* does not return */
+	printf("\nStarting kernel ...\n\n");
+	bootstage_mark_name(BOOTSTAGE_ID_BOOTM_HANDOFF, "start_kernel");
+#ifdef CONFIG_BOOTSTAGE_REPORT
+	bootstage_report();
+#endif
 
-	return 1;
-}
+#ifdef CONFIG_USB_DEVICE
+	udc_disconnect();
 #endif
+	cleanup_before_linux();
+}
 
-#if defined (CONFIG_SETUP_MEMORY_TAGS) || \
-    defined (CONFIG_CMDLINE_TAG) || \
-    defined (CONFIG_INITRD_TAG) || \
-    defined (CONFIG_SERIAL_TAG) || \
-    defined (CONFIG_REVISION_TAG)
+#if defined(CONFIG_SETUP_MEMORY_TAGS) || \
+	defined(CONFIG_CMDLINE_TAG) || \
+	defined(CONFIG_INITRD_TAG) || \
+	defined(CONFIG_SERIAL_TAG) || \
+	defined(CONFIG_REVISION_TAG)
 static void setup_start_tag (bd_t *bd)
 {
-	params = (struct tag *) bd->bi_boot_params;
+	params = (struct tag *)bd->bi_boot_params;
 
 	params->hdr.tag = ATAG_CORE;
 	params->hdr.size = tag_size (tag_core);
@@ -241,10 +124,10 @@ static void setup_start_tag (bd_t *bd)
 
 	params = tag_next (params);
 }
-
+#endif
 
 #ifdef CONFIG_SETUP_MEMORY_TAGS
-static void setup_memory_tags (bd_t *bd)
+static void setup_memory_tags(bd_t *bd)
 {
 	int i;
 
@@ -258,10 +141,10 @@ static void setup_memory_tags (bd_t *bd)
 		params = tag_next (params);
 	}
 }
-#endif /* CONFIG_SETUP_MEMORY_TAGS */
-
+#endif
 
-static void setup_commandline_tag (bd_t *bd, char *commandline)
+#ifdef CONFIG_CMDLINE_TAG
+static void setup_commandline_tag(bd_t *bd, char *commandline)
 {
 	char *p;
 
@@ -285,10 +168,10 @@ static void setup_commandline_tag (bd_t *bd, char *commandline)
 
 	params = tag_next (params);
 }
-
+#endif
 
 #ifdef CONFIG_INITRD_TAG
-static void setup_initrd_tag (bd_t *bd, ulong initrd_start, ulong initrd_end)
+static void setup_initrd_tag(bd_t *bd, ulong initrd_start, ulong initrd_end)
 {
 	/* an ATAG_INITRD node tells the kernel where the compressed
 	 * ramdisk can be found. ATAG_RDIMG is a better name, actually.
@@ -301,10 +184,10 @@ static void setup_initrd_tag (bd_t *bd, ulong initrd_start, ulong initrd_end)
 
 	params = tag_next (params);
 }
-#endif /* CONFIG_INITRD_TAG */
+#endif
 
 #ifdef CONFIG_SERIAL_TAG
-void setup_serial_tag (struct tag **tmp)
+void setup_serial_tag(struct tag **tmp)
 {
 	struct tag *params = *tmp;
 	struct tag_serialnr serialnr;
@@ -332,19 +215,147 @@ void setup_revision_tag(struct tag **in_params)
 	params->u.revision.rev = rev;
 	params = tag_next (params);
 }
-#endif  /* CONFIG_REVISION_TAG */
+#endif
 
-static void setup_end_tag (bd_t *bd)
+#if defined(CONFIG_SETUP_MEMORY_TAGS) || \
+	defined(CONFIG_CMDLINE_TAG) || \
+	defined(CONFIG_INITRD_TAG) || \
+	defined(CONFIG_SERIAL_TAG) || \
+	defined(CONFIG_REVISION_TAG)
+static void setup_end_tag(bd_t *bd)
 {
 	params->hdr.tag = ATAG_NONE;
 	params->hdr.size = 0;
 }
-#endif /* CONFIG_SETUP_MEMORY_TAGS || CONFIG_CMDLINE_TAG || CONFIG_INITRD_TAG */
+#endif
 
-static ulong get_sp(void)
+#ifdef CONFIG_OF_LIBFDT
+static int create_fdt(bootm_headers_t *images)
 {
-	ulong ret;
+	ulong of_size = images->ft_len;
+	char **of_flat_tree = &images->ft_addr;
+	ulong *initrd_start = &images->initrd_start;
+	ulong *initrd_end = &images->initrd_end;
+	struct lmb *lmb = &images->lmb;
+	ulong rd_len;
+	int ret;
 
-	asm("mov %0, sp" : "=r"(ret) : );
-	return ret;
+	debug("using: FDT\n");
+
+	boot_fdt_add_mem_rsv_regions(lmb, *of_flat_tree);
+
+	rd_len = images->rd_end - images->rd_start;
+	ret = boot_ramdisk_high(lmb, images->rd_start, rd_len,
+			initrd_start, initrd_end);
+	if (ret)
+		return ret;
+
+	ret = boot_relocate_fdt(lmb, of_flat_tree, &of_size);
+	if (ret)
+		return ret;
+
+	fdt_chosen(*of_flat_tree, 1);
+	fixup_memory_node(*of_flat_tree);
+	fdt_initrd(*of_flat_tree, *initrd_start, *initrd_end, 1);
+
+	return 0;
+}
+#endif
+
+/* Subcommand: PREP */
+static void boot_prep_linux(bootm_headers_t *images)
+{
+#ifdef CONFIG_CMDLINE_TAG
+	char *commandline = getenv("bootargs");
+#endif
+
+#ifdef CONFIG_OF_LIBFDT
+	if (images->ft_len) {
+		debug("using: FDT\n");
+		if (create_fdt(images)) {
+			printf("FDT creation failed! hanging...");
+			hang();
+		}
+	} else
+#endif
+	{
+#if defined(CONFIG_SETUP_MEMORY_TAGS) || \
+	defined(CONFIG_CMDLINE_TAG) || \
+	defined(CONFIG_INITRD_TAG) || \
+	defined(CONFIG_SERIAL_TAG) || \
+	defined(CONFIG_REVISION_TAG)
+		debug("using: ATAGS\n");
+		setup_start_tag(gd->bd);
+#ifdef CONFIG_SERIAL_TAG
+		setup_serial_tag(&params);
+#endif
+#ifdef CONFIG_CMDLINE_TAG
+		setup_commandline_tag(gd->bd, commandline);
+#endif
+#ifdef CONFIG_REVISION_TAG
+		setup_revision_tag(&params);
+#endif
+#ifdef CONFIG_SETUP_MEMORY_TAGS
+		setup_memory_tags(gd->bd);
+#endif
+#ifdef CONFIG_INITRD_TAG
+		if (images->rd_start && images->rd_end)
+			setup_initrd_tag(gd->bd, images->rd_start,
+			images->rd_end);
+#endif
+		setup_end_tag(gd->bd);
+#else /* all tags */
+		printf("FDT and ATAGS support not compiled in - hanging\n");
+		hang();
+#endif /* all tags */
+	}
+}
+
+/* Subcommand: GO */
+static void boot_jump_linux(bootm_headers_t *images)
+{
+	unsigned long machid = gd->bd->bi_arch_number;
+	char *s;
+	void (*kernel_entry)(int zero, int arch, uint params);
+
+	kernel_entry = (void (*)(int, int, uint))images->ep;
+
+	s = getenv("machid");
+	if (s) {
+		strict_strtoul(s, 16, &machid);
+		printf("Using machid 0x%lx from environment\n", machid);
+	}
+
+	debug("## Transferring control to Linux (at address %08lx)" \
+		"...\n", (ulong) kernel_entry);
+	bootstage_mark(BOOTSTAGE_ID_RUN_OS);
+	announce_and_cleanup();
+	kernel_entry(0, machid, gd->bd->bi_boot_params);
+}
+
+/* Main Entry point for arm bootm implementation
+ *
+ * Modeled after the powerpc implementation
+ * DIFFERENCE: Instead of calling prep and go at the end
+ * they are called if subcommand is equal 0.
+ */
+int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
+{
+	/* No need for those on ARM */
+	if (flag & BOOTM_STATE_OS_BD_T || flag & BOOTM_STATE_OS_CMDLINE)
+		return -1;
+
+	if (flag & BOOTM_STATE_OS_PREP) {
+		boot_prep_linux(images);
+		return 0;
+	}
+
+	if (flag & BOOTM_STATE_OS_GO) {
+		boot_jump_linux(images);
+		return 0;
+	}
+
+	boot_prep_linux(images);
+	boot_jump_linux(images);
+	return 0;
 }